An item carried along by divers under operational conditions in order to reduce buoyancy.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED42386*)
APGFDDESIGN TYPE
INDICATES THE DESIGN TYPE OF THE ITEM.
Enter the applicable reply code from the table below
(APGFDASG*;APGFDEEX$DEEY*)
| Table 1 |
| Reply Code (AK54) | Reply |
| EET | LIGHTWEIGHT |
| EEX | SHALLOW WATER |
| ASG | STANDARD |
| EEY | STANDARD HEAVYWEIGHT |
ALBYDUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDARH*;ALBYDARD$DAQW*;ALBYDARD$$DAQW*)
| Table 1 |
| Reply Code (AH21) | Reply |
| BPQ | ANKLE |
| AQW | ELBOW |
| BBA | FEET |
| AJD | HIP |
| ARD | KNEE |
| ARH | THIGH |
| BPR | WAIST |
| BME | WRIST |
AYMPJGROSS WEIGHT
THE WEIGHT OF THE ITEM FULLY EQUIPPED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AYMPJAJ2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| AJ | KILOGRAMS |
| AS | POUNDS |
BZXMDFASTENING METHOD
THE MEANS BY WHICH THE ITEM IS FASTENED.
Enter the applicable reply code from the table below
(BZXMDHG*;BZXMDKK$DCM*;BZXMDKK$$DCM*)
| Table 1 |
| Reply Code (AF69) | Reply |
| JP | 1 DRAWCORD |
| JQ | 2 DRAWCORDS |
| CH | 2 SNAP FASTENERS ON BELT |
| CJ | 3 SNAP FASTENERS ON BELT |
| CK | 4 SNAP FASTENERS ON BELT |
| DT | ADJUSTABLE BELT W/BUCKLE |
| DV | ADJUSTABLE BELT W/MALE AND FEMALE FASTENER |
| DW | ADJUSTABLE STRAPS W/SNAP |
| MC | ADJUSTABLE TIE |
| GM | ADJUSTING STRAP |
| ET | BAND |
| EW | BAND W/ELASTIC |
| EX | BANDED WRIST |
| KX | BELT |
| HL | BELT LOOPS |
| DX | BELT W/SNAP |
| DY | BELT W/STRAP |
| AB | BUCKLE |
| MF | BUCKLE, QUICK RELEASE |
| AC | BUTTON |
| CQ | BUTTONED FLAP |
| CL | BY PASSING THROUGH BELT LOOPS ON EACH SIDE OF SHIRT |
| EP | CLIP |
| AD | DRAWCORD |
| GW | DRAWCORD THROUGH TUNNEL HEM |
| AE | ELASTIC |
| DN | ELASTIC BAND |
| HK | ELASTIC BRAID |
| HY | ELASTIC CORD |
| FX | ELASTIC COTTON WEBBING |
| BX | ELASTIC DRAWCORD |
| DP | ELASTIC HEEL STRAP |
| JG | ELASTIC HEMMED CUFF |
| KH | ELASTIC STRAP |
| HE | ELASTIC WAISTBAND |
| HQ | EYELETS ALONG BELT TOP |
| LX | FULL BELT |
| LY | HALF BELT |
| KS | HALF BELT W/BAR BUCKLE |
| KR | HALF BELT W/DEE RING |
| EA | HOOK |
| BL | HOOK FASTENER TAPE |
| AH | HOOK-EYE |
| AG | HOOK-PILE FASTENER TAPE |
| HT | INTERLOCKING SLIDE KEEPERS |
| JK | KNITTED CUFFS |
| FD | KNITTED WOOL WRISTLET |
| FE | KNITTED WRIST |
| AK | LACING |
| BZ | LACING THROUGH EYELET |
| DQ | LACING THROUGH EYELETS AND HOOKS |
| KJ | LATEX LOOP |
| JL | LEG STRAP |
| BM | LOOP |
| KK | NAPE STRAP |
| LD | OVERLAPPING RING |
| BN | PILE FASTENER TAPE |
| JA | PRESSURE SEAL SLIDE FASTENER |
| HH | RIBBON TIE |
| FZ | RING |
| FL | ROLLED EDGE/BAND AT WRIST |
| DH | SEWED |
| KW | SEWED TO LINING |
| CA | SEWED-INSIDE OF TROUSER |
| CR | SEWED-OUTSIDE OF TROUSER LEGS |
| MP | SEWN-ON |
| BD | SHOULDER STRAP |
| ED | SLIDE |
| AL | SLIDE FASTENER |
| JC | SLIDE FASTENER W/TABS |
| AM | SLIDE FASTENER, QUICK RELEASE |
| ER | SLOTS |
| DL | SLOTTED |
| AN | SNAP FASTENER |
| CM | SNAP FASTENER ON WAISTBAND |
| DB | SNAP FASTENERS TO BLOCK |
| AP | SNAP HOOK-DEE RING |
| BT | SPRING CLIP |
| AQ | STRAP |
| EG | STRAP W/METAL SLIDE SOCKET |
| BE | STRAP-BUCKLE |
| CE | STRAP-SIDES OF WAISTBAND |
| BF | STRING FASTENER |
| EK | SUSPENDER STRAPS THRU EYELETS FORMING WAIST TIE |
| EL | SUSPENDER STRAPS W/SNAP |
| CP | SUSPENDERS |
| BJ | TAB-BUTTON |
| JF | TAKE-UP BAND |
| CF | TAKE-UP TABS |
| BH | TAKE-UP TIES |
| AR | TIE BELT |
| EH | TIE LOOPS W/SEPARATE TAPE TIE |
| KG | TIE ROPE |
| HC | TIE SIDE |
| DR | TIE STRAP |
| EJ | TIE STRING |
| AS | TIE TAPE |
| CT | TIES |
| CG | TUNNEL LOOPS |
| HX | TWO FRONT-TWO BACK BELT LOOPS |
| CW | TWO STRING TIE-ON |
| DS | W/ELASTICIZED TOP AND SNAP FASTENER AT ANKLE |
| EM | WAIST STRAP W/BUCKLE |
| HG | WEB STRAP W/BUCKLE |
| HJ | WEBBING TIE |
| GA | WRIST STRAP/SHIRRED ELASTIC HEM |
| JM | WRIST STRAPS |
CPTW*JMOUNTING FACILITY SLOT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING FACILITY SLOT,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPTWJAA2.0*;CPTWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CPTX*JMOUNTING FACILITY SLOT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE MOUNTING FACILITY SLOT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CPTXJAC2.0*;CPTXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDRCE000*;MATT3AEEDRCE000$DPCAP00*;MATT3AEEDRCE000$$DPCAP00*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3HQO | BALLAST |
| Table 2 |
| Reply Code (MA01) | Reply |
| CUB000 | COPPER ALLOY |
| PBA000 | LEAD |
| PCA000 | PLASTIC |
| PCP000 | PLASTIC POLYAMIDE |
| PCAP00 | PLASTIC VINYL |
| RCE000 | RUBBER |
| RCAC00 | RUBBER NEOPRENE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information