A streamlined item designed to produce a smooth outline and to reduce drag or air resistance. It is shaped to rise vertically along the body of a guided missile or rocket. Do not use if a more specific name applies. Excludes:FAIRING, ROCKET MOTOR; FAIRING, ROCKET ENGINE, GUIDED MISSILE; and FAIRING, GUIDED MISSILE TUNNEL SECTION. See also COVER, ACCESS, GUIDED MISSILE.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED38554*)
AMQY*DINSTALLATION DESIGN
THE INSTALLATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AMQYDAJ)
| Table 1 |
| Reply Code (AJ17) | Reply |
| AJ | FIXED |
| ER | REMOVABLE |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDPCZ000*;MATTDPCBY00$DPCAK00*;MATTDPCBY00$$DPCAK00*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ADA000 | ADHESIVE |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| CRA000 | CHROMIUM |
| CRB000 | CHROMIUM ALLOY |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CKA000 | CORK |
| CCA000 | COTTON |
| LBF000 | DISULFIDE MOLYBDENUM |
| FBS000 | FIBER SYNTHETIC |
| WDA000 | FIBERBOARD |
| GSA000 | GLASS |
| GSE000 | GLASS BOROSILICATE |
| GSB000 | GLASS FIBER |
| GSH000 | GLASS PLATE |
| GSG000 | GLASS SAFETY |
| GSL000 | GLASS SHEET |
| GSM000 | GLASS WIRED |
| AUA000 | GOLD |
| AUB000 | GOLD ALLOY |
| GFA000 | GRAPHITE |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| FEB000 | IRON CAST |
| FED000 | IRON CAST ALLOY |
| FEH000 | IRON CAST MALLEABLE |
| FEJ000 | IRON DUCTILE |
| FEC000 | IRON MALLEABLE |
| PBA000 | LEAD |
| PBB000 | LEAD ALLOY |
| LRA000 | LEATHER |
| MGB000 | MAGNESIUM ALLOY |
| MBA000 | MOLYBDENUM |
| MBB000 | MOLYBDENUM ALLOY |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCD000 | PLASTIC ACRYLIC |
| PCAX00 | PLASTIC ACRYLONITRILE |
| PCE000 | PLASTIC ALKYD |
| PCCX00 | PLASTIC ARAMID |
| PCCK00 | PLASTIC CELLULOSE |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCBJ00 | PLASTIC CELLULOSE NITRATE |
| PCAAN0 | PLASTIC CELLULOSE PROPIONATE |
| PCAAB0 | PLASTIC CELLULOSE TRIACETATE |
| PCG000 | PLASTIC DIALLYL PHTHALATE |
| PCH000 | PLASTIC EPOXY |
| PCCR00 | PLASTIC EPOXY FORMALDEHYDE |
| PCBY00 | PLASTIC ETHYL CELLULOSE |
| PCAAC0 | PLASTIC FLUORINATED ETHYLENE |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PCAAE0 | PLASTIC FLUOROSILICONE |
| PCAAR0 | PLASTIC FURANE |
| PCJ000 | PLASTIC MELAMINE |
| PCBB00 | PLASTIC METHACRYLATE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCCZ00 | PLASTIC POLYALKENE |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCQ000 | PLASTIC POLYCAPROLACTAM |
| PCR000 | PLASTIC POLYCARBONATE |
| PCS000 | PLASTIC POLYCHLOROFLUOROETHYLENE |
| PCT000 | PLASTIC POLYCHLOROTRIFLUOROETHYLENE |
| PCW000 | PLASTIC POLYESTER |
| PCBS00 | PLASTIC POLYETHER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAM00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCAA00 | PLASTIC POLYHEXAMETHYLENE SEBACAMIDE |
| PCCH00 | PLASTIC POLYIMIDE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAAAB | PLASTIC POLYUNDECANOAMIDE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCCD00 | PLASTIC POLYVINYL |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCCC00 | PLASTIC POLYVINYL CHLORIDE-ACETATE |
| PCCP00 | PLASTIC POLYVINYL CHLORIDE-NITRILE |
| PCCE00 | PLASTIC POLYVINYL ETHER |
| PCBT00 | PLASTIC POLYVINYL FLUORIDE |
| PCCJ00 | PLASTIC POLYVINYL PHENOLIC |
| PCBW00 | PLASTIC POLYVINYLIDENE |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAS00 | PLASTIC POLYVINYLIDENE FLUORIDE |
| PCAK00 | PLASTIC SILICONE |
| PCBC00 | PLASTIC STYRENE |
| PCAAF0 | PLASTIC STYRENE-BUTADIENE |
| PCAAX0 | PLASTIC UREA-FORMALDEHYDE |
| PCBA00 | PLASTIC URETHANE |
| PCAP00 | PLASTIC VINYL |
| PCAAA0 | PLASTIC VINYL ACETATE |
| PCBD00 | PLASTIC VINYL CHLORIDE |
| PCAT00 | PLASTIC VINYLIDENE CHLORIDE |
| PCBX00 | PLASTIC VINYLIDENE FLUORIDE |
| PTA000 | PLATINUM |
| PTB000 | PLATINUM ALLOY |
| WDB000 | PLYWOOD |
| RSD000 | RESIN |
| RSC000 | RESIN NATURAL |
| RSB000 | RESIN SILICONE |
| RSA000 | RESIN SYNTHETIC |
| RCE000 | RUBBER |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RCA000 | RUBBER NATURAL |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| AGA000 | SILVER |
| AGF000 | SILVER ALLOY |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| SNB000 | TIN |
| SNA000 | TIN ALLOY |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| VNA000 | VANADIUM |
| VNB000 | VANADIUM ALLOY |
| WDC000 | WOOD |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDBR0000*;HUESDRE0000$DBU0000*;HUESDRE0000$$DBU0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| VY0000 | IVORY |
| RG0000 | ORANGE |
| RE0000 | RED |
| TA0000 | TAN |
| VL0000 | VIOLET |
| WH0000 | WHITE |
| YE0000 | YELLOW |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDPCAF00*;SFTTDPNE000$DMSL000*;SFTTDPNE000$$DMSL000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| MSL000 | ALODIZE |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CLB000 | CERAMIC |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| DCA000 | DICHROMATE |
| LCE000 | DISULFIDE MOLYBDENUM |
| ENA000 | ENAMEL |
| ENJ000 | ENAMEL ALKYD |
| ENB000 | ENAMEL LUSTERLESS |
| ENF000 | ENAMEL SEMIGLOSS |
| AUA000 | GOLD |
| LQA000 | LACQUER |
| LQD000 | LACQUER ACRYLIC |
| MNA000 | MANGANESE |
| MTB000 | MOLYBDENUM |
| NLA000 | NICKEL |
| NLD000 | NICKEL SULFAMATE |
| XXB000 | OXIDE |
| XXF000 | OXIDE ALUMINUM |
| XXD000 | OXIDE ZINC |
| PNA000 | PAINT |
| PNC000 | PAINT ALUMINUM |
| PND000 | PAINT EPOXY |
| PNG000 | PAINT LUSTERLESS |
| PNE000 | PAINT POLYURETHANE |
| PNF000 | PAINT VINYL ALKYD |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHB000 | PHOSPHATE IRON |
| PHC000 | PHOSPHATE MANGANESE |
| PHE000 | PHOSPHATE NICKEL |
| PHD000 | PHOSPHATE ZINC |
| PCA000 | PLASTIC |
| PCK000 | PLASTIC ACRYLIC |
| PCS000 | PLASTIC EPOXY |
| PCAF00 | PLASTIC EPOXY FORMALDEHYDE |
| PCAD00 | PLASTIC EPOXY POLYAMIDE |
| PCM000 | PLASTIC PHENOLIC |
| PCF000 | PLASTIC POLYAMIDE |
| PCAH00 | PLASTIC POLYESTER |
| PCAC00 | PLASTIC POLYETHYLENE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCY000 | PLASTIC POLYURETHANE |
| PCC000 | PLASTIC POLYVINYL CHLORIDE |
| PTA000 | PLATINUM |
| CLC000 | PORCELAIN |
| PRA000 | PRIMER |
| PRF000 | PRIMER EPOXY |
| PRD000 | PRIMER EPOXY-POLYAMIDE |
| PRE000 | PRIMER ZINC |
| PRC000 | PRIMER ZINC CHROMATE |
| RSA000 | RESIN SILICONE |
| RSB000 | RESIN SYNTHETIC |
| RCA000 | RUBBER |
| RCB000 | RUBBER SYNTHETIC |
| MSA000 | SHELLAC |
| SLA000 | SILICON |
| AGA000 | SILVER |
| LCD000 | SULFIDE MOLYBDENUM |
| SNA000 | TIN |
| TTA000 | TITANIUM |
| TNA000 | TUNGSTEN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
AAXX*DMOUNTING TYPE
INDICATES THE TYPE OF MOUNT UTILIZED TO SUPPORT THE ITEM.
Enter the applicable reply code from the table below
(AAXXDAFS)
| Table 1 |
| Reply Code (AA78) | Reply |
| AAS | FUSELAGE |
| AFS | PYLON |
| AAT | WING |
AYQM*DMOUNTING LOCATION
INDICATES THE MOUNTING LOCATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AYQMDBAT)
| Table 1 |
| Reply Code (AJ91) | Reply |
| BAS | BOTH WINGS |
| BAT | LEFT WING |
| BAW | RIGHT WING |
BCRB*DMISSILE LAUNCHING METHOD
THE MEANS PROVIDED FOR MISSILE LAUNCHING.
Enter the applicable reply code from the table below
(BCRBDAAW)
| Table 1 |
| Reply Code (AL78) | Reply |
| AAS | EJECTED |
| AAW | FORWARD TRAVEL ALONG SIDE RAILS |
| AAT | RELEASED |
BCWT*DMISSILE TYPE FOR WHICH DESIGNED
INDICATES THE TYPE OF MISSILE FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BCWTDAAB)
| Table 1 |
| Reply Code (AM92) | Reply |
| AAY | ADM-20C |
| AAB | AGM 12-B |
| ABM | AGM-136A |
| ABG | AGM-45 |
| ABH | AGM-65 D/E |
| AAZ | AGM-65A |
| ABJ | AGM-69 |
| ABK | AGM-86 |
| ABL | AGM-88 |
| AAK | AIM 26-A/B |
| AAF | AIM 4 E/F |
| ABR | AIM-120 |
| ABS | AIM-130 |
| ABA | AIM-4D |
| ABN | AIM-7F |
| ABP | AIM-7M |
| ABB | AIM-9B |
| ABQ | AIM-9L/M |
| ACA | ASM DM201 |
| ABZ | ASM DM61/71 |
| AAM | ASM-N-10 |
| AAL | ASM-N-7A |
BCQYDAIRCRAFT TYPE FOR WHICH DESIGNED
INDICATES THE TYPE OF AIRCRAFT FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BCQYDAAC)
| Table 1 |
| Reply Code (AM91) | Reply |
| AAB | FIXED WING |
| AAC | ROTARY WING |
CYEPAAIRCRAFT MODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE AIRCRAFT.
Enter the alpha-numeric reply with a minimum of one character.
(CYEPAF8)
BWJF*DSIDE FOR WHICH DESIGNED
AN INDICATION OF THE SIDE FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BWJFDACR)
| Table 1 |
| Reply Code (AJ91) | Reply |
| ADC | BOTH SIDES |
| ACF | LEFT SIDE |
| ACR | RIGHT SIDE |
CZEKAAIRCRAFT MISSION DESIGN SERIES
THE SERIES OF LETTERS AND NUMBERS WHICH IDENTIFY THE BASIC AIRCRAFT MISSION AND ANY ADDITIONAL MODIFICATION OR DESIGN CHANGES.
Enter the alpha-numeric reply with a minimum of one character.
(CZEKAF5)
AARN*DFABRICATION METHOD
THE PROCESS USED IN MANUFACTURING THE ITEM.
Enter the applicable reply code from the table below
(AARNDLB)
| Table 1 |
| Reply Code (AA62) | Reply |
| AN | CAST |
| AP | CELLULAR, EXPLODED |
| AQ | CELLULAR, UNEXPLODED |
| KZ | COMPOSITE |
| AD | CORRUGATED |
| DE | DROP FORGED |
| DZ | GROUND |
| LB | HONEYCOMB |
| AT | LAMINATED |
| AZ | MACHINED |
| AM | MOLDED |
| LC | SANDWICH |
| AL | STAMPED |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABPX*JMATERIAL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE MATERIAL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABPXJAC2.0*;ABPXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDBQS)
| Table 1 |
| Reply Code (AB28) | Reply |
| BQP | ANGLE |
| BKY | BEARING |
| ABR | BOLT |
| AYH | BRACE |
| ABS | BRACKET |
| AJM | BUSHING |
| AEL | CAP |
| AYK | CHANNEL |
| AMN | CLAMP |
| ASX | CLIP |
| ATF | COLLAR |
| BCA | COTTER PIN |
| BRF | CUSHION |
| ARF | ELECTRICAL CONNECTOR COVER |
| BCC | EYEBOLT |
| ACN | GASKET |
| ADM | GROMMET |
| BQW | HINGE |
| BCJ | HOOK |
| AJR | INSERT |
| BRD | LOCK BOLT |
| ACB | LOCK WASHER |
| ADW | LOCKNUT |
| BRE | LUG |
| AEK | MOUNTING BRACKET |
| AAN | MOUNTING NUT |
| ABW | NUT |
| BQS | NUT PLATE |
| ABY | PIN |
| ATB | PLATE |
| BGG | RETAINER |
| ATC | RIVET |
| AMX | SCREW |
| AFH | SEAL |
| BPQ | SHIM |
| ATD | SPACER |
| AMY | SPRING |
| ABJ | STORAGE CASE |
| AFN | STUD |
| BAW | SUPPORT |
| AJW | WASHER |
| ADA | WRENCH |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFVN)
| Table 1 |
| Reply Code (AN47) | Reply |
| BSZ | ELECTROSTATIC SENSITIVE |
| FVN | FRAMED |
| FVP | NOT FRAMED |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
AFJN*DFRAGILITY FACTOR
THE MEASURE OF SENSITIVITY OF THE ITEM TO BE PACKAGED. A FACTOR USED BY PACKAGING ENGINEERS IN DEVISING PROPER CUSHIONING IN A PACKAGE.
Enter the applicable reply code from the table below
(AFJNDF)
| Table 1 |
| Reply Code (AD40) | Reply |
| E | MODERATELY DELICATE |
| F | MODERATELY RUGGED |
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDREA000*;PRMTDRTA000$$DIRA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| REA000 | RHENIUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAZA000E2.0*;PMWTJAZA000E2.0$$JAZA000E2.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
| Table 2 |
| Reply Code (AG14) | Reply |
| E | GRAINS, TROY |
| R | GRAMS |
| F | OUNCES, TROY |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJIRA0002.0*;PMLCJIRA0002.0$JIRA0002.0*;PMLCJIRA0002.0$$JIRA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ANNYAQUANTITY WITHIN EACH IMMEDIATE CONTAINER
THE NUMBER OF ITEMS WITHIN EACH IMMEDIATE CONTAINER.
Enter the alpha-numeric reply with a minimum of one character.
(ANNYAM5)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ519*;HZRDDHAZ498$$DHAZ579*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ383 | ACTINIUM-227 |
| HAZ384 | ACTINIUM-228 |
| HAZ385 | AMERICIUM-241 |
| HAZ386 | AMERICIUM-243 |
| HAZ387 | ANTIMONY-122 |
| HAZ388 | ANTIMONY-124 |
| HAZ389 | ANTIMONY-125 |
| HAZ390 | ARGON-37 |
| HAZ391 | ARGON-41 |
| HAZ392 | ARGON-41, UNCOMPRESSED |
| HAZ393 | ARSENIC-73 |
| HAZ394 | ARSENIC-74 |
| HAZ395 | ARSENIC-76 |
| HAZ396 | ARSENIC-77 |
| HAZ042 | ASBESTOS |
| HAZ397 | ASTATINE-211 |
| HAZ398 | BARIUM-131 |
| HAZ399 | BARIUM-133 |
| HAZ400 | BARIUM-140 |
| HAZ401 | BERKELIUM-249 |
| HAZ402 | BERYLLIUM-7 |
| HAZ403 | BISMUTH-206 |
| HAZ404 | BISMUTH-207 |
| HAZ405 | BISMUTH-210 |
| HAZ406 | BISMUTH-212 |
| HAZ407 | BROMINE-82 |
| HAZ408 | CADMIUM-109 |
| HAZ410 | CADMIUM-115 |
| HAZ409 | CADMIUM-115M |
| HAZ411 | CALCIUM-45 |
| HAZ412 | CALCIUM-47 |
| HAZ413 | CALIFORNIUM-249 |
| HAZ414 | CALIFORNIUM-250 |
| HAZ415 | CALIFORNIUM-252 |
| HAZ416 | CARBON-14 |
| HAZ417 | CERIUM-141 |
| HAZ418 | CERIUM-143 |
| HAZ419 | CERIUM-144 |
| HAZ420 | CESIUM-131 |
| HAZ422 | CESIUM-134 |
| HAZ421 | CESIUM-134M |
| HAZ423 | CESIUM-135 |
| HAZ424 | CESIUM-136 |
| HAZ425 | CESIUM-137 |
| HAZ426 | CHLORINE-36 |
| HAZ427 | CHLORINE-38 |
| HAZ428 | CHROMIUM-51 |
| HAZ429 | COBALT-56 |
| HAZ430 | COBALT-57 |
| HAZ432 | COBALT-58 |
| HAZ431 | COBALT-58M |
| HAZ433 | COBALT-60 |
| HAZ434 | COPPER-64 |
| HAZ435 | CURIUM-242 |
| HAZ436 | CURIUM-243 |
| HAZ437 | CURIUM-244 |
| HAZ438 | CURIUM-245 |
| HAZ439 | CURIUM-246 |
| HAZ440 | DYSPROSIUM-154 |
| HAZ441 | DYSPROSIUM-165 |
| HAZ442 | DYSPROSIUM-166 |
| HAZ443 | ERBIUM-169 |
| HAZ444 | ERBIUM-171 |
| HAZ043 | ETHYLENE GYLCOL |
| HAZ445 | EUROPIUM-150 |
| HAZ447 | EUROPIUM-152 |
| HAZ446 | EUROPIUM-152M |
| HAZ448 | EUROPIUM-154 |
| HAZ449 | EUROPIUM-155 |
| HAZ450 | FLUORINE-18 |
| HAZ451 | GADOLINIUM-153 |
| HAZ452 | GADOLINIUM-159 |
| HAZ453 | GALLIUM-67 |
| HAZ454 | GALLIUM-72 |
| HAZ455 | GERMANIUM-71 |
| HAZ456 | GOLD-193 |
| HAZ457 | GOLD-194 |
| HAZ458 | GOLD-195 |
| HAZ459 | GOLD-196 |
| HAZ460 | GOLD-198 |
| HAZ461 | GOLD-199 |
| HAZ462 | HAFNIUM-181 |
| HAZ463 | HOLMIUM-166 |
| HAZ464 | INDIUM-113M |
| HAZ465 | INDIUM-114M |
| HAZ467 | INDIUM-115 |
| HAZ466 | INDIUM-115M |
| HAZ468 | IODINE-124 |
| HAZ469 | IODINE-125 |
| HAZ470 | IODINE-126 |
| HAZ471 | IODINE-129 |
| HAZ472 | IODINE-131 |
| HAZ473 | IODINE-132 |
| HAZ474 | IODINE-133 |
| HAZ475 | IODINE-134 |
| HAZ476 | IODINE-135 |
| HAZ477 | IRIDIUM-190 |
| HAZ478 | IRIDIUM-192 |
| HAZ479 | IRIDIUM-194 |
| HAZ480 | IRON-55 |
| HAZ481 | IRON-59 |
| HAZ484 | KRYPTON-85 |
| HAZ485 | KRYPTON-85, UNCOMPRESSED |
| HAZ482 | KRYPTON-85M |
| HAZ483 | KRYPTON-85M, UNCOMPRESSED |
| HAZ486 | KRYPTON-87 |
| HAZ487 | KRYPTON-87, UNCOMPRESSED |
| HAZ488 | LANTHANUM-140 |
| HAZ489 | LEAD-203 |
| HAZ490 | LEAD-210 |
| HAZ491 | LEAD-212 |
| HAZ492 | LUTECIUM-172 |
| HAZ493 | LUTECIUM-177 |
| HAZ092 | MAGNESIUM |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ494 | MAGNESIUM-28 |
| HAZ495 | MANGANESE-52 |
| HAZ496 | MANGANESE-54 |
| HAZ497 | MANGANESE-56 |
| HAZ499 | MERCURY-197 |
| HAZ498 | MERCURY-197M |
| HAZ500 | MERCURY-203 |
| HAZ501 | MOLYBDENUM-99 |
| HAZ502 | NEODYMIUM-147 |
| HAZ503 | NEODYMIUM-149 |
| HAZ504 | NEPTUNIUM-237 |
| HAZ505 | NEPTUNIUM-239 |
| HAZ506 | NICKEL-56 |
| HAZ507 | NICKEL-59 |
| HAZ508 | NICKEL-63 |
| HAZ509 | NICKEL-65 |
| HAZ510 | NIOBIUM-93M |
| HAZ511 | NIOBIUM-95 |
| HAZ512 | NIOBIUM-97 |
| HAZ513 | OSMIUM-185 |
| HAZ515 | OSMIUM-191 |
| HAZ514 | OSMIUM-191M |
| HAZ516 | OSMIUM-193 |
| HAZ517 | PALLADIUM-103 |
| HAZ518 | PALLADIUM-109 |
| HAZ059 | PHOSPHORUS P-32 |
| HAZ519 | PLATINUM-191 |
| HAZ520 | PLATINUM-193 |
| HAZ521 | PLATINUM-193M |
| HAZ523 | PLATINUM-197 |
| HAZ522 | PLATINUM-197M |
| HAZ524 | PLUTONIUM-238 |
| HAZ525 | PLUTONIUM-239 |
| HAZ526 | PLUTONIUM-240 |
| HAZ527 | PLUTONIUM-241 |
| HAZ528 | PLUTONIUM-242 |
| HAZ529 | POLONIUM-210 |
| HAZ530 | POTASSIUM-42 |
| HAZ531 | POTASSIUM-43 |
| HAZ532 | PRASEODYMIUM-142 |
| HAZ533 | PRASEODYMIUM-143 |
| HAZ534 | PROMETHIUM-147 |
| HAZ535 | PROMETHIUM-149 |
| HAZ536 | PROTACTINIUM-230 |
| HAZ537 | PROTACTINIUM-231 |
| HAZ538 | PROTACTINIUM-233 |
| HAZ055 | RADIUM 223 |
| HAZ056 | RADIUM 224 |
| HAZ057 | RADIUM 226 |
| HAZ058 | RADIUM 228 |
| HAZ539 | RADON-220 |
| HAZ540 | RADON-222 |
| HAZ541 | RHENIUM-183 |
| HAZ542 | RHENIUM-186 |
| HAZ543 | RHENIUM-187 |
| HAZ544 | RHENIUM-188 |
| HAZ545 | RHODIUM-103M |
| HAZ546 | RHODIUM-105 |
| HAZ547 | RUBIDIUM-86 |
| HAZ548 | RUBIDIUM-87 |
| HAZ550 | RUTHENIUM-103 |
| HAZ551 | RUTHENIUM-105 |
| HAZ552 | RUTHENIUM-106 |
| HAZ549 | RUTHENIUM-97 |
| HAZ553 | SAMARIUM-145 |
| HAZ554 | SAMARIUM-147 |
| HAZ555 | SAMARIUM-151 |
| HAZ556 | SAMARIUM-153 |
| HAZ557 | SCANDIUM-46 |
| HAZ558 | SCANDIUM-47 |
| HAZ559 | SCANDIUM-48 |
| HAZ560 | SELENIUM-75 |
| HAZ561 | SILICON-31 |
| HAZ562 | SILVER-105 |
| HAZ563 | SILVER-110M |
| HAZ564 | SILVER-111 |
| HAZ565 | SODIUM-22 |
| HAZ566 | SODIUM-24 |
| HAZ568 | STRONTIUM-85 |
| HAZ567 | STRONTIUM-85M |
| HAZ569 | STRONTIUM-89 |
| HAZ570 | STRONTIUM-90 |
| HAZ571 | STRONTIUM-91 |
| HAZ572 | STRONTIUM-92 |
| HAZ573 | SULPHUR-35 |
| HAZ574 | TANTALUM-182 |
| HAZ576 | TECHNETIUM-96 |
| HAZ575 | TECHNETIUM-96M |
| HAZ578 | TECHNETIUM-97 |
| HAZ577 | TECHNETIUM-97M |
| HAZ580 | TECHNETIUM-99 |
| HAZ579 | TECHNETIUM-99M |
| HAZ581 | TELLURIUM-125M |
| HAZ583 | TELLURIUM-127 |
| HAZ582 | TELLURIUM-127M |
| HAZ585 | TELLURIUM-129 |
| HAZ584 | TELLURIUM-129M |
| HAZ586 | TELLURIUM-131M |
| HAZ587 | TELLURIUM-132 |
| HAZ588 | TERBIUM-160 |
| HAZ589 | THALLIUM-200 |
| HAZ590 | THALLIUM-201 |
| HAZ591 | THALLIUM-202 |
| HAZ592 | THALLIUM-204 |
| HAZ593 | THORIUM-227 |
| HAZ594 | THORIUM-228 |
| HAZ595 | THORIUM-230 |
| HAZ596 | THORIUM-231 |
| HAZ597 | THORIUM-232 |
| HAZ598 | THORIUM-234 |
| HAZ599 | THORIUM-NATURAL |
| HAZ600 | THULIUM-168 |
| HAZ601 | THULIUM-170 |
| HAZ602 | THULIUM-171 |
| HAZ603 | TIN-113 |
| HAZ604 | TIN-117M |
| HAZ605 | TIN-121 |
| HAZ606 | TIN-125 |
| HAZ607 | TUNGSTEN-181 |
| HAZ608 | TUNGSTEN-185 |
| HAZ609 | TUNGSTEN-187 |
| HAZ610 | URANIUM-230 |
| HAZ611 | URANIUM-232 |
| HAZ612 | URANIUM-233 |
| HAZ613 | URANIUM-234 |
| HAZ614 | URANIUM-235 |
| HAZ615 | URANIUM-236 |
| HAZ616 | URANIUM-238 |
| HAZ619 | URANIUM-DEPLETED |
| HAZ618 | URANIUM-ENRICHED |
| HAZ617 | URANIUM-NATURAL |
| HAZ620 | VANADIUM-48 |
| HAZ621 | VANADIUM-49 |
| HAZ622 | XENON-125 |
| HAZ623 | XENON-131M |
| HAZ624 | XENON-131M, UNCOMPRESSED |
| HAZ625 | XENON-133 |
| HAZ626 | XENON-133, UNCOMPRESSED |
| HAZ627 | XENON-135 |
| HAZ628 | XENON-135, UNCOMPRESSED |
| HAZ629 | YTTERBIUM-175 |
| HAZ630 | YTTRIUM-88 |
| HAZ631 | YTTRIUM-90 |
| HAZ633 | YTTRIUM-91 |
| HAZ632 | YTTRIUM-91M |
| HAZ634 | YTTRIUM-92 |
| HAZ635 | YTTRIUM-93 |
| HAZ052 | ZINC |
| HAZ636 | ZINC-65 |
| HAZ638 | ZINC-69 |
| HAZ637 | ZINC-69M |
| HAZ639 | ZIRCONIUM-93 |
| HAZ640 | ZIRCONIUM-95 |
| HAZ641 | ZIRCONIUM-97 |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information