A chemical liquid agent designed to retard the advancement of fire. It may or may not be colored. It is primarily used to help fight forest fires. Excludes:FIRE EXTINGUISHING AGENT,LIGUID,TRIMETHOXYBOROXINE.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED80763*)
BNHCDCHEMICAL TYPE
INDICATES THE TYPE OF CHEMICAL PROVIDED.
Enter the applicable reply code from the table below
(BNHCDB4509*;BNHCDB4508$DB4508*;BNHCDB4508$$DB4508*)
| Table 1 |
| Reply Code (AG54) | Reply |
| B4508 | AMMONIUM |
| B4509 | POLYPHOSPHATES |
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDCL0000*;HUESDBU0056$DBU0000*;HUESDBU0056$$DBU0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| CL0000 | CLEAR |
| CR0000 | CREAM |
| BU0056 | CYAN |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| RE0000 | RED |
| WH0000 | WHITE |
AGXWDPHYSICAL FORM
THE RECOGNIZED SHAPE, CONFIGURATION, STRUCTURE, OR MOLD OF A SUBSTANCE, NATURAL OR REFINED, THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Enter the applicable reply code from the table below
(AGXWDACG*;AGXWDAAEW$DAAAL*;AGXWDAAEW$$DAAAL*)
| Table 1 |
| Reply Code (AE98) | Reply |
| AAFE | AEROSOL |
| ACW | COMPRESSED |
| AAFU | FOAM |
| AAEW | GAS |
| AAAL | LIQUID |
| AAW | MICROCRYSTALLINE POWDER |
| ABC | POWDER |
| ABT | SPRINKLER |
| ACG | SUSPENSION |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAN*;BBRGDAQ$DAA*;BBRGDAQ$$DAA*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AB | ABOVE GROUND MAGAZINE |
| AC | CLOSED SHED |
| AP | CONTROLLED HUMIDITY HEATED WAREHOUSE |
| AQ | CONTROLLED HUMIDITY UNHEATED WAREHOUSE |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AT | DOCK LEVEL HEATED WAREHOUSE |
| AX | DOCK LEVEL UNHEATED WAREHOUSE |
| AY | GENERAL PURPOSE HEATED WAREHOUSE |
| AZ | GENERAL PURPOSE UNHEATED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AS | GROUND LEVEL HEATED WAREHOUSE |
| AW | GROUND LEVEL UNHEATED WAREHOUSE |
| AN | HEATED WAREHOUSE |
| BC | HEATED-DEHUMIDIFIED |
| AF | IGLOO MAGAZINE |
| AG | IMPROVED OPEN |
| AH | OPEN SHED |
| BD | OPEN STORAGE |
| AA | REFRIGERATED WAREHOUSE |
| BF | REFRIGERATOR LOCKER |
| AR | SHED |
| AL | TEMPERATURE CONTROLLED WAREHOUSE |
| AJ | UNHEATED WAREHOUSE |
| AK | UNIMPROVED OPEN |
| BE | VENTILATED WAREHOUSE |
AJCN*DPROTECTIVE STORAGE FEATURE
THE PECULIAR STORAGE FEATURE/S/ REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(AJCNDABG*;AJCNDAFB$DAGX*;AJCNDAFB$$DAGX*)
| Table 1 |
| Reply Code (AA65) | Reply |
| AHY | CONTROLLED ROOM TEMPERATURE |
| AAP | HEAT RESISTANT |
| ABG | THERMAL SHOCK RESISTANT |
| AGX | VAULT STORAGE |
| AFB | VENTILATED |
BBRC*JCOMPOSITION AND PERCENTAGE
THE VALUES/S/ OF THE ELEMENT,COMPOUND,OR MIXTURE OF WHICH THE COMPOSITION IS FABRICATED,EXCLUDING IMPURITIES.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BBRCJCBVB09372.0*;BBRCJCBVB09372.0$$JCBVB09372.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AG55) | Reply |
| AB | ACTIVE INGREDIENT |
| DE | ACTIVE INGREDIENT PER ML |
| AP | BLANK |
| AQ | BY VOLUME |
| AR | BY WEIGHT |
| BZ | EQUIVALENT |
| AC | EQUIVALENT OF BASE |
| AF | EQUIVALENT OF BASE PER CUBIC CENTIMETER |
| AY | EQUIVALENT OF BASE PER CUBIC CENTIMETER OF RECONSTITUTED SOLUTION |
| AZ | EQUIVALENT OF BASE PER CUBIC CENTIMETER OF RECONSTITUTED SUSPENSION |
| BA | EQUIVALENT OF BASE PER GRAM |
| BC | EQUIVALENT OF BASE PER MICROGRAM |
| BB | EQUIVALENT OF BASE PER MILLIGRAM |
| BT | EQUIVALENT OF BASE PER MILLILITER |
| AD | EQUIVALENT OF COMPOUND |
| AH | EQUIVALENT OF COMPOUND PER CUBIC CENTIMETER |
| BD | EQUIVALENT OF COMPOUND PER CUBIC CENTIMETER OF RECONSTITUTED SUSPENSION |
| AJ | EQUIVALENT OF COMPOUND PER GRAM |
| BW | EQUIVALENT OF COMPOUND PER MILLILITER |
| AE | EQUIVALENT OF NEGATIVE RADICAL |
| AG | EQUIVALENT OF NEGATIVE RADICAL PER CUBIC CENTIMETER |
| BF | EQUIVALENT OF NEGATIVE RADICAL PER CUBIC CENTIMETER OF RECONSTITUTED SOLUTION |
| BG | EQUIVALENT OF NEGATIVE RADICAL PER CUBIC CENTIMETER OF RECONSTITUTED SUSPENSION |
| BR | EQUIVALENT OF NEGATIVE RADICAL PER GRAM |
| BE | EQUIVALENT OF NEGATIVE RADICAL PER MICROGRAM |
| BQ | EQUIVALENT OF NEGATIVE RADICAL PER MILLIGRAM |
| BX | EQUIVALENT OF NEGATIVE RADICAL PER MILLILITER |
| DD | EQUIVALENT PER 0.20 MILLILITERS |
| AA | EQUIVALENT PER 0.5 MILLILITERS |
| CS | EQUIVALENT PER 5 MILLILITERS |
| CT | EQUIVALENT PER 5 MILLILITERS OF RECONSTITUTED SOLUTION |
| CU | EQUIVALENT PER 5 MILLILITERS OF RECONSTITUTED SUSPENSION |
| CA | EQUIVALENT PER GRAM |
| CJ | EQUIVALENT PER LITER |
| CB | EQUIVALENT PER LITER OF RECONSTITUTED SOLUTION |
| CC | EQUIVALENT PER LITER OF RECONSTITUTED SUSPENSION |
| CD | EQUIVALENT PER MICROGRAM |
| CK | EQUIVALENT PER MILLIGRAM |
| CL | EQUIVALENT PER MILLILITER |
| CE | EQUIVALENT PER MILLILITER OF RECONSTITUTED SOLUTION |
| CF | EQUIVALENT PER MILLILITER OF RECONSTITUTED SUSPENSION |
| AV | EXTENDED RELEASE |
| AK | METRIC VOLUME |
| AU | PER 0.5 MILLILITERS |
| DF | PER 0.6 MILLILITERS |
| CZ | PER 10 OUNCES |
| DC | PER 100 MILLILITERS |
| CY | PER 15 MILLILITERS |
| DH | PER 2 MILLILITERS |
| DA | PER 20 CC |
| BV | PER 20 MILLILITERS |
| CX | PER 5 GRAMS |
| CM | PER 5 MILLILITERS |
| CQ | PER 5 MILLILITERS OF RECONSTITUTED SOLUTION |
| CR | PER 5 MILLILITERS OF RECONSTITUTED SUSPENSION |
| DG | PER 6.4 GRAMS |
| DB | PER CC |
| AL | PER CUBIC CENTIMETER |
| BH | PER CUBIC CENTIMETER OF RECONSTITUTED SOLUTION |
| BJ | PER CUBIC CENTIMETER OF RECONSTITUTED SUSPENSION |
| AW | PER CUBIC FEET |
| AS | PER CUBIC FOOT |
| AT | PER CUBIC INCH |
| AX | PER CUBIC METER |
| BN | PER FLUID OUNCE |
| BP | PER FLUIDRAM |
| BK | PER GRAM |
| BS | PER LITER |
| CN | PER METERED SPRAY |
| BM | PER MICROGRAM |
| BL | PER MILLIGRAM |
| BY | PER MILLILITER |
| CG | PER MILLILITER OF RECONSTITUTED SOLUTION |
| CH | PER MILLILITER OF RECONSTITUTED SUSPENSION |
| CP | PER OUNCE |
| BU | PERCENT |
| CV | RELEASED PER 24 HOURS |
| CW | RELEASED PER HOUR |
| AN | VOLUME PER CUBIC CENTIMETER |
| AM | VOLUME PER GRAM |
| Table 3 |
| Reply Code (AG54) | Reply |
| B4508 | AMMONIUM |
| B4509 | POLYPHOSPHATES |
| B0937 | WATER |
ARAW*JMINIMUM FLASH POINT
THE MINIMUM DEGREES AT WHICH THE ITEM WILL IGNITE AND BURN.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARAWJAAE2.0*;ARAWJAAE2.0$$JAAE2.1*)
| Table 1 |
| Reply Code (AJ40) | Reply |
| AAD | DEG CELSIUS |
| AAE | DEG FAHRENHEIT |
AQGP*JAPPROXIMATE SHELF LIFE
THE APPROXIMATE SHELF LIFE /STORAGE TIME/ OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQGPJYR2.0*)
| Table 1 |
| Reply Code (AH68) | Reply |
| DY | DAYS |
| HR | HOURS |
| MN | MINUTES |
| MH | MONTHS |
| NS | NANOSECONDS |
| SC | SECONDS |
| YR | YEARS |
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information