A specially designed regulator with either a standard Compressed Gas Association (CGA) gas inlet/outlet connection or pipe connections. It provides for the controlled withdrawal of compressed gas from a compressed gas cylinder either by direct attachment to the cylinder or by insertion into a piping distribution system that is pressured by a cylinder.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED49444*)
BMMHDSTAGE TYPE
INDICATES THE TYPE OF STAGE PROVIDED.
Enter the applicable reply code from the table below
(BMMHDANL)
| Table 1 |
| Reply Code (AK54) | Reply |
| ANL | DOUBLE |
| ACN | SINGLE |
IF STYLE/REPLY CODE(s) AFY WERE ENTERED FOR MRC CYPF, YOU MUST ANSWER MRC (AWYE)
IF STYLE/REPLY CODE(s) AFZ WERE ENTERED FOR MRC CYPF, YOU MUST ANSWER MRC (CYPG)
CYPFDDELIVERY PRESSURE TYPE
INDICATES THE TYPE OF DELIVERY PRESSURE.
Enter the applicable reply code from the table below
(CYPFDAFY)
| Table 1 |
| Reply Code (AC58) | Reply |
| AFY | ADJUSTABLE |
| AFZ | PRESET |
AWYE*JMAXIMUM DELIVERY PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM WILL DELIVER.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWYEJCS2.0*)
| Table 1 |
| Reply Code (AG20) | Reply |
| DA | BAR |
| AV | KILOGRAMS PER SQUARE CENTIMETER |
| CS | KILOPASCALS |
| BB | POUNDS PER SQUARE INCH |
CYPG*JPRESET DELIVERY PRESSURE
THE PREDETERMINED SETTING AT WHICH AN ITEM IS DESIGNED TO OPERATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYPGJCS2.0*)
| Table 1 |
| Reply Code (AG20) | Reply |
| DA | BAR |
| AV | KILOGRAMS PER SQUARE CENTIMETER |
| CS | KILOPASCALS |
| BB | POUNDS PER SQUARE INCH |
IF STYLE/REPLY CODE(s) AAK OR AAL WERE ENTERED FOR MRC BPGT, YOU MUST ANSWER MRC (CYPH and CCGG)
IF STYLE/REPLY CODE(s) AAJ WERE ENTERED FOR MRC BPGT, YOU MUST ANSWER MRC (CYPJ)
BPGTDINLET FITTING CONNECTION TYPE
INDICATES THE TYPE OF INLET FITTING CONNECTION PROVIDED.
Enter the applicable reply code from the table below
(BPGTDAAJ)
| Table 1 |
| Reply Code (AB76) | Reply |
| AAJ | COMPRESSED GAS ASSOCIATION |
| AAK | THREADED EXTERNAL PIPE |
| AAL | THREADED INTERNAL PIPE |
CYPH*JINLET FITTING NOMINAL THREAD SIZE
A NOMINAL DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE INLET FITTING THREAD SIZE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYPHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CCGG*DINLET FITTING THREAD DIRECTION
THE DIRECTION OF THE INLET FITTING THREAD WHEN VIEWED AXIALLY.
Enter the applicable reply code from the table below
(CCGGDAAL)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
CYPJ*AINLET FITTING CONNECTION CGA NUMBER
A DESIGNATION NUMBER ASSIGNED TO THE INLET FITTING CONNECTION, IN ACCORDANCE WITH THE COMPRESSED GAS ASSOCIATION.
Enter the numeric reply with a minimum of one digit.
(CYPJA10*)
IF STYLE/REPLY CODE(s) AAK OR AAL WERE ENTERED FOR MRC CYPK, YOU MUST ANSWER MRC (CYPL and CDNR)
IF STYLE/REPLY CODE(s) AAJ WERE ENTERED FOR MRC CYPK, YOU MUST ANSWER MRC (CYPM)
CYPKDOUTLET FITTING CONNECTION TYPE
INDICATES THE TYPE OF OUTLET FITTING CONNECTION PROVIDED.
Enter the applicable reply code from the table below
(CYPKDAAL)
| Table 1 |
| Reply Code (AB76) | Reply |
| AAJ | COMPRESSED GAS ASSOCIATION |
| AAK | THREADED EXTERNAL PIPE |
| AAL | THREADED INTERNAL PIPE |
CYPL*JOUTLET FITTING NOMINAL THREAD SIZE
A NOMINAL DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE OUTLET FITTING THREAD SIZE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYPLJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CDNR*DOUTLET FITTING THREAD DIRECTION
THE DIRECTION OF THE OUTLET FITTING THREAD WHEN VIEWED AXIALLY.
Enter the applicable reply code from the table below
(CDNRDAAL)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
CYPM*AOUTLET FITTING CONNECTION CGA NUMBER
A DESIGNATION NUMBER ASSIGNED TO THE OUTLET FITTING CONNECTION, IN ACCORDANCE WITH THE COMPRESSED GAS ASSOCIATION.
Enter the numeric reply with a minimum of one digit.
(CYPMA10*)
CYPNDINLET INDICATOR TYPE
INDICATES THE TYPE OF INLET INDICATOR PROVIDED WITH THE ITEM.
Enter the applicable reply code from the table below
(CYPNDABJ)
| Table 1 |
| Reply Code (AJ89) | Reply |
| ABH | DIAL PRESSURE GAGE |
| ABJ | GAGELESS |
CYPPDOUTLET INDICATOR TYPE
INDICATES THE TYPE OF OUTLET INDICATOR PROVIDED WITH THE ITEM.
Enter the applicable reply code from the table below
(CYPPDABM)
| Table 1 |
| Reply Code (AJ89) | Reply |
| ABK | DIAL FLOW GAGE |
| ABH | DIAL PRESSURE GAGE |
| ABL | FLOWMETER |
| ABJ | GAGELESS |
| ABM | POP UP |
IF STYLE/REPLY CODE(s) CAS WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (BBJX)
IF STYLE/REPLY CODE(s) AED WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AEXZ)
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDAED)
| Table 1 |
| Reply Code (AM39) | Reply |
| CAS | CYLINDER |
| BYQ | INLINE |
| AED | PANEL |
| ATS | WALL |
BBJX*DMOUNTING POSITION
THE INSTALLED POSITION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BBJXDABE*;BBJXDAAC$DAAB*)
| Table 1 |
| Reply Code (AM84) | Reply |
| ABE | BACK |
| AAB | LEFT SIDE |
| AAC | RIGHT SIDE |
AEXZ*JPANEL ACCOMMODATION HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATION FOR THE PANEL OPENING FOR WHICH THE ITEM IS DESIGNED,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEXZJAA2.0*;AEXZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDERA)
| Table 1 |
| Reply Code (AN47) | Reply |
| EQW | BURST DISK |
| EQX | ELECTRIC HEATER |
| EQY | HEATSINK FINS |
| AKM | RELIEF VALVE |
| EQZ | W/O INLET FITTING |
| ERA | W/O OUTLET FITTING |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information