An item which simulates the physical characteristics of a rocket guidance and control section. Used to train personnel in assembly, handling, and checkout procedures of guided rockets.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED80726*)
Reply to this MRC in accordance with Volume 3.
AGAVGEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLC2.0*;ABHPJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJLA2.0*;ABKWJLA2.0$$JLA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJLC2.0*;ABMKJLC2.0$$JLC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
AMWN*AMODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AMWNAJ4)
CTHR*JPACKAGE NOMINAL OVERALL HEIGHT AND TYPE
THE NOMINAL DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP,AND THE TYPE OF PACKAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTHRJADQ2.0*;CTHRJADQ2.0$$JADQ2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AD28) | Reply |
| CU | 1 HANDLE AT EACH END |
| DX | 1 HANDLE AT EACH SIDE |
| CW | 1 WEBBING LOOP EACH SIDE |
| CX | 1 WEBBING LOOP ON 4 CORNERS |
| DW | 2 HANDLES AT EACH END |
| CZ | 3 OBLONG METAL RINGS EITHER SIDE |
| CY | 3 WEBBING LOOPS EITHER SIDE |
| AV | AUTOMATIC DATA PROCESSING SERVER |
| CD | BAIL |
| CR | BAR |
| BW | BECKET |
| AB | BELT ATTACHMENTS |
| CF | BELT STRAP |
| AY | BOLT ON EAR |
| CJ | BOW |
| DY | BOW HANDLE |
| AC | BRAKE TYPE CASTERS |
| AA | CAMERA |
| CE | CASTERS |
| CM | CONTROL HEAD ASSEMBLY |
| AW | CRADLE |
| AX | DAVIT |
| CG | DETACHABLE SHOULDER STRAP |
| BU | DISPLAY UNIT |
| DS | D-RING |
| DP | D-RING W/TAB |
| DE | FIXED CASTERS |
| AE | FIXED EXTERNAL HANDLES |
| DJ | FIXED KNOB |
| AZ | FIXED LIFTING EARS ON CRADLE |
| DK | FIXED LOOP |
| EA | FOLD OVER HANDLE |
| DZ | FOLDING |
| BA | GRIPS |
| BB | GRIPS, FINGERHOLE |
| DC | HAND PUSHED |
| AJ | HAND STRAP |
| CP | HANDHOLES |
| BY | HANDLE |
| BD | HANDLE ON END |
| BE | HANDLE ON SIDE |
| BF | HANDLE ON TOP |
| AL | HANDLE, ADJUSTABLE |
| BH | HANDLE, EACH END, FOLDING |
| BL | HANDLE, EACH END, RING |
| BJ | HANDLE, FRONT, FOLDING |
| AM | HANDLE, NONADJUSTABLE |
| BK | HANDLE, PULL, REMOVABLE |
| BG | HANDLES, FLUSH FOLDING |
| BC | HANDLES, METAL |
| AF | HINGED EXTERNAL HANDLES |
| DT | HOOK |
| EN | HYDRAULIC JACK |
| AN | KNOB |
| CB | L-HANDLE |
| CV | LIFTING CHAIN |
| BM | LIFTING EAR |
| AH | LIFTING EYES |
| BN | LIFTING FLANGE |
| BP | LIFTING LUGS |
| BX | LOOP |
| EH | LOW SLOPING TOP |
| DG | MANUAL |
| EM | MANUAL HAND JACK |
| CH | NECK STRAP |
| AD | NONBRAKE TYPE CASTERS |
| DV | OPEN CONTOURED HANDLE |
| DU | OPEN FINGER GRIP |
| AR | PALLET |
| EJ | PALLET DOMESTIC, US NAVY |
| EK | PALLET FLEET, US NAVY |
| ED | PALLET, US AIR FORCE |
| EE | PALLET, US ARMY |
| EF | PALLET, US MARINE CORPS |
| EG | PALLET, US NAVY |
| DN | PISTOL GRIP |
| DH | POWER |
| CA | PULL RING |
| AS | PULL RING/TAB |
| DA | PUSHED |
| AG | RECESSED HANDLES |
| DL | REMOVABLE LOOP |
| CS | RETRACTABLE HANDLES |
| CL | ROD |
| BZ | ROPE |
| DD | SELF-PROPELLED |
| EB | SHIPPING CONTAINER |
| AK | SHOULDER STRAP |
| CN | SIDE DROP HANDLES |
| AP | SKID |
| DQ | SLIDE LOCK KEEPER |
| DM | SLIDING LOOP |
| AT | SLING |
| BQ | SLING, ENDLESS |
| BR | SNAP CATCH |
| EL | SNAP FASTENER |
| DR | SNAP HOOK |
| CK | STAFF |
| AU | STEERING FLANGE |
| BS | STRAP |
| BT | STRAP, NYLON WEB |
| DF | SWIVEL CASTERS |
| BV | TERMINAL |
| CC | T-HANDLE |
| DB | TOWED |
| CT | TRACKS |
| EP | TRAILER |
| EC | W/HANDLES OR GRIPS |
| AQ | WHEELS |
CTJT*JPACKAGE NOMINAL OVERALL LENGTH AND TYPE
THE NOMINAL DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS,AND THE TYPE OF PACKAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTJTJADR2.0*;CTJTJADR2.0$$JADR2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AD28) | Reply |
| CU | 1 HANDLE AT EACH END |
| DX | 1 HANDLE AT EACH SIDE |
| CW | 1 WEBBING LOOP EACH SIDE |
| CX | 1 WEBBING LOOP ON 4 CORNERS |
| DW | 2 HANDLES AT EACH END |
| CZ | 3 OBLONG METAL RINGS EITHER SIDE |
| CY | 3 WEBBING LOOPS EITHER SIDE |
| AV | AUTOMATIC DATA PROCESSING SERVER |
| CD | BAIL |
| CR | BAR |
| BW | BECKET |
| AB | BELT ATTACHMENTS |
| CF | BELT STRAP |
| AY | BOLT ON EAR |
| CJ | BOW |
| DY | BOW HANDLE |
| AC | BRAKE TYPE CASTERS |
| AA | CAMERA |
| CE | CASTERS |
| CM | CONTROL HEAD ASSEMBLY |
| AW | CRADLE |
| AX | DAVIT |
| CG | DETACHABLE SHOULDER STRAP |
| BU | DISPLAY UNIT |
| DS | D-RING |
| DP | D-RING W/TAB |
| DE | FIXED CASTERS |
| AE | FIXED EXTERNAL HANDLES |
| DJ | FIXED KNOB |
| AZ | FIXED LIFTING EARS ON CRADLE |
| DK | FIXED LOOP |
| EA | FOLD OVER HANDLE |
| DZ | FOLDING |
| BA | GRIPS |
| BB | GRIPS, FINGERHOLE |
| DC | HAND PUSHED |
| AJ | HAND STRAP |
| CP | HANDHOLES |
| BY | HANDLE |
| BD | HANDLE ON END |
| BE | HANDLE ON SIDE |
| BF | HANDLE ON TOP |
| AL | HANDLE, ADJUSTABLE |
| BH | HANDLE, EACH END, FOLDING |
| BL | HANDLE, EACH END, RING |
| BJ | HANDLE, FRONT, FOLDING |
| AM | HANDLE, NONADJUSTABLE |
| BK | HANDLE, PULL, REMOVABLE |
| BG | HANDLES, FLUSH FOLDING |
| BC | HANDLES, METAL |
| AF | HINGED EXTERNAL HANDLES |
| DT | HOOK |
| EN | HYDRAULIC JACK |
| AN | KNOB |
| CB | L-HANDLE |
| CV | LIFTING CHAIN |
| BM | LIFTING EAR |
| AH | LIFTING EYES |
| BN | LIFTING FLANGE |
| BP | LIFTING LUGS |
| BX | LOOP |
| EH | LOW SLOPING TOP |
| DG | MANUAL |
| EM | MANUAL HAND JACK |
| CH | NECK STRAP |
| AD | NONBRAKE TYPE CASTERS |
| DV | OPEN CONTOURED HANDLE |
| DU | OPEN FINGER GRIP |
| AR | PALLET |
| EJ | PALLET DOMESTIC, US NAVY |
| EK | PALLET FLEET, US NAVY |
| ED | PALLET, US AIR FORCE |
| EE | PALLET, US ARMY |
| EF | PALLET, US MARINE CORPS |
| EG | PALLET, US NAVY |
| DN | PISTOL GRIP |
| DH | POWER |
| CA | PULL RING |
| AS | PULL RING/TAB |
| DA | PUSHED |
| AG | RECESSED HANDLES |
| DL | REMOVABLE LOOP |
| CS | RETRACTABLE HANDLES |
| CL | ROD |
| BZ | ROPE |
| DD | SELF-PROPELLED |
| EB | SHIPPING CONTAINER |
| AK | SHOULDER STRAP |
| CN | SIDE DROP HANDLES |
| AP | SKID |
| DQ | SLIDE LOCK KEEPER |
| DM | SLIDING LOOP |
| AT | SLING |
| BQ | SLING, ENDLESS |
| BR | SNAP CATCH |
| EL | SNAP FASTENER |
| DR | SNAP HOOK |
| CK | STAFF |
| AU | STEERING FLANGE |
| BS | STRAP |
| BT | STRAP, NYLON WEB |
| DF | SWIVEL CASTERS |
| BV | TERMINAL |
| CC | T-HANDLE |
| DB | TOWED |
| CT | TRACKS |
| EP | TRAILER |
| EC | W/HANDLES OR GRIPS |
| AQ | WHEELS |
CTKG*JPACKAGE NOMINAL OVERALL WIDTH AND TYPE
THE NOMINAL OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE PACKAGE,IN DISTINCTION FROM THICKNESS,AND THE TYPE OF PACKAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTKGJLDF2.0*;CTKGJLDF2.0$$JLDF2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AD28) | Reply |
| CU | 1 HANDLE AT EACH END |
| DX | 1 HANDLE AT EACH SIDE |
| CW | 1 WEBBING LOOP EACH SIDE |
| CX | 1 WEBBING LOOP ON 4 CORNERS |
| DW | 2 HANDLES AT EACH END |
| CZ | 3 OBLONG METAL RINGS EITHER SIDE |
| CY | 3 WEBBING LOOPS EITHER SIDE |
| AV | AUTOMATIC DATA PROCESSING SERVER |
| CD | BAIL |
| CR | BAR |
| BW | BECKET |
| AB | BELT ATTACHMENTS |
| CF | BELT STRAP |
| AY | BOLT ON EAR |
| CJ | BOW |
| DY | BOW HANDLE |
| AC | BRAKE TYPE CASTERS |
| AA | CAMERA |
| CE | CASTERS |
| CM | CONTROL HEAD ASSEMBLY |
| AW | CRADLE |
| AX | DAVIT |
| CG | DETACHABLE SHOULDER STRAP |
| BU | DISPLAY UNIT |
| DS | D-RING |
| DP | D-RING W/TAB |
| DE | FIXED CASTERS |
| AE | FIXED EXTERNAL HANDLES |
| DJ | FIXED KNOB |
| AZ | FIXED LIFTING EARS ON CRADLE |
| DK | FIXED LOOP |
| EA | FOLD OVER HANDLE |
| DZ | FOLDING |
| BA | GRIPS |
| BB | GRIPS, FINGERHOLE |
| DC | HAND PUSHED |
| AJ | HAND STRAP |
| CP | HANDHOLES |
| BY | HANDLE |
| BD | HANDLE ON END |
| BE | HANDLE ON SIDE |
| BF | HANDLE ON TOP |
| AL | HANDLE, ADJUSTABLE |
| BH | HANDLE, EACH END, FOLDING |
| BL | HANDLE, EACH END, RING |
| BJ | HANDLE, FRONT, FOLDING |
| AM | HANDLE, NONADJUSTABLE |
| BK | HANDLE, PULL, REMOVABLE |
| BG | HANDLES, FLUSH FOLDING |
| BC | HANDLES, METAL |
| AF | HINGED EXTERNAL HANDLES |
| DT | HOOK |
| EN | HYDRAULIC JACK |
| AN | KNOB |
| CB | L-HANDLE |
| CV | LIFTING CHAIN |
| BM | LIFTING EAR |
| AH | LIFTING EYES |
| BN | LIFTING FLANGE |
| BP | LIFTING LUGS |
| BX | LOOP |
| EH | LOW SLOPING TOP |
| DG | MANUAL |
| EM | MANUAL HAND JACK |
| CH | NECK STRAP |
| AD | NONBRAKE TYPE CASTERS |
| DV | OPEN CONTOURED HANDLE |
| DU | OPEN FINGER GRIP |
| AR | PALLET |
| EJ | PALLET DOMESTIC, US NAVY |
| EK | PALLET FLEET, US NAVY |
| ED | PALLET, US AIR FORCE |
| EE | PALLET, US ARMY |
| EF | PALLET, US MARINE CORPS |
| EG | PALLET, US NAVY |
| DN | PISTOL GRIP |
| DH | POWER |
| CA | PULL RING |
| AS | PULL RING/TAB |
| DA | PUSHED |
| AG | RECESSED HANDLES |
| DL | REMOVABLE LOOP |
| CS | RETRACTABLE HANDLES |
| CL | ROD |
| BZ | ROPE |
| DD | SELF-PROPELLED |
| EB | SHIPPING CONTAINER |
| AK | SHOULDER STRAP |
| CN | SIDE DROP HANDLES |
| AP | SKID |
| DQ | SLIDE LOCK KEEPER |
| DM | SLIDING LOOP |
| AT | SLING |
| BQ | SLING, ENDLESS |
| BR | SNAP CATCH |
| EL | SNAP FASTENER |
| DR | SNAP HOOK |
| CK | STAFF |
| AU | STEERING FLANGE |
| BS | STRAP |
| BT | STRAP, NYLON WEB |
| DF | SWIVEL CASTERS |
| BV | TERMINAL |
| CC | T-HANDLE |
| DB | TOWED |
| CT | TRACKS |
| EP | TRAILER |
| EC | W/HANDLES OR GRIPS |
| AQ | WHEELS |
DDAC*ADOD AMMUNITION CODE
A NINE /9/ CHARACTER SEMISIGNIFICANT NUMBER DIVIDED INTO TWO PARTS BY A HYPHEN CENTRALLY ASSIGNED TO GENERIC DESCRIPTIONS APPLICABLE TO ITEMS OF SUPPLY IN FSG 13 AND 14.
Enter the applicable code.
(DDACA1340-H725*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information