A vehicle designed to support and propel a person inside an aircraft carrier catapult chamber. It may be pulled through the chamber in either direction by cable or rope and may be equipped with inspection instruments.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED47261*)
CSMXJMAXIMUM WEIGHT CAPACITY
THE MAXIMUM WEIGHT THE ITEM IS DESIGNED TO SUPPORT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSMXJLB2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
APGFDDESIGN TYPE
INDICATES THE DESIGN TYPE OF THE ITEM.
Enter the applicable reply code from the table below
(APGFDDTT*;APGFDFTX$DDTR*;APGFDFTX$$DDTR*)
| Table 1 |
| Reply Code (AK54) | Reply |
| DTR | BARREL |
| DYX | CAN |
| EAY | CARGO CONTAINER HANDLING |
| EZN | CYLINDER |
| EAX | DRUM HANDLING |
| DTT | GENERAL UTILITY |
| FTX | HEATED |
| FDZ | HIGHLIFT |
| FCX | LINEN CABINET |
| FCY | MEDICAL CABINET |
| BTJ | PLATFORM |
| AZP | RACK |
| FTY | REFRIGERATED |
| EHP | STAKE |
| DTW | STEVEDORE |
| EZR | TANK |
CCRJ*DSHELF TYPE
INDICATES THE TYPE OF SHELF(VES) PROVIDED.
Enter the applicable reply code from the table below
(CCRJDBYG*;CCRJDDYQ$DBPX*;CCRJDDYQ$$DBPX*)
| Table 1 |
| Reply Code (AK54) | Reply |
| BJX | BAR |
| DSW | DOUBLE FACE |
| AEJ | FLAT |
| BYG | KNOCKDOWN |
| DYQ | PAN SLIDE RECESS |
| AZP | RACK |
| DYW | TRAY |
| BPX | V |
CWFRJNOMINAL OVERALL LENGTH
THE NOMINAL DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWFRJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CXRQJNOMINAL OVERALL WIDTH
THE NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXRQJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CYAGJNOMINAL OVERALL HEIGHT
THE NOMINAL DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYAGJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CYAH*JNOMINAL PLATFORM HEIGHT ABOVE FLOOR
A NOMINAL MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE PLATFORM ABOVE THE FLOOR,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYAHJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CYAK*JNOMINAL PLATFORM LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF THE PLATFORM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYAKJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CYAL*JNOMINAL PLATFORM WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE PLATFORM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYALJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CYAM*JNOMINAL SHELF LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF THE SHELF,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYAMJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CYAN*JNOMINAL SHELF WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE SHELF,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYANJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CYAP*JNOMINAL STAKE HEIGHT
A NOMINAL MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE STAKE,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYAPJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
CYAQJNOMINAL ROLLING ELEMENT DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A ROLLING ELEMENT,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CYAQJF2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
AGBP*JMAXIMUM LIFT HEIGHT
THE MAXIMUM HEIGHT THE ITEM IS CAPABLE OF RAISING AN OBJECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGBPJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| C | CENTIMETERS |
| F | FEET |
| A | INCHES |
| L | MILLIMETERS |
ALREDTIRE TYPE
INDICATES THE TYPE OF TIRE(S) PROVIDED.
Enter the applicable reply code from the table below
(ALREDAL*;ALREDAC$DBH*;ALREDAC$$DBH*)
| Table 1 |
| Reply Code (AH67) | Reply |
| BF | ALUMINUM |
| BG | BRASS |
| BH | CAST IRON |
| BJ | COMPOSITION |
| AL | METAL |
| AM | PLASTIC |
| AD | PNEUMATIC |
| AP | RUBBER |
| AK | SEMIPNEUMATIC |
| AS | SEMIPNEUMATIC RUBBER |
| BL | SEMISOFT RUBBER |
| BM | SOFT RUBBER TREAD, HARD RUBBER CORE |
| BN | SOFT TREAD DEMOUNTABLE RUBBER |
| BP | SOLID NEOPRENE |
| AB | SOLID RUBBER |
| AC | STEEL |
| BQ | SYNTHETIC RUBBER |
CYMB*JROLLING ELEMENT TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF ROLLING ELEMENTS FOR MOVING THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CYMBJAFQ2*;CYMBJAFQ2$$JAFQ3*;CYMBJAFQ2$JAFQ2*)
| Table 1 |
| Reply Code (AA78) | Reply |
| AFP | RIGID CASTER |
| AFQ | ROLLER |
| AFR | SWIVEL CASTER |
| AAP | WHEEL |
CCRSGROLLING ELEMENT LOCATION
INDICATES THE LOCATION OF THE ROLLING ELEMENT(S).
Enter clear text.
(CCRSGCLEARTEXT)
AGDSDSTEERING TYPE
INDICATES THE TYPE OF STEERING MECHANISM PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(AGDSDN*;AGDSDJ$DL*)
| Table 1 |
| Reply Code (AE83) | Reply |
| H | 2-WHEEL |
| L | CASTER |
| N | FIFTH WHEEL |
| G | NONSTEERING TYPE |
| J | OBLIQUE |
CYASDHANDLE MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE HANDLE IS FABRICATED.
Enter the applicable reply code from the table below
(CYASDCUB000*;CYASDASA000$DFEC000*;CYASDASA000$$DFEC000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| ASA000 | ASBESTOS |
| FBZ000 | CANVAS |
| CUB000 | COPPER ALLOY |
| FEC000 | IRON MALLEABLE |
| MGA000 | MAGNESIUM |
| MTC000 | METAL |
| PCA000 | PLASTIC |
| PCX000 | PLASTIC POLYETHYLENE |
| WDB000 | PLYWOOD |
| RCE000 | RUBBER |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
CYARDFRAME MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE FRAME IS FABRICATED.
Enter the applicable reply code from the table below
(CYARDMGA000*;CYARDWDC000$DPCX000*;CYARDWDC000$$DPCX000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| ASA000 | ASBESTOS |
| FBZ000 | CANVAS |
| CUB000 | COPPER ALLOY |
| FEC000 | IRON MALLEABLE |
| MGA000 | MAGNESIUM |
| MTC000 | METAL |
| PCA000 | PLASTIC |
| PCX000 | PLASTIC POLYETHYLENE |
| WDB000 | PLYWOOD |
| RCE000 | RUBBER |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
CYAT*DSHELF MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE SHELF IS FABRICATED.
Enter the applicable reply code from the table below
(CYATDMGA000*;CYATDSTB000$DALA000*;CYATDSTB000$$DALA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| ASA000 | ASBESTOS |
| FBZ000 | CANVAS |
| CUB000 | COPPER ALLOY |
| FEC000 | IRON MALLEABLE |
| MGA000 | MAGNESIUM |
| MTC000 | METAL |
| PCA000 | PLASTIC |
| PCX000 | PLASTIC POLYETHYLENE |
| WDB000 | PLYWOOD |
| RCE000 | RUBBER |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
CYAJ*DBOX MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE BOX IS FABRICATED.
Enter the applicable reply code from the table below
(CYAJDMTC000*;CYAJDFBZ000$DALA000*;CYAJDFBZ000$$DALA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| ASA000 | ASBESTOS |
| FBZ000 | CANVAS |
| CUB000 | COPPER ALLOY |
| FEC000 | IRON MALLEABLE |
| MGA000 | MAGNESIUM |
| MTC000 | METAL |
| PCA000 | PLASTIC |
| PCX000 | PLASTIC POLYETHYLENE |
| WDB000 | PLYWOOD |
| RCE000 | RUBBER |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| WDC000 | WOOD |
ATWSDBRAKING METHOD
THE MEANS BY WHICH THE BRAKING ACTION IS APPLIED.
Enter the applicable reply code from the table below
(ATWSDAAS*;ATWSDAAR$DAAT*)
| Table 1 |
| Reply Code (AK88) | Reply |
| AAR | FOOT |
| AAS | HAND LEVER |
| AAT | HAND PRESSURE |
AQYJ*AHANDLE QUANTITY
THE NUMBER OF HANDLES PROVIDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AQYJA10*)
BGZL*ASHELF QUANTITY
THE NUMBER OF SHELVES FURNISHED WITH THE ITEM.
Enter the numeric reply with a minimum of one digit.
(BGZLA10*)
CCRY*ACOUPLING QUANTITY
THE NUMBER OF COUPLINGS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(CCRYA10*)
AFPV*ACOMPARTMENT QUANTITY
THE NUMBER OF COMPARTMENTS FORMED BY PARTITIONS.
Enter the numeric reply with a minimum of one digit.
(AFPVA10*)
CCRZ*ASTAKE QUANTITY
THE NUMBER OF STAKES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(CCRZA10*)
AHVV*DNOSE FEATURE TYPE
INDICATES THE PARTICULAR TYPE OF NOSE FEATURE CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(AHVVDE*;AHVVDF$DD*)
| Table 1 |
| Reply Code (AF52) | Reply |
| E | DOUBLE PRONG |
| F | FLAT |
| D | SOLID |
AXEP*DCOUPLER TYPE
INDICATES THE TYPE OF COUPLER PROVIDED.
Enter the applicable reply code from the table below
(AXEPDAT*;AXEPDAS$DAS*)
| Table 1 |
| Reply Code (AH98) | Reply |
| AS | AUTOMATIC |
| AT | MANUAL |
BBMR*DHANDLE SHAPE
THE PHYSICAL CONFIGURATION OF THE HANDLE.
Enter the applicable reply code from the table below
(BBMRDAYC*;BBMRDACY$DAND*)
| Table 1 |
| Reply Code (AD07) | Reply |
| ACY | CURVED |
| BBX | CURVED-U- |
| BDF | D-SHAPE |
| AND | RECTANGULAR |
| ATG | STRAIGHT |
| BBK | T |
| AYC | U |
CCRK*GSHELF SPACING
THE SPACING BETWEEN SHELVES.
Enter clear text.
(CCRKGCLEARTEXT)
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDDFX*;CBBLDDFW$$DDFR*)
| Table 1 |
| Reply Code (AN47) | Reply |
| DFR | ADJUSTABLE SHELF |
| DFS | BARREL SUPPORT FOLDING WING |
| BLW | DRAIN COCK |
| DFT | DUMP BOX |
| DEY | PAD |
| DFU | REMOVABLE SHELF |
| DFV | RUBBER BUMPER |
| DFW | SHELF DIVIDER |
| DFX | SOLID BACK FRAME |
| DFY | TAPERED FRAME |
| DFZ | TILTING |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information