Two or more diode semiconductor devices designed to function as a unit in changing alternating current to direct current. The diode devices are internally connected in series, and are permanently cased, encapsulated, potted, or molded together to form an inseparable unit. These units may be designed as either half-wave or full-wave rectifiers and may be mounted to form either single phase or three phase bridges. For interconnected items arranged in stack(s), see RECTIFIER, SEMICONDUCTOR DEVICE. For items fabricated in the form of a monolithic or thin film structure that perform the function of a circuit, see INTEGRATED CIRCUIT (as modified). Excludes:SEMICONDUCTOR DEVICES, UNITIZED; SEMICONDUCTOR DEVICE ASSEMBLY; and RECTIFIER NETWORK, UNITIZED.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED62108*)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFNY*;CBBLDFNY$$DFNY*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FNY | ROHS DIRECTIVE COMPLIANCE |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDGAE000*;MATTDMTH000$DSLB000*;MATTDMTH000$$DSLB000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| CDB000 | CADMIUM SELENIDE |
| CDC000 | CADMIUM SULFIDE |
| GAA000 | GALLIUM ANTIMONIDE |
| GAB000 | GALLIUM ARSENIDE |
| GAC000 | GALLIUM ARSENIDE PHOSPHIDE |
| GAD000 | GALLIUM ARSENIDE SULFIDE |
| GAE000 | GALLIUM INDIUM ARSENIC PHOSPHIDE |
| GAF000 | GALLIUM PHOSPHIDE |
| MTT000 | GERMANIUM |
| MTW000 | INDIUM ANTIMONIDE |
| MTX000 | INDIUM ARSENIDE |
| MTY000 | INDIUM PHOSPHIDE |
| PBC000 | LEAD SELENIDE |
| PBD000 | LEAD SULFIDE |
| PBE000 | LEAD TANTALATE |
| MTZ000 | LITHIUM TANTALATE |
| MTH000 | SELENIUM |
| SLC000 | SILICON |
| SLA000 | SILICON ALLOY |
| SLB000 | SILICON CARBIDE |
| ZNC000 | ZINC SULFIDE |
ALAWJABSOLUTE MAXIMUM VOLTAGE RATING IN VOLTS PER CHARACTERISTIC
THE MAXIMUM LIMITING VALUE OF THE VOLTAGE THAT MAY BE APPLIED AND THE SYMBOL USED TO IDENTIFY THE SPECIFIC ELECTRICAL CHARACTERISTIC,EXPRESSED IN VOLTS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALAWJDM2.0*;ALAWJDM2.0$$JDM2.1*)
| Table 1 |
| Reply Code (AH15) | Reply |
| CT | BREAKDOWN VOLTAGE, DC |
| CW | BREAKDOWN VOLTAGE, INSTANTANEOUS |
| DF | BREAKOVER VOLTAGE, DC |
| DG | BREAKOVER VOLTAGE, INSTANTANEOUS |
| CX | FORWARD VOLTAGE, AVERAGE |
| CY | FORWARD VOLTAGE, PEAK |
| CZ | FORWARD VOLTAGE, TOTAL RMS |
| ET | NOMINAL REGULATOR VOLTAGE |
| DQ | NONREPETITIVE PEAK OFF-STATE VOLTAGE |
| DD | NONREPETITIVE PEAK REVERSE VOLTAGE |
| BF | NONREPETITIVE PEAK REVERSE VOLTAGE, MAXIMUM PEAK TOTAL VALUE |
| DK | OFF-STATE VOLTAGE, DC |
| DL | OFF-STATE VOLTAGE, INSTANTANEOUS |
| DM | OFF-STATE VOLTAGE, PEAK |
| DN | OFF-STATE VOLTAGE, RMS TOTAL |
| GH | PEAK INVERSE VOLTAGE |
| DP | REPETITIVE PEAK OFF-STATE VOLTAGE |
| DC | REPETITIVE PEAK REVERSE VOLTAGE |
| BG | REPETITIVE PEAK REVERSE VOLTAGE, MAXIMUM PEAK TOTAL VALUE |
| DH | REVERSE BREAKDOWN VOLTAGE, DC |
| DJ | REVERSE BREAKDOWN VOLTAGE, INSTANTANEOUS |
| DA | REVERSE VOLTAGE, AVERAGE |
| BE | REVERSE VOLTAGE, DC |
| EC | REVERSE VOLTAGE, INSTANTANEOUS |
| ED | REVERSE VOLTAGE, PEAK |
| DB | REVERSE VOLTAGE, TOTAL RMS |
| CR | SOURCE SUPPLY VOLTAGE |
| CS | SOURCE TO SUBSTRATE VOLTAGE |
| DE | WORKING PEAK REVERSE VOLTAGE |
| BH | WORKING PEAK REVERSE VOLTAGE, MAXIMUM PEAK TOTAL VALUE |
ALAYJABSOLUTE MAXIMUM CURRENT RATING PER CHARACTERISTIC
THE LIMITING VALUE OF CURRENT THAT MAY FLOW AND THE SPECIFIC ELECTRICAL CHARACTERISTIC.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALAYJLAG2.0*;ALAYJLAG2.0$$JLAG2.1*)
| Table 1 |
| Reply Code (AC30) | Reply |
| A | AMPERES |
| U | MICROAMPERES |
| L | MILLIAMPERES |
| Table 2 |
| Reply Code (AH16) | Reply |
| CG | AVERAGE FORWARD CURRENT AVERAGED OVER A FULL 60-HZ CYCLE |
| CQ | BREAKOVER CURRENT, DC |
| CR | BREAKOVER CURRENT, INSTANTANEOUS |
| CC | FORWARD CURRENT, AVERAGE |
| AF | FORWARD CURRENT, DC |
| AG | FORWARD CURRENT, MAXIMUM PEAK TOTAL VALUE |
| AH | FORWARD CURRENT, NONREPETITIVE, MAXIMUM PEAK TOTAL VALUE |
| AJ | FORWARD CURRENT, REPETITIVE, MAXIMUM PEAK TOTAL VALUE |
| CD | FORWARD CURRENT, TOTAL RMS |
| AN | INFLECTION POINT CURRENT |
| CW | OFF-STATE CURRENT, DC |
| CX | OFF-STATE CURRENT, INSTANTANEOUS |
| CY | OFF-STATE CURRENT, PEAK |
| CZ | OFF-STATE CURRENT, RMS TOTAL |
| DQ | ON-STATE CURRENT, AVERAGE |
| DN | ON-STATE CURRENT, DC |
| DP | ON-STATE CURRENT, INSTANTANEOUS |
| DR | ON-STATE CURRENT, PEAK |
| DS | ON-STATE CURRENT, RMS TOTAL |
| CF | PEAK FORWARD SURGE CURRENT |
| DW | PEAK ON-STATE SURGE CURRENT |
| AP | PEAK POINT CURRENT |
| AQ | PEAK PULSE CURRENT |
| DA | PEAK REPETITIVE OFF-STATE CURRENT |
| CP | PEAK REVERSE SURGE CURRENT |
| CE | REPETITIVE PEAK FORWARD CURRENT |
| DT | REPETITIVE PEAK ON-STATE CURRENT |
| CN | REPETITIVE PEAK REVERSE CURRENT |
| CK | REVERSE CURRENT, AVERAGE |
| CH | REVERSE CURRENT, DC |
| CJ | REVERSE CURRENT, INSTANTANEOUS |
| CL | REVERSE CURRENT, PEAK |
| CM | REVERSE CURRENT, TOTAL RMS |
| BN | TOTAL POWER DISSIPATION |
| AR | VALLEY POINT CURRENT |
| AS | VOLTAGE REGULATOR DIODE CURRENT |
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDAKX*;AXGYDADC$$DABB*)
| Table 1 |
| Reply Code (AM39) | Reply |
| ABB | BASE |
| AAC | BOLT |
| ABC | BRACKET |
| ABD | BUSHING |
| ABH | CLAMP |
| AFL | CLIP |
| ACR | FLANGE |
| AGQ | FLUSH |
| ABP | PLUG-IN |
| AKX | PLUG-IN TERMINAL |
| ADC | PRESS FIT |
| BNZ | REMOVABLE CLIP |
| ABY | SLOT |
| ANF | SPRING CLIP |
| AEG | SURFACE |
| ACD | TERMINAL |
| AFA | THREADED BUSHING |
| AHF | THREADED HOLE |
| AET | THREADED STUD |
| ACQ | UNTHREADED HOLE |
TTQYJTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TTQYJAAL2*;TTQYJAAL2$$JAAL3*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AEP | CABLE W/CONNECTOR |
| AAK | INSULATED WIRE LEAD |
| AAL | INSULATED WIRE LEAD W/TERMINAL LUG |
| AAM | PIN |
| ACR | PRINTED CIRCUIT |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| AAT | STANDARD TUBE BASE |
| AFW | TAB |
| ABX | TAB W/SCREW |
| ABB | TAB, SOLDER LUG |
| AKC | TERMINAL LUG |
| ABC | THREADED HOLE |
| ABD | THREADED STUD |
| ACB | TURRET |
| ABF | UNINSULATED WIRE LEAD |
| ABG | UNINSULATED WIRE LEAD W/TERMINAL LUG |
| ACM | WIRE HOOK |
| ACC | WIRE LEAD |
AJURLCIRCUIT CONNECTION STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE CIRCUIT CONNECTION.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AJURLA10)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAA1450 | A1 | HALF-WAVE 1 PHASE |
| AAA1459 | A10 | INVERTED CENTER TAP 1 PHASE |
| AAA1460 | A11 | INVERTED CENTER TAP 1 PHASE |
| AAA1461 | A12 | OPEN BRIDGE 1 PHASE |
| AAA1462 | A13 | MAGNETIC AMPLIFIER OPEN BRIDGE 3 PHASE |
| AAA1451 | A2 | CENTER TAP 1 PHASE |
| AAA1452 | A3 | DOUBLER 1 PHASE |
| AAA1453 | A4 | TRIPLER 1 PHASE |
| AAA1454 | A5 | RING 1 PHASE |
| AAA1455 | A6 | HALF-WAVE 3 PHASE |
| AAA1456 | A7 | BRIDGE 1 PHASE |
| AAA1457 | A8 | BRIDGE 3 PHASE |
| AAA1458 | A9 | CENTER TAP 3 PHASE |
AFGA*JOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJFM32.0/P50.0*;AFGAJFM32.0/P50.0$$JF*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAZA0002.0*;PMLCJAZA0002.0$JAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information