An item designed for in surgical repair or replacement of the shoulder or elbow. It is the part of the prosthesis that inserts into the end of the trimmed and prepared humerus.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED68778*)
ARJDDDESIGN FORM
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(ARJDDADZ)
| Table 1 |
| Reply Code (AL52) | Reply |
| ADS | ANGULAR SHAPED |
| ADX | CURVED |
| ADY | CURVED LEFT |
| ADZ | CURVED RIGHT |
| AAB | FLAT |
| ADW | NOT CURVED |
| AEH | ONE-PIECE |
| AAK | STRAIGHT |
BPJZDUSAGE LOCATION
INDICATES THE LOCATION AT WHICH THE ITEM IS TO BE USED.
Enter the applicable reply code from the table below
(BPJZDALV*;BPJZDAJV$DAMU*;BPJZDAJV$$DAMU*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| AGU | EITHER ELBOW |
| AGV | EITHER SHOULDER |
| AJU | LEFT ELBOW |
| AJV | LEFT SHOULDER |
| ALV | RIGHT ELBOW |
| AMU | RIGHT SHOULDER |
SHPE*DSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDAZN)
| Table 1 |
| Reply Code (AD07) | Reply |
| BBH | 45 DEG BEND |
| BBF | 70 DEG BEND |
| BBG | 90 DEG BEND |
| AAE | ANGULAR |
| ABS | CIRCULAR |
| ACY | CURVED |
| AZN | CURVED DOWN |
| AZP | CURVED LEFT |
| BLL | CURVED ON FLAT |
| AZQ | CURVED RIGHT |
| AZR | CURVED UP |
| ADB | CYLINDRICAL |
| AFC | FLAT |
| AZT | FULL CURVED |
| AHH | HEXAGON |
| BLJ | LIGHT CURVED |
| BAE | MEDIUM CURVED |
| AKT | OCTAGONAL |
| ALC | OVAL |
| AND | RECTANGULAR |
| APL | ROUND |
| ASL | SQUARE |
| ATG | STRAIGHT |
AFJF*DSPECIFIC USE
THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AFJFDMA*;AFJFDUN$$DWA*)
| Table 1 |
| Reply Code (AD34) | Reply |
| MA | ANTERIOR |
| AAC | ARM AND LEG SURGERY |
| WA | ARM AND SHOULDER IMMOBILIZATION |
| AFY | ARM IMMOBILIZATION |
| UN | CONTROLLED DEPTH INSERTION WITHOUT TISSUE DISTORTION OR BLADE FLEX |
| UV | INSERTION |
| MN | INTRODUCING |
| MP | INTRODUCING-REMOVING |
| NB | REMOVING |
AQNA*DGRIP TYPE
INDICATES THE TYPE OF GRIP ON THE ITEM.
Enter the applicable reply code from the table below
(AQNADACH)
| Table 1 |
| Reply Code (AL17) | Reply |
| ABN | CONCAVED |
| AAC | FINGER RING |
| ACJ | GOLD RING HANDLE |
| ABC | KNURLED |
| ABP | PISTOL |
| AAG | SERRATED |
| ACH | SMOOTH |
| ABM | THUMB-FOREFINGER |
| ACL | THUMB-LOOP |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUM*JOVERALL THICKNESS
AN OVERALL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUMJAC2.0*;ADUMJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALJP*DSIZE DESIGNATION
A DESIGNATION INDICATING THE SIZE BY WHICH THE ITEM IS COMMERCIALLY KNOWN AND/OR IDENTIFIED.
Enter the applicable reply code from the table below
(ALJPDCTF*;ALJPDBAW$DJXN*;ALJPDBAW$$DJXN*)
| Table 1 |
| Reply Code (AF81) | Reply |
| BGW | 0 |
| CTN | 00 |
| CTM | 000 |
| AAB | 1 |
| BFW | 1 MILLIMETER |
| KGC | 1 TO 4 |
| ABQ | 10 |
| KAX | 10 FRENCH |
| AYJ | 10 MILLIMETER |
| GTA | 10 TO 11 |
| JZQ | 100 MILLIMETER |
| ABZ | 11 |
| CTX | 11 MILLIMETER |
| GTC | 11 TO 12 |
| JHP | 110 MILLIMETER |
| ACG | 12 |
| JWT | 12 FRENCH |
| CTY | 12 MILLIMETER |
| EHC | 12 TO 13 |
| BZQ | 12AAAA |
| BZP | 12AAAAA |
| ACX | 13 |
| JXB | 13 INCH |
| CTZ | 13 MILLIMETER |
| JHH | 13 TO 14 |
| ADF | 14 |
| JWU | 14 FRENCH |
| CWA | 14 MILLIMETER |
| JHK | 14 TO 15 |
| JXC | 14 TO 20 INCH |
| EBR | 14.0 INCH |
| ADV | 15 |
| JXD | 15 INCH |
| AYK | 15 MILLIMETER |
| JHL | 15 TO 16 |
| AEB | 16 |
| JWV | 16 FRENCH |
| JXE | 16 INCH |
| BFA | 16 MILLIMETER |
| JHN | 16 TO 17 |
| AEQ | 17 |
| EGS | 17 MILLIMETER |
| AEX | 18 |
| JWW | 18 FRENCH |
| JMX | 18 MILLIMETER |
| EBS | 18.0 INCH |
| AFL | 19 |
| JXG | 19 INCH |
| AAC | 2 |
| KAT | 2 FRENCH |
| EGZ | 2 INCH |
| BFQ | 2 MILLIMETER |
| KAL | 2 TO 4 |
| KBJ | 2.83 |
| AWS | 20 |
| JWX | 20 FRENCH |
| AYL | 20 MILLIMETER |
| JWK | 20 TO 23 |
| AWT | 21 |
| JXJ | 21 INCH |
| JMY | 21.5 MILLIMETER |
| AFZ | 22 |
| JWY | 22 FRENCH |
| JXK | 22 INCH |
| JWL | 22 TO 28 |
| AWW | 23 |
| JXL | 23 INCH |
| AGL | 24 |
| JWZ | 24 FRENCH |
| JXM | 24 INCH |
| HNM | 24 TO 27 |
| HNN | 24 TO 29 |
| AWY | 25 |
| JXN | 25 INCH |
| JAX | 25 MILLIMETER |
| CST | 26 |
| KAY | 26 FRENCH |
| JXP | 26 INCH |
| BDM | 26 TO 28 |
| EDD | 27 |
| JXQ | 27 INCH |
| JBA | 27 MILLIMETER |
| AGY | 28 |
| KAZ | 28 FRENCH |
| JXR | 28 INCH |
| EXX | 28 TO 29 |
| ECM | 28 TO 30 |
| AHD | 29 |
| JXS | 29 INCH |
| JVE | 29 TO 30 |
| AAD | 3 |
| BBK | 3 INCH |
| CTP | 3 MILLIMETER |
| BVY | 3 TO 12 |
| JNX | 3 TO 6 |
| KAN | 3.61 |
| AHJ | 30 |
| KBA | 30 FRENCH |
| JXT | 30 INCH |
| JVF | 30 TO 31 |
| BDN | 30 TO 32 |
| JWM | 30 TO 35 |
| JWN | 30 TO 36 |
| BHP | 3-1/2AAAAA |
| AHV | 32 |
| KBB | 32 FRENCH |
| JXU | 32 INCH |
| BET | 32 MILLIMETER |
| JVG | 32 TO 33 |
| JTG | 32 TO 34 |
| AJC | 33 |
| FDN | 33 TO 34 |
| JTS | 33 TO 38 |
| AJP | 34 |
| KBC | 34 FRENCH |
| JXV | 34 INCH |
| BDP | 34 TO 36 |
| AKB | 35 |
| CWR | 35 MILLIMETER |
| FGZ | 35 TO 36 |
| JPB | 35 TO 38 |
| AKN | 36 |
| JXA | 36 FRENCH |
| JXW | 36 INCH |
| KAH | 36 TO 38 |
| JWP | 36 TO 41 |
| ALA | 37 |
| AYN | 37 MILLIMETER |
| FKD | 37 TO 38 |
| ECP | 37 TO 39 |
| ALQ | 38 |
| KBD | 38 FRENCH |
| JXX | 38 INCH |
| BDQ | 38 TO 40 |
| BWV | 38 TO 42 |
| CWQ | 38 TO 44 |
| BXU | 38 TO 47 |
| AMC | 39 |
| JTT | 39 TO 42 |
| BWU | 39 TO 47 |
| BHG | 3A |
| BHF | 3AA |
| BHE | 3AAA |
| AAE | 4 |
| KAU | 4 FRENCH |
| BFL | 4 MILLIMETER |
| CWP | 4 TO 10 |
| JHD | 4 TO 5 |
| EHH | 4 TO 6 |
| KAP | 4.31 |
| KAQ | 4.56 |
| AMR | 40 |
| JXY | 40 INCH |
| AYP | 40 MILLIMETER |
| ECQ | 40 TO 42 |
| ANF | 41 |
| HRY | 41 TO 42 |
| CNN | 41 TO 43 |
| ANV | 42 |
| JXZ | 42 INCH |
| JTX | 42 MILLIMETER |
| BDR | 42 TO 44 |
| BYV | 42 TO 46 |
| JWR | 42 TO 47 |
| APJ | 43 |
| JBB | 43 MILLIMETER |
| HRZ | 43 TO 44 |
| KAJ | 43 TO 45 |
| ECR | 43 TO 46 |
| APW | 44 |
| JYA | 44 INCH |
| JLQ | 44 MILLIMETER |
| CNP | 44 TO 46 |
| AZH | 45 |
| ACE | 45 MILLIMETER |
| CSK | 45 TO 48 |
| AQG | 46 |
| JYB | 46 INCH |
| BDS | 46 TO 48 |
| JWS | 46 TO 52 |
| AQS | 47 |
| FRZ | 47 TO 48 |
| ASU | 47 TO 49 |
| AQV | 48 |
| JYC | 48 INCH |
| ARH | 48 TO 49 |
| ATE | 48 TO 50 |
| HSA | 48 TO 52 |
| JHX | 48-1/4 |
| FTK | 49 |
| AAF | 5 |
| BBQ | 5 INCH |
| CTQ | 5 MILLIMETER |
| BAQ | 5 TO 13 |
| KAR | 5 TO 6 |
| BAR | 5 TO 7 |
| JYD | 50 INCH |
| JTY | 50 MILLIMETER |
| BAG | 5-1/2 |
| BMC | 5-1/2 X-WIDE |
| AAM | 6 |
| KAV | 6 FRENCH |
| CTR | 6 MILLIMETER |
| JHE | 6 TO 7 |
| BAS | 6 TO 8 |
| KAS | 6.65 |
| AYR | 60 MILLIMETER |
| KHJ | 65 MILLIMETER |
| AAT | 7 |
| CTS | 7 MILLIMETER |
| JNZ | 7 TO 11 |
| JHF | 7 TO 8 |
| BAW | 7 TO 9 |
| CJX | 70 MILLIMETER |
| AAZ | 8 |
| KAW | 8 FRENCH |
| BFF | 8 MILLIMETER |
| BBA | 8 TO 10 |
| EHJ | 8 TO 11 |
| JHG | 8 TO 9 |
| BCB | 80 MILLIMETER |
| BBB | 8-1/2 TO 9-1/2 |
| ABJ | 9 |
| CTT | 9 MILLIMETER |
| EHE | 9 TO 10 |
| BBC | 9 TO 11 |
| EHK | 9 TO 12 |
| EHL | 9 TO 13 |
| KFR | 9 TO 9-1/2 |
| AYX | 90 MILLIMETER |
| BTY | 9-1/2 NARROW |
| CTA | ADOLESCENT |
| CTB | ADULT |
| CTC | CHILD |
| CTE | INFANT |
| ATJ | LARGE |
| CTF | LARGE ADULT |
| KJP | LARGE LEFT |
| KHY | LARGE MEDIUM |
| KJQ | LARGE RIGHT |
| ATN | MEDIUM |
| CTG | MEDIUM ADULT |
| BCM | MEDIUM LARGE |
| KGF | MEDIUM LEFT |
| KGG | MEDIUM LONG LEFT |
| KGH | MEDIUM LONG RIGHT |
| KGJ | MEDIUM RIGHT |
| CYT | MEDIUM SMALL |
| CTH | NEWBORN |
| JZM | PEDIATRIC |
| CTJ | PREMATURE |
| AXD | REGULAR |
| AXF | SHORT |
| ATS | SMALL |
| CTK | SMALL ADULT |
| JWA | SMALL CHILD |
| KGD | SMALL LEFT |
| AXG | SMALL MEDIUM |
| KGE | SMALL RIGHT |
| JVC | TALL |
| KLD | TODDLER |
| ATX | UNIVERSAL |
| CTD | X-LARGE |
| JZP | X-LARGE ADULT |
| KGK | X-LARGE LEFT |
| KGL | X-LARGE RIGHT |
| CKM | X-SHORT |
| AVD | X-SMALL |
| KJM | X-SMALL LEFT |
| KJN | X-SMALL RIGHT |
| JVD | X-TALL |
| ECZ | XX-LARGE |
| KJR | XX-LARGE LEFT |
| KJS | XX-LARGE RIGHT |
| KBH | XX-SMALL |
| CTL | YOUTH |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDEKF*;CBBLDEFD$DEZB*;CBBLDEFD$$DEZB*)
| Table 1 |
| Reply Code (AN47) | Reply |
| EFC | ACUTE ANGULATION |
| BGA | ADAPTER |
| ASQ | ADJUSTABLE |
| EFD | ANGULAR ADJUSTMENT TYPE |
| EDV | ANY ACCEPTABLE LOCKING ADJUSTMENT |
| ELD | APERTURE IN EACH DISK |
| EFE | AXILLARY CUSHION |
| ELE | BAR MOUNTED DISK |
| EFF | BOTH ANGULAR ADJUSTMENT SECTIONS |
| ETZ | BOTTOM SIDE FRONT GUSSETS |
| EKB | CALIBRATED |
| DNL | CAP |
| EKC | CLIPPER |
| EGB | COMPOUND LEVERAGE OPERATION METHOD |
| EDL | CUTTING EDGE NEEDLE POINT |
| EDD | DETACHABLE WORKING POINT |
| EKD | DISTENDING SPRING |
| FAP | DOUBLE ARMED END TYPE |
| FBL | ELASTIC CORD ATTACHMENT DEVICE TYPE |
| EES | END TAPER TO ACCOMMODATE TIP |
| ELG | EXTERNAL THREAD |
| FBM | FASTENING TAPE ATTACHMENT DEVICE TYPE |
| FAQ | FEMALE OPENING CONNECTION TYPE |
| EGF | FINGER RING-DISTAL SPUR GRIP TYPE |
| EGE | FITTED CASE INCLOSURE TYPE |
| EEB | FIXED SLOTTED OPENING TYPE |
| CZW | FLEXIBLE |
| EDM | FLEXIBLE SHAFT |
| EFJ | FOLDABLE |
| ELH | FORCE FITTING SOCKET |
| EFK | FOREARM ADJUSTMENT TYPE |
| CZC | FUNGUS RESISTANT |
| EKF | GUIDE PIN |
| EKG | GUIDE PIN ON HANDLE |
| FAR | HARNESS ATTACHMENT |
| CRL | HEPARINIZED |
| EET | HINGED SECTION |
| EFN | HOLLOW |
| EDN | HOLLOW SHAFT |
| EGJ | HUDSON SHANK DESIGN DESIGNATION |
| FAS | INFLATABLE PERIPHERY |
| ELK | INTEGRAL SLEEVE AND ADAPTER RING |
| ELL | INTERNAL THREAD |
| ELM | ISO M SCREW THREAD SERIES |
| ELN | ISO S SCREW THREAD SERIES |
| EER | JACOBS CHUCK ACCOMMODATION |
| FAT | JOINTED TYPE |
| EGK | LONG NECK SIZE DESIGNATION |
| EVM | LUER LOCK SAFETY DEVICE |
| DQG | MAGNETIC |
| FAU | MALE OPENING CONNECTION TYPE |
| FBN | METAL LOOP FASTENER MASK ATTACHMENT TYPE |
| EKK | METAL RING |
| EXN | MINI QUICK COUPLING |
| EDQ | NEEDLE EYE |
| DAV | NONADJUSTABLE |
| EZC | NONANTIGENIC |
| EDE | NONDETACHABLE WORKING POINT |
| FAX | NONFOLDABLE |
| EEE | NONREMOVABLE TUBE WALL SECTION |
| EDH | NONREVERSIBLE |
| AQP | NONSTERILE |
| EZB | NONTOXIC |
| EHU | OBTURATOR |
| EFL | ONE ANGULAR ADJUSTMENT SECTION |
| EGM | PIVOTED LEVER ACTION TYPE |
| EEV | PLAIN END |
| EFP | PLUNGER END THREADS TO ACCOMMODATE HANDLE |
| EFQ | POINT STYLE 1 |
| EFR | POINT STYLE 2 |
| EFS | POINT STYLE 3 |
| EFT | POINT STYLE 4 |
| EFU | POINT STYLE 5 |
| EFV | POINT STYLE 6 |
| EFW | POINT STYLE 7 |
| ELP | POLAR GRID |
| EGL | PREFORMED SHAPE |
| EXM | QUICK RELEASE |
| EGQ | RATCHET GEAR LEVERAGE OPERATION METHOD |
| ELQ | RECTANGULAR GRID |
| EEW | RED BAND |
| EEG | REMOVABLE TUBE WALL SECTION |
| EDK | REPLACEMENT IRRIGATING ATTACHMENT |
| AQS | REUSABLE |
| BWW | REVERSIBLE |
| DJT | RIGID |
| EDR | RIGID SHAFT |
| FBP | SCREW ADJUSTMENT TYPE |
| DAP | SELF-ADHERING |
| ABT | SELF-SEALING |
| EEX | SHIELD |
| EGN | SHORT NECK SIZE DESIGNATION |
| FBB | SINGLE ARMED END TYPE |
| EDW | SLOTTED HEAD SCREW |
| EEJ | SLOTTED TUBE |
| EGP | SPIRAL FLUTED TIP |
| EEY | SPLINT SUPPORT |
| EEZ | STEEL TOP |
| EDF | STEPPED ADJUSTMENT TYPE |
| AFM | STERILE |
| EGR | SWIVEL GUIDE TYPE |
| EEL | SWIVEL SELECTOR DEVICE |
| EDU | TAPERED NEEDLE POINT |
| ELR | THREADED STUD |
| FBF | TIE-UP OPENING CONNECTION TYPE |
| EUA | TOP AND BOTTOM SIDE FRONT GUSSETS |
| EEM | TOP SIDE WALL SECTION |
| ELS | UNF SCREW THREAD SERIES |
| ELT | UNS SCREW THREAD SERIES |
| EEP | VARIABLE SLOTTED OPENING TYPE |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information