A rigid or flexible tubing having other than uniform fabricated shapes or forms. It is specifically designed to prevent any undesirable flow of current between conductors or between conductors and other objects. Includes shrinkable type items. Excludes:items not having rated electrical characteristics. Also Excludes:BUSHING, SLEEVE; CABLE NIPPLE, ELECTRICAL; and INSULATION SLEEVING, ELECTRICAL.
ISAC Reply 3AAP added to MRC AFZP.
ISAC Reply 3AAQ added to MRC AFZP.
ISAC Reply 3AEE added to MRC AFZP.
ISAC Reply 3HOU added to MRC AFZP.
ISAC Reply 1A deleted from MRC AFZP.
ISAC Reply 1B deleted from MRC AFZP.
ISAC Reply 3AAP added to MRC AFZQ.
ISAC Reply 3AAQ added to MRC AFZQ.
ISAC Reply 3AEE added to MRC AFZQ.
ISAC Reply 3HOU added to MRC AFZQ.
ISAC Reply 1A deleted from MRC AFZQ.
ISAC Reply 1B deleted from MRC AFZQ.
ISAC Reply 3AAP added to MRC AFZR.
ISAC Reply 3AAQ added to MRC AFZR.
ISAC Reply 3AEE added to MRC AFZR.
ISAC Reply 3HOU added to MRC AFZR.
ISAC Reply 1A deleted from MRC AFZR.
ISAC Reply 1B deleted from MRC AFZR.
ISAC Reply 3AAP added to MRC AFZS.
ISAC Reply 3AAQ added to MRC AFZS.
ISAC Reply 3AEE added to MRC AFZS.
ISAC Reply 3HOU added to MRC AFZS.
ISAC Reply 1A deleted from MRC AFZS.
ISAC Reply 1B deleted from MRC AFZS.
ISAC Reply 3AAP added to MRC AFZT.
ISAC Reply 3AAQ added to MRC AFZT.
ISAC Reply 3AEE added to MRC AFZT.
ISAC Reply 3HOU added to MRC AFZT.
ISAC Reply 1A deleted from MRC AFZT.
ISAC Reply 1B deleted from MRC AFZT.
ISAC Reply 3AAP added to MRC AFZU.
ISAC Reply 3AAQ added to MRC AFZU.
ISAC Reply 3AEE added to MRC AFZU.
ISAC Reply 3HOU added to MRC AFZU.
ISAC Reply 1A deleted from MRC AFZU.
ISAC Reply 1B deleted from MRC AFZU.
ISAC Reply 3AAP added to MRC AFZV.
ISAC Reply 3AAQ added to MRC AFZV.
ISAC Reply 3AEE added to MRC AFZV.
ISAC Reply 3HOU added to MRC AFZV.
ISAC Reply 1A deleted from MRC AFZV.
ISAC Reply 1B deleted from MRC AFZV.
ISAC Reply 3AAP added to MRC AFZW.
ISAC Reply 3AAQ added to MRC AFZW.
ISAC Reply 3AEE added to MRC AFZW.
ISAC Reply 3HOU added to MRC AFZW.
ISAC Reply 1A deleted from MRC AFZW.
ISAC Reply 1B deleted from MRC AFZW.
ISAC Reply 3AAP added to MRC AFZX.
ISAC Reply 3AAQ added to MRC AFZX.
ISAC Reply 3AEE added to MRC AFZX.
ISAC Reply 3HOU added to MRC AFZX.
ISAC Reply 1A deleted from MRC AFZX.
ISAC Reply 1B deleted from MRC AFZX.
ISAC Reply 3AAP added to MRC AFZY.
ISAC Reply 3AAQ added to MRC AFZY.
ISAC Reply 3AEE added to MRC AFZY.
ISAC Reply 3HOU added to MRC AFZY.
ISAC Reply 1A deleted from MRC AFZY.
ISAC Reply 1B deleted from MRC AFZY.
ISAC Reply 3AAP added to MRC AFZZ.
ISAC Reply 3AAQ added to MRC AFZZ.
ISAC Reply 3AEE added to MRC AFZZ.
ISAC Reply 3HOU added to MRC AFZZ.
ISAC Reply 1A deleted from MRC AFZZ.
ISAC Reply 1B deleted from MRC AFZZ.
ISAC Reply 3AAP added to MRC AGAA.
ISAC Reply 3AAQ added to MRC AGAA.
ISAC Reply 3AEE added to MRC AGAA.
ISAC Reply 3HOU added to MRC AGAA.
ISAC Reply 1A deleted from MRC AGAA.
ISAC Reply 1B deleted from MRC AGAA.
ISAC Reply 3AAP added to MRC AGAB.
ISAC Reply 3AAQ added to MRC AGAB.
ISAC Reply 3AEE added to MRC AGAB.
ISAC Reply 3HOU added to MRC AGAB.
ISAC Reply 1A deleted from MRC AGAB.
ISAC Reply 1B deleted from MRC AGAB.
ISAC Reply 3AAP added to MRC AGAC.
ISAC Reply 3AAQ added to MRC AGAC.
ISAC Reply 3AEE added to MRC AGAC.
ISAC Reply 3HOU added to MRC AGAC.
ISAC Reply 1A deleted from MRC AGAC.
ISAC Reply 1B deleted from MRC AGAC.
ISAC Reply 3AAP added to MRC AGAD.
ISAC Reply 3AAQ added to MRC AGAD.
ISAC Reply 3AEE added to MRC AGAD.
ISAC Reply 3HOU added to MRC AGAD.
ISAC Reply 1A deleted from MRC AGAD.
ISAC Reply 1B deleted from MRC AGAD.
ISAC Reply 3AAP added to MRC AGAE.
ISAC Reply 3AAQ added to MRC AGAE.
ISAC Reply 3AEE added to MRC AGAE.
ISAC Reply 3HOU added to MRC AGAE.
ISAC Reply 1A deleted from MRC AGAE.
ISAC Reply 1B deleted from MRC AGAE.
ISAC Reply 3AAP added to MRC AGAF.
ISAC Reply 3AAQ added to MRC AGAF.
ISAC Reply 3AEE added to MRC AGAF.
ISAC Reply 3HOU added to MRC AGAF.
ISAC Reply 1A deleted from MRC AGAF.
ISAC Reply 1B deleted from MRC AGAF.
ISAC Reply 3AAP added to MRC AGAG.
ISAC Reply 3AAQ added to MRC AGAG.
ISAC Reply 3AEE added to MRC AGAG.
ISAC Reply 3HOU added to MRC AGAG.
ISAC Reply 1A deleted from MRC AGAG.
ISAC Reply 1B deleted from MRC AGAG.
ISAC Reply 3AAP added to MRC AGAH.
ISAC Reply 3AAQ added to MRC AGAH.
ISAC Reply 3AEE added to MRC AGAH.
ISAC Reply 3HOU added to MRC AGAH.
ISAC Reply 1A deleted from MRC AGAH.
ISAC Reply 1B deleted from MRC AGAH.
ISAC Reply 3AAP added to MRC AGAJ.
ISAC Reply 3AAQ added to MRC AGAJ.
ISAC Reply 3AEE added to MRC AGAJ.
ISAC Reply 3HOU added to MRC AGAJ.
ISAC Reply 1A deleted from MRC AGAJ.
ISAC Reply 1B deleted from MRC AGAJ.
ISAC Reply 3AAP added to MRC AGAK.
ISAC Reply 3AAQ added to MRC AGAK.
ISAC Reply 3AEE added to MRC AGAK.
ISAC Reply 3HOU added to MRC AGAK.
ISAC Reply 1A deleted from MRC AGAK.
ISAC Reply 1B deleted from MRC AGAK.
ISAC Reply 3AAP added to MRC AGAL.
ISAC Reply 3AAQ added to MRC AGAL.
ISAC Reply 3AEE added to MRC AGAL.
ISAC Reply 3HOU added to MRC AGAL.
ISAC Reply 1A deleted from MRC AGAL.
ISAC Reply 1B deleted from MRC AGAL.
ISAC Reply 3AAP added to MRC AGAM.
ISAC Reply 3AAQ added to MRC AGAM.
ISAC Reply 3AEE added to MRC AGAM.
ISAC Reply 3HOU added to MRC AGAM.
ISAC Reply 1A deleted from MRC AGAM.
ISAC Reply 1B deleted from MRC AGAM.
ISAC Reply 3AAP added to MRC BNKG.
ISAC Reply 3AAQ added to MRC BNKG.
ISAC Reply 3AEE added to MRC BNKG.
ISAC Reply 3HOU added to MRC BNKG.
ISAC Reply 1A deleted from MRC BNKG.
ISAC Reply 1B deleted from MRC BNKG.
ISAC Reply 3AAP added to MRC CQXG.
ISAC Reply 3AAQ added to MRC CQXG.
ISAC Reply 3AEE added to MRC CQXG.
ISAC Reply 3HOU added to MRC CQXG.
ISAC Reply 1A deleted from MRC CQXG.
ISAC Reply 1B deleted from MRC CQXG.
ISAC Reply 3AAP added to MRC CRDG.
ISAC Reply 3AAQ added to MRC CRDG.
ISAC Reply 3AEE added to MRC CRDG.
ISAC Reply 3HOU added to MRC CRDG.
ISAC Reply 1A deleted from MRC CRDG.
ISAC Reply 1B deleted from MRC CRDG.
ISAC Reply 3AAP added to MRC HGTH.
ISAC Reply 3AAQ added to MRC HGTH.
ISAC Reply 3AEE added to MRC HGTH.
ISAC Reply 3HOU added to MRC HGTH.
ISAC Reply 1A deleted from MRC HGTH.
ISAC Reply 1B deleted from MRC HGTH.
ISAC Reply 3AAP added to MRC AGAP.
ISAC Reply 3AAQ added to MRC AGAP.
ISAC Reply 3AEE added to MRC AGAP.
ISAC Reply 3HOU added to MRC AGAP.
ISAC Reply 1A deleted from MRC AGAP.
ISAC Reply 1B deleted from MRC AGAP.
ISAC Reply 3AAP added to MRC AGAQ.
ISAC Reply 3AAQ added to MRC AGAQ.
ISAC Reply 3AEE added to MRC AGAQ.
ISAC Reply 3HOU added to MRC AGAQ.
ISAC Reply 1A deleted from MRC AGAQ.
ISAC Reply 1B deleted from MRC AGAQ.
ISAC Reply 3AAP added to MRC AGAR.
ISAC Reply 3AAQ added to MRC AGAR.
ISAC Reply 3AEE added to MRC AGAR.
ISAC Reply 3HOU added to MRC AGAR.
ISAC Reply 1A deleted from MRC AGAR.
ISAC Reply 1B deleted from MRC AGAR.
ISAC Reply 3AAP added to MRC ABJH.
ISAC Reply 3AEE added to MRC ABJH.
ISAC Reply 3HOU added to MRC ABJH.
ISAC Reply 3AAP added to MRC ADZC.
ISAC Reply 3AEE added to MRC ADZC.
ISAC Reply 3HOU added to MRC ADZC.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED61626*)
IF STYLE/REPLY CODE(s) B1 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAB and AGAK and AGAH and AGAJ and AGAM and AGAL)
IF STYLE/REPLY CODE(s) B2 OR B15 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAB and AGAK and AGAJ and AGAL and AGAH)
IF STYLE/REPLY CODE(s) B3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFZP and AGAK and AGAP and AGAJ and AFZQ and AFZS and HGTH and AGAM and AFZR)
IF STYLE/REPLY CODE(s) B4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFZS and AGAJ and AFZR and AGAK and AGAB)
IF STYLE/REPLY CODE(s) B5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFZV and AFZT and AFZU and AGAH and AGAQ and AGAB and AGAC)
IF STYLE/REPLY CODE(s) B6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFZU and AGAB and AGAG and AGAH and AGAQ and AFZV and AGAC and AGAA)
IF STYLE/REPLY CODE(s) B7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAG and AFZU and AGAB and AGAA and AGAC and AFZV and AGAR and AGAD and AFZW)
IF STYLE/REPLY CODE(s) B8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAH and AGAG and AFZU and AGAB and AGAA and AFZV and AGAQ and AGAC and AFZW and AFZX and AGAD and AGAE)
IF STYLE/REPLY CODE(s) B9 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAG and AGAB and AFZU and AGAA and AFZZ and AFZV and AFZW and AGAC and AGAQ and AGAD and AGAR and AFZX and AFZY and AGAE and AGAF)
IF STYLE/REPLY CODE(s) B10 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFZP and AGAB and AGAH and AGAK)
IF STYLE/REPLY CODE(s) B11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFZQ and AFZP and AGAH and AGAJ and AGAK and AGAM and BNKG and CQXG and CRDG and HGTH)
IF STYLE/REPLY CODE(s) B12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFZU and AFZT and AFZV and AGAH and AGAC and AGAQ and AGAB)
IF STYLE/REPLY CODE(s) B13 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAB and AFZU and AGAH and AGAA and AGAQ and AFZV and AGAC)
IF STYLE/REPLY CODE(s) B14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAK and AGAB and AGAH and AGAM and AGAJ)
IF STYLE/REPLY CODE(s) B16 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAK and AGAA and AGAJ and AFZQ and AGAG and AFZP)
IF STYLE/REPLY CODE(s) B17 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAB and AFZU and AGAH and AFZV and AGAC and AFZW and AGAD and AFZX and AGAE)
IF STYLE/REPLY CODE(s) B18 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AFZV and AGAA and AFZT and AGAJ and AFZQ and AGAH and AGAB and AFZU and AGAD and AFZW and AGAC)
IF STYLE/REPLY CODE(s) B19 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAC and AGAA and AGAH and AGAB and AFZU and AFZW and AGAD and AFZV)
IF STYLE/REPLY CODE(s) B20 OR B21 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGAH and HGTH and AFZP and AGAK and AFZQ and AGAJ)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLB2)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAL1360 | B1 | BOOT-STRAIGHT |
| AAL1369 | B10 | BOOT-STRAIGHT |
| AAL1370 | B11 | BOOT-90 DEGREES |
| AAL1356 | B12 | TRANSITION-CROSS-SHAPED |
| AAL1357 | B13 | DOUBLE TRANSITION - 90 DEGREES |
| DQ00293 | B14 | BOOT, RECTANGULAR, STRAIGHT |
| DQ00294 | B15 | BOOT, RECTANGULAR, WITH JACK SCREW HOLES |
| DQ00295 | B16 | BOOT, 45 DEGREE |
| DQ00296 | B17 | TRANSITION, 1 TO 3 CABLES, PARALLEL |
| DQ00297 | B18 | TRANSITION, TWO SIDE BREAKOUTS |
| DQ00298 | B19 | TRANSITION, TWO 30 DEGREE SIDE BREAKOUTS |
| AAL1361 | B2 | BOOT-STRAIGHT-LONG |
| DQ00299 | B20 | BOOT, RECTANGULAR, 90 DEGREE SIDE ENTRY |
| DQ00300 | B21 | BOOT, 90 DEGREES |
| AAL1362 | B3 | BOOT-90 DEGREES |
| AAL1363 | B4 | BOOT-RECTANGULAR-90 DEGREES |
| AAL1364 | B5 | TRANSITION-T |
| AAL1365 | B6 | TRANSITION-45 DEGREES |
| AAL1366 | B7 | TRANSITION-Y |
| AAL1367 | B8 | TRANSITION-1 TO 3 CABLES |
| AAL1368 | B9 | TRANSITION-1 TO 4 CABLES |
AFZP*JLARGE END WALL THICKNESS OF MAIN BODY
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZP3AAQJAC2.0*;AFZP3AAQJAC2.0$JAC2.0*;AFZP3AAQJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZQ*JSMALL END WALL THICKNESS OF MAIN BODY
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZQ3AAQJAC2.0*;AFZQ3AAQJAC2.0$JAC2.0*;AFZQ3AAQJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZR*JDISTANCE FROM INTERSECTING CENTERLINES TO EDGE OF SMALL END
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZR3AAQJAC2.0*;AFZR3AAQJAC2.0$JAC2.0*;AFZR3AAQJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZS*JDISTANCE FROM CENTERLINE OF SMALL END TO EDGE OF LARGE END
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZS3AEEJAA2.0*;AFZS3AEEJAA2.0$JAA2.0*;AFZS3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZT*JDISTANCE FROM CENTERLINE OF MAIN BODY TO END OF FIRST BRANCH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZT3AEEJAA2.0*;AFZT3AEEJAA2.0$JAA2.0*;AFZT3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZU*JMAIN BODY INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZU3AEEJAA2.0*;AFZU3AEEJAA2.0$JAA2.0*;AFZU3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZV*JFIRST BRANCH INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZV3AAPJAC2.0*;AFZV3AAPJAC2.0$JAC2.0*;AFZV3AAPJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZW*JSECOND BRANCH INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZW3AEEJAA2.0*;AFZW3AEEJAA2.0$JAA2.0*;AFZW3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZX*JTHIRD BRANCH INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZX3AEEJAA2.0*;AFZX3AEEJAA2.0$JAA2.0*;AFZX3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZY*JFOURTH BRANCH INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZY3AAQJAA2.0*;AFZY3AAQJAA2.0$JAA2.0*;AFZY3AAQJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFZZ*JDISTANCE FROM INTERSECTING CENTERLINE OF MAIN BODY TO END OF SECOND BRANCH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFZZ3AAPJAB2.0*;AFZZ3AAPJAB2.0$JAB2.0*;AFZZ3AAPJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAA*JDISTANCE FROM INTERSECTING CENTERLINE OF MAIN BODY TO END OF FIRST BRANCH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAA3AAQJAB2.0*;AGAA3AAQJAB2.0$JAB2.0*;AGAA3AAQJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAB*JMAIN BODY WALL THICKNESS
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAB3AAQJAB2.0*;AGAB3AAQJAB2.0$JAB2.0*;AGAB3AAQJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAC*JFIRST BRANCH WALL THICKNESS
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAC3AEEJAB2.0*;AGAC3AEEJAB2.0$JAB2.0*;AGAC3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAD*JSECOND BRANCH WALL THICKNESS
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAD3AEEJAB2.0*;AGAD3AEEJAB2.0$JAB2.0*;AGAD3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAE*JTHIRD BRANCH WALL THICKNESS
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAE3AEEJAB2.0*;AGAE3AEEJAB2.0$JAB2.0*;AGAE3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAF*JFOURTH BRANCH WALL THICKNESS
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAF3AEEJAB2.0*;AGAF3AEEJAB2.0$JAB2.0*;AGAF3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAG*JDISTANCE FROM EDGE OF MAIN BODY TO INTERSECTING CENTERLINES
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAG3AEEJAA2.0*;AGAG3AEEJAA2.0$JAA2.0*;AGAG3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAH*JMAIN BODY OVERALL LENGTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAH3AEEJAB2.0*;AGAH3AEEJAB2.0$JAB2.0*;AGAH3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAJ*JMAIN BODY SMALL END INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAJ3AEEJAB2.0*;AGAJ3AEEJAB2.0$JAB2.0*;AGAJ3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAK*JMAIN BODY LARGE END INSIDE DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAK3AAQJAC2.0*;AGAK3AAQJAC2.0$JAC2.0*;AGAK3AAQJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAL*JDISTANCE FROM BOTTOM OF SHOULDER TO LARGE END OF MAIN BODY
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAL3AAQJAC2.0*;AGAL3AAQJAC2.0$JAC2.0*;AGAL3AAQJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAM*JDISTANCE FROM TOP OF SHOULDER TO SMALL END OF MAIN BODY
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAM3AAQJAA2.0*;AGAM3AAQJAA2.0$JAA2.0*;AGAM3AAQJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNKG*JEND LARGEST DIAMETER
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNKG3AAPJAA2.0*;BNKG3AAPJAA2.0$JAA2.0*;BNKG3AAPJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQXG*JLIP HEIGHT
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQXG3AAPJAA2.0*;CQXG3AAPJAA2.0$JAA2.0*;CQXG3AAPJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRDG*JLIP WIDTH
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRDG3AEEJAB2.0*;CRDG3AEEJAB2.0$JAB2.0*;CRDG3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HGTH*JHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(HGTH3AEEJAB2.0*;HGTH3AEEJAB2.0$JAB2.0*;HGTH3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAP*JANGLE BETWEEN LARGE END AND SMALL END CENTERLINES IN DEG
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAP3AAPJB2.0*;AGAP3AAPJB2.0$JB2.0*;AGAP3AAPJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAQ*JANGLE BETWEEN MAIN BODY AND FIRST BRANCH CENTERLINES IN DEG
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAQ3AAPJB2.0*;AGAQ3AAPJB2.0$JB2.0*;AGAQ3AAPJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGAR*JANGLE BETWEEN MAIN BODY AND SECOND BRANCH CENTERLINES IN DEG
NONE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGAR3AAQJB2.0*;AGAR3AAQJB2.0$JB2.0*;AGAR3AAQJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AAQ | AFTER UNRESTRICTED RECOVERY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDPCAT00*;MATT3AEEDPCAT00$DPCZ000*;MATT3AEEDPCAT00$$DPCZ000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CIL | COATING |
| 3CIM | IMPREGNATION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ADA000 | ADHESIVE |
| ALA000 | ALUMINUM |
| BRA000 | BRASS |
| CUA000 | COPPER |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| RCAC02 | NEOPRENE |
| FBB000 | NYLON (USE PCP000) |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCXL04 | PLASTIC CROSS-LINKED POLYOLEFIN |
| PCBY00 | PLASTIC ETHYL CELLULOSE |
| PCCS00 | PLASTIC ETHYLENE-TETRAFLUOROETHYLENE |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PLF000 | PLASTIC FLUOROPOLYMER |
| PCM000 | PLASTIC PHENOL FORMALDEHYDE (PMO) |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| ZSB000 | PLASTIC POLYCHLOROPRENE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCDU00 | PLASTIC POLYMER |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCCC00 | PLASTIC POLYVINYL CHLORIDE-ACETATE |
| PCAS00 | PLASTIC POLYVINYLIDENE FLUORIDE |
| PCAK00 | PLASTIC SILICONE |
| PCAP00 | PLASTIC VINYL |
| PCAT00 | PLASTIC VINYLIDENE CHLORIDE |
| RSF000 | RESIN ELASTOMER |
| RSC000 | RESIN NATURAL |
| RSA000 | RESIN SYNTHETIC |
| RCE000 | RUBBER |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RCAC00 | RUBBER NEOPRENE |
| RCY000 | RUBBER POLYCHLOROPRENE |
| RC0012 | RUBBER POLYMETHYLENE-PERFLUOROALKYLENE CLASS FKM |
| RCC000 | RUBBER SILICONE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| SLK000 | SILICONE |
| ADA002 | THERMOPLASTIC ADHESIVE |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CIL | COATING |
| 3CIM | IMPREGNATION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
BDBN*GMARKINGS
AN INDICATION OF THE MARKINGS ON THE ITEM.
Enter clear text.
(BDBNGCLEARTEXT)
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDBU0150*;HUESDNA0000$DGL0000*;HUESDNA0000$$DGL0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0150 | BLUE, TRANSPARENT |
| BR0000 | BROWN |
| BR0008 | BROWN, CHOCOLATE |
| CL0000 | CLEAR |
| GL0000 | GOLD |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| PK0000 | PINK |
| PU0000 | PURPLE |
| RE0000 | RED |
| SL0000 | SILVER |
| TA0000 | TAN |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| YE0000 | YELLOW |
FLEXDFLEXIBILITY
FLEXIBLE,CAPABLE OF BEING BENT,TURNED OR TWISTED,WITHIN LIMITS,WITHOUT BREAKING,OR RIGID,RESISTING CHANGE OF FORM,INFLEXIBLE.
Enter the applicable reply code from the table below
(FLEXDF*;FLEXDB$DC*)
| Table 1 |
| Reply Code (AD03) | Reply |
| A | FLEXIBLE |
| B | RIGID |
| C | SEMIFLEXIBLE |
| F | SEMIRIGID |
AGAU*BHEAT SHRINKAGE RATING IN PERCENT
THE PERCENTAGE AN ITEM IS RATED TO REDUCE IN SIZE UPON THE APPLICATION OF HEAT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AGAUB2.0)
ABJH*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CQBC*JMINIMUM TENSILE STRENGTH
THE MAXIMUM RATED LOAD IN TENSION APPLIED IN A LONGITUDINAL DIRECTION,PER UNIT OF CROSS-SECTIONAL AREA,THAT THE MATERIAL CAN WITHSTAND WITHOUT RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CQBCJP2.0*;CQBCJP2.0$$JP2.1*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| P | POUNDS PER SQUARE INCH |
IF YOU ANSWER MRC AAPB, YOU MUST NOT ANSWER MRC (UKBG)
AAPB*BDIELECTRIC WITHSTANDING VOLTAGE IN VOLTS
THE MAXIMUM VOLTAGE THE INSULATING MATERIALS OF THE ITEM WILL WITHSTAND WITHOUT RESULTING IN DISRUPTIVE DISCHARGE OR DETERIORATION,EXPRESSED IN VOLTS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AAPBB2.0)
UKBG*JDIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS
THE MAXIMUM POTENTIAL GRADIENT THE INSULATING MATERIAL CAN WITHSTAND,PER UNIT THICKNESS,WITHOUT RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(UKBGJAB2.0*)
| Table 1 |
| Reply Code (AP24) | Reply |
| AC | KILOVOLTS PER MILLIMETER |
| AB | VOLTS PER MIL /0.001 INCH/ |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ADZC3AEEDABX*;ADZC3AEEDABX$DAEL*;ADZC3AEEDABX$$DAEL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAP | AS SUPPLIED |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| ABY | ACID RESISTANT |
| ABZ | ALCOHOL RESISTANT |
| ACK | ALKALI RESISTANT |
| AAB | CHEMICAL RESISTANT |
| AAC | CORROSION RESISTANT |
| AGZ | DURATION |
| ACL | FLAME RESISTANT |
| AAU | FLUID RESISTANT |
| AJK | GASOLINE |
| AEL | HYDRAULIC FLUID |
| ADN | JET FUEL RESISTANT |
| AGY | MEDIUM TEMPERATURE |
| ACC | MILDEW RESISTANT |
| AAX | OIL RESISTANT |
| ACN | OZONE RESISTANT |
| ACP | PETROLEUM RESISTANT |
| ABF | SOLVENT RESISTANT |
| ACM | WATER RESISTANT |
| ABN | WEATHER RESISTANT |
AARGDRELIABILITY INDICATOR
AN INDICATION THAT THE LEVEL OF PROBABILITY THAT AN ITEM WILL OPERATE WITHOUT FAILURE,AT A SPECIFIED RATED CAPABILITY,AT A SPECIFIED TEMPERATURE,AND FOR A SPECIFIED PERIOD OF TIME,HAS BEEN ESTABLISHED BY TESTING RANDOM SAMPLES OF PRODUCTION LOT.
Enter the applicable reply code from the table below
(AARGDE)
| Table 1 |
| Reply Code (AA61) | Reply |
| E | ESTABLISHED |
| N | NOT ESTABLISHED |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDEBX)
| Table 1 |
| Reply Code (AN47) | Reply |
| EBX | ADHESIVE COATING |
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDQD*;ENACDAK$DQH*;ENACDAK$$DQH*)
| Table 1 |
| Reply Code (EN02) | Reply |
| QD | HEXAVALENT CHROMIUM ALTERNATIVE |
| AK | NON-CADMIUM PRODUCT |
| QH | NON-LEAD ALTERNATIVE PRODUCTS |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CN | CUBIC INCHES |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAY)
| Table 1 |
| Reply Code (AM81) | Reply |
| AT | DOCK LEVEL HEATED WAREHOUSE |
| AX | DOCK LEVEL UNHEATED WAREHOUSE |
| AY | GENERAL PURPOSE HEATED WAREHOUSE |
| AS | GROUND LEVEL HEATED WAREHOUSE |
| AW | GROUND LEVEL UNHEATED WAREHOUSE |
CTSF*DPROTECTIVE STORAGE FEATURE
INDICATES THE STORAGE FEATURE/S/ REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(CTSFDAJ*;CTSFDAG$$DAG*)
| Table 1 |
| Reply Code (AD43) | Reply |
| AG | HUMIDITY CONTROLLED |
| AJ | SECURITY |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
BBRH*JINSPECTION FREQUENCY
THE SPECIFIED TIME INTERVAL,FROM RECEIPT,NECESSARY TO DETECT MATERIAL DETERIORATION THAT WILL AFFECT STOCK READINESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(BBRHJMHAB2*;BBRHJMHAB2$$JMHAB3*)
| Table 1 |
| Reply Code (AH68) | Reply |
| MH | MONTHS |
| YR | YEARS |
| Table 2 |
| Reply Code (AM82) | Reply |
| AB | FIRST INSPECTION |
| AC | REINSPECTION |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information