An item which comprises a portion of a valve, and when used in conjunction with an inlet and outlet section forms a complete valve.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED46679*)
BWGPASECTION QUANTITY
THE NUMBER OF SECTIONS INCLUDED.
Enter the numeric reply with a minimum of one digit.
(BWGPA10*)
CYGY*AFLOW PATTERN QUANTITY
THE NUMBER OF FL0W PATTERNS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(CYGYA10*)
CYGZ*ASPOOL POSITION QUANTITY
THE NUMBER OF SPOOL POSITIONS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(CYGZA10*)
ADSY*JVALVE DISCHARGE FLOW RATE
THE RATED VALVE DISCHARGE CAPACITY PER UNIT OF TIME.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADSYJM2.0*)
| Table 1 |
| Reply Code (AC64) | Reply |
| A | CUBIC FEET PER MINUTE |
| C | CUBIC METERS PER MINUTE |
| M | GALLONS PER MINUTE |
| Y | IMPERIAL GALLONS PER MINUTE |
| W | KILOGRAMS PER HOUR |
| E | LITERS PER MINUTE |
| Z | LITERS PER SECOND |
| V | POUNDS PER HOUR |
CQRGDBODY MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE BODY IS FABRICATED.
Enter the applicable reply code from the table below
(CQRGDFE0047*;CQRGDAL2014$DALE000*;CQRGDAL2014$$DALE000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6151 | ALUMINUM ALLOY 6151 |
| AL6262 | ALUMINUM ALLOY 6262 |
| AL7075 | ALUMINUM ALLOY 7075 |
| ALE000 | ALUMINUM OXIDE |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FEB000 | IRON CAST |
| FE0047 | IRON CAST UNS F12801 |
| STA000 | STEEL |
| ST0303 | STEEL COMP 303 |
| ST0079 | STEEL COMP 303SE |
| ST0304 | STEEL COMP 304 |
| ST0316 | STEEL COMP 316 |
| ST0416 | STEEL COMP 416 |
| ST0101 | STEEL COMP 430F |
| STB000 | STEEL CORROSION RESISTING |
| ST1836 | STEEL UNS J92200 |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
CQCJ*JMAXIMUM OPERATING PRESSURE AND MEDIA FOR WHICH DESIGNED
THE MAXIMUM PRESSURE AT WHICH AN ITEM IS RATED TO OPERATE FOR EACH TYPE OF SERVICE WITH WHICH AN ITEM MAY BE USED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQCJJLABR2.0*;CQCJJLABR2.0$$JLABR2.1*)
| Table 1 |
| Reply Code (AN71) | Reply |
| B | BAR |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
| Table 2 |
| Reply Code (AN91) | Reply |
| AAE | AIR |
| AAL | BUTANE |
| AAM | CARBON DIOXIDE |
| ACA | CHLORINE |
| AAY | FUEL/OIL, HYDROCARBON |
| AAQ | GAS |
| ABA | GAS, INERT |
| ABD | GAS, NATURAL |
| AGT | HYDRAULIC FLUID, MINERAL BASE |
| ACD | HYDRAULIC FLUID, PETROLEUM BASE |
| AAW | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| AAX | HYDRAULIC FLUID, SILICATE-ESTER BASE |
| ABF | NITROGEN, LIQUID |
| ACJ | OIL |
| ACB | OIL, CHLORINATED TRANSFORMER |
| ACE | OIL, HYDRAULIC |
| ABC | OIL, LUBRICATING, DIESTER BASE |
| ABJ | OXYGEN, GASEOUS |
| ABK | OXYGEN, LIQUID |
| ACK | PROPANE |
| ABM | REFRIGERANT 12 |
| ABP | STEAM |
| ABR | WATER |
| ABS | WATER, FRESH |
CRWH*JMAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED
A RATING WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,FOR EACH TYPE OF SERVICE WITH WHICH AN ITEM MAY BE USED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRWHJFABR2.0*;CRWHJFABR2.0$$JFABR2.1*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
| Table 2 |
| Reply Code (AN91) | Reply |
| AAE | AIR |
| AAL | BUTANE |
| AAM | CARBON DIOXIDE |
| ACA | CHLORINE |
| AAY | FUEL/OIL, HYDROCARBON |
| AAQ | GAS |
| ABA | GAS, INERT |
| ABD | GAS, NATURAL |
| AGT | HYDRAULIC FLUID, MINERAL BASE |
| ACD | HYDRAULIC FLUID, PETROLEUM BASE |
| AAW | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| AAX | HYDRAULIC FLUID, SILICATE-ESTER BASE |
| ABF | NITROGEN, LIQUID |
| ACJ | OIL |
| ACB | OIL, CHLORINATED TRANSFORMER |
| ACE | OIL, HYDRAULIC |
| ABC | OIL, LUBRICATING, DIESTER BASE |
| ABJ | OXYGEN, GASEOUS |
| ABK | OXYGEN, LIQUID |
| ACK | PROPANE |
| ABM | REFRIGERANT 12 |
| ABP | STEAM |
| ABR | WATER |
| ABS | WATER, FRESH |
| ABT | WATER, SALT |
IF STYLE/REPLY CODE(s) AAD OR AAG WERE ENTERED FOR MRC AQLR, YOU MUST ANSWER MRC (CSBH)
AQLRDVALVE OPERATION METHOD
THE MEANS USED TO CONTROL THE OPERATION OF THE VALVE.
Enter the applicable reply code from the table below
(AQLRDAAD*;AQLRDADX$$DAAE*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AAB | AIR |
| AAC | AUTOMATIC |
| AAD | ELECTRIC MOTOR |
| ADE | GAS |
| AAE | HYDRAULIC |
| AAF | MANUAL |
| ADX | MANUAL WITH GEAR UNIT |
| AAG | SOLENOID |
| ADY | STEAM |
IF STYLE/REPLY CODE(s) AC WERE ENTERED FOR MRC CSBH, YOU MUST ANSWER MRC (FREQ and FAAZ and AMPS)
IF STYLE/REPLY CODE(s) DC WERE ENTERED FOR MRC CSBH, YOU MUST ANSWER MRC (AMPS)
CSBH*JVOLTAGE IN VOLTS AND CURRENT TYPE
THE TOTAL ELECTRICAL VOLTAGE,EXPRESSED IN VOLTS,AND THE TYPE OF CURRENT WHETHER ALTERNATING OR DIRECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSBHJAC2.0*;CSBHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AN87) | Reply |
| AC | AC |
| DC | DC |
FREQ*BFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(FREQB2.0)
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDB*;FAAZDC$$DA*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
AMPS*BCURRENT RATING IN AMPS
THE ELECTRICAL CURRENT RATING,EXPRESSED IN AMPERES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AMPSB2.0*;AMPSB2.0$$BM2.0*)
ADQZAEND CONNECTION QUANTITY
THE NUMBER OF END CONNECTIONS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ADQZA10*)
IF STYLE/REPLY CODE(s) BD, XE OR XG WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AAAR)
IF STYLE/REPLY CODE(s) BE, XF, XH OR XJ WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (CWFD)
IF STYLE/REPLY CODE(s) AA, AC, AE, AG, AR, AV, AW, TK, TL OR TM WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (THSD)
AWLSDCONNECTION TYPE
INDICATES THE TYPE OF CONNECTION/S/.
Enter the applicable reply code from the table below
(AWLSDXF*;AWLSDAR$$DBE*)
| Table 1 |
| Reply Code (AB76) | Reply |
| XE | BRAZING, PIPE |
| XF | BRAZING, TUBE |
| BD | BUTT WELD PIPE |
| BE | BUTT WELD TUBE |
| XG | SOCKET, WELD, PIPE |
| XH | SOCKET, WELD, TUBE |
| XJ | SOLDER, TUBE |
| AW | THREADED EXTERNAL BOSS |
| AR | THREADED EXTERNAL HOSE |
| AG | THREADED EXTERNAL PIPE |
| AC | THREADED EXTERNAL TUBE |
| TK | THREADED EXTERNAL, COMPRESSION |
| TL | THREADED EXTERNAL, FLARED |
| TM | THREADED EXTERNAL, FLARELESS |
| AV | THREADED INTERNAL BOSS |
| AE | THREADED INTERNAL PIPE |
| AA | THREADED INTERNAL TUBE |
AAAR*JNOMINAL PIPE SIZE ACCOMMODATED
A MEASUREMENT OF THE PIPE SIZE THE ITEM WILL ACCOMMODATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAARJA2.0*;AAARJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWFD*JNOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATED TUBE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWFDJA2.0*;CWFDJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AM, JC, JE, JF, NC, NE, NF OR SA WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJD)
IF STYLE/REPLY CODE(s) AN, BF, BR, BS, BW, FB, MT, NG, NP, NT, PF, PL, PM, PP, PS, PT, SF, SH OR ZP WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX)
IF STYLE/REPLY CODE(s) SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJE) or (CQJX and CQQR) or (CQJX and CTTC)
IF STYLE/REPLY CODE(s) EM OR MJ WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and AAJE) or (CQJX and CQQR)
IF STYLE/REPLY CODE(s) NH WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP)
IF STYLE/REPLY CODE(s) RD WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR)
IF STYLE/REPLY CODE(s) SJ OR SK WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CQQR) or (CQJX and CTTC) or (CQJX and AAJE)
IF STYLE/REPLY CODE(s) JS OR NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD) or (CQJX and CMLP and AAJE)
IF STYLE/REPLY CODE(s) NM WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP) or (CQJX and CQQR)
IF STYLE/REPLY CODE(s) NJ OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP and AAJD)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDUN*;THSDDNJ$$DNF*)
| Table 1 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| AN | ANPT |
| BF | BSF |
| ZP | BSP. L |
| FB | BSP.F |
| PL | BSP.PL |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| BW | BSW |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NG | NGO |
| NH | NH |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PF | PTF-SPL SHORT |
| RD | ROUND |
| SJ | SI |
| SK | SI-M |
| SA | STUB ACME |
| MT | SUBMARINE THD |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJXJA2.0*;CQJXJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the alpha-numeric reply with a minimum of one character.
(CMLPAX2)
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAJ3)
AAJE*JTHREAD PITCH DIAMETERS
THE MINIMUM AND MAXIMUM PITCH DIAMETER LIMITS OF A STRAIGHT SCREW THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AAJEJAM32.0/P50.0*;AAJEJAM32.0/P50.0$$JA*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CQQRB2.0*;CQQRB2.0$$BM2.0*)
CTTC*JTHREAD TOLERANCE CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING ESTABLISHED PITCH AND CREST DIAMETER TOLERANCE POSITION AND GRADE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CTTCJEXT2.0*;CTTCJEXT2.0$$JEXT2.1*)
| Table 1 |
| Reply Code (AN73) | Reply |
| EXT | EXTERNAL |
| NTE | INTERNAL |
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJBSV2*;TMQYJBSV2$$JBSV3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| BST | CHECK VALVE |
| BSU | END CAP |
| AQF | HANDLE |
| BSV | RELIEF VALVE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDDVG*;CBBLDDVH$$DDVK*)
| Table 1 |
| Reply Code (AN47) | Reply |
| DVG | DETENT POSITIONED SPOOL |
| DVH | PARALLEL CIRCUIT |
| DVJ | SERIES CIRCUIT |
| DVK | SPRING RETURN SPOOL |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| ML | MATERIAL |
| MH | MESH |
| ME | METHOD |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information