Metal sheet limited to 0.005 inch or 0.13 mm thickness. Excludes:GOLD LEAF.

FSC Information

6520	Dental Instruments, Equipment, and Supplies
9515	Plate, Sheet, Strip, Foil, and Leaf
9535	Plate, Sheet, Strip, and Foil; Nonferrous Base Metal
9545	Plate, Sheet, Strip, Foil, and Wire: Precious Metal

Colloquial Information

G0047	ALUMINUM FOIL
J4427	LEAD FOIL

Change List

ISAC Reply 3ACR added to MRC SFCD.

ISAC Reply 3AEE added to MRC SFCD.

ISAC Reply 3AFG added to MRC SFCD.

ISAC Reply 3AFJ added to MRC SFCD.

ISAC Reply 3AUC added to MRC SFCD.

ISAC Reply 3AUW added to MRC SFCD.

ISAC Reply 3HOU added to MRC SFCD.

ISAC Reply 1A deleted from MRC SFCD.

ISAC Reply 1B deleted from MRC SFCD.

ISAC Reply 1C deleted from MRC SFCD.

ISAC Reply 1D deleted from MRC SFCD.

ISAC Reply 1E deleted from MRC SFCD.

ISAC Reply 1F deleted from MRC SFCD.

ISAC Reply 3AEE added to MRC ABRY.

ISAC Reply 3HOU added to MRC ABRY.

ISAC Reply 3AEE added to MRC ADWH.

ISAC Reply 3HOU added to MRC ADWH.

ISAC Reply 3AEE added to MRC ZZZK.

ISAC Reply 3HOU added to MRC ZZZK.

NAMEDITEM NAME

NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.

Enter the item name code.

(NAMED37020*)

MATTDMATERIAL

THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.

Enter the applicable reply code from the table below

(MATTDST0301*;MATTDAUA000$DCUB000*;MATTDAUA000$$DCUB000*)

Table 1
	Reply Code (MA01)	Reply
	ALA000	ALUMINUM
	ALB000	ALUMINUM ALLOY
	AL1100	ALUMINUM ALLOY 1100
	AL1145	ALUMINUM ALLOY 1145
	AL1235	ALUMINUM ALLOY 1235
	AL3003	ALUMINUM ALLOY 3003
	AL5052	ALUMINUM ALLOY 5052
	AL5056	ALUMINUM ALLOY 5056
	CUB000	COPPER ALLOY
	CU0315	COPPER ALLOY 130
	CU0706	COPPER ALLOY 706
	AUA000	GOLD
	PTA000	PLATINUM
	AG0001	SILVER UNS P07015
	STA000	STEEL
	ST0301	STEEL COMP 301
	ST0302	STEEL COMP 302
	ST0304	STEEL COMP 304
	ST0316	STEEL COMP 316
	ST0321	STEEL COMP 321
	ST0631	STEEL COMP 631
	SNB000	TIN

Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.

MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION

THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.

Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.

(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)

Table 1
	Reply Code (AP33)	Reply
	Q	AEROSPACE MATERIAL SPEC STD
	J	AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
	G	ASSN STD
	A	COMMERCIAL ITEM DESCRIPTION
	K	DEF STAN/SPEC
	B	FED SPEC
	C	FED STD
	L	GOVERNMENT STD/SPEC
	N	INTERNATIONAL STD/SPEC
	F	MFR REF
	D	MIL SPEC
	E	MIL STD
	H	NATIONAL SPEC
	P	NATIONAL STD
	M	NATIONAL STD/SPEC

Table 2
	Reply Code (AP18)	Reply
	M	10TH MATERIAL RESPONSE
	N	11TH MATERIAL RESPONSE
	P	12TH MATERIAL RESPONSE
	Q	13TH MATERIAL RESPONSE
	R	14TH MATERIAL RESPONSE
	S	15TH MATERIAL RESPONSE
	T	16TH MATERIAL RESPONSE
	U	17TH MATERIAL RESPONSE
	W	18TH MATERIAL RESPONSE
	X	19TH MATERIAL RESPONSE
	B	1ST MATERIAL RESPONSE
	Y	20TH MATERIAL RESPONSE
	Z	21ST MATERIAL RESPONSE
	V	22ND MATERIAL RESPONSE
	C	2ND MATERIAL RESPONSE
	D	3RD MATERIAL RESPONSE
	E	4TH MATERIAL RESPONSE
	F	5TH MATERIAL RESPONSE
	H	6TH MATERIAL RESPONSE
	J	7TH MATERIAL RESPONSE
	K	8TH MATERIAL RESPONSE
	L	9TH MATERIAL RESPONSE
	G	ALL MATERIAL RESPONSES
	A	SINGLE MATERIAL RESPONSE

HEAT*DHEAT TREATMENT

A COMBINATION OF TIMED HEATING AND COOLING OPERATIONS APPLIED FOR THE PURPOSE OF ANNEALING OR HARDENING THE ITEM.

Enter the applicable reply code from the table below

(HEATDBP*;HEATDTN$DUC*;HEATDTN$$DUC*)

Table 1
	Reply Code (AD05)	Reply
	GJ	AGE HARDENING
	BP	ANNEALED
	CK	ANNEALED TO A NOMINAL GRAIN SIZE 0.015
	CL	ANNEALED TO A NOMINAL GRAIN SIZE 0.025
	CM	ANNEALED TO A NOMINAL GRAIN SIZE 0.035
	CN	ANNEALED TO A NOMINAL GRAIN SIZE 0.050
	CP	ANNEALED TO A NOMINAL GRAIN SIZE 0.070
	CQ	ANNEALED TO A NOMINAL GRAIN SIZE 0.100
	FZ	ANNEALED TO A NOMINAL GRAIN SIZE 0.120
	HT	ARTIFICALLY AGED
	MP	AS CAST
	CS	AS FABRICATED
	CZ	CASEHARDENED
	CX	COLD ROLLED
	LR	DRY ANNEALED
	GA	EIGHTH HARD
	GC	EXTRA HARD
	GD	EXTRA SPRING TEMPER
	AD	F-AS FABRICATED
	AE	H-1 STRAIN HARDENED
	EX	H-111 STRAIN HARDENED
	AV	H-112 AS ROLLED
	GB	H-116 SPECIALLY TREATED
	HJ	H-117 SPECIALLY TREATED
	AF	H-12 STRAIN HARDENED, 1/4 HARD
	AG	H-14 STRAIN HARDENED, 1/2 HARD
	AH	H-16 STRAIN HARDENED, 3/4 HARD
	AJ	H-18 STRAIN HARDENED, FULL HARD
	AK	H-19 STRAIN HARDENED, EXTRA HARD
	PK	H-20 STRAIN HARDENED
	PL	H-22 STRAIN HARDENED
	PM	H-24 STRAIN HARDENED
	PN	H-26 STRAIN HARDENED
	PP	H-28 STRAIN HARDENED
	PQ	H-32 STRAIN HARDENED
	QP	H-321 STRAIN HARDENED
	QQ	H-323 STRAIN HARDENED
	PR	H-34 STRAIN HARDENED
	QR	H-343 STRAIN HARDENED
	PS	H-36 STRAIN HARDENED
	PT	H-38 STRAIN HARDENED
	CF	HALF HARD
	CH	HARD
	LS	HARD TEMPER
	GY	INTERMEDIATE TEMPER
	BC	LIGHT ANNEALED
	PW	NATURAL AGED
	GZ	NITRIDED
	CV	NORMALIZED
	AB	O-ANNEALED
	HB	OIL QUENCHED
	PX	PARTIALLY ANNEALED
	PZ	PARTIALLY ANNEALED TO 1/2 HARD
	PY	PARTIALLY ANNEALED TO 1/4 HARD
	QA	PARTIALLY ANNEALED TO 3/4 HARD
	QB	PARTIALLY ANNEALED TO FULL HARD
	CE	QUARTER HARD
	DD	QUENCH HARDENED
	EN	QUENCHED
	CD	SKIN HARD
	HD	SOFT
	BB	SOFT ANNEALED
	GE	SOFT TEMPER
	GF	SOLUTION TREATED
	BR	SPHEROIDIZED
	CJ	SPRING TEMPER
	PH	STABILIZED
	QD	STABILIZED TO 1/2 HARD
	QC	STABILIZED TO 1/4 HARD
	QE	STABILIZED TO 3/4 HARD
	QF	STABILIZED TO FULL HARD
	ME	STRAIN HARDENED
	CB	STRESS RELIEVED
	QS	STRESS RELIEVED BY STRETCHING
	QT	T-1 SOLUTION HEAT TREATED
	QG	T-3 SOLUTION HEAT TREATED
	RB	T-351 SOLUTION HEAT TREATED
	RF	T-3510 SOLUTION HEAT TREATED
	RG	T-3511 SOLUTION HEAT TREATED
	QH	T-36 SOLUTION HEAT TREATED
	TM	T-361 SOLUTION HEAT TREATED
	QJ	T-4 SOLUTION HEAT TREATED
	RC	T-451 SOLUTION HEAT TREATED
	RH	T-4510 SOLUTION HEAT TREATED
	RJ	T-4511 SOLUTION HEAT TREATED
	QW	T-5 SOLUTION HEAT TREATED
	TC	T-52 SOLUTION HEAT TREATED
	QK	T-6 SOLUTION HEAT TREATED
	SD	T-62 SOLUTION HEAT TREATED
	RD	T-651 SOLUTION HEAT TREATED
	RK	T-6510 SOLUTION HEAT TREATED
	RL	T-6511 SOLUTION HEAT TREATED
	QY	T-73 SOLUTION HEAT TREATED
	TB	T-7351 SOLUTION HEAT TREATED
	RQ	T-73510 SOLUTION HEAT TREATED
	RR	T-73511 SOLUTION HEAT TREATED
	TN	T-7451 SOLUTION HEAT TREATED
	QZ	T-76 SOLUTION HEAT TREATED
	RM	T-7651 SOLUTION HEAT TREATED
	RS	T-76510 SOLUTION HEAT TREATED
	RT	T-76511 SOLUTION HEAT TREATED
	QX	T-8 SOLUTION HEAT TREATED
	QM	T-81 SOLUTION HEAT TREATED
	RA	T-84 SOLUTION HEAT TREATED
	RE	T-851 SOLUTION HEAT TREATED
	RN	T-8510 SOLUTION HEAT TREATED
	RP	T-8511 SOLUTION HEAT TREATED
	QL	T-86 SOLUTION HEAT TREATED
	FJ	T-87PRECIPITATION HEAT TREATED
	UC	TEMPER DESIGNATION, T861
	EP	TEMPERED
	CG	THREE QUARTERS HARD

SFCD*DSURFACE CONDITION

THE CONDITION OF THE ITEM WITH RESPECT TO THE TEXTURE OF THE SURFACE.

Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2

(SFCD3AEEDSN*;SFCD3AEEDSN$DPK*;SFCD3AEEDSN$$DPK*)

Table 1
	ISAC Field Indicator (5000)	Location
	3ACR	END
	3AEE	OVERALL
	3AFG	BOTH SIDES
	3AFJ	ONE SIDE
	3AUC	INSIDE
	3AUW	OUTSIDE
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AN72)	Reply
	BB	BEST BRIGHT
	BT	BRIGHT
	CD	CENTERLESS GROUND
	CP	CHROME PICKLED
	DS	DESCALED
	DL	DULL
	DM	DULL MATTE
	GR	GROUND
	MA	MACHINE
	AF	OIL FREE
	AL	OILED
	PK	PICKLED
	PL	POLISHED
	PG	PRECISION GROUND
	RM	ROUGH MACHINED
	RT	ROUGH TURNED
	SB	SAND BLASTED
	SN	SATIN
	TN	TURNED

ABRY*JLENGTH

A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.

Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABRY3AEEJAA2.0*;ABRY3AEEJAA2.0$JAA2.0*;ABRY3AEEJAA2.0$$JAA2.1*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AA05)	Reply
	F	FEET
	A	INCHES
	M	METERS
	L	MILLIMETERS

Table 3
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

IF STYLE/REPLY CODE(s) A1 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADVM and AKSV and CXJG and CXKF) or (ABGL and ABRY and ADPC and ADVM and AKSV and CXJG and ADPD)

IF STYLE/REPLY CODE(s) A3 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADPD and ADVM and AKSV and BMNT and CXKF) or (ABGL and ABRY and ADPC and ADPD and ADVM and AKSV and BMNT and CXJG)

IF STYLE/REPLY CODE(s) A2 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADPD and ADVM and AKSV and BMNS and BMNT)

IF STYLE/REPLY CODE(s) A5 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADPD and ADVM and CXKF and BMNQ and BMNR)

IF STYLE/REPLY CODE(s) A10 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABGL and ABRY and ADVM)

IF STYLE/REPLY CODE(s) D1 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ADWH and ADVM)

AGTALBASIC SHAPE STYLE

THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE BASIC APPEARANCE OF THE ITEM.

Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.

(AGTALA5)

Table 1
Physical Drawing ID	Reply Code (STYL)	Reply
AAR1877	A1	ROUND
AAR1881	A10	SOLID
AAR1878	A2	ROUND
AAR1879	A3	ROUND
AAR1880	A5	SLOTTED
AAR1893	D1	FLAT

ABGL*JWIDTH

A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ABGLJAC2.0*;ABGLJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADPC*JDISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADPCJAC2.0*;ADPCJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADPD*JDISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADPDJAA2.0*;ADPDJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADVK*JCROSS SECTION INSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CROSS SECTION,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADVKJAB2.0*;ADVKJAB2.0$$JAB2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADVL*JCROSS SECTION OUTSIDE DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CROSS SECTION,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADVLJAA2.0*;ADVLJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADVM*JCROSS-SECTIONAL THICKNESS

A MEASUREMENT OF THE SMALLEST DIMENSION OF A CROSS SECTION,IN DISTINCTION FROM LENGTH OR WIDTH.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(ADVMJAA2.0*;ADVMJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

ADWH*JCROSS-SECTIONAL WIDTH

A MEASUREMENT OF THE CROSS SECTION TAKEN AT RIGHT ANGLES TO THE LENGTH,IN DISTINCTION FROM THICKNESS.

(ADWH3AEEJAB2.0*;ADWH3AEEJAB2.0$JAB2.0*;ADWH3AEEJAB2.0$$JAB2.1*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 3
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

AKSV*JPERFORATION DIAMETER

THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE OPENING,AND TERMINATES AT THE CIRCUMFERENCE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(AKSVJAC2.0*;AKSVJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CXJG*JPERFORATION CENTER TO CENTER DISTANCE ALONG LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CXJGJAC2.0*;CXJGJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

CXKF*JPERFORATION CENTER TO CENTER DISTANCE ALONG WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CXKFJAA2.0*;CXKFJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BMNQ*JPERFORATION ELONGATION LENGTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BMNQJAA2.0*;BMNQJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BMNR*JPERFORATION ELONGATION WIDTH

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BMNRJAC2.0*;BMNRJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BMNS*JPERFORATION CENTER TO CENTER DISTANCE ALONG UPWARD SLOPE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BMNSJAA2.0*;BMNSJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BMNT*JPERFORATION CENTER TO CENTER DISTANCE ALONG DOWNWARD SLOPE

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BMNTJAC2.0*;BMNTJAC2.0$$JAC2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BMNZ*JCROSS-SECTIONAL WIDTH ACROSS FLATS

THE SHORTEST STRAIGHT LINE BETWEEN CROSS-SECTIONAL FLATS,PERPENDICULAR TO THE HEIGHT OF THE ITEM.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BMNZJAA2.0*;BMNZJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BMPB*JCROSS-SECTIONAL RADIUS

NONE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BMPBJAA2.0*;BMPBJAA2.0$$JAA2.1*)

Table 1
	Reply Code (AA05)	Reply
	A	INCHES
	L	MILLIMETERS

Table 2
	Reply Code (AC20)	Reply
	A	NOMINAL
	B	MINIMUM
	C	MAXIMUM

BRFD*JWEIGHT PER UNIT MEASURE

THE WEIGHT OF THE ITEM WITH RESPECT TO A UNIT OF MEASURE.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BRFDJBL2.0*)

Table 1
	Reply Code (AG69)	Reply
	AW	KILOGRAMS PER METER
	AQ	KILOGRAMS PER SQUARE METER
	BL	POUNDS PER LINEAR FOOT
	BE	POUNDS PER PIECE
	BD	POUNDS PER SQUARE FOOT

PKTY*DUNIT PACKAGE TYPE

INDICATES THE TYPE OF CONTAINER IN WHICH THE ITEM OF SUPPLY IS PACKAGED. PLEASE USE MRC ALQG IN PLACE OF THIS DISCONTINUED MRC.

Enter the applicable reply code from the table below

(PKTYDACD*;PKTYDAQK$DACX*)

Table 1
	Reply Code (AN65)	Reply
	ACD	BOX
	ACX	CARTON
	AQK	DISPENSER, W/CUTTER

FEAT*GSPECIAL FEATURES

THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.

Enter the reply in clear text. Separate multiple replies with a semicolon.

(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)

TEST*JTEST DATA DOCUMENT

THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.

Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.

(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)

Table 1
	Reply Code (AC28)	Reply
	A	SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
	B	STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
	C	DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)

SPCL*GSPECIAL TEST FEATURES

TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.

Enter the reply in clear text.

(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)

ZZZK*JSPECIFICATION/STANDARD DATA

THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.

Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.

(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)

Table 1
	ISAC Field Indicator (5000)	Location
	3AEE	OVERALL
	3HOU	LOCATION NOT OTHERWISE SPECIFIED

Table 2
	Reply Code (AN62)	Reply
	V	FEDERAL MOTOR VEHICLE SAFETY STANDARD
	F	FLAMMABILITY STANDARD
	S	GOVERNMENT SPECIFICATION
	T	GOVERNMENT STANDARD
	U	INTERNATIONAL STD/SPEC
	D	MANUFACTURERS SOURCE CONTROL
	R	MANUFACTURERS SPECIFICATION
	N	MANUFACTURERS SPECIFICATION CONTROL
	M	MANUFACTURERS STANDARD
	B	NATIONAL STD/SPEC
	A	PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
	P	PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.

ZZZT*JNONDEFINITIVE SPEC/STD DATA

THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.

Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.

(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)

Table 1
	Reply Code (AD08)	Reply
	AL	ALLOY
	BE	ANNEALED
	AN	ANNEX
	AP	APPENDIX
	AC	APPLICABILITY CLASS
	AR	ARRANGEMENT
	AS	ASSEMBLY
	AB	ASSORTMENT
	BF	BOND
	BX	BOX
	CY	CAPACITY
	CA	CASE
	CT	CATEGORY
	CF	CIRCUMFERENCE
	CL	CLASS
	CE	CODE
	CR	COLOR
	CC	COMBINATION CODE
	CN	COMPONENT
	CP	COMPOSITION
	CM	COMPOUND
	CD	CONDITION
	AV	CONFIGURATION
	CS	CONSTRUCTION
	BG	CORE CONDITION
	CB	CUT OFF
	AM	DELAY CLASS
	DE	DESIGN
	DG	DESIGNATOR
	DW	DRAWING NUMBER
	DU	DUPLEX
	EG	EDGE
	EN	END
	FY	FAMILY
	FG	FIGURE
	AK	FILE NUMBER
	FN	FINISH
	FB	FLAVOR
	BH	FLUX PERCENTAGE
	FM	FORM
	FA	FORMULA
	AJ	GAGE STOCK NUMBER
	GR	GRADE
	GA	GRADUATION
	AX	GRANULES
	AY	GRIT
	GB	GROUND
	GP	GROUP
	HA	HEAVY DUTY
	BA	IMAGE COLOR
	NS	INSERT
	TM	ITEM
	KD	KIND
	KT	KIT
	LG	LENGTH
	LV	LEVEL
	LT	LIMIT
	MK	MARK
	AA	MARKER
	AD	MASK APERTURE
	ML	MATERIAL
	BB	MAXIMUM DENSITY
	TA	MEDIUM TEMPER
	MH	MESH
	ME	METHOD
	BC	MINIMUM DENSITY
	MD	MODEL
	MT	MOUNTING
	AQ	NATURAL
	AU	NON-DELAY CLASS
	NR	NUMBER
	BL	OUTFIT NUMBER
	PA	PARAGRAPH
	PT	PART
	PN	PATTERN
	PC	PHYSICAL CONDITION
	PS	PIECE
	PL	PLAN
	PR	POINT
	PD	POLISHED
	PB	PRESSURE RATING
	QA	QUALITY
	QB	QUENCHED
	RN	RANGE
	AE	RAPID
	RT	RATING
	RF	REFERENCE NUMBER
	RA	REGULAR DUTY
	BJ	RMA FLUX
	SJ	SALIENT CHARACTERISTICS
	SC	SCHEDULE
	SB	SECTION
	SL	SELECTION
	BD	SERIALIZED
	SE	SERIES
	SV	SERVICE
	SX	SET
	SA	SHADE
	SH	SHAPE
	SG	SHEET
	SZ	SIZE
	AG	SLOW
	TC	SOFT TEMPER
	SK	SOURCE
	PZ	SPECIES
	SQ	SPECIFICATION SHEET
	SD	SPEED
	AW	STANDARD
	SR	STRAIGHT
	ST	STYLE
	SS	SUBCLASS
	SF	SUBFORM
	SP	SUBTYPE
	BK	SUPPORT
	SN	SURFACE CONDITION
	SY	SYMBOL
	SM	SYSTEM
	TB	TABLE
	TN	TANNAGE
	TP	TEMPER
	TX	TEXTURE
	TK	THICKNESS
	TT	TREATMENT
	TR	TRIM
	TY	TYPE
	YN	UNIT
	AZ	UNSERIALIZED
	VA	VARIETY
	WT	WEIGHT
	WD	WIDTH

ZZZW*GDEPARTURE FROM CITED DOCUMENT

THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.

Enter the reply in clear text.

(ZZZWGAS MODIFIED BY MATERIAL*)

ZZZX*GDEPARTURE FROM CITED DESIGNATOR

THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.

Enter the reply in clear text.

(ZZZXGAS MODIFIED BY MATERIAL*)

ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS

A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.

Enter the reply in clear text.

(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)

Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.

CRTL*ACRITICALITY CODE JUSTIFICATION

THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.

Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.

(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)

If document availability code B, D, F, OR H, reply to MRC PRPY.

PRPY*APROPRIETARY CHARACTERISTICS

IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.

Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.

(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)

ELRN*GEXTRA LONG REFERENCE NUMBER

A REFERENCE NUMBER EXCEEDING 32 POSITIONS.

Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.

(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)

In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.

ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION

A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.

Enter the Reply Code from the table below.

(ELCDDA*)

Table 1
	Reply Code (AN58)	Reply
	A	ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD

CBME*JCUBIC MEASURE

A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(CBMEJCF2.0*)

Table 1
	Reply Code (AN76)	Reply
	CC	CUBIC CENTIMETERS
	CF	CUBIC FEET
	CN	CUBIC INCHES
	CM	CUBIC METERS
	CB	CUBIC MILLIMETERS

PRMT*DPRECIOUS MATERIAL

IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.

Enter the applicable reply code from the table below

(PRMTDRHA000*;PRMTDAGA000$DAUA000*;PRMTDAGA000$$DAUA000*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

PMWT*JPRECIOUS MATERIAL AND WEIGHT

AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.

Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(PMWTJIRA000F2.0*;PMWTJIRA000F2.0$$JIRA000F2.1*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

Table 2
	Reply Code (AG14)	Reply
	E	GRAINS, TROY
	R	GRAMS
	F	OUNCES, TROY

PMLC*JPRECIOUS MATERIAL AND LOCATION

AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.

Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.

(PMLCJAUA0002.0*;PMLCJAUA0002.0$JAUA0002.0*;PMLCJAUA0002.0$$JAUA0002.1*)

Table 1
	Reply Code (MA01)	Reply
	AUA000	GOLD
	IRA000	IRIDIUM
	AZA000	OSMIUM
	PDA000	PALLADIUM
	PTA000	PLATINUM
	RHA000	RHODIUM
	RTA000	RUTHENIUM
	AGA000	SILVER

ALBY*DUSAGE DESIGN

INDICATES THE DESIGNED USE OF THE ITEM.

Enter the applicable reply code from the table below

(ALBYDAMC*;ALBYDAMD$DAHX*;ALBYDAMD$$DAHX*)

Table 1
	Reply Code (AH21)	Reply
	AHX	AIRCRAFT
	AAG	DENTAL
	BAS	FOOD HANDLING
	BAR	FOOD PROCESSING
	AMD	HULL
	AMC	SHIPBUILDING
	AME	STRUCTURAL

BRFB*JCOVERING AREA

THE AREA,PER UNIT OF WEIGHT,THE ITEM WILL COVER.

Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.

(BRFBJHJ2.0*)

Table 1
	Reply Code (AG67)	Reply
	HJ	SQUARE INCHES PER POUND
	HK	SQUARE MILLIMETERS PER KILOGRAM

BRFC*DCOATING METHOD

THE MEANS BY WHICH THE COATING IS APPLIED.

Enter the applicable reply code from the table below

(BRFCDAF*;BRFCDAE$DAE*)

Table 1
	Reply Code (AK01)	Reply
	AE	ELECTROPLATED
	AF	HOT DIPPED

BBRG*DSTORAGE TYPE

INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.

Enter the applicable reply code from the table below

(BBRGDAJ*;BBRGDAC$DAM*;BBRGDAC$$DAM*)

Table 1
	Reply Code (AM81)	Reply
	AC	CLOSED SHED
	AD	CONTROLLED HUMIDITY WAREHOUSE
	AM	DEHUMIDIFIED WAREHOUSE
	AE	GENERAL PURPOSE WAREHOUSE
	AN	HEATED WAREHOUSE
	AH	OPEN SHED
	AJ	UNHEATED WAREHOUSE