Table 1
	Reply Code (AA65)	Reply
	AB	ACID RESISTANT
	AW	CHEMICAL RESISTANT
	QX	EXTREME TEMPERATURE RESISTANT
	AD	FIRE RETARDANT
	CY	HEAT RESISTANT
	TH	HIGH TEMPERATURE RESISTANT
	KK	LIGHT RESISTANT
	AJ	MILDEW RESISTANT
	BH	MOTH RESISTANT
	LY	STAIN RESISTANT
	DZ	WATER REPELLENT
	BT	WEATHER RESISTANT

HUESDCOLOR

A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.

Enter the applicable reply code from the table below

(HUESDMS0010*;HUESDRG0050$DBU0115*;HUESDRG0050$$DBU0115*)

Table 1
	Reply Code (AD06)	Reply
	AM0000	AMBER
	MS0242	AMERICAN BEAUTY
	MS0243	AMERICAN BEAUTY, COLOR ASSN OF THE US, 70052
	A	ANY ACCEPTABLE
	MS0008	AQUA
	AV0000	AVOCADO
	MS0010	BEAVER
	MS0244	BEAVER, COLOR ASSN OF THE US, 70106
	BE0000	BEIGE
	MS0011	BISQUE
	BL0000	BLACK
	BL0182	BLACK, COLOR ASSN OF THE US, 37030
	BL0043	BLACK, COLOR ASSN OF THE US, 65018
	BL0048	BLACK, COLOR ASSN OF THE US, 66043
	BU0000	BLUE
	BU0054	BLUE STEEL
	BU0009	BLUE, ALICE
	BU0106	BLUE, BABY
	BU0016	BLUE, CHINA
	BU0017	BLUE, COBALT
	BU0133	BLUE, COLOR ASSN OF THE US, 66027
	BU0134	BLUE, COLOR ASSN OF THE US, 66028
	BU0376	BLUE, COLOR ASSN OF THE US, 66045
	BU0377	BLUE, COLOR ASSN OF THE US, 66060
	BU0342	BLUE, COLOR ASSN OF THE US, 70012
	BU0285	BLUE, COLOR ASSN OF THE US, 70087
	BU0135	BLUE, COLOR ASSN OF THE US, 70112
	BU0322	BLUE, COLOR ASSN OF THE US, 70209
	BU0324	BLUE, COLOR ASSN OF THE US, 70211
	BU0005	BLUE, DARK
	BU0109	BLUE, DARK, NAVY
	BU0020	BLUE, DELFT
	BU0157	BLUE, FRENCH
	BU0406	BLUE, GRAY, COLOR ASSN OF THE US, 66057
	BU0026	BLUE, LIGHT
	BU0108	BLUE, LIGHT, DELFT
	BU0110	BLUE, LIGHT, NAVY
	BU0028	BLUE, MANDARIN
	BU0029	BLUE, MEDIUM
	BU0032	BLUE, NATIONAL FLAG
	BU0115	BLUE, NATIONAL FLAG, COLOR ASSN OF THE US, 70077
	BU0033	BLUE, NAVY
	BU0034	BLUE, OLD GLORY
	BU0116	BLUE, OLD GLORY, COLOR ASSN OF THE US, 70075
	BU0035	BLUE, OPAL
	BU0037	BLUE, ORIENTAL
	BU0042	BLUE, ROYAL
	BU0043	BLUE, SAPPHIRE
	BU0111	BLUE, SKIPPER
	BU0048	BLUE, SLATE
	BU0049	BLUE, TEAL
	BU0136	BLUE, TEAL, COLOR ASSN OF THE US, 65024
	BU0052	BLUE, YALE
	BR0000	BROWN
	BR0005	BROWN, AFRICAN
	BR0056	BROWN, AFRICAN, COLOR ASSN OF THE US, 70096
	BR0007	BROWN, AUTUMN
	BR0055	BROWN, COLOR ASSN OF THE US, 66069
	BR0118	BROWN, COLOR ASSN OF THE US, 70141
	BR0010	BROWN, DARK
	BR0013	BROWN, GOLDEN
	BR0003	BROWN, LIGHT
	BR0004	BROWN, MEDIUM
	BR0019	BROWN, RUST
	BR0021	BROWN, SEAL
	BR0057	BROWN, SEAL, COLOR ASSN OF THE US, 66054
	BR0022	BROWN, WALNUT
	MS0013	BUFF
	MS0089	BUFF, HEATHER
	RE0047	CARMINE
	MS0015	CHARCOAL
	GR0044	CHARTREUSE
	PK0008	CORAL
	MS0090	CORAL, BERMUDA
	CR0000	CREAM
	MS0021	ECRU
	MS0331	ECRU, FED STD 595, 13690
	GR0003	EMERALD
	RE0040	FLAME
	MS0092	FOXGLOVE
	MS0024	GARNET
	GL0000	GOLD
	GL0028	GOLD, SHADE 105801
	YE0016	GOLDENROD
	GY0004	GRAY, AIRCRAFT
	GY0007	GRAY, CHARCOAL
	GY0008	GRAY, DARK
	GY0097	GRAY, DARK, FED STD 595, 36231
	GY0028	GRAY, FED STD 595, 16473
	GY0002	GRAY, LIGHT
	GY0098	GRAY, LIGHT, FED STD 595, 36440
	GY0037	GRAY, MALTESE
	GY0014	GRAY, MEDIUM
	GY0224	GRAY, MEDIUM, COLOR ASSN OF THE US, 66062
	GY0099	GRAY, MEDIUM, FED STD 595, 36231
	GY0072	GRAY, NAVY
	GY0017	GRAY, PEARL
	GY0019	GRAY, SILVER
	GY0021	GRAY, STEEL
	GY0000	GRAY/GREY
	GR0000	GREEN
	GR0321	GREEN, CAMOUFLAGE
	GR0487	GREEN, CAMOUFLAGE, US ARMY, 483
	GR0086	GREEN, CHRISTMAS
	GR0310	GREEN, COLOR ASSN OF THE US, 11633
	GR0134	GREEN, COLOR ASSN OF THE US, 66034
	GR0457	GREEN, COLOR ASSN OF THE US, 66078
	GR0294	GREEN, COLOR ASSN OF THE US, 70064
	GR0311	GREEN, COLOR ASSN OF THE US, 70166
	GR0020	GREEN, DARK
	GR0021	GREEN, EMERALD
	GR0009	GREEN, FED STD 595, 14036
	GR0458	GREEN, FED STD 595, 14158
	GR0024	GREEN, FOREST
	GR0025	GREEN, GOLF
	GR0083	GREEN, GRASS
	GR0026	GREEN, GRAY
	GR0133	GREEN, GRAY, COLOR ASSN OF THE US, 66055
	GR0027	GREEN, HUNTER
	GR0028	GREEN, IRISH
	GR0098	GREEN, IRISH, COLOR ASSN OF THE US, 70168
	GR0030	GREEN, KELLY
	GR0031	GREEN, LEAF
	GR0032	GREEN, LIGHT
	GR0006	GREEN, MEDIUM
	GR0087	GREEN, MEDIUM LEAF
	GR0033	GREEN, MOSSTONE
	GR0135	GREEN, MOSSTONE, COLOR ASSN OF THE US, 65022
	GR0136	GREEN, MYRTLE
	GR0034	GREEN, NILE
	GR0011	GREEN, OLIVE
	GR0063	GREEN, OLIVE, 107
	GR0007	GREEN, SAGE
	GR0138	GREEN, SAGE, COLOR ASSN OF THE US, 66046
	GR0038	GREEN, SEA
	GR0039	GREEN, SPRING
	GR0305	GREEN, US AIR FORCE, 1565
	KH0000	KHAKI
	KH0003	KHAKI, COLOR ASSN OF THE US, 66019
	MS0031	LAVENDER
	YE0017	LEMON, LIGHT
	MS0033	LILAC
	GR0047	LIME
	MS0034	MAGENTA
	MS0035	MAHOGANY
	MS0231	MAIZE
	MA0000	MAROON
	MA0005	MAROON, COLOR ASSN OF THE US, 66052
	NA0000	NATURAL
	MS0038	NICKEL
	MS0039	NUTMEG
	LD0008	OLIVE
	LD0000	OLIVE DRAB
	LD0024	OLIVE DRAB, COLOR ASSN OF THE US, 66020
	LD0025	OLIVE DRAB, COLOR ASSN OF THE US, 66021
	LD0029	OLIVE DRAB, COLOR ASSN OF THE US, 66022
	LD0030	OLIVE DRAB, COLOR ASSN OF THE US, 66023
	LD0051	OLIVE DRAB, FED STD 595, 24084
	LD0022	OLIVE DRAB, LIGHT
	LD0023	OLIVE DRAB, LIGHT, COLOR ASSN OF THE US, 70184
	LD0027	OLIVE DRAB, US ARMY, 22-OBSOLETE
	LD0028	OLIVE DRAB, US ARMY, 613
	LD0012	OLIVE DRAB, US ARMY, 7
	RG0000	ORANGE
	RG0033	ORANGE, BURNT
	RG0073	ORANGE, COLOR ASSN OF THE US, 66074
	RG0050	ORANGE, COLOR ASSN OF THE US, 70070
	RG0007	ORANGE, GOLDEN
	RG0008	ORANGE, INDIAN
	RG0009	ORANGE, INTERNATIONAL
	RG0001	ORANGE-RED
	PK0000	PINK
	PK0003	PINK, ANGEL
	PK0016	PINK, BABY
	PK0009	PINK, DARK
	PK0011	PINK, DEEP
	PK0013	PINK, ROSE
	PU0000	PURPLE
	RE0000	RED
	RE0087	RED, AMERICAN BEAUTY
	RE0009	RED, BRIGHT
	RE0011	RED, CARDINAL
	RE0103	RED, COLOR ASSN OF THE US, 66073
	RE0204	RED, COLOR ASSN OF THE US, 70052
	RE0199	RED, COLOR ASSN OF THE US, 70179
	RE0035	RED, DARK
	RE0068	RED, FED STD 595, 11105
	RE0121	RED, FED STD 595, 21136
	RE0083	RED, JOCKEY
	RE0014	RED, MEDIUM
	RE0015	RED, OLD GLORY
	RE0091	RED, OLD GLORY, COLOR ASSN OF THE US, 70180
	RE0006	ROSE
	RE0007	ROSE, AMERICAN BEAUTY
	RE0036	ROSE, DARK
	RE0037	ROSE, DEEP
	RE0038	ROSE, DUSTY
	RE0041	ROSE, HENNA
	RE0102	ROSE, HENNA, GLENN L. MARTIN, C1084
	RE0084	ROSE, JUNE
	RE0043	ROSE, LIGHT
	RE0016	ROSE, OLD
	RE0021	ROSE, SALMON
	RE0025	ROSE, WILD
	RE0019	ROSEBUD
	RU0000	RUSSET
	RU0002	RUSSET, COLOR ASSN OF THE US, 66025
	RE0033	RUST
	RE0044	RUST, LIGHT
	RE0030	RUST, MEDIUM
	MS0049	SAND
	RE0022	SCARLET
	RE0071	SCARLET, COLOR ASSN OF THE US, 65006
	RE0104	SCARLET, COLOR ASSN OF THE US, 66040
	MS0052	SLATE
	TA0000	TAN
	TA0017	TAN, COLOR ASSN OF THE US, 66041
	TA0018	TAN, COLOR ASSN OF THE US, 66047
	TA0027	TAN, COLOR ASSN OF THE US, 70128
	TA0003	TAN, LIGHT
	TA0016	TAN, US AIR FORCE, 1505
	TA0092	TAN, US ARMY, 459
	MS0054	TAUPE
	MS0378	TAUPE, COLOR ASSN OF THE US, 66032
	MS0095	TAUPE, LIGHT
	TR0000	TURQUOISE
	TR0006	TURQUOISE, LIGHT
	TR0007	TURQUOISE, MEDIUM
	VL0000	VIOLET
	VL0009	VIOLET, LIGHT
	WA0000	WALNUT
	WH0000	WHITE
	WH0055	WHITE, COLOR ASSN OF THE US, 66050
	WH0029	WHITE, COLOR ASSN OF THE US, 70001
	WH0023	WHITE, NATURAL
	WH0054	WHITE, NATURAL, COLOR ASSN OF THE US, 66049
	WH0040	WHITE, PLATINUM
	RE0026	WINE
	YE0000	YELLOW
	YE0051	YELLOW, BABY
	YE0052	YELLOW, BRIGHT
	YE0066	YELLOW, COLOR ASSN OF THE US, 66059
	YE0012	YELLOW, DARK
	YE0036	YELLOW, FED STD 595, 13538
	YE0019	YELLOW, LEMON
	YE0065	YELLOW, LEMON, COLOR ASSN OF THE US, 70205
	YE0018	YELLOW, LIGHT
	YE0009	YELLOW, PALE
	YE0011	YELLOW, SPANISH
	YE0063	YELLOW, SPANISH, COLOR ASSN OF THE US, 70068

ADAV*JOVERALL DIAMETER

A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AJXE*ASIZE DESIGNATOR

A DESIGNATION INDICATING THE SIZE BY WHICH THE ITEM IS COMMERCIALLY KNOWN AND/OR IDENTIFIED.

Enter the alpha-numeric reply with a minimum of one character.

(AJXEAF1)

IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (BWCM and BWCN and BWCP and ABRY)

IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYH and BWCM and BWCQ and ABRY)

IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYE and AJYH and BWCM and ABRY)

IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYE and BWCM and BWCQ and ABRY)

IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYE and BWCM and ABRY)

IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC AJXF, YOU MUST ANSWER MRC (AJYH and ABRY)

AJXFLROPE STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ROPE.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(AJXFL5)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAE1404	1	DOUBLE LOOP
AAE1405	2	LOOP AND PLAIN END
AAE1406	3	THIMBLE AND PLAIN END
AAE1407	4	THIMBLE AND LOOP
AAE1408	5	DOUBLE THIMBLE
AAE1409	6	PLAIN ENDS

BWCQ*JINNER PERIMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BWCQJFA2.0*;BWCQJFA2.0$$JFA2.1*)

Table 1
	Reply Code (AA05)	Reply
	F	FEET
	A	INCHES
	M	METERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BWCN*JFIRST INNER PERIMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BWCNJAC2.0*;BWCNJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	F	FEET
	A	INCHES
	M	METERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BWCP*JSECOND INNER PERIMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BWCPJAB2.0*;BWCPJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	F	FEET
	A	INCHES
	M	METERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BWCM*DLOOP RETENTION METHOD

THE MEANS USED FOR RETAINING A LOOP.

Enter the applicable reply code from the table below

(BWCMDABH*;BWCMDBEK$$DBEL*)

Table 1
	Reply Code (AM39)	Reply
	ABH	CLAMP
	AFL	CLIP
	BFN	KNOTTED
	BFP	SEWED
	BEK	SPLICE
	BEL	SPLICED/SERVED

IF STYLE/REPLY CODE(s) 1 OR 2 WERE ENTERED FOR MRC AJYE, YOU MUST ANSWER MRC (AARX and ABKV)

IF STYLE/REPLY CODE(s) 3, 4, 5, 6, 7, 8 OR 9 WERE ENTERED FOR MRC AJYE, YOU MUST ANSWER MRC (CQGS and CQTC)

IF STYLE/REPLY CODE(s) 10, 11, 15, 16, 17, 18 OR 19 WERE ENTERED FOR MRC AJYE, YOU MUST ANSWER MRC (CQGS and CQTC)

IF STYLE/REPLY CODE(s) 12, 13 OR 14 WERE ENTERED FOR MRC AJYE, YOU MUST ANSWER MRC (ACXJ and ACXU)

AJYE*LTHIMBLE STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE THIMBLE.

(AJYEL13*;AJYEL10$$L5*)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAE1463	1	ROUND
AAE1472	10	OVAL W/LUGS
AAE1473	11	OVAL W/LUGS AND COVER PLATES
AAE1474	12	SOLID
AAE1475	13	SOLID
AAE1476	14	SOLID
AAE1477	15	EQUALIZING
AAE1478	16	EQUALIZING
AAE1479	17	CRESCENT W/LINK
AAE1480	18	CRESCENT
AAE1481	19	SPLIT OVAL
AAE1464	2	SPLIT ROUND
AAE1465	3	SPLIT OVAL
AAE1466	4	SPLIT OVAL
AAE1467	5	SPLIT OVAL
AAE1468	6	OVAL
AAE1469	7	OVAL
AAE1470	8	OVAL
AAE1471	9	REINFORCED OVAL

AARX*JINSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AARXJAA2.0*;AARXJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKV*JOUTSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKVJAB2.0*;ABKVJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ACXJ*JOVERALL WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ACXJJAA2.0*;ACXJJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ACXU*JPINHOLE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A PINHOLE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ACXUJAC2.0*;ACXUJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CQGS*JTHIMBLE INSIDE WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CQGSJAA2.0*;CQGSJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CQTC*JTHIMBLE INSIDE LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CQTCJAB2.0*;CQTCJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AJYH*DROPE END CONDITIONING METHOD

THE MEANS USED TO PREVENT UNRAVELING OF THE ROPE ENDS.

Enter the applicable reply code from the table below

(AJYHDA*;AJYHDJA$$DHK*)

Table 1
	Reply Code (AA62)	Reply
	A	ANY ACCEPTABLE
	HF	BACK SPLICED
	HZ	CLAMPED
	HH	HEAT SEALED
	JA	KNOTTED
	HK	SERVED
	JB	SEWED

ABHP*JOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJLB2.0*;ABHPJLB2.0$$JLB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABVV*JPIN DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A PIN,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABVVJAA2.0*;ABVVJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ACVU*JSTOCK DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE STOCK,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ACVUJAB2.0*;ACVUJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADJT*JINSIDE WIDTH

AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADJU*JINSIDE LENGTH

A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADJUJAA2.0*;ADJUJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AGCW*JWIRE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE WIRE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AGCWJLB2.0*;AGCWJLB2.0$$JLB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AHMS*JUPPER LOOP INSIDE DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AHMSJLA2.0*;AHMSJLA2.0$$JLA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AHMT*JLOWER LOOP INSIDE DIAMETER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AHMTJLA2.0*;AHMTJLA2.0$$JLA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AHNS*JLEG END THICKNESS

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AHNSJAC2.0*;AHNSJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AJRE*JBEARING SURFACE TO BEARING SURFACE DISTANCE

NONE.MRC DISCONTINUED FOR GENERAL USE, MRC MAINTAINED FOR DTRA USE ONLY.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AJREJLB2.0*;AJREJLB2.0$$JLB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AJRP*JINSIDE WIDTH BETWEEN EYES

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AJRPJAB2.0*;AJRPJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BRYZ*JDISTANCE ACROSS THROAT

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BRYZJAC2.0*;BRYZJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CTZR*JDISTANCE FROM BAIL CENTER TO HOLE CENTER

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CTZRJAB2.0*;CTZRJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

AFJQ*JSTORAGE TEMP RANGE

THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.

(AFJQJFM32.0/P50.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

AFJF*DSPECIFIC USE

THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.

Enter the applicable reply code from the table below

(AFJFDLS*;AFJFDQF$DQB*)

Table 1
	Reply Code (AD34)	Reply
	QA	BASTING
	LP	BRAIDING
	QB	CARPET STITCHING
	LQ	COIL WINDING MACHINE
	QC	CROCHETING
	QD	DARNING
	LR	HAND KNITTING
	QE	HEAVY LEATHER
	LS	LUBRICATING
	QF	RUG WEAVING
	LT	WEAVING