An item of various shapes designed as a component of a STRAINER, SEDIMENT, acting as the cover and retaining the strainer element in place. The item does not have an inlet or outlet connection. It is fastened onto the STRAINER BODY, SEDIMENT by means of bolts, clamps, or threaded. For items with inlet and/or outlet connections, see HEAD, FILTER FLUID.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED52889*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDPCX002*;MATTDPCA000$DALA000*;MATTDPCA000$$DALA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| CUB000 | COPPER ALLOY |
| CU0706 | COPPER ALLOY 706 |
| FEA000 | IRON |
| PCA000 | PLASTIC |
| PCX002 | POLYETHYLENE TEREPHTHALATE GLYCOL (PETG) |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
ABSXDATTACHMENT METHOD
THE MEANS USED TO ATTACH THE ITEM.
Enter the applicable reply code from the table below
(ABSXDAB)
| Table 1 |
| Reply Code (AB47) | Reply |
| AK | BOLTED |
| AB | CLAMP |
| LW | FRICTION |
| AP | THREADED |
| HV | UNION NUT |
IF STYLE/REPLY CODE(s) 1, 2 OR 3 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPK)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 8 OR 9 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU and ADNX)
IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU and ADPF)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU and ADPF)
IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG)
IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADPG)
IF STYLE/REPLY CODE(s) 15 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 16 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU)
IF STYLE/REPLY CODE(s) 18 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU and ADNX)
IF STYLE/REPLY CODE(s) 19 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADPF and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 20 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNU and ADNX)
IF STYLE/REPLY CODE(s) 21 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPF and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 22 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU and ADNX)
IF STYLE/REPLY CODE(s) 23 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ABRY and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 24 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ABKG and ADNU)
IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPG)
IF STYLE/REPLY CODE(s) 26 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU)
IF STYLE/REPLY CODE(s) 27 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPF and ADPG and ADPK)
IF STYLE/REPLY CODE(s) 28 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 29 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNU and ADNX and ADPJ)
IF STYLE/REPLY CODE(s) 30 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADPG and ADPH and ADNX)
IF STYLE/REPLY CODE(s) 31 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKV and ADPM)
IF STYLE/REPLY CODE(s) 32 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKV and ADPG and ADPH)
IF STYLE/REPLY CODE(s) 33 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 34 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPG)
IF STYLE/REPLY CODE(s) 35 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 36 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 37 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 38 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 39 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPF and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 40 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPF and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 41 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU and ADNX)
IF STYLE/REPLY CODE(s) 42 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNU and ADNX)
IF STYLE/REPLY CODE(s) 43 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKV)
IF STYLE/REPLY CODE(s) 44 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 45 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ADNU and HGTH)
IF STYLE/REPLY CODE(s) 46 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ADPG and HGTH)
IF STYLE/REPLY CODE(s) 47 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNU and ADNX)
IF STYLE/REPLY CODE(s) 48 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNX and ADPG)
IF STYLE/REPLY CODE(s) 49 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNX and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 50 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNX and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 51 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and HGTH and ADNU and ADNX)
IF STYLE/REPLY CODE(s) 52 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNX)
IF STYLE/REPLY CODE(s) 53 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPF and ADNU)
IF STYLE/REPLY CODE(s) 54 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 55 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADPF and ADPG and ADNX)
IF STYLE/REPLY CODE(s) 56 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNX)
ABMWLPERIPHERAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE PERIPHERAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ABMWL16)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAC1710 | 1 | SQUARE OR RECTANGULAR |
| AAC1719 | 10 | FLAT OR RECTANGULAR |
| AAC1720 | 11 | FOUR FLAT EARS |
| AAC1721 | 12 | FOUR RAISED EARS |
| AAC1722 | 13 | HEXAGON |
| AAC1723 | 14 | HEXAGON |
| AAC1724 | 15 | CIRCULAR W/FLAT EARS |
| AAC1725 | 16 | CIRCULAR W/RAISED EARS |
| AAC1726 | 17 | SPECIAL |
| AAC1727 | 18 | SPECIAL |
| AAC1728 | 19 | SPECIAL |
| AAC1711 | 2 | SQUARE OR RECTANGULAR |
| AAC1729 | 20 | SPECIAL |
| AAC1730 | 21 | SPECIAL |
| AAC1731 | 22 | SPECIAL |
| AAC1732 | 23 | SPECIAL |
| AAC1733 | 24 | SPECIAL |
| AAC1734 | 25 | RECTANGULAR W/RAISED EARS |
| AAC1735 | 26 | SPECIAL |
| AAC1736 | 27 | OVAL W/FLAT EARS |
| AAC1737 | 28 | OVAL W/RAISED EARS |
| AAC1738 | 29 | NON-CIRCULAR |
| AAC1712 | 3 | SQUARE OR RECTANGULAR |
| AAC1739 | 30 | NON-CIRCULAR W/RAISED EYES |
| AAC1740 | 31 | CIRCULAR |
| AAC1741 | 32 | CIRCULAR W/RAISED EYES |
| AAC1742 | 33 | OVAL |
| AAC1743 | 34 | SPECIAL W/TWO PERIPHERAL FLATS |
| AAC1744 | 35 | DIAMOND |
| AAC1745 | 36 | DIAMOND W/RAISED EYES |
| AAC1746 | 37 | ELLIPTICAL |
| AAC1747 | 38 | ELLIPTICAL W/RAISED EYES |
| AAC1748 | 39 | SPECIAL W/FLAT EARS |
| AAC1713 | 4 | SQUARE OR RECTANGULAR |
| AAC1749 | 40 | SPECIAL W/RAISED EARS |
| AAC1750 | 41 | SPECIAL |
| AAC1751 | 42 | ELLIPTICAL W/TWO PERIPHERAL FLATS |
| AAC1752 | 43 | CIRCULAR |
| AAC1753 | 44 | RECTANGULAR OR SQUARE W/EARS |
| AAC1754 | 45 | TRIANGLE |
| AAC1755 | 46 | TRIANGLE W/RAISED EYES |
| AAC1756 | 47 | SPECIAL |
| AAC1757 | 48 | SPECIAL W/RAISED EYES |
| AAC1758 | 49 | CIRCULAR W/FLAT EARS |
| AAC1714 | 5 | FOUR RAISED EARS |
| AAC1759 | 50 | CIRCULAR W/RAISED EARS |
| AAC1760 | 51 | TRIANGULAR |
| AAC1761 | 52 | CIRCULAR W/ONE EAR |
| AAC1762 | 53 | SPECIAL |
| AAC1763 | 54 | OVAL |
| AAC1764 | 55 | CIRCULAR W/FLAT EARS |
| DQ01157 | 56 | CIRCULAR W/LUGS |
| AAC1715 | 6 | FOUR FLAT EARS |
| AAC1716 | 7 | FOUR RAISED EARS |
| AAC1717 | 8 | NON-CIRCULAR |
| AAC1718 | 9 | FOUR RAISED EARS |
IF STYLE/REPLY CODE(s) 1, 2, 10, 12, 20 OR 21 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AARX and ABKU and ADPN and ADPQ and ADPR)
IF STYLE/REPLY CODE(s) 4, 5, 6, 7, 13, 19 OR 22 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU and ADPN and ADPR)
IF STYLE/REPLY CODE(s) 3, 11, 15, 16, 18 OR 25 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AARX and ABKU and ADPN)
IF STYLE/REPLY CODE(s) 10, 12, 13, 18 OR 23 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPS and ADPW and ADPX)
IF STYLE/REPLY CODE(s) 3 OR 25 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR)
IF STYLE/REPLY CODE(s) 4, 5, 11, 13, 18, 19, 22 OR 24 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ)
IF STYLE/REPLY CODE(s) 21, 22 OR 24 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPP and ADPW and ADPX)
IF STYLE/REPLY CODE(s) 7, 15 OR 16 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPS)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN and ADPR and ADPS)
IF STYLE/REPLY CODE(s) 9 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU and ADPN and ADPR)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPV)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPT and ADPU)
IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU and ADPN)
IF STYLE/REPLY CODE(s) 21 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPT)
IF STYLE/REPLY CODE(s) 18 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AAVL and ADPY)
IF STYLE/REPLY CODE(s) 23 OR 24 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU)
IF STYLE/REPLY CODE(s) 26 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR)
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRL6)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAC1765 | 1 | SPHERICAL RECESS |
| AAC1774 | 10 | CIRCULAR RECESS |
| AAC1775 | 11 | CIRCULAR RECESS |
| AAC1776 | 12 | CIRCULAR RECESS |
| AAC1777 | 13 | OBLONG RECESS |
| AAC1778 | 14 | SQUARE OR RECTANGULAR RECESS |
| AAC1779 | 15 | CIRCULAR RECESS |
| AAC1780 | 16 | CIRCULAR RECESS |
| AAC1781 | 17 | LOUVERED OPENING |
| AAC1782 | 18 | CIRCULAR RECESS |
| AAC1783 | 19 | SQUARE OR RECTANGULAR RECESS |
| AAC1766 | 2 | CIRCULAR RECESS |
| AAC1784 | 20 | CIRCULAR RECESS |
| AAC1785 | 21 | CIRCULAR RECESS |
| AAC1786 | 22 | SQUARE OR RECTANGULAR RECESS |
| AAC1787 | 23 | OBLONG RECESS |
| AAC1788 | 24 | OBLONG RECESS |
| AAC1789 | 25 | CIRCULAR RECESS |
| AAC1790 | 26 | FLAT |
| AAC1767 | 3 | CIRCULAR RECESS |
| AAC1768 | 4 | OBLONG RECESS |
| AAC1769 | 5 | OBLONG RECESS |
| AAC1770 | 6 | SQUARE OR RECTANGULAR RECESS |
| AAC1771 | 7 | SQUARE OR RECTANGULAR RECESS |
| AAC1772 | 8 | SQUARE OR RECTANGULAR RECESS |
| AAC1773 | 9 | RECESS, SAME SHAPE AS THE PERIPHERY |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAB2.0*;ABGLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKG*JBOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKGJAC2.0*;ABKGJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAB2.0*;ABKVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAC2.0*;ABRYJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNU*JCORNER RADIUS
A MEASUREMENT OF A STRAIGHT LINE FROM THE MIDPOINT OF A ROUNDED CORNER TO ITS PERIPHERY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNUJAB2.0*;ADNUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNX*JBODY RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNXJAC2.0*;ADNXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNY*JDISTANCE BETWEEN HOLES ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNYJAB2.0*;ADNYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNZ*JDISTANCE BETWEEN HOLES ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNZJAC2.0*;ADNZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPA*JDISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPAJAB2.0*;ADPAJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPB*JDISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPBJAA2.0*;ADPBJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPC*JDISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPCJAB2.0*;ADPCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPD*JDISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPDJAC2.0*;ADPDJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPE*JCORNER BEVEL LENGTH
THE LENGTH OF A LINEAR BREAK AT AN ANGLE TO THE SURFACES FORMING THE EDGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPEJAA2.0*;ADPEJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPF*JINVERTED RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPFJAB2.0*;ADPFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPG*JEAR RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPGJAA2.0*;ADPGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPK*JCORNER HOLE CENTERLINE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPKJAB2.0*;ADPKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ASDB*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASDBJAB2.0*;ASDBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HGTH*JHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(HGTHJAC2.0*;HGTHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNV*AHOLE QUANTITY ALONG LENGTH
NONE.
Enter the numeric reply with a minimum of one digit.
(ADNVA10*)
ADNW*AHOLE QUANTITY ALONG WIDTH
NONE.
Enter the numeric reply with a minimum of one digit.
(ADNWA10*)
ADPH*AEAR QUANTITY
NONE.
Enter the numeric reply with a minimum of one digit.
(ADPHA10*)
ADPJ*ACORNER QUANTITY
NONE.
Enter the numeric reply with a minimum of one digit.
(ADPJA10*)
ADPM*ABOLT CIRCLE HOLE QUANTITY
THE NUMBER OF HOLES IN A BOLT CIRCLE.
Enter the numeric reply with a minimum of one digit.
(ADPMA10*)
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAA2.0*;AARXJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAVL*JPILOT DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THAT PORTION USED TO GUIDE THE ITEM AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAVLJAB2.0*;AAVLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKU*JFLANGE THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A FLANGE,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKUJAB2.0*;ABKUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPN*JFIRST RECESS INSIDE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPNJAB2.0*;ADPNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPP*JSECOND RECESS INSIDE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPPJAC2.0*;ADPPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPQ*JINSIDE CORNER RADIUS
A MEASUREMENT OF THE LINE SEGMENT EXTENDING FROM THE CENTER OF A CIRCLE OR SPHERE TO THE CURVE OF AN INSIDE CORNER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPQJAB2.0*;ADPQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPR*JBODY THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A BODY,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPRJAA2.0*;ADPRJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPT*JFIRST RECESS DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPTJAA2.0*;ADPTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPU*JSECOND RECESS DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPUJAA2.0*;ADPUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPV*JBODY SPHERICAL RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPVJAC2.0*;ADPVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPW*JOUTSIDE CORNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPWJAC2.0*;ADPWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPX*JBODY OUTSIDE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPXJAB2.0*;ADPXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPY*JPILOT HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPYJAA2.0*;ADPYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPS*BINSIDE ANGLE IN DEG
NONE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ADPSB2.0)
IF STYLE/REPLY CODE(s) EW WERE ENTERED FOR MRC CDXK, YOU MUST ANSWER MRC (ABUJ)
IF YOU ANSWER MRC CDXK, YOU MUST ANSWER MRC (ADQK)
CDXK*JMOUNTING HOLE TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF MOUNTING HOLES PROVIDED IN OR ON THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CDXKJRD2.0*;CDXKJRD2.0$$JRD2.1*)
| Table 1 |
| Reply Code (AA78) | Reply |
| RC | COUNTERBORED |
| HG | COUNTERSUNK |
| RD | DIMPLED |
| ET | PLAIN |
| EW | THREADED |
ABUJ*ATHREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the alpha-numeric reply with a minimum of one character.
(ABUJAE2)
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (AAUB)
IF STYLE/REPLY CODE(s) 2 OR 3 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (ABGC and ABGD)
IF STYLE/REPLY CODE(s) 4 OR 5 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (ABGC)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (AAUB and ABGC and ABGD)
ADQK*LMOUNTING OPENING SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE SHAPE OF THE MOUNTING OPENING.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADQKL2)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAC1791 | 1 | UNTHREADED HOLE |
| AAC1792 | 2 | CLOSED HORIZONTAL SLOT |
| AAC1793 | 3 | CLOSED VERTICAL SLOT |
| AAC1794 | 4 | OPEN VERTICAL SLOT |
| AAC1795 | 5 | OPEN VERTICAL CURVED SLOT |
| AAC1796 | 6 | SLOTTED HOLE |
AAUB*JHOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAUBJAC2.0*;AAUBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGC*JSLOT WIDTH
THE DISTANCE,MEASURED ALONG A STRAIGHT LINE PERPENDICULAR TO THE LONGITUDINAL AXIS OF THE SLOT,FROM ONE EDGE TO THE OTHER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGCJAC2.0*;ABGCJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGD*JSLOT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SLOT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGDJAC2.0*;ABGDJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CDXLDFLUID FILTER ELEMENT RETAINER
AN INDICATION OF WHETHER OR NOT A FLUID FILTER ELEMENT RETAINER IS INCLUDED.
Enter the applicable reply code from the table below
(CDXLDB)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
Enter the word CAGE immediately followed by a colon, followed by a space then the 5 position Commercial and Government Entity (CAGE) Code, followed by a space and the letters PN immediately followed by a colon, a space and the part/model/reference number.
AVMF*AADDITIVE MANUFACTURING CAGE AND PART/MODEL NUMBER
THE ADDITIVE MANUFACTURER'S FIVE-DIGIT CAGE DESIGNATION AND THE PART/MODEL NUMBER.
CAGE: XXXXX PN: XXXXXXXXX
CAGE: XXXXX PN: XXXXXXXXX AND CAGE: XXXXX PN: XXXXXXXXX
(AVMFACAGE: 30003 PN: 4866113-485-AM*;AVMFACAGE: 30003 PN: 4866113-485-AM$$CAGE: 30003 PN: 5977224-120-AM)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAA5)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAL7)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information