A supersonic guided missile specifically designed to intercept and destroy aerial targets such as aircraft, guided missiles, rockets, warheads, warhead sections, and the like. Excludes:items whose trajectory cannot be altered in flight.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED61587*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEMDMGA000*;MATT3AEMDMGA000$DSTA000*;MATT3AEMDMGA000$$DSTA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEM | HEAD |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| MGA000 | MAGNESIUM |
| STA000 | STEEL |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC ATSB, YOU MUST ANSWER MRC (AMTR)
ATSBDNOSE FUZE
AN INDICATION OF WHETHER OR NOT A NOSE FUZE IS INCLUDED. PLEASE USE MRC ABFF.
Enter the applicable reply code from the table below
(ATSBDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AMTR*ANOSE FUZE MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE NOSE FUZE.
Enter the alpha-numeric reply with a minimum of one character.
(AMTRAT6)
ATSA*AHEAD MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE HEAD.
Enter the alpha-numeric reply with a minimum of one character.
(ATSAAE8)
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC ATSD, YOU MUST ANSWER MRC (AMTS)
ATSDDBASE FUZE
AN INDICATION OF WHETHER OR NOT A BASE FUZE IS INCLUDED. PLEASE USE MRC ABFF.
Enter the applicable reply code from the table below
(ATSDDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AMTS*ABASE FUZE MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE BASE FUZE.
Enter the alpha-numeric reply with a minimum of one character.
(AMTSAJ8)
AHVJDSUPPLEMENTARY CHARGE
AN INDICATION OF WHETHER OR NOT A SUPPLEMENTARY CHARGE IS INCLUDED. PLEASE USE MRC ABFF.
Enter the applicable reply code from the table below
(AHVJDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ATSFDMOTOR SIZE DESIGNATION
A DESIGNATION INDICATING THE SIZE BY WHICH THE MOTOR IS COMMERCIALLY KNOWN.
Enter the applicable reply code from the table below
(ATSFDJHQ)
| Table 1 |
| Reply Code (AF81) | Reply |
| BBF | 1.25 INCH |
| EGW | 1.500 INCH |
| EGX | 1.690 INCH |
| EGY | 1.750 INCH |
| BBY | 11.75 INCH |
| JHP | 110 MILLIMETER |
| BCC | 115 MILLIMETER |
| JTZ | 127 MILLIMETER |
| EGS | 17 MILLIMETER |
| JUA | 183 MILLIMETER |
| EGZ | 2 INCH |
| BBG | 2.25 INCH |
| EHA | 2.375 INCH |
| EGT | 2.5 INCH |
| BBH | 2.75 INCH |
| BBJ | 2.9 INCH |
| BBK | 3 INCH |
| BBL | 3.25 INCH |
| BBM | 3.45 INCH |
| CWB | 3.5 INCH |
| BBN | 3.845 INCH |
| BCD | 318 MILLIMETER |
| JUB | 324 MILLIMETER |
| BBZ | 33.605 INCH |
| JWH | 344 MILLIMETER |
| JHQ | 375 MILLIMETER |
| BBP | 4.5 INCH |
| JTX | 42 MILLIMETER |
| JUC | 480 MILLIMETER |
| BBQ | 5 INCH |
| BBR | 5.111 INCH |
| BBS | 5.25 INCH |
| BBT | 5.475 INCH |
| JTY | 50 MILLIMETER |
| JUD | 533 MILLIMETER |
| BBW | 6.264 INCH |
| BCA | 66 MILLIMETER |
| BBX | 7.2 INCH |
| AYT | 76 MILLIMETER |
| BCE | 762 MILLIMETER |
| AYD | 8.0 INCH |
| BCB | 80 MILLIMETER |
ATSLDCABLE ASSEMBLY
AN INDICATION OF WHETHER OR NOT A CABLE ASSEMBLY IS INCLUDED. PLEASE USE MRC ABFF.
Enter the applicable reply code from the table below
(ATSLDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ATSMDHEAD TO MOTOR ASSEMBLY
AN INDICATION OF WHETHER OR NOT THE HEAD IS ASSEMBLED TO THE MOTOR.
Enter the applicable reply code from the table below
(ATSMDM)
| Table 1 |
| Reply Code (AM27) | Reply |
| P | ASSEMBLED |
| M | NOT ASSEMBLED |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC AWBB, YOU MUST ANSWER MRC (AWBC)
AWBBDEXPENDABLE LAUNCHER
AN INDICATION OF WHETHER OR NOT AN EXPENDABLE LAUNCHER IS PROVIDED. PLEASE USE MRC ABFF.
Enter the applicable reply code from the table below
(AWBBDC)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
AWBC*AEXPENDABLE LAUNCHER MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE EXPENDABLE LAUNCHER.
Enter the alpha-numeric reply with a minimum of one character.
(AWBCAR1)
DDACADOD AMMUNITION CODE
A NINE /9/ CHARACTER SEMISIGNIFICANT NUMBER DIVIDED INTO TWO PARTS BY A HYPHEN CENTRALLY ASSIGNED TO GENERIC DESCRIPTIONS APPLICABLE TO ITEMS OF SUPPLY IN FSG 13 AND 14.
Enter the applicable code.
(DDACA1340-H725*)
ATNBDHEAD LOAD TYPE
INDICATES THE TYPE OF LOAD IN THE HEAD.
Enter the applicable reply code from the table below
(ATNBDAD*;ATNBDAB$DAE*;ATNBDAB$$DAE*)
| Table 1 |
| Reply Code (AM25) | Reply |
| AB | EMPTY |
| AC | EXPLOSIVE |
| AD | INERT |
| AE | SOLID SLUG |
ANHA*DFILLER MATERIAL
THE ELEMENT,COMPOUND,OR MIXTURE OF THE FILLER MATERIAL.
Enter the applicable reply code from the table below
(ANHADHH*;ANHADJS$DHM*;ANHADJS$$DHM*)
| Table 1 |
| Reply Code (AF45) | Reply |
| GL | A2 |
| GM | A-2 BLACK POWDER |
| GN | ADC-F-1 |
| GP | AEROPLEX AN583AF |
| GQ | AEROPLEX AN584 |
| GR | ALCLO PELLET |
| GS | ALPO POWDER |
| GW | ALUMINUM NITRATE, AMMONIUM DICHROMATE, RUBBER AND COMPOUNDING INGREDIENTS |
| GT | ALUMINUM POTASSIUM PERCHLORATE POWDER |
| GX | AMMONIUM NITRATE, MALORI BLUE AND COMPOUNDING INGREDIENTS |
| GY | AMMONIUM NITRATE, RUBBER, MALORI BLUE AND COMPOUNDING INGREDIENTS |
| GZ | AMMONIUM PERCHLORATE |
| HA | AMMONIUM PERCHLORATE-POLYSULFIDE |
| HB | AMMONIUM PERCHLORATE-POLYSULFIDE, RUBBER |
| HC | AMMONIUM PERCHLORATE-POLYSULFIDE, T-35 |
| HD | ARCITE 340A |
| HE | ARCITE 362M |
| HF | ARCITE 377A |
| HG | BALLISTITE |
| HH | BARATOL |
| HJ | BARIUM NITRATE |
| HK | BARIUM NITRATE AND TNT |
| HL | BKN03 |
| DE | BLACK POWDER |
| RP | BLACK POWDER, CANNON GRADE |
| HM | BLACK POWDER, FFFG SIZE GRANULATION |
| HN | BORON |
| HP | BORON PELLETS |
| RN | BORON-POTASSIUM NITRATE |
| RQ | CANNON POWDER |
| AJ | CHAFF |
| SB | CHEMICAL AGENT |
| AM | COMPOSITION B |
| DM | COMPOSITION B4 |
| HQ | COMPOSITION B-4 CANNON GRADE BLACK POWDER |
| HR | COMPOSITION N-4 CANNON POWDER |
| HS | COMPOSITION N-5 |
| DN | CONCRETE |
| RH | CUMENE HYDROPEROXIDE |
| DQ | CYCLOTOL |
| HW | DDP 80 |
| PV | DESTEX |
| RJ | ETHYL, CELLULOSE |
| DW | EXPLOSIVE D |
| DY | H-6 |
| HX | HBX |
| AFE | HBX-1 |
| HY | HBX-1 |
| DZ | HBX-3 |
| RK | INERT FILLED |
| AX | INERT MATERIAL |
| HZ | M-7 SMOKELESS POWDER |
| BA | MAGNESIUM |
| RT | MAGNESIUM CARBONATE, MIL-M-11361, GRADE B |
| JA | MAGNESIUM REACTIVE MIXTURE |
| JB | MFRS SECRET |
| JC | NITROCELLULOSE |
| RY | NITROCELLULOSE, MIL-N-244, GRADE D, ACETONE, O-A-51 |
| RZ | O-CHLOROBENZALMALONITRILE |
| RW | O-CHLOROBENZALMALONITRILE, SUGAR, JJJ-S-791, TYPE 1, CLASS B |
| JD | OCTOL |
| RM | PARAPLEX P-10 RESIN |
| KJ | PBX (PLASTIC BONDED EXPLOSIVE) |
| ABF | PBX(AF)108 |
| SU | PBXN-3 |
| JE | PERCHLORATE OXIDE AND PLASTIC-RESIN |
| JF | PLASTER |
| JG | PLASTIC |
| RR | PLASTIC, POLYTETRAFLUOROETHYLENE |
| JH | POLYSULFIDE POLYMER |
| JJ | POLYVINYL CHLORIDE |
| RX | POTASSIUM CHLORATE, MIL-P-150, CLASS 7, GRADE B |
| JK | POTASSIUM NITRATE |
| NQ | POTASSIUM PERCHLORATE |
| JL | POTASSIUM PERCHLORATE OXIDIZER AND PLASTIC-RESIN |
| JM | PROPELLANT M-9 |
| JN | PROPELLANT POWDER |
| JP | RFD FORMULATION B-120 |
| JQ | RFD FORMULATION S-6A |
| JR | SIMULANT FILLER |
| ND | SMOKELESS POWDER |
| JS | SMOKELESS POWDER AND OGK |
| JT | SOLID DOUBLE BASE PROPELLANT EXTRUDED |
| JW | SOLVENTLESS DOUBLE BASE PROPELLANT |
| JY | TM SHEET POWDER 0.012 |
| JX | TMS |
| RS | TP-H8047 |
| JZ | TP-L-3006A |
| KA | TRIETHYALUMINUM |
| BP | TRINITROTOLUENE, TNT |
| KB | U.S. FLARE CORP, TYPE 20 |
| SA | U.S. FLARE CORP, TYPE 2D, MFR SECRET |
| BS | WHITE PHOSPHORUS |
| KC | WOOD |
| RL | WOOD, INERT LOADED |
ASKJ*ACHEMICAL CORPS SYMBOL
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED CHEMICAL CORPS SYMBOL.
Enter the alpha-numeric reply with a minimum of one character.
(ASKJAV6)
AJGD*DHEAD TYPE
INDICATES THE TYPE OF HEAD PROVIDED.
Enter the applicable reply code from the table below
(AJGDDMS*;AJGDDMR$DAED*)
| Table 1 |
| Reply Code (AE98) | Reply |
| MR | ANTIAIRCRAFT |
| ADH | ANTISUBMARINE |
| ABW | ANTITANK |
| MS | ARMOR PIERCING |
| ADG | DECOY |
| MT | GENERAL PURPOSE |
| AAR | LEAFLET |
| AEC | MINE EXPELLING |
| ABY | PRACTICE |
| AED | RADAR TARGET |
| AEE | SMOKE |
| ABX | SMOKE, CHEMICAL WP |
AQRP*JFILLER MATERIAL WEIGHT
A RELATIVE MEASURE OF THE MASS OF THE FILLER MATERIAL WITH RESPECT TO ITS DENSITY.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQRPJOZ2.0*)
| Table 1 |
| Reply Code (AB16) | Reply |
| GR | GRAINS |
| GM | GRAMS |
| KL | KILOGRAMS |
| OZ | OUNCES |
| LB | POUNDS |
AWBR*DINTEGRAL STABILIZATION METHOD
THE INTEGRAL MEANS UTILIZED TO STABILIZE THE ITEM.
Enter the applicable reply code from the table below
(AWBRDAC*;AWBRDAB$DAB*)
| Table 1 |
| Reply Code (AM34) | Reply |
| AB | FIN |
| AC | SPIN |
ATSC*AMOTOR MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE MOTOR.
Enter the alpha-numeric reply with a minimum of one character.
(ATSCAD8)
ATSG*AMOTOR PROPELLANT GRAIN QUANTITY
THE NUMBER OF MOTOR PROPELLANT GRAINS INCLUDED.
Enter the numeric reply with a minimum of one digit.
(ATSGA10*)
ATSH*DMOTOR PROPELLANT MATERIAL
THE ELEMENT,COMPOUND,OR MIXTURE OF WHICH THE MOTOR PROPELLANT IS FABRICATED.
Enter the applicable reply code from the table below
(ATSHDSB)
| Table 1 |
| Reply Code (AF45) | Reply |
| GL | A2 |
| GM | A-2 BLACK POWDER |
| GN | ADC-F-1 |
| GP | AEROPLEX AN583AF |
| GQ | AEROPLEX AN584 |
| GR | ALCLO PELLET |
| GS | ALPO POWDER |
| GW | ALUMINUM NITRATE, AMMONIUM DICHROMATE, RUBBER AND COMPOUNDING INGREDIENTS |
| GT | ALUMINUM POTASSIUM PERCHLORATE POWDER |
| GX | AMMONIUM NITRATE, MALORI BLUE AND COMPOUNDING INGREDIENTS |
| GY | AMMONIUM NITRATE, RUBBER, MALORI BLUE AND COMPOUNDING INGREDIENTS |
| GZ | AMMONIUM PERCHLORATE |
| HA | AMMONIUM PERCHLORATE-POLYSULFIDE |
| HB | AMMONIUM PERCHLORATE-POLYSULFIDE, RUBBER |
| HC | AMMONIUM PERCHLORATE-POLYSULFIDE, T-35 |
| HD | ARCITE 340A |
| HE | ARCITE 362M |
| HF | ARCITE 377A |
| HG | BALLISTITE |
| HH | BARATOL |
| HJ | BARIUM NITRATE |
| HK | BARIUM NITRATE AND TNT |
| HL | BKN03 |
| DE | BLACK POWDER |
| RP | BLACK POWDER, CANNON GRADE |
| HM | BLACK POWDER, FFFG SIZE GRANULATION |
| HN | BORON |
| HP | BORON PELLETS |
| RN | BORON-POTASSIUM NITRATE |
| RQ | CANNON POWDER |
| AJ | CHAFF |
| SB | CHEMICAL AGENT |
| AM | COMPOSITION B |
| DM | COMPOSITION B4 |
| HQ | COMPOSITION B-4 CANNON GRADE BLACK POWDER |
| HR | COMPOSITION N-4 CANNON POWDER |
| HS | COMPOSITION N-5 |
| DN | CONCRETE |
| RH | CUMENE HYDROPEROXIDE |
| DQ | CYCLOTOL |
| HW | DDP 80 |
| RJ | ETHYL, CELLULOSE |
| DW | EXPLOSIVE D |
| DY | H-6 |
| HX | HBX |
| HY | HBX-1 |
| DZ | HBX-3 |
| RK | INERT FILLED |
| AX | INERT MATERIAL |
| HZ | M-7 SMOKELESS POWDER |
| BA | MAGNESIUM |
| RT | MAGNESIUM CARBONATE, MIL-M-11361, GRADE B |
| JA | MAGNESIUM REACTIVE MIXTURE |
| JB | MFRS SECRET |
| JC | NITROCELLULOSE |
| RY | NITROCELLULOSE, MIL-N-244, GRADE D, ACETONE, O-A-51 |
| RZ | O-CHLOROBENZALMALONITRILE |
| RW | O-CHLOROBENZALMALONITRILE, SUGAR, JJJ-S-791, TYPE 1, CLASS B |
| JD | OCTOL |
| RM | PARAPLEX P-10 RESIN |
| KJ | PBX (PLASTIC BONDED EXPLOSIVE) |
| JE | PERCHLORATE OXIDE AND PLASTIC-RESIN |
| JF | PLASTER |
| JG | PLASTIC |
| RR | PLASTIC, POLYTETRAFLUOROETHYLENE |
| JH | POLYSULFIDE POLYMER |
| JJ | POLYVINYL CHLORIDE |
| RX | POTASSIUM CHLORATE, MIL-P-150, CLASS 7, GRADE B |
| JK | POTASSIUM NITRATE |
| NQ | POTASSIUM PERCHLORATE |
| JL | POTASSIUM PERCHLORATE OXIDIZER AND PLASTIC-RESIN |
| JM | PROPELLANT M-9 |
| JN | PROPELLANT POWDER |
| JP | RFD FORMULATION B-120 |
| JQ | RFD FORMULATION S-6A |
| JR | SIMULANT FILLER |
| ND | SMOKELESS POWDER |
| JS | SMOKELESS POWDER AND OGK |
| JT | SOLID DOUBLE BASE PROPELLANT EXTRUDED |
| JW | SOLVENTLESS DOUBLE BASE PROPELLANT |
| JY | TM SHEET POWDER 0.012 |
| JX | TMS |
| RS | TP-H8047 |
| JZ | TP-L-3006A |
| KA | TRIETHYALUMINUM |
| BP | TRINITROTOLUENE, TNT |
| KB | U.S. FLARE CORP, TYPE 20 |
| SA | U.S. FLARE CORP, TYPE 2D, MFR SECRET |
| BS | WHITE PHOSPHORUS |
| KC | WOOD |
| RL | WOOD, INERT LOADED |
ATSJ*AMOTOR PROPELLANT GRAIN MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE MOTOR PROPELLANT GRAIN.
Enter the alpha-numeric reply with a minimum of one character.
(ATSJAQ4)
ATSK*JMOTOR PROPELLANT GRAIN WEIGHT
THE TOTAL WEIGHT OF THE MOTOR PROPELLANT GRAINS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ATSKJAS2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
AWBK*DCABLE ASSEMBLY CONNECTOR TYPE
INDICATES THE TYPE OF CABLE ASSEMBLY CONNECTOR PROVIDED.
Enter the applicable reply code from the table below
(AWBKDAAJ*;AWBKDAAF$DAAH*)
| Table 1 |
| Reply Code (AJ57) | Reply |
| AAH | 2-PRONG PLUG |
| AAF | AN |
| ANP | CONTACT-SPRING |
| AAJ | HOUSEHOLD |
| AAK | INTEGRAL CONTACT |
| AAG | JACK PLUG |
| ANQ | MULTIPLE-PRONG CONTACT |
| AAL | TWO-PRONG SPECIAL |
ATSP*ACABLE ASSEMBLY MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE CABLE ASSEMBLY.
Enter the alpha-numeric reply with a minimum of one character.
(ATSPAB2)
AJYJ*APACKAGE MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE PACKAGE. PLEASE USE MRC AMWN IN PLACE OF THIS DISCONTINUED MRC.
Enter the alpha-numeric reply with a minimum of one character.
(AJYJAQ0)
AMWN*AMODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AMWNAQ6)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
GRWT*JGROSS WEIGHT
THE COMBINED WEIGHT OF THE ITEM AND ITS LOADED CONTENTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(GRWTJEFAS2.0*;GRWTJEFAS2.0$$JEFAS2.1*)
| Table 1 |
| Reply Code (AD28) | Reply |
| AR | PALLET |
| EJ | PALLET DOMESTIC, US NAVY |
| EK | PALLET FLEET, US NAVY |
| ED | PALLET, US AIR FORCE |
| EE | PALLET, US ARMY |
| EF | PALLET, US MARINE CORPS |
| EB | SHIPPING CONTAINER |
| Table 2 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
CZKA*JPACKAGE REFERENCE NUMBER
AN ALPHA-NUMERIC CODE IDENTIFYING THE DRAWING AND/OR SPECIFICATION WHICH CONTROLS THE LOADING OF THE PACKAGE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CZKAJACTEXT1234*;CZKAJACTEXT1234$$JACTEXT1234*)
| Table 1 |
| Reply Code (AF94) | Reply |
| AB | US AIR FORCE |
| AC | US ARMY |
| AD | US MARINE CORPS |
| AE | US NAVY |
EXWT*JNET EXPLOSIVE WEIGHT
THE NET WEIGHT OF THE EXPLOSIVE CONTENT OF THE ITEM FOR TRANSPORTATION AND/OR STORAGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(EXWTJBBQAJ2.0*;EXWTJBBQAJ2.0$$JBBQAJ2.1*)
| Table 1 |
| Reply Code (AH21) | Reply |
| BBQ | STORAGE |
| BBR | TRANSPORTATION |
| Table 2 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
HMCC*JHAZARDOUS MATERIAL CLASSIFICATION CODE
AN ALPHA-NUMERIC CODE IDENTIFYING A GROUP OR CLASSIFICATION OF VARIOUS MATERIALS AS TO THEIR POTENTIAL TO CAUSE EXPLOSIONS,FIRES OR DAMAGE BY CHEMICAL ACTION.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(HMCCJAGTEXT1234*;HMCCJAGTEXT1234$$JAGTEXT1234*)
| Table 1 |
| Reply Code (AP66) | Reply |
| AB | COAST GUARD CLASS |
| AC | DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION |
| AD | DEPARTMENT OF TRANSPORTATION CLASS |
| AE | DEPARTMENT OF TRANSPORTATION EXEMPTION |
| AF | FIREFIGHTING GROUP |
| AG | HAZARD SYMBOL |
| AH | INHABITED BUILDING DISTANCE |
| AJ | LOADING-STOWAGE |
| AK | STORAGE COMPATIBILITY GROUP |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPTA000*;PRMTDPDA000$$DRHA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
DENN*ADOT IDENTIFICATION NUMBER
THE IDENTIFICATION NUMBER ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PROPER SHIPPING NAME. IDENTIFICATION NUMBERS PRECEDED BY THE LETTERS "UN" ARE ASSOCIATED WITH INTERNATIONAL AS WELL AS DOMESTIC TRANSPORTATION AND THOSE PRECEDED BY THE LETTERS "NA" ARE NOT RECOGNIZED FOR INTERNATIONAL TRANSPORTATION OF HAZARDOUS MATERIALS (DANGEROUS GOODS) EXCEPT TO AND FROM THE UNITED STATES AND CANADA.
Enter the alpha-numeric reply with a minimum of one character.
(DENNAF3)
HAZD*ADOT HAZARD CLASS/DIVISION
A DESIGNATION OF THE HAZARD CLASS OR DIVISION CORRESPONDING TO EACH PROPER SHIPPING NAME FOR HAZARDOUS MATERIAL AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
Enter the alpha-numeric reply with a minimum of one character.
(HAZDAM6)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
DTRC*ADOT REGISTRATION CODE
AN ALPHA-NUMERIC CODE ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION IDENTIFYING THE FINAL HAZARD CLASSIFICATION.
Enter the alpha-numeric reply with a minimum of one character.
(DTRCAK6)
SERN*AUN ORGANIZATION SERIAL NUMBER
AN INTERNATIONAL CODE ASSIGNED WITHIN THE UNITED NATION ORGANIZATION TO DESIGNATE THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(SERNAL5)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information