An item specifically designed to diffuse light by defining the area, direction or amount of light generated by a light assembly of any type. Excludes, but may be used in conjunction with, LENS, LIGHT and FILTER, INDICATOR, LIGHT.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED39662*)
IF STYLE/REPLY CODE(s) 1, 2 OR 3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGFF and ABTB and AEUB and ADAV and ABKW and AETZ)
IF STYLE/REPLY CODE(s) 4, 5 OR 7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGFF and ADAV and ABKW and AETZ)
IF STYLE/REPLY CODE(s) 6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AHGE and ABTD and AGFF and ABKW and AETZ and ADAV)
IF STYLE/REPLY CODE(s) 9 OR 10 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGFF and AEUA and AHGE and ABTD and ABMK and ABKW and ABNZ and ABHP)
IF STYLE/REPLY CODE(s) 19, 22, 48, 60, 11 OR 17 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGFF and ABKW and ABMK and AEUA and ABNZ and ABHP)
IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AEUA and ABMK and ABNZ and ABHP and ABKW)
IF STYLE/REPLY CODE(s) 20 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGFF and ABMK and ABNZ and ABHP and ABKW)
IF STYLE/REPLY CODE(s) 21 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AHGE and ABTD and AEUA and ABMK and ABNZ and ABHP and ABKW)
IF STYLE/REPLY CODE(s) 24 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADUM and ADAV)
IF STYLE/REPLY CODE(s) 25, 26 OR 27 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ADAV)
IF STYLE/REPLY CODE(s) 28 OR 29 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AETZ and AGFF and ABHP and ADAV)
IF STYLE/REPLY CODE(s) 30, 31, 32, 33, 49, 50, 54 OR 87 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADAV)
IF STYLE/REPLY CODE(s) 34 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABHP and ABTD and AHGE and ABKW)
IF STYLE/REPLY CODE(s) 35 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABTB and ABMK and ABKW and ABHP)
IF STYLE/REPLY CODE(s) 36 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGFF and ABMK and ABKW and ABHP)
IF STYLE/REPLY CODE(s) 37, 56, 57 OR 65 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABKW and ABHP)
IF STYLE/REPLY CODE(s) 38 OR 41 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AHGE and ABTD and AETZ and ABKW and ADAV and AGFF)
IF STYLE/REPLY CODE(s) 39 OR 42 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AESB and AESA and AETZ and ABKW and ABHP)
IF STYLE/REPLY CODE(s) 40 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABTB and ABHP and ABMK and ABKW)
IF STYLE/REPLY CODE(s) 43 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGFF and ABKW and ADAV)
IF STYLE/REPLY CODE(s) 45 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AEUB and ABMK and ABKW and ABHP and ABTB and AEUC)
IF STYLE/REPLY CODE(s) 46, 51, 91, 95, 96, 97 OR 98 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABMK)
IF STYLE/REPLY CODE(s) 52 OR 53 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and AESD and ADAV)
IF STYLE/REPLY CODE(s) 58 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AHGD and ABHP and ABMK and ABKW)
IF STYLE/REPLY CODE(s) 59 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAGT and AHGD and AETY and AETW and AETX and ABMK and ABHP)
IF STYLE/REPLY CODE(s) 61 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABHP and ABNZ and AGFF and ABKW)
IF STYLE/REPLY CODE(s) 62 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABNZ and ABKW and AHGD and ABMK and AGFF and AEUA)
IF STYLE/REPLY CODE(s) 63 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and AHGD and ABMK and ABKW)
IF STYLE/REPLY CODE(s) 64 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AHGE and ABMK and ABHP and ABKW and ABTD)
IF STYLE/REPLY CODE(s) 66 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABTB and ADAV and AEUB and ABKW)
IF STYLE/REPLY CODE(s) 67 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AGFF and AHGE and ABTD and ABMK and AEUA and ABKW and ABNZ and ABHP)
IF STYLE/REPLY CODE(s) 44 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AESA and AESB and AETZ and ABKW and ABHP)
IF STYLE/REPLY CODE(s) 47 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABQA and ABQB and ABKW)
IF STYLE/REPLY CODE(s) 55 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AEUD and ABMK and ABHP and AHGE and ABTD and ABKW)
IF STYLE/REPLY CODE(s) 68 OR 70 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABNZ and ABHP and AETZ)
IF STYLE/REPLY CODE(s) 69 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABTB and ABKW and ABMK and AEUB and ABHP)
IF STYLE/REPLY CODE(s) 71 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AESD and ABNZ and AETZ and ABHP)
IF STYLE/REPLY CODE(s) 73 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABNZ and ABHP and AEUA and AESD and ABKW)
IF STYLE/REPLY CODE(s) 72, 74, 75, 78, 79, 80, 81, 82, 83, 84, 85, 86 OR 90 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and AETZ and ABHP)
IF STYLE/REPLY CODE(s) 77 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV and ABNZ and ABHP and AETZ)
IF STYLE/REPLY CODE(s) 88 OR 89 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADAV and ABNZ)
IF STYLE/REPLY CODE(s) 92 OR 94 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AETZ and AAVK and ADAV and ABHP)
IF STYLE/REPLY CODE(s) 93 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AAVK and ADAV and ABHP)
IF STYLE/REPLY CODE(s) 150 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AEUA and ABMK and ABNZ and ABHP and ABKW and AHGD and ABTB)
IF STYLE/REPLY CODE(s) 99 OR 100 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABKW and ABHP and ABMK)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLL36)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAO1238 | 1 | FLAT |
| AAO1246 | 10 | FLAT |
| AAO1329 | 100 | DOME, SQUARE END CAP |
| AAO1247 | 11 | FLAT ANGULAR |
| AAO1248 | 14 | FLAT |
| AAO1330 | 150 | FLAT |
| AAO1249 | 17 | FLAT ANGULAR |
| AAO1250 | 19 | FLAT |
| AAO1239 | 2 | FLAT |
| AAO1251 | 20 | FLAT |
| AAO1252 | 21 | CONVEX |
| AAO1253 | 22 | CONVEXO CONCAVE |
| AAO1254 | 24 | FLAT |
| AAO1255 | 25 | PLANO CONVEX |
| AAO1256 | 26 | CONVEXO CONVEX |
| AAO1257 | 27 | CONVEXO CONCAVE |
| AAO1258 | 28 | STOVEPIPE |
| AAO1259 | 29 | DOME |
| AAO1240 | 3 | FLAT |
| AAO1260 | 30 | TUBULAR |
| AAO1261 | 31 | STOVEPIPE |
| AAO1262 | 32 | CYLINDRICAL |
| AAO1263 | 33 | CYLINDRICAL |
| AAO1264 | 34 | RECTANGULAR |
| AAO1265 | 35 | TEAR DROP |
| AAO1266 | 36 | TEAR DROP |
| AAO1267 | 37 | TEAR DROP |
| AAO1268 | 38 | DOME |
| AAO1269 | 39 | DOME |
| AAO1241 | 4 | CONVEX |
| AAO1270 | 40 | TEAR DROP |
| AAO1271 | 41 | FLAT |
| AAO1272 | 42 | DOME |
| AAO1273 | 43 | DOME |
| AAO1274 | 44 | DOME |
| AAO1275 | 45 | FLAT |
| AAO1276 | 46 | FLAT |
| AAO1277 | 47 | CONICAL |
| AAO1278 | 48 | FLAT |
| AAO1279 | 49 | FLAT |
| AAO1242 | 5 | CONVEX |
| AAO1280 | 50 | FLAT |
| AAO1281 | 51 | FLAT |
| AAO1282 | 52 | ROUND |
| AAO1283 | 53 | CYLINDRICAL |
| AAO1284 | 54 | ROUND |
| AAO1285 | 55 | CONVEX |
| AAO1286 | 56 | FLAT |
| AAO1287 | 57 | FLAT |
| AAO1288 | 58 | FLAT |
| AAO1289 | 59 | FLAT |
| AAO1243 | 6 | FLAT |
| AAO1290 | 60 | DOME |
| AAO1291 | 61 | FLAT |
| AAO1292 | 62 | CONVEX |
| AAO1293 | 63 | CONVEX |
| AAO1294 | 64 | CONVEX |
| AAO1295 | 65 | FLAT |
| AAO1296 | 66 | CONVEX |
| AAO1297 | 67 | CONVEX |
| AAO1298 | 68 | STOVEPIPE |
| AAO1299 | 69 | FLAT |
| AAO1244 | 7 | DOME |
| AAO1300 | 70 | STOVEPIPE |
| AAO1301 | 71 | FLAT |
| AAO1302 | 72 | FLAT |
| AAO1303 | 73 | FLAT |
| AAO1304 | 74 | CONVEX |
| AAO1305 | 75 | FLAT |
| AAO1306 | 77 | STOVEPIPE |
| AAO1307 | 78 | TORPEDO |
| AAO1308 | 79 | STOVEPIPE |
| AAO1309 | 80 | STOVEPIPE |
| AAO1310 | 81 | CONVEX |
| AAO1311 | 82 | STOVEPIPE |
| AAO1312 | 83 | CONVEX |
| AAO1313 | 84 | CONVEX |
| AAO1314 | 85 | CONVEX |
| AAO1315 | 86 | FLAT |
| AAO1316 | 87 | STOVEPIPE |
| AAO1317 | 88 | STOVEPIPE |
| AAO1318 | 89 | CYLINDRICAL |
| AAO1245 | 9 | FLAT |
| AAO1319 | 90 | CYLINDRICAL |
| AAO1320 | 91 | FLAT |
| AAO1321 | 92 | STOVEPIPE |
| AAO1322 | 93 | FLAT |
| AAO1323 | 94 | FLAT |
| AAO1324 | 95 | HORIZONTAL SPLIT |
| AAO1325 | 96 | VERTICAL SPLIT |
| AAO1326 | 97 | THREE WAY SPLIT |
| AAO1327 | 98 | FOUR WAY SPLIT |
| AAO1328 | 99 | FLAT, SQUARE END CAP |
AAGT*JWALL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE WALL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAGTJAA2.0*;AAGTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAVK*JSHOULDER LENGTH
THE LENGTH OF THE ENLARGED PORTION/S/ LOCATED ON THE SHANK OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAVKJAC2.0*;AAVKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABNZ*JEFFECTIVE LENGTH
A MEASUREMENT OF THE LONGEST EFFECTIVE DIMENSION OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNZJAB2.0*;ABNZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABQA*JTAPER MINOR DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SMALLEST CIRCULAR CROSS SECTION OF THE TAPERED PORTION,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABQAJAB2.0*;ABQAJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABQB*JTAPER MAJOR DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE LARGEST CIRCULAR CROSS SECTION OF THE TAPERED PORTION,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABQBJAC2.0*;ABQBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTB*JMOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTBJAC2.0*;ABTBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABTD*JMOUNTING SLOT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING SLOT,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTDJAA2.0*;ABTDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUM*JOVERALL THICKNESS
AN OVERALL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUMJAA2.0*;ADUMJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AESA*JMOUNTING EAR LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AESAJAB2.0*;AESAJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AESB*JMOUNTING EAR WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AESBJAB2.0*;AESBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AESD*JMOUNTING END DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE MOUNTING END,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AESDJAA2.0*;AESDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AETW*JPLATEAU LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AETWJAC2.0*;AETWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AETX*JPLATEAU WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AETXJAB2.0*;AETXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AETY*JPLATEAU HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AETYJAA2.0*;AETYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AETZ*JEFFECTIVE DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AETZJAB2.0*;AETZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEUA*JEFFECTIVE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEUAJAA2.0*;AEUAJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEUB*JMAJOR CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEUBJAC2.0*;AEUBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEUC*JMINOR CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEUCJAB2.0*;AEUCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEUD*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING SLOTS
A MEASUREMENT OF THE CENTER TO CENTER DISTANCE BETWEEN MOUNTING SLOTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEUDJAA2.0*;AEUDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AGFF*JFLANGE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A FLANGE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AGFFJAA2.0*;AGFFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHGD*JFLANGE HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF A FLANGE,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHGDJAA2.0*;AHGDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHGE*JMOUNTING SLOT DEPTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHGEJAC2.0*;AHGEJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3ADDDCU0079*;MATT3ADDDCU0079$DPCH000*;MATT3ADDDCU0079$$DPCH000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ACX | HOLDER |
| 3ADD | INSERT |
| 3AEE | OVERALL |
| 3AWH | FILTER |
| 3AWI | LENS |
| 3AWJ | DIFFUSOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALD000 | ALUMINA |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL2011 | ALUMINUM ALLOY 2011 |
| AL0181 | ALUMINUM ALLOY 2017A |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL6061 | ALUMINUM ALLOY 6061 |
| GFB000 | BAKELITE-GRAPHITE (USE PCM000) |
| CNB000 | CARBON GRAPHITE |
| CSB000 | CELLULOSE ACETATE |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0244 | COPPER ALLOY 125A |
| CU0079 | COPPER ALLOY 260 |
| CU0091 | COPPER ALLOY 360 |
| CU1120 | COPPER ALLOY CU-ZN36 |
| CU1128 | COPPER ALLOY CU-ZN40 |
| GSA000 | GLASS |
| GSD000 | GLASS CRYSTAL |
| GSB000 | GLASS FIBER |
| GSG000 | GLASS SAFETY |
| AYA000 | MICA |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCD000 | PLASTIC ACRYLIC |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCH000 | PLASTIC EPOXY |
| PCBB00 | PLASTIC METHACRYLATE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCCB00 | PLASTIC NYLON |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| RCE000 | RUBBER |
| RCA000 | RUBBER NATURAL |
| RCB000 | RUBBER SYNTHETIC |
| SLK000 | SILICONE |
| STA000 | STEEL |
| ST0302 | STEEL COMP 302 |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ACX | HOLDER |
| 3ADD | INSERT |
| 3AEE | OVERALL |
| 3AWH | FILTER |
| 3AWI | LENS |
| 3AWJ | DIFFUSOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
CQHKDLIGHT TRANSMISSION DESIGN
THE DESIGN CHARACTERISTIC WHICH CONTROLS THE EMERGENCE OF LIGHT.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CQHK3AWHDAE*;CQHK3AWHDAE$DAJ*;CQHK3AWHDAE$$DAJ*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ADD | INSERT |
| 3AEE | OVERALL |
| 3AWH | FILTER |
| 3AWI | LENS |
| 3AWJ | DIFFUSOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF93) | Reply |
| AE | OPAQUE |
| AH | TRANSLUCENT |
| AJ | TRANSPARENT |
IF STYLE/REPLY CODE(s) PN WERE ENTERED FOR MRC SFCD, YOU MUST ANSWER MRC (CSGX)
SFCD*DSURFACE CONDITION
THE CONDITION OF THE ITEM WITH RESPECT TO THE TEXTURE OF THE SURFACE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFCD3AWLDSD*;SFCD3AWLDSD$DPN*;SFCD3AWLDSD$$DPN*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABD | BACK |
| 3AEE | OVERALL |
| 3AWL | FACE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN72) | Reply |
| AE | ACID ETCHED |
| AS | ASYMMETRICAL |
| CC | CONCENTRIC RINGS |
| CR | CONCENTRICALLY RIBBED |
| CH | CROSS HATCHED |
| DG | DIVERGENCE |
| EN | ENGRAVED |
| EC | ETCHED |
| FS | FACETED |
| FG | FINE GROUND |
| FL | FLUTED |
| FZ | FRESNEL |
| FR | FROSTED |
| GD | GROOVED |
| GR | GROUND |
| HM | HAMMERED |
| HC | HONEYCOMB |
| MT | MATTED |
| LS | OPALESCENT |
| PN | PAINTED |
| PB | PEBBLED |
| PM | PRISMATIC |
| RB | RIBBED |
| SB | SAND BLASTED |
| SM | SMOOTH |
| SP | STEPPED |
| SD | STIPPLED |
| SY | SYMMETRICAL |
CSGX*DSURFACE CONDITION COLOR
THE HUE OR TINT OF THE SURFACE CONDITION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CSGX3AEEDYE0000*;CSGX3AEEDYE0000$DSL0001*;CSGX3AEEDYE0000$$DSL0001*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AWL | FACE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AM0000 | AMBER |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0001 | BLACK, FED STD 595, 17038 |
| BL0032 | BLACK, FED STD 595, 27038 |
| BL0033 | BLACK, FED STD 595, 37038 |
| BU0000 | BLUE |
| BU0154 | BLUE, AVIATION |
| BU0002 | BLUE, DAYLIGHT |
| BU0152 | BLUE, FED STD 595, 15080 |
| BU0030 | BLUE, MIDNIGHT |
| BU0042 | BLUE, ROYAL |
| BU0004 | BLUE-WHITE |
| MS0012 | BRASS |
| CL0000 | CLEAR |
| CT0001 | COPPER |
| CR0001 | CREAM WHITE |
| GY0007 | GRAY, CHARCOAL |
| GY0029 | GRAY, FED STD 595, 36231 |
| GY0002 | GRAY, LIGHT |
| GY0003 | GRAY, SLATE |
| GY0020 | GRAY, SMOKE |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0069 | GREEN, AVIATION |
| GR0021 | GREEN, EMERALD |
| GR0067 | GREEN, FED STD 595, 34227 |
| GR0026 | GREEN, GRAY |
| GR0155 | GREEN, IDENTIFICATION |
| GR0006 | GREEN, MEDIUM |
| GR0042 | GREEN, YELLOW |
| VY0000 | IVORY |
| MS0038 | NICKEL |
| LD0000 | OLIVE DRAB |
| MS0041 | OPAL |
| MS0082 | OPALESCENT |
| RG0000 | ORANGE |
| PK0000 | PINK |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0081 | RED, AVIATION |
| RE0009 | RED, BRIGHT |
| RE0068 | RED, FED STD 595, 11105 |
| RE0001 | RED, FED STD 595, 11136 |
| RE0119 | RED, IDENTIFICATION |
| RE0209 | RED, INSTRUMENT AND PANEL LIGHT |
| RE0020 | RUBY |
| RE0208 | RUBY, MEDIUM |
| SL0000 | SILVER |
| SL0001 | SILVER, FED STD 595, 17178 |
| MS0056 | TERRA COTTA |
| WH0000 | WHITE |
| WH0061 | WHITE, AVIATION |
| WH0003 | WHITE, CHALK |
| WH0025 | WHITE, FED STD 595, 17875 |
| WH0026 | WHITE, FED STD 595, 37778 |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0004 | WHITE, LUNAR |
| WH0093 | WHITE, LUNAR, IDENTIFICATION |
| WH0042 | WHITE, MILK |
| WH0043 | WHITE, OPAL |
| WH0039 | WHITE, OPALESCENT |
| WH0085 | WHITE, PEARL |
| YE0000 | YELLOW |
| YE0004 | YELLOW, ARC |
| YE0094 | YELLOW, AVIATION |
| YE0148 | YELLOW, IDENTIFICATION |
| YE0105 | YELLOW, IRIDESCENT |
| YE0018 | YELLOW, LIGHT |
| YE0149 | YELLOW, TOPAZ |
CQSC*DHOLDER SURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE HOLDER IS PLATED,DIPPED AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(CQSCDNLA000*;CQSCDZNA000$DENA000*;CQSCDZNA000$$DENA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMC000 | CHROMATE MAGNESIUM |
| CRA000 | CHROMIUM |
| CUB000 | COPPER ALLOY |
| ENA000 | ENAMEL |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| LQA000 | LACQUER |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| AGA000 | SILVER |
| ZNA000 | ZINC |
CSPD*JHOLDER SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE HOLDER SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a alpha-numeric reply with a minimum of one character.
(CSPDJGG2.0*;CSPDJGG2.0$JGG2.0*;CSPDJGG2.0$$JGG2.1*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| B | FED SPEC |
| C | FED STD |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| Table 2 |
| Reply Code (AP39) | Reply |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
IF STYLE/REPLY CODE(s) AGH WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AASA)
AXGYDMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDAFF*;AXGYDAKE$DAHL*;AXGYDAKE$$DAHL*)
| Table 1 |
| Reply Code (AM39) | Reply |
| BDH | ADHESIVE |
| AFC | BARREL |
| AFD | BARRIER |
| ADG | BAYONET |
| AFF | BEZEL RING |
| ABC | BRACKET(S) |
| AFJ | CELL |
| ABG | CEMENT |
| ABH | CLAMP |
| AFL | CLIP |
| AFS | CUP |
| BPC | EAR |
| AFT | EXTERNAL THREAD |
| ACR | FLANGE |
| AFW | FRAME |
| ACK | HOOK AND PILE TAPE |
| AGH | INTERNAL THREAD |
| BFG | KEY |
| ADC | PRESS FIT |
| AHS | RETAINER BLOCK |
| ABS | RETAINER RING |
| AMY | RETAINING CLIP |
| ABW | SCREW |
| BPD | SCREW RING |
| AHZ | SLIDE |
| ABY | SLOT |
| AHL | SNAP RING |
| ANF | SPRING CLIP |
| ACS | THREAD |
| AET | THREADED STUD(S) |
| AKE | THREADED TUBE |
| AHD | TWIST LOCK |
| ACQ | UNTHREADED HOLE(S) |
| AEW | UNTHREADED STUD |
ACUP*AMOUNTING DEVICE QUANTITY
THE NUMBER OF MOUNTING DEVICES USED AS A MEANS OF ATTACHING THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ACUPA10*)
IF STYLE/REPLY CODE(s) FE, FF, FG, JC, JF, NC, NE, NF OR NS WERE ENTERED FOR MRC BZRR, YOU MUST ANSWER MRC (CQRN and AAJD)
BZRR*DTHREAD SERIES
A DESIGNATION INDICATING THE DIAMETER-PITCH COMBINATION AND THE NUMBER OF THREADS PER MEASUREMENT SCALE APPLIED TO A SERIES OF DIAMETERS.
Enter the applicable reply code from the table below
(BZRRDNC)
| Table 1 |
| Reply Code (AH06) | Reply |
| MM | ACME-MODIFIED |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| SM | ISO M |
| SS | ISO S |
| NP | NPT |
| TS | NPTS |
| UN | UN |
| FF | UN-12 |
| FG | UN-16 |
| FE | UN-8 |
| NE | UNEF |
| NF | UNF |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| NS | UNS |
| WW | WHITWORTH |
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASAJAB2.0*;AASAJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRCK*JTHREAD DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE THREADED PORTION,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRCKJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CQRN*JTHREAD QUANTITY
THE NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CQRNJCTEXT1234*)
| Table 1 |
| Reply Code (AB39) | Reply |
| D | PER CENTIMETER |
| C | PER INCH |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAQ3)
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(AAJFDAAL)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AETK*DDIMMING DEVICE TYPE
INDICATES THE TYPE OF DEVICE WHICH PERMITS MANUAL CONTROL OF THE AMOUNT OF LIGHT TRANSMITTED THROUGH THE LENS.
Enter the applicable reply code from the table below
(AETKDAD*;AETKDAB$DAA*)
| Table 1 |
| Reply Code (AD32) | Reply |
| AA | DISK |
| AB | HINGED CAP |
| AC | MECHANICAL SHUTTER |
| AD | POLARIZED CAP |
| AE | PUSH PULL CAP |
| AF | RINGED CAP |
CRNP*DBLACKOUT DEGREE
AN INDICATION OF THE DEGREE OF BLACKOUT AFFORDED.
Enter the applicable reply code from the table below
(CRNPDC*;CRNPDD$DE*)
| Table 1 |
| Reply Code (AD33) | Reply |
| C | COMPLETE |
| D | PARTIAL BOTTOM |
| E | PARTIAL TOP |
CQKF*AINSCRIPTION
AN INDICATION OF THE INSCRIPTION ON THE ITEM,EXCLUDING PART NUMBER.
Enter the alpha-numeric reply with a minimum of one character.
(CQKFAD5)
HUESDCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3AWIDWH0085*;HUES3AWIDWH0085$DBU0002*;HUES3AWIDWH0085$$DBU0002*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3ACX | HOLDER |
| 3AEE | OVERALL |
| 3AWH | FILTER |
| 3AWI | LENS |
| 3AWJ | DIFFUSOR |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AM0000 | AMBER |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0001 | BLACK, FED STD 595, 17038 |
| BL0032 | BLACK, FED STD 595, 27038 |
| BL0033 | BLACK, FED STD 595, 37038 |
| BU0000 | BLUE |
| BU0154 | BLUE, AVIATION |
| BU0002 | BLUE, DAYLIGHT |
| BU0152 | BLUE, FED STD 595, 15080 |
| BU0030 | BLUE, MIDNIGHT |
| BU0042 | BLUE, ROYAL |
| BU0004 | BLUE-WHITE |
| MS0012 | BRASS |
| CL0000 | CLEAR |
| CT0001 | COPPER |
| CR0001 | CREAM WHITE |
| GY0007 | GRAY, CHARCOAL |
| GY0029 | GRAY, FED STD 595, 36231 |
| GY0002 | GRAY, LIGHT |
| GY0003 | GRAY, SLATE |
| GY0020 | GRAY, SMOKE |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0069 | GREEN, AVIATION |
| GR0021 | GREEN, EMERALD |
| GR0067 | GREEN, FED STD 595, 34227 |
| GR0026 | GREEN, GRAY |
| GR0155 | GREEN, IDENTIFICATION |
| GR0006 | GREEN, MEDIUM |
| GR0042 | GREEN, YELLOW |
| VY0000 | IVORY |
| MS0038 | NICKEL |
| LD0000 | OLIVE DRAB |
| MS0041 | OPAL |
| MS0082 | OPALESCENT |
| RG0000 | ORANGE |
| PK0000 | PINK |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0081 | RED, AVIATION |
| RE0009 | RED, BRIGHT |
| RE0068 | RED, FED STD 595, 11105 |
| RE0001 | RED, FED STD 595, 11136 |
| RE0119 | RED, IDENTIFICATION |
| RE0209 | RED, INSTRUMENT AND PANEL LIGHT |
| RE0020 | RUBY |
| RE0208 | RUBY, MEDIUM |
| SL0000 | SILVER |
| SL0001 | SILVER, FED STD 595, 17178 |
| MS0056 | TERRA COTTA |
| WH0000 | WHITE |
| WH0061 | WHITE, AVIATION |
| WH0003 | WHITE, CHALK |
| WH0025 | WHITE, FED STD 595, 17875 |
| WH0026 | WHITE, FED STD 595, 37778 |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0004 | WHITE, LUNAR |
| WH0093 | WHITE, LUNAR, IDENTIFICATION |
| WH0042 | WHITE, MILK |
| WH0043 | WHITE, OPAL |
| WH0039 | WHITE, OPALESCENT |
| WH0085 | WHITE, PEARL |
| YE0000 | YELLOW |
| YE0004 | YELLOW, ARC |
| YE0094 | YELLOW, AVIATION |
| YE0148 | YELLOW, IDENTIFICATION |
| YE0105 | YELLOW, IRIDESCENT |
| YE0018 | YELLOW, LIGHT |
| YE0149 | YELLOW, TOPAZ |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAEG*;CBBLDFNY$$DAEJ*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AEG | PRESS TO TEST |
| AEH | REVERSED INSCRIPTION METHOD |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| AEJ | ROTATABLE ALIGNMENT CAPABILITY |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
AFJF*DSPECIFIC USE
THE REQUIRED PURPOSE OR APPLICATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AFJFDBJ)
| Table 1 |
| Reply Code (AD34) | Reply |
| AA | AIRCRAFT ANTI-COLLISION LIGHT |
| AB | AIRCRAFT BEACON LIGHT |
| AC | AIRCRAFT COCKPIT LIGHT |
| AD | AIRCRAFT DOME LIGHT |
| AE | AIRCRAFT LANDING LIGHT |
| AF | AIRCRAFT NAVIGATIONAL LIGHT |
| AG | AIRCRAFT OBSTRUCTION MARKER |
| AH | AIRCRAFT RECOGNITION LIGHT |
| AJ | AIRCRAFT SIGNAL LIGHT |
| AK | AIRCRAFT TAXI LIGHT |
| AL | AIRCRAFT TRAFFIC LIGHT |
| AM | AIRPORT APPROACH GLIDE ANGLE LIGHT |
| AN | AIRPORT RUNWAY MARKER LIGHT |
| AP | CARBIDE FLOODLIGHT |
| AQ | DENTAL OPERATING LIGHT |
| AR | DISTRESS MARKER LIGHT |
| AS | ELECTRIC FLOODLIGHT |
| AT | ELECTRIC LANTERN |
| AU | GROUND OBSTRUCTION MARKER LIGHT |
| AV | GROUND VEHICLE BACKUP LIGHT |
| AW | GROUND VEHICLE CLEARANCE MARKER LIGHT |
| AX | GROUND VEHICLE DIRECTIONAL SIGNAL LIGHT |
| AY | GROUND VEHICLE DOME LIGHT |
| AZ | GROUND VEHICLE FOG LIGHT |
| BA | GROUND VEHICLE HEADLIGHT |
| BB | GROUND VEHICLE PARKING LIGHT |
| BC | GROUND VEHICLE STOP LIGHT |
| BD | GROUND VEHICLE STOP LIGHT-TAILLIGHT |
| BE | GROUND VEHICLE TAILLIGHT |
| BF | GROUND VEHICLE WARNING LIGHT |
| BG | HAND FLASHLIGHT |
| BH | INDICATOR LIGHT |
| BJ | MARINE CRAFT BEACON LIGHT |
| BK | MARINE CRAFT DOME LIGHT |
| BL | MARINE CRAFT NAVIGATIONAL LIGHT |
| BM | MARINE CRAFT SIGNAL LIGHT |
| BN | PANEL LIGHT |
| BP | SEARCHLIGHT, CARBON ARC |
| BQ | SEARCHLIGHT, ELECTRIC |
| BR | SPOTLIGHT |
| BS | SURGICAL OPERATING LIGHT |
AFJH*GFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter clear text.
(AFJHGCLEARTEXT)
ABFE*DHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDDX*;ABFEDEP$$DAE*)
| Table 1 |
| Reply Code (AB27) | Reply |
| AA | ACID RESISTANT |
| AB | CEMENT TIGHT |
| CG | DRIPPROOF |
| FS | DRIPTIGHT |
| AC | DRIPTIGHT-NEMA TYPE 2 |
| CF | DUSTPROOF |
| AD | DUSTPROOF-NEMA TYPE 13 |
| DY | DUSTTIGHT |
| AE | DUSTTIGHT-NEMA TYPE 5 |
| FR | ELECTROMAGNETIC INTERFERENCE SHIELDED |
| CE | EXPLOSION PROOF |
| AF | EXPLOSION PROOF NEC CL.I, GP.ABCD;CL.II, GP.EFG;CL.III |
| AH | EXPLOSION PROOF NEC CL.I, GP.BC;CL.II, GP.EFG;CL.III |
| AG | EXPLOSION PROOF NEC CL.I, GP.BCD;CL.II, GP.EFG;CL.III |
| AJ | EXPLOSION PROOF NEC CL.I, GP.CD;CL.II, GP.EFG;CL.III |
| AL | EXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.EFG |
| AK | EXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.EFG;CL.III |
| AM | EXPLOSION PROOF NEC CL.I, GP.D;CL.II, GP.G |
| AN | EXPLOSION PROOF NEC CL.II, GP.EFG;CL.III |
| AP | GENERAL PURPOSE-NEMA TYPE 1 |
| DR | HEAT RESISTANT |
| CU | IMPACT PROOF |
| GM | IMPACT RESISTANT |
| DV | MOISTURE PROOF |
| BR | MOISTURE RESISTANT |
| CJ | OILTIGHT |
| AQ | OILTIGHT-NEMA TYPE 11 |
| FB | RADIO FREQUENCY RADIATION SUPPRESSIVE |
| EM | RAINTIGHT |
| AR | RAINTIGHT-NEMA TYPE 3R |
| DT | SALT WATER RESISTANT |
| CV | SAND RESISTANT |
| EU | SHATTER PROOF |
| DU | SHATTER RESISTANT |
| EP | SHOCK RESISTANT |
| EV | SOLVENT RESISTANT |
| DZ | SUBMERSIBLE |
| AS | SUBMERSIBLE-NEMA TYPE 6 |
| EK | VAPOR PROOF |
| ES | VAPORTIGHT |
| GB | VIBRATION RESISTANT |
| CM | WATERPROOF |
| EX | WATERPROOF, MIL-E-13856, TYPE 2, CLASS 1 |
| CN | WATERTIGHT |
| AU | WATERTIGHT-NEMA TYPE 4 |
| DX | WEATHERPROOF |
| AV | WEATHERPROOF-NEMA TYPE 3 |
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDD)
| Table 1 |
| Reply Code (AD40) | Reply |
| D | DELICATE |
| B | EXTREMELY FRAGILE |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
| G | RUGGED |
| C | VERY DELICATE |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDAZA000*;PRMTDPTA000$$DIRA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJPDA000R2.0*;PMWTJPDA000R2.0$$JPDA000R2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJRHA0002.0*;PMLCJRHA0002.0$$JRHA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ008*;HZRDDHAZ011$$DHAZ052*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ052 | ZINC |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information