A machine that drills and/or routs circuit boards to provide holes/or slots for wiring, attachment of hardware, or precision perimeter. It is a precision machine for delicate close tolerance work. Exludes MACHINING CENTER.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED40158*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
AAXXDMOUNTING TYPE
INDICATES THE TYPE OF MOUNT UTILIZED TO SUPPORT THE ITEM.
Enter the applicable reply code from the table below
(AAXXDCA)
| Table 1 |
| Reply Code (AA78) | Reply |
| BT | BENCH |
| ABQ | CLAMP |
| CA | FLOOR |
| AFK | MAGNETIC |
| AFL | VACUUM |
APHEDOPERATION METHOD
THE MEANS USED TO OPERATE THE ITEM.
Enter the applicable reply code from the table below
(APHEDAGH*;APHEDAAF$$DAAC*)
| Table 1 |
| Reply Code (AC58) | Reply |
| AAC | AUTOMATIC |
| AGH | COMPUTER NUMERICAL CONTROL |
| AAF | MANUAL |
| AGJ | NUMERICAL CONTROL |
| AGK | TEMPLATE TRACING |
BNRZDCOLUMN TYPE
INDICATES THE TYPE OF COLUMN PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(BNRZDBFP)
| Table 1 |
| Reply Code (AK54) | Reply |
| ACH | BOX |
| BFP | ROUND |
BNRYGDRILLING CAPABILITY
THE DRILLING CAPABILITY/IES/ OF THE ITEM.
Enter clear text.
(BNRYGCLEARTEXT)
BCRHASPINDLE QUANTITY
THE NUMBER OF SPINDLES PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BCRHA10*)
BNSB*JDISTANCE BETWEEN SPINDLE CENTERS
THE DISTANCE BETWEEN THE SPINDLE CENTERS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSBJAA2.0*;BNSBJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) EZ OR FB WERE ENTERED FOR MRC BQLR, YOU MUST ANSWER MRC (BNSC)
IF STYLE/REPLY CODE(s) FA WERE ENTERED FOR MRC BQLR, YOU MUST ANSWER MRC (BNRK)
BQLRDSPINDLE TYPE
INDICATES THE TYPE OF SPINDLE PROVIDED.
Enter the applicable reply code from the table below
(BQLRDFC)
| Table 1 |
| Reply Code (AC55) | Reply |
| EZ | SOLID MALE TAPERED FOR DRILL CHUCK |
| FA | TAPERED SOCKET |
| FB | THREADED END FOR DRILL CHUCK |
| FC | TURRET HEAD |
BNSC*GDRILL CHUCK SIZE ACCOMMODATED
DESIGNATES THE SIZE OF THE DRILL CHUCK THE ITEM WILL ACCOMMODATE.
Enter clear text.
(BNSCGCLEARTEXT)
BNRK*JSPINDLE SOCKET TAPER SIZE
DESIGNATES THE COMMERCIAL TAPER SIZE OF THE SPINDLE SOCKET.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(BNRKJABTEXT1234*)
| Table 1 |
| Reply Code (AH09) | Reply |
| AR | AMERICAN STANDARD TAPER |
| AD | BROWN AND SHARPE |
| AC | JARNO |
| AB | MORSE |
BNRLJSPINDLE TRAVEL DISTANCE
THE DISTANCE THE SPINDLE WILL TRAVEL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNRLJAB2.0*;BNRLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNSDJDISTANCE FROM SPINDLE CENTER TO COLUMN
THE DISTANCE FROM THE CENTER OF THE SPINDLE TO THE COLUMN.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSDJAB2.0*;BNSDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BTSZASPINDLE SPEED QUANTITY
THE NUMBER OF SPINDLE SPEEDS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(BTSZA10*)
BTTBFSPINDLE SPEED RANGE IN RPM
THE MINIMUM TO MAXIMUM SPEED LIMITS OF THE SPINDLE,EXPRESSED IN REVOLUTIONS PER MINUTE.
Enter the range of numeric values with a minimum of one digit on both sides of the decimal. Separating range values with a slash and preceding negative values with an ‘M’ and positive values with a ‘P’.
(BTTBFM2.0/P4.7*)
AQDDDFEED TYPE
INDICATES THE TYPE OF FEED PROVIDED.
Enter the applicable reply code from the table below
(AQDDDBD)
| Table 1 |
| Reply Code (AK97) | Reply |
| BD | HAND |
| BZ | POWER |
IF STYLE/REPLY CODE(s) RF OR RZ WERE ENTERED FOR MRC AJGD, YOU MUST ANSWER MRC (BPSX)
AJGDDHEAD TYPE
INDICATES THE TYPE OF HEAD PROVIDED.
Enter the applicable reply code from the table below
(AJGDDRF)
| Table 1 |
| Reply Code (AE98) | Reply |
| PJ | FIXED |
| RZ | RADIAL SWINGING/SLIDING |
| RF | SLIDING |
BPSX*JHEAD VERTICAL ADJUSTMENT
THE MEASURED DISTANCE THE HEAD CAN BE ADJUSTED VERTICALLY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BPSXJAC2.0*;BPSXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNSFDBASE WORKING SURFACE TYPE
INDICATES THE TYPE OF BASE WORKING SURFACE PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(BNSFDBSA)
| Table 1 |
| Reply Code (AK54) | Reply |
| AHL | PLAIN |
| CHF | PLAIN W/COOLANT TROUGH |
| BSA | SLOTTED |
| CHG | SLOTTED W/COOLANT TROUGH |
| CHH | TEE SLOTTED |
BNSGDBASE WORKING SURFACE SHAPE
THE PHYSICAL CONFIGURATION OF THE BASE WORKING SURFACE.
Enter the applicable reply code from the table below
(BNSGDRT)
| Table 1 |
| Reply Code (AD07) | Reply |
| RT | RECTANGULAR |
| RD | ROUND |
| SQ | SQUARE |
BNSH*JBASE WORKING SURFACE AREA
A MEASUREMENT OF THE BASE WORKING SURFACE AREA ON THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSHJDD2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| DD | SQUARE INCHES |
| GN | SQUARE MILLIMETERS |
BNSJ*JBASE WORKING SURFACE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BASE WORKING SURFACE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSJJAC2.0*;BNSJJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNRW*JBASE WORKING SURFACE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE BASE WORKING SURFACE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNRWJAC2.0*;BNRWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNRX*JBASE WORKING SURFACE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE BASE WORKING SURFACE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNRXJAB2.0*;BNRXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNSK*JBASE WORKING SURFACE VERTICAL ADJUSTMENT
THE DISTANCE THE BASE WORKING SURFACE CAN BE ADJUSTED VERTICALLY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSKJAA2.0*;BNSKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNSLDBASE WORKING SURFACE MOUNTING LOCATION
INDICATES THE LOCATION OF THE ITEM ON WHICH THE BASE WORKING SURFACE IS MOUNTED.
Enter the applicable reply code from the table below
(BNSLDAAX)
| Table 1 |
| Reply Code (AJ91) | Reply |
| AAX | BASE |
| BXE | COLUMN |
BNSMJMAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE
THE MAXIMUM DISTANCE FROM THE CHUCK OR SPINDLE NOSE TO THE BASE WORKING SURFACE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSMJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF YOU ANSWER MRC BNSN, YOU MUST ANSWER MRC (BNSP)
BNSN*DUPPER WORKING SURFACE TYPE
INDICATES THE TYPE OF UPPER WORKING SURFACE PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(BNSNDCHN)
| Table 1 |
| Reply Code (AK54) | Reply |
| ADQ | DRILL |
| AHL | PLAIN |
| CHP | PLAIN W/ANGLE BRACKET |
| CHF | PLAIN W/COOLANT TROUGH |
| CHN | PLAIN W/PLAIN SKIRT |
| CHM | PLAIN W/SLOTTED SKIRT |
| BSA | SLOTTED |
| CHQ | SLOTTED W/CENTER HOLE |
BNSP*DUPPER WORKING SURFACE SHAPE
THE PHYSICAL CONFIGURATION OF THE UPPER WORKING SURFACE.
Enter the applicable reply code from the table below
(BNSPDRD)
| Table 1 |
| Reply Code (AD07) | Reply |
| RT | RECTANGULAR |
| RD | ROUND |
| SQ | SQUARE |
BNSQ*JUPPER WORKING SURFACE AREA
A MEASUREMENT OF THE UPPER WORKING SURFACE AREA ON THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSQJDD2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| DD | SQUARE INCHES |
| GN | SQUARE MILLIMETERS |
BNSR*JUPPER WORKING SURFACE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE UPPER WORKING SURFACE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSRJAB2.0*;BNSRJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNSS*JUPPER WORKING SURFACE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE UPPER WORKING SURFACE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSSJAA2.0*;BNSSJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNST*JUPPER WORKING SURFACE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE UPPER WORKING SURFACE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSTJAA2.0*;BNSTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC BNSW, YOU MUST ANSWER MRC (BNSX and BNSY and BNSZ)
BNSW*DUPPER WORKING SURFACE ADJUSTMENT FEATURE
AN INDICATION OF WHETHER OR NOT AN UPPER WORKING SURFACE ADJUSTMENT FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(BNSWDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
BNSX*JUPPER WORKING SURFACE VERTICAL ADJUSTMENT
THE DISTANCE THE UPPER WORKING SURFACE CAN BE ADJUSTED VERTICALLY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSXJAB2.0*;BNSXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BNSY*BSWIVEL ADJUSTMENT IN DEG
THE SWIVEL ADJUSTMENT,EXPRESSED IN DEGREES.
Enter a reply with a minimum of one digit on either side of the decimal point.
(BNSYB2.0)
BNSZ*JTILT ADJUSTMENT DIRECTION AND ANGLE IN DEG
THE DIRECTION AND NUMBER OF DEGREES IN WHICH THE ANGLE OF TILT CAN BE ADJUSTED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNSZJBXR2.0*)
| Table 1 |
| Reply Code (AK54) | Reply |
| BXQ | LEFT |
| BXR | RIGHT |
BWJN*DUPPER WORKING SURFACE MOUNTING LOCATION
INDICATES THE LOCATION OF THE ITEM ON WHICH THE UPPER WORKING SURFACE IS MOUNTED.
Enter the applicable reply code from the table below
(BWJNDBXF)
| Table 1 |
| Reply Code (AJ91) | Reply |
| AAX | BASE |
| BXE | COLUMN |
| BXJ | INTERMEDIATE TABLE |
| BXH | OVER BASE SURFACE |
| BXF | OVER LOWER ROUND TABLE |
| BXG | OVER ROUND TABLE SURFACE |
BWJP*JMAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE
THE MAXIMUM DISTANCE FROM THE CHUCK OR SPINDLE NOSE TO THE UPPER WORKING SURFACE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BWJPJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) AHL WERE ENTERED FOR MRC BWJQ, YOU MUST ANSWER MRC (BWJR)
BWJQ*DINTERMEDIATE WORKING SURFACE TYPE
INDICATES THE TYPE OF INTERMEDIATE WORKING SURFACE PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(BWJQDAHL)
| Table 1 |
| Reply Code (AK54) | Reply |
| AHL | PLAIN |
BWJR*DINTERMEDIATE WORKING SURFACE SHAPE
THE PHYSICAL CONFIGURATION OF THE INTERMEDIATE WORKING SURFACE.
Enter the applicable reply code from the table below
(BWJRDRT)
| Table 1 |
| Reply Code (AD07) | Reply |
| RT | RECTANGULAR |
| RD | ROUND |
| SQ | SQUARE |
BWJT*JINTERMEDIATE WORKING SURFACE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE INTERMEDIATE WORKING SURFACE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BWJTJAA2.0*;BWJTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BWJZ*DINTERMEDIATE WORKING SURFACE MOUNTING LOCATION
INDICATES THE LOCATION OF THE ITEM ON WHICH THE INTERMEDIATE WORKING SURFACE IS MOUNTED.
Enter the applicable reply code from the table below
(BWJZDAAX)
| Table 1 |
| Reply Code (AJ91) | Reply |
| AAX | BASE |
| BXE | COLUMN |
BWKB*JMAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO INTERMEDIATE WORKING SURFACE
THE DISTANCE FROM THE CHUCK OR SPINDLE NOSE TO THE INTERMEDIATE WORKING SURFACE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BWKBJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) EE WERE ENTERED FOR MRC BNQL, YOU MUST ANSWER MRC (ABYE and ACDC and ELEC and ALYE and ALBH and AKSQ)
BNQLDMAIN DRIVE TYPE
INDICATES THE TYPE OF MAIN DRIVE PROVIDED FOR TURNING,ROTATING,OR POSITIONING THE MECHANISM.
Enter the applicable reply code from the table below
(BNQLDEE)
| Table 1 |
| Reply Code (AG25) | Reply |
| EE | ELECTRIC MOTOR |
| JW | LINE SHAFT |
ABYE*JELECTRIC MOTOR POWER RATING
THE RATED POWER OF THE ELECTRIC MOTOR.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABYEJH2.0*)
| Table 1 |
| Reply Code (AC33) | Reply |
| H | HORSEPOWER |
| L | KILOWATTS |
| W | WATTS |
IF STYLE/REPLY CODE(s) B OR D WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (FREQ and FAAZ)
ACDC*DCURRENT TYPE
INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.
Enter the applicable reply code from the table below
(ACDCDD*;ACDCDB$DC*)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| D | AC/DC |
| C | DC |
ELEC*BVOLTAGE IN VOLTS
THE TOTAL ELECTRICAL VOLTAGE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ELECB2.0*;ELECB2.02.0$BM2.0*)
FREQ*BFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(FREQB2.0*;FREQB2.02.0$BM2.0*)
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDC*;FAAZDE$DA*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| E | SINGLE/THREE |
| C | THREE |
| B | TWO |
ALYE*DROTATION REVERSIBILITY FEATURE
AN INDICATION OF WHETHER OR NOT A REVERSIBLE ROTATION FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(ALYEDC*;ALYEDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ALBH*DRADIO INTERFERENCE SHIELDING
AN INDICATION OF WHETHER OR NOT SHIELDING AGAINST RADIO INTERFERENCE IS PROVIDED. PLEASE USE MRC ABFF IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(ALBHDB*;ALBHDC$DC*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
AKSQ*DFUNGUS RESISTANT TREATMENT
AN INDICATION OF WHETHER OR NOT A TREATMENT IS INCLUDED TO PRODUCE A FUNGUS RESISTANT CONDITION.
Enter the applicable reply code from the table below
(AKSQDB*;AKSQDC$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information