Table 1
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	ALB000	ALUMINUM ALLOY
	CUB000	COPPER ALLOY
	FEA000	IRON
	NLB000	NICKEL ALLOY
	STA000	STEEL
	STB000	STEEL CORROSION RESISTING

ABHPJOVERALL LENGTH

THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

APGF*DDESIGN TYPE

INDICATES THE DESIGN TYPE OF THE ITEM.

Enter the applicable reply code from the table below

(APGFDCHK*;APGFDCCD$$DDLL*)

Table 1
	Reply Code (AK54)	Reply
	CCD	OPEN END CYLINDRICAL
	DLL	ROUND W/BULLET-SHAPED TIP
	CHK	W/HOLES

CYDS*AENGINE DESIGN CONTROL ACTIVITY

THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY, INDUSTRIAL ORGANIZATION, OR OTHER ENTITY, WHICH CONTROLS THE DESIGN OF THE ENGINE.

Enter the alpha-numeric reply with five character(s) exactly.

(CYDSAV1N5F)

CYDT*AENGINE MODEL NUMBER FOR WHICH DESIGNED

THE COMBINED GROUPS OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ENGINE FOR WHICH THE ITEM IS DESIGNED.

Enter the alpha-numeric reply with a minimum of one character.

(CYDTAO7)

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ENAC*DENVIRONMENTAL ATTRIBUTE CODE

INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.

Enter the applicable reply code from the table below

(ENACDG4)

Table 1
	Reply Code (EN02)	Reply
	G4	COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS

Reply to this MRC in accordance with Volume 3.

AGAV*GEND ITEM IDENTIFICATION

THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.

Enter the reply in clear text.

(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)

CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY

THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.

Enter the reply in clear text.

(CXCYGLINE PROCESSOR CONTROL BOARD*)

ADAV*JOVERALL DIAMETER

A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADAVJLC2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

THDS*JTHREAD SIZE AND SERIES/TYPE DESIGNATOR

DESIGNATES THE THREAD DIAMETER,SERIES/TYPE,AND NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.

(THDSJLB2*)

Table 1
	Reply Code (AH06)	Reply
	AM	ACME
	AC	ACME C
	AG	ACME G
	MM	ACME-MODIFIED
	MS	ACME-SPECIAL
	AS	AMERICAN STANDARD
	MP	AMPT
	AN	ANPT
	AU	ANSFH
	PA	API
	PB	API IF
	RE	API REG
	PC	API STANDARD
	AP	APSC
	GA	ARMOURED CONDUIT, DIN 40430
	AW	ASA
	BM	ASA HOSE
	AV	ASH
	BA	BA
	RZ	BRASS
	CJ	BRITISH NONSTANDARD WHITFORM
	DP	BRITISH STANDARD BUTTRESS
	CY	BRITISH STANDARD CYCLE THREAD
	CQ	BS CON
	BF	BSF
	ZP	BSP. L
	DQ	BSP.C
	FB	BSP.F
	BE	BSP.F EXT
	BT	BSP.F INT
	PL	BSP.PL
	BL	BSP.PL EXT
	BN	BSP.PL INT
	BP	BSP.TR
	BS	BSP.TR EXT
	BR	BSP.TR INT
	TP	BSTP
	BW	BSW
	TT	BUTTRESS
	CS	CALIF STANDARD
	CH	CHEMICAL HOSE
	DW	COARSE
	CT	CUTTING
	DD	DARDALET
	DE	DEVILBISS
	DF	DEVILBISS STANDARD
	DM	DISSYMMETRICAL PROFILE NF L05-420
	DS	DOUBLE STUB
	DR	DRIVE
	CL	EF
	FN	FINE
	FM	FORMING
	FP	F-PTF
	DX	FRENCH CONDUIT THREAD NF C68-190
	GE	G
	CM	INTERNATIONAL METRIC FINE THREAD
	AD	INTERNATIONAL SPECIAL
	AR	INTERNATIONAL STANDARD
	AE	IPS
	CR	ISO FINE THREAD PITCH SERIES 1
	CW	ISO FINE THREAD PITCH SERIES 2
	CX	ISO FINE THREAD PITCH SERIES 3
	CZ	ISO FINE THREAD PITCH SERIES 4
	SY	ISO FORM
	SM	ISO M
	ME	ISO METRIC FINE
	SS	ISO S
	JL	JIC
	LH	LOWENHERZ
	EM	M
	CN	METRIC
	MN	METRIC NONSTD
	MX	METRIC TAPERED EXTERNAL
	MB	METRIC TAPERED EXTERNAL, DIN 158
	MJ	MJ
	MF	MODIFIED ACME 2G
	MA	MODIFIED AMERICAN NATIONAL STANDARD STRAIGHT PIPE
	CA	N
	NX	N 5
	AB	N ACME BOX
	AX	N SPECIAL
	BZ	N STD
	EN	N-12
	YN	N-16
	ZN	N-2
	NA	N-3 ACME
	NB	N-4 STANDARD
	DN	NATIONAL GAS ASSOCIATION
	BX	NC
	CE	NC-2
	NY	NC-2X
	NL	NCT
	NQ	NEF
	ET	NET
	BY	NF
	CB	NF-1
	CC	NF-2
	FS	NFS
	NG	NGO
	GS	NGS
	GT	NGT
	AF	NGTD
	AH	NGTI
	AJ	NGTP
	NH	NH
	NZ	NH-SPCL
	NK	NONSTANDARD ROUND
	BB	NONSTANDARD SPECIAL
	PN	NP
	PG	NPI
	SP	NPS
	SC	NPSC
	SF	NPSF
	SH	NPSH
	PS	NPSI
	SL	NPSL
	PM	NPSM
	AK	NPSN
	NP	NPT
	AL	NPTA
	NT	NPTF
	PR	NPT-MODIFIED
	TR	NPTR
	TS	NPTS
	AQ	NS
	SN	NS-2
	NW	NSPT
	PK	PACIFIC COAST
	LN	PL INT BS61
	PW	PT
	PH	PTF
	PT	PTF-SAE SHORT
	PP	PTF-SPL
	PE	PTF-SPL EXTRA SHORT
	PF	PTF-SPL SHORT
	RR	R
	RH	RAN HOSE
	RL	RL
	LB	RL(BSPL)
	RD	ROUND
	RJ	ROUND, DIN 20400
	RG	ROUND, DIN 405
	RM	ROUND, DIN 70156
	RK	ROUND, DIN 7272
	RP	RPT
	RS	RS
	SW	SAE
	LT	SAE-LT
	SG	SGT
	SJ	SI
	DA	SI FINE THREAD PITCH SERIES 1
	DB	SI FINE THREAD PITCH SERIES 2
	DC	SI FINE THREAD PITCH SERIES 3
	DJ	SI FINE THREAD PITCH SERIES 4
	DK	SI FINE THREAD PITCH SERIES 5
	SX	SI FORM
	SK	SI-M
	AY	SPECIAL
	AZ	SPECIAL ACME
	CF	SPECIAL MODIFIED WHITWORTH
	PQ	SPT
	SQ	SQUARE
	SD	STANDARD ACME DOUBLE LEAD
	ST	STD STUB ACME
	CP	STEWART WARNER SPECIAL
	SR	STI
	SA	STUB ACME
	SZ	STUB ACME DOUBLE LEAD
	SE	STUB ACME M1
	SB	STUB ACME M2
	MT	SUBMARINE THD
	TD	TAPER DRIVE
	EX	TR EXT BS61
	RN	TR INT BS61
	TZ	TRAPEZIUM
	AT	TWPP
	UN	UN
	NR	UN FORM
	FF	UN-12
	FG	UN-16
	ZA	UN-20
	ZB	UN-28
	ZC	UN-32
	FC	UN-4
	FD	UN-6
	FE	UN-8
	NC	UNC
	DL	UNC DOUBLE LEAD
	DG	UND
	BK	UNDERWRITERS
	CG	UNDERWRITERS STANDARD TIP
	NE	UNEF
	DH	UNEF-2A
	YM	UNEF-MODIFIED
	NF	UNF
	MD	UNF-MODIFIED
	BD	UNG
	BQ	UNIFIED
	NJ	UNJ
	JC	UNJC
	JE	UNJEF
	JF	UNJF
	JS	UNJS
	NM	UNM
	ND	UN-MODIFIED
	HR	UNR
	RC	UNRC
	RF	UNRF
	RT	UNRS
	NS	UNS
	BJ	USF
	WW	WHITWORTH
	WF	WHITWORTH PIPE, DIN 259
	WG	WHITWORTH PIPE, DIN 2999
	WP	WHITWORTH PIPE, DIN 3858
	WT	WHITWORTH SELECTED THREAD
	WH	WHITWORTH STRAIGHT EXTERNAL PIPE, DIN 259
	WS	WHITWORTH STRAIGHT INTERNAL PIPE, DIN 259
	WN	WHITWORTH STRAIGHT INTERNAL PIPE, DIN 2999
	WB	WHITWORTH STRAIGHT INTERNAL PIPE, DIN 3858
	WE	WHITWORTH TAPERED EXTERNAL PIPE, DIN 2999
	WA	WHITWORTH TAPERED EXTERNAL PIPE, DIN 3858
	WD	WOOD

ABKW*JOVERALL HEIGHT

THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABKWJLC2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ARJA*JPRESSURE RATING

THE PRESSURE AT WHICH AN ITEM IS RATED TO OPERATE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ARJAJL2.0*)

Table 1
	Reply Code (AB18)	Reply
	L	KILOPASCALS

ABMK*JOVERALL WIDTH

AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABMKJAB2.0*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AJKB*ACOMPONENT DOCUMENT PAGE NUMBER

THE PAGE NUMBER INDICATING THE LOCATION OF THE COMPONENT/S/ LISTED IN THE DOCUMENT.

Enter the alpha-numeric reply with a minimum of one character.

(AJKBAA1)

AJJY*ADOCUMENT SOURCE

THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS THE DOCUMENT.

Enter the alpha-numeric reply with five character(s) exactly.

(AJJYAT2N4N)

AJJZ*DDOCUMENT TYPE

INDICATES THE TYPE OF DOCUMENT BY THE TITLE.

Enter the applicable reply code from the table below

(AJJZDDB)

Table 1
	Reply Code (AF70)	Reply
	CB	AIR FORCE SPECIFICATION
	CE	ARMED SERVICES CATALOG
	DM	ARMY MODIFICATION WORK ORDER
	EB	ARMY SERVICE CATALOG
	BC	ARMY SUPPLY CATALOG
	AZ	ARMY SUPPLY MANUAL
	EF	ARMY TECHNICAL MANUAL
	BD	BILL OF MATERIAL
	EP	BUMED AUTHORIZED ALLOWANCES
	EQ	BUMED FLEET MARINE FORCE AUTHORIZED ALLOWANCES
	BE	CATALOG SHEET
	AW	CERTIFIED
	CC	CHARACTERISTICS RECORD
	AY	CHEMICAL WARFARE SUPPLY CATALOG
	FD	CIVIL STANDARD
	CD	COMMERCIAL CATALOG
	DJ	COMMERCIAL LEAFLET
	ED	COMMERCIAL MANUAL
	EE	COMMUNICATION EQUIPMENT PARTS CATALOG
	ET	COMPLETE EQUIPMENT SCHEDULE
	CG	CRYSTAL FREQUENCY LIST
	CH	DESIGN CONTROL DRAWING
	DX	DRAWING
	DK	ELECTRONICS CATALOG
	AN	ENGINEERING DRAWING
	BF	ENGINEERING ORDER
	BG	ENGINEERING PARTS LIST
	DQ	ENGINEERING RECORDS
	FC	EQUIPMENT CHECK LIST
	DR	EQUIPMENT OVERHAUL AND ISSUE INSTRUCTIONS
	AK	EQUIPMENT SETS
	AE	FEDERAL SPECIFICATION
	CF	FEDERAL SUPPLY CATALOG
	CL	FIELD BULLETIN
	CJ	FIELD CHANGE BULLETIN
	AA	FOREST SERVICE SPECIFICATION
	BH	FORM SHEET
	EY	GERMAN DEFENCE EQUIPMENT STANDARD
	EZ	GERMAN INDUSTRY STANDARD
	BJ	INDUSTRIAL CATALOG
	BK	INDUSTRIAL DRAWING
	AP	INDUSTRIAL SPECIFICATION
	CK	INITIAL OUTFITTING LIST
	EJ	INSTRUCTION BOOK
	DL	INSTRUCTION BOOK 107
	AT	INSTRUCTION MANUAL
	CM	INTERNAL DISASSEMBLY INSTRUCTIONS
	FA	INTERNATIONAL ORGANIZATION FOR STANDARDIZATION
	CP	LETTER
	AQ	MAINTENANCE HANDBOOK
	EG	MAINTENANCE INSTRUCTIONS HANDBOOK
	EK	MAINTENANCE MANUAL
	BL	MAINTENANCE PARTS LIST
	EW	MANUFACTURER BILL OF MATERIAL
	DN	MARINE CORPS STOCK LIST
	DH	MARINE CORPS STOCK LIST, ENGINEER
	EX	MATABW EQUIPMENT COMPONENT LIST
	CR	MATERIAL LIST
	BM	MEDICAL CATALOG
	CS	MFR BULLETIN
	CT	MFR CATALOG
	CV	MFR DRAWING
	CX	MFR LETTER
	BN	MILITARY DRAWING
	AC	MILITARY SPECIFICATION
	AF	MILITARY STANDARD
	BQ	MODIFICATION INSTRUCTION
	BR	MODIFICATION KIT PUBLICATION
	BP	MODIFICATION WORK ORDER
	FB	NATIONAL TECHNICAL TERMS OF DELIVERY
	EC	NAVY CATALOG OF MATERIAL
	ER	NAVY CATALOGUE OF ADVANCED BASE FUNCTIONAL COMPONENTS
	AR	NOMENCLATURE CARD
	EH	OPERATING INSTRUCTIONS HANDBOOK
	DZ	ORDNANCE PAMPHLET
	CU	PACKAGE LIST
	CN	PACKING INSTRUCTIONS
	AL	PACKING LIST
	BS	PARTS CATALOG
	EL	PARTS CONTROL LIST
	BT	PARTS LIST
	DW	PRELIMINARY INSTRUCTION BOOK
	CW	PROCUREMENT PACKAGE LIST
	CY	PROCUREMENT PARTS LIST
	CZ	PROCUREMENT SPECIFICATION
	DA	PRODUCT IDENTIFICATION CHART
	DB	PROJECT ORDER
	BW	PURCHASE DESCRIPTION
	EA	REPAIR MANUAL
	AS	REPAIR PARTS LIST
	BX	SERVICE BULLETIN
	DY	SERVICE INSTRUCTION
	EM	SERVICE INSTRUCTIONS, HANDBOOK
	EN	SERVICE MANUAL
	BA	SETS OF ENGINEER EQUIPMENT
	BY	SIGNAL CORPS SPECIFICATION
	DP	SPECIAL TOOL LIST
	DC	SPECIFICATION
	DD	STANDARD NOMENCLATURE LIST
	AM	STOCK LIST
	BZ	SUPPLY BULLETIN
	AH	SUPPLY CATALOG
	BB	SUPPLY CATALOG COMPONENT LIST
	DG	SUPPLY INSTRUCTIONS
	AJ	SUPPLY MANUAL
	DE	SUPPORT EQUIPMENT REQUIREMENT SHEET
	DF	TABLE OF ALLOWANCES
	AX	TECHNICAL
	CA	TECHNICAL BULLETIN
	AB	TECHNICAL MANUAL
	DS	TECHNICAL MANUAL, OVERHAUL INSTRUCTIONS
	AG	TECHNICAL ORDER
	DT	TECHNICAL PUBLICATION
	AD	TRAINING MANUAL
	ES	UNIT ASSEMBLAGE
	CQ	WORK ORDER

AJKA*ADOCUMENT IDENTIFICATION

THE NUMBER OR SYMBOL USED TO IDENTIFY THE DOCUMENT.

Enter the alpha-numeric reply with a minimum of one character.

(AJKAAD5)

CLQL*GCOLLOQUIAL NAME

A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.

Enter the reply in clear text.

(CLQLGWOVEN WIRE CLOTH*)