An item designed for electronically regulating and controlling speed governors and volumetric flow regulators, injection pumps, turbochargers, the switching on and off and other operations as a function of engine speed and volumetric efficiency of the cylinders. Excludes:GOVERNOR (1), DIESEL ENGINE and GOVERNOR (1), GASOLINE ENGINE.

FSC Information

2990	Miscellaneous Engine Accessories, Nonaircraft
2995	Miscellaneous Engine Accessories, Aircraft

Colloquial Information

K4574	DETONATION CONTROL
K4573	FULL AUTHORITY DIGITAL ELECTRONIC CONTROL
K2252	ELECTRONIC CONTROL UNIT

Change List

MRC AFJK has been deleted

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED41975*)

MATT*DMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(MATT3CEPDCUA000*;MATT3CEPDCUA000$DPCW000*;MATT3CEPDCUA000$$DPCW000*)

Table 1
	ISAC Field Indicator (5000)	Location
	3CEP	CASE
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	ALB000	ALUMINUM ALLOY
	AL5052	ALUMINUM ALLOY 5052
	AL7075	ALUMINUM ALLOY 7075
	BND000	BRONZE
	BNAAAA	BRONZE CAST
	CLD000	CERAMIC
	CRA000	CHROMIUM
	CRB000	CHROMIUM ALLOY
	CUA000	COPPER
	CUB000	COPPER ALLOY
	CCA000	COTTON
	FBA000	FIBER
	FG0000	FIBERGLASS
	GSA000	GLASS
	GSB000	GLASS FIBER
	RBR000	HARD RUBBER
	FEA000	IRON
	FEB000	IRON CAST
	LRA000	LEATHER
	LRE000	LEATHER ARTIFICIAL
	MGB000	MAGNESIUM ALLOY
	AYA000	MICA
	NLA000	NICKEL
	NLB000	NICKEL ALLOY
	PPA000	PAPER
	PCA000	PLASTIC
	PCD000	PLASTIC ACRYLIC
	PCJ000	PLASTIC MELAMINE
	PCCB00	PLASTIC NYLON
	PCM000	PLASTIC PHENOL-FORMALDEHYDE
	PCN000	PLASTIC PHENOLIC
	PCP000	PLASTIC POLYAMIDE (NYLON)
	PCR000	PLASTIC POLYCARBONATE
	PCW000	PLASTIC POLYESTER
	PCX000	PLASTIC POLYETHYLENE
	PCAC00	PLASTIC POLYPROPYLENE
	PCAE00	PLASTIC POLYSULFONE
	PCAK00	PLASTIC SILICONE
	PCBC00	PLASTIC STYRENE
	CLB000	PORCELAIN
	STA000	STEEL
	ST0302	STEEL COMP 302
	ST0304	STEEL COMP 304
	ST0316	STEEL COMP 316
	STB000	STEEL CORROSION RESISTING
	AAA012	THERMOPLASTIC
	WDC000	WOOD
	WDL000	WOOD MAHOGANY
	WDR000	WOOD OAK
	WDE000	WOOD WALNUT
	ZNB000	ZINC
	ZNA000	ZINC ALLOY

ANYCBSYSTEM VOLTAGE RATING

THE ELECTRICAL VOLTAGE OF THE SYSTEM FOR WHICH THE ITEM IS DESIGNED.

Enter a reply with a minimum of one digit on either side of the decimal point.

(ANYCB2.0)

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

ANAD*DELECTRONIC DEVICE TYPE

INDICATES THE TYPE OF ELECTRONIC DEVICE USED FOR REGULATING THE ITEM.

Enter the applicable reply code from the table below

(ANADDAN*;ANADDAD$DAH*)

Table 1
	Reply Code (AG13)	Reply
	AD	ELECTRON TUBE
	AH	SOLID STATE
	AN	TRANSISTOR

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

ZZZV*GFSC APPLICATION DATA

THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.

Enter the name of the next higher classifiable assembly in clear text.

(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ENAC*DENVIRONMENTAL ATTRIBUTE CODE

INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.

Enter the applicable reply code from the table below

(ENACDG4*;ENACDAL$$DJG*)

Table 1
	Reply Code (EN02)	Reply
	AL	ASBESTOS ALTERNATIVE
	JG	ASBESTOS ALTERNATIVE PRODUCTS
	G4	COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS
	JE	LOW VOLATILE ORGANIC COMPOUND - COATINGS - METAL PARTS COATINGS
	AS	NON-MERCURY ALTERNATIVE
	K5	NON-MERCURY ALTERNATIVE - CONSUMER PRODUCTS - ELECTRICAL SWITCHES

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

ANYD*DSYSTEM GROUND POLARITY

INDICATES THE TYPE OF GROUND THE ELECTRICAL SYSTEM UTILIZES.

Enter the applicable reply code from the table below

(ANYDDN*;ANYDDP$DN*)

Table 1
	Reply Code (AK22)	Reply
	N	NEGATIVE
	P	POSITIVE

CYDTAENGINE MODEL NUMBER FOR WHICH DESIGNED

THE COMBINED GROUPS OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ENGINE FOR WHICH THE ITEM IS DESIGNED.

Enter the alpha-numeric reply with a minimum of one character.

(CYDTAS2)

CYDS*AENGINE DESIGN CONTROL ACTIVITY

THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY, INDUSTRIAL ORGANIZATION, OR OTHER ENTITY, WHICH CONTROLS THE DESIGN OF THE ENGINE.

Enter the alpha-numeric reply with five character(s) exactly.

(CYDSAH6T2S)

ELEC*BVOLTAGE IN VOLTS

THE TOTAL ELECTRICAL VOLTAGE.

Enter a reply with a minimum of one digit on either side of the decimal point.

(ELECB2.0*;ELECB2.0$$BM2.0*)

ANPK*JINPUT VOLTAGE RATING IN VOLTS

THE INPUT VOLTAGE RATING AT WHICH THE ITEM IS DESIGNED TO OPERATE,EXPRESSED IN VOLTS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ANPKJC2.0*;ANPKJC2.0$$JC2.1*)

Table 1
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ANPL*JINPUT FREQUENCY RATING IN HERTZ

THE CYCLES PER SECOND /HERTZ/ OF THE INPUT ALTERNATING CURRENT.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ANPLJB2.0*;ANPLJB2.0$$JB2.1*)

Table 1
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ANPN*DOUTPUT CURRENT TYPE

INDICATES THE TYPE OF OUTPUT CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.

Enter the applicable reply code from the table below

(ANPNDB*;ANPNDC$DC*;ANPNDC$$DC*)

Table 1
	Reply Code (AB62)	Reply
	B	AC
	C	DC

ANPP*JOUTPUT VOLTAGE RATING IN VOLTS

THE OUTPUT VOLTAGE RATING AT WHICH THE ITEM IS DESIGNED TO OPERATE,EXPRESSED IN VOLTS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ANPPJA2.0*;ANPPJA2.0$$JA2.1*)

Table 1
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ANPQ*JOUTPUT CURRENT RATING

THE TOTAL ELECTRICAL OUTPUT CURRENT.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ANPQJAC2.0*;ANPQJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AC30)	Reply
	A	AMPERES
	L	MILLIAMPERES

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ANPT*JPOWER RATING

THE AMOUNT OF ELECTRICAL ENERGY THAT CAN BE DISSIPATED.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ANPTJWC2.0*;ANPTJWC2.0$$JWC2.1*)

Table 1
	Reply Code (AC33)	Reply
	L	KILOWATTS
	M	MILLIWATTS
	W	WATTS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CYNAJSPEED RANGE RATED AT IDLE

THE RATED SPEED AT IDLE FOR WHICH THE ITEM HAS BEEN TESTED FOR PERFORMANCE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CYNAJM2.0*;CYNAJM2.0$JM2.0*;CYNAJM2.0$$JM2.1*)

Table 1
	Reply Code (AA34)	Reply
	K	KILOMETERS PER HOUR
	M	MILES PER HOUR
	R	REVOLUTIONS PER MINUTE

CYNBJSPEED RANGE RATING FULL LOAD

THE MINIMUM AND/OR MAXIMUM SPEED RANGE LIMITS/FULL LOAD FOR WHICH THE ITEM HAS BEEN TESTED FOR PERFORMANCE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CYNBJK2.0*;CYNBJK2.0$JK2.0*;CYNBJK2.0$$JK2.1*)

Table 1
	Reply Code (AA34)	Reply
	K	KILOMETERS PER HOUR
	M	MILES PER HOUR
	R	REVOLUTIONS PER MINUTE

ANYR*DCIRCUIT CONTROL DEVICE TYPE

INDICATES THE TYPE OF DEVICE USED TO CLOSE AND OPEN (BREAK) THE CIRCUIT.

Enter the applicable reply code from the table below

(ANYRDAAB*;ANYRDAAD$$DAAC*)

Table 1
	Reply Code (AK24)	Reply
	AAC	ACTUATING RELAY
	AAD	CIRCUIT BREAKER
	AAB	CUTOUT RELAY
	AAE	SWITCH

Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.

MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION

THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.

(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	Q	AEROSPACE MATERIAL SPEC STD
	J	AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP18)	Reply
	M	10TH MATERIAL RESPONSE
	N	11TH MATERIAL RESPONSE
	P	12TH MATERIAL RESPONSE
	Q	13TH MATERIAL RESPONSE
	R	14TH MATERIAL RESPONSE
	S	15TH MATERIAL RESPONSE
	T	16TH MATERIAL RESPONSE
	U	17TH MATERIAL RESPONSE
	W	18TH MATERIAL RESPONSE
	X	19TH MATERIAL RESPONSE
	B	1ST MATERIAL RESPONSE
	Y	20TH MATERIAL RESPONSE
	Z	21ST MATERIAL RESPONSE
	V	22ND MATERIAL RESPONSE
	C	2ND MATERIAL RESPONSE
	D	3RD MATERIAL RESPONSE
	E	4TH MATERIAL RESPONSE
	F	5TH MATERIAL RESPONSE
	H	6TH MATERIAL RESPONSE
	J	7TH MATERIAL RESPONSE
	K	8TH MATERIAL RESPONSE
	L	9TH MATERIAL RESPONSE
	G	ALL MATERIAL RESPONSES
	A	SINGLE MATERIAL RESPONSE

SFTT*DSURFACE TREATMENT

THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.

Enter the applicable reply code from the table below

(SFTTDENA000*;SFTTDCMA000$DCUA000*;SFTTDCMA000$$DCUA000*)

Table 1
	Reply Code (SF01)	Reply
	ANA000	ANODIZE
	XXG000	BLACK OXIDE
	CDA000	CADMIUM
	CMA000	CHROMATE
	CUA000	COPPER
	ENA000	ENAMEL
	XXA000	OXIDE FILM
	PNA000	PAINT
	PRC000	PRIMER ZINC CHROMATE
	AGA000	SILVER
	ZNA000	ZINC

STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION

THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.

(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP39)	Reply
	M	10TH TREATMENT RESPONSE
	N	11TH TREATMENT RESPONSE
	P	12TH TREATMENT RESPONSE
	Q	13TH TREATMENT RESPONSE
	R	14TH TREATMENT RESPONSE
	S	15TH TREATMENT RESPONSE
	B	1ST TREATMENT RESPONSE
	C	2ND TREATMENT RESPONSE
	D	3RD TREATMENT RESPONSE
	E	4TH TREATMENT RESPONSE
	F	5TH TREATMENT RESPONSE
	H	6TH TREATMENT RESPONSE
	J	7TH TREATMENT RESPONSE
	K	8TH TREATMENT RESPONSE
	L	9TH TREATMENT RESPONSE
	G	ALL TREATMENT RESPONSES
	A	SINGLE TREATMENT RESPONSE

ADZC*DENVIRONMENTAL PROTECTION

THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.

Enter the applicable reply code from the table below

(ADZCDGE*;ADZCDBX$$DGK*)

Table 1
	Reply Code (AA65)	Reply
	GK	CORROSION RESISTANT
	GP	FUNGUS RESISTANT
	GE	HERMETICALLY SEALED
	CK	SUBMERSIBLE
	BX	WATERTIGHT

ABHP*JOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABKW*JOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJLA2.0*;ABKWJLA2.0$$JLA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABMK*JOVERALL WIDTH

AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMKJAC2.0*;ABMKJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABTB*JMOUNTING HOLE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABTBJAC2.0*;ABTBJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABTD*JMOUNTING SLOT WIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING SLOT,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABTDJAC2.0*;ABTDJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ABVG*JMOUNTING SLOT LENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF THE MOUNTING SLOT,IN DISTINCTION FROM WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABVGJAC2.0*;ABVGJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ACUNDMOUNTING METHOD

THE MEANS OF ATTACHING THE ITEM. THIS MRC IS BEING DISCONTINUED. PLEASE USE MRC AXGY IF AVAILABLE.

Enter the applicable reply code from the table below

(ACUNDAHQ*;ACUNDACP$DAJD*;ACUNDACP$$DAJD*)

Table 1
	Reply Code (AB89)	Reply
	AHW	ADJUSTABLE LATCH
	AJZ	ANCHOR NUT
	AFU	BASE
	AAN	BOLT
	ACH	BRACKET
	AHL	CAM LOCK
	AAU	CAPTIVE FASTENERS
	AGF	CHASSIS
	AHM	CLAMP
	AAP	CLIP
	AHN	CONNECTOR PLUG
	AAV	CONNECTOR W/HOLD DOWN BRACKET
	ABU	D-RING
	AJD	FASTENER
	ADA	FLANGE
	AGA	FRICTION
	AFV	HOLES
	ABV	HUB INSERT
	AJC	LATCH PLATE
	ADF	PANEL
	ALW	PIN
	AAX	PLUG-IN
	ACU	RACK
	ACJ	SCREW
	ADJ	SET SCREW
	AFS	SLIDE
	ACP	SLOT
	AHT	SNAP SPRING LOCK
	ACV	SNAPSLIDE
	AHS	SOCKET
	ADM	STUD
	ABC	TERMINAL
	AFA	THREADED HOLE
	ACF	THREADED STUD
	AJB	TURNLOCK FASTENER
	AJA	TURNLOCK FASTENER STUD
	ADQ	TWIST LOCK
	ACT	UNTHREADED HOLE
	AHQ	WING NUT
	AHX	WIRE LEAD

IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (APAS and APBE and APBC)

IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (APAQ and APBB and ABTD and APAR and APBH and APBJ and APBC)

IF STYLE/REPLY CODE(s) 9 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (APBB and ABTD and ABVG and APAS and APBG and APBC)

IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (ABVG and ABTD and APAS and APBE and APBF and APBC)

IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (APAS and ABTB and APBA and APBD and APBE and APBC)

IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (APAX and THDS)

IF STYLE/REPLY CODE(s) 5 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (ABTD and ABVG and ABTB and ADNY)

IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (ADNZ and ADNY and ABTB)

IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (AFDT and ABTB and AFDS and APAP)

IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (ABTB and ADNZ)

IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ADER, YOU MUST ANSWER MRC (ADNY and ABTB)

ADERLMOUNTING STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE MOUNTING.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(ADERL7)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAJ1099	1	TWO HOLE
AAJ1108	10	SIX SLOTTED HOLES
AAJ1109	11	TWO OPEN SLOTS ON A RADIUS
AAJ1100	2	THREE HOLE TRIANGULAR
AAJ1101	3	FOUR HOLE TRAPEZOID
AAJ1102	4	FOUR HOLE RECTANGULAR
AAJ1103	5	TWO PLAIN HOLES TWO SLOTTED HOLES
AAJ1104	6	THREE STUD TRIANGULAR
AAJ1105	7	FOUR HOLES TWO OPEN SLOTS ON A RADIUS
AAJ1106	8	TWO SLOTTED HOLES, TWO OPEN SLOTS ON A RADIUS
AAJ1107	9	THREE SLOTTED HOLES, THREE OPEN SLOTS ON A RADIUS

Table 1
	Reply Code (AM81)	Reply
	AM	DEHUMIDIFIED WAREHOUSE
	AN	HEATED WAREHOUSE
	AG	IMPROVED OPEN
	AR	SHED
	AJ	UNHEATED WAREHOUSE
	AK	UNIMPROVED OPEN

Table 1
	Reply Code (AN47)	Reply
	BDR	ARC QUENCHING
	BDQ	COIL VOLTAGE SUPPRESSION
	CNL	COLOR CODED TERMINAL
	BKR	ELECTRICALLY INSULATED
	BSZ	ELECTROSTATIC SENSITIVE
	ADP	INTERNALLY GROUNDED
	ADR	METAL WEIGHTS
	CMC	METALLIC INCLOSURE
	AAJ	MOUNTING HARDWARE
	BPP	NOISE DAMPENED
	BCE	RADIATION TOLERANT
	AGQ	RFI SHIELDING
	FNY	ROHS DIRECTIVE COMPLIANCE
	BPQ	SHOCK DAMPENED
	ADF	THERMAL OVERLOAD PROTECTION
	BPR	W/BOOT
	BPX	W/SET SCREW

Table 1
	Reply Code (AN73)	Reply
	XNE	AXIALLY AT ONE END
	BAK	BACK
	BTM	BOTTOM
	BAE	BOTTOM AT ONE END
	SYD	SIDE
	TPE	TOP

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

Table 2
	Reply Code (AG14)	Reply
	E	GRAINS, TROY
	R	GRAMS
	F	OUNCES, TROY

Table 1
	Reply Code (AH06)	Reply
	SM	ISO M
	SS	ISO S
	NN	NONSTANDARD
	UN	UN
	NC	UNC
	NE	UNEF
	NF	UNF
	NM	UNM
	NS	UNS

Table 1
	Reply Code (AN89)	Reply
	ACN	CONNECTOR, PLUG
	ABV	HOOK
	ABU	MALE PLUG
	AAM	PIN
	AFH	PLUG
	AMS	PORCELAIN BUSHING
	AKA	SCREW STUD
	AFF	SOLDER LUG
	AAS	SOLDER STUD
	AGR	STANDOFF INSULATOR
	AAY	STANDOFF, THREADED STUD
	AJA	STUD
	AMM	WIRE PIGTAIL