A protective covering specially designed to be mounted on an aircraft, ground vehicle, marine surface/subsurface craft, and/or fire control equipment. It protects from small arms or anti-aircraft fire or exploding-mine fragments. It may be made from metallic or nonmetallic material, either in sections or in one piece. It may have integral fittings for installation. Excludes: ARetallic material, either in sections or in one piece. It may have integral fMOR PLATE; BODY ARMOR,FRAGMENTATION PROTECTIVE AND CLOTH,BALLISTIC.
ISAC Reply 3AEE added to MRC ABTB.
ISAC Reply 3BDK added to MRC ABTB.
ISAC Reply 3BDL added to MRC ABTB.
ISAC Reply 3BDM added to MRC ABTB.
ISAC Reply 3BEH added to MRC ABTB.
ISAC Reply 3BEK added to MRC ABTB.
ISAC Reply 3EFI added to MRC ABTB.
ISAC Reply 3EFJ added to MRC ABTB.
ISAC Reply 3EFK added to MRC ABTB.
ISAC Reply 3EFL added to MRC ABTB.
ISAC Reply 3EFM added to MRC ABTB.
ISAC Reply 3EFN added to MRC ABTB.
ISAC Reply 3EFO added to MRC ABTB.
ISAC Reply 3EFP added to MRC ABTB.
ISAC Reply 3EFQ added to MRC ABTB.
ISAC Reply 3EFR added to MRC ABTB.
ISAC Reply 3EFY added to MRC ABTB.
ISAC Reply 3EFZ added to MRC ABTB.
ISAC Reply 3HOU added to MRC ABTB.
ISAC Reply 3IGJ added to MRC ABTB.
ISAC Reply 1A deleted from MRC ABTB.
ISAC Reply 2AA deleted from MRC ABTB.
ISAC Reply 2AB deleted from MRC ABTB.
ISAC Reply 2AC deleted from MRC ABTB.
ISAC Reply 1B deleted from MRC ABTB.
ISAC Reply 1C deleted from MRC ABTB.
ISAC Reply 1D deleted from MRC ABTB.
ISAC Reply 1E deleted from MRC ABTB.
ISAC Reply 1F deleted from MRC ABTB.
ISAC Reply 1G deleted from MRC ABTB.
ISAC Reply 1H deleted from MRC ABTB.
ISAC Reply 1J deleted from MRC ABTB.
ISAC Reply 1K deleted from MRC ABTB.
ISAC Reply 1L deleted from MRC ABTB.
ISAC Reply 1M deleted from MRC ABTB.
ISAC Reply 1N deleted from MRC ABTB.
ISAC Reply 1P deleted from MRC ABTB.
ISAC Reply 1Q deleted from MRC ABTB.
ISAC Reply 1R deleted from MRC ABTB.
ISAC Reply 1S deleted from MRC ABTB.
ISAC Reply 1T deleted from MRC ABTB.
ISAC Reply 1U deleted from MRC ABTB.
ISAC Reply 1V deleted from MRC ABTB.
ISAC Reply 1W deleted from MRC ABTB.
ISAC Reply 1X deleted from MRC ABTB.
ISAC Reply 1Y deleted from MRC ABTB.
ISAC Reply 1Z deleted from MRC ABTB.
ISAC Reply 3AEE added to MRC ACHY.
ISAC Reply 3BDK added to MRC ACHY.
ISAC Reply 3BDL added to MRC ACHY.
ISAC Reply 3BDM added to MRC ACHY.
ISAC Reply 3BEH added to MRC ACHY.
ISAC Reply 3BEK added to MRC ACHY.
ISAC Reply 3EFI added to MRC ACHY.
ISAC Reply 3EFJ added to MRC ACHY.
ISAC Reply 3EFK added to MRC ACHY.
ISAC Reply 3EFL added to MRC ACHY.
ISAC Reply 3EFN added to MRC ACHY.
ISAC Reply 3EFT added to MRC ACHY.
ISAC Reply 3EFW added to MRC ACHY.
ISAC Reply 3HOU added to MRC ACHY.
ISAC Reply 1A deleted from MRC ACHY.
ISAC Reply 2AA deleted from MRC ACHY.
ISAC Reply 2AB deleted from MRC ACHY.
ISAC Reply 2AC deleted from MRC ACHY.
ISAC Reply 1B deleted from MRC ACHY.
ISAC Reply 1C deleted from MRC ACHY.
ISAC Reply 1D deleted from MRC ACHY.
ISAC Reply 1E deleted from MRC ACHY.
ISAC Reply 1F deleted from MRC ACHY.
ISAC Reply 1G deleted from MRC ACHY.
ISAC Reply 1H deleted from MRC ACHY.
ISAC Reply 1J deleted from MRC ACHY.
ISAC Reply 1K deleted from MRC ACHY.
ISAC Reply 1L deleted from MRC ACHY.
ISAC Reply 1M deleted from MRC ACHY.
ISAC Reply 1N deleted from MRC ACHY.
ISAC Reply 1P deleted from MRC ACHY.
ISAC Reply 1Q deleted from MRC ACHY.
ISAC Reply 1R deleted from MRC ACHY.
ISAC Reply 1S deleted from MRC ACHY.
ISAC Reply 1T deleted from MRC ACHY.
ISAC Reply 1U deleted from MRC ACHY.
ISAC Reply 1V deleted from MRC ACHY.
ISAC Reply 1W deleted from MRC ACHY.
ISAC Reply 1X deleted from MRC ACHY.
ISAC Reply 1Y deleted from MRC ACHY.
ISAC Reply 1Z deleted from MRC ACHY.
ISAC Reply 3AEE added to MRC ABTJ.
ISAC Reply 3HOU added to MRC ABTJ.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED37077*)
APGFDDESIGN TYPE
INDICATES THE DESIGN TYPE OF THE ITEM.
Enter the applicable reply code from the table below
(APGFDBKU*;APGFDDBS$DBKV*;APGFDDBS$$DBKV*)
| Table 1 |
| Reply Code (AK54) | Reply |
| A | ANY ACCEPTABLE |
| CFU | ARMOR PLATED |
| BKV | CERAMIC |
| DBS | FABRIC |
| DBT | FABRIC REINFORCED RUBBER |
| ADE | LAMINATED |
| DBW | METAL |
| BKU | METAL COMPOSITE |
| DBX | METAL W/FABRIC FLAP |
| DBY | METAL W/RUBBER FLAP |
| CJS | NONSLIP |
| FTH | PLASTIC |
| APU | PLASTIC, POLYETHYLENE |
| DAA | RUBBER |
SHPEDSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDAVX*;SHPEDAAY$DAPL*;SHPEDAAY$$DAPL*)
| Table 1 |
| Reply Code (AD07) | Reply |
| AAE | ANGULAR |
| BH | ANGULAR |
| AAY | BENT DIAMOND |
| ABS | CIRCULAR |
| BLC | CONVOLUTED |
| KX | CURVED |
| AFC | FLAT |
| AJG | IRREGULAR |
| AND | RECTANGULAR |
| ANN | RECTANGULAR W/ROUNDED CORNERS |
| BKR | RECTANGULAR WITH HOLES |
| APL | ROUND |
| AVX | SQUARE W/CUT CORNERS |
| ASW | SQUARE W/ROUNDED CORNERS |
| AVW | SQUARE W/SQUARED CORNERS |
| ASZ | SQUARED |
| ATG | STRAIGHT |
| BK | STRAIGHT |
BTMBDMOUNTING ATTACHMENT
AN INDICATION OF WHETHER OR NOT A MOUNTING ATTACHMENT(S) IS INCLUDED. PLEASE USE MRC ABFF OR TMQY IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(BTMBDC)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
AJJZ*DDOCUMENT TYPE
INDICATES THE TYPE OF DOCUMENT BY THE TITLE.
Enter the applicable reply code from the table below
(AJJZDAC)
| Table 1 |
| Reply Code (AF70) | Reply |
| BD | BILL OF MATERIAL |
| BE | CATALOG SHEET |
| CD | COMMERCIAL CATALOG |
| CH | DESIGN CONTROL DRAWING |
| AN | ENGINEERING DRAWING |
| BG | ENGINEERING PARTS LIST |
| BK | INDUSTRIAL DRAWING |
| BN | MILITARY DRAWING |
| AC | MILITARY SPECIFICATION |
| AF | MILITARY STANDARD |
| BT | PARTS LIST |
| FE | SOURCE CONTROL DRAWING |
| AB | TECHNICAL MANUAL |
CSYX*JNOMINAL HOLE DIAMETER AND QUANTITY
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR HOLE,AND TERMINATES AT THE CIRCUMFERENCE,AND THE NUMBER OF HOLES.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSYXJLAAS2.0*;CSYXJLAAS2.0$$JLAAS2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AP65) | Reply |
| AAH | EIGHT HOLES |
| AAT | EIGHTEEN HOLES |
| AAL | ELEVEN HOLES |
| AAQ | FIFTEEN HOLES |
| AAE | FIVE HOLES |
| AAD | FOUR HOLES |
| AAP | FOURTEEN HOLES |
| AAJ | NINE HOLES |
| AAU | NINETEEN HOLES |
| AAA | ONE HOLE |
| AAG | SEVEN HOLES |
| AAS | SEVENTEEN HOLES |
| AAF | SIX HOLES |
| AAR | SIXTEEN HOLES |
| AAK | TEN HOLES |
| AAN | THIRTEEN HOLES |
| AAC | THREE HOLES |
| AAM | TWELVE HOLES |
| ABD | TWENTY EIGHT HOLES |
| ABA | TWENTY FIVE HOLES |
| AAZ | TWENTY FOUR HOLES |
| AAV | TWENTY HOLES |
| ABE | TWENTY NINE HOLES |
| AAW | TWENTY ONE HOLES |
| ABC | TWENTY SEVEN HOLES |
| ABB | TWENTY SIX HOLES |
| AAY | TWENTY THREE HOLES |
| AAX | TWENTY TWO HOLES |
| AAB | TWO HOLES |
ATPP*ASLOT QUANTITY
THE NUMBER OF SLOTS IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ATPPA10*)
ABGC*JSLOT WIDTH
THE DISTANCE,MEASURED ALONG A STRAIGHT LINE PERPENDICULAR TO THE LONGITUDINAL AXIS OF THE SLOT,FROM ONE EDGE TO THE OTHER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGCJAC2.0*;ABGCJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGD*JSLOT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SLOT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGDJAA2.0*;ABGDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
LAQS*JSLOT LENGTH AND QUANTITY
THE DISTANCE MEASURED ALONG A STRAIGHT LINE PERPENDICULAR TO THE LONGITUDINAL AXIS OF THE SLOT FROM ONE EDGE TO THE OTHER.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(LAQSJABBBG2.0*;LAQSJABBBG2.0$JABBBG2.0*;LAQSJABBBG2.0$$JABBBG2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AP65) | Reply |
| BBI | EIGHT SLOTS |
| BBF | FIVE SLOTS |
| BBE | FOUR SLOTS |
| BBJ | NINE SLOTS |
| BBB | ONE SLOT |
| BBH | SEVEN SLOTS |
| BBG | SIX SLOTS |
| BBK | TEN SLOTS |
| BBD | THREE SLOTS |
| BBC | TWO SLOTS |
WAQS*JSLOT WIDTH AND QUANTITY
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SLOT, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(WAQSJLABBG2.0*;WAQSJLABBG2.0$JLABBG2.0*;WAQSJLABBG2.0$$JLABBG2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AP65) | Reply |
| BBI | EIGHT SLOTS |
| BBF | FIVE SLOTS |
| BBE | FOUR SLOTS |
| BBJ | NINE SLOTS |
| BBB | ONE SLOT |
| BBH | SEVEN SLOTS |
| BBG | SIX SLOTS |
| BBK | TEN SLOTS |
| BBD | THREE SLOTS |
| BBC | TWO SLOTS |
AJJW*ACOMPONENT QUANTITY
THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJJWA10*)
CZNF*ACOLOR CHIP NUMBER
THE IDENTIFYING NUMBER FOR THE COLOR CHIP.
Enter the alpha-numeric reply with a minimum of one character.
(CZNFAF7)
AJJX*DCOMPONENT DOCUMENT ORIGIN
THE ORIGINATOR /GOVERNMENTAL,INDUSTRIAL,OR OTHERWISE/ OF THE AVAILABLE DOCUMENT WHICH LISTS THE COMPONENT/S/ OF THE ITEM.
Enter the applicable reply code from the table below
(AJJXDAD)
| Table 1 |
| Reply Code (AF59) | Reply |
| AF | GOVERNMENT |
| AD | INDUSTRIAL |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the alpha-numeric reply with a minimum of one character.
(CMLPAR8)
AJJY*ADOCUMENT SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS THE DOCUMENT.
Enter the alpha-numeric reply with five character(s) exactly.
(AJJYAP3S5X)
CYHY*AVEHICLE IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC VEHICLE.
Enter the alpha-numeric reply with a minimum of one character.
(CYHYAO5)
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDPCX000*;MATTDST4140$DZSD000*;MATTDST4140$$DZSD000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| ZSU000 | ALUMINUM ALLOY 5059 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6055 | ALUMINUM ALLOY 6055 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AA0000 | ALUMINUM ALLOY 7065 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AA0001 | ALUMINUM ALLOY 7085 |
| AL0118 | ALUMINUM ALLOY A444.0 |
| AL0280 | ALUMINUM ALLOY, 7056 |
| ZRX000 | ALUMINUM ALLOY,ARMOR PLATE |
| ZSE000 | ALUMINUM CARBIDE |
| ZSD000 | ALUMINUM OXIDE CERAMIC W/FIBERGLASS |
| CLD000 | CERAMIC |
| CTA000 | COBALT |
| ZSA000 | COMPOSITION |
| CUB000 | COPPER ALLOY |
| ZRZ000 | FABRIC |
| ZSG000 | FABRIC,FIBER,ARAMID |
| ZSF000 | FABRIC,REINFORCED PLASTIC |
| FG0000 | FIBERGLASS |
| GSA000 | GLASS |
| PCU000 | GLASS REINFORCED PLASTIC |
| PCA000 | PLASTIC |
| PCCX00 | PLASTIC ARAMID |
| PCCA00 | PLASTIC FOAM |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| ZSB000 | PLASTIC POLYCHLOROPRENE |
| PCX000 | PLASTIC POLYETHYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCBA00 | PLASTIC URETHANE |
| AAA009 | POLYETHYLENE, HIGH MODULUS (HMPE) |
| RSB000 | RESIN SILICONE |
| RCE000 | RUBBER |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RCAC00 | RUBBER NEOPRENE |
| SLB000 | SILICON CARBIDE |
| STA000 | STEEL |
| ZSC000 | STEEL ALLOY |
| ST1010 | STEEL COMP 1010 |
| ST1020 | STEEL COMP 1020 |
| ST4130 | STEEL COMP 4130 |
| ST4140 | STEEL COMP 4140 |
| ST1789 | STEEL UNS K11918 |
| ZRF000 | STEEL,ARMOR |
| STF000 | STEEL,CARBON |
| TTA000 | TITANIUM ALLOY |
| TT0053 | TITANIUM ALLOY UNS R56401 |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDAAA013*;SFTTDAZ0000$DPNB000*;SFTTDAZ0000$$DPNB000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| AZ0000 | ALUMINIZED |
| ALB000 | ALUMINUM |
| ANA000 | ANODIZE |
| AAA001 | CARC (CHEMICAL AGENT RESISTANT COATING) |
| AAA013 | CARC (CHEMICAL AGENT RESISTANT COATING), ALIPHATIC POLYURETHANE |
| AAA008 | CATHODIC ELECTRODEPOSITION |
| AAA017 | CATHODIC ELECTRODEPOSITION LEAD AND CHROMATE FREE |
| AAA002 | CHEMICAL |
| CMB000 | CHROMATE ZINC |
| MSD000 | EPOXY |
| NNC000 | NON-CHROMIC ACID RINSE |
| XXB000 | OXIDE |
| PNA000 | PAINT |
| PNB000 | PAINT HEAT RESISTANT |
| PNE000 | PAINT POLYURETHANE |
| AAA000 | PAINTED |
| PSA000 | PASSIVATE |
| AAA015 | PASSIVATED INORGANIC COATING |
| PHB000 | PHOSPHATE IRON |
| PHD000 | PHOSPHATE ZINC |
| AAA018 | PHOSPHORIC ACID |
| PCAS00 | PLASTIC ARAMID |
| AAA011 | POLYURETHANE PAINT-LEAD,CADMIUM AND HEXAVALENT CHROMIUM FREE |
| AAA004 | POWDER COATED |
| PRA000 | PRIMER |
| PSA002 | PRIMER COATING, EPOXY, WATER BASED, LEAD AND CHROMATE FREE |
| PRF000 | PRIMER EPOXY |
| PRA001 | PRIMER EPOXY-LEAD AND CHROMIUM FREE |
| AAA019 | PRIMER EPOXY-WATERBORNE |
| PRE000 | PRIMER ZINC |
| ZNM000 | PRIMER-HEXAVALENT CHROMIUM FREE |
| AAA010 | PRIMER-LEAD AND HEXAVALENT CHROMIUM FREE |
| RSE000 | RESIN, EPOXY |
| SMA000 | SMOOTH FINISH |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
ABTB*JMOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTB3AEEJLB2.0*;ABTB3AEEJLB2.0$JLB2.0*;ABTB3AEEJLB2.0$$JLB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BDK | FIRST HOLE |
| 3BDL | SECOND HOLE |
| 3BDM | THIRD HOLE |
| 3BEH | FOURTH HOLE |
| 3BEK | ALL HOLES |
| 3EFI | FIFTH HOLE |
| 3EFJ | SIXTH HOLE |
| 3EFK | SEVENTH HOLE |
| 3EFL | EIGHTH HOLE |
| 3EFM | NINTH HOLE |
| 3EFN | TENTH HOLE |
| 3EFO | ELEVENTH HOLE |
| 3EFP | TWELFTH HOLE |
| 3EFQ | THIRTEENTH HOLE |
| 3EFR | FOURTEENTH HOLE |
| 3EFY | FIRST SIZE GROUP |
| 3EFZ | SECOND SIZE GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| 3IGJ | TWENTIETH HOLE |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDAHX*;ALBYDBGH$DAMF*;ALBYDBGH$$DAMF*)
| Table 1 |
| Reply Code (AH21) | Reply |
| AHX | AIRCRAFT |
| BPX | COMBAT VEHICLE |
| BGH | FULL-TRACKED VEHICLE |
| ABX | HELICOPTER |
| AHY | SHIP |
| AMF | VEHICULAR |
BBJX*DMOUNTING POSITION
THE INSTALLED POSITION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BBJXDAEZ*;BBJXDAEJ$DACN*;BBJXDAEJ$$DACN*)
| Table 1 |
| Reply Code (AM84) | Reply |
| AET | A PILLAR,LEFT SIDE |
| AES | A PILLAR,RIGHT SIDE |
| AEV | B PILLAR,LEFT SIDE |
| AEU | B PILLAR,RIGHT SIDE |
| ACT | BACK LEFT SIDE |
| ACU | BACK RIGHT SIDE |
| ADX | BATTERY BOX |
| ACC | BODY FRONT |
| ACD | BODY REAR |
| ACE | BODY SIDE |
| ACF | BODY TOP |
| AEZ | C PILLAR,GAP |
| AEX | C PILLAR,LEFT SIDE |
| AEW | C PILLAR,RIGHT SIDE |
| AEY | C PILLAR,TOP |
| ACL | CAB |
| AGB | CENTER |
| AEN | COMMANDER SIDE |
| AER | CO-PILOT |
| AED | CO-PILOT SEAT |
| AEJ | CREW BUNK |
| AFW | DOOR |
| ADZ | ENGINE |
| AEL | ENTRANCE |
| AFM | EXTERIOR |
| AEK | FLIGHT ENGINEER |
| ADJ | FLOOR |
| ADL | FLOOR,LOWER |
| ADK | FLOOR,UPPER |
| ABG | FRONT |
| ADY | FUEL TANK |
| AEP | GALLEY |
| AFF | GUNNERS ASSY,LEFT SIDE |
| AFE | GUNNERS ASSY,RIGHT SIDE |
| AFL | INTERIOR |
| ADV | INTERIOR WINDSHIELD,LEFT SIDE |
| ADW | INTERIOR WINDSHIELD,RIGHT SIDE |
| ACG | LEFT DOOR |
| ACH | LEFT FRONT |
| AAA | LEFT INNER |
| AAB | LEFT SIDE |
| AEB | LOADMASTER SEAT,LEFT SIDE |
| AEC | LOADMASTER SEAT,RIGHT SIDE |
| LW | LOWER |
| ADT | LOWER LEFT SIDE |
| ADU | LOWER RIGHT SIDE |
| AEM | MIDDLE |
| AEG | NAVIGATOR,AFT |
| AEH | NOSE WHEEL |
| AEQ | PILOT |
| AEF | PILOT SEAT |
| ABK | REAR |
| AEA | REAR CARGO BED |
| ABV | REAR CARGO DOOR |
| ADM | REAR SEAT,DRIVER'S SIDE |
| ADN | REAR SEAT,PASSENGER SIDE |
| ACJ | RIGHT DOOR |
| ACK | RIGHT FRONT |
| AAC | RIGHT SIDE |
| ADF | ROOF |
| ACM | SIDE PANEL |
| ACN | TOP |
| UP | UPPER |
| ADR | WHEEL WELL,FORWARD |
| ADP | WHEEL WELL,INSIDE,DRIVER SIDE |
| ADQ | WHEEL WELL,INSIDE,PASSENGER SIDE |
| ADS | WHEEL WELL,UPPER |
| AFA | WINDOW FRAME |
| AFD | WINDOW,AFT,MIDDLE |
| AFB | WINDOW,AFT,UPPER |
| AFC | WINDOW,FWD,UPPER |
ACHY*DMOUNTING HOLE TYPE
INDICATES THE TYPE OF HOLES PROVIDED IN THE ITEM TO FACILITATE MOUNTING TO ANOTHER ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACHY3EFTDW*;ACHY3EFTDW$DG*;ACHY3EFTDW$$DG*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BDK | FIRST HOLE |
| 3BDL | SECOND HOLE |
| 3BDM | THIRD HOLE |
| 3BEH | FOURTH HOLE |
| 3BEK | ALL HOLES |
| 3EFI | FIFTH HOLE |
| 3EFJ | SIXTH HOLE |
| 3EFK | SEVENTH HOLE |
| 3EFL | EIGHTH HOLE |
| 3EFN | TENTH HOLE |
| 3EFT | SIXTEENTH HOLE |
| 3EFW | SINGLE HOLE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB68) | Reply |
| A | COUNTERBORED |
| B | COUNTERSUNK |
| Q | KEYHOLE |
| Y | OBLONG |
| L | PIVOT PIN |
| C | PLAIN |
| Z | RIVETED |
| W | ROUND, THREADED |
| T | ROUND, UNTHREADED |
| N | SERRATED |
| P | SLOTTED |
| M | STUD |
| R | TAPER HOLE |
| F | TAPER PIN PILOT |
| K | TAPERED |
| D | THREADED |
| G | THREADED-COUNTERBORED |
| H | THREADED-COUNTERSUNK |
| S | THREADED-EXTRUDED |
| U | THRU HOLE |
| E | UNTHREADED |
| J | UNTHREADED-COUNTERSUNK |
ABTJ*AMOUNTING HOLE QUANTITY
THE NUMBER OF MOUNTING HOLES PROVIDED.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(ABTJ3AEEA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDNP*;THSDDSM$DUN*;THSDDSM$$DUN*)
| Table 1 |
| Reply Code (AH06) | Reply |
| SM | ISO M |
| SS | ISO S |
| NP | NPT |
| UN | UN |
| NF | UNF |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(AAJFDAAG)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAR8)
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDVY0000*;HUESDYE0000$DLD0008*;HUESDYE0000$$DLD0008*)
| Table 1 |
| Reply Code (AD06) | Reply |
| A | ANY ACCEPTABLE |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BU0312 | BLUE, US AIR FORCE |
| BR0000 | BROWN |
| BR0190 | BROWN 383, 30051 |
| MS0240 | BUFF, DEEP |
| CL0000 | CLEAR |
| MS0226 | FAWN |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0502 | GREEN, 25433 |
| GR0494 | GREEN, 383 |
| GR0020 | GREEN, DARK |
| GR0024 | GREEN, FOREST |
| GR0011 | GREEN, OLIVE |
| GR0510 | GREEN, OPAQUE |
| GR0132 | GREEN, SPANISH |
| VY0000 | IVORY |
| LD0008 | OLIVE |
| LD0000 | OLIVE DRAB |
| RE0000 | RED |
| MS0413 | SEAFOAM GREEN |
| SL0000 | SILVER |
| TA0000 | TAN |
| TA0099 | TAN, 686A |
| WH0000 | WHITE |
| YE0000 | YELLOW |
IF YOU ANSWER MRC HDCL, YOU MUST ANSWER MRC (HUES)
HDCL*JCOLOR DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,MANUFACTURERS REFERENCE,OR INDEX SYSTEM AND THE CLASIFICATION DESIGNATION, USED TO IDENTIFY COLOR, COLOR SELECTION, COLOR MATCHING AND QUALITY CONTROL OF A SPECIFIC COLOR.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(HDCLJEATEXT1234*;HDCLJEATEXT1234$$JEATEXT1234*;HDCLJEATEXT1234$JEATEXT1234*;HDCL1BJEATEXT1234*;HDCL1BJEATEXT1234$$JEATEXT1234*;HDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP93) | Reply |
| M | 10TH COLOR RESPONSE |
| N | 11TH COLOR RESPONSE |
| P | 12TH COLOR RESPONSE |
| Q | 13TH COLOR RESPONSE |
| R | 14TH COLOR RESPONSE |
| S | 15TH COLOR RESPONSE |
| T | 16TH COLOR RESPONSE |
| U | 17TH COLOR RESPONSE |
| W | 18TH COLOR RESPONSE |
| X | 19TH COLOR RESPONSE |
| B | 1ST COLOR RESPONSE |
| Y | 20TH COLOR RESPONSE |
| Z | 21ST COLOR RESPONSE |
| V | 22ND COLOR RESPONSE |
| C | 2ND COLOR RESPONSE |
| D | 3RD COLOR RESPONSE |
| E | 4TH COLOR RESPONSE |
| F | 5TH COLOR RESPONSE |
| H | 6TH COLOR RESPONSE |
| J | 7TH COLOR RESPONSE |
| K | 8TH COLOR RESPONSE |
| L | 9TH COLOR RESPONSE |
| G | ALL COLOR RESPONSE |
| A | SINGLE COLOR RESPONSE |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAB2.0*;ABKWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUM*JOVERALL THICKNESS
AN OVERALL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUMJAC2.0*;ADUMJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAXX*DMOUNTING TYPE
INDICATES THE TYPE OF MOUNT UTILIZED TO SUPPORT THE ITEM.
Enter the applicable reply code from the table below
(AAXXDNH*;AAXXDPB$$DNQ*)
| Table 1 |
| Reply Code (AA78) | Reply |
| NH | ADJUSTABLE |
| A | ANY ACCEPTABLE |
| NJ | BACK MOUNTED FOR SEAT EJECTION MECHANISM |
| NK | BACK MOUNTED ON TUBE |
| ABH | BASE CONE TO FLOOR |
| NL | BELT DOWN |
| ABJ | BOLT DOWN |
| CL | BRACKET |
| NM | BULKHEAD |
| NN | COLUMNAR |
| NP | COWL |
| NQ | FITTING |
| DC | FIXED |
| CA | FLOOR |
| TV | GLUED |
| JT | HINGE |
| LD | HOLE |
| NR | LEAF SPRING |
| NS | LEG SUPPORT |
| BM | PEDESTAL |
| NT | PIVOTAL |
| TW | POLYURETHANE ADHESIVE |
| NW | QUICK DISCONNECT |
| NX | RETAINING ROD |
| AFM | ROTARY PEDESTAL |
| AHV | SCREW |
| NY | SEAT FRAME |
| NZ | SEAT SUPPORT FRAME |
| AFN | SPRING-LOADED HINGE |
| PA | STRAP |
| KQ | STUD |
| BN | SUPPORT |
| PB | THREAD CONNECTION |
| PC | THREAD TUBE CONNECTION |
| AKR | THREADED FASTENER |
| PD | TRACK |
| PF | TRACK W/O TRACK |
| PE | TRACK W/TRACK |
| CQ | WALL |
| EG | WALL BRACKET |
AKYN*GFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter clear text.
(AKYNGCLEARTEXT)
HEAT*DHEAT TREATMENT
A COMBINATION OF TIMED HEATING AND COOLING OPERATIONS APPLIED FOR THE PURPOSE OF ANNEALING OR HARDENING THE ITEM.
Enter the applicable reply code from the table below
(HEATDTP*;HEATDTS$DEN*;HEATDTS$$DEN*)
| Table 1 |
| Reply Code (AD05) | Reply |
| BP | ANNEALED |
| CR | COLD DRAWN |
| CX | COLD ROLLED |
| CU | EXTRUDED |
| GB | H-116 SPECIALLY TREATED |
| TP | H-24 STRAIN HARDENED, PARTIALLY ANNEALED TO 1/2 HARD |
| TQ | H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD |
| QP | H-321 STRAIN HARDENED |
| TR | H-34 STRAIN HARDENED, STABILIZED TO 1/2 HARD |
| TS | H-36 STRAIN HARDENED, STABILIZED TO 3/4 HARD |
| TT | H-38 STRAIN HARDENED, STABILIZED TO FULL HARD |
| CH | HARD |
| CY | HARDENED |
| CT | HOT ROLLED |
| JQ | PICKLED |
| EN | QUENCHED |
| JT | ROLLED |
| TW | T-6 SOLUTION HEAT TREATED, ARTIFICALLY AGED |
| RX | T-651 SOLUTION HEAT TREATED, ARTIFICALLY AGED, AND STRESS RELIEVED BY STRETCHING |
| RK | T-6510 SOLUTION HEAT TREATED |
| RL | T-6511 SOLUTION HEAT TREATED |
| EP | TEMPERED |
CQFM*JHARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF AN ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQFMJRDB2.0*;CQFMJRDB2.0$JRDB2.0*;CQFMJRDB2.0$$JRDB2.1*)
| Table 1 |
| Reply Code (AC26) | Reply |
| AS | ASTM SCALE |
| RA | ROCKWELL A |
| RB | ROCKWELL B |
| RC | ROCKWELL C |
| RD | ROCKWELL D |
| RE | ROCKWELL E |
| AG | SHORE |
| SA | SHORE DUROMETER A |
| SB | SHORE DUROMETER B |
| SE | SHORE DUROMETER C |
| SD | SHORE DUROMETER D |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ092*;HZRDDHAZ222$$DHAZ030*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ222 | IRON |
| HAZ092 | MAGNESIUM |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ285 | PLASTIC |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CYHX*AVEHICLE DESIGN CONTROL ACTIVITY
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER ENTITY,WHICH CONTROLS THE DESIGN OF THE VEHICLE.
Enter the alpha-numeric reply with five character(s) exactly.
(CYHXAE8X0P)
PTPM*GPRETREATMENT PREPARATION METHOD
THE MEANS BY WHICH THE SURFACE IS PREPARED FOR THE SURFACE TREATMENT APLICATION. MRC DISCONTINUED WITH NO REPLACEMENT ON 01/12/2024.
Enter clear text.
(PTPMGCLEARTEXT)
BBYQ*JTUBE OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE TUBE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BBYQJLB2.0*;BBYQJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AQBA*JINSULATION SPACER OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE INSULATION SPACER,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AQBAJAB2.0*;AQBAJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information