An access cover which is an integral part of the airframe structure of an aircraft. Excludes:COVER, ACCESS.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED51575*)
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ABGL)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ABGL and ADPC and ADPD)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNV and ADPD and ABGL and ADNY and ADPC)
IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPD and ADPB and ABGL and ADPC and ADPA)
IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPD and ADNZ and ABGL)
IF STYLE/REPLY CODE(s) 16 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPD and ADNZ and ABGL and ADNW)
IF STYLE/REPLY CODE(s) 19 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADNW and ADNV and ADPD and ADNZ and ABGL)
IF STYLE/REPLY CODE(s) 22 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADNW and ADNV and ADPD and ADNZ and ABGL)
IF STYLE/REPLY CODE(s) 28 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNW and ADNV and ADPA and ADPB and ADPC and ADNZ and ADPD and ABGL)
IF STYLE/REPLY CODE(s) 31 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNW and ADNV and ADNY and ADPA and ADPC and ADPD and ABGL and ADPB)
IF STYLE/REPLY CODE(s) 34 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNW and ADNV and ADNY and ADPA and ADPC and ADPB and ADNZ and ADPD and ABGL)
IF STYLE/REPLY CODE(s) 37 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPA and ADPC and ADPD and ADPB and ABGL and ADPK)
IF STYLE/REPLY CODE(s) 40 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPC and ADPA and ADPB and ADNW and ADPK and ADNV and ADNZ and ADPD and ABGL)
IF STYLE/REPLY CODE(s) 43 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPA and ADPB and ADPD and ABGL and ADNW and ADPK and ADNV)
IF STYLE/REPLY CODE(s) 46 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPA and ADPC and ADNW and ADPK and ADNV and ADPB and ADPD and ADNZ and ABGL)
IF STYLE/REPLY CODE(s) 50 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPD and ADPG and ADPF and ADNZ and ABGL)
IF STYLE/REPLY CODE(s) 52 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADNX and ADNZ and ADPD and ABGL)
IF STYLE/REPLY CODE(s) 54 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADPF and ADPG and ADNZ and ABGL and ABRY and ADNY and ADPC and ADPD)
IF STYLE/REPLY CODE(s) 59 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADPJ and ABKG and ADPM and ASDB)
IF STYLE/REPLY CODE(s) 69 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADPG and ABRY and ADNX and ABKG)
IF STYLE/REPLY CODE(s) 71 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADPG and ADNY and ABRY and ABGL and ADNZ)
IF STYLE/REPLY CODE(s) 73 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADPG and ADPK and ADPF and ABRY and ADNY and ADPA and ABGL)
IF STYLE/REPLY CODE(s) 77 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKV)
IF STYLE/REPLY CODE(s) 78 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADVJ and ABKV)
IF STYLE/REPLY CODE(s) 79 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNV and BPCJ and ABKV and ADVJ)
IF STYLE/REPLY CODE(s) 80 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADPM and ABKG and ABKV)
IF STYLE/REPLY CODE(s) 82 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 83 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC)
IF STYLE/REPLY CODE(s) 84 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNV and ADNY and ABRY and ABGL and ADPC)
IF STYLE/REPLY CODE(s) 85 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ADNY and ABRY)
ABMWLPERIPHERAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE PERIPHERAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ABMWL110)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AV10001 | 1 | RECTANGLE, NO HOLES |
| AV10010 | 10 | RECTANGLE, TWO HOLES |
| AV10104 | 104 | ROUND, ONE EAR, ONE OR MULTI HOLES |
| AV10106 | 106 | OVAL, FOUR HOLES |
| AV10108 | 108 | OVAL, MULTI HOLES |
| AV10109 | 109 | ROUND, FOUR EARS AND HOLES |
| AV10110 | 110 | PENTAGON, NO HOLES |
| AV10112 | 112 | PENTAGON, MULTI HOLES |
| AV10115 | 115 | IRREGULAR PENTAGON, NO HOLES |
| AV10117 | 117 | IRREGULAR PENTAGON, THREE HOLES |
| AV10119 | 119 | IRREGULAR PENTAGON, FIVE HOLES |
| AV10122 | 122 | OVAL, MULTI HOLES |
| AV10123 | 123 | RECTANGLE, ROUNDED CORNERS, MULTI HOLES |
| AV10124 | 124 | ROUND, MULTI HOLES |
| AV10126 | 125 | DIAMOND, ROUNDED CORNERS, NO HOLES |
| AV10127 | 126 | BAND TYPE |
| AV10128 | 127 | TRIANGLE, STRAIGHT AND RADII SIDES, THREE HOLES |
| AV10129 | 128 | IRREGULAR OCTAGON |
| DQ01120 | 129 | TRAPEZOID, MULTI HOLE |
| AV10013 | 13 | RECTANGLE, FOUR HOLES |
| DQ01121 | 130 | TRAPEZOID, ROUND CORNERS, MULTI HOLE |
| AV10016 | 16 | RECTANGLE, MULTI HOLES |
| AV10019 | 19 | RECTANGLE, MULTI HOLES |
| AV10022 | 22 | RECTANGLE, MULTI HOLES |
| AV10028 | 28 | RECTANGLE, MULTI HOLES |
| AV10031 | 31 | RECTANGLE, MULTI HOLES |
| AV10034 | 34 | RECTANGLE, MULTI HOLES |
| AV10037 | 37 | RECTANGLE, EIGHT HOLES |
| AV10004 | 4 | RECTANGLE, ONE CENTER HOLE |
| AV10040 | 40 | RECTANGLE, MULTI HOLES |
| AV10043 | 43 | RECTANGLE, MULTI HOLES |
| AV10046 | 46 | RECTANGLE, MULTI HOLES |
| AV10050 | 50 | RECTANGLE, EARED CORNERS, FOUR HOLES |
| AV10052 | 52 | FOUR RADII SIDES, FOUR HOLES |
| AV10054 | 54 | RECTANGLE, ROUNDED CORNERS, FOUR EARS AN D HOLES |
| AV10059 | 59 | REGULAR POLYGON, MULTI HOLES |
| AV10069 | 69 | ROUND, FOUR EARS AND HOLES, ONE LOBE |
| AV10007 | 7 | RECTANGLE, MULTI HOLES |
| AV10071 | 71 | RECTANGLE, FOUR EARS AND HOLES |
| AV10073 | 73 | OVAL, SIX EARS AND HOLES |
| AV10077 | 77 | ROUND, NO HOLES |
| AV10078 | 78 | ROUND, ONE HOLE |
| AV10079 | 79 | ROUND, MULTI HOLES |
| AV10080 | 80 | ROUND, MULTI HOLES |
| AV10082 | 82 | OVAL, NO HOLES |
| AV10083 | 83 | OVAL, ONE HOLE |
| AV10084 | 84 | OVAL, MULTI HOLES |
| AV10085 | 85 | IRREGULAR, FLAT SIDES, RADII ENDS, TWO HOLES |
| AV10086 | 86 | DIAMOND, ROUNDED CORNERS, TWO HOLES |
| AV10090 | 90 | ROUND, TWO EARS AND HOLES |
| AV10094 | 94 | RECTANGLE, TWO EARS AND HOLES |
| AV10095 | 95 | TRIANGLE, SHARP CORNERS,NO HOLES |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAB2.0*;ABGLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKG*JBOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKGJAA2.0*;ABKGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAA2.0*;ABKVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAA2.0*;ABRYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNX*JBODY RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNXJAC2.0*;ADNXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPA*JDISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPAJAA2.0*;ADPAJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPB*JDISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPBJAA2.0*;ADPBJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPC*JDISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPCJAC2.0*;ADPCJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPD*JDISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPDJAB2.0*;ADPDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPF*JINVERTED RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPFJAB2.0*;ADPFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPG*JEAR RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPGJAA2.0*;ADPGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPK*JCORNER HOLE CENTERLINE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPKJAC2.0*;ADPKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUP*JOUTSIDE CORNER BEVEL LENGTH ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUPJAA2.0*;ADUPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADVJ*JBOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADVJJAA2.0*;ADVJJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPCJ*JDISTANCE BETWEEN HOLE CENTERS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BPCJJAC2.0*;BPCJJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPYD*JMINOR LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BPYDJAB2.0*;BPYDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNY*JDISTANCE BETWEEN HOLES ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNYJAB2.0*;ADNYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNZ*JDISTANCE BETWEEN HOLES ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNZJAB2.0*;ADNZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNV*AHOLE QUANTITY ALONG LENGTH
NONE.
Enter the numeric reply with a minimum of one digit.
(ADNVA10*)
ADNW*AHOLE QUANTITY ALONG WIDTH
NONE.
Enter the numeric reply with a minimum of one digit.
(ADNWA10*)
ADPH*AEAR QUANTITY
NONE.
Enter the numeric reply with a minimum of one digit.
(ADPHA10*)
ADPJ*ACORNER QUANTITY
NONE.
Enter the numeric reply with a minimum of one digit.
(ADPJA10*)
ADPM*ABOLT CIRCLE HOLE QUANTITY
THE NUMBER OF HOLES IN A BOLT CIRCLE.
Enter the numeric reply with a minimum of one digit.
(ADPMA10*)
CKWB*DCORNER CUT TYPE
INDICATES THE TYPE OF CUT ON THE CORNER/S/.
Enter the applicable reply code from the table below
(CKWBDEQ*;CKWBDER$DAA*)
| Table 1 |
| Reply Code (AL18) | Reply |
| AA | BEVEL |
| EQ | ROUND |
| ER | SQUARE |
ADNU*JCORNER RADIUS
A MEASUREMENT OF A STRAIGHT LINE FROM THE MIDPOINT OF A ROUNDED CORNER TO ITS PERIPHERY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNUJAA2.0*;ADNUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPE*JCORNER BEVEL LENGTH
THE LENGTH OF A LINEAR BREAK AT AN ANGLE TO THE SURFACES FORMING THE EDGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPEJAA2.0*;ADPEJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) 1, 2 OR 3 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and ADPQ and AARX and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 4, 5 OR 6 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN and ADPQ and ADPR and ADJT and ADJU and ABKU)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU and ADPN and ADPR and CWCJ and ADJT and ADJU)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (CWCJ and ADPN and ADPR)
IF STYLE/REPLY CODE(s) 9 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU and ADPN and ADPR)
IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPX and ADPW and CWCJ and ADPR and ADPQ and AARX and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ and AARX and ABKU and ADPN)
IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and ADJT and ADPN and ADJU)
IF STYLE/REPLY CODE(s) 15 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN and CWCJ and ADPR and AARX)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU)
IF STYLE/REPLY CODE(s) 19 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ and ADPR and ADJT and ADJU and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 20 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ and ADPR and AARX and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 21 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPX and ADPW and ADPP and ADPN and ADPQ and ADPR and AARX and ADPT and ABKU)
IF STYLE/REPLY CODE(s) 22 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPX and ADPW and ADPQ and ADPR and ADJT and ABKU and ADPN and ADPP and ADJU)
IF STYLE/REPLY CODE(s) 24 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPW and ADPP and ADPN and ADPQ)
IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and AARX and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 26 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR)
IF STYLE/REPLY CODE(s) 27 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR)
IF STYLE/REPLY CODE(s) 28 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and ABKU)
IF STYLE/REPLY CODE(s) 29 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and ABKU)
IF STYLE/REPLY CODE(s) 30 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ and ADPR)
IF STYLE/REPLY CODE(s) 31 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJU and ADJT and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 32 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AARX and ADPR)
IF STYLE/REPLY CODE(s) 36 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN and ABKU and ADPR and ADPP)
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRL4)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AV10130 | 1 | SPHERICAL RECESS |
| AV10139 | 10 | CIRCULAR RECESS |
| AV10140 | 11 | CIRCULAR RECESS |
| AV10143 | 14 | SQUARE OR RECTANGULAR RECESS |
| AV10144 | 15 | CIRCULAR RECESS |
| AV10146 | 17 | LOUVERED OPENING |
| AV10165 | 19 | SQUARE OR RECTANGULAR RECESS |
| AV10131 | 2 | CIRCULAR RECESS |
| AV10166 | 20 | CIRCULAR RECESS |
| AV10167 | 21 | CIRCULAR RECESS |
| AV10168 | 22 | SQUARE OR RECTANGULAR RECESS |
| AV10170 | 24 | OBLONG RECESS |
| AV10171 | 25 | CIRCULAR RECESS |
| AV10147 | 26 | FLAT |
| AV10148 | 27 | FLAT W/OPEN CENTER |
| AV10149 | 28 | FLAT, ROUND RIB REINFORCED |
| AV10150 | 29 | FLAT, SQUARE OR RECTANGULAR RIB REINFORCED |
| AV10132 | 3 | CIRCULAR RECESS |
| AV10151 | 30 | ARCHED |
| AV10152 | 31 | RECES, OTHER THAN ROUND |
| AV10153 | 32 | CYLINDER W/O LINER |
| DQ00913 | 36 | EXTENDED SIDE |
| AV10133 | 4 | OBLONG RECESS |
| AV10134 | 5 | OBLONG RECESS |
| AV10135 | 6 | SQUARE OR RECTANGULAR RECESS |
| AV10136 | 7 | SQUARE OR RECTANGULAR RECESS |
| AV10137 | 8 | SQUARE OR RECTANGULAR RECESS |
| AV10138 | 9 | SQUARE OR RECTANGULAR RECESS |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAA2.0*;AARXJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKU*JFLANGE THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A FLANGE,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKUJAB2.0*;ABKUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAC2.0*;ADJUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPN*JFIRST RECESS INSIDE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPNJAA2.0*;ADPNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPP*JSECOND RECESS INSIDE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPPJAA2.0*;ADPPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPQ*JINSIDE CORNER RADIUS
A MEASUREMENT OF THE LINE SEGMENT EXTENDING FROM THE CENTER OF A CIRCLE OR SPHERE TO THE CURVE OF AN INSIDE CORNER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPQJAC2.0*;ADPQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPR*JBODY THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A BODY,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPRJAB2.0*;ADPRJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPT*JFIRST RECESS DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPTJAB2.0*;ADPTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPW*JOUTSIDE CORNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPWJAA2.0*;ADPWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPX*JBODY OUTSIDE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPXJAB2.0*;ADPXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWCJ*JINSIDE ANGLE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCJJDA2.0*;CWCJJDA2.0$$JDA2.1*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDPCP000*;MATTDRCE000$DMGB000*;MATTDRCE000$$DMGB000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2219 | ALUMINUM ALLOY 2219 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL7178 | ALUMINUM ALLOY 7178 |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| GFA000 | GRAPHITE |
| MGA000 | MAGNESIUM |
| MGB000 | MAGNESIUM ALLOY |
| MG0001 | MAGNESIUM ALLOY AZ31B |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCFR00 | PLASTIC CARBON FIBER REINFORCED |
| PCH000 | PLASTIC EPOXY |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE |
| PCR000 | PLASTIC POLYCARBONATE |
| RCE000 | RUBBER |
| RCC000 | RUBBER SILICONE |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| STB000 | STEEL CORROSION RESISTING |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDXXA000*;SFTTDXXF000$DPSA000*;SFTTDXXF000$$DPSA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ALA000 | ALUMINUM ALLOY |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| DCA000 | DICHROMATE |
| ENB000 | ENAMEL LUSTERLESS |
| LQA000 | LACQUER |
| LQD000 | LACQUER ACRYLIC |
| NLA000 | NICKEL |
| XXF000 | OXIDE ALUMINUM |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PNE000 | PAINT POLYURETHANE |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PRA000 | PRIMER |
| PRD000 | PRIMER EPOXY-POLYAMIDE |
| PRC000 | PRIMER ZINC CHROMATE |
| SNA000 | TIN |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
ADQBDSECURING DEVICE TYPE
INDICATES THE TYPE OF DEVICE USED TO FASTEN THE ITEM.
Enter the applicable reply code from the table below
(ADQBDAK*;ADQBDAG$DAB*;ADQBDAG$$DAB*)
| Table 1 |
| Reply Code (AC52) | Reply |
| AB | FLUSH CATCH |
| AC | FRICTION CATCH |
| AD | HINGE |
| AF | SLIDE FASTENER |
| JF | SPECIAL |
| AG | SPRING CLIP |
| AH | STRAP CLAMP |
| AJ | THREADED FASTENER |
| AK | TURNLOCK FASTENER |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (AAUB)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (ABGD and ABGC)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (ABGC)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (ABGD and ABGC)
ADQK*LMOUNTING OPENING SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE SHAPE OF THE MOUNTING OPENING.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADQKL5)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AV10157 | 1 | UNTHREADED HOLE |
| AV10158 | 2 | THREADED HOLE |
| AV10159 | 3 | CLOSED HORIZONTAL SLOT |
| AV10160 | 4 | OPEN HORIZONTAL SLOT |
| AV10161 | 5 | CLOSED VERTICAL SLOT |
AAUB*JHOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAUBJAA2.0*;AAUBJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGC*JSLOT WIDTH
THE DISTANCE,MEASURED ALONG A STRAIGHT LINE PERPENDICULAR TO THE LONGITUDINAL AXIS OF THE SLOT,FROM ONE EDGE TO THE OTHER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGCJAC2.0*;ABGCJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGD*JSLOT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SLOT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGDJAB2.0*;ABGDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBRN*;CBBLDBRP$$DAPZ*)
| Table 1 |
| Reply Code (AN47) | Reply |
| BRN | HANDLE FOR OPENING, LIFTING, CLOSING, OR THE LIKE |
| APZ | OBSERVATION FACILITY |
| BRQ | SEALING CAPABILITY |
| BRP | SPECIAL MARKING |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ052*;HZRDDHAZ012$$DHAZ092*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ012 | COPPER |
| HAZ092 | MAGNESIUM |
| HAZ052 | ZINC |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ASDB*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASDBJAC2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information