A switch which is actuated by a float or sensing device(s) to control liquid level and/or actuate visual or audible warning systems. It may include a relay controlled by the switch element. Excludes:TRANSMITTER,LIQUID QUANTITY.
ISAC Reply 3AEE added to MRC ACYN.
ISAC Reply 3AGW added to MRC ACYN.
ISAC Reply 3AGX added to MRC ACYN.
ISAC Reply 3AGY added to MRC ACYN.
ISAC Reply 3AHC added to MRC ACYN.
ISAC Reply 3AHD added to MRC ACYN.
ISAC Reply 3AHE added to MRC ACYN.
ISAC Reply 3HOU added to MRC ACYN.
ISAC Reply 1A deleted from MRC ACYN.
ISAC Reply 1B deleted from MRC ACYN.
ISAC Reply 1C deleted from MRC ACYN.
ISAC Reply 1D deleted from MRC ACYN.
ISAC Reply 1E deleted from MRC ACYN.
ISAC Reply 1F deleted from MRC ACYN.
ISAC Reply 1G deleted from MRC ACYN.
ISAC Reply 1H deleted from MRC ACYN.
ISAC Reply 1J deleted from MRC ACYN.
ISAC Reply 1K deleted from MRC ACYN.
ISAC Reply 1L deleted from MRC ACYN.
ISAC Reply 1M deleted from MRC ACYN.
ISAC Reply 1N deleted from MRC ACYN.
ISAC Reply 1P deleted from MRC ACYN.
ISAC Reply 1Q deleted from MRC ACYN.
ISAC Reply 1R deleted from MRC ACYN.
ISAC Reply 1S deleted from MRC ACYN.
ISAC Reply 1T deleted from MRC ACYN.
ISAC Reply 1U deleted from MRC ACYN.
ISAC Reply 1V deleted from MRC ACYN.
ISAC Reply 1W deleted from MRC ACYN.
ISAC Reply 1X deleted from MRC ACYN.
ISAC Reply 3AEE added to MRC ACZB.
ISAC Reply 3AGW added to MRC ACZB.
ISAC Reply 3AGX added to MRC ACZB.
ISAC Reply 3AGY added to MRC ACZB.
ISAC Reply 3AHC added to MRC ACZB.
ISAC Reply 3AHD added to MRC ACZB.
ISAC Reply 3AHE added to MRC ACZB.
ISAC Reply 3AHJ added to MRC ACZB.
ISAC Reply 3HOU added to MRC ACZB.
ISAC Reply 1A deleted from MRC ACZB.
ISAC Reply 1B deleted from MRC ACZB.
ISAC Reply 1C deleted from MRC ACZB.
ISAC Reply 1D deleted from MRC ACZB.
ISAC Reply 1E deleted from MRC ACZB.
ISAC Reply 1F deleted from MRC ACZB.
ISAC Reply 1G deleted from MRC ACZB.
ISAC Reply 1H deleted from MRC ACZB.
ISAC Reply 1J deleted from MRC ACZB.
ISAC Reply 1K deleted from MRC ACZB.
ISAC Reply 1L deleted from MRC ACZB.
ISAC Reply 1M deleted from MRC ACZB.
ISAC Reply 1N deleted from MRC ACZB.
ISAC Reply 1P deleted from MRC ACZB.
ISAC Reply 1Q deleted from MRC ACZB.
ISAC Reply 1R deleted from MRC ACZB.
ISAC Reply 1S deleted from MRC ACZB.
ISAC Reply 1T deleted from MRC ACZB.
ISAC Reply 1U deleted from MRC ACZB.
ISAC Reply 1V deleted from MRC ACZB.
ISAC Reply 1W deleted from MRC ACZB.
ISAC Reply 1X deleted from MRC ACZB.
ISAC Reply 3AEE added to MRC FAAZ.
ISAC Reply 3AGW added to MRC FAAZ.
ISAC Reply 3AGX added to MRC FAAZ.
ISAC Reply 3AGY added to MRC FAAZ.
ISAC Reply 3AHC added to MRC FAAZ.
ISAC Reply 3AHD added to MRC FAAZ.
ISAC Reply 3AHE added to MRC FAAZ.
ISAC Reply 3HOU added to MRC FAAZ.
ISAC Reply 1A deleted from MRC FAAZ.
ISAC Reply 1B deleted from MRC FAAZ.
ISAC Reply 1C deleted from MRC FAAZ.
ISAC Reply 1D deleted from MRC FAAZ.
ISAC Reply 1E deleted from MRC FAAZ.
ISAC Reply 1F deleted from MRC FAAZ.
ISAC Reply 1G deleted from MRC FAAZ.
ISAC Reply 1H deleted from MRC FAAZ.
ISAC Reply 1J deleted from MRC FAAZ.
ISAC Reply 1K deleted from MRC FAAZ.
ISAC Reply 1L deleted from MRC FAAZ.
ISAC Reply 1M deleted from MRC FAAZ.
ISAC Reply 1N deleted from MRC FAAZ.
ISAC Reply 1P deleted from MRC FAAZ.
ISAC Reply 1Q deleted from MRC FAAZ.
ISAC Reply 1R deleted from MRC FAAZ.
ISAC Reply 1S deleted from MRC FAAZ.
ISAC Reply 1T deleted from MRC FAAZ.
ISAC Reply 1U deleted from MRC FAAZ.
ISAC Reply 1V deleted from MRC FAAZ.
ISAC Reply 1W deleted from MRC FAAZ.
ISAC Reply 1X deleted from MRC FAAZ.
ISAC Reply 3AEE added to MRC ACYR.
ISAC Reply 3AGW added to MRC ACYR.
ISAC Reply 3AGX added to MRC ACYR.
ISAC Reply 3AGY added to MRC ACYR.
ISAC Reply 3AHB added to MRC ACYR.
ISAC Reply 3AHC added to MRC ACYR.
ISAC Reply 3AHD added to MRC ACYR.
ISAC Reply 3AHE added to MRC ACYR.
ISAC Reply 3AHF added to MRC ACYR.
ISAC Reply 3AHJ added to MRC ACYR.
ISAC Reply 3HOU added to MRC ACYR.
ISAC Reply 1A deleted from MRC ACYR.
ISAC Reply 1B deleted from MRC ACYR.
ISAC Reply 1C deleted from MRC ACYR.
ISAC Reply 1D deleted from MRC ACYR.
ISAC Reply 1E deleted from MRC ACYR.
ISAC Reply 1F deleted from MRC ACYR.
ISAC Reply 1G deleted from MRC ACYR.
ISAC Reply 1H deleted from MRC ACYR.
ISAC Reply 1J deleted from MRC ACYR.
ISAC Reply 1K deleted from MRC ACYR.
ISAC Reply 1L deleted from MRC ACYR.
ISAC Reply 1M deleted from MRC ACYR.
ISAC Reply 1N deleted from MRC ACYR.
ISAC Reply 1P deleted from MRC ACYR.
ISAC Reply 1Q deleted from MRC ACYR.
ISAC Reply 1R deleted from MRC ACYR.
ISAC Reply 1S deleted from MRC ACYR.
ISAC Reply 1T deleted from MRC ACYR.
ISAC Reply 1U deleted from MRC ACYR.
ISAC Reply 1V deleted from MRC ACYR.
ISAC Reply 1W deleted from MRC ACYR.
ISAC Reply 1X deleted from MRC ACYR.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED37187*)
ACYN*JAC VOLTAGE RATING
THE VALUE,OR RANGE OF VALUES,OF ROOT MEAN SQUARE POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYN3AGWJMC2.0*;ACYN3AGWJMC2.0$JMC2.0*;ACYN3AGWJMC2.0$$JMC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AGW | FIRST ALTERNATE OPERATING POWER RQMT |
| 3AGX | SECOND ALTERNATE OPERATING POWER RQMT |
| 3AGY | THIRD ALTERNATE OPERATING POWER RQMT |
| 3AHC | FIRST OPERATING POWER RQMT |
| 3AHD | SECOND OPERATING POWER RQMT |
| 3AHE | THIRD OPERATING POWER RQMT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| M | MEGAVOLTS |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACZB*JFREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACZB3AGWJKC2.0*;ACZB3AGWJKC2.0$JKC2.0*;ACZB3AGWJKC2.0$$JKC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AGW | FIRST ALTERNATE OPERATING POWER RQMT |
| 3AGX | SECOND ALTERNATE OPERATING POWER RQMT |
| 3AGY | THIRD ALTERNATE OPERATING POWER RQMT |
| 3AHC | FIRST OPERATING POWER RQMT |
| 3AHD | SECOND OPERATING POWER RQMT |
| 3AHE | THIRD OPERATING POWER RQMT |
| 3AHJ | ELEVENTH OPERATING POWER RQMT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC32) | Reply |
| G | GIGAHERTZ |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(FAAZ3AHCDE*;FAAZ3AHCDE$DC*;FAAZ3AHCDE$$DC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AGW | FIRST ALTERNATE OPERATING POWER RQMT |
| 3AGX | SECOND ALTERNATE OPERATING POWER RQMT |
| 3AGY | THIRD ALTERNATE OPERATING POWER RQMT |
| 3AHC | FIRST OPERATING POWER RQMT |
| 3AHD | SECOND OPERATING POWER RQMT |
| 3AHE | THIRD OPERATING POWER RQMT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD02) | Reply |
| A | SINGLE |
| E | SINGLE/THREE |
| C | THREE |
| B | TWO |
ACYR*JDC VOLTAGE RATING
THE VALUE,OR RANGE OF VALUES,OF DIRECT CURRENT POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACYR3AGWJKB2.0*;ACYR3AGWJKB2.0$JKB2.0*;ACYR3AGWJKB2.0$$JKB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AGW | FIRST ALTERNATE OPERATING POWER RQMT |
| 3AGX | SECOND ALTERNATE OPERATING POWER RQMT |
| 3AGY | THIRD ALTERNATE OPERATING POWER RQMT |
| 3AHB | TENTH ALTERNATE OPERATING POWER RQMT |
| 3AHC | FIRST OPERATING POWER RQMT |
| 3AHD | SECOND OPERATING POWER RQMT |
| 3AHE | THIRD OPERATING POWER RQMT |
| 3AHF | FOURTH OPERATING POWER RQMT |
| 3AHJ | ELEVENTH OPERATING POWER RQMT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| M | MEGAVOLTS |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALSF*DINTERNAL BATTERY ACCOMMODATION
AN INDICATION OF WHETHER OR NOT A FACILITY/IES/ TO ACCOMMODATE A BATTERY/IES/ IS INCLUDED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ALSF1QDC)
| Table 1 |
| ISAC Field Indicator (0360) | Location |
| 1A | 1ST ALTERNATE OPERATING POWER RQMT |
| 1B | 2ND ALTERNATE OPERATING POWER RQMT |
| 1C | 3RD ALTERNATE OPERATING POWER RQMT |
| 1D | 4TH ALTERNATE OPERATING POWER RQMT |
| 1E | 5TH ALTERNATE OPERATING POWER RQMT |
| 1F | 6TH ALTERNATE OPERATING POWER RQMT |
| 1G | 7TH ALTERNATE OPERATING POWER RQMT |
| 1H | 8TH ALTERNATE OPERATING POWER RQMT |
| 1J | 9TH ALTERNATE OPERATING POWER RQMT |
| 1K | 10TH ALTERNATE OPERATING POWER RQMT |
| 1L | 11TH ALTERNATE OPERATING POWER RQMT |
| 1M | 1ST OPERATING POWER RQMT |
| 1N | 2ND OPERATING POWER RQMT |
| 1P | 3RD OPERATING POWER RQMT |
| 1Q | 4TH OPERATING POWER RQMT |
| 1R | 5TH OPERATING POWER RQMT |
| 1S | 6TH OPERATING POWER RQMT |
| 1T | 7TH OPERATING POWER RQMT |
| 1U | 8TH OPERATING POWER RQMT |
| 1V | 9TH OPERATING POWER RQMT |
| 1W | 10TH OPERATING POWER RQMT |
| 1X | 11TH OPERATING POWER RQMT |
| Table 2 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
APGW*JCURRENT RATING AT MAXIMUM RATED VOLTAGE
THE AMOUNT OF CURRENT AT MAXIMUM RATED VOLTAGE FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(APGWJAAF2.0*;APGWJAAF2.0$$JAAF2.1*)
| Table 1 |
| Reply Code (AC30) | Reply |
| A | AMPERES |
| L | MILLIAMPERES |
| Table 2 |
| Reply Code (AK53) | Reply |
| AF | NOMINAL LOAD |
| AG | RESISTIVE LOAD |
BJKC*JMAXIMUM CURRENT RATING
THE MAXIMUM CONTINUOUS CURRENT WHICH MUST NOT BE EXCEEDED IN ORDER TO AVOID DAMAGE TO THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BJKCJAAG2.0*)
| Table 1 |
| Reply Code (AC30) | Reply |
| A | AMPERES |
| L | MILLIAMPERES |
| Table 2 |
| Reply Code (AK53) | Reply |
| AF | NOMINAL LOAD |
| AG | RESISTIVE LOAD |
APGY*JVOLTAGE RATING AT MAXIMUM RATED CURRENT
THE AMOUNT OF VOLTAGE FOR WHICH THE ITEM IS DESIGNED TO WITHSTAND AT THE MAXIMUM RATED CURRENT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(APGYJV2.0*)
| Table 1 |
| Reply Code (AB63) | Reply |
| L | MILLIVOLTS |
| V | VOLTS |
BJKD*GCONTACT ARRANGEMENT
THE DESIGNATION THAT IDENTIFIES THE SCHEMATIC DIAGRAM OF THE CONTACT ARRANGEMENT.
Enter clear text.
(BJKDGCLEARTEXT)
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
CWTL*DFLOAT AND CONTACT POSITIONS
THE RELATIONSHIP BETWEEN THE POSITION OF THE FLOAT AND THE POSITION OF THE CONTACTS.
Enter the applicable reply code from the table below
(CWTLDFG*;CWTLDFK$DFH*;CWTLDFK$$DFH*)
| Table 1 |
| Reply Code (AF63) | Reply |
| FJ | FLOAT DOWN, CONTACTS CLOSED |
| FK | FLOAT DOWN, CONTACTS OPEN |
| FG | FLOAT UP, CONTACTS CLOSED |
| FH | FLOAT UP, CONTACTS OPEN |
IF STYLE/REPLY CODE(s) EC WERE ENTERED FOR MRC AGBD, YOU MUST ANSWER MRC (ABJP)
IF STYLE/REPLY CODE(s) AB OR EB WERE ENTERED FOR MRC AGBD, YOU MUST ANSWER MRC (AEEE and AGBG)
AGBDDELECTRICAL CONNECTION TYPE
INDICATES THE TYPE OF ELECTRICAL CONNECTION INCLUDED ON THE ITEM.
Enter the applicable reply code from the table below
(AGBDDFS*;AGBDDDK$DEC*;AGBDDDK$$DEC*)
| Table 1 |
| Reply Code (AE79) | Reply |
| EC | CABLE |
| FS | CONNECTOR BOX |
| EB | CONNECTOR PLUG |
| AB | CONNECTOR RECEPTACLE |
| KT | SCREW TERMINAL |
| AF | TERMINAL BLOCK |
| EM | TERMINAL BOX |
| DK | TERMINAL LUG |
| AH | WIRE LEAD |
AEEE*ACONNECTOR MANUFACTURER CODE
THE IDENTIFYING NUMERIC CODE OF THE ORIGINATOR THAT CONTROLS OR MANUFACTURES THE ELECTRICAL CONNECTOR RECEPTACLE.
Enter the alpha-numeric reply with five character(s) exactly.
(AEEEAA3K4P)
AGBG*ACONNECTOR IDENTIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURER'S NUMBER OR SYMBOL USED TO IDENTIFY THE CONNECTOR.
Enter the alpha-numeric reply with a minimum of one character.
(AGBGAY0)
ABJP*JPOWER CABLE LENGTH
THE LENGTH MEASURED FROM THE ELEMENT TO THE EXTREME END OF THE POWER CABLE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABJPJAC2.0*;ABJPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BJKGDRELAY
AN INDICATION OF WHETHER OR NOT A RELAY IS INCLUDED.
Enter the applicable reply code from the table below
(BJKGDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
IF STYLE/REPLY CODE(s) APV WERE ENTERED FOR MRC BJKH, YOU MUST ANSWER MRC (BJKJ)
BJKHDLIQUID TYPE FOR WHICH DESIGNED
INDICATES THE TYPE OF LIQUID(S) FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BJKHDABM*;BJKHDALY$DAFW*;BJKHDALY$$DAFW*)
| Table 1 |
| Reply Code (AB75) | Reply |
| ALT | AMMONIA |
| APX | CALIBRATING FLUID |
| AMC | DEMINERALIZED WATER |
| ADY | DIELECTRIC COOLANT FLUID |
| ALA | DIESEL FUEL |
| ACU | DIESEL OIL |
| APZ | ETHANOL GASOLINE, E15 |
| APY | ETHANOL GASOLINE, E85 |
| ABM | ETHYLENE GLYCOL |
| APV | GAS, AVIATION |
| ADA | GASOLINE |
| AQB | GASOLINE, 87 OCTANE |
| AQC | GASOLINE, 89 OCTANE |
| AQA | GASOLINE, 92 OCTANE |
| AQE | GASOLINE, 93 OCTANE |
| AQD | GASOLINE, 95 OCTANE |
| AEL | HYDRAULIC FLUID |
| ADH | HYDRAULIC OIL |
| ACM | KEROSENE |
| AQM | LEAD REPLACMENT PETROL (LRP) |
| APU | LEADED GASOLINE |
| ALN | LIQUID NITROGEN |
| ADJ | LIQUID OXYGEN |
| AQJ | LUBRICANT, DRY |
| AEB | LUBRICANT, OIL |
| AQH | LUBRICANT, PENETRATING |
| AQG | LUBRICAT, GREASE |
| AFW | METHYL ALCOHOL |
| ALY | MINERAL OIL |
| AME | MULTI FUEL |
| ALS | NONPOTABLE WATER |
| APW | PROPYLENE GLYCOL |
| AMW | SEA WATER |
| AMV | SEWAGE |
| TEL | TETRA ETHYL LEAD |
| AKZ | UNLEADED GASOLINE |
| ACN | WATER |
| AQK | WATER-ALCOHOL MIXTURE |
IF STYLE/REPLY CODE(s) AAC WERE ENTERED FOR MRC BJKJ, YOU MUST ANSWER MRC (BJKK and BJKL and BJKM)
BJKJ*DAIRCRAFT FUEL FOR WHICH DESIGNED
THE AIRCRAFT FUEL FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BJKJDAAB)
| Table 1 |
| Reply Code (AN21) | Reply |
| AAB | ALL |
| AAC | SPECIFIC |
BJKK*GAIRCRAFT FUEL GRADE SPECIFICATION
THE ALPHA/NUMERIC OR SYMBOL USED TO IDENTIFY THE SPECIFICATION PERTAINING TO THE AIRCRAFT FUEL.
Enter clear text.
(BJKKGCLEARTEXT)
BJKL*GAIRCRAFT FUEL GRADE
THE ALPHA/NUMERIC OR SYMBOL USED TO DENOTE THE AIRCRAFT FUEL GRADE.
Enter clear text.
(BJKLGCLEARTEXT)
BJKM*GAIRCRAFT FUEL GRADE SPECIFIC GRAVITY RATING
AN INDICATION OF THE SPECIFIC GRAVITY RATING OF THE GRADE OF AIRCRAFT FUEL.
Enter clear text.
(BJKMGCLEARTEXT)
AWTNJOPERATING TEMP RATING
THE TEMPERATURE AT WHICH THE ITEM OPERATES.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWTNJFC2.0*;AWTNJFC2.0$$JFC2.1*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFLWDACTUATION METHOD
THE MEANS BY WHICH THE ITEM IS ACTUATED.
Enter the applicable reply code from the table below
(AFLWDAEU)
| Table 1 |
| Reply Code (AC58) | Reply |
| ACY | BUOYANCY |
| ACW | ELECTRICAL CONDUCTANCE |
| AEU | ELECTROMAGNETIC |
| ACX | ELECTRONIC |
AWAE*AFLOAT QUANTITY
THE NUMBER OF FLOATS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(AWAEA10*)
BJKN*JFLOAT EFFECTIVE TRAVEL
THE DISTANCE OF THE EFFECTIVE TRAVEL OF THE FLOAT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BJKNJAA2.0*;BJKNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BBJXDMOUNTING POSITION
THE INSTALLED POSITION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BBJXDAAF*;BBJXDABP$$DAAP*)
| Table 1 |
| Reply Code (AM84) | Reply |
| ABP | AT ANGLE TO MOUNTING CENTER |
| AAP | HORIZONTAL |
| AAF | VERTICAL |
AXGY*DMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDABH*;AXGYDAGQ$DABB*;AXGYDAGQ$$DABB*)
| Table 1 |
| Reply Code (AM39) | Reply |
| ABB | BASE |
| ABC | BRACKET(S) |
| ABH | CLAMP |
| ACR | FLANGE |
| AGQ | FLUSH |
| ACS | THREAD |
BJKP*GMOUNTING DIMENSIONS
THE MOUNTING DIMENSIONS OF THE ITEM.
Enter clear text.
(BJKPGCLEARTEXT)
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAB2.0*;ADAVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BJKQ*JTANK INSERTION LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION FROM THE MOUNTING SURFACE TO THE END OF THE ITEM,WHICH IS DESIGNED TO BE INSERTED INTO THE TANK.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BJKQJAC2.0*;BJKQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFNY)
| Table 1 |
| Reply Code (AN47) | Reply |
| FNY | ROHS DIRECTIVE COMPLIANCE |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDG4)
| Table 1 |
| Reply Code (EN02) | Reply |
| G4 | COMPREHENSIVE PROCUREMENT GUIDELINE - VEHICULAR PRODUCTS - REBUILT VEHICULAR PARTS |
AFJE*GSPECIFIC EQUIPMENT ACCOMMODATED
THE NAME OF THE EQUIPMENT THE ITEM IS SPECIFICALLY DESIGNED TO ACCOMMODATE.
Enter clear text.
(AFJEGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ052*;HZRDDHAZ012$$DHAZ222*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ012 | COPPER |
| HAZ222 | IRON |
| HAZ029 | LEAD |
| HAZ052 | ZINC |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
Reply to this requirement only if the MRC for liquid has been answered and there is additional standard specifications that need to be identified on the Liquid reply.
LDCL*JLIQUID DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE, WHICH IDENTIFIES THE LIQUID.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(LDCLJEATEXT1234*;LDCLJEATEXT1234$$JEATEXT1234*;LDCLJEATEXT1234$JEATEXT1234*;LDCL1BJEATEXT1234*;LDCL1BJEATEXT1234$$JEATEXT1234*;LDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP94) | Reply |
| M | 10TH RESPONSE |
| N | 11TH RESPONSE |
| P | 12TH RESPONSE |
| Q | 13TH RESPONSE |
| R | 14TH RESPONSE |
| S | 15TH RESPONSE |
| T | 16TH RESPONSE |
| U | 17TH RESPONSE |
| W | 18TH RESPONSE |
| X | 19TH RESPONSE |
| B | 1ST RESPONSE |
| Y | 20TH RESPONSE |
| Z | 21ST RESPONSE |
| V | 22ND RESPONSE |
| C | 2ND RESPONSE |
| D | 3RD RESPONSE |
| E | 4TH RESPONSE |
| F | 5TH RESPONSE |
| H | 6TH RESPONSE |
| J | 7TH RESPONSE |
| K | 8TH RESPONSE |
| L | 9TH RESPONSE |
| G | ALL RESPONSE |
| A | SINGLE RESPONSE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)