A medical device consisting of a catheter connected to an implantable small chamber, placed directly under the skin and allowing the injection of drugs and/or fluids.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED80003*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDSTA000*;MATTDTTB000$DSLA000*;MATTDTTB000$$DSLA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| NLA000 | NICKEL |
| PCA000 | PLASTIC |
| PTB000 | PLATINUM ALLOY |
| SLA000 | SILICON ALLOY |
| STA000 | STEEL |
| ST1052 | STEEL COMP 1052 |
| STB000 | STEEL CORROSION RESISTING |
| STD000 | STEEL TOOL |
| TTC000 | TITANIA |
| TTB000 | TITANIUM |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAA2.0*;ABRYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJCC2.0*;ABHPJCC2.0$$JCC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJCC2.0*;AARXJCC2.0$$JCC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJCA2.0*;ABKVJCA2.0$$JCA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ANGDDDISPOSITION AFTER INITIAL USE
AN INDICATION OF THE DISPOSITION OF AN ITEM AFTER INITIAL USE.
Enter the applicable reply code from the table below
(ANGDDAB)
| Table 1 |
| Reply Code (AJ61) | Reply |
| AC | DISPOSABLE |
| AB | REUSABLE |
ANFG*DTIP TYPE
INDICATES THE TYPE OF TIP PROVIDED.
Enter the applicable reply code from the table below
(ANFGDADN)
| Table 1 |
| Reply Code (AJ55) | Reply |
| ACW | CONICAL |
| AAD | COUDE |
| AFK | CURVED |
| AGW | DIAMOND |
| ADA | FLAT |
| AEK | FLEXIBLE |
| ADC | GLOBULAR |
| AGY | HARD |
| ADF | LUER LOCK |
| ADG | LUER SLIP |
| ADH | MALLEABLE |
| AGZ | MEDIUM |
| AAK | OPEN END |
| ADM | OPEN SIDE |
| ADN | OPEN TOP |
| ABL | PERFORATED |
| ACN | PLAIN |
| ADP | PREFORMED |
| AAP | ROUND |
| AHF | SCREW |
| ABC | STRAIGHT |
| AEA | TAPERED |
| AAN | THREADED |
ANFJ*DCONNECTOR TYPE
INDICATES THE TYPE OF CONNECTOR PROVIDED.
Enter the applicable reply code from the table below
(ANFJDAKS)
| Table 1 |
| Reply Code (AJ57) | Reply |
| AKP | BEVELED INTEGRAL CONNECTOR |
| AAV | CONE-SHAPED |
| AKR | EPOXY SEALED HUB |
| AJS | FEMALE LUER LOCK |
| ANV | FEMALE LUER SLIP |
| AKQ | FEMALE LUER-HUB |
| ANT | FEMALE TO MALE LUER LOCK |
| AAB | FINGER VALVE |
| AKS | FLEXIBLE |
| AKT | LUER END |
| AJW | LUER LOCK |
| AAC | LUER LOCK HUB |
| AJY | LUER SLIP HUB |
| AKA | MALE LUER LOCK |
| ANU | MALE TO MALE LUER LOCK |
| AAD | SLIP HUB |
| AKW | TAPERED |
| AKX | TAPERED FORCE-FIT |
| AFC | UNIVERSAL |
| AAE | Y-CONNECTOR |
AGUC*AUNIT PACKAGE QUANTITY
THE NUMBER OF ITEMS CONTAINED IN THE UNIT PACKAGE.
Enter the numeric reply with a minimum of one digit.
(AGUCA10*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDAHJ)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| AKB | ACCELERATED AGING RESISTANT |
| ABU | ACCELERATED LIGHT |
| ABV | ACCELERATED OXYGEN |
| AEE | ACID PROOF |
| ABY | ACID RESISTANT |
| AAQ | ADHESIVE RESISTANT |
| AEQ | AGE RESISTANT |
| ADC | AIRTIGHT |
| ABZ | ALCOHOL RESISTANT |
| ACK | ALKALI RESISTANT |
| ADT | ALKYLATE FUEL RESISTANT |
| ACU | ALTITUDE |
| DNV | AMMONIA RESISTANT |
| AHF | ANTIFOULING |
| AJV | ANTIMICROBIAL |
| AFY | ANTINEOPLASTIC DRUG |
| AFH | ANTISTATIC TREATMENT |
| AJR | AROMATIC FUEL RESISTANT |
| ACA | AROMATIC HYDROCARBON FLUID RESISTANT |
| AHE | BIOLOGICAL AGENTS RESISTANT |
| ADU | CARBON TETRACHLORIDE |
| AAB | CHEMICAL RESISTANT |
| AES | CHILL |
| ACV | CLEANING RESISTANT |
| ACB | COLD RESISTANT |
| AHY | CONTROLLED ROOM TEMPERATURE |
| AEH | COOLANT |
| AGB | CORONA RESISTANT |
| AJH | CORROSION |
| ACY | CORROSION PROOF |
| AAC | CORROSION RESISTANT |
| AFT | CORROSIVE |
| DNT | CRACK |
| AJL | CRAZE |
| ADM | CRUSH RESISTANT |
| ADV | CYCLIC EXPOSURE |
| AER | DIRT RESISTANT |
| DNF | DO NOT FREEZE |
| DNR | DO NOT REFRIGERATE |
| DNS | DO NOT STORE AT OR ABOVE 40 DEG C |
| ADG | DRIP TIGHT |
| AAD | DRIPPROOF |
| AGZ | DURATION |
| AAF | DUST RESISTANT |
| ACZ | DUST TIGHT |
| AAE | DUSTPROOF |
| AHP | ELECTRIC ARCING |
| AFJ | ELECTRICALLY INSULATED |
| AAA | ELECTRICALLY INSULATED UP TO 1000 VOLTS |
| AFC | ELECTROMAGNETICALLY SHIELDED |
| ADW | ENGINE OIL RESISTANT |
| ADA | EROSION PROOF |
| AHZ | ESTER RESISTANT |
| AJA | ETHYLENE GLYCOL RESISTANT |
| AHR | ETHYLENE OXIDE GAS |
| AFX | EXPIRATION DATED |
| AAG | EXPLOSION PROOF |
| AEU | FADE |
| AAJ | FIRE RESISTANT |
| AGC | FIRE RETARDANT |
| AAH | FIREPROOF |
| ACL | FLAME RESISTANT |
| AEG | FLAME RETARDANT |
| AFG | FLAMEPROOF |
| AGR | FLAMMABLE |
| AJN | FLEX RESISTANT |
| AAU | FLUID RESISTANT |
| AFR | FRAY RESISTANT |
| ADR | FRAYPROOF |
| AET | FREEZE |
| AJU | FREEZE RESISTANT |
| AGS | FROZEN FOR PRESERVATION |
| AAK | FUEL PROOF |
| AAL | FUEL RESISTANT |
| AEJ | FUEL, AROMATIC |
| AHD | FUMES RESISTANT |
| AAM | FUNGUS PROOF |
| AAN | FUNGUS RESISTANT |
| AJK | GASOLINE |
| AAS | GASOLINE RESISTANT |
| ADH | GENERAL PURPOSE |
| ACQ | GREASE RESISTANT |
| AEK | HEAT |
| AJG | HEAT AGING |
| AGD | HEAT DRY |
| AAP | HEAT RESISTANT |
| ADB | HERMETIC |
| AFK | HERMETICALLY SEALED |
| AGE | HIGH TEMPERATURE |
| AFE | HIGH WIND RESISTANT |
| AEX | HUMIDITY CONTROLLED |
| ABP | HUMIDITY PROOF |
| AAR | HUMIDITY RESISTANT |
| AEL | HYDRAULIC FLUID |
| ADS | HYDRAULIC SOLUTION RESISTANT |
| AGP | HYDROCARBON |
| AAV | HYDROCARBON FUEL |
| AHG | HYDROSTATIC RESISTANT |
| AEP | ICE RESISTANT |
| AFF | ICEPROOF |
| AJB | INCOMBUSTIBLE |
| ADJ | INDUSTRIAL USE |
| AKC | INHERENTLY REPELLENT |
| ADN | JET FUEL RESISTANT |
| ACR | KETONE RESISTANT |
| AHS | LACQUER SOLVENT RESISTANT |
| AGL | LATEX IMPREGNATED |
| AEM | LIGHT RESISTANT |
| AHT | LIQUID OXYGEN |
| DNW | LIQUID SULPHUR MUSTARD RESISTANT |
| YP | LIQUID SULPHUR MUSTARD RESISTANT |
| AGF | LOW TEMPERATURE |
| ADX | LUBRICATING OIL RESISTANT |
| AFL | MAGNETIC SHIELD |
| AEC | MAR RESISTANT |
| AHA | MARINE GROWTH RESISTANT |
| AGY | MEDIUM TEMPERATURE |
| ADY | MILDEW PROOF |
| AKD | MILDEW PROOFED |
| ACC | MILDEW RESISTANT |
| AEV | MINERAL RESISTANT |
| AAT | MOISTURE PROOF |
| AAW | MOISTURE RESISTANT |
| AJX | MOISTURE VAPOR PERMEABLE |
| AGA | MOLD RESISTANT |
| ADP | MOTH RESISTANT |
| ACD | MOTHPROOF |
| AHW | MUST BE FROZEN |
| AEY | NONFLAMMABLE |
| AGQ | NONMAGNETIC |
| AHU | NONPHENOLIC GREASE SOLVENT |
| AKE | NONTOXIC |
| AFM | NUCLEAR HARDENED |
| AAX | OIL RESISTANT |
| AAY | OIL TIGHT |
| AGM | OIL TREATED |
| ADE | ORGANIC SOLVENT RESISTANT |
| AJC | OXIDATION RESISTANT |
| AGT | OXIDIZING |
| AJS | OXYGEN RESISTANT |
| ACN | OZONE RESISTANT |
| AJD | PAINT RESISTANT |
| ACS | PERSPIRATION RESISTANT |
| AJJ | PETROLEUM |
| ACP | PETROLEUM RESISTANT |
| AFW | PILFERABLE |
| AFU | POISONOUS |
| AFV | PRECIOUS METAL |
| AGN | PRESERVATIVE OIL |
| AAZ | PRESSURE PROOF |
| AFN | PRESSURIZED |
| PFS | PROTECT FROM DIRECT SUNLIGHT |
| PFL | PROTECT FROM LIGHT |
| AFZ | PUNCTURE RESISTANT |
| AED | RADIATION RESISTANT |
| ADK | RAIN TIGHT |
| AHX | REQUIRES CONTROLLED ROOM TEMPERATURE STORAGE BETWEEN 15 TO 30 DEG CELSIUS |
| AGU | REQUIRES REFRIGERATION BETWEEN 2 DEG TO 8 DEG C |
| AHQ | REQUIRES REFRIGERATION STORAGE BETWEEN 2 TO 8 DEG CELSIUS |
| AKF | RESIN |
| AKG | RESIN IMPREGNATED |
| AGG | RODENT RESISTANT |
| AFQ | RUST RESISTANT |
| AFP | RUSTPROOF |
| ACT | SALINE RESISTANT |
| AEZ | SALT AIR RESISTANT |
| ADL | SALT SPRAY PROOF |
| ABQ | SALT SPRAY RESISTANT |
| AGJ | SALT WATER PROOF |
| ABA | SALT WATER RESISTANT |
| ABB | SAND PROOF |
| ABC | SAND RESISTANT |
| AHJ | SCRATCH PROOF |
| AFS | SCRUB RESISTANT |
| AHB | SEAWEED RESISTANT |
| AFA | SECURITY |
| AGV | SECURITY STORAGE |
| AJP | SHOCK |
| ABD | SHOCK PROOF |
| ABE | SHOCK RESISTANT |
| ADQ | SHRINK RESISTANT |
| AGK | SLIP RESISTANT |
| AJM | SMOG RESISTANT |
| AHV | SMUDGEPROOF |
| ACE | SOIL RESISTANT |
| ABF | SOLVENT RESISTANT |
| ABR | SPLASH PROOF |
| ABS | SPRAY PROOF |
| ABT | SPRAY TIGHT |
| AJQ | STAIN |
| AEF | STAIN RESISTANT |
| AJW | STATIC DISSIPATIVE |
| ADF | STATIC FREE |
| AJE | STEAM |
| ACW | STEAM RESISTANT |
| AGW | SUBJECT TO DAMAGE BY FREEZING |
| AHK | SUBJECT TO DETERIORATION |
| ABW | SUBMERSIBLE |
| AEA | SUN RESISTANT |
| AEB | SUNLIGHT RESISTANT |
| AKH | SYNTHETIC IMPREGNATED |
| AHM | SYNTHETIC OIL RESISTANT |
| AHH | TAMPER PROOF |
| AJF | TEAR |
| AEN | TEAR RESISTANT |
| AHN | TEMPERATURE RESISTANT |
| ACX | TETRAETHYL LEAD RESISTANT |
| ABG | THERMAL SHOCK RESISTANT |
| ACF | TOXICOLOGICAL AGENTS RESISTANT |
| AHL | ULTRAVIOLET LIGHT RESISTANT |
| AKJ | ULTRAVIOLET RESISTANT |
| AFD | VAPORTIGHT |
| AGX | VAULT STORAGE |
| AFB | VENTILATED |
| ADZ | VERMIN PROOF |
| ACG | VESICANT GAS RESISTANT |
| AHC | VIBRATION |
| ABH | VIBRATION PROOF |
| ABJ | VIBRATION RESISTANT |
| AJT | WARP/TWIST |
| ACH | WATER REPELLENT |
| ACM | WATER RESISTANT |
| ABK | WATERPROOF |
| ABL | WATERTIGHT |
| DNU | WEAR RESISTANT |
| ABN | WEATHER RESISTANT |
| ABM | WEATHERPROOF |
| ADD | WINDPROOF |
| ACJ | WRINKLE RESISTANT |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
SHPE*DSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDAND)
| Table 1 |
| Reply Code (AD07) | Reply |
| ALC | OVAL |
| AND | RECTANGULAR |
| APL | ROUND |
CDXQ*DOUTLET PORT TYPE
INDICATES THE TYPE OF OUTLET PORT PROVIDED.
Enter the applicable reply code from the table below
(CDXQDBN)
| Table 1 |
| Reply Code (AH98) | Reply |
| BP | DOUBLE LUMEN |
| BN | SINGLE LUMEN |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information