A specialized type of medical scissors specifically designed to cut through clothing, jewelry, and other materials in a medical emergency without injuring the patient.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED80968*)
AQPMJCUT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE CUTTING PORTION OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQPMJAA2.0*;AQPMJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQZMDCUT TYPE
INDICATES THE TYPE OF CUT PROVIDED.
Enter the applicable reply code from the table below
(AQZMDFT*;AQZMDAF$DAK*)
| Table 1 |
| Reply Code (AL18) | Reply |
| AF | COARSE |
| FT | EXTRA COARSE |
| AK | FINE |
CYMRDBLADE SHAPE
THE PHYSICAL CONFIGURATION OF THE BLADE.
Enter the applicable reply code from the table below
(CYMRDAZF*;CYMRDATG$DBNB*;CYMRDATG$$DBNB*)
| Table 1 |
| Reply Code (AD07) | Reply |
| BNA | ANGLE ON FLAT |
| AZF | ANGLE TO HANDLE |
| BNB | ANGLE TO SIDE JAW |
| AAE | ANGULAR |
| ABF | BLUNT |
| ACC | CONE |
| AZM | CUPPED |
| ACY | CURVED |
| AZN | CURVED DOWN |
| AZP | CURVED LEFT |
| BLL | CURVED ON FLAT |
| AZQ | CURVED RIGHT |
| AZR | CURVED UP |
| AFC | FLAT |
| AZT | FULL CURVED |
| AZX | HALF CURVED |
| BLJ | LIGHT CURVED |
| BNC | LIGHTLY ANGLED |
| BAE | MEDIUM CURVED |
| AMM | POINTED |
| BAH | POINTED CONE |
| BAJ | QUARTER CURVED |
| BAK | RIGHT ANGLE |
| APG | RING |
| APL | ROUND |
| BAR | SHARP CURVED |
| ASL | SQUARE |
| ATG | STRAIGHT |
| AWS | TAPERED |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDTTA000*;MATT3AEEDTTA000$DTTB000*;MATT3AEEDTTA000$$DTTB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEG | BLADE |
| 3CZK | HANDGRIP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HQU | TIP INSERT(S) |
| 3IBS | OVERALL EXCEPT HANDGRIP |
| Table 2 |
| Reply Code (MA01) | Reply |
| NLA000 | NICKEL |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| TNB000 | TUNGSTEN CARBIDE |
AJLB*ABLADE QUANTITY
THE NUMBER OF INDIVIDUAL BLADES INCLUDED.
Enter the numeric reply with a minimum of one digit.
(AJLBA10*)
ANCT*DBLADE TYPE
INDICATES THE TYPE OF BLADE PROVIDED.
Enter the applicable reply code from the table below
(ANCTDDH*;ANCTDEE$$DCJ*)
| Table 1 |
| Reply Code (AJ46) | Reply |
| BS | ADJUSTABLE |
| EK | ALLIGATOR |
| A | ANY ACCEPTABLE |
| BW | CUTTING |
| EL | DELICATE |
| EM | DISSECTING |
| EN | DOUBLE BEVEL |
| AC | DOUBLE EDGE |
| BX | DOUBLE JOINT |
| BY | FENESTRATED |
| AL | GROOVE |
| EP | HOOK |
| CF | OSCILLATING |
| CJ | PRONGED |
| EE | RECIPROCATING |
| CL | ROTATING |
| AP | SCISSORS |
| ED | SEMI-SHARP |
| CN | SERRATED |
| CS | SHARP |
| DH | SHARP POINTED |
| EQ | SINGLE BEVEL |
| AB | SINGLE EDGE |
| CW | SOLID |
AMXP*BBLADE ANGLE IN DEG
THE ANGLE OF BLADE PITCH MEASURED FROM THE PLANE OF ROTATION AT A SPECIFIED LOCATION,EXPRESSED IN DEGREES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AMXPB2.0)
BYNJ*DBLADE POINT TYPE
INDICATES THE TYPE OF BLADE POINT(S) PROVIDED.
Enter the applicable reply code from the table below
(BYNJDAPN*;BYNJDACU$$DAHB*)
| Table 1 |
| Reply Code (AJ44) | Reply |
| A | ANY ACCEPTABLE |
| AFY | BAYONET |
| AFZ | BEVEL |
| AGA | BLUNT |
| AGC | BOTH BLUNT |
| ABV | BOTH ENDS |
| ABU | BOTH ENDS, BLUNT |
| ACU | BOTH ENDS, SERRATED |
| AGD | BOTH SHARP |
| ABP | FINE |
| AGN | NEEDLE |
| AGQ | ONE BLUNT |
| ACV | ONE END |
| ADV | ONE END, CONICAL HEAD |
| AEU | ONE END, FLAT HEAD |
| AEV | ONE END, HOOK |
| AFU | ONE END, PROBE |
| ADU | ONE END, SICKLE SHAPED |
| AFV | ONE END, THREAD BORE |
| AGR | ONE SHARP |
| AGT | PROBE HOOK |
| APJ | PROBE TIP |
| AGU | PROBE-END |
| AGX | ROUND BLUNT |
| APK | ROUND SHARP |
| APL | ROUND SMOOTH |
| APM | ROUND TIP |
| APN | SEMI-SHARP |
| AHA | SHARP |
| APP | SMOOTH |
| AHB | STANDARD |
| APQ | WIRE |
ADQF*DHANDLE TYPE
INDICATES THE TYPE OF HANDLE DESIGNED TO BE ATTACHED TO OR THROUGH AN ITEM FOR THE PURPOSE OF OPENING,LIFTING,CLOSING,OR THE LIKE.
Enter the applicable reply code from the table below
(ADQFDBM*;ADQFDBL$DBH*;ADQFDBL$$DBH*)
| Table 1 |
| Reply Code (AC55) | Reply |
| FL | ANGULAR |
| A | ANY ACCEPTABLE |
| FQ | CURVED |
| FS | DETACHABLE |
| BM | FOLDING |
| FW | HEX |
| DG | HOLLOW |
| AE | HOOK |
| JG | KNURLED |
| GQ | NONDETACHABLE |
| GB | OLIVARY |
| GE | PIVOTED LEVER |
| GF | RECTANGULAR |
| GG | REVERSIBLE |
| FJ | RING |
| BG | SOLID |
| JR | SPRING |
| GM | SQUARE |
| AR | STRAIGHT |
| BH | SWIVEL |
| BL | TAPERED |
AQNA*DGRIP TYPE
INDICATES THE TYPE OF GRIP ON THE ITEM.
Enter the applicable reply code from the table below
(AQNADABV*;AQNADAAF$DACN*;AQNADAAF$$DACN*)
| Table 1 |
| Reply Code (AL17) | Reply |
| AAB | BULBOUS |
| ABH | CORRUGATED |
| ACQ | DOUBLE SPRING |
| ACT | DOUBLE SPRING/JOINT |
| ACM | EQUAL RINGS |
| AAC | FINGER RING |
| ABJ | FLUTED |
| ABC | KNURLED |
| AAD | ONE HAND |
| ABU | ONE HORN |
| ABV | ONE HORN EACH |
| AAG | SERRATED |
| ACK | SLIDING RING |
| ACH | SMOOTH |
| ACP | SPRING |
| ACS | SPRING/ROLLER |
| ABE | STRAIGHT |
| AAF | TWO HAND |
| ACN | UNEQUAL RINGS |
AASN*JHANDLE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE HANDLE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASNJAA2.0*;AASNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
APGG*GSIZE DESIGNATOR
A DESIGNATION INDICATING THE SIZE BY WHICH THE ITEM IS COMMERCIALLY KNOWN AND/OR IDENTIFIED.
Enter clear text.
(APGGGCLEARTEXT)
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDEDM*;CBBLDEMD$$DAQS*)
| Table 1 |
| Reply Code (AN47) | Reply |
| ELY | DETACHABLE BLADE EDGE |
| AQE | DISPOSABLE |
| CZW | FLEXIBLE |
| EDM | FLEXIBLE SHAFT |
| ELZ | HANDLE END LOCKING |
| EMA | NONDETACHABLE BLADE EDGE |
| EMB | NONSELF-RETAINING |
| EMC | REINFORCEMENT BLADE |
| AQS | REUSABLE |
| DJT | RIGID |
| EDR | RIGID SHAFT |
| EJN | SELF-RETAINING |
| EMD | SHANKS LOCKING DEVICE |
| AFM | STERILE |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information