A gear, cylindrical or conical in form, with teeth on the outer surface used for the accurate transmission of motion.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3ACK added to MRC MATT.
ISAC Reply 3ADX added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3DPV added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1H deleted from MRC MATT.
ISAC Reply 1J deleted from MRC MATT.
ISAC Reply 1K deleted from MRC MATT.
ISAC Reply 1L deleted from MRC MATT.
ISAC Reply 1M deleted from MRC MATT.
ISAC Reply 1N deleted from MRC MATT.
ISAC Reply 1P deleted from MRC MATT.
ISAC Reply 1Q deleted from MRC MATT.
ISAC Reply 1R deleted from MRC MATT.
ISAC Reply 1S deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3ACK added to MRC MDCL.
ISAC Reply 3ADX added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3DPV added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1H deleted from MRC MDCL.
ISAC Reply 1J deleted from MRC MDCL.
ISAC Reply 1K deleted from MRC MDCL.
ISAC Reply 1L deleted from MRC MDCL.
ISAC Reply 1M deleted from MRC MDCL.
ISAC Reply 1N deleted from MRC MDCL.
ISAC Reply 1P deleted from MRC MDCL.
ISAC Reply 1Q deleted from MRC MDCL.
ISAC Reply 1R deleted from MRC MDCL.
ISAC Reply 1S deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1G deleted from MRC SFTT.
ISAC Reply 1H deleted from MRC SFTT.
ISAC Reply 1J deleted from MRC SFTT.
ISAC Reply 1K deleted from MRC SFTT.
ISAC Reply 1L deleted from MRC SFTT.
ISAC Reply 1M deleted from MRC SFTT.
ISAC Reply 1N deleted from MRC SFTT.
ISAC Reply 1P deleted from MRC SFTT.
ISAC Reply 1Q deleted from MRC SFTT.
ISAC Reply 1R deleted from MRC SFTT.
ISAC Reply 1S deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1G deleted from MRC STDC.
ISAC Reply 1H deleted from MRC STDC.
ISAC Reply 1J deleted from MRC STDC.
ISAC Reply 1K deleted from MRC STDC.
ISAC Reply 1L deleted from MRC STDC.
ISAC Reply 1M deleted from MRC STDC.
ISAC Reply 1N deleted from MRC STDC.
ISAC Reply 1P deleted from MRC STDC.
ISAC Reply 1Q deleted from MRC STDC.
ISAC Reply 1R deleted from MRC STDC.
ISAC Reply 1S deleted from MRC STDC.
ISAC Reply 3AAT added to MRC CQFM.
ISAC Reply 3AEE added to MRC CQFM.
ISAC Reply 3HOU added to MRC CQFM.
ISAC Reply 1A deleted from MRC CQFM.
ISAC Reply 1B deleted from MRC CQFM.
ISAC Reply 1C deleted from MRC CQFM.
ISAC Reply 1D deleted from MRC CQFM.
ISAC Reply 1E deleted from MRC CQFM.
ISAC Reply 1F deleted from MRC CQFM.
ISAC Reply 1G deleted from MRC CQFM.
ISAC Reply 1H deleted from MRC CQFM.
ISAC Reply 1J deleted from MRC CQFM.
ISAC Reply 1K deleted from MRC CQFM.
ISAC Reply 1L deleted from MRC CQFM.
ISAC Reply 1M deleted from MRC CQFM.
ISAC Reply 1N deleted from MRC CQFM.
ISAC Reply 1P deleted from MRC CQFM.
ISAC Reply 1Q deleted from MRC CQFM.
ISAC Reply 1R deleted from MRC CQFM.
ISAC Reply 1S deleted from MRC CQFM.
ISAC Reply 3AEE added to MRC CWQL.
ISAC Reply 3AET added to MRC CWQL.
ISAC Reply 3AEU added to MRC CWQL.
ISAC Reply 3AEV added to MRC CWQL.
ISAC Reply 3EER added to MRC CWQL.
ISAC Reply 3HOU added to MRC CWQL.
ISAC Reply 1A deleted from MRC CWQL.
ISAC Reply 1B deleted from MRC CWQL.
ISAC Reply 1C deleted from MRC CWQL.
ISAC Reply 1D deleted from MRC CWQL.
ISAC Reply 1E deleted from MRC CWQL.
ISAC Reply 1F deleted from MRC CWQL.
ISAC Reply 1G deleted from MRC CWQL.
ISAC Reply 1H deleted from MRC CWQL.
ISAC Reply 1J deleted from MRC CWQL.
ISAC Reply 1K deleted from MRC CWQL.
ISAC Reply 3AEE added to MRC CWQR.
ISAC Reply 3AEE added to MRC CWQR.
ISAC Reply 3AEV added to MRC CWQR.
ISAC Reply 3AEV added to MRC CWQR.
ISAC Reply 3EER added to MRC CWQR.
ISAC Reply 3EER added to MRC CWQR.
ISAC Reply 3HOU added to MRC CWQR.
ISAC Reply 3HOU added to MRC CWQR.
ISAC Reply 1A deleted from MRC CWQR.
ISAC Reply 1B deleted from MRC CWQR.
ISAC Reply 1C deleted from MRC CWQR.
ISAC Reply 1D deleted from MRC CWQR.
ISAC Reply 1E deleted from MRC CWQR.
ISAC Reply 1F deleted from MRC CWQR.
ISAC Reply 1G deleted from MRC CWQR.
ISAC Reply 1H deleted from MRC CWQR.
ISAC Reply 1J deleted from MRC CWQR.
ISAC Reply 1K deleted from MRC CWQR.
ISAC Reply 3AEE added to MRC CWRB.
ISAC Reply 3AET added to MRC CWRB.
ISAC Reply 3AEV added to MRC CWRB.
ISAC Reply 3EER added to MRC CWRB.
ISAC Reply 3HOU added to MRC CWRB.
ISAC Reply 1A deleted from MRC CWRB.
ISAC Reply 1B deleted from MRC CWRB.
ISAC Reply 1C deleted from MRC CWRB.
ISAC Reply 1D deleted from MRC CWRB.
ISAC Reply 1E deleted from MRC CWRB.
ISAC Reply 1F deleted from MRC CWRB.
ISAC Reply 1G deleted from MRC CWRB.
ISAC Reply 1H deleted from MRC CWRB.
ISAC Reply 1J deleted from MRC CWRB.
ISAC Reply 1K deleted from MRC CWRB.
ISAC Reply 3AEE added to MRC ANTP.
ISAC Reply 3AEE added to MRC ANTP.
ISAC Reply 3AEE added to MRC ANTP.
ISAC Reply 3AEV added to MRC ANTP.
ISAC Reply 3AEV added to MRC ANTP.
ISAC Reply 3AEV added to MRC ANTP.
ISAC Reply 3EER added to MRC ANTP.
ISAC Reply 3EER added to MRC ANTP.
ISAC Reply 3EER added to MRC ANTP.
ISAC Reply 3HOU added to MRC ANTP.
ISAC Reply 3HOU added to MRC ANTP.
ISAC Reply 3HOU added to MRC ANTP.
ISAC Reply 1A deleted from MRC ANTP.
ISAC Reply 1B deleted from MRC ANTP.
ISAC Reply 1C deleted from MRC ANTP.
ISAC Reply 1D deleted from MRC ANTP.
ISAC Reply 1E deleted from MRC ANTP.
ISAC Reply 1F deleted from MRC ANTP.
ISAC Reply 1G deleted from MRC ANTP.
ISAC Reply 1H deleted from MRC ANTP.
ISAC Reply 1J deleted from MRC ANTP.
ISAC Reply 1K deleted from MRC ANTP.
ISAC Reply 3AEE added to MRC CWRS.
ISAC Reply 3AEV added to MRC CWRS.
ISAC Reply 3EER added to MRC CWRS.
ISAC Reply 3HOU added to MRC CWRS.
ISAC Reply 1A deleted from MRC CWRS.
ISAC Reply 1B deleted from MRC CWRS.
ISAC Reply 1C deleted from MRC CWRS.
ISAC Reply 1D deleted from MRC CWRS.
ISAC Reply 1E deleted from MRC CWRS.
ISAC Reply 1F deleted from MRC CWRS.
ISAC Reply 1G deleted from MRC CWRS.
ISAC Reply 1H deleted from MRC CWRS.
ISAC Reply 1J deleted from MRC CWRS.
ISAC Reply 1K deleted from MRC CWRS.
ISAC Reply 3AEE added to MRC CWRX.
ISAC Reply 3AEV added to MRC CWRX.
ISAC Reply 3HOU added to MRC CWRX.
ISAC Reply 1A deleted from MRC CWRX.
ISAC Reply 1B deleted from MRC CWRX.
ISAC Reply 1C deleted from MRC CWRX.
ISAC Reply 1D deleted from MRC CWRX.
ISAC Reply 1E deleted from MRC CWRX.
ISAC Reply 1F deleted from MRC CWRX.
ISAC Reply 1G deleted from MRC CWRX.
ISAC Reply 1H deleted from MRC CWRX.
ISAC Reply 1J deleted from MRC CWRX.
ISAC Reply 1K deleted from MRC CWRX.
ISAC Reply 3AEE added to MRC CWSB.
ISAC Reply 3EER added to MRC CWSB.
ISAC Reply 3HOU added to MRC CWSB.
ISAC Reply 1A deleted from MRC CWSB.
ISAC Reply 1B deleted from MRC CWSB.
ISAC Reply 1C deleted from MRC CWSB.
ISAC Reply 1D deleted from MRC CWSB.
ISAC Reply 1E deleted from MRC CWSB.
ISAC Reply 1F deleted from MRC CWSB.
ISAC Reply 1G deleted from MRC CWSB.
ISAC Reply 1H deleted from MRC CWSB.
ISAC Reply 1J deleted from MRC CWSB.
ISAC Reply 1K deleted from MRC CWSB.
ISAC Reply 1A deleted from MRC CWCN.
ISAC Reply 1B deleted from MRC CWCN.
ISAC Reply 1C deleted from MRC CWCN.
ISAC Reply 1D deleted from MRC CWCN.
ISAC Reply 1E deleted from MRC CWCN.
ISAC Reply 1F deleted from MRC CWCN.
ISAC Reply 1G deleted from MRC CWCN.
ISAC Reply 1H deleted from MRC CWCN.
ISAC Reply 1J deleted from MRC CWCN.
ISAC Reply 1K deleted from MRC CWCN.
ISAC Reply 3AEE added to MRC ABSA.
ISAC Reply 3AET added to MRC ABSA.
ISAC Reply 3AEV added to MRC ABSA.
ISAC Reply 3HOU added to MRC ABSA.
ISAC Reply 1A deleted from MRC ABSA.
ISAC Reply 1B deleted from MRC ABSA.
ISAC Reply 1C deleted from MRC ABSA.
ISAC Reply 1D deleted from MRC ABSA.
ISAC Reply 1E deleted from MRC ABSA.
ISAC Reply 1F deleted from MRC ABSA.
ISAC Reply 1G deleted from MRC ABSA.
ISAC Reply 1H deleted from MRC ABSA.
ISAC Reply 1J deleted from MRC ABSA.
ISAC Reply 1K deleted from MRC ABSA.
ISAC Reply 1A deleted from MRC ADDW.
ISAC Reply 1B deleted from MRC ADDW.
ISAC Reply 1C deleted from MRC ADDW.
ISAC Reply 1D deleted from MRC ADDW.
ISAC Reply 1E deleted from MRC ADDW.
ISAC Reply 1F deleted from MRC ADDW.
ISAC Reply 1G deleted from MRC ADDW.
ISAC Reply 1H deleted from MRC ADDW.
ISAC Reply 1J deleted from MRC ADDW.
ISAC Reply 1K deleted from MRC ADDW.
ISAC Reply 3AEE added to MRC CWSN.
ISAC Reply 3AEV added to MRC CWSN.
ISAC Reply 3HOU added to MRC CWSN.
ISAC Reply 1A deleted from MRC CWSN.
ISAC Reply 1B deleted from MRC CWSN.
ISAC Reply 1C deleted from MRC CWSN.
ISAC Reply 1D deleted from MRC CWSN.
ISAC Reply 1E deleted from MRC CWSN.
ISAC Reply 1F deleted from MRC CWSN.
ISAC Reply 1G deleted from MRC CWSN.
ISAC Reply 1H deleted from MRC CWSN.
ISAC Reply 1J deleted from MRC CWSN.
ISAC Reply 1K deleted from MRC CWSN.
ISAC Reply 3AEE added to MRC CWSR.
ISAC Reply 3AEV added to MRC CWSR.
ISAC Reply 3HOU added to MRC CWSR.
ISAC Reply 1A deleted from MRC CWSR.
ISAC Reply 1B deleted from MRC CWSR.
ISAC Reply 1C deleted from MRC CWSR.
ISAC Reply 1D deleted from MRC CWSR.
ISAC Reply 1E deleted from MRC CWSR.
ISAC Reply 1F deleted from MRC CWSR.
ISAC Reply 1G deleted from MRC CWSR.
ISAC Reply 1H deleted from MRC CWSR.
ISAC Reply 1J deleted from MRC CWSR.
ISAC Reply 1K deleted from MRC CWSR.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3EER added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1C deleted from MRC AAJF.
ISAC Reply 1D deleted from MRC AAJF.
ISAC Reply 1E deleted from MRC AAJF.
ISAC Reply 1F deleted from MRC AAJF.
ISAC Reply 1G deleted from MRC AAJF.
ISAC Reply 1H deleted from MRC AAJF.
ISAC Reply 1J deleted from MRC AAJF.
ISAC Reply 1K deleted from MRC AAJF.
ISAC Reply 3AEE added to MRC CWTR.
ISAC Reply 3AEV added to MRC CWTR.
ISAC Reply 3HOU added to MRC CWTR.
ISAC Reply 1A deleted from MRC CWTR.
ISAC Reply 1B deleted from MRC CWTR.
ISAC Reply 1C deleted from MRC CWTR.
ISAC Reply 1D deleted from MRC CWTR.
ISAC Reply 1E deleted from MRC CWTR.
ISAC Reply 1F deleted from MRC CWTR.
ISAC Reply 1G deleted from MRC CWTR.
ISAC Reply 1H deleted from MRC CWTR.
ISAC Reply 1J deleted from MRC CWTR.
ISAC Reply 1K deleted from MRC CWTR.
ISAC Reply 3AEE added to MRC CWTX.
ISAC Reply 3AEV added to MRC CWTX.
ISAC Reply 3HOU added to MRC CWTX.
ISAC Reply 1A deleted from MRC CWTX.
ISAC Reply 1B deleted from MRC CWTX.
ISAC Reply 1C deleted from MRC CWTX.
ISAC Reply 1D deleted from MRC CWTX.
ISAC Reply 1E deleted from MRC CWTX.
ISAC Reply 1F deleted from MRC CWTX.
ISAC Reply 1G deleted from MRC CWTX.
ISAC Reply 1H deleted from MRC CWTX.
ISAC Reply 1J deleted from MRC CWTX.
ISAC Reply 1K deleted from MRC CWTX.
ISAC Reply 3AEE added to MRC CWWN.
ISAC Reply 3AEV added to MRC CWWN.
ISAC Reply 3HOU added to MRC CWWN.
ISAC Reply 1A deleted from MRC CWWN.
ISAC Reply 1B deleted from MRC CWWN.
ISAC Reply 1C deleted from MRC CWWN.
ISAC Reply 1D deleted from MRC CWWN.
ISAC Reply 1E deleted from MRC CWWN.
ISAC Reply 1F deleted from MRC CWWN.
ISAC Reply 1G deleted from MRC CWWN.
ISAC Reply 1H deleted from MRC CWWN.
ISAC Reply 1J deleted from MRC CWWN.
ISAC Reply 1K deleted from MRC CWWN.
ISAC Reply 3AEE added to MRC CTQY.
ISAC Reply 3EEJ added to MRC CTQY.
ISAC Reply 3HOU added to MRC CTQY.
ISAC Reply 1A deleted from MRC CTQY.
ISAC Reply 1B deleted from MRC CTQY.
ISAC Reply 1C deleted from MRC CTQY.
ISAC Reply 1D deleted from MRC CTQY.
ISAC Reply 1E deleted from MRC CTQY.
ISAC Reply 1F deleted from MRC CTQY.
ISAC Reply 1G deleted from MRC CTQY.
ISAC Reply 1H deleted from MRC CTQY.
ISAC Reply 1J deleted from MRC CTQY.
ISAC Reply 1K deleted from MRC CTQY.
ISAC Reply 1L deleted from MRC CTQY.
ISAC Reply 1M deleted from MRC CTQY.
ISAC Reply 1N deleted from MRC CTQY.
ISAC Reply 1P deleted from MRC CTQY.
ISAC Reply 1A deleted from MRC CWZK.
ISAC Reply 1B deleted from MRC CWZK.
ISAC Reply 1C deleted from MRC CWZK.
ISAC Reply 1D deleted from MRC CWZK.
ISAC Reply 1E deleted from MRC CWZK.
ISAC Reply 1F deleted from MRC CWZK.
ISAC Reply 1G deleted from MRC CWZK.
ISAC Reply 1H deleted from MRC CWZK.
ISAC Reply 1J deleted from MRC CWZK.
ISAC Reply 1K deleted from MRC CWZK.
ISAC Reply 1L deleted from MRC CWZK.
ISAC Reply 1M deleted from MRC CWZK.
ISAC Reply 1N deleted from MRC CWZK.
ISAC Reply 1P deleted from MRC CWZK.
MRC CWRF has been deleted
MRC CWRK has been deleted
MRC CWRP has been deleted
MRC CWSF has been deleted
MRC CWSK has been deleted
MRC BDTX has been deleted
MRC BDYK has been deleted
MRC CWSW has been deleted
MRC CWTB has been deleted
MRC CWTG has been deleted
MRC THSD has been deleted
MRC CQJX has been deleted
MRC CMLP has been deleted
MRC CQQR has been deleted
MRC AAJD has been deleted
MRC CTTC has been deleted
MRC AAJE has been deleted
MRC CWTK has been deleted
MRC CWWC has been deleted
MRC CWWH has been deleted
MRC CWWS has been deleted
MRC CWXB has been deleted
MRC CWXG has been deleted
MRC CWXL has been deleted
MRC CWXP has been deleted
MRC CWXT has been deleted
MRC CWXY has been deleted
MRC CWYD has been deleted
MRC CWYL has been deleted
MRC CWYR has been deleted
MRC CWYW has been deleted
MRC CWZC has been deleted
MRC CXRX has been deleted
MRC CXRY has been deleted
MRC CXRZ has been deleted
MRC CMLK has been deleted
MRC CQLT has been deleted
MRC CMLM has been deleted
MRC CRNZ has been deleted
MRC CWKJ has been deleted
MRC CWZN has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED50798*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3ADXDCRB000*;MATT3ADXDCRB000$DFEA000*;MATT3ADXDCRB000$$DFEA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3DPV | CLAMP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| ASA000 | ASBESTOS |
| BND000 | BRONZE |
| CSA000 | CELLULOSE |
| CRB000 | CHROMIUM ALLOY |
| CTB000 | COBALT ALLOY |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| LBF000 | DISULFIDE MOLYBDENUM |
| FBT000 | FLAX |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| RCE000 | RUBBER |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACK | BUSHING |
| 3ADX | WASHER |
| 3AEE | OVERALL |
| 3DPV | CLAMP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDAUA000*;SFTT3AEEDAUA000$DCMA000*;SFTT3AEEDAUA000$$DCMA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CNA000 | CARBON |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| DCC000 | DICHROMATE ZINC |
| ENA000 | ENAMEL |
| AUA000 | GOLD |
| GFA000 | GRAPHITE |
| IRA000 | IRIDIUM |
| FEA000 | IRON |
| LQA000 | LACQUER |
| LCB000 | LUBRICANT |
| LCC000 | LUBRICANT DRY FILM |
| MTB000 | MOLYBDENUM |
| NLA000 | NICKEL |
| LCA000 | OIL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| XXC000 | OXIDE IRON |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHB000 | PHOSPHATE IRON |
| PHC000 | PHOSPHATE MANGANESE |
| PHD000 | PHOSPHATE ZINC |
| PCA000 | PLASTIC |
| PCF000 | PLASTIC POLYAMIDE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| RHA000 | RHODIUM |
| SLA000 | SILICON |
| AGA000 | SILVER |
| SNA000 | TIN |
| SNB000 | TIN ALLOY |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CQFM*JHARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF AN ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQFM3AATJSDC2.0*;CQFM3AATJSDC2.0$JSDC2.0*;CQFM3AATJSDC2.0$$JSDC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC26) | Reply |
| BH | BRINELL HULTGREN |
| BS | BRINELL STANDARD |
| BT | BRINELL TUNGSTEN CARBIDE |
| RA | ROCKWELL A |
| RB | ROCKWELL B |
| RC | ROCKWELL C |
| RD | ROCKWELL D |
| RF | ROCKWELL F |
| RG | ROCKWELL G |
| RQ | ROCKWELL H |
| RS | ROCKWELL SUPERFICIAL 15-N |
| RU | ROCKWELL SUPERFICIAL 30-N |
| RN | ROCKWELL SUPERFICIAL 45-N |
| SA | SHORE DUROMETER A |
| SM | SHORE DUROMETER A-2 |
| SB | SHORE DUROMETER B |
| SE | SHORE DUROMETER C |
| SD | SHORE DUROMETER D |
| AF | VICKERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJLAATEETH QUANTITY
THE NUMBER OF TEETH INCLUDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJLAA10*)
AEVE*AKEYWAY QUANTITY
THE NUMBER OF KEYWAYS CONTAINED IN OR ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AEVEA10*)
AXHQ*AGROOVE QUANTITY
THE NUMBER OF GROOVES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AXHQA10*)
ATPC*ASTEP QUANTITY
THE NUMBER OF STEPS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ATPCA10*)
CWNH*DTOOTH FORM
AN INDICATION AS TO WHETHER THE TEETH ARE A STANDARD DEPTH OR MODIFIED TO A SHORTER DEPTH.
Enter the applicable reply code from the table below
(CWNHDDCR)
| Table 1 |
| Reply Code (AK54) | Reply |
| CEP | SPECIAL |
| ASG | STANDARD |
| DCR | STUB |
CWPPJPRESSURE ANGLE
THE MEASUREMENT OF THE PRESSURE ANGLE ON THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWPPJD2.0*;CWPPJD2.0$$JD2.1*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
CWWK*DPRECISION CLASSIFICATION
THE QUALITY DESIGNATION OF AN ITEM AS DETERMINED BY INDUSTRY,ASSOCIATION,OR MANUFACTURER STANDARDS.
Enter the applicable reply code from the table below
(CWWKDAD*;CWWKDBM$DAP*)
| Table 1 |
| Reply Code (AP71) | Reply |
| AJ | ACCURACY GRADE 10 |
| AK | ACCURACY GRADE 11 |
| AL | ACCURACY GRADE 12 |
| AB | ACCURACY GRADE 3 |
| AC | ACCURACY GRADE 4 |
| AD | ACCURACY GRADE 5 |
| AE | ACCURACY GRADE 6 |
| AF | ACCURACY GRADE 7 |
| AG | ACCURACY GRADE 8 |
| AH | ACCURACY GRADE 9 |
| BC | IS0 PRECISION CLASS 1 |
| BM | ISO PRECISION CLASS 10 |
| BN | ISO PRECISION CLASS 11 |
| BP | ISO PRECISION CLASS 12 |
| BD | ISO PRECISION CLASS 2 |
| BE | ISO PRECISION CLASS 3 |
| BF | ISO PRECISION CLASS 4 |
| BG | ISO PRECISION CLASS 5 |
| BH | ISO PRECISION CLASS 6 |
| BJ | ISO PRECISION CLASS 7 |
| BK | ISO PRECISION CLASS 8 |
| BL | ISO PRECISION CLASS 9 |
| AU | QUALITY NUMBER 10 |
| AV | QUALITY NUMBER 11 |
| AW | QUALITY NUMBER 12 |
| AX | QUALITY NUMBER 13 |
| AY | QUALITY NUMBER 14 |
| AZ | QUALITY NUMBER 15 |
| BA | QUALITY NUMBER 16 |
| AM | QUALITY NUMBER 3 |
| AN | QUALITY NUMBER 4 |
| AP | QUALITY NUMBER 5 |
| AQ | QUALITY NUMBER 6 |
| AR | QUALITY NUMBER 7 |
| AS | QUALITY NUMBER 8 |
| AT | QUALITY NUMBER 9 |
| BB | ULTRA PRECISION CLASS 1 |
BDZQ*DBACKLASH DESIGNATION
A DESIGNATION INDICATING THE BACKLASH QUALITY OF AN ITEM.
Enter the applicable reply code from the table below
(BDZQDAK)
| Table 1 |
| Reply Code (AE99) | Reply |
| AK | GRADE A |
| AL | GRADE B |
| BJ | GRADE C |
| FT | GRADE D |
| FW | GRADE E |
IF STYLE/REPLY CODE(s) 1 OR 6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM)
IF STYLE/REPLY CODE(s) 2 OR 4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM and CWQL and CWRB)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWNK and CWCD and CWPS and CWRM and CWSH)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWNK and CWCD and CWNY and CWPS and CWRM and CWSH and CWYN)
IF STYLE/REPLY CODE(s) 36, 38, 46 OR 48 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM)
IF STYLE/REPLY CODE(s) 42 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 43 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD)
IF STYLE/REPLY CODE(s) 44 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWNK and CWCD and CWPS)
IF STYLE/REPLY CODE(s) 50 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWMY and CWFR and CWRM and CWCK)
IF STYLE/REPLY CODE(s) 53 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWMY and CWFR and CWCD and CWRM and CWCK)
IF STYLE/REPLY CODE(s) 62 OR 66 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWRM and CWWF and CWXD)
IF STYLE/REPLY CODE(s) 65 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWFR and CWRM and CWWF and CWXD)
IF STYLE/REPLY CODE(s) 67 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWFR and CWRM and CWWF and CWXD and CWQL)
IF STYLE/REPLY CODE(s) 5, 17 OR 21 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 25, 27, 29, 30, 39, 40, 47 OR 49 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 54, 55 OR 56 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWCD and AGJS and CWFR and CWRM and CWTN and CWQL)
IF STYLE/REPLY CODE(s) 57 OR 59 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWRM and CWWF and CWXD and CWQL)
IF STYLE/REPLY CODE(s) 58 OR 60 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWFR and CWRM and CWWF and CWXD and CWQL)
IF STYLE/REPLY CODE(s) 42A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM)
IF STYLE/REPLY CODE(s) 49A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 49B WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWNK and CWCD and CWPS and CWRB)
IF STYLE/REPLY CODE(s) 68 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWWF and CWXD and CWRB)
IF STYLE/REPLY CODE(s) 9, 16 OR 19 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 28 OR 34 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 15, 18 OR 22 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM and CWQL and CWRB)
IF STYLE/REPLY CODE(s) 31 OR 35 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM and CWQL and CWRB)
IF STYLE/REPLY CODE(s) 61 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWFR and CWRM and CWWF and CWXD and CWQL and CWRB)
IF STYLE/REPLY CODE(s) 10 OR 13 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM)
IF STYLE/REPLY CODE(s) 24, 26, 33 OR 41 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM)
IF STYLE/REPLY CODE(s) 7 OR 14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM and CWRB)
IF STYLE/REPLY CODE(s) 20, 23 OR 32 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM and CWRB)
IF STYLE/REPLY CODE(s) 63 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWRM and CWWF and CWXD and CWRB)
IF STYLE/REPLY CODE(s) 64 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWFR and CWRM and CWWF and CWXD and CWRB)
IF STYLE/REPLY CODE(s) 45 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM and CWRB)
IF STYLE/REPLY CODE(s) 51 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWMY and CWFR and CWRM and CWCK)
IF STYLE/REPLY CODE(s) 52 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (CWMY and CWFR and CWCD and CWRM and CWCK)
IF STYLE/REPLY CODE(s) 27A WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM)
IF STYLE/REPLY CODE(s) 37 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 27B WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWCD and CWRM and CWQL)
IF STYLE/REPLY CODE(s) 49C WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGJS and CWFR and CWNK and CWCD and CWPS)
IF STYLE/REPLY CODE(s) 69 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (BDJT and CWFR and CWRM and CWWF and CWXD)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL33)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AD10001 | 1 | HUBLESS |
| AD10010 | 10 | ONE FLUSH HUB, ONE RECESSED HUB |
| AD10011 | 11 | FLANGED END |
| AD10012 | 12 | FLANGED END WITH PILOT |
| AD10013 | 13 | RECESSED HUB |
| AD10014 | 14 | FLUSH HUB |
| AD10015 | 15 | CONE SHAPE BODY, PROTRUDING HUB |
| AD10016 | 16 | CONE SHAPE BODY, PROTRUDING HUB, RECESSED HUB |
| AD10017 | 17 | CONE SHAPE BODY, PROTRUDING HUBS |
| AD10018 | 18 | BELL SHAPE BODY, PROTRUDING HUB |
| AD10019 | 19 | BELL SHAPE BODY, PROTRUDING HUB, RECESSED HUB |
| AD10002 | 2 | PROTRUDING HUB |
| AD10020 | 20 | BELL SHAPE BODY, HUBLESS |
| AD10021 | 21 | BELL SHAPE BODY, PROTRUDING HUBS |
| AD10022 | 22 | PROTRUDING HUB, RECESSED BODY |
| AD10023 | 23 | CONE SHAPE BODY, HUBLESS |
| AD10024 | 24 | CONE SHAPE BODY, RECESSED HUB |
| AD10025 | 25 | CONE SHAPE BODY, PROTRUDING HUB |
| AD10026 | 26 | BELL SHAPE BODY, RECESSED HUB |
| AD10027 | 27 | BELL SHAPE BODY, PROTRUDING HUB |
| AD10028 | 27A | FLUSH HUB |
| AD10029 | 27B | PROTRUDING HUBS |
| AD10030 | 28 | SIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| AD10031 | 29 | SIDE FACE, FRONT HUB FLUSH, BACK HUB PROTRUDING |
| AD10003 | 3 | RECESSED HUBS |
| AD10032 | 30 | SIDE FACE, PROTRUDING HUBS |
| AD10033 | 31 | SIDE FACE, BACK HUB PROTRUDING |
| AD10034 | 32 | SIDE FACE, HUBLESS |
| AD10035 | 33 | SIDE FACE, RECESSED HUBS |
| AD10036 | 34 | SIDE FACE, FRONT HUB PROTRUDING, BACK HUB RECESSED |
| AD10037 | 35 | SIDE FACE, FRONT HUB PROTRUDING |
| AD10038 | 36 | PERIPHERAL FACE, FRONT HUB FLUSH |
| AD10039 | 37 | PERIPHERAL FACE, FRONT HUB PROTRUDING |
| AD10040 | 38 | PERIPHERAL FACE, HUBLESS |
| AD10041 | 39 | PERIPHERAL FACE, BACK HUB PROTRUDING |
| AD10004 | 4 | PROTRUDING HUBS |
| AD10042 | 40 | PERIPHERAL FACE, PROTRUDING HUBS |
| AD10043 | 41 | SIDE FACE, BACK HUB RECESSED |
| AD10044 | 42 | PERIPHERAL FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| AD10045 | 42A | PERIPHERAL FACE, FRONT HUB RECESSED |
| AD10047 | 43 | PLAIN RING |
| AD10048 | 44 | FLANGED RING |
| AD10049 | 45 | RECESSED RING |
| AD10050 | 46 | SOLID BACK RING, HUBLESS |
| AD10051 | 47 | SOLID BACK RING, PROTRUDING HUB, RECESSED HUB |
| AD10052 | 48 | CONE, HUBLESS |
| AD10053 | 49 | CONE, PROTRUDING HUB |
| AD10054 | 49A | SOLID BACK RING, PROTRUDING HUB |
| AD10055 | 49B | RECESSED RING FLANGE, TYPE HUB |
| AD10056 | 49C | FLANGED RING |
| AD10005 | 5 | ONE PROTRUDING HUB, ONE FLUSH HUB |
| AD10057 | 50 | SQUARE OR RECTANGULAR |
| AD10058 | 51 | SQUARE OR RECTANGULAR, BOSS MOUNTED |
| AD10059 | 52 | ROUND, BOSS MOUNTED |
| AD10060 | 53 | ROUND |
| AD10061 | 54 | ADJUSTABLE TORQUE, COIL SPRING LOADED |
| AD10062 | 55 | ADJUSTABLE TORQUE, SPRING WASHER LOADED |
| AD10063 | 56 | FIXED TORQUE, SPRING WASHER LOADED |
| AD10064 | 57 | PROTRUDING HUBS |
| AD10065 | 58 | SIDE FACE, PROTRUDING HUBS |
| AD10066 | 59 | PROTRUDING HUB |
| AD10006 | 6 | FLUSH HUB |
| AD10067 | 60 | SIDE FACE, FRONT HUB FLUSH, BACK HUB PROTRUDING |
| AD10068 | 61 | BACK HUB PROTRUDING |
| AD10069 | 62 | HUBLESS |
| AD10070 | 63 | HUBLESS, RECESSED BODY |
| AD10071 | 64 | HUBLESS |
| AD10072 | 65 | FRONT HUB FLUSH |
| AD10073 | 66 | PLAIN RING |
| AD10074 | 67 | PROTRUDING HUBS |
| AD10075 | 68 | CONE SHAPE BODY, HUBLESS |
| AD10076 | 69 | BACK HUB PROTRUDING |
| AD10007 | 7 | HUBLESS, RECESSED BODY |
| AD10008 | 8 | PROTRUDING HUB, RECESSED BODY |
| AD10009 | 9 | ONE PROTRUDING HUB, ONE RECESSED HUB |
AGJS*JPITCH DIAMETER
A MEASUREMENT INDICATING THE DIAMETER-PITCH PER SPECIFIC MEASUREMENT SCALE OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGJSJAB2.0*;AGJSJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BDJT*JPITCH RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BDJTJAA2.0*;BDJTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWMY*JPITCH HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWMYJAB2.0*;CWMYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWFR*JNOMINAL OVERALL LENGTH
THE NOMINAL DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWFRJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWNK*JFLANGE NOMINAL DIAMETER
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWNKJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCD*JNOMINAL OUTSIDE DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN ITEM,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCDJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWNY*JPILOT NOMINAL LENGTH
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWNYJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWPS*JFLANGE NOMINAL THICKNESS
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWPSJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRM*JFACE NOMINAL WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE FACE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRMJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWSH*JNOMINAL DISTANCE BETWEEN OUTER BODY FACE AND INNER FLANGE FACE
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWTN*JNOMINAL DISTANCE BETWEEN FACE EDGE AND BODY END
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWTNJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWWF*JNOMINAL OUTSIDE RADIUS
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWFJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWXD*JARC NOMINAL LENGTH
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWXDJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWYN*JPILOT NOMINAL DIAMETER
NONE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWYNJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCK*JNOMINAL THICKNESS
A NOMINAL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCKJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWQL*JNOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END
THE NOMINAL DISTANCE BETWEEN THE BODY FACE AND THE PROTRUDING HUB END.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWQL3AETJA2.0*;CWQL3AETJA2.0$JA2.0*;CWQL3AETJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWQR*JNOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END
THE NOMINAL DISTANCE BETWEEN THE BODY FACE AND THE RECESSED HUB END.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWQR3AEVJA2.0*;CWQR3AEVJA2.0$JA2.0*;CWQR3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRB*JBODY RECESS NOMINAL DEPTH
A NOMINAL MEASUREMENT BETWEEN SPECIFIED POINTS ON THE RECESS OF THE BODY,IN DISTINCTION FROM HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRB3EERJA2.0*;CWRB3EERJA2.0$JA2.0*;CWRB3EERJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and CWRX)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWSB)
IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWCN)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and ABSA)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and ABSA)
IF STYLE/REPLY CODE(s) 8 OR 9 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (ADDW)
IF STYLE/REPLY CODE(s) 10A, 10B, 10C OR 10D WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and CWSN and CWSR)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWSN and CWSR)
IF STYLE/REPLY CODE(s) 14 OR 15 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS)
IF STYLE/REPLY CODE(s) 16 WERE ENTERED FOR MRC ANTP, YOU MUST ANSWER MRC (CWRS and CWRX)
ANTP*LBORE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BORE.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(ANTP3HOUL17*;ANTP3HOUL17$L15*;ANTP3HOUL17$$L15*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AD10082 | 1 | PLAIN |
| DR04149 | 10A | W/KEYWAY |
| DR04150 | 10B | W/ 2 KEYWAYS |
| DR04151 | 10C | W/ 3 KEYWAYS |
| DR04152 | 10D | W/ 4 KEYWAYS |
| AD10092 | 11 | TAPERED |
| AD10093 | 12 | TAPERED W/KEYWAY |
| AD10094 | 13 | FLATTED SIDES |
| AD10095 | 14 | W/COUNTERBORE |
| AD10096 | 15 | W/STEPPED COUNTERBORE |
| AD10097 | 16 | PARTIAL W/COUNTERBORE |
| AD10098 | 17 | THREAD SERIES DESIGNATOR FULLY THREADED |
| AD10099 | 18 | THREAD SERIES DESIGNATOR PARTIALLY THREADED |
| AD10083 | 2 | PARTIAL |
| AD10084 | 3 | SQUARE |
| AD10087 | 4 | D |
| AD10086 | 5 | HEX |
| AD10085 | 6 | INVOLUTE SPLINE |
| AD10088 | 7 | STRAIGHT SPLINE |
| AD10089 | 8 | SERRATED |
| AD10090 | 9 | TAPERED SERRATED |
CWRS*JBORE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BORE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRS3AEVJA2.0*;CWRS3AEVJA2.0$JA2.0*;CWRS3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWRX*JBORE NOMINAL DEPTH
A NOMINAL MEASUREMENT BETWEEN SPECIFIED POINTS ON THE BORE,IN DISTINCTION FROM HEIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWRX3AEVJA2.0*;CWRX3AEVJA2.0$JA2.0*;CWRX3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWSB*JBORE NOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A BORE,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSB3AEEJA2.0*;CWSB3AEEJA2.0$JA2.0*;CWSB3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCN*JNOMINAL WIDTH ACROSS FLATS
THE SHORTEST NOMINAL STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCNJA2.0*;CWCNJA2.0$JA2.0*;CWCNJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ABSA*ASPLINE QUANTITY
THE NUMBER OF SPLINES ON OR IN THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(ABSA3AETA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ADDW*ASERRATION QUANTITY
THE NUMBER OF SERRATIONS ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ADDWA10*)
CWSN*JKEYWAY NOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A KEYWAY,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSN3AEVJA2.0*;CWSN3AEVJA2.0$JA2.0*;CWSN3AEVJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWSR*JNOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM
THE NOMINAL DISTANCE FROM THE CENTER OF THE BORE TO THE BOTTOM OF THE KEYWAY(S).
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWSR3AEEJA2.0*;CWSR3AEEJA2.0$JA2.0*;CWSR3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3EERDAAG*;AAJF3EERDAAG$DAAL*;AAJF3EERDAAG$$DAAL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EER | BETWEEN BODY AND FLANGE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
IF STYLE/REPLY CODE(s) 1 OR 5 WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWTX)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWTX)
IF STYLE/REPLY CODE(s) 4A WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWWN)
IF STYLE/REPLY CODE(s) 4B WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWWN)
IF STYLE/REPLY CODE(s) 4C WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWWN)
IF STYLE/REPLY CODE(s) 6A WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWTX)
IF STYLE/REPLY CODE(s) 6B WERE ENTERED FOR MRC CWTR, YOU MUST ANSWER MRC (CWTX)
CWTR*LHUB STYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE HUB.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(CWTR3AEVL1*;CWTR3AEVL1$L4A*;CWTR3AEVL1$$L4A*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AD10100 | 1 | PLAIN |
| AD10101 | 2 | SPLIT |
| AD10102 | 3 | THREADED |
| DR00266 | 4A | 1 STEP |
| DR00267 | 4B | 2 STEPS |
| DR00268 | 4C | 3 STEPS |
| AD10105 | 5 | PINNED |
| DR00269 | 6A | 1 GROOVE |
| DR00270 | 6B | 2 GROOVES |
| AD10106 | 7 | EXTERNALLY SPLINED, STRAIGHT SPLINES |
| AD10107 | 8 | EXTERNALLY SPLINED, INVOLUTE SPLINES |
CWTX*JHUB NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HUB,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWTX3AEEJA2.0*;CWTX3AEEJA2.0$JA2.0*;CWTX3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWWN*JEND NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE END OF THE ITEM,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWWN3AEEJA2.0*;CWWN3AEEJA2.0$JA2.0*;CWWN3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAQLLBODY STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE BODY.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAQLL1)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AD10077 | 1 | PLAIN, SOLID |
| AD10078 | 2 | PLAIN, WITH LIGHTENING HOLES |
| DR03026 | 3A | WEBBED, SOLID |
| DR03027 | 3B | WEBBED, OFFSET, SOLID |
| DR03028 | 4A | WEBBED, WITH LIGHTENING HOLES |
| DR03029 | 4B | WEBBED, OFFSET, WITH LIGHTENING HOLES |
| DR03030 | 5A | SPOKED |
| DR03031 | 5B | SPOKED, OFFSET |
IF STYLE/REPLY CODE(s) LJ WERE ENTERED FOR MRC ABSX, YOU MUST ANSWER MRC (CTQY)
ABSX*DATTACHMENT METHOD
THE MEANS USED TO ATTACH THE ITEM.
Enter the applicable reply code from the table below
(ABSXDCJ*;ABSXDTU$$DAB*)
| Table 1 |
| Reply Code (AB47) | Reply |
| AB | CLAMP |
| TU | CLAMP TAB |
| TV | INTERNAL RING GROOVE |
| LJ | MOUNTING HOLE |
| AD | PRESS FIT |
| BT | SETSCREWS |
| ED | SLIP ON COLLAR |
| CJ | SLOT |
| TX | SNAP RING |
| CC | SOLDERED |
| TP | STAKED |
IF STYLE/REPLY CODE(s) AB, AC OR AW WERE ENTERED FOR MRC CTQY, YOU MUST ANSWER MRC (CWZK)
CTQY*JMOUNTING HOLE TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF MOUNTING HOLES PROVIDED ON THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(CTQY3EEJJAB2*;CTQY3EEJJAB2$$JAB3*;CTQY3EEJJAB2$JAB2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EEJ | TRANSVERSELY THROUGH FACE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH37) | Reply |
| AB | COUNTERBORED |
| AC | COUNTERSUNK |
| AW | PLAIN |
| BE | TAPERED |
| AX | THREADED |
CWZK*JMOUNTING HOLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWZKJA2.0*;CWZKJA2.0$JA2.0*;CWZKJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJAFJ2*;TMQYJAFJ2$$JAFJ3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| BKY | BEARING |
| ABR | BOLT |
| BGU | BORE INSERT |
| AJM | BUSHING |
| BBX | CAP SCREW |
| AMN | CLAMP |
| ATF | COLLAR |
| AKR | DOWEL PIN |
| BGV | EXTERNALLY LUBRICATED BEARING |
| BGW | FRICTION DISC |
| ACN | GASKET |
| AHK | KEY |
| BGX | LOCK PIN |
| ACB | LOCK WASHER |
| ADW | LOCKNUT |
| BGY | LUBRICANT IMPREGNATED BEARING |
| ABW | NUT |
| AEA | PLUG |
| BGZ | POST |
| AFF | RETAINING RING |
| ATC | RIVET |
| AFJ | SETSCREW |
| BHA | SHOULDER PIN |
| ATD | SPACER |
| AMY | SPRING |
| AFW | SPRING PIN |
| BHB | STOP PIN |
| AFN | STUD |
| AFY | TAPERED PIN |
| AJW | WASHER |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCPH*;CBBLDCPC$$DCDT*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CPC | ALIGNMENT HOLE |
| AEQ | CASEHARDENED |
| CPK | CHAMFERED TEETH |
| AQG | FILLED MARKINGS |
| CPD | GROOVE |
| CPE | INTEGRAL KEY |
| CPF | INTEGRAL TAPERED KEY |
| CPG | KNURLED KNOB |
| CDT | LUBRICATION GROOVE |
| CDW | LUBRICATION HOLE |
| CPH | RETAINING RING GROOVE |
| BRP | SPECIAL MARKING |
| CPJ | TAPERED KEYWAY |
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG4)
| Table 1 |
| Reply Code (EN02) | Reply |
| G4 | COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAH3)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information