A liquid distillate obtained from crude petroleum, shale oil or tar sands by refining and is intended for marine applications.

FSC Information

9140

Fuel Oils

Colloquial Information

No Colloquials assigned to this Approve Item Name at this time

Change List

MRC PDNB has been added

MRC ZZZP has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED50110*)

CLWHDFUEL GRADE CLASSIFICATION

A CLASSIFICATION INDICATING THE RATED GRADE OF THE FUEL.

Enter the applicable reply code from the table below

(CLWHDEJ)

Table 1
	Reply Code (AF80)	Reply
	ES	75/50 FFO
	CZ	AVGAS 100/130
	CY	AVGAS 100/130 LOW LEAD
	CX	AVGAS 80/87
	BD	AVIATION FUEL
	DB	AVTAG
	DC	AVTUR
	FJ	B2 BIODIESEL
	FH	B20 BIODIESEL
	FK	B5 BIODIESEL
	BU	CRUDE OIL, SOUR
	BV	CRUDE OIL, SWEET
	FM	DIESEL, HIGH SULFUR
	FN	DIESEL, HIGH SULFUR, ARCTIC
	FP	DIESEL, HIGH SULFUR, LOW TEMP
	FQ	DIESEL, LOW SULFUR
	FR	DIESEL, LOW SULFUR, ARCTIC
	FS	DIESEL, LOW SULFUR, LOW TEMP
	FT	DIESEL, MARINE
	FU	DIESEL, OVERSEAS PROCUREMENT
	FV	DIESEL, ULTRA-LOW SULFUR
	FW	DIESEL, ULTRA-LOW SULFUR, LOW TEMP
	FA	DISTILLATE FUEL
	FL	E85 FUEL ETHANOL
	DL	FUEL OIL NO. 1
	DM	FUEL OIL NO. 2
	DN	FUEL OIL NO. 4
	DP	FUEL OIL NO. 5 HEAVY
	DQ	FUEL OIL NO. 5 LIGHT
	DR	FUEL OIL NO. 6
	GA	GASOHOL, UNLEADED, MIDGRADE
	GB	GASOHOL, UNLEADED, PREMIUM
	GC	GASOHOL, UNLEADED, REGULAR
	GD	GASOLINE, LEADED, PREMIUM
	GE	GASOLINE, LEADED, REGULAR
	FX	GASOLINE, REFORMULATED, MIDGRADE
	FY	GASOLINE, REFORMULATED, PREMIUM
	FZ	GASOLINE, REFORMULATED, REGULAR
	GH	GASOLINE, UNLEADED, MIDGRADE
	GF	GASOLINE, UNLEADED, PREMIUM
	GG	GASOLINE, UNLEADED, REGULAR
	DV	IFO
	CN	JET A
	DS	JET A-1
	EU	JET A-50
	DX	JP-4
	DY	JP-5
	CP	JP-7
	DZ	JP-8
	DT	JP-TS
	EA	KERO/B
	FB	KEROSENE 1K
	FC	KEROSENE 2K
	EV	MGO
	EH	REFEREE FOR JP-4
	EJ	REFEREE FOR JP-5
	CF	RJ-1
	EM	SPECIAL GRADE MOGAS LOW LEAD

CSGW*ANATO CODE NUMBER

THE DESIGNATOR WHICH IS ASSIGNED TO THE PRODUCT BY THE NATO MILITARY AGENCY FOR STANDARDIZATION(MAS).

Enter the alpha-numeric reply with a minimum of one character.

(CSGWAJ3)

CQLQJVISCOSITY AT RATED TEMP

THE KINEMATIC UNITS (CENTISTOKES/MM 2/S) OF THE ITEM AT A RATED TEMPERATURE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CQLQJAAK2.0*;CQLQJAAK2.0$JAAK2.0*;CQLQJAAK2.0$$JAAK2.1*)

Table 1
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

Table 2
	Reply Code (AP15)	Reply
	AF	0 DEG FAHRENHEIT
	AG	10 DEG FAHRENHEIT
	AM	100 DEG FAHRENHEIT
	AN	120 DEG FAHRENHEIT
	BK	122 DEG FAHRENHEIT
	AP	130 DEG FAHRENHEIT
	AW	140 DEG FAHRENHEIT
	BC	20 DEG CELSIUS
	BD	-20 DEG CELSIUS
	AH	20 DEG FAHRENHEIT
	AQ	200 DEG FAHRENHEIT
	AR	210 DEG FAHRENHEIT
	BE	-30 DEG CELSIUS
	AJ	30 DEG FAHRENHEIT
	BH	-30 DEG FAHRENHEIT
	BF	-34.4 DEG CELSIUS
	BL	40 DEG CELSIUS
	AS	400 DEG FAHRENHEIT
	BG	50 DEG CELSIUS
	AK	70 DEG FAHRENHEIT
	AL	77 DEG FAHRENHEIT
	BJ	85 DEG FAHRENHEIT

CTJCJMINIMUM FLASH POINT AND TEST METHOD

A NUMERIC VALUE OF THE MINIMUM TEMPERATURE AT WHICH THE VAPOR WILL IGNITE,AND THE TEST METHOD.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CTJCJCAAQ2.0*;CTJCJCAAQ2.0$JCAAQ2.1*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

Table 2
	Reply Code (AL43)	Reply
	AAP	ABEL CLOSED CUP
	AAR	ABEL OPEN CUP
	AAK	CLEVELAND OPEN CUP
	AAB	PENSKY-MARTENS CLOSED CUP
	AAQ	PENSKY-MARTENS OPEN CUP
	AAS	SETAFLASH CLOSED TESTER
	AAL	TAG CLOSED CUP

CRBY*JMAXIMUM POUR POINT

THE LOWEST TEMPERATURE AT WHICH THE ITEM IS OBSERVED TO FLOW.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CRBYJC2.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

CSWR*JDENSITY VALUE

THE QUOTIENT OF THE PRODUCT MASS BY ITS VOLUME AT A SPECIFIED TEMPERATURE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CSWRJHPC2.0*;CSWRJHPC2.0$$JHPC2.1*)

Table 1
	Reply Code (AB49)	Reply
	HP	GRAMS PER MILLILITER
	HR	KILOGRAMS PER CUBIC METER
	DF	KILOGRAMS PER LITER

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CTYG*JDENSITY TEMP

THE TEMPERATURE AT WHICH THE DENSITY IS DETERMINED.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CTYGJF2.0*)

Table 1
	Reply Code (AB36)	Reply
	C	CELSIUS
	F	FAHRENHEIT

CTCF*JMINIMUM HEAT OF COMBUSTION VALUE

THE NUMBER OF THERMAL UNITS WHICH IS RELEASED BY COMBUSTION OF THE MASS UNIT OF THE FUEL (FORMED,UNCONDENSED WATER) IN OXYGEN.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CTCFJDL2.0*;CTCFJDL2.0$JDL2.1*)

Table 1
	Reply Code (AG20)	Reply
	CY	BRITISH THERMAL UNITS PER POUND
	CZ	CALORIES PER GRAM
	DL	JOULES PER KILOGRAM
	DM	MEGAJOULES PER KILOGRAM

CSTK*ACOPPER CORROSION CLASSIFICATION NUMBER

AN INDICATION OF THE ASTM COPPER CORROSION CLASSIFICATION IN ACCORDANCE WITH IP 154,ASTM D130 AT 100 DEG CELSIUS.

Enter the alpha-numeric reply with a minimum of one character.

(CSTKAA1)

CLFT*BMAXIMUM SULPHUR CONTENT PERCENTAGE BY WEIGHT

THE PERCENTAGE BY WEIGHT OF THE MAXIMUM SULPHUR CONTENT OF THE ITEM.

Enter a reply with a minimum of one digit on either side of the decimal point.

(CLFTB2.0)

CGDF*BMAXIMUM ASH CONTENT PERCENTAGE BY WEIGHT

THE MAXIMUM ASH CONTENT OF THE ITEM,EXPRESSED IN PERCENT BY WEIGHT.

Enter a reply with a minimum of one digit on either side of the decimal point.

(CGDFB2.0)

CRXY*JMAXIMUM CARBON RESIDUE CONTENT PERCENTAGE BY WEIGHT AND TEST METHOD

A MEASUREMENT OF THE MAXIMUM CARBON RESIDUE CONTENT,EXPRESSED IN PERCENT BY WEIGHT,AND THE TEST METHOD.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CRXYJEQF2.0*)

Table 1
	Reply Code (AJ50)	Reply
	EQF	CONRADSON
	EQG	RAMSBOTTOM

CRWW*BMAXIMUM AROMATICS PERCENTAGE BY VOLUME

A MEASUREMENT OF THE MAXIMUM AROMATICS OCCURING IN THE ITEM,EXPRESSED IN PERCENT BY VOLUME.

Enter a reply with a minimum of one digit on either side of the decimal point.

(CRWWB2.0)

CTBQ*BMAXIMUM OLEFINS CONTENT PERCENTAGE BY VOLUME

A MEASUREMENT OF THE MAXIMUM OLEFINS CONTENT OF THE ITEM,EXPRESSED IN PERCENT BY VOLUME.

Enter a reply with a minimum of one digit on either side of the decimal point.

(CTBQB2.0)

CRWZ*ADISTILLATION POINT PERCENTAGE AT MAXIMUM TEMP

AN INDICATION OF THE MAXIMUM TEMPERATURE AT WHICH A CERTAIN DISTILLATION POINT IS REACHED,EXPRESSED IN PERCENT.

Enter the alpha-numeric reply with a minimum of one character.

(CRWZAJ6)

CSLJ*BMAXIMUM DISTILLATION RESIDUE VOLUME PERCENTAGE

AN INDICATION OF THE MAXIMUM AMOUNT OF MATTER REMAINING AFTER DISTILLATION,EXPRESSED IN PERCENT.

Enter a reply with a minimum of one digit on either side of the decimal point.

(CSLJB2.0)

CTDH*BMAXIMUM DISTILLATION LOSS VOLUME PERCENTAGE

AN INDICATION OF THE MAXIMUM AMOUNT LOST BY DISTILLATION,EXPRESSED IN PERCENT.

Enter a reply with a minimum of one digit on either side of the decimal point.

(CTDHB2.0)

CTDZ*JEVAPORATION PERCENTAGE AT MAXIMUM TEMP

AN INDICATION OF THE MAXIMUM TEMPERATURE AT WHICH A SPECIFIED EVAPORATION OF THE ITEM OCCURS,EXPRESSED IN PERCENT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CTDZJJGAAE2.0*)

Table 1
	Reply Code (AD21)	Reply
	KF	10 PERCENT
	HP	20 PERCENT
	JB	50 PERCENT
	JG	90 PERCENT

Table 2
	Reply Code (AJ40)	Reply
	AAD	DEG CELSIUS
	AAE	DEG FAHRENHEIT

CRZQ*GMANDATORY ADDITIVE

THE MANDATORY ADDITIVE(S) USED TO IMPART A DESIRED CHARACTERISTIC.

Enter clear text.

(CRZQGCLEARTEXT)

CWAY*DSUPPLY CLASSIFICATION

A CLASSIFICATION USED TO IDENTIFY THE SUPPLY FORM BY WHICH THE ITEM IS DELIVERED.

Enter the applicable reply code from the table below

(CWAYDAB)

Table 1
	Reply Code (AM69)	Reply
	AB	BULK
	AD	PACKAGED

AKKF*JQUANTITY WITHIN EACH UNIT PACKAGE

THE NUMBER OF THE VOLUME,FORM,OR THE DOSAGE WITHIN EACH UNIT PACKAGE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKKFJFK2.0*)

Table 1
	Reply Code (AG67)	Reply
	FK	GALLON, IMPERIAL MEASURE
	AF	GALLONS
	CC	LITERS

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	CS	CONSTRUCTION
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	FN	FINISH
	FM	FORM
	FA	FORMULA
	GR	GRADE
	GP	GROUP
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LT	LIMIT
	MK	MARK
	AA	MARKER
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	NR	NUMBER
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	QA	QUALITY
	RN	RANGE
	RT	RATING
	RF	REFERENCE NUMBER
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

CSPB*BMAXIMUM ASPHALTENE CONTENT PERCENTAGE BY WEIGHT

A MEASUREMENT OF THE MAXIMUM ASPHALTENE CONTENT OF THE ITEM,EXPRESSED IN PERCENT BY WEIGHT.

Enter a reply with a minimum of one digit on either side of the decimal point.

(CSPBB2.0)

CWJC*BMAXIMUM WATER CONTENT PERCENTAGE BY VOLUME

A MEASUREMENT OF THE MAXIMUM WATER CONTENT OF THE ITEM,EXPRESSED IN PERCENT BY VOLUME.

Enter a reply with a minimum of one digit on either side of the decimal point.

(CWJCB2.0)

CLGK*AMILITARY SYMBOL

THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MILITARY NUMBER.

Enter the alpha-numeric reply with a minimum of one character.

(CLGKAG0)

CWKN*GPERMISSIBLE ADDITIVE

THOSE PERMISSIBLE ADDITIVES USED TO IMPART A DESIRED CHARACTERISTIC.

Enter clear text.

(CWKNGCLEARTEXT)

SUPP*GSUPPLEMENTARY FEATURES

CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.

Enter the reply in clear text.Separate multiple replies with a semicolon.

(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)

This MRC replaced MRC ZZZP

The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.

PDNB*APURCHASE DESCRIPTION IDENTIFICATION

THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.

Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.

(ZZZPJ81A37-30624A*)

HZRD*DHAZARDOUS SUBSTANCES

THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.

Enter the applicable reply code from the table below

(HZRDDHAZ024*;HZRDDHAZ022$$DHAZ021*)

Table 1
	Reply Code (HZ00)	Reply
	HAZ353	AVIATION FUEL
	HAZ354	DISTILLATE FUEL
	HAZ021	FUEL OIL NO. 1
	HAZ022	FUEL OIL NO. 2
	HAZ023	FUEL OIL NO. 4
	HAZ024	FUEL OIL NO. 5 HEAVY
	HAZ025	FUEL OIL NO. 5 LIGHT
	HAZ026	FUEL OIL NO. 6

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)