FSC Information

1345	Land Mines

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

MRC AFJK has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED61704*)

MATTDMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable reply code from the table below

(MATTDSTA000*;MATTDSTA000$DSTA000*;MATTDSTA000$$DSTA000*)

Table 1
	Reply Code (MA01)	Reply
	STA000	STEEL

ABRY*JLENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABRYJAB2.0*;ABRYJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

HGTH*JHEIGHT

A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(HGTHJAC2.0*;HGTHJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABGL*JWIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABGLJAA2.0*;ABGLJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABHP*JOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	F	FEET
	A	INCHES
	M	METERS
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADAV*JOVERALL DIAMETER

A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABMK*JOVERALL WIDTH

AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKW*JOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABFY*JOVERALL DEPTH

AN OVERALL MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABFYJAA2.0*;ABFYJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BFRH*JOPENING LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF THE OPENING,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BFRHJAC2.0*;BFRHJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BFRJ*JADJUSTABLE LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION TO WHICH THE ITEM MAY BE ADJUSTED,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.

(BFRJJLM32.0/P50.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

BFRY*JPOCKET DEPTH

A MEASUREMENT BETWEEN SPECIFIED POINTS ON A POCKET,IN DISTINCTION FROM HEIGHT.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BFRYJA2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

AQYJ*AHANDLE QUANTITY

THE NUMBER OF HANDLES PROVIDED ON THE ITEM.

Enter the numeric reply with a minimum of one digit.

(AQYJA10*)

BBJW*DHANDLE LOCATION

INDICATES THE LOCATION OF THE HANDLE ON THE ITEM.

Enter the applicable reply code from the table below

(BBJWDAHH*;BBJWDBCX$DBEC*;BBJWDBCX$$DBEC*)

Table 1
	Reply Code (AJ91)	Reply
	BCS	AROUND CASE LENGTHWISE
	AAZ	BACK
	BEL	BACK SIDE
	BEJ	BAG TOP
	AHH	BOTH ENDS
	ABA	BOTTOM
	BDN	BOTTOM AND TOP
	CLB	BOTTOM END
	BCT	BOTTOM HALF
	DMY	BOTTOM HALF OF SIDES
	AZM	CASE
	BCZ	CASE CENTER
	AHP	CENTER
	BCW	CENTER FRONT OF BOTTOM SECTION
	BCX	CENTER FRONT SIDE
	BCY	CENTER LENGTHWISE
	AGW	COVER
	BDA	COVER CENTER
	AHM	EACH END
	BDT	EACH END AND EACH SIDE
	BDP	EACH END AND FRONT
	BDQ	EACH END AND TOP
	BDR	EACH END AND TOP COVER
	BDD	EACH END OF TOP HALF
	BDE	EACH END OF TOP SECTION
	BDS	EACH RECESSED END
	BDW	EACH SHORT SIDE AND EACH LONG SIDE
	ASB	EACH SIDE
	BDY	EACH SIDE AND COVER
	BDZ	EACH SIDE AND ONE END
	BDG	EACH SIDE OF TOP
	BDF	EACH SIDE SECURED TO COVER
	ABB	END
	BEA	END AND ONE SIDE
	BEB	END AND THREE SIDES
	BEM	FOUR SIDES
	ABC	FRONT
	BEP	FRONT AND BACK AND TWO SIDES
	BDH	FRONT AND REAR
	BDJ	FRONT EDGE
	ABT	FRONT END
	BEN	FRONT SIDE
	AKZ	HEAD
	BDK	HINGED REAR DOOR
	BDL	LEFT END
	AEG	LEFT HAND SIDE
	BEQ	LID
	BDB	LID CENTER
	BSC	LONG SIDE
	BDM	LOWER HALF
	ANB	OPPOSITE SIDES
	ABJ	REAR
	ACZ	SIDE
	BEF	SIDE NEAR TOP
	DMX	SIDES
	BED	SIDES OF BOTTOM SECTION
	ABD	TOP
	BEC	TOP AND TWO SIDES
	ADG	TOP AT EACH END
	AQK	TOP CENTER
	BEG	TOP CENTER LID
	BEH	TOP HALF
	DMZ	TOP HALF OF SIDES
	BEK	TOP SIDE
	BER	UPPER HALF

IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC AMDA, YOU MUST ANSWER MRC (AZAF)

AMDADLOCKING DEVICE

AN INDICATION OF WHETHER OR NOT A LOCKING DEVICE IS INCLUDED.

Enter the applicable reply code from the table below

(AMDADC)

Table 1
	Reply Code (AA49)	Reply
	B	INCLUDED
	C	NOT INCLUDED

AZAF*DLOCKING DEVICE TYPE

INDICATES THE TYPE OF DEVICE USED TO LOCK THE ITEM.

Enter the applicable reply code from the table below

(AZAFDGJ*;AZAFDCT$DKQ*)

Table 1
	Reply Code (AE36)	Reply
	GJ	INTEGRAL
	BP	INTEGRAL COMBINATION LOCK
	BQ	INTEGRAL KEY LOCK
	KQ	NON-INTEGRAL
	BR	SEPARATE
	CT	SEPARATE LOCK
	KP	SLIDE SPRING
	DY	TRUNK LATCH

AJJW*ACOMPONENT QUANTITY

THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.

Enter the numeric reply with a minimum of one digit.

(AJJWA10*)

AQHK*GCOMPONENT CONTROLLING AGENCY

THE NAME OF THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION THAT CONTROLS THE COMPONENT.

Enter clear text.

(AQHKGCLEARTEXT)

AQHL*GCOMPONENT NAME

THE NAME OF THE COMPONENT ASSIGNED BY THE CONTROLLING AGENCY.

Enter clear text.

(AQHLGCLEARTEXT)

AQHM*JCOMPONENT IDENTIFYING NUMBER

THE SPECIFIC NUMBER USED TO IDENTIFY THE COMPONENT.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(AQHMJAE2.0*;AQHMJAE2.0$$JAE2.1*)

Table 1
	Reply Code (AG99)	Reply
	AB	DRAWING NO.
	AC	MODEL NO.
	AD	PART NO.
	AE	SERIAL NO.
	AF	TYPE NO.

AAFS*DAPPLICATION DESIGN

THE PRIMARY APPLICATION FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(AAFSDGV*;AAFSDDT$$DFZ*)

Table 1
	Reply Code (AA25)	Reply
	CY	ALARM
	CZ	AMPLIFIER
	DA	ANALYZER TELEMETRIC DATA
	DD	CHANNEL SHIFTER
	DE	CODER
	DF	COLLIMATOR
	DG	COLLIMATOR SET
	DH	COMPARATOR
	DK	COMPUTER
	DL	CONTROL
	DM	CONVERTER
	DQ	COUNTERMEASURES SET
	DR	COUPLER
	DS	DECODER
	DT	DEMODULATOR
	DU	DEMULTIPLEXER
	DV	DETECTING SET
	DW	DETECTOR
	DX	DISCRIMINATOR
	DY	DISPLAY UNIT
	DZ	DRIVER
	EA	DUPLEXER
	EF	ELECTORNIC MARKER GENERATOR
	GY	ELECTRICAL FREQUENCY SYNTHESIZER
	EB	ELECTRICAL SYNCHRONIZER
	EC	ELECTRONIC EQUIPMENT INSTALLATION KIT
	ED	ELECTRONIC EQUIPMENT MODIFICATION KIT
	EE	ELECTRONIC EQUIPMENT PARTS KIT
	FH	ELECTRONIC EQUIPMENT PRESSURIZING SET
	EG	EQUALIZER
	EH	FACSIMILE
	EJ	FACSIMILE SET
	DN	FREQUENCY CONVERTER
	EK	FREQUENCY DIVIDER
	EL	FREQUENCY MULTIPLIER
	EM	IMPULSE NOISE GENERATOR
	EN	INDICATOR
	DC	INTEGRATING BLANKER
	EP	INTERCOMMUNICATION SET
	EQ	INTERCOMMUNICATION STATION
	ER	INTERFERENCE GENERATOR
	ES	INTERROGATOR
	ET	KEYBOARD
	EU	KEYER
	EV	LIMITER
	EW	LORAN SET
	EX	MIXER
	EY	MODULATOR
	EZ	MONITOR
	FA	MULTIPLEXER
	FB	OSCILLATOR
	FC	PERFORATOR
	FD	PERFORATOR SET
	FE	POWER DIVIDER
	FF	POWER SUPPLY
	FG	PREAMPLIFIER
	FJ	PROGRAMMER
	FK	PUBLIC ADDRESS SET
	FL	PULSE GENERATOR
	FM	PULSE-SWEEP GENERATOR
	FN	QUANTIZER
	FP	RADAR RECEIVER
	FQ	RADAR SET
	FR	RADAR SET GROUP
	FS	RADAR TRANSMITTER
	FT	RADIO BEACON SET
	FU	RADIO RECEIVER
	FV	RADIO RECEIVING BUOY
	FW	RADIO RECEIVING SET
	FX	RADIO REPEATER SET
	FY	RADIO SET
	FZ	RADIO SET CONTROL GROUP
	GA	RADIO TELETYPEWRITER SET
	GB	RADIO TRANSMITTING BUOY
	GC	RECEIVER
	GD	RECEIVER-TRANSMITTER
	GE	RECEIVER-TRANSMITTER SET
	GF	REPERFORATOR
	GG	REPERFORATOR SET
	DJ	SIGNAL COMPARATOR
	DP	SIGNAL CONVERTER
	GH	SIMULATOR
	GJ	SONAR COMMUNICATIONS SET
	GK	SONAR HYDROPHONE
	GL	SONAR PROJECTOR
	GM	SONAR RECEIVER
	GN	SONAR SOUNDING SET
	GP	SONAR TRANSDUCER
	GQ	SONOBUOY
	GR	SOUND RECORDER
	GS	SOUND RECORDER-REPRODUCER
	GT	SOUND REPRODUCER
	GU	SOUNDER
	GV	STABILIZATION DATA GENERATOR
	GW	SWEEP GENERATOR
	GX	SWITCHBOARD
	GZ	TELEGRAPH SET
	HA	TELEPRINTER
	HB	TELETYPEWRITER
	HC	TELEVISION CAMERA
	HD	TELEVISION SET
	HE	TRANSLATOR
	HF	TRANSMITTER
	HG	TRANSPONDER SET
	HH	TUNER
	HJ	TUNER ASSEMBLY
	HK	TUNING UNIT
	DB	VIDEO ANALYZER
	HL	VIDEO RECORDER
	HM	VIDEO RECORDER-REPRODUCER
	HN	VIDEO REPRODUCER

CBBL*DFEATURES PROVIDED

THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.

Enter the applicable reply code from the table below

(CBBLDCFE)

Table 1
	Reply Code (AN47)	Reply
	CFE	DEFLATED BY VACUUM

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ENAC*DENVIRONMENTAL ATTRIBUTE CODE

INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.

Enter the applicable reply code from the table below

(ENACDE2*;ENACDE3$$DEL*)

Table 1
	Reply Code (EN02)	Reply
	EL	COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - LAMINATED PAPERBOARD
	EK	COMPREHENSIVE PROCUREMENT GUIDELINE - CONSTRUCTION PRODUCTS - STRUCTURAL FIBERBOARD
	GX	COMPREHENSIVE PROCUREMENT GUIDELINE - MISCELLANEOUS PRODUCTS - INDUSTRIAL DRUMS
	E2	COMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - OFFICE WASTE RECEPTACLES
	E3	COMPREHENSIVE PROCUREMENT GUIDELINE - NON-PAPER OFFICE PRODUCTS - PLASTIC DESKTOP ACCESSORIES
	JK	COMPREHENSIVE PROCUREMENT GUIDELINE - PAPER AND PAPER PRODUCTS - PAPERBOARD AND PACKAGING PRODUCTS
	AW	DISPOSABLE CONTAINERS - BIOBASED
	NR	REVIEWED - DOES NOT MEET SOME ENAC CRITERIA