A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
ISAC Reply 3AEE added to MRC AKPX.
ISAC Reply 3ANR added to MRC AKPX.
ISAC Reply 3ANV added to MRC AKPX.
ISAC Reply 3ANZ added to MRC AKPX.
ISAC Reply 3APE added to MRC AKPX.
ISAC Reply 3APF added to MRC AKPX.
ISAC Reply 3APG added to MRC AKPX.
ISAC Reply 3APH added to MRC AKPX.
ISAC Reply 3API added to MRC AKPX.
ISAC Reply 3APJ added to MRC AKPX.
ISAC Reply 3APL added to MRC AKPX.
ISAC Reply 3HOU added to MRC AKPX.
ISAC Reply 1A deleted from MRC AKPX.
ISAC Reply 1B deleted from MRC AKPX.
ISAC Reply 1C deleted from MRC AKPX.
ISAC Reply 1D deleted from MRC AKPX.
ISAC Reply 1E deleted from MRC AKPX.
ISAC Reply 1F deleted from MRC AKPX.
ISAC Reply 1G deleted from MRC AKPX.
ISAC Reply 1H deleted from MRC AKPX.
ISAC Reply 1J deleted from MRC AKPX.
ISAC Reply 1K deleted from MRC AKPX.
ISAC Reply 1L deleted from MRC AKPX.
ISAC Reply 1M deleted from MRC AKPX.
ISAC Reply 1X deleted from MRC AKPX.
ISAC Reply 1Z deleted from MRC AKPX.
ISAC Reply 1A deleted from MRC AKPX.
ISAC Reply 1B deleted from MRC AKPX.
ISAC Reply 1C deleted from MRC AKPX.
ISAC Reply 1D deleted from MRC AKPX.
ISAC Reply 3AEE added to MRC AKPY.
ISAC Reply 3ANO added to MRC AKPY.
ISAC Reply 3ANS added to MRC AKPY.
ISAC Reply 3ANW added to MRC AKPY.
ISAC Reply 3AOA added to MRC AKPY.
ISAC Reply 3AOE added to MRC AKPY.
ISAC Reply 3AOI added to MRC AKPY.
ISAC Reply 3AOL added to MRC AKPY.
ISAC Reply 3AOO added to MRC AKPY.
ISAC Reply 3AOR added to MRC AKPY.
ISAC Reply 3APE added to MRC AKPY.
ISAC Reply 3APF added to MRC AKPY.
ISAC Reply 3APG added to MRC AKPY.
ISAC Reply 3APH added to MRC AKPY.
ISAC Reply 3API added to MRC AKPY.
ISAC Reply 3APJ added to MRC AKPY.
ISAC Reply 3HOU added to MRC AKPY.
ISAC Reply 1A deleted from MRC AKPY.
ISAC Reply 1B deleted from MRC AKPY.
ISAC Reply 1C deleted from MRC AKPY.
ISAC Reply 1D deleted from MRC AKPY.
ISAC Reply 1E deleted from MRC AKPY.
ISAC Reply 1F deleted from MRC AKPY.
ISAC Reply 1G deleted from MRC AKPY.
ISAC Reply 1H deleted from MRC AKPY.
ISAC Reply 1J deleted from MRC AKPY.
ISAC Reply 1K deleted from MRC AKPY.
ISAC Reply 1L deleted from MRC AKPY.
ISAC Reply 1M deleted from MRC AKPY.
ISAC Reply 1X deleted from MRC AKPY.
ISAC Reply 1Z deleted from MRC AKPY.
ISAC Reply 1A deleted from MRC AKPY.
ISAC Reply 1B deleted from MRC AKPY.
ISAC Reply 1C deleted from MRC AKPY.
ISAC Reply 1D deleted from MRC AKPY.
ISAC Reply 3AEE added to MRC CSHW.
ISAC Reply 3APE added to MRC CSHW.
ISAC Reply 3APF added to MRC CSHW.
ISAC Reply 3APG added to MRC CSHW.
ISAC Reply 3APH added to MRC CSHW.
ISAC Reply 3API added to MRC CSHW.
ISAC Reply 3APJ added to MRC CSHW.
ISAC Reply 3APL added to MRC CSHW.
ISAC Reply 3HOU added to MRC CSHW.
ISAC Reply 1A deleted from MRC CSHW.
ISAC Reply 1B deleted from MRC CSHW.
ISAC Reply 1C deleted from MRC CSHW.
ISAC Reply 1D deleted from MRC CSHW.
ISAC Reply 1E deleted from MRC CSHW.
ISAC Reply 1F deleted from MRC CSHW.
ISAC Reply 1G deleted from MRC CSHW.
ISAC Reply 1H deleted from MRC CSHW.
ISAC Reply 1J deleted from MRC CSHW.
ISAC Reply 1K deleted from MRC CSHW.
ISAC Reply 1L deleted from MRC CSHW.
ISAC Reply 1M deleted from MRC CSHW.
ISAC Reply 1X deleted from MRC CSHW.
ISAC Reply 1Z deleted from MRC CSHW.
ISAC Reply 1A deleted from MRC CSHW.
ISAC Reply 1B deleted from MRC CSHW.
ISAC Reply 1C deleted from MRC CSHW.
ISAC Reply 1D deleted from MRC CSHW.
ISAC Reply 3ABM added to MRC CTZF.
ISAC Reply 3ABN added to MRC CTZF.
ISAC Reply 3ABO added to MRC CTZF.
ISAC Reply 3ABP added to MRC CTZF.
ISAC Reply 3ABQ added to MRC CTZF.
ISAC Reply 3ABR added to MRC CTZF.
ISAC Reply 3ABS added to MRC CTZF.
ISAC Reply 3ABT added to MRC CTZF.
ISAC Reply 3ABU added to MRC CTZF.
ISAC Reply 3AEE added to MRC CTZF.
ISAC Reply 3AFU added to MRC CTZF.
ISAC Reply 3AFV added to MRC CTZF.
ISAC Reply 3AFW added to MRC CTZF.
ISAC Reply 3AFX added to MRC CTZF.
ISAC Reply 3AGK added to MRC CTZF.
ISAC Reply 3HOU added to MRC CTZF.
ISAC Reply 1A deleted from MRC CTZF.
ISAC Reply 1B deleted from MRC CTZF.
ISAC Reply 1C deleted from MRC CTZF.
ISAC Reply 1D deleted from MRC CTZF.
ISAC Reply 1E deleted from MRC CTZF.
ISAC Reply 1F deleted from MRC CTZF.
ISAC Reply 1G deleted from MRC CTZF.
ISAC Reply 1H deleted from MRC CTZF.
ISAC Reply 1J deleted from MRC CTZF.
ISAC Reply 1K deleted from MRC CTZF.
ISAC Reply 1L deleted from MRC CTZF.
ISAC Reply 1M deleted from MRC CTZF.
ISAC Reply 1X deleted from MRC CTZF.
ISAC Reply 1Z deleted from MRC CTZF.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3DTH added to MRC HUES.
ISAC Reply 3DTI added to MRC HUES.
ISAC Reply 3DTJ added to MRC HUES.
ISAC Reply 3DTK added to MRC HUES.
ISAC Reply 3DTL added to MRC HUES.
ISAC Reply 3DTM added to MRC HUES.
ISAC Reply 3DTN added to MRC HUES.
ISAC Reply 3DTO added to MRC HUES.
ISAC Reply 3DTP added to MRC HUES.
ISAC Reply 3DTQ added to MRC HUES.
ISAC Reply 3DTR added to MRC HUES.
ISAC Reply 3DTS added to MRC HUES.
ISAC Reply 3DTT added to MRC HUES.
ISAC Reply 3DTU added to MRC HUES.
ISAC Reply 3DTV added to MRC HUES.
ISAC Reply 3DTW added to MRC HUES.
ISAC Reply 3DTX added to MRC HUES.
ISAC Reply 3DTY added to MRC HUES.
ISAC Reply 3DTZ added to MRC HUES.
ISAC Reply 3DUA added to MRC HUES.
ISAC Reply 3DUB added to MRC HUES.
ISAC Reply 3DUC added to MRC HUES.
ISAC Reply 3DUD added to MRC HUES.
ISAC Reply 3DUE added to MRC HUES.
ISAC Reply 3DUF added to MRC HUES.
ISAC Reply 3DUG added to MRC HUES.
ISAC Reply 3DUH added to MRC HUES.
ISAC Reply 3DUI added to MRC HUES.
ISAC Reply 3DUJ added to MRC HUES.
ISAC Reply 3DUK added to MRC HUES.
ISAC Reply 3DUL added to MRC HUES.
ISAC Reply 3DUM added to MRC HUES.
ISAC Reply 3DUN added to MRC HUES.
ISAC Reply 3DUO added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 3IGF added to MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
ISAC Reply 1E deleted from MRC HUES.
ISAC Reply 1F deleted from MRC HUES.
ISAC Reply 1G deleted from MRC HUES.
ISAC Reply 1H deleted from MRC HUES.
ISAC Reply 1J deleted from MRC HUES.
ISAC Reply 1K deleted from MRC HUES.
ISAC Reply 1L deleted from MRC HUES.
ISAC Reply 1M deleted from MRC HUES.
ISAC Reply 1X deleted from MRC HUES.
ISAC Reply 1Z deleted from MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
ISAC Reply 3ABM added to MRC CTZT.
ISAC Reply 3ABN added to MRC CTZT.
ISAC Reply 3ABO added to MRC CTZT.
ISAC Reply 3ABP added to MRC CTZT.
ISAC Reply 3ABQ added to MRC CTZT.
ISAC Reply 3ABR added to MRC CTZT.
ISAC Reply 3ABS added to MRC CTZT.
ISAC Reply 3ABT added to MRC CTZT.
ISAC Reply 3ABU added to MRC CTZT.
ISAC Reply 3AEE added to MRC CTZT.
ISAC Reply 3AFU added to MRC CTZT.
ISAC Reply 3AFV added to MRC CTZT.
ISAC Reply 3AFW added to MRC CTZT.
ISAC Reply 3AFX added to MRC CTZT.
ISAC Reply 3AGK added to MRC CTZT.
ISAC Reply 3HOU added to MRC CTZT.
ISAC Reply 1A deleted from MRC CTZT.
ISAC Reply 1B deleted from MRC CTZT.
ISAC Reply 1C deleted from MRC CTZT.
ISAC Reply 1D deleted from MRC CTZT.
ISAC Reply 1E deleted from MRC CTZT.
ISAC Reply 1F deleted from MRC CTZT.
ISAC Reply 1G deleted from MRC CTZT.
ISAC Reply 1H deleted from MRC CTZT.
ISAC Reply 1J deleted from MRC CTZT.
ISAC Reply 1K deleted from MRC CTZT.
ISAC Reply 1L deleted from MRC CTZT.
ISAC Reply 1M deleted from MRC CTZT.
ISAC Reply 1X deleted from MRC CTZT.
ISAC Reply 1Z deleted from MRC CTZT.
ISAC Reply 3AEE added to MRC CQMK.
ISAC Reply 3ARP added to MRC CQMK.
ISAC Reply 3ARQ added to MRC CQMK.
ISAC Reply 3ARR added to MRC CQMK.
ISAC Reply 3ARS added to MRC CQMK.
ISAC Reply 3ART added to MRC CQMK.
ISAC Reply 3ARV added to MRC CQMK.
ISAC Reply 3ARX added to MRC CQMK.
ISAC Reply 3ARZ added to MRC CQMK.
ISAC Reply 3HOU added to MRC CQMK.
ISAC Reply 1A deleted from MRC CQMK.
ISAC Reply 1B deleted from MRC CQMK.
ISAC Reply 1C deleted from MRC CQMK.
ISAC Reply 1D deleted from MRC CQMK.
ISAC Reply 1E deleted from MRC CQMK.
ISAC Reply 1F deleted from MRC CQMK.
ISAC Reply 1B deleted from MRC CQMK.
ISAC Reply 1C deleted from MRC CQMK.
ISAC Reply 3AEE added to MRC CTHF.
ISAC Reply 3ARP added to MRC CTHF.
ISAC Reply 3ARQ added to MRC CTHF.
ISAC Reply 3ARR added to MRC CTHF.
ISAC Reply 3ARS added to MRC CTHF.
ISAC Reply 3ART added to MRC CTHF.
ISAC Reply 3ARV added to MRC CTHF.
ISAC Reply 3ARX added to MRC CTHF.
ISAC Reply 3ARZ added to MRC CTHF.
ISAC Reply 3HOU added to MRC CTHF.
ISAC Reply 1A deleted from MRC CTHF.
ISAC Reply 1B deleted from MRC CTHF.
ISAC Reply 1C deleted from MRC CTHF.
ISAC Reply 1D deleted from MRC CTHF.
ISAC Reply 1E deleted from MRC CTHF.
ISAC Reply 1F deleted from MRC CTHF.
ISAC Reply 1B deleted from MRC CTHF.
ISAC Reply 1C deleted from MRC CTHF.
ISAC Reply 3AEE added to MRC AYDW.
ISAC Reply 3ALX added to MRC AYDW.
ISAC Reply 3ALY added to MRC AYDW.
ISAC Reply 3ALZ added to MRC AYDW.
ISAC Reply 3AMA added to MRC AYDW.
ISAC Reply 3AMJ added to MRC AYDW.
ISAC Reply 3AMK added to MRC AYDW.
ISAC Reply 3HOU added to MRC AYDW.
ISAC Reply 1A deleted from MRC AYDW.
ISAC Reply 1B deleted from MRC AYDW.
ISAC Reply 1C deleted from MRC AYDW.
ISAC Reply 1D deleted from MRC AYDW.
ISAC Reply 1E deleted from MRC AYDW.
ISAC Reply 1F deleted from MRC AYDW.
ISAC Reply 1G deleted from MRC AYDW.
ISAC Reply 1H deleted from MRC AYDW.
ISAC Reply 1J deleted from MRC AYDW.
ISAC Reply 1K deleted from MRC AYDW.
ISAC Reply 1L deleted from MRC AYDW.
ISAC Reply 1M deleted from MRC AYDW.
ISAC Reply 1X deleted from MRC AYDW.
ISAC Reply 1Z deleted from MRC AYDW.
ISAC Reply 3AEE added to MRC CRJH.
ISAC Reply 3ALX added to MRC CRJH.
ISAC Reply 3ALY added to MRC CRJH.
ISAC Reply 3ALZ added to MRC CRJH.
ISAC Reply 3AMA added to MRC CRJH.
ISAC Reply 3AMB added to MRC CRJH.
ISAC Reply 3AMC added to MRC CRJH.
ISAC Reply 3AMD added to MRC CRJH.
ISAC Reply 3AME added to MRC CRJH.
ISAC Reply 3AMF added to MRC CRJH.
ISAC Reply 3AMG added to MRC CRJH.
ISAC Reply 3AMH added to MRC CRJH.
ISAC Reply 3AMI added to MRC CRJH.
ISAC Reply 3AMJ added to MRC CRJH.
ISAC Reply 3AMK added to MRC CRJH.
ISAC Reply 3HOU added to MRC CRJH.
ISAC Reply 1A deleted from MRC CRJH.
ISAC Reply 1B deleted from MRC CRJH.
ISAC Reply 1C deleted from MRC CRJH.
ISAC Reply 1D deleted from MRC CRJH.
ISAC Reply 1E deleted from MRC CRJH.
ISAC Reply 1F deleted from MRC CRJH.
ISAC Reply 1G deleted from MRC CRJH.
ISAC Reply 1H deleted from MRC CRJH.
ISAC Reply 1J deleted from MRC CRJH.
ISAC Reply 1K deleted from MRC CRJH.
ISAC Reply 1L deleted from MRC CRJH.
ISAC Reply 1M deleted from MRC CRJH.
ISAC Reply 1X deleted from MRC CRJH.
ISAC Reply 1Z deleted from MRC CRJH.
ISAC Reply 3AEE added to MRC CRSJ.
ISAC Reply 3AMJ added to MRC CRSJ.
ISAC Reply 3AMK added to MRC CRSJ.
ISAC Reply 3HOU added to MRC CRSJ.
ISAC Reply 1A deleted from MRC CRSJ.
ISAC Reply 1B deleted from MRC CRSJ.
ISAC Reply 1C deleted from MRC CRSJ.
ISAC Reply 1D deleted from MRC CRSJ.
ISAC Reply 1E deleted from MRC CRSJ.
ISAC Reply 1F deleted from MRC CRSJ.
ISAC Reply 1G deleted from MRC CRSJ.
ISAC Reply 1H deleted from MRC CRSJ.
ISAC Reply 1J deleted from MRC CRSJ.
ISAC Reply 1K deleted from MRC CRSJ.
ISAC Reply 1L deleted from MRC CRSJ.
ISAC Reply 1M deleted from MRC CRSJ.
ISAC Reply 1X deleted from MRC CRSJ.
ISAC Reply 1Z deleted from MRC CRSJ.
ISAC Reply 3AEE added to MRC ABNB.
ISAC Reply 3AMJ added to MRC ABNB.
ISAC Reply 3HOU added to MRC ABNB.
ISAC Reply 1A deleted from MRC ABNB.
ISAC Reply 1B deleted from MRC ABNB.
ISAC Reply 1C deleted from MRC ABNB.
ISAC Reply 1D deleted from MRC ABNB.
ISAC Reply 1E deleted from MRC ABNB.
ISAC Reply 1F deleted from MRC ABNB.
ISAC Reply 1G deleted from MRC ABNB.
ISAC Reply 1H deleted from MRC ABNB.
ISAC Reply 1J deleted from MRC ABNB.
ISAC Reply 1K deleted from MRC ABNB.
ISAC Reply 1L deleted from MRC ABNB.
ISAC Reply 1M deleted from MRC ABNB.
ISAC Reply 1X deleted from MRC ABNB.
ISAC Reply 1Z deleted from MRC ABNB.
ISAC Reply 3AEE added to MRC ABNC.
ISAC Reply 3AMJ added to MRC ABNC.
ISAC Reply 3HOU added to MRC ABNC.
ISAC Reply 1A deleted from MRC ABNC.
ISAC Reply 1B deleted from MRC ABNC.
ISAC Reply 1C deleted from MRC ABNC.
ISAC Reply 1D deleted from MRC ABNC.
ISAC Reply 1E deleted from MRC ABNC.
ISAC Reply 1F deleted from MRC ABNC.
ISAC Reply 1G deleted from MRC ABNC.
ISAC Reply 1H deleted from MRC ABNC.
ISAC Reply 1J deleted from MRC ABNC.
ISAC Reply 1K deleted from MRC ABNC.
ISAC Reply 1L deleted from MRC ABNC.
ISAC Reply 1M deleted from MRC ABNC.
ISAC Reply 1X deleted from MRC ABNC.
ISAC Reply 1Z deleted from MRC ABNC.
ISAC Reply 3AEE added to MRC ABWV.
ISAC Reply 3AMJ added to MRC ABWV.
ISAC Reply 3HOU added to MRC ABWV.
ISAC Reply 1A deleted from MRC ABWV.
ISAC Reply 1B deleted from MRC ABWV.
ISAC Reply 1C deleted from MRC ABWV.
ISAC Reply 1D deleted from MRC ABWV.
ISAC Reply 1E deleted from MRC ABWV.
ISAC Reply 1F deleted from MRC ABWV.
ISAC Reply 1G deleted from MRC ABWV.
ISAC Reply 1H deleted from MRC ABWV.
ISAC Reply 1J deleted from MRC ABWV.
ISAC Reply 1K deleted from MRC ABWV.
ISAC Reply 1L deleted from MRC ABWV.
ISAC Reply 1M deleted from MRC ABWV.
ISAC Reply 1X deleted from MRC ABWV.
ISAC Reply 1Z deleted from MRC ABWV.
ISAC Reply 3AEE added to MRC ABXF.
ISAC Reply 3AMJ added to MRC ABXF.
ISAC Reply 3HOU added to MRC ABXF.
ISAC Reply 1A deleted from MRC ABXF.
ISAC Reply 1B deleted from MRC ABXF.
ISAC Reply 1C deleted from MRC ABXF.
ISAC Reply 1D deleted from MRC ABXF.
ISAC Reply 1E deleted from MRC ABXF.
ISAC Reply 1F deleted from MRC ABXF.
ISAC Reply 1G deleted from MRC ABXF.
ISAC Reply 1H deleted from MRC ABXF.
ISAC Reply 1J deleted from MRC ABXF.
ISAC Reply 1K deleted from MRC ABXF.
ISAC Reply 1L deleted from MRC ABXF.
ISAC Reply 1M deleted from MRC ABXF.
ISAC Reply 1X deleted from MRC ABXF.
ISAC Reply 1Z deleted from MRC ABXF.
ISAC Reply 3AEE added to MRC AXGY.
ISAC Reply 3ASZ added to MRC AXGY.
ISAC Reply 3ATA added to MRC AXGY.
ISAC Reply 3ATB added to MRC AXGY.
ISAC Reply 3ATD added to MRC AXGY.
ISAC Reply 3HOU added to MRC AXGY.
ISAC Reply 1A deleted from MRC AXGY.
ISAC Reply 1B deleted from MRC AXGY.
ISAC Reply 1C deleted from MRC AXGY.
ISAC Reply 1D deleted from MRC AXGY.
ISAC Reply 1X deleted from MRC AXGY.
ISAC Reply 3AEE added to MRC AEBV.
ISAC Reply 3ASZ added to MRC AEBV.
ISAC Reply 3ATA added to MRC AEBV.
ISAC Reply 3ATD added to MRC AEBV.
ISAC Reply 3HOU added to MRC AEBV.
ISAC Reply 1A deleted from MRC AEBV.
ISAC Reply 1B deleted from MRC AEBV.
ISAC Reply 1C deleted from MRC AEBV.
ISAC Reply 1D deleted from MRC AEBV.
ISAC Reply 1X deleted from MRC AEBV.
ISAC Reply 3AEE added to MRC ABTD.
ISAC Reply 3ASZ added to MRC ABTD.
ISAC Reply 3ATD added to MRC ABTD.
ISAC Reply 3HOU added to MRC ABTD.
ISAC Reply 1A deleted from MRC ABTD.
ISAC Reply 1B deleted from MRC ABTD.
ISAC Reply 1C deleted from MRC ABTD.
ISAC Reply 1D deleted from MRC ABTD.
ISAC Reply 1X deleted from MRC ABTD.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3ASZ added to MRC THSD.
ISAC Reply 3ATD added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1X deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3ASZ added to MRC CQJX.
ISAC Reply 3ATD added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1C deleted from MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1X deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3ASZ added to MRC AAJD.
ISAC Reply 3ATD added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1C deleted from MRC AAJD.
ISAC Reply 1D deleted from MRC AAJD.
ISAC Reply 1X deleted from MRC AAJD.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3ASZ added to MRC CMLP.
ISAC Reply 3ATD added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1C deleted from MRC CMLP.
ISAC Reply 1D deleted from MRC CMLP.
ISAC Reply 1X deleted from MRC CMLP.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3ATD added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 1A deleted from MRC CQQR.
ISAC Reply 1B deleted from MRC CQQR.
ISAC Reply 1C deleted from MRC CQQR.
ISAC Reply 1D deleted from MRC CQQR.
ISAC Reply 1X deleted from MRC CQQR.
ISAC Reply 3AEE added to MRC AASA.
ISAC Reply 3ATD added to MRC AASA.
ISAC Reply 3HOU added to MRC AASA.
ISAC Reply 1A deleted from MRC AASA.
ISAC Reply 1B deleted from MRC AASA.
ISAC Reply 1C deleted from MRC AASA.
ISAC Reply 1D deleted from MRC AASA.
ISAC Reply 1X deleted from MRC AASA.
ISAC Reply 3AEE added to MRC CQYJ.
ISAC Reply 3ASZ added to MRC CQYJ.
ISAC Reply 3ATA added to MRC CQYJ.
ISAC Reply 3ATD added to MRC CQYJ.
ISAC Reply 3HOU added to MRC CQYJ.
ISAC Reply 1A deleted from MRC CQYJ.
ISAC Reply 1B deleted from MRC CQYJ.
ISAC Reply 1C deleted from MRC CQYJ.
ISAC Reply 1D deleted from MRC CQYJ.
ISAC Reply 1X deleted from MRC CQYJ.
ISAC Reply 3AEE added to MRC AEJN.
ISAC Reply 3ASZ added to MRC AEJN.
ISAC Reply 3ATD added to MRC AEJN.
ISAC Reply 3HOU added to MRC AEJN.
ISAC Reply 1A deleted from MRC AEJN.
ISAC Reply 1B deleted from MRC AEJN.
ISAC Reply 1C deleted from MRC AEJN.
ISAC Reply 1D deleted from MRC AEJN.
ISAC Reply 1X deleted from MRC AEJN.
ISAC Reply 3AEE added to MRC AFDS.
ISAC Reply 3ASZ added to MRC AFDS.
ISAC Reply 3ATA added to MRC AFDS.
ISAC Reply 3ATD added to MRC AFDS.
ISAC Reply 3HOU added to MRC AFDS.
ISAC Reply 1A deleted from MRC AFDS.
ISAC Reply 1B deleted from MRC AFDS.
ISAC Reply 1C deleted from MRC AFDS.
ISAC Reply 1D deleted from MRC AFDS.
ISAC Reply 1X deleted from MRC AFDS.
ISAC Reply 3AEE added to MRC AFDT.
ISAC Reply 3ATD added to MRC AFDT.
ISAC Reply 3HOU added to MRC AFDT.
ISAC Reply 1A deleted from MRC AFDT.
ISAC Reply 1B deleted from MRC AFDT.
ISAC Reply 1C deleted from MRC AFDT.
ISAC Reply 1D deleted from MRC AFDT.
ISAC Reply 1X deleted from MRC AFDT.
ISAC Reply 3AEE added to MRC AFDU.
ISAC Reply 3ATD added to MRC AFDU.
ISAC Reply 3HOU added to MRC AFDU.
ISAC Reply 1A deleted from MRC AFDU.
ISAC Reply 1B deleted from MRC AFDU.
ISAC Reply 1C deleted from MRC AFDU.
ISAC Reply 1D deleted from MRC AFDU.
ISAC Reply 1X deleted from MRC AFDU.
ISAC Reply 3AEE added to MRC AFDV.
ISAC Reply 3ASZ added to MRC AFDV.
ISAC Reply 3ATA added to MRC AFDV.
ISAC Reply 3ATD added to MRC AFDV.
ISAC Reply 3HOU added to MRC AFDV.
ISAC Reply 1A deleted from MRC AFDV.
ISAC Reply 1B deleted from MRC AFDV.
ISAC Reply 1C deleted from MRC AFDV.
ISAC Reply 1D deleted from MRC AFDV.
ISAC Reply 1X deleted from MRC AFDV.
ISAC Reply 3AEE added to MRC AFDW.
ISAC Reply 3ATD added to MRC AFDW.
ISAC Reply 3HOU added to MRC AFDW.
ISAC Reply 1A deleted from MRC AFDW.
ISAC Reply 1B deleted from MRC AFDW.
ISAC Reply 1C deleted from MRC AFDW.
ISAC Reply 1D deleted from MRC AFDW.
ISAC Reply 1X deleted from MRC AFDW.
MRC AATB has been deleted
MRC CRTY has been deleted
MRC CZGW has been deleted
MRC CTTC has been deleted
MRC AAJE has been deleted
MRC ALAQ has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED62415*)
IF STYLE/REPLY CODE(s) 1, 2, 3, 6, 7, 11, 13, 14, 15, 17, 21, 26, 27, 28, 29 OR 30 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABKW and ABHP)
IF STYLE/REPLY CODE(s) 4, 5 OR 10 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABKW and ABHP)
IF STYLE/REPLY CODE(s) 4A, 5A OR 10A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADAV)
IF STYLE/REPLY CODE(s) 8, 9, 12, 16, 18, 19 OR 20 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABHP)
IF STYLE/REPLY CODE(s) 22 OR 25 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABMK and ADPR)
IF STYLE/REPLY CODE(s) 23 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ADPR)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL10)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AJ10001 | 1 | TAP, CIRCUIT SELECTOR |
| DR03125 | 10 | TAP, CIRCULAR FRAME |
| DR03126 | 10A | TAP, CIRCULAR FRAME |
| AJ10011 | 11 | TAP, SQUARE FRAME |
| AJ10012 | 12 | SNAP OR LINE |
| AJ10013 | 13 | IN-LINE, PILE-UP, PANEL MOUNT |
| AJ10014 | 14 | IN-LINE, PILE-UP, BUSHING MOUNT |
| AJ10015 | 15 | IN-LINE, PILE-UP, BUSHING MOUNT |
| AJ10016 | 16 | CIRCULAR, CAM ACTUATED |
| AJ10017 | 17 | IN-LINE, CAM ACTUATED |
| AJ10018 | 18 | MINIATURE, BUSHING MOUNT |
| AJ10019 | 19 | MINIATURE, PIN MOUNT |
| AJ10002 | 2 | PARTIAL WAFER, BUSHING MOUNT |
| AJ10020 | 20 | MINIATURE, PIN MOUNT, INTEGRAL KNOB |
| AJ10021 | 21 | SQUARE WAFER, PANEL MOUNT |
| AJ10022 | 22 | SWITCH SECTION, ROTARY |
| AJ10023 | 23 | SWITCH SECTION, ROTARY |
| AJ10024 | 25 | SWITCH SECTION, ROTARY |
| AJ10025 | 26 | MINIATURE BUSHING MOUNT INTEGRAL KNOB |
| AJ10026 | 27 | RECTANGULAR PANEL MOUNT |
| AJ10027 | 28 | MINIATURE PANEL MOUNT |
| AJ10028 | 29 | RECTANGULAR INDICATING |
| AJ10003 | 3 | SEMI-CIRCULAR WAFER, BUSHING MOUNT |
| AJ10029 | 30 | RECTANGULAR INLINE INDICATING |
| DR03121 | 4 | CIRCULAR WAFER, BUSHING MOUNT |
| DR03122 | 4A | CIRCULAR WAFER, BUSHING MOUNT |
| DR03123 | 5 | CIRCULAR WAFER, PANEL MOUNT |
| DR03124 | 5A | CIRCULAR WAFER, PANEL MOUNT |
| AJ10006 | 6 | WAFER, PRINTED BOARD, BUSHING MOUNT |
| AJ10007 | 7 | STRAIGHT WAFER |
| AJ10008 | 8 | TAP, CIRCULAR, BUSHING MOUNT |
| AJ10009 | 9 | TAP, CIRCULAR, BUSHING MOUNT |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPR*JBODY THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A BODY,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPRJAA2.0*;ADPRJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFBHAINDIVIDUAL SECTION QUANTITY
THE NUMBER OF INDIVIDUAL SECTIONS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AFBHA10*)
AKPX*APOLE QUANTITY
THE NUMBER OF POLES INCLUDED IN THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(AKPX3APJA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ANR | FIRST SECTION REAR |
| 3ANV | SECOND SECTION REAR |
| 3ANZ | THIRD SECTION REAR |
| 3APE | SINGLE SECTION FRONT |
| 3APF | SINGLE SECTION IN-LINE |
| 3APG | SINGLE SECTION PERIPHERY |
| 3APH | SINGLE SECTION REAR |
| 3API | EACH SECTION FRONT |
| 3APJ | EACH SECTION IN-LINE |
| 3APL | EACH SECTION REAR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AKPY*ATHROW QUANTITY
THE NUMBER OF POSITIONS TO WHICH THE ITEM MAY BE ACTUATED TO ENERGIZE ELECTRICAL CIRCUITS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(AKPY3AOAA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ANO | FIRST SECTION FRONT |
| 3ANS | SECOND SECTION FRONT |
| 3ANW | THIRD SECTION FRONT |
| 3AOA | FOURTH SECTION FRONT |
| 3AOE | FIFTH SECTION FRONT |
| 3AOI | SIXTH SECTION FRONT |
| 3AOL | SEVENTH SECTION FRONT |
| 3AOO | EIGHTH SECTION FRONT |
| 3AOR | NINTH SECTION FRONT |
| 3APE | SINGLE SECTION FRONT |
| 3APF | SINGLE SECTION IN-LINE |
| 3APG | SINGLE SECTION PERIPHERY |
| 3APH | SINGLE SECTION REAR |
| 3API | EACH SECTION FRONT |
| 3APJ | EACH SECTION IN-LINE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CSHW*DCONTACT SWITCHING ACTION
AN INDICATION OF THE SWITCHING ACTION BY THE CONTACTS OF THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CSHW3APIDC*;CSHW3APIDC$DD*;CSHW3APIDC$$DD*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3APE | SINGLE SECTION FRONT |
| 3APF | SINGLE SECTION IN-LINE |
| 3APG | SINGLE SECTION PERIPHERY |
| 3APH | SINGLE SECTION REAR |
| 3API | EACH SECTION FRONT |
| 3APJ | EACH SECTION IN-LINE |
| 3APL | EACH SECTION REAR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD78) | Reply |
| C | BREAKS BEFORE MAKES |
| B | MAKES BEFORE BREAKS |
| D | MAKES BEFORE BREAKS, BREAKS BEFORE MAKES |
CTZFAREADOUT INDICATOR MARKING
AN INDICATION OF THE MARKING ON THE READOUT INDICATOR.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CTZF3ABUAN7)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABM | FIRST SECTION |
| 3ABN | SECOND SECTION |
| 3ABO | THIRD SECTION |
| 3ABP | FOURTH SECTION |
| 3ABQ | FIFTH SECTION |
| 3ABR | SIXTH SECTION |
| 3ABS | SEVENTH SECTION |
| 3ABT | EIGHTH SECTION |
| 3ABU | SINGLE SECTION |
| 3AEE | OVERALL |
| 3AFU | NINTH SECTION |
| 3AFV | TENTH SECTION |
| 3AFW | ELEVENTH SECTION |
| 3AFX | TWELFTH SECTION |
| 3AGK | EACH SECTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3DTNDVL0000*;HUES3DTNDVL0000$DYE0000*;HUES3DTNDVL0000$$DYE0000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DTH | FIRST BODY |
| 3DTI | FIRST INDICATOR BACKGROUND |
| 3DTJ | FIRST INDICATOR MARKING |
| 3DTK | SECOND BODY |
| 3DTL | SECOND INDICATOR BACKGROUND |
| 3DTM | SECOND INDICATOR MARKING |
| 3DTN | THIRD BODY |
| 3DTO | THIRD INDICATOR BACKGROUND |
| 3DTP | THIRD INDICATOR MARKING |
| 3DTQ | FOURTH BODY |
| 3DTR | FOURTH INDICATOR BACKGROUND |
| 3DTS | FOURTH LAMP |
| 3DTT | FIFTH BODY |
| 3DTU | FIFTH INDICATOR BACKGROUND |
| 3DTV | SIXTH BODY |
| 3DTW | SIXTH INDICATOR BACKGROUND |
| 3DTX | SEVENTH BODY |
| 3DTY | SEVENTH INDICATOR BACKGROUND |
| 3DTZ | EIGHTH BODY |
| 3DUA | EIGHTH INDICATOR BACKGROUND |
| 3DUB | NINTH BODY |
| 3DUC | NINTH INDICATOR BACKGROUND |
| 3DUD | TENTH BODY |
| 3DUE | TENTH INDICATOR BACKGROUND |
| 3DUF | ELEVENTH BODY |
| 3DUG | ELEVENTH INDICATOR BACKGROUND |
| 3DUH | SINGLE BODY |
| 3DUI | SINGLE INDICATOR BACKGROUND |
| 3DUJ | SINGLE INDICATOR MARKING |
| 3DUK | SINGLE LAMP |
| 3DUL | EACH BODY |
| 3DUM | EACH INDICATOR BACKGROUND |
| 3DUN | EACH INDICATOR MARKING |
| 3DUO | EACH LAMP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IGF | FOURTH INDICATOR MARKING |
| Table 2 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| NA0000 | NATURAL |
| RG0000 | ORANGE |
| RE0000 | RED |
| SL0000 | SILVER |
| VL0000 | VIOLET |
| WH0000 | WHITE |
| YE0000 | YELLOW |
IF STYLE/REPLY CODE(s) ADR WERE ENTERED FOR MRC CTZT, YOU MUST ANSWER MRC (STTB)
CTZT*DCONTACT ARRANGEMENT TRUTH TABLE
AN INDICATION OF THE CONFIGURATION OF THE CODED CONTACT SWITCHING STRUCTURE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CTZT3AFVDADH*;CTZT3AFVDADH$DABB*;CTZT3AFVDADH$$DABB*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABM | FIRST SECTION |
| 3ABN | SECOND SECTION |
| 3ABO | THIRD SECTION |
| 3ABP | FOURTH SECTION |
| 3ABQ | FIFTH SECTION |
| 3ABR | SIXTH SECTION |
| 3ABS | SEVENTH SECTION |
| 3ABT | EIGHTH SECTION |
| 3ABU | SINGLE SECTION |
| 3AEE | OVERALL |
| 3AFU | NINTH SECTION |
| 3AFV | TENTH SECTION |
| 3AFW | ELEVENTH SECTION |
| 3AFX | TWELFTH SECTION |
| 3AGK | EACH SECTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP70) | Reply |
| ADY | 0-1-3-3' CODE, 10 POSITIONS |
| ADZ | 1 PAIR 5 POSITIONS REPEATING NO OUTPUT ON 0 OR 5, 10 POSITIONS |
| AEM | 1, 2, 4, 5, 6, 7, 8, 9 CODE, 10 POSITIONS |
| AFE | 10'S COMPLEMENT BCD WITH COMPLEMENT, 1 POLE - 10 POSITIONS |
| AFF | 10'S COMPLEMENT BCD WITH COMPLEMENT, 2 POLE - 10 POSITIONS |
| AFG | 10'S COMPLEMENT BCD, 1 POLE - 10 POSITIONS |
| AEC | 1-1'-2-5 CODE MODIFIED, 1 POLE - 10 POSITIONS |
| AEB | 1-1-2-5 CODE PLUS COMPLEMENT WITH SEPARATE COMMON TO NOT-TRUE BITS, 10 POSITIONS |
| AEA | 11'25 CODE, 1 POLE - 10 POSITIONS |
| AEF | 1-2-2'-4 BERKELEY CODE, 1 POLE - 10 POSITIONS |
| AEE | 1-2-2-4 CODE WITH SEPARATE TO NOT-TRUE BITS, 10 POSITIONS |
| AEG | 1234 CODE, 1 POLE - 10 POSITIONS |
| AEH | 1242' CODE, 1 POLE - 10 POSITIONS |
| AEJ | 1242' WITH COMPLEMENT, 1 POLE - 10 POSITIONS |
| AFL | 1-2-4-4' BINARY CODED DECIMAL, 12 POSITIONS |
| AEK | 1-2-4-4 CODE WITH COMPLEMENT, 11 POSITIONS |
| AEL | 1-2-4-5 CODE, 10 POSITIONS |
| AEN | 1-2-4-7 CODE WITH EVEN BIT PARITY, 10 POSITIONS |
| AEP | 1-2-4-7 CODE, 11 AT 0, WITH EVEN BIT PARITY, 10 POSITIONS |
| AEQ | 2 OF 6 CODES, 11 POSITIONS |
| AER | 2 OUT OF 5 LINE CODE, 2 POLE - 10 POSITIONS |
| AEU | 2 POLE - 2 THROW, 2 COMMONS, 10 POSITIONS |
| AEV | 2 POLE - 5 POSITIONS REPEATING |
| AES | 2 POLE CHANGEOVER SWITCH, 10 POSITIONS |
| AFM | 2 POLE, 1-1'-2-5 WITH COMPLEMENT |
| AET | 2 POLE, DOUBLE THROW REPEATING, 10 POSITIONS |
| AEW | 3 POLE SINGLE POLE DECIMAL, 10 POSITIONS |
| AEX | 5 LINE TELETYPE WITH EVEN BIT PARITY, 1 POLE - 1O POSITIONS |
| AEY | 5 LINE TELETYPE, 1 POLE - 10 POSITIONS |
| AEZ | 7 BAR DISPLAY, SINGLE POLE, 10 POSITIONS |
| AFA | 7 SEGMENT CODE, 10 POSITIONS |
| AFB | 9'S COMPLEMENT BCD WITH COMPLEMENT, 1 POLE - 10 POSITIONS |
| AFC | 9'S COMPLEMENT BCD WITH COMPLEMENT, 2 POLE - 10 POSITIONS |
| AFD | 9'S COMPLEMENT BCD, 1 POLE - 10 POSITIONS |
| AAB | AIKEN POSITIVE PLUS COMPLEMENT, 10 POSITIONS |
| AAC | AIKEN POSITIVE, 10 POSITIONS |
| AAD | BALANCE CODE, 10 POSITIONS |
| ABT | BCD 10 AT 0, WITH ODD BIT PARITY, 1 POLE - 10 POSITIONS |
| ABS | BCD 10 AT 0, WITH ODD BIT PARITY, MOD. 1 POLE - 10 POSITIONS |
| ABR | BCD 9'S COMPLEMENT, 2 POLE - 10 POSITIONS |
| AAE | BCD AND DECIMAL, 2 POLE - 10 POSITIONS |
| AAF | BCD BINARY 10 TO 0, 1 POLE - 10 POSITIONS |
| AAG | BCD COMPLEMENT ONLY AND DECIMAL, 1 POLE - 10 POSITIONS |
| AAJ | BCD COMPLEMENT ONLY, 1 POLE - 10 POSITIONS |
| AAH | BCD COMPLEMENT ONLY, 1 POLE - 8 POSITIONS |
| AAK | BCD COMPLEMENT WITH EVEN BIT PARITY, 1 POLE - 10 POSITIONS |
| AAL | BCD COMPLEMENT WITH ODD BIT PARITY, 1 POLE - 10 POSITIONS |
| AAM | BCD DUAL, 2 POLE - 10 POSITIONS |
| AAN | BCD EXCESS 3 WITH COMPLEMENT, 1 POLE - 10 POSITIONS |
| AAP | BCD EXCESS 3 WITH COMPLEMENT, 2 POLE - 10 POSITIONS |
| AAQ | BCD EXCESS 3, 1 POLE - 10 POSITIONS |
| AAR | BCD EXCESS 6 AND COMPLEMENT, 10 POSITIONS |
| ABL | BCD WITH 0 BIT, 10 POSITIONS |
| ABM | BCD WITH 0 BIT, 12 POSITIONS |
| ABK | BCD WITH 0 BIT, 7 POSITIONS |
| AAV | BCD WITH COMPLEMENT AND DECIMAL, 1 POLE - 10 POSITIONS |
| AAW | BCD WITH COMPLEMENT BINARY 10 TO 1, 1 POLE - 10 POSITIONS |
| AAY | BCD WITH COMPLEMENT, 1 POLE - 10 POSITIONS |
| AAZ | BCD WITH COMPLEMENT, 1 POLE - 16 POSITIONS |
| AAX | BCD WITH COMPLEMENT, 1 POLE - 8 POSITIONS |
| ABD | BCD WITH COMPLEMENT, 11 POSITIONS |
| ABB | BCD WITH COMPLEMENT, 2 POLE - 10 POSITIONS |
| ABA | BCD WITH COMPLEMENT, 2 POLE - 8 POSITIONS |
| ABC | BCD WITH COMPLEMENT, 3 POLE - 8 POSITIONS |
| ABE | BCD WITH EVEN BIT PARITY, 1 POLE - 10 POSITIONS |
| ABF | BCD WITH ODD BIT PARITY, 1 POLE - 10 POSITIONS |
| ABG | BCD WITH ODD BIT PARITY, 8 POSITIONS |
| ABH | BCD WITH SEPARATE COMMON TO NOT-TRUE BITS, 2 POLE - 12 POSITIONS |
| ABJ | BCD WITH SPECIAL R POSITION, 10 POSITIONS |
| ABP | BCD, 1 POLE - 10 POSITIONS |
| ABQ | BCD, 1 POLE - 16 POSITIONS |
| ABN | BCD, 1 POLE - 8 POSITIONS |
| AAU | BCD, SEPARATE COMMON TO NOT-TRUE BITS, 2 POLE - 10 POSITIONS |
| AAT | BCD, SEPARATE COMMON TO NOT-TRUE BITS, 2 POLE - 8 POSITIONS |
| ABU | BERKELEY CODE 1-2-2'4 PLUS COMPLEMENT, 1 COMMON - 10 POSITIONS |
| ABW | BINARY CODE WITH COMPLEMENT, 1 POLE - 12 POSITIONS |
| ABX | BINARY CODE WITH COMPLEMENT, 2 POLE - 12 POSITIONS |
| ABY | BINARY CODE WITH COMPLEMENT, 2 POLE - 16 POSITIONS WITH 2 COMMONS |
| AFK | BINARY CODE WITH COMPLEMENT, POSITION 11 OPEN, 1 POLE - 12 POSITIONS |
| ABZ | BINARY CODE, 1 POLE - 12 POSITIONS |
| ACA | BINARY CODED DECIMAL PLUS COMPLEMENT WITH OFF POSITION, 12 POSITIONS |
| ACB | BINARY CODED WITH PARITY, 11 POSITIONS |
| ACC | BINARY CODED, 11 POSITIONS |
| ACD | BINARY COMPLEMENT ONLY, 1 POLE - 16 POSITIONS |
| ACE | BINARY WITH COMMON NOT-TRUE BITS, 2 POLE - 16 POSITIONS |
| ACF | BIQUINARY, 1 POLE - 10 POSITIONS |
| ACG | BIQUINARY, 2 POLE - 10 POSITIONS |
| ACH | CAPACITANCE DECADE, 0.001 TO 0.009 UF IN 0.001 UF STEPS |
| ACJ | CAPACITANCE DECADE, 0.01 TO 0.9 UF IN 0.01 UF STEPS |
| ACK | CAPACITANCE DECADE, 0.1 TO 0.9 UF IN 0.1 UF STEPS |
| ACL | CAPACITANCE DECADE, 1 TO 9 UF RANGE IN 1 UF STEPS |
| ACM | CAPACITANCE DECADE, 10 TO 90 UF RANGE IN 10 UF STEPS |
| ACN | COMPLEMENT CODE, 10 POSITIONS |
| ACP | COMPLEMENT OF 9'S COMPLEMENT, 1 POLE - 10 POSITIONS |
| ACR | DECIMAL, 1 POLE - 10 POSITIONS |
| ACS | DECIMAL, 1 POLE - 11 POSITIONS |
| ACT | DECIMAL, 1 POLE - 12 POSITIONS |
| ACU | DECIMAL, 1 POLE - 16 POSITIONS |
| ACQ | DECIMAL, 1 POLE - 8 POSITIONS |
| ACX | DECIMAL, 2 POLE - 10 POSITIONS |
| ACY | DECIMAL, 2 POLE - 12 POSITIONS |
| ACV | DECIMAL, 2 POLE - 5 POSITIONS |
| ACW | DECIMAL, 2 POLE - 8 POSITIONS |
| ACZ | GRAY CODE PLUS COMPLEMENT, 10 POSITIONS |
| ADA | JOHNSON CODE, 10 POSITIONS |
| ADB | MODIFIED 1242' CODE, 1 POLE - 10 POSITIONS |
| ADC | MODIFIED 1242' WITH COMPLEMENT, 1 POLE - 10 POSITIONS |
| ADD | MODIFIED 5-BIT TELETYPE, 10 POSITIONS |
| ADE | NOT/NOR SWITCH, ALL POSITIONS SHORTED EXCEPT POSITION INDICATED ON DIAL, 1 POLE - 12 POSITIONS |
| ADF | RESISTANCE DECADE, 0 TO 9 KILOHM RANGE IN 1 KILOHM STEPS |
| ADG | RESISTANCE DECADE, 0 TO 9 MEGOHM RANGE IN 1 MEGOHM STEPS |
| ADH | RESISTANCE DECADE, 0 TO 9 OHM RANGE IN 1 OHM STEPS |
| ADJ | RESISTANCE DECADE, 0 TO 90 KILOHM RANGE IN 10 KILOHM STEPS |
| ADK | RESISTANCE DECADE, 0 TO 90 OHM RANGE IN 10 OHM STEPS |
| ADL | RESISTANCE DECADE, 0 TO 900 KILOHM RANGE IN 100 KILOHM STEPS |
| ADM | RESISTANCE DECADE, 0 TO 900 OHM RANGE IN 100 OHM STEPS |
| ADN | REVERSE BCD 10 AT 0, WITH EVEN BIT PARITY, 1 POLE - 10 POSITIONS |
| ADP | SINGLE POLE CHANGEOVER SWITCH, 10 POSITIONS |
| ADQ | SINGLE POLE, SINGLE THROW, DECIMAL, ALL POSITIONS SHORTED BUT ONE, 10 POSITIONS |
| ADR | SPECIAL |
| ADU | SPECIAL 4 POLE BCD WITH COMPLEMENT, 10 POSITIONS |
| ADS | SPECIAL, 2 POLE - 2 POSITIONS |
| ADT | SPECIAL, 3 POLE - 10 POSITIONS |
| ADV | VOLTAGE DIVIDER, EECO |
| ADW | VOLTAGE DIVIDER, KELVIN VARLEY |
| ADX | VOLTAGE DIVIDER, WOLFF-POGGENDORF |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
CQMKBCONTACT VOLTAGE RATING IN VOLTS
THE VOLTAGE FOR WHICH THE CONTACTS ARE RATED,EXPRESSED IN VOLTS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQMK3ARPB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ARP | AC AT SEA LEVEL |
| 3ARQ | AC AT ALTITUDE |
| 3ARR | DC AT SEA LEVEL |
| 3ARS | DC AT ALTITUDE |
| 3ART | HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| 3ARV | LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| 3ARX | HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| 3ARZ | LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CTHFJCONTACT LOAD CURRENT RATING
THE AMOUNT OF CURRENT THAT THE CONTACTS ARE RATED TO MAKE OR BREAK WITH A SPECIFIED LOAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTHF3ARQJLAE2.0*;CTHF3ARQJLAE2.0$JLAE2.0*;CTHF3ARQJLAE2.0$$JLAE2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ARP | AC AT SEA LEVEL |
| 3ARQ | AC AT ALTITUDE |
| 3ARR | DC AT SEA LEVEL |
| 3ARS | DC AT ALTITUDE |
| 3ART | HIGHEST AC VOLTAGE RATING AT SEA LEVEL |
| 3ARV | LOWEST AC VOLTAGE RATING AT SEA LEVEL |
| 3ARX | HIGHEST DC VOLTAGE RATING AT SEA LEVEL |
| 3ARZ | LOWEST DC VOLTAGE RATING AT SEA LEVEL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN86) | Reply |
| AM | AMPERES |
| UA | MICROAMPERES |
| LA | MILLIAMPERES |
| Table 3 |
| Reply Code (AD92) | Reply |
| C | INDUCTIVE LOAD |
| D | LAMP LOAD |
| E | MOTOR LOAD |
| B | RESISTIVE LOAD |
AYDWDACTUATOR TYPE
INDICATES THE TYPE OF ACTUATOR PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AYDW3AMADACR*;AYDW3AMADACR$DACS*;AYDW3AMADACR$$DACS*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ALX | FIRST ACTUATOR |
| 3ALY | SECOND ACTUATOR |
| 3ALZ | THIRD ACTUATOR |
| 3AMA | FOURTH ACTUATOR |
| 3AMJ | SINGLE ACTUATOR |
| 3AMK | ALL ACTUATORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC58) | Reply |
| ACQ | DOUBLE PUSH BUTTON |
| ABK | LEVER |
| ABQ | PUSH BUTTON |
| ACR | THUMBWHEEL |
| ACS | TOGGLE |
CRJHASWITCH ACTUATOR INDEXING POSITION QUANTITY
THE NUMBER OF POSITIONS TO WHICH THE SWITCH ACTUATOR MAY BE INDEXED.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(CRJH3AMEA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ALX | FIRST ACTUATOR |
| 3ALY | SECOND ACTUATOR |
| 3ALZ | THIRD ACTUATOR |
| 3AMA | FOURTH ACTUATOR |
| 3AMB | FIFTH ACTUATOR |
| 3AMC | SIXTH ACTUATOR |
| 3AMD | SEVENTH ACTUATOR |
| 3AME | EIGHTH ACTUATOR |
| 3AMF | NINTH ACTUATOR |
| 3AMG | TENTH ACTUATOR |
| 3AMH | ELEVENTH ACTUATOR |
| 3AMI | TWELFTH ACTUATOR |
| 3AMJ | SINGLE ACTUATOR |
| 3AMK | ALL ACTUATORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CRSJ*DSHAFT TYPE
INDICATES THE TYPE OF SHAFT INCLUDED ON THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CRSJ3AEEDCW*;CRSJ3AEEDCW$DEA*;CRSJ3AEEDCW$$DEA*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AMJ | SINGLE ACTUATOR |
| 3AMK | ALL ACTUATORS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF58) | Reply |
| FA | RECTANGULAR/SQUARE, THREADED HOLE |
| BM | ROUND |
| DR | ROUND W/THROUGH HOLE |
| CP | ROUND, BREAKOFF |
| CQ | ROUND, CROSS SLOTTED |
| CR | ROUND, FLAT, UNDERCUT |
| BZ | ROUND, FLATTED |
| DZ | ROUND, FLATTED W/THROUGH HOLE |
| CS | ROUND, FLATTED, THREADED HOLE |
| CT | ROUND, FLUTED |
| CW | ROUND, FLUTED, THREADED HOLE |
| CX | ROUND, HOLLOWED |
| CY | ROUND, HOLLOWED, FLATTED |
| CZ | ROUND, HOLLOWED, SLOTTED |
| DY | ROUND, KNURLED |
| DA | ROUND, MILLED, SPRING SLIT |
| DB | ROUND, NONPARALLEL FLATTED |
| DC | ROUND, PARALLEL FLATTED |
| DD | ROUND, PARALLEL FLATTED, THREADED HOLE |
| DE | ROUND, SLOTTED |
| EA | ROUND, SLOTTED, FLAT UNDERCUT |
| DF | ROUND, SLOTTED, FLATTED |
| EB | ROUND, SLOTTED, KNURLED |
| DG | ROUND, SLOTTED, PARALLEL FLATTED |
| DN | ROUND, SLOTTED, UNDERCUT |
| DH | ROUND, SQUARE |
| EC | ROUND, SQUARE, CHANNELLED |
| ED | ROUND, SQUARE, SLOTTED |
| DJ | ROUND, SQUARE, THREADED HOLE |
| DW | ROUND, THREADED |
| EL | ROUND, THREADED HOLE |
| EM | ROUND, TRIPLE FLAT |
| EN | ROUND, TRIPLE FLAT, THREADED HOLE |
| DM | ROUND, UNDERCUT |
| EE | ROUND, V CHANNELLED |
| DK | ROUND, V FLATTED |
ABNB*JFIRST FLAT LENGTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNB3AMJJAB2.0*;ABNB3AMJJAB2.0$JAB2.0*;ABNB3AMJJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AMJ | SINGLE ACTUATOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABNC*JFLAT HEIGHT
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNC3AMJJAC2.0*;ABNC3AMJJAC2.0$JAC2.0*;ABNC3AMJJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AMJ | SINGLE ACTUATOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABWV*JSHAFT DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A SHAFT,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABWV3AMJJAC2.0*;ABWV3AMJJAC2.0$JAC2.0*;ABWV3AMJJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AMJ | SINGLE ACTUATOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABXF*JSHAFT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SHAFT,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABXF3AMJJAB2.0*;ABXF3AMJJAB2.0$JAB2.0*;ABXF3AMJJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AMJ | SINGLE ACTUATOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CSCFDTERMINAL TYPE
INDICATES THE TYPE OF TERMINAL FOR PROVIDING ELECTRICAL CONNECTION TO THE ITEM.
Enter the applicable reply code from the table below
(CSCFDACB*;CSCFDACN$$DABB*)
| Table 1 |
| Reply Code (AN89) | Reply |
| ADB | CLIP |
| ACT | COMPONENT SOCKET |
| ACN | CONNECTOR, PLUG |
| AAF | CONNECTOR, RECEPTACLE |
| AJT | ELECTRON TUBE BASE |
| AAM | PIN |
| ACR | PRINTED CIRCUIT |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| ABQ | SCREW |
| AAS | SOLDER STUD |
| ABX | TAB W/SCREW |
| ABB | TAB, SOLDER LUG |
| ABD | THREADED STUD |
| ACB | TURRET |
| ACM | WIRE HOOK |
| ACC | WIRE LEAD |
| ACD | WIRE LOOP |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AEBV)
IF STYLE/REPLY CODE(s) ABY WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (ABTD)
IF STYLE/REPLY CODE(s) AET, AFA OR AJZ WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AASA)
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AXGY3ATADADC*;AXGY3ATADADC$DABY*;AXGY3ATADADC$$DABY*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATA | SECOND MOUNTING FACILITY |
| 3ATB | THIRD MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AM39) | Reply |
| ABB | BASE |
| ABC | BRACKET(S) |
| ACR | FLANGE |
| ADC | PRESS FIT |
| AEZ | PRINTED CIRCUIT |
| ABY | SLOT |
| AJR | STRUT |
| ACD | TERMINAL |
| AFA | THREADED BUSHING |
| AJZ | THREADED BUSHING WITH PANEL SEAL |
| AHF | THREADED HOLE(S) |
| AET | THREADED STUD(S) |
| ACQ | UNTHREADED HOLE(S) |
AEBV*JUNTHREADED MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN UNTHREADED MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBV3ASZJAC2.0*;AEBV3ASZJAC2.0$JAC2.0*;AEBV3ASZJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATA | SECOND MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTD*JMOUNTING SLOT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING SLOT,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTD3ATDJAA2.0*;ABTD3ATDJAA2.0$JAA2.0*;ABTD3ATDJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR) or (CQJX) or (CQJX)
IF STYLE/REPLY CODE(s) NC OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD)
IF STYLE/REPLY CODE(s) JC, JE, JF, NE, NF OR NJ WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD)
IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP) or (CQJX and CQQR)
IF STYLE/REPLY CODE(s) NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD) or (CQJX and CMLP)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3ATDDSM*;THSD3ATDDSM$DNC*;THSD3ATDDSM$$DNC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| SM | ISO M |
| SS | ISO S |
| UN | UN |
| NE | UNEF |
| NF | UNF |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| NJ | UNIFIED NATIONAL JOINT (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| NM | UNM |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3ATDJA2.0*;CQJX3ATDJA2.0$JA2.0*;CQJX3ATDJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3ASZAK6)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3ATDAT3)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3AEEB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASA3AEEJAC2.0*;AASA3AEEJAC2.0$JAC2.0*;AASA3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQYJ*DMOUNTING FACILITY PATTERN
THE GENERAL CONFIGURATION AND RELATIVE POSITION OF THE FACILITIES PROVIDED FOR MOUNTING THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CQYJ3ATADBP*;CQYJ3ATADBP$DCG*;CQYJ3ATADBP$$DCG*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATA | SECOND MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD96) | Reply |
| CA | EIGHT POSITION CIRCULAR |
| BW | EIGHT POSITION RECTANGULAR |
| BY | FOUR POSITION CIRCULAR |
| BS | FOUR POSITION DIAMOND |
| BN | FOUR POSITION IN-LINE |
| CD | FOUR POSITION PARALLELOGRAM |
| BP | FOUR POSITION RECTANGULAR |
| CE | FOUR POSITION TRAPEZOID |
| BT | ISOSCELES TRIANGLE |
| CF | OBTUSE TRIANGLE |
| BZ | SIX POSITION CIRCULAR |
| CG | SIX POSITION PARALLELOGRAM |
| BR | SIX POSITION RECTANGULAR |
| BX | THREE POSITION CIRCULAR |
| BM | THREE POSITION IN-LINE |
| BQ | TWO POSITION DIAGONAL |
| BL | TWO POSITION IN-LINE |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
AEJN*JDISTANCE BETWEEN MOUNTING FACILITY CENTERS
THE DISTANCE BETWEEN MOUNTING FACILITY CENTERS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJN3ATDJAB2.0*;AEJN3ATDJAB2.0$JAB2.0*;AEJN3ATDJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDS*JLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS
THE LONGEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE HORIZONTAL PLANE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDS3ATAJAB2.0*;AFDS3ATAJAB2.0$JAB2.0*;AFDS3ATAJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATA | SECOND MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDT*JSHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS
THE SHORTEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE HORIZONTAL PLANE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDT3ATDJAC2.0*;AFDT3ATDJAC2.0$JAC2.0*;AFDT3ATDJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDU*JINTERMEDIATE HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS
THE INTERMEDIATE DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE HORIZONTAL PLANE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDU3ATDJAB2.0*;AFDU3ATDJAB2.0$JAB2.0*;AFDU3ATDJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDV*JLONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS
THE LONGEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE VERTICAL PLANE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDV3ATAJAA2.0*;AFDV3ATAJAA2.0$JAA2.0*;AFDV3ATAJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ASZ | FIRST MOUNTING FACILITY |
| 3ATA | SECOND MOUNTING FACILITY |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDW*JSHORTEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS
THE SHORTEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE VERTICAL PLANE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDW3AEEJAB2.0*;AFDW3AEEJAB2.0$JAB2.0*;AFDW3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3ATD | SINGLE MOUNTING FACILITY |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCMA*;CBBLDCLX$$DANG*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AND | ACTUATOR KNOB |
| BDR | ARC QUENCHING |
| CLW | CAM ACTUATED |
| CLX | DUMMY CONTACT |
| CLY | DUMMY SECTION |
| CLZ | DUMMY TERMINAL |
| CMA | ILLUMINATED |
| CMB | LEGEND PLATE |
| CMC | METALLIC INCLOSURE |
| CMD | PULL TO TURN |
| CME | PUSH TO TURN |
| AGQ | RFI SHIELDING |
| CMF | SHAFT COUPLER |
| CMG | SHAFT THROUGH PIN |
| CMH | SPRING RETURN |
| ANF | VARIABLE RESISTOR |
| ANG | VARIABLE RESISTOR PROVISIONS |
| BPW | W/GEAR |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ABFE*DHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDEA*;ABFEDEG$$DCN*)
| Table 1 |
| Reply Code (AB27) | Reply |
| ED | CORROSION PROOF |
| DJ | CORROSION RESISTANT |
| CG | DRIPPROOF |
| FS | DRIPTIGHT |
| EF | DUST RESISTANT |
| CF | DUSTPROOF |
| DY | DUSTTIGHT |
| CE | EXPLOSION PROOF |
| FQ | EXPLOSION RESISTANT |
| DK | FUNGUS PROOF |
| CH | FUNGUS RESISTANT |
| EB | HERMETICALLY SEALED |
| GE | HUMIDITY RESISTANT |
| DV | MOISTURE PROOF |
| BR | MOISTURE RESISTANT |
| DW | OIL RESISTANT |
| CJ | OILTIGHT |
| CK | RAINPROOF |
| EM | RAINTIGHT |
| GC | SALT SPRAY PROOF |
| FZ | SALT SPRAY RESISTANT |
| DT | SALT WATER RESISTANT |
| FY | SAND PROOF |
| EN | SANDTIGHT |
| EJ | SHOCK PROOF |
| EP | SHOCK RESISTANT |
| BT | SPLASHPROOF |
| CL | SPRAYTIGHT |
| FM | VIBRATION PROOF |
| GB | VIBRATION RESISTANT |
| EA | WATER RESISTANT |
| CM | WATERPROOF |
| CN | WATERTIGHT |
| EG | WEATHER RESISTANT |
| DX | WEATHERPROOF |
| GG | WEATHERTIGHT |
AFGA*JOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDIRA000*;PRMTDPDA000$DAZA000*;PRMTDPDA000$$DAZA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPTA000E2.0*;PMWTJPTA000E2.0$JPTA000E2.0*;PMWTJPTA000E2.0$$JPTA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| C | CARAT |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAUA0002.0*;PMLCJAUA0002.0$JAUA0002.0*;PMLCJAUA0002.0$$JAUA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CN | CUBIC INCHES |
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
This MRC replaced MRC CTZZ
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
STTB*ASPECIAL TRUTH TABLE IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF THE SPECIAL CODED CONTACT SWITCHING STRUCTURE.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document as in the first example.If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and then the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document as in the second example.
(STTBJ01963-SP35*; STTB1XJ19133-SPECIAL 0-1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABM | FIRST SECTION |
| 3ABN | SECOND SECTION |
| 3ABO | THIRD SECTION |
| 3ABP | FOURTH SECTION |
| 3ABQ | FIFTH SECTION |
| 3ABR | SIXTH SECTION |
| 3ABS | SEVENTH SECTION |
| 3ABT | EIGHTH SECTION |
| 3ABU | SINGLE SECTION |
| 3AEE | OVERALL |
| 3AFU | NINTH SECTION |
| 3AFV | TENTH SECTION |
| 3AFW | ELEVENTH SECTION |
| 3AFX | TWELFTH SECTION |
| 3AGK | EACH SECTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)