An indicator designed to display the angular relatioship of two reference points.
ISAC Reply 3AEE added to MRC BNHZ.
ISAC Reply 3EPE added to MRC BNHZ.
ISAC Reply 3EPH added to MRC BNHZ.
ISAC Reply 3EPM added to MRC BNHZ.
ISAC Reply 3EPQ added to MRC BNHZ.
ISAC Reply 3HOU added to MRC BNHZ.
ISAC Reply 1A deleted from MRC BNHZ.
ISAC Reply 1B deleted from MRC BNHZ.
ISAC Reply 1C deleted from MRC BNHZ.
ISAC Reply 1D deleted from MRC BNHZ.
ISAC Reply 1E deleted from MRC BNHZ.
ISAC Reply 1A deleted from MRC BNHZ.
ISAC Reply 1B deleted from MRC BNHZ.
ISAC Reply 1C deleted from MRC BNHZ.
ISAC Reply 1D deleted from MRC BNHZ.
ISAC Reply 1E deleted from MRC BNHZ.
ISAC Reply 1X deleted from MRC BNHZ.
ISAC Reply 1Y deleted from MRC BNHZ.
ISAC Reply 3AEE added to MRC ABWG.
ISAC Reply 3EPE added to MRC ABWG.
ISAC Reply 3EPF added to MRC ABWG.
ISAC Reply 3EPG added to MRC ABWG.
ISAC Reply 3EPH added to MRC ABWG.
ISAC Reply 3EPL added to MRC ABWG.
ISAC Reply 3EPM added to MRC ABWG.
ISAC Reply 3EPU added to MRC ABWG.
ISAC Reply 3EPV added to MRC ABWG.
ISAC Reply 3HOU added to MRC ABWG.
ISAC Reply 1A deleted from MRC ABWG.
ISAC Reply 1B deleted from MRC ABWG.
ISAC Reply 1C deleted from MRC ABWG.
ISAC Reply 1D deleted from MRC ABWG.
ISAC Reply 1E deleted from MRC ABWG.
ISAC Reply 1A deleted from MRC ABWG.
ISAC Reply 1B deleted from MRC ABWG.
ISAC Reply 1C deleted from MRC ABWG.
ISAC Reply 1D deleted from MRC ABWG.
ISAC Reply 1E deleted from MRC ABWG.
ISAC Reply 1X deleted from MRC ABWG.
ISAC Reply 1Y deleted from MRC ABWG.
ISAC Reply 3AEE added to MRC APSK.
ISAC Reply 3EPE added to MRC APSK.
ISAC Reply 3EPF added to MRC APSK.
ISAC Reply 3EPG added to MRC APSK.
ISAC Reply 3EPH added to MRC APSK.
ISAC Reply 3EPM added to MRC APSK.
ISAC Reply 3EPS added to MRC APSK.
ISAC Reply 3EPU added to MRC APSK.
ISAC Reply 3EPX added to MRC APSK.
ISAC Reply 3EQA added to MRC APSK.
ISAC Reply 3HOU added to MRC APSK.
ISAC Reply 1A deleted from MRC APSK.
ISAC Reply 1B deleted from MRC APSK.
ISAC Reply 1C deleted from MRC APSK.
ISAC Reply 1D deleted from MRC APSK.
ISAC Reply 1E deleted from MRC APSK.
ISAC Reply 1A deleted from MRC APSK.
ISAC Reply 1B deleted from MRC APSK.
ISAC Reply 1C deleted from MRC APSK.
ISAC Reply 1D deleted from MRC APSK.
ISAC Reply 1E deleted from MRC APSK.
ISAC Reply 1X deleted from MRC APSK.
ISAC Reply 1Y deleted from MRC APSK.
ISAC Reply 3AEE added to MRC ASST.
ISAC Reply 3EQH added to MRC ASST.
ISAC Reply 3EQI added to MRC ASST.
ISAC Reply 3EQJ added to MRC ASST.
ISAC Reply 3EQK added to MRC ASST.
ISAC Reply 3EQM added to MRC ASST.
ISAC Reply 3EQN added to MRC ASST.
ISAC Reply 3HOU added to MRC ASST.
ISAC Reply 1A deleted from MRC ASST.
ISAC Reply 1B deleted from MRC ASST.
ISAC Reply 1C deleted from MRC ASST.
ISAC Reply 1D deleted from MRC ASST.
ISAC Reply 1E deleted from MRC ASST.
ISAC Reply 1F deleted from MRC ASST.
ISAC Reply 1G deleted from MRC ASST.
ISAC Reply 1H deleted from MRC ASST.
ISAC Reply 1J deleted from MRC ASST.
ISAC Reply 1K deleted from MRC ASST.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3EQQ added to MRC HUES.
ISAC Reply 3EQR added to MRC HUES.
ISAC Reply 3EQS added to MRC HUES.
ISAC Reply 3EQU added to MRC HUES.
ISAC Reply 3EQW added to MRC HUES.
ISAC Reply 3EQY added to MRC HUES.
ISAC Reply 3EQZ added to MRC HUES.
ISAC Reply 3ERB added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED38916*)
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3CEPDCLD000*;MATT3CEPDCLD000$DPCD000*;MATT3CEPDCLD000$$DPCD000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3CEP | CASE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL5052 | ALUMINUM ALLOY 5052 |
| AL7075 | ALUMINUM ALLOY 7075 |
| BND000 | BRONZE |
| BNAAAA | BRONZE CAST |
| CLD000 | CERAMIC |
| CRA000 | CHROMIUM |
| CRB000 | CHROMIUM ALLOY |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CCA000 | COTTON |
| FBA000 | FIBER |
| FG0000 | FIBERGLASS |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| RBR000 | HARD RUBBER |
| FEA000 | IRON |
| FEB000 | IRON CAST |
| LRA000 | LEATHER |
| LRE000 | LEATHER ARTIFICIAL |
| MGB000 | MAGNESIUM ALLOY |
| AYA000 | MICA |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCJ000 | PLASTIC MELAMINE |
| PCCB00 | PLASTIC NYLON |
| PCM000 | PLASTIC PHENOL FORMALDEHYDE (PMO) |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAE00 | PLASTIC POLYSULFONE |
| PCAK00 | PLASTIC SILICONE |
| PCBC00 | PLASTIC STYRENE |
| CLB000 | PORCELAIN |
| STA000 | STEEL |
| ST0302 | STEEL COMP 302 |
| ST0304 | STEEL COMP 304 |
| ST0316 | STEEL COMP 316 |
| STB000 | STEEL CORROSION RESISTING |
| AAA012 | THERMOPLASTIC |
| WDC000 | WOOD |
| WDL000 | WOOD, MAHOGANY |
| WDR000 | WOOD, OAK |
| WDE000 | WOOD, WALNUT |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDBKC*;ALBYDBJN$$DBKX*)
| Table 1 |
| Reply Code (AH21) | Reply |
| BJH | AILERON TRIM |
| BJJ | AIR SPEED |
| BJK | AIRPORT RUNWAY LINE-UP ANGLE |
| BJL | ALTITUDE |
| BJM | ANCHOR ORDER |
| BJP | ANGLE OF ATTACK |
| BJN | ANTENNA HORN |
| BJQ | AZIMUTH RANGE |
| BJR | BANK ANGLE |
| BJS | BINARY CODING DECIMAL |
| BJT | CAUTION RANGE DATA |
| BJU | CHANNEL ALIGNMENT-PORTABLE RADIO |
| BJV | COURSE-STEERING ORDER |
| BJW | CYLINDER HEAD |
| BJX | DIRECTIONAL GYROSCOPIC |
| BJY | DISPLAY FUNCTION |
| BJZ | DISPLAY MODE |
| BKA | ELEVATOR TRIM |
| BKB | ENGINE ORDER |
| BKC | ENGINE PROPELLER ORDER |
| BKD | ENVIRONMENTAL ALARM |
| BKE | FIBER OPTICS |
| BKF | FILM SPEED |
| BKG | FLAG ROTARY |
| BKH | FLIGHT DIRECTOR |
| BKJ | GROUND SYSTEMS GROUP |
| BKK | GYRO COURSE |
| BKL | HANDHELD |
| BKM | HEADING |
| BKN | HELICOPTER ROTOR SYNCHRONISM |
| BKP | INDICATED AIR SPEED |
| BKQ | LIQUID OXYGEN QUANTITY |
| BKR | LOW APPROACH |
| BKS | MAGNETIC LATCHING TYPE |
| BKT | MASTER |
| BKU | MOTOR ORDER |
| BKV | OIL BURNER ORDER |
| BKX | PANEL ANGLE AUXILIARY |
| BKW | PANEL MOUNTED |
| BKY | PLANE ANGLE BOW |
| BKZ | PLANE ANGLE STERN |
| BLA | POSITION |
| BLB | PRESET CHANNEL |
| BLC | PROPELLER ORDER |
| BLD | PROPELLER REVOLUTION SHIPBOARD |
| BQA | RATE OF FLOW |
| BLS | RATE OF TURN |
| BLE | RECORDER |
| BLF | REPEATER |
| BLG | REVOLUTION FORCED DRAFT BLOWER |
| BLH | RUDDER ANGLE |
| BLJ | RUDDER ANGLE ORDER |
| BLW | RUDDER TRIM |
| BLK | SHIP COURSE |
| BLL | SHIP ENGINE ORDER |
| BLM | SHIP SPEED |
| BMG | SIMULATOR |
| BMH | SIMULATOR, SYSTEM LASER |
| BMJ | SIMULATOR, SYSTEM LASER, W/INTEGRAL POWER SOURCE |
| BLN | TABLE MODEL |
| BLP | TACHOMETER |
| ADX | TRANSMISSION LINE |
| BLQ | TRIM ANGLE |
| BLR | TRUE AIR SPEED |
| BLT | VERTICAL SPEED |
| ADY | WAVEGUIDE |
| BLU | WIND DIRECTION |
| BLV | WIND SPEED |
ASKX*AELECTRICAL CONNECTION QUANTITY
THE NUMBER OF ELECTRICAL CONNECTIONS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(ASKXA10*)
ASKZ*GELECTRICAL CONNECTION IDENTIFYING NUMBER
THE IDENTIFYING NUMBER ASSIGNED BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE ELECTRICAL CONNECTION.
Enter clear text.
(ASKZGCLEARTEXT)
AMNL*DPRESENTATION TYPE
INDICATES THE TYPE OF PRESENTATION.
Enter the applicable reply code from the table below
(AMNLDBV*;AMNLDBC$$DBL*)
| Table 1 |
| Reply Code (AJ15) | Reply |
| BK | ALARM |
| BL | AMMETER |
| BM | BUZZER |
| AK | CATHODE RAY TUBE |
| BN | CHART |
| AL | CIRCUIT |
| AM | COUNTER |
| AN | DIAL |
| BP | DIGITAL DISPLAY |
| BQ | DIGITAL MICROCIRCUIT DECODER |
| BR | DIPOLE PICK-UP |
| AP | DROP FLAGS |
| AQ | DRUM DIAL |
| BS | ELECTRON TUBE |
| BT | ELECTRONIC VIBRATOR |
| BU | FIBER OPTIC TRANSMISSION |
| BE | FLASHING LIGHT |
| BV | GALVANOMETER |
| AR | GRAPHIC RECORDER |
| AS | ILLUMINATED WINDOW |
| AT | INDICATOR LIGHT |
| AX | METER |
| BW | PULSED LASER LIGHT |
| BA | REGISTER |
| BX | SELSYN MOTOR |
| BD | SERVO MOTOR |
| BB | SYNCHRO MOTOR |
| BY | TOTALIZING COUNTER |
| AA | VIBRATOR ALARM |
| BZ | VOLTMETER |
| BC | WINDOW |
BNHZ*JACCURACY RATING
AN INDICATION OF THE ACCURACY OF AN ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BNHZ3EPHJBDZ2.0*;BNHZ3EPHJBDZ2.0$JBDZ2.0*;BNHZ3EPHJBDZ2.0$$JBDZ2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EPE | SINGLE INDICATOR SINGLE SCALE |
| 3EPH | SINGLE INDICATOR SECOND SCALE |
| 3EPM | ALL INDICATORS ALL SCALES |
| 3EPQ | ALL INDICATORS DEGREE CELSIUS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AJ40) | Reply |
| BDH | ARC ANGLE IN DEGREES |
| BCT | BAR |
| BCN | CUBIC INCHES |
| BDJ | DECIBELS |
| AAD | DEG CELSIUS |
| AAE | DEG FAHRENHEIT |
| BDK | DEGREE ANGULAR CALIBRATION RANGE |
| BDL | DEGREE QUADRANTS |
| BDM | FATHOM |
| AAF | FEET |
| ABD | FEET PER MINUTE |
| BDN | FOOT-POUNDS |
| BCL | GALLONS |
| BDP | GALLONS PER HOUR |
| BDQ | GALLONS PER MINUTE |
| ABR | GIGAHERTZ |
| BDR | HERTZ |
| BDS | HORSEPOWER |
| AAQ | HOUR |
| AAG | INCHES |
| ABZ | INCHES OF MERCURY |
| BDT | INCH-POUNDS |
| BDU | KILOHERTZ |
| AAH | KNOTS |
| AAJ | KNOTS PER HOUR |
| BBA | LITERS |
| BDV | MACH |
| BDW | MARKER |
| BDX | MARKER DEGREE |
| BDY | MARKER FEET |
| BDZ | MARKER METER |
| BEA | MARKER MILE |
| BEB | MARKER POSITION |
| BEC | MARKER YARD |
| BED | MEGAHERTZ |
| BCW | METERS |
| BBF | MILES |
| AAK | MILES PER HOUR |
| ABC | MILLIMETERS |
| AAX | MINUTES |
| AAM | PERCENT |
| BEE | PERCENT OF FLOW RATE |
| BEF | PERCENT REVOLUTIONS PER MINUTE |
| BEG | PINTS |
| BBB | POUNDS |
| BEH | POUNDS PER HOUR |
| BEJ | POUNDS PER MINUTE |
| BBC | POUNDS PER SQUARE INCH |
| ABE | PULSES PER SECOND |
| BEK | QUARTS |
| ABF | REVOLUTIONS PER MINUTE |
| ABG | REVOLUTIONS PER SECOND |
| ABW | VOLTS |
| BEL | YARDS |
ABWG*ASCALE DIVISION QUANTITY
THE NUMBER OF SCALE DIVISIONS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(ABWG3EPMA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EPE | SINGLE INDICATOR SINGLE SCALE |
| 3EPF | SINGLE INDICATOR ALL SCALES |
| 3EPG | SINGLE INDICATOR FIRST SCALE |
| 3EPH | SINGLE INDICATOR SECOND SCALE |
| 3EPL | ALL INDICATORS SINGLE SCALE |
| 3EPM | ALL INDICATORS ALL SCALES |
| 3EPU | FIRST INDICATOR FIRST SCALE |
| 3EPV | FIRST INDICATOR SECOND SCALE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
APSK*JSCALE RANGE
AN INDICATION OF THE SCALE RANGE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(APSK3EPEJMYM32.0/P50.0*;APSK3EPEJMYM32.0/P50.0$$JMY*;APSK3EPEJMYM32.0/P50.0$JMYM32.0/P50.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EPE | SINGLE INDICATOR SINGLE SCALE |
| 3EPF | SINGLE INDICATOR ALL SCALES |
| 3EPG | SINGLE INDICATOR FIRST SCALE |
| 3EPH | SINGLE INDICATOR SECOND SCALE |
| 3EPM | ALL INDICATORS ALL SCALES |
| 3EPS | FIRST INDICATOR SINGLE SCALE |
| 3EPU | FIRST INDICATOR FIRST SCALE |
| 3EPX | SECOND INDICATOR SINGLE SCALE |
| 3EQA | SECOND INDICATOR SECOND SCALE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AJ20) | Reply |
| ME | AIR PRESSURE |
| MF | ALTITUDE |
| KC | BAR |
| BB | BRAKE MEAN EFFECTIVE PRESSURE |
| BC | BRAKE MEAN EFFECTIVE PRESSURE TORQUE PRESSURE |
| MG | COUNTER |
| MH | COUNTER TOTALIZING |
| JH | CUBIC FEET PER MINUTE |
| AQ | DECIBELS |
| EN | DECIBELS ABOVE OR BELOW ONE MILLIWATT |
| EP | DECIBELS ABOVE OR BELOW ONE WATT |
| BM | DEG CELSIUS |
| BN | DEG FAHRENHEIT |
| AS | DEGREES |
| MJ | DISPLAY CHANNEL NUMBER |
| MK | DISPLAY DIGIT RANGE |
| ML | EMPTY TO GALLONS FULL |
| MM | EMPTY TO POUNDS FULL |
| MN | ENGINE PRESSURE RATIO |
| MP | ENGINE REVOLUTIONS PER MINUTE |
| MQ | ENGINE TORQUE |
| MR | EXPANDED STANDING WAVE RATIO |
| MS | FATHOM |
| BP | FEET |
| MT | FEET ELEVATION |
| BR | FEET OF DEPTH |
| BX | FEET PER HOUR |
| HT | FEET PER MINUTE |
| HX | FEET PER SECOND |
| BY | FOOT POUNDS |
| MU | FUEL FLOW POUNDS PER HOUR |
| MV | FUEL FLOW RATE |
| MW | FUEL FLOW TOTALIZER |
| MX | FUEL PRESSURE |
| MY | FUNDAMENTAL FREQUENCY |
| BZ | GALLONS |
| MZ | GALLONS PER MINUTE |
| ER | GIGAHERTZ |
| ET | HERTZ |
| NA | HORSEPOWER |
| AW | INCHES |
| NB | INCH-POUNDS |
| FA | KILOHERTZ |
| CS | KNOTS |
| CT | KNOTS AIR SPEED |
| CW | KNOTS PER HOUR |
| NC | LATITUDE |
| CX | LITERS |
| ND | LONGITUDE |
| NE | MACH |
| FJ | MEGAHERTZ |
| DA | METERS |
| DC | MILES |
| DD | MILES PER HOUR |
| DE | MILES PER HOUR AIR SPEED |
| DG | MILLIMETERS |
| AG | MINUTE |
| NF | NAUTICAL MILES |
| KW | PARTS PER MILLION |
| AX | PERCENT |
| GM | PERCENT MODULATION |
| NG | PERCENT OF FLOW |
| NH | PERCENT OF LOWER LIMIT OF EXPLOSIBILITY |
| NJ | PERCENT REVOLUTIONS PER MINUTE |
| NK | PERCENT TORQUE |
| HM | PINTS |
| AY | POUNDS |
| NL | POUNDS PER HOUR |
| NM | POUNDS PER MINUTE |
| DQ | POUNDS PER SQUARE INCH |
| DW | PRESSURE |
| DX | PRESSURE RATIO |
| NN | PROPELLER REVOLUTIONS PER MINUTE |
| NP | QUARTS |
| LB | REVOLUTIONS PER MINUTE |
| NQ | REVOLUTIONS PER MINUTE EQUIVALENT TO 100 PERCENT |
| AH | SECOND |
| NR | STANDING WAVE RATIO |
| NS | TEMPERATURE |
| NT | TORQUE |
| EC | UNITS |
| NU | VOLT STANDING WAVE RATIO BOLOMETER BIAS |
| LD | VOLTS, ROOT MEAN SQUARE |
| LE | VOLTS, STANDING WAVE RATIO |
| EM | YARDS |
ASST*DPOINTER TYPE
INDICATES THE TYPE OF POINTER PROVIDED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ASST3EQNDAAM*;ASST3EQNDAAM$DAAC*;ASST3EQNDAAM$$DAAC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EQH | SINGLE POINTER |
| 3EQI | ALL POINTERS |
| 3EQJ | FIRST POINTER |
| 3EQK | SECOND POINTER |
| 3EQM | SINGLE REFERENCE POINTER |
| 3EQN | ALL REFERENCE POINTERS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AL97) | Reply |
| AAB | CLOCK-HAND |
| AAL | INDICATING |
| AAM | REFERENCE |
| AAC | SHUTTER |
ASSR*GPOINTER PURPOSE
THE FUNCTION FOR WHICH THE POINTER IS INTENDED.
Enter clear text.
(ASSRGCLEARTEXT)
BFQN*DDISPLAY TYPE
INDICATES THE TYPE OF DISPLAY PROVIDED.
Enter the applicable reply code from the table below
(BFQNDFJW)
| Table 1 |
| Reply Code (AK54) | Reply |
| FJW | LIGHT EMITTING DIODE (L.E.D.). |
| FJX | LIQUID CRYSTAL |
BFQP*ADISPLAY DIGIT QUANTITY
THE NUMBER OF DIGITS DISPLAYED.
Enter the alpha-numeric reply with a minimum of one character.
(BFQPAL5)
ASKN*GINDIVIDUAL MARKING
AN INDICATION OF THE INDIVIDUAL MARKING ON THE ITEM.
Enter clear text.
(ASKNGCLEARTEXT)
ASLC*DCOMMAND SIGN REPLACEABILITY
AN INDICATION OF WHETHER OR NOT THE COMMAND SIGN/S/ IS REPLACEABLE.
Enter the applicable reply code from the table below
(ASLCDC)
| Table 1 |
| Reply Code (AG84) | Reply |
| C | NONREPLACEABLE |
| B | REPLACEABLE |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3EQYDRE0000*;HUES3EQYDRE0000$DRE0081*;HUES3EQYDRE0000$$DRE0081*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EQQ | BACKGROUND OVERALL |
| 3EQR | BACKGROUND BASE |
| 3EQS | BACKGROUND TIP |
| 3EQU | POINTER OVERALL |
| 3EQW | POINTER TIP |
| 3EQY | MARKER OVERALL |
| 3EQZ | MARKER BASE |
| 3ERB | MARKER STRIPES |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| BL0000 | BLACK |
| BL0036 | BLACK, DULL |
| BL0001 | BLACK, FED STD 595, 17038 |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0039 | BLACK, LUSTERLESS |
| BU0000 | BLUE |
| CL0000 | CLEAR |
| GR0000 | GREEN |
| GR0079 | GREEN, MUNSELL |
| GR0035 | GREEN, PALE |
| RG0000 | ORANGE |
| RE0000 | RED |
| RE0081 | RED, AVIATION |
| RE0080 | RED, BLOOD |
| RE0077 | RED, DULL |
| WH0000 | WHITE |
| WH0034 | WHITE, DULL |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0019 | WHITE, OPAQUE |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
| YE0009 | YELLOW, PALE |
AWHH*DILLUMINATION COLOR GENERATION METHOD
THE MEANS BY WHICH THE ILLUMINATED COLOR IS GENERATED.
Enter the applicable reply code from the table below
(AWHHDBR*;AWHHDAZ$DAT*;AWHHDAZ$$DAT*)
| Table 1 |
| Reply Code (AL21) | Reply |
| AN | FLUORESCENCE |
| BQ | GREEN LENS |
| AP | INCANDESCENCE |
| BR | INTEGRAL LIGHT |
| AR | NATURAL LIGHT |
| AS | PHOSPHORESCENCE |
| AT | RADIOACTIVITY |
| AW | RED SOURCE |
| AX | RED SOURCE W/CLEAR WINDOW |
| AY | WHITE SOURCE |
| BP | WHITE SOURCE W/RED FILTER |
| AZ | WHITE SOURCE W/RED WINDOW |
ASPD*DPOINTER FINISH
AN INDICATION OF THE FINISH ON THE POINTER.
Enter the applicable reply code from the table below
(ASPDDAAC)
| Table 1 |
| Reply Code (AB54) | Reply |
| AAB | FLUORESCENT |
| AAE | LUMINOUS |
| AAD | NONLUMINOUS |
| AAC | PHOSPHORESCENT |
IF STYLE/REPLY CODE(s) C OR D WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (ACYR)
IF STYLE/REPLY CODE(s) B OR D WERE ENTERED FOR MRC ACDC, YOU MUST ANSWER MRC (ACYN and FAAZ and ACZB)
ACDCDCURRENT TYPE
INDICATES THE TYPE OF CURRENT WHETHER ALTERNATING,DIRECT,OR BOTH.
Enter the applicable reply code from the table below
(ACDCDD)
| Table 1 |
| Reply Code (AB62) | Reply |
| B | AC |
| D | AC/DC |
| C | DC |
ACYR*JDC VOLTAGE RATING
THE VALUE,OR RANGE OF VALUES,OF DIRECT CURRENT POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYRJMB2.0*;ACYRJMB2.0$$JMB2.1*)
| Table 1 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| M | MEGAVOLTS |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACYN*JAC VOLTAGE RATING
THE VALUE,OR RANGE OF VALUES,OF ROOT MEAN SQUARE POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYNJVC2.0*;ACYNJVC2.0$$JVC2.1*)
| Table 1 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| M | MEGAVOLTS |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDA*;FAAZDB$DC*)
| Table 1 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| C | THREE |
| B | TWO |
ACZB*JFREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACZBJGB2.0*;ACZBJGB2.0$$JGB2.1*)
| Table 1 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMND*JINPUT IMPEDANCE RATING
THE TOTAL OPPOSITION (RESISTIVE AND REACTIVE) PRESENTED BY THE ITEM TO AN ALTERNATING CURRENT SOURCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMNDJMRA2.0*;AMNDJMRA2.0$$JMRA2.1*)
| Table 1 |
| Reply Code (AE75) | Reply |
| GF | GIGOHMS |
| KR | KILOHMS |
| MR | MEGOHMS |
| QR | OHMS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) ACQ OR AHF WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (ABTB and ANRL)
IF STYLE/REPLY CODE(s) AAE OR AET WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (BLKZ and ADAG and ANRL)
IF STYLE/REPLY CODE(s) BCX WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (ANRL)
AXHR*JMOUNTING FACILITY TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF FACILITIES BY WHICH THE ITEM IS MOUNTED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(AXHRJAQY2*;AXHRJAQY2$$JAQY3*;AXHRJAQY2$JAQY2*)
| Table 1 |
| Reply Code (AM39) | Reply |
| ABB | BASE |
| APY | BENCH |
| ABC | BRACKET(S) |
| BJY | BULKHEAD |
| ABD | BUSHING |
| ABF | CASE |
| ABH | CLAMP |
| AFL | CLIP |
| BMW | CONSOLE |
| ACR | FLANGE |
| AGQ | FLUSH |
| BXY | GIMBAL RING |
| AGC | HINGE |
| AED | PANEL |
| ASL | PEDESTAL |
| BXZ | PELORUS STAND |
| ABP | PLUG-IN |
| ABR | RACK |
| ABW | SCREW |
| AQY | SEMIFLUSH |
| BYC | SHOCK MOUNT(S) |
| BCX | SLOTTED HOLE |
| AJF | SNAP FASTENER(S) |
| AJM | STAND |
| AAE | STUD(S) |
| AEG | SURFACE |
| AKY | THREADED BEZEL |
| AFA | THREADED BUSHING |
| BYA | THREADED CASE |
| AHF | THREADED HOLE(S) |
| AET | THREADED STUD(S) |
| BYB | U-CHANNEL |
| ACQ | UNTHREADED HOLE(S) |
ABTB*JMOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTBJAB2.0*;ABTBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BLKZ*JMOUNTING STUD DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING STUD,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BLKZJAC2.0*;BLKZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAG*JMOUNTING STUD LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE MOUNTING STUD,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAGJAB2.0*;ADAGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AEJN)
IF STYLE/REPLY CODE(s) 2 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (ABKR and AFDT and ABKQ)
IF STYLE/REPLY CODE(s) 3, 8 OR 9 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (ABKR and ABKQ)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (ABKR and AFDW)
IF STYLE/REPLY CODE(s) 5, 6 OR 7 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AFFL)
ANRL*LMOUNTING ARRANGEMENT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE ARRANGEMENT OF THE MOUNTING.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ANRLL8)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAD1272 | 1 | TWO HOLE/STUD |
| AAD1273 | 2 | THREE HOLE/STUD TRIANGULAR |
| AAD1274 | 3 | FOUR HOLE/STUD RECTANGULAR/SQUARE |
| AAD1275 | 4 | SIX HOLE/STUD RECTANGULAR/SQUARE |
| AAD1276 | 5 | THREE HOLE/STUD BOLT CIRCLE |
| AAD1277 | 6 | FOUR HOLE/STUD BOLT CIRCLE |
| AAD1278 | 7 | SIX HOLE/STUD BOLT CIRCLE |
| AAD1279 | 8 | FOUR SLOT RECTANGULAR/SQUARE OPEN ENDS |
| AAD1280 | 9 | FOUR SLOT RECTANGULAR/SQUARE |
ABKQ*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
THE DISTANCE BETWEEN THE CENTER OF ONE MOUNTING FACILITY AND THE CENTER OF THE ADJACENT MOUNTING FACILITY PARALLEL TO THE LENGTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKQJAA2.0*;ABKQJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKR*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
THE DISTANCE BETWEEN THE CENTER OF ONE MOUNTING FACILITY AND THE CENTER OF THE ADJACENT MOUNTING FACILITY PARALLEL TO THE WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKRJAB2.0*;ABKRJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEJN*JDISTANCE BETWEEN MOUNTING FACILITY CENTERS
THE DISTANCE BETWEEN MOUNTING FACILITY CENTERS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJNJAB2.0*;AEJNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDT*JSHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS
THE SHORTEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE HORIZONTAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDTJAC2.0*;AFDTJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDW*JSHORTEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS
THE SHORTEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE VERTICAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDWJAA2.0*;AFDWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFFL*JMOUNTING BOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFFLJAA2.0*;AFFLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAC2.0*;ABRYJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAB2.0*;ABGLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMZ*JDIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMZJAB2.0*;ABMZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HGTH*JHEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN OBJECT,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(HGTHJAC2.0*;HGTHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEJZ*JDEPTH
A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJZJAC2.0*;AEJZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CXQH*JDIAL OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE DIAL,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXQHJAB2.0*;CXQHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCWP*;CBBLDCFY$DCXB*;CBBLDCFY$$DCXB*)
| Table 1 |
| Reply Code (AN47) | Reply |
| BGA | ADAPTER |
| CWB | ASPIRATOR BULB |
| CWC | BELL SIGNAL |
| CWD | BEZEL |
| CWE | CALIBRATION CHART |
| CWF | CARRYING CASE WITH STRAP |
| CWG | CHARCOAL CARTRIDGE |
| CWH | COAXIAL ADAPTER |
| CWJ | COIL |
| BEM | COVER |
| CWK | CRYSTAL |
| CWL | DECAL |
| CWM | DIFFUSION RING |
| CWN | DILUTION VALVE |
| CCD | DRY CELL BATTERY |
| CWP | DUMMY LOAD |
| BNM | ENCAPSULATED |
| CWQ | EXCESSIVE OVER-TEMPERATURE SIGNAL |
| CWR | FILAMENT |
| BJE | FORDING FEATURE |
| CEG | HANDHELD |
| AQK | HANDLE |
| CWS | HEAT SINK |
| AAH | HERMETICALLY SEALED CASE |
| CWT | HOSE CLAMP COUPLING |
| CWU | HOSE COUPLING NUT |
| CWV | HOSE COUPLING SLEEVE |
| CCH | INCANDESCENT LAMP |
| CCJ | INSTRUCTION MANUAL |
| CWW | INTEGRAL SYNCHROSCOPE |
| DLP | INTERNAL POWER PACK |
| CWX | KNURLED RING |
| CWY | LAMP SOCKET |
| CWZ | LINE TRAP |
| CXA | LOW PASS FILTER |
| ABH | MARKER STRIP |
| AAJ | MOUNTING HARDWARE |
| EUS | NIGHT VISION COMPATIBILITY |
| CXB | PACKING O-RING |
| CXC | PITOT PRESSURE INSERT |
| CFY | PORTABLE |
| CXD | POWER SUPPLY |
| CXE | PROBE TUBE |
| ALS | PROTECTIVE CAP |
| CXF | RADIO FREQUENCY PROBE ADAPTER |
| CXG | REFERENCE INDEX SETTING |
| CXH | RESET TYPE VOLTAGE ADAPTER |
| CXJ | RESISTOR TYPE VOLTAGE ADAPTER |
| CXK | RETAINING RING |
| CXL | REVOLUTION COUNTER |
| CXM | SAMPLING LINE |
| CXN | SELECTOR SWITCH |
| CXP | STABILIZER |
| CXQ | STATIC PRESSURE INSERT |
| CXR | SYNCHRO MOUNTING CLAMP |
| CXS | TECHNICAL MANUAL |
| BMS | WATERPROOF |
| CXT | WAVEGUIDE PROBE |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAJ0)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
SCMA*DSCALE MARKING
AN INDICATION OF THE MARKING(S) ON THE SCALE.
Enter the applicable reply code from the table below
(SCMADAAB*;SCMADAAC$DABL*;SCMADAAC$$DABL*)
| Table 1 |
| Reply Code (AJ65) | Reply |
| ABL | CROSS MARKING |
| AAB | DOTS |
| AAC | LETTERS |
| AAG | LINED INCREMENTS |
| AAH | MAJOR GRADUATION |
| AAJ | MINOR GRADUATION |
| AAF | NUMERALS |
SMTP*DSCALE MARKING TRANSPARENCY
THE CHARACTERISTIC OF THE SCALE MARKING(S) TO TRANSMIT LIGHT AND ALLOW VISUAL PERCEPTION.
Enter the applicable reply code from the table below
(SMTPDRA*;SMTPDPP$DAN*;SMTPDPP$$DAN*)
| Table 1 |
| Reply Code (AF93) | Reply |
| AN | FLUORESCENT |
| LU | LUMINOUS |
| NL | NONLUMINOUS |
| PP | PHOSPHORESCENT |
| RA | RADIOACTIVE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information