FSC Information

1305	Ammunition, through 30mm

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

MRC PDNB has been added

MRC ZZZP has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED68940*)

AHUFDCARTRIDGE DESIGN TYPE

INDICATES THE DESIGN TYPE CHARACTERISTIC OF THE CARTRIDGE.

Enter the applicable reply code from the table below

(AHUFDACM*;AHUFDADK$DACP*;AHUFDADK$$DACP*)

Table 1
	Reply Code (AF43)	Reply
	AAB	ANTIAIRCRAFT
	AAC	ANTIAIRCRAFT-COMMON
	AAD	ANTIPERSONNEL
	AAE	ANTIPERSONNEL-TRACER
	AAF	ARMOR PIERCING
	AAG	ARMOR PIERCING CAPPED
	AAH	ARMOR PIERCING CAPPED-TRACER
	ADT	ARMOR PIERCING CONE STABILIZED DISCARDING SABOT-TRACER
	ADU	ARMOR PIERCING DISCARDING SABOT, FRANGIBLE
	ADP	ARMOR PIERCING FIN STABILIZED DISCARDING SABOT-TRACER
	AAJ	ARMOR PIERCING-INCENDIARY
	AAK	ARMOR PIERCING-INCENDIARY-TRACER
	AAL	ARMOR PIERCING-TRACER
	AAM	BALL
	ACL	BALL, CASELESS
	AAN	BALL, DUPLEX
	AAP	BALL, FRANGIBLE
	AAS	BALL, OVERHEAD FIRE
	ACM	BALL, PARABELLUM
	ADV	BIRD SCARING
	ACR	BLIND LOADED
	AAU	BLIND LOADED AND PLUGGED
	AAV	BLIND LOADED AND TRACER
	AAW	BUCKSHOT
	ACK	CHAFF
	AAX	FLECHETTE
	AAY	FUZE CAVITY LINED
	ACS	FUZE CAVITY LINED PROXIMITY
	AAZ	FUZE CAVITY LINED-NONFRAGMENTATION
	ABA	HIGH CAPACITY
	ABB	HIGH EXPLOSIVE
	ABC	HIGH EXPLOSIVE ANTITANK
	ABD	HIGH EXPLOSIVE ANTITANK-TRACER
	ADN	HIGH EXPLOSIVE ANTITANK-TRACER-MULTIPURPOSE
	ABE	HIGH EXPLOSIVE INCENDIARY
	ACT	HIGH EXPLOSIVE INCENDIARY, BELT DESTRUCTION
	ACW	HIGH EXPLOSIVE INCENDIARY, PLUGGED
	ACX	HIGH EXPLOSIVE INCENDIARY, SELF DESTRUCTIVE
	ABF	HIGH EXPLOSIVE INCENDIARY-TRACER
	ACY	HIGH EXPLOSIVE INCENDIARY-TRACER, SELF DESTRUCTIVE
	ABG	HIGH EXPLOSIVE PLASTIC
	ABH	HIGH EXPLOSIVE PLASTIC-TRACER
	ADD	HIGH EXPLOSIVE SHELL DESTROYING-TRACER
	ABJ	HIGH EXPLOSIVE TRACER
	ACZ	HIGH EXPLOSIVE, PLUGGED
	ADA	HIGH EXPLOSIVE, SELF DESTRUCTIVE
	ADC	HIGH EXPLOSIVE-TRACER, DARK IGNITION
	ADB	HIGH EXPLOSIVE-TRACER, SELF DESTRUCTIVE
	ABK	HIGH PRESSURE TEST
	ABL	HYPERVELOCITY ARMOR PIERCING
	ABM	HYPERVELOCITY ARMOR PIERCING DISCORDING SABOT-TRACER
	ABN	HYPERVELOCITY ARMOR PIERCING-TRACER
	ADE	HYPERVELOCITY TARGET PRACTICE-TRACER
	ABP	ILLUMINATING
	ABQ	INCENDIARY
	ADF	INERT
	ACN	IRRITANT GAS
	ABR	LEAFLET
	ADG	LEAFLET, BASE EJECTION
	AAQ	LONG
	AAR	LONG RIFLE
	ADH	LOW PRESSURE TEST
	ACQ	MATCH
	ABS	NONPERSISTENT GAS
	ABT	PERSISTENT GAS
	ABU	PLAIN SLUG
	ADJ	PROXIMITY
	ADK	PROXIMITY NONFRAGMENTATION
	ABW	RIFLED SLUG
	AAT	SHORT
	ABX	SHOT
	ABY	SMOKE
	ABZ	SMOKE, BASE EJECTION
	ACA	SMOKE, BURSTER
	ACB	SPOTTER-TRACER
	ACP	TACTICAL CS
	ACC	TARGET PRACTICE
	ACD	TARGET PRACTICE-TRACER
	ACE	TRACER
	ACG	TRACER INCENDIARY
	ACH	TRACER W/DETERIORATED TRACER ELEMENT
	ACF	TRACER-HEADLIGHT
	ACJ	WAD CUTTER

AHUE*ACARTRIDGE MODEL NUMBER

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE CARTRIDGE.

Enter the alpha-numeric reply with a minimum of one character.

(AHUEAP5)

AMSXDPROJECTILE DESIGN TYPE

INDICATES THE DESIGN TYPE CHARACTERISTIC OF THE PROJECTILE.

Enter the applicable reply code from the table below

(AMSXDAAE*;AMSXDAAH$DAAD*)

Table 1
	Reply Code (AJ22)	Reply
	A	ANY ACCEPTABLE
	AAL	BALL
	AAB	FULL GUILDING METAL JACKETED BALL
	AAC	FULL STEEL JACKETED BALL
	AAK	HIGH PRESSURE TEST BALL
	AAD	HOLLOW POINT BALL
	AAE	JACKETED BALL
	AAF	LEAD BALL
	AAH	SOFT POINT METAL JACKETED BALL
	AAJ	WAD CUTTER BALL

AMSYJMUZZLE VELOCITY

THE VELOCITY OF AN ITEM AT THE MOMENT OF LEAVING THE MUZZLE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AMSYJAKA2.0*;AMSYJAKA2.0$$JAKA2.1*)

Table 1
	Reply Code (AG20)	Reply
	AK	FEET PER SECOND
	BF	METERS PER SECOND

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CZEF*JCARTRIDGE CASE LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF A CARTRIDGE CASE,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CZEFJL2.0*)

Table 1
	Reply Code (AF47)	Reply
	L	MILLIMETER

AHVQDWEAPON FOR WHICH DESIGNED

AN INDICATION OF THE WEAPON/S/ FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(AHVQDADE*;AHVQDAKR$DAEN*;AHVQDAKR$$DAEN*)

Table 1
	Reply Code (AF49)	Reply
	AAB	AIRCRAFT MACHINE GUN M2
	A	ANY ACCEPTABLE
	AAC	AUTOMATIC PISTOL
	AAD	AUTOMATIC PISTOL M1911
	AAE	AUTOMATIC PISTOL M1911A1
	AAF	AUTOMATIC RIFLE M1918
	AAG	AUTOMATIC RIFLE M1918A2
	AAH	CARBINE M1
	AAJ	CARBINE M1A1
	AAK	CARBINE M2
	AAL	CARBINE M3
	AAM	COLT REVOLVER
	AAN	CONVERTED RIFLE M1
	ABA	GUN M1916
	AAP	GUN M1A2
	AAQ	GUN M1A3
	AAS	GUN M23
	AAT	GUN M26
	AAR	GUN M2A1
	AAU	GUN M3
	AAW	GUN M32
	AAV	GUN M3A1
	AAX	GUN M5
	AAY	GUN M51
	AAZ	GUN M6
	AEP	GUN MK1
	ABB	GUN T156
	AEL	GUN, ANTI-AIRCRAFT 40 MM
	ANK	GUN, AUTOMATIC GAU-12
	AMM	GUN, AUTOMATIC GAU-8
	AFJ	GUN, AUTOMATIC M1A2
	AMX	GUN, CANNON L7A2/M68
	AMY	GUN, CANNON L7A3/M68
	AFK	GUN, CANNON M1
	AGM	GUN, CANNON M113
	AGN	GUN, CANNON M139
	AKQ	GUN, CANNON M162
	AFL	GUN, CANNON M1A1
	AFM	GUN, CANNON M1A2
	AFN	GUN, CANNON M1A3
	AFP	GUN, CANNON M2
	AFS	GUN, CANNON M24
	AFT	GUN, CANNON M24A1
	AFQ	GUN, CANNON M2A1
	AFR	GUN, CANNON M3
	AFW	GUN, CANNON M32
	AFX	GUN, CANNON M35
	AFY	GUN, CANNON M36
	AFZ	GUN, CANNON M39
	AGA	GUN, CANNON M39A2
	AMN	GUN, CANNON M39A3
	AGB	GUN, CANNON M41
	AGC	GUN, CANNON M46
	AGD	GUN, CANNON M48
	AGE	GUN, CANNON M54
	AGF	GUN, CANNON M58
	AGG	GUN, CANNON M59
	AGH	GUN, CANNON M61
	AMP	GUN, CANNON M61A1
	AGJ	GUN, CANNON M66
	AGK	GUN, CANNON M68
	AMQ	GUN, CANNON M693
	AGL	GUN, CANNON M81
	AGP	GUN, CANNON MK1
	AGQ	GUN, CANNON T154
	AGR	GUN, CANNON T212
	AGS	GUN, CANNON XM135
	AGT	GUN, CANNON XM140
	AGW	GUN, CANNON XM168
	ABC	GUN, HAND RAMMED MK21 AND MODS
	ABD	GUN, HAND RAMMED MK22 MODS 0 THRU 3
	ABE	GUN, POWER RAMMED MK22 MODS 4 THRU 9
	ABF	GUN, POWER RAMMED MK27
	AKR	GUN-LAUNCHER M81
	AGX	HOWITZER, CANNON M1
	AHH	HOWITZER, CANNON M103
	AHJ	HOWITZER, CANNON M126
	AHK	HOWITZER, CANNON M137
	AMR	HOWITZER, CANNON M185
	AMT	HOWITZER, CANNON M1950
	AMS	HOWITZER, CANNON M199
	AGY	HOWITZER, CANNON M1A1
	AGZ	HOWITZER, CANNON M2
	AHA	HOWITZER, CANNON M2A1
	AHB	HOWITZER, CANNON M2A2
	AHC	HOWITZER, CANNON M4
	AHE	HOWITZER, CANNON M45
	AHF	HOWITZER, CANNON M47
	AHG	HOWITZER, CANNON M49
	AHD	HOWITZER, CANNON M4A1
	ABJ	KRAG RIFLE M1898
	AEN	LAUNCHER, GRENADE M79
	AEM	LAUNCHER, HELICOPTER M75
	ABK	LYLE LINE THROWING GUN
	ABL	LYLE LINE THROWING GUN MK1 MOD 1
	ABM	MACHINE GUN
	ABN	MACHINE GUN AN-M2
	ABP	MACHINE GUN AN-M3
	ABY	MACHINE GUN M1916A6
	ABZ	MACHINE GUN M1917A1
	ACA	MACHINE GUN M1917A2
	ACB	MACHINE GUN M1917A4
	ACC	MACHINE GUN M1917A5
	ACD	MACHINE GUN M1917A6
	ACE	MACHINE GUN M1918
	ACF	MACHINE GUN M1918A2
	ACG	MACHINE GUN M1919
	ACH	MACHINE GUN M1919A4
	ACJ	MACHINE GUN M1919A5
	ACK	MACHINE GUN M1919A6
	ANL	MACHINE GUN M197
	ABQ	MACHINE GUN M2
	ABR	MACHINE GUN M2A1
	ABS	MACHINE GUN M3
	ABT	MACHINE GUN M37
	ABU	MACHINE GUN M60
	ABV	MACHINE GUN M63
	ABW	MACHINE GUN M73
	ABX	MACHINE GUN M85
	ACL	MACHINE GUN T52
	ACM	MACHINE GUN XM134
	AEQ	MATCH
	ACN	MINNI GUN M134
	AMU	MORTAR M081-61
	ACP	MORTAR M19
	ACQ	MORTAR M2
	ACR	MORTAR M30
	ACS	MORTAR T18E6
	AHL	MORTAR, CANNON M1
	AHN	MORTAR, CANNON M19
	AHM	MORTAR, CANNON M2
	AHP	MORTAR, CANNON M29
	AHQ	MORTAR, CANNON M30
	AHR	MORTAR, CANNON MK2
	AHS	MORTAR, CANNON MK4
	ACT	PISTOL
	AHT	RECOILLESS RIFLE M18
	AHW	RECOILLESS RIFLE M18A1
	AMV	RECOILLESS RIFLE M2 CARL GUSTAV
	AHX	RECOILLESS RIFLE M20
	AHY	RECOILLESS RIFLE M27
	AHZ	RECOILLESS RIFLE M27A1
	AJA	RECOILLESS RIFLE M40A1
	AJB	RECOILLESS RIFLE M40A1C
	AJC	RECOILLESS RIFLE M67
	AJD	RECOILLESS RIFLE T15E16
	AJE	RECOILLESS RIFLE T21E12
	ACU	REVOLVER
	ACV	REVOLVER M1917
	AMW	REVOLVER NO2
	ACW	RIFLE
	ACX	RIFLE M1
	ACY	RIFLE M14
	ACZ	RIFLE M16
	ADA	RIFLE M16E1
	ADD	RIFLE M1903
	ADE	RIFLE M1903A
	ADF	RIFLE M1903A1
	ADG	RIFLE M1903A3
	ADH	RIFLE M1903A4
	ADJ	RIFLE M1917
	ADB	RIFLE M2
	ADC	RIFLE M23
	ADK	RIFLE T44
	ADL	RIFLE T48
	ADM	RIFLE XM16B1
	ADY	S AND W REVOLVER
	ADP	SALUTING GUN 40 MM
	ADQ	SEMIAUTOMATIC PISTOL M1911
	ADN	SPOTTING RIFLE M8
	ADR	SUBCALIBER RIFLE M1903A2
	ADS	SUBMACHINE GUN
	ADT	SUBMACHINE GUN M1
	ADX	SUBMACHINE GUN M1928A1
	ADU	SUBMACHINE GUN M1A1
	ADV	SUBMACHINE GUN M3
	ADW	SUBMACHINE GUN M3A1

DDACADOD AMMUNITION CODE

A NINE /9/ CHARACTER SEMISIGNIFICANT NUMBER DIVIDED INTO TWO PARTS BY A HYPHEN CENTRALLY ASSIGNED TO GENERIC DESCRIPTIONS APPLICABLE TO ITEMS OF SUPPLY IN FSG 13 AND 14.

Enter the applicable code.

(DDACA1340-H725*)

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDFZE)

Table 1
	Reply Code (AN47)	Reply
	FZE	TRACER ELEMENT

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

AQGP*JAPPROXIMATE SHELF LIFE

THE APPROXIMATE SHELF LIFE /STORAGE TIME/ OF THE ITEM.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AQGPJYR2.0*)

Table 1
	Reply Code (AH68)	Reply
	MH	MONTHS
	YR	YEARS

AFJQ*JSTORAGE TEMP RANGE

THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.

(AFJQJCM32.0/P50.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

GRWT*JGROSS WEIGHT

THE COMBINED WEIGHT OF THE ITEM AND ITS LOADED CONTENTS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(GRWTJEBAJ2.0*;GRWTJEBAJ2.0$$JEBAJ2.1*)

Table 1
	Reply Code (AD28)	Reply
	AR	PALLET
	EJ	PALLET DOMESTIC, US NAVY
	EK	PALLET FLEET, US NAVY
	ED	PALLET, US AIR FORCE
	EE	PALLET, US ARMY
	EF	PALLET, US MARINE CORPS
	EB	SHIPPING CONTAINER

Table 2
	Reply Code (AG67)	Reply
	AJ	KILOGRAMS
	AS	POUNDS

CZKA*JPACKAGE REFERENCE NUMBER

AN ALPHA-NUMERIC CODE IDENTIFYING THE DRAWING AND/OR SPECIFICATION WHICH CONTROLS THE LOADING OF THE PACKAGE.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(CZKAJAR2.0*;CZKAJAR2.0$$JAR2.1*)

Table 1
	Reply Code (AF94)	Reply
	AA	AUSTRALIAN ARMY
	AR	ROYAL AUSTRALIAN AIR FORCE
	AU	ROYAL AUSTRALIAN NAVY
	AB	US AIR FORCE
	AC	US ARMY
	AD	US MARINE CORPS
	AE	US NAVY

EXWT*JNET EXPLOSIVE WEIGHT

THE NET WEIGHT OF THE EXPLOSIVE CONTENT OF THE ITEM FOR TRANSPORTATION AND/OR STORAGE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(EXWTJBBRAJ2.0*;EXWTJBBRAJ2.0$$JBBRAJ2.1*)

Table 1
	Reply Code (AH21)	Reply
	BBQ	STORAGE
	BBR	TRANSPORTATION

Table 2
	Reply Code (AG67)	Reply
	AJ	KILOGRAMS
	AS	POUNDS

HMCC*JHAZARDOUS MATERIAL CLASSIFICATION CODE

AN ALPHA-NUMERIC CODE IDENTIFYING A GROUP OR CLASSIFICATION OF VARIOUS MATERIALS AS TO THEIR POTENTIAL TO CAUSE EXPLOSIONS,FIRES OR DAMAGE BY CHEMICAL ACTION.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(HMCCJAG2.0*;HMCCJAG2.0$$JAG2.1*)

Table 1
	Reply Code (AP66)	Reply
	AB	COAST GUARD CLASS
	AC	DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION
	AD	DEPARTMENT OF TRANSPORTATION CLASS
	AE	DEPARTMENT OF TRANSPORTATION EXEMPTION
	AF	FIREFIGHTING GROUP
	AG	HAZARD SYMBOL
	AH	INHABITED BUILDING DISTANCE
	AJ	LOADING-STOWAGE
	AK	STORAGE COMPATIBILITY GROUP