A variable speed drive consisting of one or more hydraulic motors and speed reducing gear assemblies integrally mounted and designed to convert hydraulic energy into output shaft torque.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED61630*)
AJJW*ACOMPONENT QUANTITY
THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJJWA10*)
AJJYADOCUMENT SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS THE DOCUMENT.
Enter the alpha-numeric reply with five character(s) exactly.
(AJJYAE8R8P)
AJJZDDOCUMENT TYPE
INDICATES THE TYPE OF DOCUMENT BY THE TITLE.
Enter the applicable reply code from the table below
(AJJZDCH)
| Table 1 |
| Reply Code (AF70) | Reply |
| BD | BILL OF MATERIAL |
| BE | CATALOG SHEET |
| CD | COMMERCIAL CATALOG |
| CH | DESIGN CONTROL DRAWING |
| AN | ENGINEERING DRAWING |
| BG | ENGINEERING PARTS LIST |
| AC | MILITARY SPECIFICATION |
| AF | MILITARY STANDARD |
| BT | PARTS LIST |
| FE | SOURCE CONTROL DRAWING |
| AB | TECHNICAL MANUAL |
AYDS*GEND ITEM NAME
THE APPROVED ITEM NAME OR PART NAME OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter clear text.
(AYDSGCLEARTEXT)
AJJX*DCOMPONENT DOCUMENT ORIGIN
THE ORIGINATOR /GOVERNMENTAL,INDUSTRIAL,OR OTHERWISE/ OF THE AVAILABLE DOCUMENT WHICH LISTS THE COMPONENT/S/ OF THE ITEM.
Enter the applicable reply code from the table below
(AJJXDAD)
| Table 1 |
| Reply Code (AF59) | Reply |
| AF | GOVERNMENT |
| AD | INDUSTRIAL |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
CYHY*AVEHICLE IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC VEHICLE.
Enter the alpha-numeric reply with a minimum of one character.
(CYHYAS0)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJLA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJLB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDSTB000*;MATTDALA000$DSTA000*;MATTDALA000$$DSTA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL5050 | ALUMINUM ALLOY 5050 |
| AL6061 | ALUMINUM ALLOY 6061 |
| ZSJ001 | ALUMINUM ALLOY 6061, TYPE 6 |
| FEA000 | IRON |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| ZRF000 | STEEL,ARMOR |
| STF000 | STEEL,CARBON |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
ARJA*JPRESSURE RATING
THE PRESSURE AT WHICH AN ITEM IS RATED TO OPERATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ARJAJV2.0*;ARJAJV2.0$JV2.0*;ARJAJV2.0$$JV2.1*)
| Table 1 |
| Reply Code (AB18) | Reply |
| F | BAR |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| V | POUNDS PER SQUARE INCH |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDAAA000*;SFTTDANA000$DPSA000*;SFTTDANA000$$DPSA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| XXG000 | BLACK OXIDE |
| CDA000 | CADMIUM |
| AAA001 | CARC (CHEMICAL AGENT RESISTANT COATING) |
| AAA000 | PAINTED |
| PSA000 | PASSIVATE |
| AAA004 | POWDER COATED |
| PRA000 | PRIMER |
| PRF000 | PRIMER EPOXY |
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDGR0094)
| Table 1 |
| Reply Code (AD06) | Reply |
| GR0000 | GREEN |
| GR0494 | GREEN, 383 |
| GR0094 | GREEN, FED STD 595, 24533 |
| GR0024 | GREEN, FOREST |
| LD0000 | OLIVE DRAB |
| TA0000 | TAN |
| TA0099 | TAN, 686A |
| TA0010 | TAN, DESERT |
CZNF*ACOLOR CHIP NUMBER
THE IDENTIFYING NUMBER FOR THE COLOR CHIP.
Enter the alpha-numeric reply with a minimum of one character.
(CZNFAY0)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDSX)
| Table 1 |
| Reply Code (AD05) | Reply |
| GJ | AGE HARDENING |
| GM | AGED |
| LY | AIR QUENCHED |
| BP | ANNEALED |
| CK | ANNEALED TO A NOMINAL GRAIN SIZE 0.015 |
| CL | ANNEALED TO A NOMINAL GRAIN SIZE 0.025 |
| CM | ANNEALED TO A NOMINAL GRAIN SIZE 0.035 |
| EF | ANNEALED TO A NOMINAL GRAIN SIZE 0.040 |
| CN | ANNEALED TO A NOMINAL GRAIN SIZE 0.050 |
| CP | ANNEALED TO A NOMINAL GRAIN SIZE 0.070 |
| CQ | ANNEALED TO A NOMINAL GRAIN SIZE 0.100 |
| FZ | ANNEALED TO A NOMINAL GRAIN SIZE 0.120 |
| HT | ARTIFICALLY AGED |
| MP | AS CAST |
| CS | AS FABRICATED |
| LZ | BOX ANNEALED |
| HE | BRAZED |
| QN | CARBURIZED |
| CZ | CASEHARDENED |
| DM | CH900 |
| CR | COLD DRAWN |
| BX | COLD DRAWN 1/2 HARD CONDITION |
| BW | COLD DRAWN 1/4 HARD CONDITION |
| BV | COLD DRAWN 1/8 HARD CONDITION |
| BY | COLD DRAWN 3/4 HARD CONDITION |
| BZ | COLD DRAWN FULL HARD CONDITION |
| HF | COLD DRAWN STRESS RELIEVED |
| HG | COLD DRAWN UNANNEALED |
| HW | COLD DRAWN, SOLUTION TREATED |
| HX | COLD DRAWN, SPRING TEMPER |
| HS | COLD FINISH |
| MR | COLD FORGED |
| CX | COLD ROLLED |
| LQ | COLD ROLLED 1/2 HARD TEMPER |
| DA | COLD WORKED |
| SW | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H21 |
| SX | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H22 |
| SY | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H23 |
| SZ | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H24 |
| TA | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H25 |
| SF | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H31 |
| SG | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H32 |
| SH | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H33 |
| SJ | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H34 |
| SK | COLD WORKED FOLLOWED BY HEAT TREATMENT PARTIAL ANNEALING H35 |
| SL | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H21 |
| SM | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H22 |
| SN | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H23 |
| SP | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H24 |
| SQ | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H25 |
| SR | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H31 |
| SS | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H32 |
| ST | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H33 |
| SU | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H34 |
| SV | COLD WORKED FOLLOWED BY STRESS RELIEF TREATMENT H35 |
| TD | COLD WORKED H10 |
| TE | COLD WORKED H11 |
| TF | COLD WORKED H12 |
| TG | COLD WORKED H13 |
| TH | COLD WORKED H14 |
| GW | COLD WORKED HIGH TENSILE |
| HY | COLD WORKED, SOLUTION TREATED |
| GN | COLD-HEADING |
| MS | CONDITION 0 |
| MT | CONDITION F |
| ED | CONDITION T |
| MX | CONDITION T 1 |
| MY | CONDITION T 3 |
| MZ | CONDITION T 351 |
| NA | CONDITION T 3510 |
| NB | CONDITION T 3511 |
| NC | CONDITION T 352 |
| ND | CONDITION T 36 |
| NE | CONDITION T 4 |
| NF | CONDITION T 41 |
| NG | CONDITION T 411 |
| NH | CONDITION T 42 |
| NJ | CONDITION T 451 |
| NK | CONDITION T 46 |
| NL | CONDITION T 5 |
| NM | CONDITION T 6 |
| NN | CONDITION T 611 |
| NP | CONDITION T 62 |
| NQ | CONDITION T 651 |
| NR | CONDITION T 6510 |
| NS | CONDITION T 6511 |
| NT | CONDITION T 652 |
| NW | CONDITION T 7 |
| NX | CONDITION T 73 |
| NY | CONDITION T 7351 |
| NZ | CONDITION T 73510 |
| PA | CONDITION T 73511 |
| PB | CONDITION T 7352 |
| PC | CONDITION T 8 |
| PD | CONDITION T 81 |
| PE | CONDITION T 851 |
| PF | CONDITION T 8510 |
| PG | CONDITION T 8511 |
| MW | CONDITION W |
| MG | CYANIDE HARDENED TO INTERNATIONAL HARVESTER CO SPEC A-40, CLASS 1-A |
| JY | DESCALED |
| EM | DOUBLE NORMALIZED |
| JB | DRAWN |
| EG | DRAWN TEMPER |
| BL | DRAWN-GENERAL PURPOSE |
| LR | DRY ANNEALED |
| GA | EIGHTH HARD |
| GC | EXTRA HARD |
| EL | EXTRA HARD H-19 5052 MATERIAL |
| GD | EXTRA SPRING TEMPER |
| CU | EXTRUDED |
| AD | F-AS FABRICATED |
| JX | FORGED |
| MH | FPS0090, COND TH1050, GENERAL DYNAMICS CORP, CONVAIR AEROSPACE DIV, FT WORTH OPERATIONS |
| EJ | FULL HARD |
| AE | H-1 STRAIN HARDENED |
| SC | H-1025 STRAIN HARDENED |
| EX | H-111 STRAIN HARDENED |
| LN | H-111 TEMPER |
| AV | H-112 AS ROLLED |
| GB | H-116 SPECIALLY TREATED |
| HJ | H-117 SPECIALLY TREATED |
| CA | H-12 STRAIN HARDENED, 1/2 HARD |
| AF | H-12 STRAIN HARDENED, 1/4 HARD |
| SB | H-13 STRAIN HARDENED |
| AG | H-14 STRAIN HARDENED, 1/2 HARD |
| LW | H-15 STRAIN HARDENED |
| AH | H-16 STRAIN HARDENED, 3/4 HARD |
| DE | H-16 STRAIN HARDENED, FULL HARD |
| AJ | H-18 STRAIN HARDENED, FULL HARD |
| AK | H-19 STRAIN HARDENED, EXTRA HARD |
| KH | H-2 STRAIN HARDENED, 1/4 HARD |
| PK | H-20 STRAIN HARDENED |
| PL | H-22 STRAIN HARDENED |
| TJ | H-23 STRAIN HARDENED |
| PM | H-24 STRAIN HARDENED |
| TP | H-24 STRAIN HARDENED, PARTIALLY ANNEALED TO 1/2 HARD |
| PN | H-26 STRAIN HARDENED |
| PP | H-28 STRAIN HARDENED |
| KJ | H-3 STRAIN HARDENED |
| PQ | H-32 STRAIN HARDENED |
| DF | H-32 STRAIN HARDENED AND STABILIZED TO 1/2 HARD |
| TQ | H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD |
| QP | H-321 STRAIN HARDENED |
| QQ | H-323 STRAIN HARDENED |
| LL | H-323 STRAIN HARDENED AND STABILIZED |
| RZ | H-323 STRAIN HARDENED, 1/4 HARD |
| HK | H323 STRAIN HARDENED, 1/4 HARD TEMPER, STABILIZED |
| LP | H-323 TEMPER |
| PR | H-34 STRAIN HARDENED |
| TR | H-34 STRAIN HARDENED, STABILIZED TO 1/2 HARD |
| QR | H-343 STRAIN HARDENED |
| PS | H-36 STRAIN HARDENED |
| DG | H-36 STRAIN HARDENED AND STABILIZED TO FULL HARD |
| TS | H-36 STRAIN HARDENED, STABILIZED TO 3/4 HARD |
| PT | H-38 STRAIN HARDENED |
| TT | H-38 STRAIN HARDENED, STABILIZED TO FULL HARD |
| KK | H-4 STRAIN HARDENED, 1/2 HARD |
| KL | H-5 STRAIN HARDENED |
| KM | H-6 STRAIN HARDENED, 3/4 HARD |
| KN | H-7 STRAIN HARDENED |
| KP | H-8 STRAIN HARDENED, FULL HARD |
| CF | HALF HARD |
| CH | HARD |
| BM | HARD DRAWN |
| LS | HARD TEMPER |
| CY | HARDENED |
| LB | HARDENED AND TEMPERED CONDITION P |
| LC | HARDENED AND TEMPERED CONDITION Q |
| KZ | HARDENED AND TEMPERED CONDITION R |
| LA | HARDENED AND TEMPERED CONDITION S |
| LD | HARDENED AND TEMPERED CONDITION T |
| LE | HARDENED AND TEMPERED CONDITION U |
| LF | HARDENED AND TEMPERED CONDITION V |
| LG | HARDENED AND TEMPERED CONDITION W |
| LH | HARDENED AND TEMPERED CONDITION X |
| LJ | HARDENED AND TEMPERED CONDITION Y |
| LK | HARDENED AND TEMPERED CONDITION Z |
| JP | HEAT TREATED |
| MC | HOT DRAWN |
| PJ | HOT FINISH |
| CT | HOT ROLLED |
| JS | HOT WORKED |
| GY | INTERMEDIATE TEMPER |
| BC | LIGHT ANNEALED |
| EH | LIGHT COLD ROLLED |
| BN | LIGHT DRAWN-BENDING |
| PW | NATURAL AGED |
| GZ | NITRIDED |
| EQ | NONHARDENED |
| CV | NORMALIZED |
| AB | O-ANNEALED |
| AC | O-ANNEALED, RECRYSTALLIZED |
| HB | OIL QUENCHED |
| JR | OILED |
| PX | PARTIALLY ANNEALED |
| PZ | PARTIALLY ANNEALED TO 1/2 HARD |
| PY | PARTIALLY ANNEALED TO 1/4 HARD |
| QA | PARTIALLY ANNEALED TO 3/4 HARD |
| QB | PARTIALLY ANNEALED TO FULL HARD |
| MD | PATENTING |
| ET | PER ASTM-A269 |
| JQ | PICKLED |
| JZ | PRECIPITATION TREATED AT 200 DEG C |
| MJ | QQ-S-636, COND T-2, 1/2 HARD |
| MK | QQ-S-636, COND T-3, 1/4 HARD |
| ML | QQ-S-636, COND T-4, SOFT SKIN ROLLED |
| MM | QQ-S-636, COND T-5, DEAD SOFT |
| CE | QUARTER HARD |
| DD | QUENCH HARDENED |
| HZ | QUENCH SOFTENED |
| LX | QUENCH, MIL-H-6875, COND H1025 |
| MN | QUENCH-AGE HARDENED |
| EN | QUENCHED |
| JW | REHEATED |
| JT | ROLLED |
| ER | SEMIHARDENED |
| CD | SKIN HARD |
| HD | SOFT |
| BB | SOFT ANNEALED |
| GE | SOFT TEMPER |
| JA | SOFTENED |
| EB | SOLUTION HEAT TREATED |
| HH | SOLUTION HEAT-TREATED-ARTIFICIALLY AGED |
| GF | SOLUTION TREATED |
| MF | SPECIALLY TREATED |
| LT | SPHERODIZE ANNEALED |
| BR | SPHEROIDIZED |
| KF | SPRING HARD |
| CJ | SPRING TEMPER |
| PH | STABILIZED |
| QD | STABILIZED TO 1/2 HARD |
| QC | STABILIZED TO 1/4 HARD |
| QE | STABILIZED TO 3/4 HARD |
| QF | STABILIZED TO FULL HARD |
| ME | STRAIN HARDENED |
| MA | STRAIN HARDENED, 1/2 HARD |
| MQ | STRAIN HARDENED, 3/8 HARD |
| MB | STRAIN HARDENED, HARD |
| GQ | STRESS EQUALIZED |
| CB | STRESS RELIEVED |
| QS | STRESS RELIEVED BY STRETCHING |
| GR | STRESSED RELIEVED |
| QT | T-1 SOLUTION HEAT TREATED |
| QG | T-3 SOLUTION HEAT TREATED |
| TU | T-3 SOLUTION HEAT TREATED, COLD WORKED |
| TK | T-351 |
| RB | T-351 SOLUTION HEAT TREATED |
| RW | T-351 SOLUTION HEAT TREATED, COLD WORKED, AND STRESS RELIEVED BY STRETCHING |
| UA | T-351 SOLUTION HEAT TREATED, COLD WORKED, STRESS RELIEVED BY STRETCHING |
| ES | T-351 TEMPER |
| RF | T-3510 SOLUTION HEAT TREATED |
| RG | T-3511 SOLUTION HEAT TREATED |
| TL | T-359 SOLUTION HEAT TREATED |
| QH | T-36 SOLUTION HEAT TREATED |
| TX | T-36 SOLUTION HEAT TREATED, COLD WORKED BY REDUCTION OF 6 PERCENT |
| TM | T-361 SOLUTION HEAT TREATED |
| QJ | T-4 SOLUTION HEAT TREATED |
| TV | T-4 SOLUTION HEAT TREATED, NATURAL AGED |
| DH | T-42 SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| LM | T-42 SOLUTION HEAT TREATED AND NATURAL AGED |
| FD | T-42 SOLUTION HEAT TREATED BY THE USER |
| TY | T-42 SOLUTION HEAT TREATED, NATURAL AGED |
| RC | T-451 SOLUTION HEAT TREATED |
| RH | T-4510 SOLUTION HEAT TREATED |
| RJ | T-4511 SOLUTION HEAT TREATED |
| QW | T-5 SOLUTION HEAT TREATED |
| TC | T-52 SOLUTION HEAT TREATED |
| QK | T-6 SOLUTION HEAT TREATED |
| TW | T-6 SOLUTION HEAT TREATED, ARTIFICALLY AGED |
| SD | T-62 SOLUTION HEAT TREATED |
| DJ | T-62 SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| EW | T-651 SOLUTION ARTIFICIALLY AGED |
| RD | T-651 SOLUTION HEAT TREATED |
| RX | T-651 SOLUTION HEAT TREATED, ARTIFICALLY AGED, AND STRESS RELIEVED BY STRETCHING |
| UB | T-651 SOLUTION HEAT TREATED, ARTIFICALLY AGED, STRESS RELIEVED BY STRETCHING |
| RK | T-6510 SOLUTION HEAT TREATED |
| RL | T-6511 SOLUTION HEAT TREATED |
| QY | T-73 SOLUTION HEAT TREATED |
| DK | T-73 SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| TB | T-7351 SOLUTION HEAT TREATED |
| RQ | T-73510 SOLUTION HEAT TREATED |
| HN | T-73510 SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING |
| RR | T-73511 SOLUTION HEAT TREATED |
| HP | T-73511 SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING |
| TN | T-7451 SOLUTION HEAT TREATED |
| QZ | T-76 SOLUTION HEAT TREATED |
| RM | T-7651 SOLUTION HEAT TREATED |
| HM | T-7651 SOLUTION HEAT TREATED, STRESS RELIEVED |
| RS | T-76510 SOLUTION HEAT TREATED |
| HQ | T-76510 SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING |
| RT | T-76511 SOLUTION HEAT TREATED |
| HR | T-76511 SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING |
| QX | T-8 SOLUTION HEAT TREATED |
| QM | T-81 SOLUTION HEAT TREATED |
| DL | T-81 SOLUTION HEAT TREATED AND ARTIFICIALLY AGED |
| RA | T-84 SOLUTION HEAT TREATED |
| RE | T-851 SOLUTION HEAT TREATED |
| RN | T-8510 SOLUTION HEAT TREATED |
| RP | T-8511 SOLUTION HEAT TREATED |
| QL | T-86 SOLUTION HEAT TREATED |
| TZ | T-86 SOLUTION HEAT TREATED, COLD WORKED BY REDUCTION OF 6 PERCENT, ARTIFICALLY AGED |
| SE | T-87 SOLUTION HEAT TREATED |
| FJ | T-87PRECIPITATION HEAT TREATED |
| KQ | TE ARTIFICIALLY AGED |
| UC | TEMPER DESIGNATION, T861 |
| KA | TEMPER GRADE 1 |
| KB | TEMPER GRADE 2 |
| KC | TEMPER GRADE 3 |
| KD | TEMPER GRADE 4 |
| KE | TEMPER GRADE 5 |
| EE | TEMPER, CONDITION 1 |
| EC | TEMPER, CONDITION 4 |
| RY | TEMPER, CONDITION 5 |
| EP | TEMPERED |
| JE | TEMPERED CONDITION P |
| JF | TEMPERED CONDITION Q |
| JC | TEMPERED CONDITION R |
| JD | TEMPERED CONDITION S |
| JG | TEMPERED CONDITION T |
| JH | TEMPERED CONDITION U |
| JJ | TEMPERED CONDITION V |
| JK | TEMPERED CONDITION W |
| JL | TEMPERED CONDITION X |
| JM | TEMPERED CONDITION Y |
| JN | TEMPERED CONDITION Z |
| CG | THREE QUARTERS HARD |
| KY | W(H)P-SOLUTION TREATED, ARTIFICALLY AGED, HARD |
| KX | W/1/2H/P-SOLUTION TREATED, ARTIFICIALLY AGED, HALF HARD |
| KS | W/1/2H/-SOLUTION TREATED, HALF HARD |
| KW | W/1/4H/P-SOLUTION TREATED, ARTIFICIALLY AGED, QUARTER HARD |
| KR | W/1/4H/-SOLUTION TREATED, QUARTER HARD |
| KT | W/H/-SOLUTION TREATED, HARD |
| KG | W-SOLUTION TREATED |
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
AMWN*AMODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AMWNAU0)
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information