Two or more HOSE ASSEMBLY, METALLIC, and HOSE ASSEMBLY, NONMETALLIC, of different characteristics stocked as one unit.
ISAC Reply 3AEE added to MRC AWLS.
ISAC Reply 3AET added to MRC AWLS.
ISAC Reply 3AEU added to MRC AWLS.
ISAC Reply 3AEX added to MRC AWLS.
ISAC Reply 3AIB added to MRC AWLS.
ISAC Reply 3AIC added to MRC AWLS.
ISAC Reply 3DRE added to MRC AWLS.
ISAC Reply 3HOU added to MRC AWLS.
ISAC Reply 1A deleted from MRC AWLS.
ISAC Reply 1B deleted from MRC AWLS.
ISAC Reply 1C deleted from MRC AWLS.
ISAC Reply 1D deleted from MRC AWLS.
ISAC Reply 1E deleted from MRC AWLS.
ISAC Reply 1F deleted from MRC AWLS.
ISAC Reply 1G deleted from MRC AWLS.
ISAC Reply 1H deleted from MRC AWLS.
ISAC Reply 1J deleted from MRC AWLS.
ISAC Reply 1K deleted from MRC AWLS.
ISAC Reply 1L deleted from MRC AWLS.
ISAC Reply 1M deleted from MRC AWLS.
ISAC Reply 3AEE added to MRC MEDA.
ISAC Reply 3DQX added to MRC MEDA.
ISAC Reply 3DQY added to MRC MEDA.
ISAC Reply 3HOU added to MRC MEDA.
ISAC Reply 1A deleted from MRC MEDA.
ISAC Reply 1B deleted from MRC MEDA.
ISAC Reply 1C deleted from MRC MEDA.
ISAC Reply 1D deleted from MRC MEDA.
ISAC Reply 1E deleted from MRC MEDA.
ISAC Reply 1F deleted from MRC MEDA.
ISAC Reply 3AEE added to MRC ABJH.
ISAC Reply 3DQX added to MRC ABJH.
ISAC Reply 3HOU added to MRC ABJH.
ISAC Reply 1A deleted from MRC ABJH.
ISAC Reply 1B deleted from MRC ABJH.
ISAC Reply 1C deleted from MRC ABJH.
ISAC Reply 1D deleted from MRC ABJH.
ISAC Reply 1E deleted from MRC ABJH.
ISAC Reply 1F deleted from MRC ABJH.
ISAC Reply 3AEE added to MRC AKUU.
ISAC Reply 3AET added to MRC AKUU.
ISAC Reply 3AEU added to MRC AKUU.
ISAC Reply 3HOU added to MRC AKUU.
ISAC Reply 1A deleted from MRC AKUU.
ISAC Reply 1B deleted from MRC AKUU.
ISAC Reply 1C deleted from MRC AKUU.
ISAC Reply 1D deleted from MRC AKUU.
ISAC Reply 1E deleted from MRC AKUU.
ISAC Reply 1F deleted from MRC AKUU.
ISAC Reply 1G deleted from MRC AKUU.
ISAC Reply 1H deleted from MRC AKUU.
ISAC Reply 1J deleted from MRC AKUU.
ISAC Reply 1K deleted from MRC AKUU.
ISAC Reply 1L deleted from MRC AKUU.
ISAC Reply 1M deleted from MRC AKUU.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AEX added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1E deleted from MRC THSD.
ISAC Reply 1F deleted from MRC THSD.
ISAC Reply 1G deleted from MRC THSD.
ISAC Reply 1H deleted from MRC THSD.
ISAC Reply 1J deleted from MRC THSD.
ISAC Reply 1K deleted from MRC THSD.
ISAC Reply 1L deleted from MRC THSD.
ISAC Reply 1M deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQQR.
ISAC Reply 3AEX added to MRC CQQR.
ISAC Reply 3HOU added to MRC CQQR.
ISAC Reply 1A deleted from MRC CQQR.
ISAC Reply 1B deleted from MRC CQQR.
ISAC Reply 1C deleted from MRC CQQR.
ISAC Reply 1D deleted from MRC CQQR.
ISAC Reply 1E deleted from MRC CQQR.
ISAC Reply 1F deleted from MRC CQQR.
ISAC Reply 1G deleted from MRC CQQR.
ISAC Reply 1H deleted from MRC CQQR.
ISAC Reply 1J deleted from MRC CQQR.
ISAC Reply 1K deleted from MRC CQQR.
ISAC Reply 1L deleted from MRC CQQR.
ISAC Reply 1M deleted from MRC CQQR.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3AEX added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1C deleted from MRC AAJF.
ISAC Reply 1D deleted from MRC AAJF.
ISAC Reply 1E deleted from MRC AAJF.
ISAC Reply 1F deleted from MRC AAJF.
ISAC Reply 1G deleted from MRC AAJF.
ISAC Reply 1H deleted from MRC AAJF.
ISAC Reply 1J deleted from MRC AAJF.
ISAC Reply 1K deleted from MRC AAJF.
ISAC Reply 1L deleted from MRC AAJF.
ISAC Reply 1M deleted from MRC AAJF.
ISAC Reply 1A deleted from MRC AAAR.
ISAC Reply 1B deleted from MRC AAAR.
ISAC Reply 1C deleted from MRC AAAR.
ISAC Reply 1D deleted from MRC AAAR.
ISAC Reply 1E deleted from MRC AAAR.
ISAC Reply 1F deleted from MRC AAAR.
ISAC Reply 1G deleted from MRC AAAR.
ISAC Reply 1H deleted from MRC AAAR.
ISAC Reply 1J deleted from MRC AAAR.
ISAC Reply 1K deleted from MRC AAAR.
ISAC Reply 1L deleted from MRC AAAR.
ISAC Reply 1M deleted from MRC AAAR.
MRC ABKG has been deleted
MRC ABKU has been deleted
MRC AKXL has been deleted
MRC AKXM has been deleted
MRC MDCL has been deleted
MRC STDC has been deleted
MRC AJED has been deleted
MRC AJEE has been deleted
MRC ABMD has been deleted
MRC ABMH has been deleted
MRC CQRB has been deleted
MRC AKUT has been deleted
MRC CWBZ has been deleted
MRC AHNX has been deleted
MRC AEPR has been deleted
MRC AFQN has been deleted
MRC AGFF has been deleted
MRC ADUZ has been deleted
MRC ADUY has been deleted
MRC CRFY has been deleted
MRC CQJX has been deleted
MRC CMLP has been deleted
MRC AAJD has been deleted
MRC AAJE has been deleted
MRC CTTC has been deleted
MRC CWFD has been deleted
MRC ADLP has been deleted
MRC CWDW has been deleted
MRC AECS has been deleted
MRC CTCJ has been deleted
MRC AHNC has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED45230*)
IF STYLE/REPLY CODE(s) AAK, AAL, AAY, AAZ, ABA, ABC, ABD, AEC, ALZ, AMK, AMY OR ANF WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (THSD and AAJF)
IF STYLE/REPLY CODE(s) AAK, AAL, AAY, ABB, ADV, ADZ, AED, AEE, AEH, ALZ, AMY, ANF, AWA OR AWC WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AAAR)
AWLSDCONNECTION TYPE
INDICATES THE TYPE OF CONNECTION/S/.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWLS3AEUDABF*;AWLS3AEUDABF$DADK*;AWLS3AEUDABF$$DADK*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3AIC | FOURTH END |
| 3DRE | INLET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| AEJ | AIR CHUCK QUICK DISCONNECT |
| AER | ANGLE |
| AFV | CLAMP |
| ABF | COLLAR |
| AGY | EXTERNAL |
| AEF | EXTERNAL QUICK DISCONNECT |
| ADK | FEMALE ELBOW |
| ADL | FEMALE SWIVEL |
| AJQ | FITTING END |
| ACV | FLANGE |
| AEG | GLAD HAND QUICK DISCONNECT |
| ALG | HOSE |
| ALZ | INTERNAL AND EXTERNALLY THREADED PIPE |
| AEE | INTERNAL QUICK DISCONNECT |
| AMK | INTERNALLY AND EXTERNALLY THREADED TUBE |
| AMY | INTERNALLY THREADED PIPE AND EXTERNALLY THREADED TUBE |
| ANF | INTERNALLY THREADED TUBE AND EXTERNALLY THREADED PIPE |
| ANH | INTERNALLY UNTHREADED |
| AEK | PIPE |
| ADZ | PLAIN FACE FLANGE |
| ADV | RAISED FACE FLANGE |
| AED | RECESSED FLANGE |
| ADY | STRAIGHT BANJO |
| ADX | STRAIGHT BANJO WITH COLLAR |
| ADP | STRAIGHT FEMALE |
| ADJ | STRAIGHT MALE |
| AUK | SWIVEL |
| AUU | THREAD |
| AAG | THREADED |
| ABP | THREADED EXTERNAL |
| AAY | THREADED EXTERNAL BOSS |
| AAZ | THREADED EXTERNAL HOSE |
| AAK | THREADED EXTERNAL PIPE |
| ABA | THREADED EXTERNAL TUBE |
| ABQ | THREADED INTERNAL |
| ABB | THREADED INTERNAL BOSS |
| AEC | THREADED INTERNAL GAS CYLINDER |
| ABC | THREADED INTERNAL HOSE |
| AAL | THREADED INTERNAL PIPE |
| ABD | THREADED INTERNAL TUBE |
| AEH | UNIVERSAL QUICK DISCONNECT |
| AVY | UNTHREADED |
| AEB | UNTHREADED EXTERNAL HOSE |
| ACT | UNTHREADED EXTERNAL TUBE |
| AWA | UNTHREADED FLUID PASSAGE BOLT |
| AWC | UNTHREADED PIPE |
| AWF | UNTHREADED TUBE W/FORMED END |
MEDADMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MEDA3AEEDAKZ*;MEDA3AEEDAKZ$DACK*;MEDA3AEEDAKZ$$DACK*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN91) | Reply |
| AAB | ACETYLENE |
| AAC | ACID |
| ACH | ACID, NITRIC |
| AAD | AGRICULTURAL SPRAY SOLUTION |
| AAE | AIR |
| AKV | AIRCRAFT FUEL |
| AKW | AIRCRAFT POWER PLANT |
| AKX | AIR-FRAME FUEL |
| ABW | ALCOHOL |
| AAF | ALCOHOL, ETHYL |
| AAG | ALCOHOL, METHYL |
| AKS | ALKALIES |
| AAH | AMMONIA, GASEOUS |
| AAJ | AMMONIA, LIQUID |
| AHF | ANTIFREEZE |
| ALC | ARTIC OIL |
| ABH | BRAKE FLUID, NONMINERAL OIL |
| AAK | BROMOCHLOROMETHANE |
| AAL | BUTANE |
| AAM | CARBON DIOXIDE |
| ACW | CHEMICAL |
| AKU | CORROSIVE |
| AEM | DETERGENT |
| ALA | DEXTRON |
| AHG | DRY CHEMICAL |
| AEN | EFFLUENT, DOMESTIC |
| ALB | ENGINE OIL |
| AAN | ETHYLENE GLYCOL |
| ADS | ETHYLENE GLYCOL/WATER MIXTURE |
| ADG | FLUID |
| AHH | FOAM LIQUID |
| ACR | FUEL |
| ALJ | FUEL OIL |
| ACX | FUEL, DIESEL |
| AAY | FUEL/OIL, HYDROCARBON |
| AAP | FUMIGANT |
| AAQ | GAS |
| AEP | GAS, EXHAUST |
| ABA | GAS, INERT |
| ABD | GAS, NATURAL |
| ALG | GEAR OIL |
| AAR | GREASE |
| AKT | HEDROCARBONS |
| ALH | HIGH PRESSURE HYDRAULIC LINE |
| ALK | HISTOPATHOLIGICAL SPECIMEN |
| AAS | HYDRAULIC FLUID |
| ADB | HYDRAULIC FLUID, MIL-H-5606 |
| AAW | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| AAX | HYDRAULIC FLUID, SILICATE-ESTER BASE |
| AAT | HYDRAULIC FLUID, WATER BASE |
| ALN | HYDRAULIC HIGH PRESSURE SYSTEM |
| AAZ | HYDROGEN |
| AKZ | INSECTICIDE |
| AHT | LACQUER |
| ABB | LIQUID, INGESTED |
| AGD | LUBRICANT, PETROLEUM BASE |
| AJW | METHANOL |
| ALQ | NITRIC ACID |
| ALR | NITROGEN |
| ABE | NITROGEN, GASEOUS |
| ABF | NITROGEN, LIQUID |
| AGW | NITROUS OXIDE |
| ALS | NONMINERAL OIL |
| ALM | NONPETROLEUM BASE HYDRAULIC FLUID |
| ACJ | OIL |
| AKY | OIL LINE |
| ABC | OIL, LUBRICATING, DIESTER BASE |
| ABJ | OXYGEN, GASEOUS |
| ABK | OXYGEN, LIQUID |
| ABL | PAINT |
| ALD | PERFLUORA CYCLIC ETHER |
| ALP | PNEUMATIC HIGH PRESSUE SYSTEM |
| ALV | POLYALKALINE GLYCOL REFRIGERANT OIL |
| ALU | PORTABLE UTILITY SUCTION PUMP |
| ACK | PROPANE |
| AFD | REFRIGERANT |
| AFE | REFRIGERANT 114 |
| ABM | REFRIGERANT 12 |
| ABN | REFRIGERANT 13 |
| AMC | REFRIGERANT 134 |
| ACM | REFRIGERANT 22 |
| AEX | SAND |
| AGX | SILICON FLUID |
| ALX | SILICONE FLUID |
| AEH | SOLVENT |
| ABP | STEAM |
| ABQ | TRICHLOROETHYLENE |
| ADK | VACUUM |
| AHK | VAPORIZING LIQUID |
| ABR | WATER |
| AHC | WATER, DRINKING |
| ABS | WATER, FRESH |
| ABT | WATER, SALT |
| ALW | WATER-ALCOHOL MIXTURE |
| AKC | WATER-GLYCOL |
CRXXJMEASURING METHOD AND LENGTH
THE MEANS USED AND THE MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRXXJAARN2.0*;CRXXJAARN2.0$$JAARN2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN68) | Reply |
| EX | EXCLUDING END FITTINGS |
| XW | EXTENDED WORKING |
| RL | OVERALL |
| RN | RANDOM |
| WK | WORKING |
CQBC*JMINIMUM TENSILE STRENGTH
THE MAXIMUM RATED LOAD IN TENSION APPLIED IN A LONGITUDINAL DIRECTION,PER UNIT OF CROSS-SECTIONAL AREA,THAT THE MATERIAL CAN WITHSTAND WITHOUT RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with five character(s) exactly.
(CQBCJNB7U3Y*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
| G | POUNDS PER SQUARE INCH GAGE |
ABJH*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGMJL2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
| G | POUNDS PER SQUARE INCH GAGE |
CRDW*JHYDROSTATIC TEST PRESSURE
A STEADY,UNIFORM,INTERNAL,STATIC PRESSURE THAT THE ITEM MUST WITHSTAND WITHOUT LEAKAGE,ABNORMAL DISTORTION,OR DAMAGE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRDWJN2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
| G | POUNDS PER SQUARE INCH GAGE |
CQBD*JBURST TEST PRESSURE
THE MINIMUM INTERNAL PRESSURE RATING,DETERMINED BY DESTRUCTION TESTS,AT WHICH THE ITEM CAN BE EXPECTED TO RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQBDJL2.0*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
| G | POUNDS PER SQUARE INCH GAGE |
CRSM*BVACUUM IN TORR
THE ULTIMATE MAXIMUM VACUUM,EXPRESSED IN TERMS OF ABSOLUTE PRESSURE,THAT MAY BE PRODUCED BY OR APPLIED TO AN ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CRSMB2.0)
ADJS*DEXTERIOR COLOR
THE HUE OR TINT OF THE EXTERIOR OF THE ITEM.
Enter the applicable reply code from the table below
(ADJSDGY0002*;ADJSDCR0000$DNA0001*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| CR0000 | CREAM |
| GL0000 | GOLD |
| GY0002 | GRAY, LIGHT |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0011 | GREEN, OLIVE |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| NA0001 | NATURAL METALLIC |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RE0000 | RED |
| SL0000 | SILVER |
| TA0000 | TAN |
| WH0000 | WHITE |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
| YE0046 | YELLOW, TRANSPARENT |
CRJM*DOUTER COVERING ENVIRONMENTAL PROTECTION
THE TYPE OF PROTECTION PROVIDED BY THE OUTER COVERING.
Enter the applicable reply code from the table below
(CRJMDAJC*;CRJMDAJB$$DABH*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| ABY | ACID RESISTANT |
| AEQ | AGE RESISTANT |
| ABZ | ALCOHOL RESISTANT |
| ACK | ALKALI RESISTANT |
| AAB | CHEMICAL RESISTANT |
| ACB | COLD RESISTANT |
| AAC | CORROSION RESISTANT |
| AHZ | ESTER RESISTANT |
| AJA | ETHYLENE GLYCOL RESISTANT |
| AAJ | FIRE RESISTANT |
| AGC | FIRE RETARDANT |
| AAL | FUEL RESISTANT |
| ACQ | GREASE RESISTANT |
| AAP | HEAT RESISTANT |
| AEL | HYDRAULIC FLUID |
| ADS | HYDRAULIC SOLUTION RESISTANT |
| AJB | INCOMBUSTIBLE |
| ACR | KETONE RESISTANT |
| AEM | LIGHT RESISTANT |
| AGF | LOW TEMPERATURE |
| ACC | MILDEW RESISTANT |
| AAX | OIL RESISTANT |
| AJC | OXIDATION RESISTANT |
| ACN | OZONE RESISTANT |
| AJD | PAINT RESISTANT |
| ABA | SALT WATER RESISTANT |
| ABE | SHOCK RESISTANT |
| ABF | SOLVENT RESISTANT |
| ABT | SPRAY TIGHT |
| ACW | STEAM RESISTANT |
| ADZ | VERMIN PROOF |
| ABH | VIBRATION PROOF |
| ABJ | VIBRATION RESISTANT |
| ACM | WATER RESISTANT |
| ABK | WATERPROOF |
| ABM | WEATHERPROOF |
CQCS*HLAYER COMPOSITION AND LOCATION
THE MATERIAL AND FORMATION IDENTIFYING THE STRUCTURAL CHARACTERISTIC/S/ OF THE ITEM AND LOCATION.
Enter the applicable Reply Code from Tables 1 & 2 below.
(CQCSHGBE2.0*;CQCSHGBE2.0$HGBE2.0*;CQCSHGBE2.0$$HGBE2.1*)
| Table 1 |
| Reply Code (AN92) | Reply |
| L | 10TH LAYER |
| M | 11TH LAYER |
| B | 1ST LAYER |
| C | 2ND LAYER |
| D | 3RD LAYER |
| E | 4TH LAYER |
| F | 5TH LAYER |
| G | 6TH LAYER |
| H | 7TH LAYER |
| J | 8TH LAYER |
| K | 9TH LAYER |
| A | INNER |
| N | OUTER LAYER |
| Table 2 |
| Reply Code (AD14) | Reply |
| AD | BRAIDED ALUMINUM ALLOY WIRE |
| FX | BRAIDED ASBESTOS CORD |
| DE | BRAIDED BRONZE WIRE |
| AE | BRAIDED COPPER WIRE |
| AG | BRAIDED CORROSION RESISTANT STEEL WIRE |
| KL | BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| ZZ | BRAIDED COTTON CORD |
| EW | BRAIDED FABRIC |
| DX | BRAIDED FIBER |
| KM | BRAIDED NICKEL COPPER ALLOY WIRE |
| AB | BRAIDED POLYAMIDE CORD |
| FP | BRAIDED POLYESTER CORD |
| AC | BRAIDED RAYON CORD |
| EA | BRAIDED SISAL FIBER |
| AF | BRAIDED STEEL WIRE |
| EF | BRAIDED SYNTHETIC CORD |
| EQ | BRAIDED TEXTILE YARN |
| DM | BRAIDED WIRE |
| AJ | CORRUGATED ALUMINUM ALLOY |
| AK | CORRUGATED COPPER |
| AL | CORRUGATED CORROSION RESISTANT STEEL |
| AM | CORRUGATED STEEL |
| SK | CORRUGATED, POLYVINYLCHLORIDE |
| FE | COTTON |
| GE | COTTON YARN |
| LU | DACRON |
| RU | ETHYLENE PROPYLENE DIENNE-POLY-METHYLENE PLASTIC |
| MV | ETHYLENE PROPYLENE DIENNE-POLY-METHYLENE RUBBER |
| MN | FIBERGLASS CLOTH |
| KV | GALVANIZED STEEL WIRE |
| AR | HELIX ALUMINUM ALLOY COIL |
| AS | HELIX COPPER COIL |
| AT | HELIX CORROSION RESISTANT STEEL COIL |
| AU | HELIX STEEL COIL |
| DQ | HELIX WIRE COIL |
| SL | HELIX, NYLON MONOFILAMENT |
| NU | KEVLAR BRAID |
| FK | LINEN |
| PU | MOLDED ETHYLCELLULOSE |
| KN | MOLDED PLASTIC |
| AV | MOLDED POLYTETRAFLUOROETHYLENE |
| KP | MOLDED POLYURETHANE |
| AW | MOLDED RUBBER |
| FG | MOLDED RUBBER, BUNA-N |
| GA | MOLDED RUBBER, BUNA-S |
| DD | MOLDED RUBBER, CHLOROPRENE |
| DB | MOLDED RUBBER, COMPOSITION |
| KQ | MOLDED RUBBER, ETHYLENE PROPYLENE |
| EB | MOLDED RUBBER, NATURAL |
| HP | MOLDED RUBBER, NEOPRENE |
| KJ | MOLDED RUBBER, NITRILE |
| DA | MOLDED RUBBER, SYNTHETIC |
| MU | NON-METALLIC BRAID |
| LV | NYLON TUBE |
| DL | PLASTIC |
| PJ | PLASTIC, POLYVINYL CHLORIDE |
| SS | PLASTIC, TETRAFLUOROETHYLENE |
| GK | POLYESTER |
| DR | POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER |
| QV | POLYTETRAFLUOROETHYLENE PLASTIC |
| KY | RUBBER |
| FY | RUBBER COMPOSITION |
| BC | RUBBER IMPREGNATED BRAIDED ALUMINUM ALLOY WIRE |
| BD | RUBBER IMPREGNATED BRAIDED COPPER WIRE |
| BE | RUBBER IMPREGNATED BRAIDED CORROSION RESISTANT STEEL WIRE |
| AZ | RUBBER IMPREGNATED BRAIDED COTTON CORD |
| DG | RUBBER IMPREGNATED BRAIDED FABRIC |
| BA | RUBBER IMPREGNATED BRAIDED POLYAMIDE CORD |
| JU | RUBBER IMPREGNATED BRAIDED POLYESTER CORD |
| BB | RUBBER IMPREGNATED BRAIDED RAYON CORD |
| BF | RUBBER IMPREGNATED BRAIDED STEEL WIRE |
| BG | RUBBER IMPREGNATED COTTON FABRIC |
| DJ | RUBBER IMPREGNATED FABRIC |
| ST | RUBBER IMPREGNATED HELIX WIRE COIL |
| BH | RUBBER IMPREGNATED POLYAMIDE FABRIC |
| BJ | RUBBER IMPREGNATED RAYON FABRIC |
| JB | RUBBER IMPREGNATED WIRE |
| FC | RUBBER IMPREGNATED WOVEN COTTON CORD |
| DF | RUBBER IMPREGNATED WOVEN FABRIC |
| SR | RUBBER, GRADE 149FS75, B F GOODRICH |
| GB | RUBBER, NATURAL |
| RD | RUBBER, NATURAL-SYNTHETIC |
| EC | RUBBER, SYNTHETIC |
| BK | SHEET RUBBER |
| QU | SOLVENT IMPREGNATED POLYESTER FABRIC |
| BM | SPIRAL INTERLOCKED COPPER |
| BR | SPIRAL INTERLOCKED CORROSION RESISTANT STEEL |
| BX | SPIRAL INTERLOCKED CORROSION RESISTANT STEEL WITH PACKING |
| BN | SPIRAL INTERLOCKED COTTON |
| BQ | SPIRAL INTERLOCKED RAYON |
| BS | SPIRAL INTERLOCKED STEEL |
| BY | SPIRAL INTERLOCKED STEEL WITH PACKING |
| EP | SPIRALLY LAID BRASS WIRE |
| CD | SPIRALLY LAID COPPER WIRE |
| DZ | SPIRALLY LAID CORD STRANDS |
| CE | SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| BZ | SPIRALLY LAID COTTON CORD |
| CA | SPIRALLY LAID POLYAMIDE CORD |
| CB | SPIRALLY LAID RAYON CORD |
| CF | SPIRALLY LAID STEEL WIRE |
| CK | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SM | SPIRALLY WRAPPED COTTON DUCK |
| SN | SPIRALLY WRAPPED COTTON DUCK, RUBBER IMPREGNATED |
| CG | SPIRALLY WRAPPED COTTON FABRIC |
| SP | SPIRALLY WRAPPED DUCK |
| SQ | SPIRALLY WRAPPED DUCK, RUBBER IMPREGNATED |
| EY | SPIRALLY WRAPPED FABRIC |
| KR | SPIRALLY WRAPPED POLYAMIDE FABRIC |
| CH | SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE FABRIC |
| DS | SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER |
| KS | SPIRALLY WRAPPED RAYON FABRIC |
| CJ | SPIRALLY WRAPPED RUBBER FABRIC |
| CL | SPIRALLY WRAPPED STEEL FABRIC |
| NV | STAINLESS BRAID |
| SA | STEEL WIRE, CADMIUM COATED |
| SE | STEEL WIRE, COPPER COATED |
| SC | STEEL WIRE, CORROSION RESISTANT |
| KU | SYNTHETIC YARN |
| PV | TEXTILE BRAID |
| GV | TEXTILE YARN |
| SH | WIRE |
| DP | WIRE REINFORCED |
| CW | WOVEN COTTON CORD |
| KT | WOVEN COTTON WITH INTERWOVEN STEEL WIRE |
| ED | WOVEN FABRIC |
| CY | WOVEN POLYAMIDE CORD |
| CX | WOVEN POLYESTER FIBER CORD |
| CZ | WOVEN RAYON CORD |
| KG | WRAPPED POLYVINYLIDENE CHLORIDE |
| DC | WRAPPED RUBBER, CHLOROPRENE |
| EJ | WRAPPED RUBBER, COMPOSITION |
| DY | WRAPPED RUBBER, NATURAL |
| DK | WRAPPED RUBBER, SYNTHETIC |
ACKH*JMINIMUM INSIDE BENDING RADIUS
THE MINIMUM INSIDE BENDING RADIUS FORMED WITHOUT STRESSING OR DEFORMATION OF A FLEXIBLE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACKHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAGT*JWALL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE WALL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAGTJAB2.0*;AAGTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAB2.0*;AARXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAC2.0*;ABKVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAA2.0*;ADJTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAC2.0*;ADJUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJV*JOUTSIDE WIDTH
AN OUTSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJVJAC2.0*;ADJVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJW*JOUTSIDE LENGTH
A MEASUREMENT OF THE LONGEST OUTSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJWJAC2.0*;ADJWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRWL*DINSIDE SURFACE CONDITION
THE CONDITION OF THE ITEM WITH RESPECT TO THE TEXTURE OF THE INNER SURFACE.
Enter the applicable reply code from the table below
(CRWLDCV)
| Table 1 |
| Reply Code (AN72) | Reply |
| CV | CONVOLUTED |
| RG | ROUGH |
| SM | SMOOTH |
AKUU*DEND CONNECTION DESIGN
THE PHYSICAL CONFIGURATION OF THE OUTSIDE OF THE END CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AKUU3AEUDST*;AKUU3AEUDST$DEL*;AKUU3AEUDST$$DEL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC41) | Reply |
| EL | ELBOW |
| ST | STRAIGHT |
ADKX*BANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG
THE AMOUNT OF ROTATION IN A COUNTERCLOCKWISE DIRECTION NEEDED TO BRING THE CENTERLINE OF ONE RIGID ELBOW INTO COINCIDENCE WITH THE CENTERLINE OF THE RIGID ELBOW ON THE OPPOSITE END,EXPRESSED IN DEGREES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ADKXB2.0)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AEXDAN*;THSD3AEXDAN$DNZ*;THSD3AEXDAN$$DNZ*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AC | ACME C |
| AG | ACME G |
| AN | ANPT |
| EG | BANJO |
| BF | BRITISH STANDARD FINE (BSF) |
| BW | BRITISH STANDARD WHITWORTH (BSW) |
| ZP | BSP. L |
| FB | BSP.F |
| PL | BSP.PL |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| EH | FLARED, 37 DEGREE |
| GE | G |
| SM | ISO M |
| SS | ISO S |
| JL | JIC |
| NG | NGO |
| NH | NH |
| NZ | NH-SPCL |
| SP | NPS |
| SC | NPSC |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| SL | NPSL |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PE | PTF-SPL EXTRA SHORT |
| RR | R |
| RD | ROUND |
| MT | SUBMARINE THD |
| UN | UN |
| NE | UNEF |
| NF | UNF |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| NJ | UNIFIED NATIONAL JOINT (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| JS | UNJS |
| NS | UNS |
CQQR*BTHREAD PITCH IN MILLIMETERS
A MEASUREMENT OF DISTANCE BETWEEN CORRESPONDING POINTS ON TWO ADJACENT THREADS MEASURED PARALLEL TO THE THREAD AXIS,EXPRESSED IN MILLIMETERS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(CQQR3AEXB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3AEXDAAG*;AAJF3AEXDAAG$DAAL*;AAJF3AEXDAAG$$DAAL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AAAR*JNOMINAL PIPE SIZE ACCOMMODATED
A MEASUREMENT OF THE PIPE SIZE THE ITEM WILL ACCOMMODATE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAARJA2.0*;AAARJA2.0$JA2.0*;AAARJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CXBP*JFIRST END DISTANCE BETWEEN LUGS
THE DISTANCE BETWEEN THE LUGS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXBPJAA2.0*;CXBPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFVT*;CBBLDASH$$DABN*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AAK | ELECTROSTATIC DISCHARGE CAPABILITY |
| FVT | IDENTICAL ENDS |
| ABN | INTERNAL SUPPORT |
| ABP | NONSKIVE |
| ABQ | NUTS DRILLED FOR LOCKWIRE |
| ABR | PERFORATED OUTER COVER |
| ABS | REUSABLE END FITTINGS |
| ABT | SELF-SEALING |
| ASH | SPIRAL SPRING COILED |
| FVU | SWIVEL END |
IF STYLE/REPLY CODE(s) FA WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (ALAX)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDNR*;ENACDFA$$DNR*)
| Table 1 |
| Reply Code (EN02) | Reply |
| FA | COMPREHENSIVE PROCUREMENT GUIDELINE - LANDSCAPING PRODUCTS - GARDEN AND SOAKER HOSES |
| NR | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
ALAX*BBIOBASED CONTENT PERCENTAGE
THE STATED PERCENTAGE OF THE ITEM'S CONTENT THAT IS BIOBASED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ALAXB2.0)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ012*;HZRDDHAZ011$$DHAZ042*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ011 | CHROMIUM |
| HAZ012 | COPPER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
AFHS*AACCESSORY COMPONENT QUANTITY
THE NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter the numeric reply with a minimum of one digit.
(AFHSA10*)
AFJH*GFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter clear text.
(AFJHGCLEARTEXT)
AJAF*JUNPACKAGED UNIT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAFJAA2.0*;AJAFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJW*ACOMPONENT QUANTITY
THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJJWA10*)
AJJX*DCOMPONENT DOCUMENT ORIGIN
THE ORIGINATOR /GOVERNMENTAL,INDUSTRIAL,OR OTHERWISE/ OF THE AVAILABLE DOCUMENT WHICH LISTS THE COMPONENT/S/ OF THE ITEM.
Enter the applicable reply code from the table below
(AJJXDAF)
| Table 1 |
| Reply Code (AF59) | Reply |
| AF | GOVERNMENT |
| AD | INDUSTRIAL |
AJJY*ADOCUMENT SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS THE DOCUMENT.
Enter the alpha-numeric reply with five character(s) exactly.
(AJJYAA0R7Q)
AJJZ*DDOCUMENT TYPE
INDICATES THE TYPE OF DOCUMENT BY THE TITLE.
Enter the applicable reply code from the table below
(AJJZDDE)
| Table 1 |
| Reply Code (AF70) | Reply |
| BE | CATALOG SHEET |
| AN | ENGINEERING DRAWING |
| BK | INDUSTRIAL DRAWING |
| CV | MFR DRAWING |
| BN | MILITARY DRAWING |
| BT | PARTS LIST |
| DE | SUPPORT EQUIPMENT REQUIREMENT SHEET |
AJKB*ACOMPONENT DOCUMENT PAGE NUMBER
THE PAGE NUMBER INDICATING THE LOCATION OF THE COMPONENT/S/ LISTED IN THE DOCUMENT.
Enter the alpha-numeric reply with a minimum of one character.
(AJKBAC8)
AJKC*GSUPPLY ITEMS AND QUANTITIES
A LISTING OF THOSE MAJOR COMPONENTS WHICH ARE COMPRISED OF A NATIONAL STOCK NUMBER,AN ITEM NAME,STANDARDIZED NAME,OR PART NAME,AND THE NUMBER OF EACH.
Enter clear text.
(AJKCGCLEARTEXT)
AJKD*GNONSUPPLY ITEMS AND QUANTITIES
A LISTING OF THOSE MAJOR COMPONENTS,OUTSIDE THE SCOPE OF AN ITEM OF SUPPLY TO BE CATALOGED,AS INDICATED BY THE NAME OF THE MANUFACTURER,AND THE NAME AND NUMBER OF THE ITEM AS IDENTIFIED BY THE MANUFACTURER,AND THE NUMBER OF EACH.
Enter clear text.
(AJKDGCLEARTEXT)
AJKE*AEND ITEM SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS OR MANUFACTURES THE END ITEM.
Enter the alpha-numeric reply with five character(s) exactly.
(AJKEAE4T2L)
AKMX*DSTERILITY
AN INDICATION OF WHETHER OR NOT THE ITEM IS FREE OF LIVING ORGANISMS.
Enter the applicable reply code from the table below
(AKMXDM)
| Table 1 |
| Reply Code (AG96) | Reply |
| M | NONSTERILE |
AKVY*GACCESSORY CONTROLLING AGENCY
THE NAME OF THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION THAT CONTROLS THE MANUFACTURE OF THE ACCESSORY ITEM. REINSTATED ON 8/29/16
Enter clear text.
(AKVYGCLEARTEXT)
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
AMWN*AMODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AMWNAF5)
ANGD*DDISPOSITION AFTER INITIAL USE
AN INDICATION OF THE DISPOSITION OF AN ITEM AFTER INITIAL USE.
Enter the applicable reply code from the table below
(ANGDDAB)
| Table 1 |
| Reply Code (AJ61) | Reply |
| AB | REUSABLE |
AYDR*GDOCUMENT IDENTIFICATION
THE NUMBER OR SYMBOL/S/ USED TO IDENTIFY THE DOCUMENT.
Enter clear text.
(AYDRGCLEARTEXT)
AYDS*GEND ITEM NAME
THE APPROVED ITEM NAME OR PART NAME OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter clear text.
(AYDSGCLEARTEXT)
BPJZ*DUSAGE LOCATION
INDICATES THE LOCATION AT WHICH THE ITEM IS TO BE USED.
Enter the applicable reply code from the table below
(BPJZDDBA)
| Table 1 |
| Reply Code (AJ91) | Reply |
| DBA | COMMUNICATIONS ZONE |
SECL*DSECURITY CLASSIFICATION
A CATEGORY ASSIGNED TO CLASSIFIED INFORMATION OR MATERIAL TO SHOW THE DEGREE OF DAMAGE TO THE INTERESTS OF NATIONAL DEFENSE WHICH COULD RESULT FROM ITS UNAUTHORIZED DISCLOSURE AND TO SHOW THE STANDARD OF PROTECTION REQUIRED TO GUARD AGAINST UNAUTHORIZED DISCLOSURE.
Enter the applicable reply code from the table below
(SECLDU)
| Table 1 |
| Reply Code (AE43) | Reply |
| U | UNCLASSIFIED |
CTJS*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMERED BY PACKAGING OR PACKING MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTJSJLBB2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| LB | POUNDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAGR*LCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRLA1)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1013 | A1 | ROUND |
| AAN1014 | A2 | OVAL |
| AAN1015 | A3 | SQUARE |
| AAN1016 | A4 | RECTANGULAR |
| AAN1017 | A7 | FLAT |
ADJL*LINNER CONVEYING TUBE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE INNER CONVEYING TUBE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADJLLB10*;ADJLLB6$LB5*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1001 | B1 | INTERLOCKED UNPACKED |
| AAN1009 | B10 | ANNULAR CLOSE-PITCH CORRUGATED |
| AAN1010 | B11 | HELICAL OPEN-PITCH CORRUGATED |
| AAN1011 | B12 | HELICAL CLOSE-PITCH CORRUGATED |
| AAN1012 | B13 | WELDED CORRUGATED |
| DR00043 | B14 | PLAIN |
| AAN1002 | B2 | INTERLOCKED PACKED |
| AAN1003 | B3 | OVERLAPPED SQUARE LOCKED UNPACKED |
| AAN1004 | B4 | OVERLAPPED SQUARE LOCKED PACKED |
| AAN1005 | B5 | OVERLAPPED DOUBLEGROOVE UNPACKED |
| AAN1006 | B6 | OVERLAPPED DOUBLEGROOVE PACKED |
| AAN1007 | B8 | OVERLAPPED HIGH RIDGE PACKED |
| AAN1008 | B9 | ANNULAR OPEN-PITCHCORRUGATED |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information