A circuit designed to store information and/or coded instructions. Item has pins or other connections to install in a computer or computing device. Does not include magnetic drums, tapes, punched cards or the like. For items that have portable type connections see MEMORY, PORTABLE, SOLID STATE.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED41015*)
CQWX*DOUTPUT LOGIC FORM
AN INDICATION OF THE BASIC ELECTRONIC CIRCUIT ELEMENTS ASSEMBLED TO OUTPUT A LOGIC FUNCTION.
Enter the applicable reply code from the table below
(CQWXDBP*;CQWXDBA$$DBN*)
| Table 1 |
| Reply Code (AP42) | Reply |
| BT | BIPOLAR METAL-OXIDE SEMICONDUCTOR |
| AB | CAPACITOR-DIODE LOGIC |
| AD | CAPACITOR-TRANSISTOR LOGIC |
| BG | COMPATIBLE-CURRENT-SINKING LOGIC |
| BW | COMPLEMENTARY TRANSISTOR LOGIC |
| BK | COMPLEMENTARY-LOGIC |
| AW | COMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC |
| BF | COMPLEMENTARY-OXIDIZED-SILICON LOGIC |
| AG | CORE TRANSISTOR LOGIC |
| AX | CURRENT INJECTION LOGIC |
| BL | CURRENT-MODE LOGIC |
| AE | DIODE LOGIC |
| BM | DIODE-TRANSISTOR LOGIC |
| BN | DIRECT-COUPLED-TRANSISTOR LOGIC |
| AY | DOUBLE DIFFUSED-METAL OXIDE-SEMICONDUCTOR LOGIC |
| BP | EMITTER-COUPLED LOGIC |
| BV | HI-PERFORMANCE MOS |
| AZ | INTEGRATED-INJECTION LOGIC |
| BA | INTEGRATED-INTEGRATED-INJECTION LOGIC |
| BJ | LOCAL OXIDATION COMPLEMENTARY - METAL OXIDE - SEMICONDUCTOR LOGIC |
| AT | METAL OXIDE-SEMICONDUCTOR LOGIC |
| BU | METAL-NITRIDE-OXIDE SEMICONDUCTOR |
| BB | N-TYPE METAL OXIDE-SEMICONDUCTOR LOGIC |
| BC | P-TYPE METAL OXIDE-SEMICONDUCTOR LOGIC |
| BQ | RESISTOR-CAPACITOR-TRANSISTOR LOGIC |
| AK | RESISTOR-DIODE LOGIC |
| BR | RESISTOR-TRANSISTOR LOGIC |
| BD | TRANSISTOR COUPLED LOGIC |
| BE | TRANSISTOR-DIODE-RESISTOR LOGIC |
| BS | TRANSISTOR-TRANSISTOR LOGIC |
| AM | VARIABLE THRESHOLD LOGIC |
CQZP*DINPUT CIRCUIT PATTERN
THE ARRANGEMENT OR PATTERN WHICH DESCRIBES THE INPUT CIRCUITRY OF THE ITEM.
Enter the applicable reply code from the table below
(CQZPDBT*;CQZPDDG$$DCW*)
| Table 1 |
| Reply Code (AP44) | Reply |
| DL | 1 CHANNEL |
| AB | 1 INPUT |
| DM | 1 STAGE |
| EC | 10 CHANNEL |
| BN | 10 INPUT |
| ED | 10 STAGE |
| BP | 11 INPUT |
| EG | 12 CHANNEL |
| BQ | 12 INPUT |
| BR | 12 STAGE |
| EH | 13 CHANNEL |
| BS | 13 INPUT |
| EK | 14 CHANNEL |
| BT | 14 INPUT |
| BW | 14 STAGE |
| BX | 15 INPUT |
| BY | 16 CHANNEL |
| BZ | 16 INPUT |
| EM | 16 STAGE |
| EN | 17 CHANNEL |
| EP | 17 INPUT |
| EQ | 17 STAGE |
| ES | 18 INPUT |
| CA | 18 STAGE |
| ET | 19 INPUT |
| AC | 2 CHANNEL |
| AD | 2 INPUT |
| AE | 2 OF 8 CHANNEL |
| DN | 2 STAGE |
| AF | 2 WIDE 2 INPUT |
| AG | 2 WIDE 3 INPUT |
| AH | 2 WIDE 4 INPUT |
| EW | 20 INPUT |
| EX | 21 INPUT |
| EY | 22 INPUT |
| EZ | 23 INPUT |
| FA | 24 INPUT |
| FB | 25 INPUT |
| FC | 26 INPUT |
| FD | 27 INPUT |
| FE | 28 INPUT |
| FF | 29 INPUT |
| AJ | 3 CHANNEL |
| AK | 3 INPUT |
| DP | 3 STAGE |
| DQ | 3 WIDE 2-3-3 INPUT |
| AL | 3 WIDE 3 INPUT |
| FG | 30 INPUT |
| FH | 31 INPUT |
| FJ | 32 INPUT |
| FK | 33 INPUT |
| FL | 34 INPUT |
| FM | 35 INPUT |
| FN | 36 INPUT |
| FP | 37 INPUT |
| FQ | 38 INPUT |
| FR | 39 INPUT |
| AM | 4 CHANNEL |
| AN | 4 INPUT |
| AP | 4 STAGE |
| AQ | 4 WIDE |
| AR | 4 WIDE 2 INPUT |
| AS | 4 WIDE 2-2-2-3 INPUT |
| AT | 4 WIDE 2-2-3-2 INPUT |
| AW | 4 WIDE 2-3-3-2 INPUT |
| AX | 4 WIDE 3-2-2-3 INPUT |
| AY | 4 WIDE 3-3-2-3 INPUT |
| DS | 4 WIDE 4 INPUT |
| AZ | 4 WIDE 4-2-3-2 INPUT |
| BA | 4 WIDE 4-3-3-3 INPUT |
| FS | 40 INPUT |
| FT | 41 INPUT |
| FW | 42 INPUT |
| FX | 43 INPUT |
| FY | 44 INPUT |
| FZ | 45 INPUT |
| GC | 48 INPUT |
| GD | 49 INPUT |
| BB | 5 CHANNEL |
| BC | 5 INPUT |
| BD | 5 STAGE |
| GE | 50 INPUT |
| GF | 51 INPUT |
| GK | 55 INPUT |
| BE | 6 CHANNEL |
| BF | 6 INPUT |
| DX | 6 STAGE |
| DY | 6 WIDE 1 INPUT |
| GQ | 60 INPUT |
| GS | 62 INPUT |
| GW | 64 INPUT |
| DZ | 7 CHANNEL |
| BG | 7 INPUT |
| BH | 7 STAGE |
| BJ | 8 CHANNEL |
| BK | 8 INPUT |
| BL | 8 STAGE |
| EA | 9 CHANNEL |
| BM | 9 INPUT |
| EB | 9 STAGE |
| JG | DUAL 1 CHANNEL |
| CC | DUAL 1 INPUT |
| KE | DUAL 10 INPUT |
| KK | DUAL 12 CHANNEL |
| KL | DUAL 12 INPUT |
| KP | DUAL 13 INPUT |
| CT | DUAL 14 CHANNEL |
| KS | DUAL 14 STAGE |
| KW | DUAL 15 INPUT |
| KY | DUAL 16 CHANNEL |
| KZ | DUAL 16 INPUT |
| JJ | DUAL 2 CHANNEL |
| CD | DUAL 2 INPUT |
| CE | DUAL 2 WIDE 2 INPUT |
| CF | DUAL 2 WIDE 2-3 INPUT |
| CG | DUAL 2 WIDE 3 INPUT |
| LB | DUAL 2 WIDE 4 INPUT |
| LC | DUAL 2 WIDE 4-2 INPUT |
| CH | DUAL 3 INPUT |
| CJ | DUAL 3-2 INPUT |
| CK | DUAL 3-4 INPUT |
| LF | DUAL 3-5 INPUT |
| CL | DUAL 4 INPUT |
| CP | DUAL 4 STAGE |
| LG | DUAL 4 WIDE 4 INPUT |
| LH | DUAL 4-2 INPUT |
| CM | DUAL 4-3 INPUT |
| CN | DUAL 4-5 INPUT |
| CQ | DUAL 5 INPUT |
| JQ | DUAL 6 CHANNEL |
| CS | DUAL 6 INPUT |
| JT | DUAL 7 INPUT |
| JY | DUAL 8 INPUT |
| KB | DUAL 9 INPUT |
| CW | HEX 1 INPUT |
| LL | HEX 2 INPUT |
| LM | HEX 3 INPUT |
| LN | HEX 4 INPUT |
| LP | HEX 5 INPUT |
| LQ | HEX 6 INPUT |
| LT | OCTAL 1 INPUT |
| LW | OCTAL 2 INPUT |
| LX | OCTAL 3 INPUT |
| LY | OCTAL 4 INPUT |
| NF | OVER 95 INPUT |
| CX | QUAD 1 INPUT |
| CY | QUAD 2 INPUT |
| MA | QUAD 2 WIDE 2 INPUT |
| CZ | QUAD 2-2-2-3 INPUT |
| DA | QUAD 2-2-2-4 INPUT |
| MC | QUAD 3 INPUT |
| DB | QUAD 3-2-2-3 INPUT |
| ME | QUAD 3-2-3-2 INPUT |
| MF | QUAD 4 INPUT |
| NC | QUAD 4-2-2-2 INPUT |
| DE | QUAD 4-3-3-2 INPUT |
| MG | QUAD 5 INPUT |
| DF | TRIPLE 1 INPUT |
| DG | TRIPLE 2 INPUT |
| DH | TRIPLE 2-3-2 INPUT |
| DJ | TRIPLE 3 INPUT |
| MM | TRIPLE 4 INPUT |
| DK | TRIPLE 4-3-3 INPUT |
| MN | TRIPLE 4-3-4 INPUT |
| MP | TRIPLE 5 INPUT |
CZEN*JVOLTAGE RATING AND TYPE PER CHARACTERISTIC
THE VALUE OF THE VOLTAGE APPLIED AND TYPE OF SPECIFIC ELECTRICAL CHARACTERISTIC FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZENJVBABB2.0*;CZENJVBABB2.0$$JVBABB2.1*)
| Table 1 |
| Reply Code (AB63) | Reply |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AP75) | Reply |
| AAF | ABSOLUTE INPUT |
| AAG | ABSOLUTE OUTPUT |
| AAC | ACC SENSITIVITY |
| AAB | ACC/PAC DETECTOR TINT CONTROL |
| AAD | AF OUTPUT |
| AAE | AGC THRESHOLD |
| AAH | APPLIED |
| AAJ | AUDIO OUTPUT FREQUENCY |
| AAK | CHANGE |
| AAL | CHROMA GAIN |
| AAM | CHROMA INPUT SENSITIVITY |
| AAN | COMMON MODE INPUT FIRING |
| AAP | DETECTOR OUTPUT |
| AAQ | DRAIN SOURCE |
| AAR | EFFECTIVE NOISE |
| AAS | ERROR |
| AAT | FORWARD |
| AAU | HIGH INPUT LOGIC LEVEL THREE STATE |
| AAV | HIGH INPUT THRESHOLD |
| AAW | HIGH LEVEL OUTPUT |
| AAX | HIGH OUTPUT OPEN COLLECTOR/DRAIN |
| AAY | HIGH RECEIVER INPUT THRESHOLD |
| AAZ | HIGH TYPICAL OUTPUT |
| ABA | HYSTERSIS |
| ABB | IF IN THRESHOLD |
| ABC | INPUT |
| ABD | INPUT CLAMP |
| ABE | INPUT LINE |
| ABG | INPUT LOGIC 0 |
| ABH | INPUT LOGIC 1 |
| ABF | INPUT LOGIC LEVEL |
| ABJ | INPUT LOW CONTROL LOGIC THRESHOLD |
| ABK | INPUT OFFSET OVER OPERATING TEMP |
| ABL | INPUT VIDEO |
| ABM | INPUT/OUTPUT DIFFERENTIAL |
| ABN | INSTANTANEOUS REVERSE |
| ABP | INVERSE |
| ABQ | ISOLATION |
| ABR | LINE REGULATOR CHANGE |
| ABS | LOW INPUT LOGIC LEVEL THREE STATE |
| ABT | LOW INPUT OPEN COLLECTOR/DRAIN |
| ABU | LOW INPUT THRESHOLD |
| ABV | LOW LEVEL OUTPUT |
| ABW | LOW RECEIVER INPUT THRESHOLD |
| ABX | LOW TYPICAL OUTPUT |
| ABY | MINIMUM SINK CURRENT |
| ABZ | MIXER |
| ACA | MODE CONTROL |
| ACB | MULTIPLEX INPUT SIGNAL |
| ACC | NEGATIVE OUTPUT |
| ACD | NEGATIVE POWER SUPPLY SPAN |
| ACE | NOISE |
| ACF | NOISE IMMUNITY |
| ACG | ON RESISTANCE |
| ACH | OUTPUT |
| ACJ | OUTPUT COLLECTOR |
| ACK | OUTPUT HIGH CONTROL LOGIC THRESHOLD |
| ACL | OUTPUT LOGIC HIGH |
| ACM | OUTPUT LOGIC LOW |
| ACN | OUTPUT MATRIX |
| ACP | OUTPUT ON |
| ACQ | OUTPUT VIDEO |
| ACR | PAC IDENTIFICATION OUTPUT |
| ACS | PAC/SECAM |
| ACT | POSITIVE OUTPUT |
| ACU | POSITIVE POWER SUPPLY SPAN |
| ACV | POWER SOURCE |
| ACW | PROGRAM |
| ACX | PROTECTOR |
| ACY | PULSE MODE SENSE |
| ACZ | REFERENCE |
| ADA | RIPPLE |
| ADB | SENSE |
| ADC | SENSE IN THRESHOLD |
| ADD | SHUNT REGULATOR |
| ADE | SINK OUTPUT HIGH |
| ADF | STABILIZED |
| ADG | SWING |
| ADH | SWITCHING |
| ADJ | SYNC |
| ADK | TEMP STABILIZING |
| ADL | THRESHOLD LEVEL |
| ADM | TOTAL |
| ADN | TOTAL SUPPLY |
| ADP | TUNER |
| ADQ | ZERO SIGNAL |
Reference NotesFor negative voltages, precede the numeric portion of the reply with the letter “M”.(CZENJVAABCM3.0*; CZENJVBABCM4.0$$JVCABC2.0*)
CTQX*JCURRENT RATING PER CHARACTERISTIC
THE LEVEL OF ELECTRICAL FLOW AND THE SYMBOL USED TO IDENTIFY THE SPECIFIC ELECTRICAL CHARACTERISTIC.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CTQXJBACFQ2.0*;CTQXJBACFQ2.0$$JBACFQ2.1*)
| Table 1 |
| Reply Code (AB49) | Reply |
| AA | AMPERES |
| CK | MICROAMPERES |
| BA | MILLIAMPERES |
| HT | NANOAMPERES |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AH16) | Reply |
| FP | ABSOLUTE COLLECTOR |
| FQ | ABSOLUTE HIGH OUTPUT |
| FR | ABSOLUTE LOW OUTPUT |
| FS | ABSOLUTE OUTPUT |
| FT | ABSOLUTE OUTPUT TRANSISTOR |
| FU | ABSOLUTE SWITCHING |
| FV | APPLIED |
| FW | AUDIO |
| FX | BIAS |
| FY | BIAS OVER OPERATING TEMP |
| FZ | COLLECTOR |
| GA | DRAIN/SOURCE ON RESISTIVE |
| GB | DRIVER SINK |
| GC | FIRING |
| GD | FORWARD |
| GE | FORWARD CURRENT AT MAXIMUM FORWARD VOLTAGE |
| GF | HOLD |
| HU | INPUT |
| GG | INPUT BIAS CURRENT OVER OPERATING TEMP RANGE |
| GH | INPUT DRIVE |
| GJ | INPUT OFFSET CURRENT OVER OPERATING TEMP RANGE |
| GK | INPUT RECEIVER |
| FB | LIMITING CURRENT |
| GL | LINE |
| GM | LOAD |
| GN | LOAD CAPABILITY |
| GP | LOW INPUT |
| GQ | MIXER |
| GR | MOTOR |
| GS | OFF STATE |
| GT | ON STATE |
| GU | OPEN COLLECTOR/DRAIN HIGH LOGIC OUTPUT LEVEL |
| GV | OPEN COLLECTOR/DRAIN LOW LOGIC OUTPUT LEVEL |
| GW | OSCILLATION |
| GX | OUTPUT |
| GY | OUTPUT ABSOLUTE MAXIMUM TRANSISTOR |
| GZ | OUTPUT DRIVE |
| HA | OUTPUT SINK |
| HB | RECEIVER INPUT THRESHOLD |
| HC | REGULATOR |
| HD | STABILIZING |
| HE | STAND-BY |
| HF | STROBE |
| HG | SUPPLY |
| HH | SURGE |
| HJ | SWITCH |
| HK | TOTAL SUPPLY |
| HL | TRANSITION TIME LOW TO HIGH LEVEL OUTPUT |
| HM | TRIP |
| HN | TUNER |
| HP | VIDEO |
| HQ | W/O BOAST |
| HR | ZERO |
CZEP*JCAPITANCE RATING PER CHARACTERISTIC
THE RELATIVE LEVEL OF THE QUANTITY OF ELECTRICAL CHARGE AT A GIVEN POTENTIAL WHICH THE ITEM IS RECEIVING AND STORING PER CHARACTERISTIC.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZEPJBLFA2.0*;CZEPJBLFA2.0$$JBLFA2.1*)
| Table 1 |
| Reply Code (AC00) | Reply |
| B | INPUT |
| F | OUTPUT |
| Table 2 |
| Reply Code (AN86) | Reply |
| UF | MICROFARADS |
| LF | MILLIFARADS |
| NF | NANOFARADS |
| PF | PICOFARADS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CZEQ*JTIME RATING PER CHACTERISTIC
THE ACCEPTABLE TIME LIMITATION FOR THE ITEM PER CHARACTERISTIC.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CZEQJNSBAER2.0*;CZEQJNSBAER2.0$$JNSBAER2.1*)
| Table 1 |
| Reply Code (AH68) | Reply |
| AH | MICROSECONDS |
| AJ | MILLISECONDS |
| NS | NANOSECONDS |
| SC | SECONDS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AP75) | Reply |
| ADR | ACCESS |
| ADS | CONVERSION |
| ADT | DELAY |
| ADU | DELAY TRANSIENT |
| ADV | FALL |
| ABC | INPUT |
| ADW | INPUT TO OUTPUT ACCESS |
| ADX | INTERNAL NOISE LOCKOUT |
| ADY | KEY BOUNCE DELAY |
| ADZ | OFF |
| AEA | ON |
| ACH | OUTPUT |
| AEB | OUTPUT PULSE DURATION |
| AEC | PROPAGATION DELAY |
| AED | PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT |
| AEE | PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT |
| AEF | PULSE DURATION |
| AEG | READ-WRITE CYCLE |
| AEH | RECOVERY |
| AEJ | RESPONSE |
| AEK | REVERSE RECOVERY |
| AEL | RISE TRANSIENT |
| AEM | SEARCH |
| AEN | SETTLING |
| AEP | SUM OF WRITE-PULSE WIDTH AND WRITE-PULSE DELAY |
| AEQ | TRANSFER |
| AER | TRANSIENT RECOVERY CHANGE |
| AES | TRANSIENT RECOVERY LOAD CHANGE |
| AET | WRITE-CYCLE WIDTH |
IF STYLE/REPLY CODE(s) DHU, DHV, DHW, DHX, DHY, DHZ, DJA, DJB, DJC, DJD, DJE, AWF OR AWG WERE ENTERED FOR MRC CZER, YOU MUST ANSWER MRC (CZZZ)
IF STYLE/REPLY CODE(s) EAL WERE ENTERED FOR MRC CZER, YOU MUST NOT ANSWER MRC (CZZZ)
CZERDMEMORY DEVICE TYPE
INDICATES THE TYPE OF MEMORY DEVICE USED ON THE ITEM.
Enter the applicable reply code from the table below
(CZERDDHW)
| Table 1 |
| Reply Code (AN47) | Reply |
| DHU | CAM |
| DHV | CROM |
| DHW | DIODE MATRIX |
| DHX | EAROM |
| DHY | EEPROM |
| DHZ | EPROM |
| DJA | FIRST-IN FIRST-OUT |
| EAL | PAL |
| AWF | PROGRAMMABLE |
| AWG | PROGRAMMED |
| DJB | PROM |
| DJC | RAM |
| DJD | ROM |
| DJE | SCRATCH PAD |
CZZZAMEMORY CAPACITY
THE AMOUNT OF SPACE AVAILABLE FOR STORAGE OF INFORMATION.
Enter the alpha-numeric reply with a minimum of one character.
(CZZZAV8)
CSWJ*AWORD QUANTITY
THE NUMBER OF WORDS,CONSISTING OF ONE OR MORE BITS,FOR WHICH THE ITEM IS DESIGNED.
Enter the numeric reply with a minimum of one digit.
(CSWJA10*)
CRHL*ABIT QUANTITY
THE NUMBER OF BINARY DIGITS THE ITEM CAN GENERATE,PROCESS OR STORE.
Enter the numeric reply with a minimum of one digit.
(CRHLA10*)
AFGAJOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJCM32.0/P50.0*;AFGAJCM32.0/P50.0$$JC*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
TTQYJTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TTQYJAMT2*;TTQYJAMT2$$JAMT3*;TTQYJAMT2$JAMT2*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AVG | BALL |
| AKH | BEAM LEAD |
| AAD | BONDING PAD |
| AFX | CASE |
| AMT | FLAT LEADS |
| AMF | GULLWING |
| AMG | J-HOOK |
| AMH | LEADLESS |
| AAM | PIN |
| ACR | PRINTED CIRCUIT |
| ACC | WIRE LEAD |
CWSG*DTERMINAL SURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED. THE TREATMENT IS DESIGNED TO PROTECT THE TERMINAL SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(CWSGDAGA000*;CWSGDNLA000$DAUA000*;CWSGDNLA000$$DAUA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| AUA000 | GOLD |
| NLA000 | NICKEL |
| AGA000 | SILVER |
| SRA000 | SOLDER |
| SNA000 | TIN |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CQSZDINCLOSURE CONFIGURATION
INDICATES THE PHYSICAL CONFIGURATION OF THE INCLOSURE.
Enter the applicable reply code from the table below
(CQSZDCZ)
| Table 1 |
| Reply Code (AG85) | Reply |
| DD | AXIAL QUAD ARRAY |
| CV | BALL GRID ARRAY |
| CZ | BEAM CHIP |
| CS | CAN |
| CT | DUAL-IN-LINE |
| CW | FLAT PACK |
| DE | LEADED CHIP CARRIER |
| DA | LEADLESS FLAT PACK |
| DF | PIN GRID ARRAY |
| DB | QUAD-IN-LINE |
| CX | SINGLE-IN-LINE |
CQSJ*DINCLOSURE MATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE INCLOSURE IS FABRICATED.
Enter the applicable reply code from the table below
(CQSJDPCA000*;CQSJDCLD000$DRSD000*;CQSJDCLD000$$DRSD000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| CLD000 | CERAMIC |
| GSA000 | GLASS |
| MTC000 | METAL |
| XXA000 | OXIDE |
| PCA000 | PLASTIC |
| RSD000 | RESIN |
| SLC000 | SILICON |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
CTFT*JCASE OUTLINE SOURCE AND DESIGNATOR
THE ALPHA-NUMERIC DESIGNATION,ASSIGNED BY THE CONTROLLING AGENCY,BY WHICH THE OUTLINE OF THE CASE IS IDENTIFIED.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CTFTJDA2.0*;CTFTJDA2.0$JDA2.1*)
| Table 1 |
| Reply Code (AF94) | Reply |
| DL | ASC379 |
| DA | BS 3934 |
| DC | BS 9400 |
| CY | JOINT ELECTRON DEVICE ENGINEERING COUNCIL |
| DY | MIL-H-38534 |
| CZ | MIL-M-38510 |
| DK | PRO ELECTRON |
| DJ | UTE C96-020 |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CZES*DHYBRID TECHNOLOGY TYPE
INDICATES THE TYPE OF HYBRID TECHNOLOGY USED IN THE ITEM.
Enter the applicable reply code from the table below
(CZESDAAK*;CZESDAAX$$DAAW*)
| Table 1 |
| Reply Code (AJ21) | Reply |
| AAK | FILM |
| AAX | MONOLITHIC |
| AAW | MULTICHIP |
ADAQ*JBODY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE BODY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAQJLA2.0*;ADAQJLA2.0$$JLA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAR*JBODY OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADARJAC2.0*;ADARJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAU*JBODY HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE BODY,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAUJAA2.0*;ADAUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAT*JBODY WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE BODY,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADATJAB2.0*;ADATJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEHX*JMAXIMUM POWER DISSIPATION RATING
THE MAXIMUM AMOUNT OF ELECTRICAL ENERGY THAT CAN BE EXPENDED BY AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEHXJM2.0*)
| Table 1 |
| Reply Code (AC33) | Reply |
| M | MILLIWATTS |
| W | WATTS |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJKM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
| K | KELVIN |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBYQ*;CBBLDBXP$$DATT*)
| Table 1 |
| Reply Code (AN47) | Reply |
| ASK | 1-PHASE |
| ASL | 2-PHASE |
| ASM | 2-STATE OUTPUT |
| ASN | 3-STATE OUTPUT |
| ASP | AC COUPLED |
| ASQ | ADJUSTABLE |
| ASR | ASYNCHRONOUS |
| BSC | AXIS CROSSOVER |
| BAG | BALANCED |
| BSD | BEAM LEAD CHIP |
| AST | BIDIRECTIONAL |
| ASW | BIPOLAR |
| BSE | BISTABLE |
| BSF | BUFFERED RESET |
| BSG | BURN IN |
| BSH | BURN IN, MIL-STD-883, CLASS A |
| BSJ | BURN IN, MIL-STD-883, CLASS B |
| BSK | BURN IN, MIL-STD-883, CLASS C |
| BSL | BURN IN, MIL-STD-883, CLASS D |
| BAH | CASCADABLE |
| BSM | COMPATIBLE CMOS |
| BSN | COMPATIBLE DTL |
| BSP | COMPATIBLE RTL |
| ASX | COMPLEMENTARY OUTPUTS |
| BSQ | DARLINGTON OUTPUTS |
| ASY | DARLINGTON-CONNECTED |
| ASZ | DC COUPLED |
| ATA | DELAY, D-TYPE |
| BSR | DIELECTRIC ISOLATED |
| BSS | DIRECT COUPLED |
| BST | DOUBLE BALANCED |
| ATB | DUAL EDGE TRIGGERED |
| BSW | DUAL NEGATIVE EDGE TRIGGERED |
| BSX | DUAL POSITIVE EDGE TRIGGERED |
| ATC | DYNAMIC |
| ATD | EDGE TRIGGERED |
| BSY | ELECTRICALLY ALTERABLE |
| BSZ | ELECTROSTATIC SENSITIVE |
| BTA | ERASABLE |
| ATE | EXPANDABLE |
| ATF | EXTERNALLY COMPENSATED |
| BTB | FAIL SAFE PRECONDITIONED |
| ATG | FAST CARRY |
| BTC | FAST SETTLING |
| ATH | FIXED |
| BTD | FIXED GAIN |
| BTE | FIXED MASK |
| BTF | FREQUENCY COMPENSATED |
| BTG | GAIN CONTROLLED |
| ATJ | GATED OUTPUT |
| ASG | HERMETICALLY SEALED |
| ATK | HIGH CURRENT |
| BTH | HIGH FAN-OUT |
| BTJ | HIGH FREQUENCY |
| ATL | HIGH GAIN |
| BTK | HIGH IMPEDANCE |
| BTL | HIGH NOISE |
| BTM | HIGH PERFORMANCE |
| ATM | HIGH POWER |
| BTN | HIGH PRECISION |
| BTP | HIGH RELIABILITY |
| BTQ | HIGH SENSITIVITY |
| BAP | HIGH SLEW RATE |
| ATN | HIGH SPEED |
| BTR | HIGH STABILITY |
| ATP | HIGH VOLTAGE |
| ATQ | HYBRID |
| ATR | INTERNALLY COMPENSATED |
| BTS | INTERNALLY TRIMMED |
| BTT | INVERTED OUTPUT |
| BTW | LASER TRIMMED |
| BTX | LOW BIAS |
| BTY | LOW CURRENT |
| BTZ | LOW DRIFT |
| BWA | LOW IMPEDANCE |
| ATS | LOW LEVEL |
| BAS | LOW NOISE |
| ATT | LOW POWER |
| BWB | LOW VOLTAGE |
| BWC | MACROLOGIC |
| BWD | MEDIUM CURRENT |
| ATW | MEDIUM POWER |
| ATX | MEDIUM SPEED |
| BWE | MEDIUM VOLTAGE |
| ATY | MONOLITHIC |
| BWF | MONOSTABLE |
| ATZ | MULTICHIP |
| AWA | MULTIPHASE OUTPUTS |
| AWB | NEGATIVE EDGE TRIGGERED |
| AWC | NEGATIVE OUTPUTS |
| BWG | OPEN DRAIN |
| BWH | OPTICALLY COUPLED |
| BWJ | PALLADIUM FREE |
| BWK | PARALLEL OPERATION |
| BWL | PHASE SENSITIVE |
| BWM | POSITIVE EDGE TRIGGERED |
| AWD | POSITIVE OUTPUTS |
| BWP | PRECONDITIONED |
| AWE | PRESETTABLE |
| AWF | PROGRAMMABLE |
| AWG | PROGRAMMED |
| CEB | QUALITY ASSURANCE LEVEL L |
| DMH | QUALITY ASSURANCE LEVEL P |
| DMJ | QUALITY ASSURANCE LEVEL Y |
| BWQ | RADIATION HARDENED |
| BWR | RADIATION SENSITIVE |
| BWS | READABLE |
| BWT | RELIABILITY SCREENING REQUIRED |
| AWH | RESETTABLE |
| AWJ | RETRIGGERABLE |
| BWW | REVERSIBLE |
| BWX | REVERSIBLE UP/DOWN |
| BWY | SATURATED |
| AWK | SCHOTTKY |
| CZY | SCREENING SEQUENCES A |
| CZZ | SCREENING SEQUENCES B |
| DAA | SCREENING SEQUENCES C |
| DAB | SCREENING SEQUENCES D |
| BWZ | SELECTED ITEM |
| BXA | SEMISYNCHRONOUS |
| BXB | STABILIZED |
| BXC | STATIC OPERATION |
| AWL | SYNCHRONOUS |
| BXD | TEMPERATURE COMPENSATED |
| AWM | TEMPERATURE CONTROLLED |
| DJF | TESTED TO MIL-STD-883 |
| ADF | THERMAL OVERLOAD PROTECTION |
| BXE | THICK FILM |
| BXF | THIN FILM |
| AWN | TRUE/COMPLEMENTARY |
| BXG | ULTRAVIOLET ERASABLE |
| BXH | UNCOMPENSATED |
| AWP | UNIPOLAR |
| DJG | VERY HIGH SPEED |
| BXJ | W/ACTIVE PULL-UP |
| BXK | W/AUTOMATIC GAIN CONTROL |
| BXL | W/BENT LEADS |
| BXM | W/BRACKET |
| AWR | W/BUFFERED OUTPUT |
| BXN | W/CARRY/SAVE |
| AWT | W/CHOPPER |
| AWW | W/CLEAR |
| BFG | W/CLOCK |
| BXP | W/CLOCKED OUTPUTS |
| BXQ | W/CLOCKED SAVE |
| BXR | W/COMMON CLEAR |
| BXS | W/COMMON CLOCK |
| BXT | W/COMMON EMITTER |
| BXW | W/COMMON ENABLE |
| BXX | W/COMMON MODE |
| BXY | W/COMMON STROBE |
| AWX | W/COMPLEMENT |
| BXZ | W/CURRENT LIMITER |
| BYA | W/DATA LOCKOUT |
| BYB | W/DATA SELECT |
| AWY | W/DECODED OUTPUT |
| BYC | W/DIFFERENTIAL OUTPUTS |
| BYD | W/DIRECTIONAL PORTS |
| BFH | W/DISABLE |
| BYE | W/DOWN LINKS |
| AXA | W/ENABLE |
| BYF | W/EXPANDER |
| BYG | W/FEED THRU OUTPUTS |
| AXB | W/FIELD EFFECT TRANSISTOR SWITCH |
| BYH | W/FILTER |
| BYJ | W/FLAT PACK CARRIER |
| BYK | W/FORMED LEADS |
| AXC | W/GAIN SELECT |
| BYL | W/HEAT SINK |
| BYM | W/HOLDER |
| BYN | W/INDEPENDENT OUTPUTS |
| BYP | W/INHIBIT |
| BYQ | W/INSULATOR |
| BYR | W/LOAD RESET |
| BYS | W/LOAD SELECT |
| BYT | W/MECH-PACKETTE |
| BYW | W/ODD-EVEN CHECK |
| AXD | W/OPEN COLLECTOR |
| BYX | W/PAD |
| BYY | W/PRESET |
| AXF | W/REGISTER OUTPUT |
| BYZ | W/RESET |
| BZA | W/RESISTOR |
| BZB | W/RIPPLE CARRY |
| BZC | W/SAMPLE AND HOLD |
| BZD | W/SCHMITT TRIGGER |
| BZE | W/SENSOR |
| BZF | W/SHAPING |
| BZG | W/SHORT CIRCUIT PROTECTION |
| AXG | W/STORAGE |
| AXH | W/STROBE |
| AXJ | W/SWITCH |
| AXK | W/TOTEM POLE OUTPUT |
| BZH | W/TRANSPARENT LID |
| BZJ | W/VOLTAGE FOLLOW |
| BZK | WELDABLE LEADS |
| BZL | WIDEBAND |
| AWQ | WIRE-OR OUTPUTS |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDRHA000*;PRMTDAGA000$DIRA000*;PRMTDAGA000$$DIRA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRHA000E2.0*;PMWTJRHA000E2.0$JRHA000E2.0*;PMWTJRHA000E2.0$$JRHA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAZA0002.0*;PMLCJAZA0002.0$JAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)