Ethanol with impurities common to its production (including water but excluding denaturants) plus additional hydrocarbons or ethers added in specified quantities to satisfy seasonal and geographical volatility requirements.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED66903*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDQJ)
| Table 1 |
| Reply Code (EN02) | Reply |
| QJ | ETHANOL E85 - ALTERNATIVE FUELS |
CLWHDFUEL GRADE CLASSIFICATION
A CLASSIFICATION INDICATING THE RATED GRADE OF THE FUEL.
Enter the applicable reply code from the table below
(CLWHDDT)
| Table 1 |
| Reply Code (AF80) | Reply |
| ES | 75/50 FFO |
| CZ | AVGAS 100/130 |
| CY | AVGAS 100/130 LOW LEAD |
| CX | AVGAS 80/87 |
| BD | AVIATION FUEL |
| DB | AVTAG |
| DC | AVTUR |
| FJ | B2 BIODIESEL |
| FH | B20 BIODIESEL |
| FK | B5 BIODIESEL |
| BU | CRUDE OIL, SOUR |
| BV | CRUDE OIL, SWEET |
| FM | DIESEL, HIGH SULFUR |
| FN | DIESEL, HIGH SULFUR, ARCTIC |
| FP | DIESEL, HIGH SULFUR, LOW TEMP |
| FQ | DIESEL, LOW SULFUR |
| FR | DIESEL, LOW SULFUR, ARCTIC |
| FS | DIESEL, LOW SULFUR, LOW TEMP |
| FT | DIESEL, MARINE |
| FU | DIESEL, OVERSEAS PROCUREMENT |
| FV | DIESEL, ULTRA-LOW SULFUR |
| FW | DIESEL, ULTRA-LOW SULFUR, LOW TEMP |
| FA | DISTILLATE FUEL |
| FL | E85 FUEL ETHANOL |
| DL | FUEL OIL NO. 1 |
| DM | FUEL OIL NO. 2 |
| DN | FUEL OIL NO. 4 |
| DP | FUEL OIL NO. 5 HEAVY |
| DQ | FUEL OIL NO. 5 LIGHT |
| DR | FUEL OIL NO. 6 |
| GA | GASOHOL, UNLEADED, MIDGRADE |
| GB | GASOHOL, UNLEADED, PREMIUM |
| GC | GASOHOL, UNLEADED, REGULAR |
| GD | GASOLINE, LEADED, PREMIUM |
| GE | GASOLINE, LEADED, REGULAR |
| FX | GASOLINE, REFORMULATED, MIDGRADE |
| FY | GASOLINE, REFORMULATED, PREMIUM |
| FZ | GASOLINE, REFORMULATED, REGULAR |
| GH | GASOLINE, UNLEADED, MIDGRADE |
| GF | GASOLINE, UNLEADED, PREMIUM |
| GG | GASOLINE, UNLEADED, REGULAR |
| DV | IFO |
| CN | JET A |
| DS | JET A-1 |
| EU | JET A-50 |
| DX | JP-4 |
| DY | JP-5 |
| CP | JP-7 |
| DZ | JP-8 |
| DT | JP-TS |
| EA | KERO/B |
| FB | KEROSENE 1K |
| FC | KEROSENE 2K |
| EV | MGO |
| EH | REFEREE FOR JP-4 |
| EJ | REFEREE FOR JP-5 |
| CF | RJ-1 |
| EM | SPECIAL GRADE MOGAS LOW LEAD |
CSGW*ANATO CODE NUMBER
THE DESIGNATOR WHICH IS ASSIGNED TO THE PRODUCT BY THE NATO MILITARY AGENCY FOR STANDARDIZATION(MAS).
Enter the alpha-numeric reply with a minimum of one character.
(CSGWAM6)
CSWR*JDENSITY VALUE
THE QUOTIENT OF THE PRODUCT MASS BY ITS VOLUME AT A SPECIFIED TEMPERATURE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSWRJHRC2.0*;CSWRJHRC2.0$$JHRC2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| HP | GRAMS PER MILLILITER |
| HR | KILOGRAMS PER CUBIC METER |
| DF | KILOGRAMS PER LITER |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTYG*JDENSITY TEMP
THE TEMPERATURE AT WHICH THE DENSITY IS DETERMINED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTYGJC2.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CLFZ*JFREEZING POINT MAXIMUM TEMP
AN INDICATION OF THE MAXIMUM TEMPERATURE AT WHICH THE ITEM WILL FREEZE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CLFZJAAE2.0*)
| Table 1 |
| Reply Code (AJ40) | Reply |
| AAD | DEG CELSIUS |
| AAE | DEG FAHRENHEIT |
CLWJ*JREID VAPOR PRESSURE RATING
AN INDICATION OF THE ABSOLUTE VAPOR PRESSURE OF VOLATILE PETROLEUM PRODUCTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CLWJJKNB2.0*;CLWJJKNB2.0$$JKNB2.1*)
| Table 1 |
| Reply Code (AG67) | Reply |
| LG | KILOPASCALS |
| KN | MILLIBARS |
| FB | POUNDS PER SQUARE INCH |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTCF*JMINIMUM HEAT OF COMBUSTION VALUE
THE NUMBER OF THERMAL UNITS WHICH IS RELEASED BY COMBUSTION OF THE MASS UNIT OF THE FUEL (FORMED,UNCONDENSED WATER) IN OXYGEN.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTCFJCY2.0*;CTCFJCY2.0$JCY2.1*)
| Table 1 |
| Reply Code (AG20) | Reply |
| CY | BRITISH THERMAL UNITS PER POUND |
| CZ | CALORIES PER GRAM |
| DL | JOULES PER KILOGRAM |
| DM | MEGAJOULES PER KILOGRAM |
CLWL*BASTM MOTOR METHOD MINIMUM OCTANE NUMBER
THE MINIMUM OCTANE NUMBER AS DETERMINED BY THE AMERICAN SOCIETY FOR TESTING MATERIALS MOTOR METHOD.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CLWLB2.0)
CLWM*BASTM RESEARCH METHOD MINIMUM OCTANE NUMBER
THE MINIMUM OCTANE NUMBER AS DETERMINED BY THE AMERICAN SOCIETY FOR TESTING MATERIALS RESEARCH METHOD.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CLWMB2.0)
CTPP*BAVIATION LEAN MIXTURE OCTANE NUMBER
AN INDICATION OF THE AVIATION LEAN MIXTURE OCTANE NUMBER.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CTPPB2.0)
CWAK*BAVIATION RICH MIXTURE OCTANE NUMBER
AN INDICATION OF THE AVIATION RICH MIXTURE OCTANE NUMBER.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CWAKB2.0)
CTRL*JMAXIMUM ALLOWABLE TETRAETHYL LEAD
A MEASUREMENT OF THE MAXIMUM TETRAETHYL LEAD ALLOWABLE IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTRLJCF2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| CF | GRAMS PER LITER |
| LF | MILLILITERS PER GALLON |
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDBU0000)
| Table 1 |
| Reply Code (AD06) | Reply |
| BU0000 | BLUE |
| GR0000 | GREEN |
| PU0000 | PURPLE |
| RE0000 | RED |
| MS0261 | UNDYED-INVALID |
CSTK*ACOPPER CORROSION CLASSIFICATION NUMBER
AN INDICATION OF THE ASTM COPPER CORROSION CLASSIFICATION IN ACCORDANCE WITH IP 154,ASTM D130 AT 100 DEG CELSIUS.
Enter the alpha-numeric reply with a minimum of one character.
(CSTKAY1)
CWDB*BMAXIMUM AMOUNT OF EXISTENT GUM
THE MASS,IN MILLIGRAMS,OF THE RESIDUE OBTAINED BY EVAPORATION OF 100 MILLILITERS OF THE PRODUCT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CWDBB2.0)
CLFT*BMAXIMUM SULPHUR CONTENT PERCENTAGE BY WEIGHT
THE PERCENTAGE BY WEIGHT OF THE MAXIMUM SULPHUR CONTENT OF THE ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CLFTB2.0)
CRWW*BMAXIMUM AROMATICS PERCENTAGE BY VOLUME
A MEASUREMENT OF THE MAXIMUM AROMATICS OCCURING IN THE ITEM,EXPRESSED IN PERCENT BY VOLUME.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CRWWB2.0)
CTBQ*BMAXIMUM OLEFINS CONTENT PERCENTAGE BY VOLUME
A MEASUREMENT OF THE MAXIMUM OLEFINS CONTENT OF THE ITEM,EXPRESSED IN PERCENT BY VOLUME.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CTBQB2.0)
CRWZ*ADISTILLATION POINT PERCENTAGE AT MAXIMUM TEMP
AN INDICATION OF THE MAXIMUM TEMPERATURE AT WHICH A CERTAIN DISTILLATION POINT IS REACHED,EXPRESSED IN PERCENT.
Enter the alpha-numeric reply with a minimum of one character.
(CRWZAH0)
CSLJ*BMAXIMUM DISTILLATION RESIDUE VOLUME PERCENTAGE
AN INDICATION OF THE MAXIMUM AMOUNT OF MATTER REMAINING AFTER DISTILLATION,EXPRESSED IN PERCENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CSLJB2.0)
CTDH*BMAXIMUM DISTILLATION LOSS VOLUME PERCENTAGE
AN INDICATION OF THE MAXIMUM AMOUNT LOST BY DISTILLATION,EXPRESSED IN PERCENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CTDHB2.0)
CTDZ*JEVAPORATION PERCENTAGE AT MAXIMUM TEMP
AN INDICATION OF THE MAXIMUM TEMPERATURE AT WHICH A SPECIFIED EVAPORATION OF THE ITEM OCCURS,EXPRESSED IN PERCENT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTDZJJBAAD2.0*)
| Table 1 |
| Reply Code (AD21) | Reply |
| KF | 10 PERCENT |
| HP | 20 PERCENT |
| JB | 50 PERCENT |
| JG | 90 PERCENT |
| Table 2 |
| Reply Code (AJ40) | Reply |
| AAD | DEG CELSIUS |
| AAE | DEG FAHRENHEIT |
CRZQ*GMANDATORY ADDITIVE
THE MANDATORY ADDITIVE(S) USED TO IMPART A DESIRED CHARACTERISTIC.
Enter clear text.
(CRZQGCLEARTEXT)
CWAY*DSUPPLY CLASSIFICATION
A CLASSIFICATION USED TO IDENTIFY THE SUPPLY FORM BY WHICH THE ITEM IS DELIVERED.
Enter the applicable reply code from the table below
(CWAYDAD)
| Table 1 |
| Reply Code (AM69) | Reply |
| AB | BULK |
| AD | PACKAGED |
AKKF*JQUANTITY WITHIN EACH UNIT PACKAGE
THE NUMBER OF THE VOLUME,FORM,OR THE DOSAGE WITHIN EACH UNIT PACKAGE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKKFJCC2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| FK | GALLON, IMPERIAL MEASURE |
| AF | GALLONS |
| CC | LITERS |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CSPB*BMAXIMUM ASPHALTENE CONTENT PERCENTAGE BY WEIGHT
A MEASUREMENT OF THE MAXIMUM ASPHALTENE CONTENT OF THE ITEM,EXPRESSED IN PERCENT BY WEIGHT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CSPBB2.0)
CWJC*BMAXIMUM WATER CONTENT PERCENTAGE BY VOLUME
A MEASUREMENT OF THE MAXIMUM WATER CONTENT OF THE ITEM,EXPRESSED IN PERCENT BY VOLUME.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CWJCB2.0)
CLGK*AMILITARY SYMBOL
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MILITARY NUMBER.
Enter the alpha-numeric reply with a minimum of one character.
(CLGKAI1)
CWKN*GPERMISSIBLE ADDITIVE
THOSE PERMISSIBLE ADDITIVES USED TO IMPART A DESIRED CHARACTERISTIC.
Enter clear text.
(CWKNGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ024*;HZRDDHAZ354$$DHAZ025*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ353 | AVIATION FUEL |
| HAZ354 | DISTILLATE FUEL |
| HAZ021 | FUEL OIL NO. 1 |
| HAZ022 | FUEL OIL NO. 2 |
| HAZ023 | FUEL OIL NO. 4 |
| HAZ024 | FUEL OIL NO. 5 HEAVY |
| HAZ025 | FUEL OIL NO. 5 LIGHT |
| HAZ026 | FUEL OIL NO. 6 |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information