An item consisting of one or more ROCKET ENGINE or ROCKET MOTOR or ENGINE, TURBO-JET or ENGINE, RAMJET and a portion of the outer aerodynamic shell or skin of a GUIDED MISSILE (as modified) or a BOMB, GUIDED (as modified), designed to provide all or part of the thrust required to power the weapon's flight. May include either moveable control surface(s), steering jets, jet vane(s), or a combination of these, unless equipped with an articulated nozzle. May also have stabilizing fins, but only in combination with other controlling surfaces, jets, or the like. It is designed to mate with other guided missile section(s) or guided bomb sections. Addition of this to a BOMB, GUIDED (as modified) creates a GUIDED MISSILE (as modified). Excludes:ROCKET MOTOR; ROCKET MOTOR CLUSTER; and GUIDED MISSILE MAIN ASSEMBLAGE
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED61617*)
AXXDATHRUST CHAMBER QUANTITY
THE NUMBER OF THRUST CHAMBERS PROVIDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AXXDA10*)
AKDJDPRIME MOVER TYPE
INDICATES THE TYPE OF PRIME MOVER INCLUDED WITH THE UNIT.
Enter the applicable reply code from the table below
(AKDJDEG)
| Table 1 |
| Reply Code (AG27) | Reply |
| EG | RAMJET |
| DZ | ROCKET ENGINE |
| AA | ROCKET MOTOR |
| ED | TURBO-JET |
AQPF*DITEM CONTENT
AN INDICATION OF THE CONTENT OF THE ITEM.
Enter the applicable reply code from the table below
(AQPFDAAB)
| Table 1 |
| Reply Code (AL22) | Reply |
| AAB | EMPTY |
| AAJ | FILLED |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJMB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AXWY*DCOOLING SYSTEM TYPE
INDICATES THE TYPE OF COOLING SYSTEM FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AXWYDALG)
| Table 1 |
| Reply Code (AB75) | Reply |
| ALE | FILM |
| ALF | REGENERATIVE |
| ALG | REGENERATIVE FILM |
| ALH | TRANSPIRATION |
AXDH*DIGNITION TYPE
INDICATES THE TYPE OF IGNITION UTILIZED BY THE ITEM.
Enter the applicable reply code from the table below
(AXDHDAAN)
| Table 1 |
| Reply Code (AJ53) | Reply |
| AAL | ELECTRICAL |
| AAM | PYROTECHNIC |
| AAN | SPONTANEOUS |
AWBG*DIGNITER INSTALLATION
AN INDICATION OF WHETHER OR NOT THE IGNITER IS INSTALLED.
Enter the applicable reply code from the table below
(AWBGDP)
| Table 1 |
| Reply Code (AL24) | Reply |
| P | INSTALLED |
| M | NOT INSTALLED |
AWBJ*AIGNITER MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE IGNITER.
Enter the alpha-numeric reply with a minimum of one character.
(AWBJAV8)
AWBK*DCABLE ASSEMBLY CONNECTOR TYPE
INDICATES THE TYPE OF CABLE ASSEMBLY CONNECTOR PROVIDED.
Enter the applicable reply code from the table below
(AWBKDAAG)
| Table 1 |
| Reply Code (AJ57) | Reply |
| AAF | AN |
| AAJ | HOUSEHOLD |
| AAK | INTEGRAL CONTACT |
| AAG | JACK PLUG |
| AAL | TWO-PRONG SPECIAL |
ATSP*ACABLE ASSEMBLY MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE CABLE ASSEMBLY.
Enter the alpha-numeric reply with a minimum of one character.
(ATSPAX3)
AWBL*BNOMINAL BURNING TIME IN SECONDS
THE NOMINAL PERIOD OF BURNING TIME,EXPRESSED IN SECONDS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AWBLB2.0)
AWBM*JNOMINAL THRUST
THE NOMINAL FORCE OF ENERGY EXPENDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWBMJAJ2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
AWBP*BNOZZLE CANT ANGLE IN DEG
THE CANT ANGLE OF THE NOZZLE,EXPRESSED IN DEGREES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AWBPB2.0)
ATSG*AMOTOR PROPELLANT GRAIN QUANTITY
THE NUMBER OF MOTOR PROPELLANT GRAINS INCLUDED.
Enter the numeric reply with a minimum of one digit.
(ATSGA10*)
ATSJ*AMOTOR PROPELLANT GRAIN MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE MOTOR PROPELLANT GRAIN.
Enter the alpha-numeric reply with a minimum of one character.
(ATSJAJ1)
ATSH*DMOTOR PROPELLANT MATERIAL
THE ELEMENT,COMPOUND,OR MIXTURE OF WHICH THE MOTOR PROPELLANT IS FABRICATED.
Enter the applicable reply code from the table below
(ATSHDHM)
| Table 1 |
| Reply Code (AF45) | Reply |
| GL | A2 |
| GM | A-2 BLACK POWDER |
| GN | ADC-F-1 |
| GP | AEROPLEX AN583AF |
| GQ | AEROPLEX AN584 |
| GR | ALCLO PELLET |
| GS | ALPO POWDER |
| GW | ALUMINUM NITRATE, AMMONIUM DICHROMATE, RUBBER AND COMPOUNDING INGREDIENTS |
| GT | ALUMINUM POTASSIUM PERCHLORATE POWDER |
| GX | AMMONIUM NITRATE, MALORI BLUE AND COMPOUNDING INGREDIENTS |
| GY | AMMONIUM NITRATE, RUBBER, MALORI BLUE AND COMPOUNDING INGREDIENTS |
| GZ | AMMONIUM PERCHLORATE |
| HA | AMMONIUM PERCHLORATE-POLYSULFIDE |
| HB | AMMONIUM PERCHLORATE-POLYSULFIDE, RUBBER |
| HC | AMMONIUM PERCHLORATE-POLYSULFIDE, T-35 |
| HD | ARCITE 340A |
| HE | ARCITE 362M |
| HF | ARCITE 377A |
| HG | BALLISTITE |
| HH | BARATOL |
| HJ | BARIUM NITRATE |
| HK | BARIUM NITRATE AND TNT |
| HL | BKN03 |
| DE | BLACK POWDER |
| RP | BLACK POWDER, CANNON GRADE |
| HM | BLACK POWDER, FFFG SIZE GRANULATION |
| HN | BORON |
| HP | BORON PELLETS |
| RN | BORON-POTASSIUM NITRATE |
| RQ | CANNON POWDER |
| AJ | CHAFF |
| SB | CHEMICAL AGENT |
| AM | COMPOSITION B |
| DM | COMPOSITION B4 |
| HQ | COMPOSITION B-4 CANNON GRADE BLACK POWDER |
| HR | COMPOSITION N-4 CANNON POWDER |
| HS | COMPOSITION N-5 |
| DN | CONCRETE |
| RH | CUMENE HYDROPEROXIDE |
| DQ | CYCLOTOL |
| HW | DDP 80 |
| RJ | ETHYL, CELLULOSE |
| DW | EXPLOSIVE D |
| DY | H-6 |
| HX | HBX |
| HY | HBX-1 |
| DZ | HBX-3 |
| RK | INERT FILLED |
| AX | INERT MATERIAL |
| HZ | M-7 SMOKELESS POWDER |
| BA | MAGNESIUM |
| RT | MAGNESIUM CARBONATE, MIL-M-11361, GRADE B |
| JA | MAGNESIUM REACTIVE MIXTURE |
| JB | MFRS SECRET |
| JC | NITROCELLULOSE |
| RY | NITROCELLULOSE, MIL-N-244, GRADE D, ACETONE, O-A-51 |
| RZ | O-CHLOROBENZALMALONITRILE |
| RW | O-CHLOROBENZALMALONITRILE, SUGAR, JJJ-S-791, TYPE 1, CLASS B |
| JD | OCTOL |
| RM | PARAPLEX P-10 RESIN |
| KJ | PBX (PLASTIC BONDED EXPLOSIVE) |
| JE | PERCHLORATE OXIDE AND PLASTIC-RESIN |
| JF | PLASTER |
| JG | PLASTIC |
| RR | PLASTIC, POLYTETRAFLUOROETHYLENE |
| JH | POLYSULFIDE POLYMER |
| JJ | POLYVINYL CHLORIDE |
| RX | POTASSIUM CHLORATE, MIL-P-150, CLASS 7, GRADE B |
| JK | POTASSIUM NITRATE |
| NQ | POTASSIUM PERCHLORATE |
| JL | POTASSIUM PERCHLORATE OXIDIZER AND PLASTIC-RESIN |
| JM | PROPELLANT M-9 |
| JN | PROPELLANT POWDER |
| JP | RFD FORMULATION B-120 |
| JQ | RFD FORMULATION S-6A |
| JR | SIMULANT FILLER |
| ND | SMOKELESS POWDER |
| JS | SMOKELESS POWDER AND OGK |
| JT | SOLID DOUBLE BASE PROPELLANT EXTRUDED |
| JW | SOLVENTLESS DOUBLE BASE PROPELLANT |
| JY | TM SHEET POWDER 0.012 |
| JX | TMS |
| RS | TP-H8047 |
| JZ | TP-L-3006A |
| KA | TRIETHYALUMINUM |
| BP | TRINITROTOLUENE, TNT |
| KB | U.S. FLARE CORP, TYPE 20 |
| SA | U.S. FLARE CORP, TYPE 2D, MFR SECRET |
| BS | WHITE PHOSPHORUS |
| KC | WOOD |
| RL | WOOD, INERT LOADED |
AWBH*DPROPELLANT ACCOMMODATION TYPE
INDICATES THE TYPE OF PROPELLANT THAT THE ITEM WILL ACCOMMODATE.
Enter the applicable reply code from the table below
(AWBHDAR)
| Table 1 |
| Reply Code (AM33) | Reply |
| AB | ARCITE 377 |
| AC | CASE BONDED SOLID |
| AD | CAST |
| BK | CAST IN CASE |
| AE | CAST, CASE BONDED |
| AF | CAST, DOUBLE-BASED SOLID |
| AG | DOUBLE BASE |
| AH | DOUBLE BASE-SHEET SOLID |
| AK | EXTERNAL STAR, EXTRUDED |
| AJ | EXTERNAL-CRUCIFORM, EXTRUDED |
| AM | EXTRUDED COMPOSITE SOLID |
| AN | EXTRUDED CRUCIFORM SOLID |
| AP | EXTRUDED CYLINDER SOLID BASE |
| AQ | EXTRUDED CYLINDER SOLID BASE W/INTERNAL LONGITUDINAL STAR |
| AR | EXTRUDED CYLINDER SOLID W/INTERNAL STAR-SHAPED LONGITUDINAL CAVITY |
| AS | EXTRUDED DOUBLE-BASE SOLID |
| BN | EXTRUDED DOUBLE-BASE SOLID W/INTERNAL STAR-SHAPED LONGITUDINAL CAVITY |
| AT | EXTRUDED DOUBLE-BASE SOLID W/LONGITUDINAL TRIFORM PERFORATION |
| BQ | EXTRUDED DOUBLE-BASE, SOLID, CARPET ROLL, W/INTERNAL STAR-SHAPED LONGITUDINAL CAVITY |
| AW | EXTRUDED INTERNAL STAR SOLID |
| BP | EXTRUDED SINGLE-BASE PERFORATED |
| AX | EXTRUDED SINGLE-BASE SOLID |
| AL | EXTRUDED SOLID |
| BA | INTERAL-EXTERNAL RIBBED CYLINDER, EXTRUDED |
| BB | INTERNAL STAR, EXTRUDED |
| AY | INTERNAL-EXTERNAL CYLINDER |
| AZ | INTERNAL-EXTERNAL, EXTRUDED |
| BR | INTERNAL-EXTERNAL-CYLINDER, EXTRUDED |
| BC | N-5 |
| BD | PERCHLORATE CAST W/BINDER FUEL OTHER THAN ASPHALT SOLID |
| BE | SINGLE-BASE SOLID |
| BF | SOLID |
| BS | SOLID CYLINDRICAL |
| BL | SOLID CYLINDRICAL W/LONGITUDINAL PERFORATION |
| BM | SOLID CYLINDRICAL W/MONO-PERFORATED EXTRUDED GRAINS |
| BG | SOLID CYLINDRICAL W/TAPERED ENDS, LONGITUDINAL PERFORATION-LONGITUDINAL SLOT |
| BH | SOLID CYLINDRICAL W/TAPERED ENDS, LONGITUDINAL SLOT |
| BJ | TWO CYLINDRICAL W/LONGITUDINAL PERFORATION-ONE CYLINDRICAL SOLID |
ATSK*JMOTOR PROPELLANT GRAIN WEIGHT
THE TOTAL WEIGHT OF THE MOTOR PROPELLANT GRAINS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATSKJAS2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
AWBR*DINTEGRAL STABILIZATION METHOD
THE INTEGRAL MEANS UTILIZED TO STABILIZE THE ITEM.
Enter the applicable reply code from the table below
(AWBRDAB)
| Table 1 |
| Reply Code (AM34) | Reply |
| AB | FIN |
| AC | SPIN |
AWBS*DINTEGRAL THRUST DIRECTION CONTROL METHOD
THE INTEGRAL MEANS UTILIZED TO CONTROL THE DIRECTION OF THRUST.
Enter the applicable reply code from the table below
(AWBSDABB)
| Table 1 |
| Reply Code (AL28) | Reply |
| AAP | AERODYNAMIC |
| AAZ | GIMBLE THRUST VECTOR |
| AAR | GIMBLE VECTOR |
| ABA | HINGED THRUST VECTOR |
| AAQ | JET VANE |
| ABB | JET VANE THRUST VECTOR |
| ACD | SLOW SPIN TO CANCEL THRUST MISALIGNMENT |
ANNY*AQUANTITY WITHIN EACH IMMEDIATE CONTAINER
THE NUMBER OF ITEMS WITHIN EACH IMMEDIATE CONTAINER.
Enter the alpha-numeric reply with a minimum of one character.
(ANNYAV0)
DDAC*ADOD AMMUNITION CODE
A NINE /9/ CHARACTER SEMISIGNIFICANT NUMBER DIVIDED INTO TWO PARTS BY A HYPHEN CENTRALLY ASSIGNED TO GENERIC DESCRIPTIONS APPLICABLE TO ITEMS OF SUPPLY IN FSG 13 AND 14.
Enter the applicable code.
(DDACA1340-H725*)
AMWN*AMODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AMWNAP3)
ALXZ*GSPECIFIC USAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALXZGCLEARTEXT)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBGJ)
| Table 1 |
| Reply Code (AN47) | Reply |
| BGJ | CABLE ASSEMBLY |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
AYBE*JENGINE OVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF THE ENGINE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AYBEJMA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AYBF*JENGINE OVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ENGINE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AYBFJMA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AYBG*JENGINE OVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE ENGINE,IN DISTICTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AYBGJMC2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAF7)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAN4)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG4)
| Table 1 |
| Reply Code (EN02) | Reply |
| G4 | COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS |
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAUA000)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRTA000F2.0*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAUA000TEXT1234*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
HMCC*JHAZARDOUS MATERIAL CLASSIFICATION CODE
AN ALPHA-NUMERIC CODE IDENTIFYING A GROUP OR CLASSIFICATION OF VARIOUS MATERIALS AS TO THEIR POTENTIAL TO CAUSE EXPLOSIONS,FIRES OR DAMAGE BY CHEMICAL ACTION.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(HMCCJAKTEXT1234*)
| Table 1 |
| Reply Code (AP66) | Reply |
| AB | COAST GUARD CLASS |
| AC | DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION |
| AD | DEPARTMENT OF TRANSPORTATION CLASS |
| AF | FIREFIGHTING GROUP |
| AH | INHABITED BUILDING DISTANCE |
| AK | STORAGE COMPATIBILITY GROUP |
SHPN*ADOT PROPER SHIPPING NAME
THE PROPER SHIPPING NAME AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
Enter the alpha-numeric reply with a minimum of one character.
(SHPNAF0)
DTRC*ADOT REGISTRATION CODE
AN ALPHA-NUMERIC CODE ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION IDENTIFYING THE FINAL HAZARD CLASSIFICATION.
Enter the alpha-numeric reply with a minimum of one character.
(DTRCAG8)
DENN*ADOT IDENTIFICATION NUMBER
THE IDENTIFICATION NUMBER ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PROPER SHIPPING NAME. IDENTIFICATION NUMBERS PRECEDED BY THE LETTERS "UN" ARE ASSOCIATED WITH INTERNATIONAL AS WELL AS DOMESTIC TRANSPORTATION AND THOSE PRECEDED BY THE LETTERS "NA" ARE NOT RECOGNIZED FOR INTERNATIONAL TRANSPORTATION OF HAZARDOUS MATERIALS (DANGEROUS GOODS) EXCEPT TO AND FROM THE UNITED STATES AND CANADA.
Enter the alpha-numeric reply with a minimum of one character.
(DENNAB4)
EXWT*JNET EXPLOSIVE WEIGHT
THE NET WEIGHT OF THE EXPLOSIVE CONTENT OF THE ITEM FOR TRANSPORTATION AND/OR STORAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(EXWTJBBRAS2.0*)
| Table 1 |
| Reply Code (AH21) | Reply |
| BBQ | STORAGE |
| BBR | TRANSPORTATION |
| Table 2 |
| Reply Code (AG67) | Reply |
| AS | POUNDS |
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
HAZD*ADOT HAZARD CLASS/DIVISION
A DESIGNATION OF THE HAZARD CLASS OR DIVISION CORRESPONDING TO EACH PROPER SHIPPING NAME FOR HAZARDOUS MATERIAL AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
Enter the alpha-numeric reply with a minimum of one character.
(HAZDAF0)
GRWT*JGROSS WEIGHT
THE COMBINED WEIGHT OF THE ITEM AND ITS LOADED CONTENTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(GRWTJEBAS2.0*)
| Table 1 |
| Reply Code (AD28) | Reply |
| EB | SHIPPING CONTAINER |
| Table 2 |
| Reply Code (AG67) | Reply |
| AS | POUNDS |
CTKG*JPACKAGE NOMINAL OVERALL WIDTH AND TYPE
THE NOMINAL OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE PACKAGE,IN DISTINCTION FROM THICKNESS,AND THE TYPE OF PACKAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTKGJAEB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| Table 2 |
| Reply Code (AD28) | Reply |
| EB | SHIPPING CONTAINER |
CTJT*JPACKAGE NOMINAL OVERALL LENGTH AND TYPE
THE NOMINAL DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS,AND THE TYPE OF PACKAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTJTJAEB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| Table 2 |
| Reply Code (AD28) | Reply |
| EB | SHIPPING CONTAINER |
CTHR*JPACKAGE NOMINAL OVERALL HEIGHT AND TYPE
THE NOMINAL DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP,AND THE TYPE OF PACKAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTHRJAEB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| Table 2 |
| Reply Code (AD28) | Reply |
| EB | SHIPPING CONTAINER |
BBRJ*DSPECIAL HANDLING FEATURE
THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.
Enter the applicable reply code from the table below
(BBRJDAC)
| Table 1 |
| Reply Code (AM83) | Reply |
| AC | EXPLOSIVE |
PKRN*APACKAGE REFERENCE NUMBER
AN ALPHA-NUMERIC CODE IDENTIFYING THE DRAWING AND/OR SPECIFICATION WHICH CONTROLS THE LOADING OF THE PACKAGE.
Enter the alpha-numeric reply with a minimum of one character.
(PKRNAQ3)
SERN*AUN ORGANIZATION SERIAL NUMBER
AN INTERNATIONAL CODE ASSIGNED WITHIN THE UNITED NATION ORGANIZATION TO DESIGNATE THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(SERNAE1)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information