A device consisting of a metal cylinder filled or to be filled with a desiccant, placed in the liquid or suction line of a mechanical refrigeration system for the purpose of removing moisture and/or foreign matter. It may have an integral strainer.
ISAC Reply 3AEE added to MRC AZSZ.
ISAC Reply 3HOU added to MRC AZSZ.
ISAC Reply 3AEE added to MRC AWPS.
ISAC Reply 3AET added to MRC AWPS.
ISAC Reply 3AEU added to MRC AWPS.
ISAC Reply 3AEV added to MRC AWPS.
ISAC Reply 3HOU added to MRC AWPS.
ISAC Reply 1A deleted from MRC AWPS.
ISAC Reply 1B deleted from MRC AWPS.
ISAC Reply 1Y deleted from MRC AWPS.
ISAC Reply 3AEE added to MRC STYL.
ISAC Reply 3AET added to MRC STYL.
ISAC Reply 3AEU added to MRC STYL.
ISAC Reply 3AEV added to MRC STYL.
ISAC Reply 3HOU added to MRC STYL.
ISAC Reply 1A deleted from MRC STYL.
ISAC Reply 1B deleted from MRC STYL.
ISAC Reply 1Y deleted from MRC STYL.
ISAC Reply 3AEE added to MRC ACSV.
ISAC Reply 3AET added to MRC ACSV.
ISAC Reply 3AEU added to MRC ACSV.
ISAC Reply 3AEV added to MRC ACSV.
ISAC Reply 3HOU added to MRC ACSV.
ISAC Reply 1A deleted from MRC ACSV.
ISAC Reply 1B deleted from MRC ACSV.
ISAC Reply 1Y deleted from MRC ACSV.
ISAC Reply 3AEE added to MRC AJES.
ISAC Reply 3AET added to MRC AJES.
ISAC Reply 3HOU added to MRC AJES.
ISAC Reply 1A deleted from MRC AJES.
ISAC Reply 1B deleted from MRC AJES.
ISAC Reply 1Y deleted from MRC AJES.
ISAC Reply 3AEE added to MRC ABKV.
ISAC Reply 3AET added to MRC ABKV.
ISAC Reply 3AEV added to MRC ABKV.
ISAC Reply 3HOU added to MRC ABKV.
ISAC Reply 1A deleted from MRC ABKV.
ISAC Reply 1B deleted from MRC ABKV.
ISAC Reply 1Y deleted from MRC ABKV.
ISAC Reply 3AEE added to MRC ACSU.
ISAC Reply 3AET added to MRC ACSU.
ISAC Reply 3AEU added to MRC ACSU.
ISAC Reply 3AEV added to MRC ACSU.
ISAC Reply 3HOU added to MRC ACSU.
ISAC Reply 1A deleted from MRC ACSU.
ISAC Reply 1B deleted from MRC ACSU.
ISAC Reply 1Y deleted from MRC ACSU.
ISAC Reply 1A deleted from MRC AWMF.
ISAC Reply 1B deleted from MRC AWMF.
ISAC Reply 1Y deleted from MRC AWMF.
ISAC Reply 3AEE added to MRC ABUJ.
ISAC Reply 3AET added to MRC ABUJ.
ISAC Reply 3AEU added to MRC ABUJ.
ISAC Reply 3AEV added to MRC ABUJ.
ISAC Reply 3HOU added to MRC ABUJ.
ISAC Reply 1A deleted from MRC ABUJ.
ISAC Reply 1B deleted from MRC ABUJ.
ISAC Reply 1Y deleted from MRC ABUJ.
ISAC Reply 3AEE added to MRC AWMG.
ISAC Reply 3AET added to MRC AWMG.
ISAC Reply 3AEU added to MRC AWMG.
ISAC Reply 3AEV added to MRC AWMG.
ISAC Reply 3HOU added to MRC AWMG.
ISAC Reply 1A deleted from MRC AWMG.
ISAC Reply 1B deleted from MRC AWMG.
ISAC Reply 1Y deleted from MRC AWMG.
ISAC Reply 3AEE added to MRC AWMH.
ISAC Reply 3AET added to MRC AWMH.
ISAC Reply 3AEV added to MRC AWMH.
ISAC Reply 3HOU added to MRC AWMH.
ISAC Reply 1A deleted from MRC AWMH.
ISAC Reply 1B deleted from MRC AWMH.
ISAC Reply 1Y deleted from MRC AWMH.
ISAC Reply 3AEE added to MRC AJYP.
ISAC Reply 3AET added to MRC AJYP.
ISAC Reply 3AEU added to MRC AJYP.
ISAC Reply 3AEV added to MRC AJYP.
ISAC Reply 3HOU added to MRC AJYP.
ISAC Reply 1A deleted from MRC AJYP.
ISAC Reply 1B deleted from MRC AJYP.
ISAC Reply 1Y deleted from MRC AJYP.
ISAC Reply 3AEE added to MRC AAJD.
ISAC Reply 3AET added to MRC AAJD.
ISAC Reply 3AEU added to MRC AAJD.
ISAC Reply 3AEV added to MRC AAJD.
ISAC Reply 3HOU added to MRC AAJD.
ISAC Reply 1A deleted from MRC AAJD.
ISAC Reply 1B deleted from MRC AAJD.
ISAC Reply 1Y deleted from MRC AAJD.
ISAC Reply 3AEE added to MRC AAJF.
ISAC Reply 3AET added to MRC AAJF.
ISAC Reply 3AEU added to MRC AAJF.
ISAC Reply 3AEV added to MRC AAJF.
ISAC Reply 3HOU added to MRC AAJF.
ISAC Reply 1A deleted from MRC AAJF.
ISAC Reply 1B deleted from MRC AAJF.
ISAC Reply 1Y deleted from MRC AAJF.
ISAC Reply 3AEE added to MRC AHSJ.
ISAC Reply 3AET added to MRC AHSJ.
ISAC Reply 3AEU added to MRC AHSJ.
ISAC Reply 3AEV added to MRC AHSJ.
ISAC Reply 3HOU added to MRC AHSJ.
ISAC Reply 1A deleted from MRC AHSJ.
ISAC Reply 1B deleted from MRC AHSJ.
ISAC Reply 1Y deleted from MRC AHSJ.
ISAC Reply 3AEE added to MRC AWMJ.
ISAC Reply 3AET added to MRC AWMJ.
ISAC Reply 3AEU added to MRC AWMJ.
ISAC Reply 3AEV added to MRC AWMJ.
ISAC Reply 3HOU added to MRC AWMJ.
ISAC Reply 1A deleted from MRC AWMJ.
ISAC Reply 1B deleted from MRC AWMJ.
ISAC Reply 1Y deleted from MRC AWMJ.
ISAC Reply 1A deleted from MRC ADML.
ISAC Reply 1B deleted from MRC ADML.
ISAC Reply 1Y deleted from MRC ADML.
ISAC Reply 3AEE added to MRC AWMK.
ISAC Reply 3AEV added to MRC AWMK.
ISAC Reply 3HOU added to MRC AWMK.
ISAC Reply 1A deleted from MRC AWMK.
ISAC Reply 1A deleted from MRC AWMK.
ISAC Reply 1A deleted from MRC AWMK.
ISAC Reply 1B deleted from MRC AWMK.
ISAC Reply 1B deleted from MRC AWMK.
ISAC Reply 1B deleted from MRC AWMK.
ISAC Reply 1Y deleted from MRC AWMK.
ISAC Reply 1Y deleted from MRC AWMK.
ISAC Reply 1Y deleted from MRC AWMK.
MRC AAJE has been deleted
MRC AJFZ has been deleted
MRC ABKU has been deleted
MRC ADMM has been deleted
MRC ADMN has been deleted
MRC ADME has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED36434*)
AZSZ*DDESICCANT TYPE
INDICATES THE TYPE OF DRYING AGENT USED IN THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AZSZ3AEEDAAN*;AZSZ3AEEDAAN$DABL*;AZSZ3AEEDAAN$$DABL*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AL79) | Reply |
| AAM | ALKALI METAL |
| AAN | ALUMINA, ACTIVATED |
| AAP | ANHYDROUS CALCIUM SULPHATE |
| A | ANY ACCEPTABLE |
| AAQ | CALCIUM CHLORIDE |
| AAR | CALCIUM SULPHATE |
| AAS | CARBON, ACTIVATED |
| ABL | CHARCOAL, ACTIVATED |
| AAY | MOLDED CHARCOAL |
| AAT | MOLECULAR SIEVE |
| AAW | SILICA GEL |
| AAX | SODA LIME |
IF STYLE/REPLY CODE(s) AEM WERE ENTERED FOR MRC APQB, YOU MUST ANSWER MRC (AHUH and AFSE and ASFG)
APQBDUNIT TYPE
INDICATES THE TYPE OF UNIT.
Enter the applicable reply code from the table below
(APQBDAEL)
| Table 1 |
| Reply Code (AK95) | Reply |
| A | ANY ACCEPTABLE |
| CEE | CARTRIDGE |
| AEK | NONREFILLABLE |
| AEL | REFILLABLE BULK |
| AEM | REFILLABLE CARTRIDGE |
AHUH*ACARTRIDGE QUANTITY
THE NUMBER OF CARTRIDGES OF WHICH THE GROUPING IS COMPOSED.
Enter the numeric reply with a minimum of one digit.
(AHUHA10*)
AFSE*JCARTRIDGE OVERALL DIAMETER
THE OVERALL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CARTRIDGE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFSEJAA2.0*;AFSEJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ASFG*JCARTRIDGE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF A CARTRIDGE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASFGJAA2.0*;ASFGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) BH WERE ENTERED FOR MRC SHPE, YOU MUST ANSWER MRC (AZZM)
SHPEDSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDBH)
| Table 1 |
| Reply Code (AD07) | Reply |
| BH | ANGULAR |
| BK | STRAIGHT |
AZZM*JDISTANCE FROM OUTLET CENTERLINE TO INLET FACE
THE DISTANCE FROM THE CENTERLINE OF THE OUTLET TO THE FACE OF THE INLET.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZZMJAC2.0*;AZZMJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZZNJDESICCANT CAPACITY
THE AMOUNT OF LIQUID,GRANULES,AND THE LIKE,THE ITEM WILL HOLD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZZNJCA2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| CP | CUBIC INCHES |
| CA | CUBIC MILLIMETERS |
CWMDJCOMPRESSOR POWER RATING
THE VALUE OF THE ELECTRICAL INPUT POWER FOR WHICH THE COMPRESSOR IS RATED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWMDJL2.0*)
| Table 1 |
| Reply Code (AC33) | Reply |
| H | HORSEPOWER |
| L | KILOWATTS |
ABHPJOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AMRQ*JSHELL LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SHELL,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMRQJAB2.0*;AMRQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AZZT*JSHELL DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE SHELL,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AZZTJAB2.0*;AZZTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AWPRHEND CONNECTION TYPE AND LOCATION
INDICATES THE TYPE OF END CONNECTION AND ITS LOCATION ON THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below.
(AWPRHAAAHH*)
| Table 1 |
| Reply Code (AB76) | Reply |
| AN | BUTT WELD |
| AM | PLAIN FACE FLANGE |
| AL | RAISED FACE FLANGE |
| AK | RECESSED FLANGE |
| AW | THREADED EXTERNAL BOSS |
| AU | THREADED EXTERNAL GAS CYLINDER |
| AR | THREADED EXTERNAL HOSE |
| AG | THREADED EXTERNAL PIPE |
| AC | THREADED EXTERNAL TUBE |
| AV | THREADED INTERNAL BOSS |
| AT | THREADED INTERNAL GAS CYLINDER |
| AP | THREADED INTERNAL HOSE |
| AE | THREADED INTERNAL PIPE |
| AA | THREADED INTERNAL TUBE |
| AS | UNTHREADED EXTERNAL HOSE |
| AJ | UNTHREADED EXTERNAL PIPE |
| AD | UNTHREADED EXTERNAL TUBE |
| AQ | UNTHREADED INTERNAL HOSE |
| AF | UNTHREADED INTERNAL PIPE |
| AB | UNTHREADED INTERNAL TUBE |
| Table 2 |
| Reply Code (AJ91) | Reply |
| AHH | BOTH ENDS |
| AHJ | FIRST END |
| ALP | SECOND END |
AWPS*DCONNECTION SPECIAL DESIGN
THE SPECIAL DESIGN OF THE CONNECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWPS3AEVDBP*;AWPS3AEVDBP$DCD*;AWPS3AEVDBP$$DCD*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| CD | BULKHEAD |
| BP | UNION |
STYL*LSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(STYL3AETL52*;STYL3AETL52$L7*;STYL3AETL52$$L7*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAC1556 | 1 | DOUBLE COMPRESSION |
| AAC1565 | 10 | SWIVEL NUT, GASKET SEAL |
| AAC1566 | 11 | SWIVEL NUT, FLARED |
| AAC1567 | 12 | SWIVEL NUT WITH COMPRESSION SLEEVE |
| AAC1568 | 13 | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE |
| AAC1569 | 14 | GASKET SEAL |
| AAC1570 | 15 | SWIVEL NUT, GASKET SEAL |
| AAC1571 | 16 | SWIVEL NUT, GAS |
| AAC1572 | 17 | SWIVEL NUT, FLARELESS CAP |
| AAC1573 | 18 | SWIVEL NUT, COMPRESSION |
| AAC1574 | 19 | SWIVEL NUT, FLARELESS |
| AAC1557 | 2 | INVERTED FLARE |
| AAC1575 | 20 | HIGH PRESSURE FLARE |
| AAC1576 | 21 | UNTHREADED INTERNAL |
| AAC1577 | 22 | UNTHREADED INTERNAL |
| AAC1578 | 23 | STREAMLINED WITH TWO BRAZING RINGS |
| AAC1579 | 24 | UNTHREADED INTERNAL |
| AAC1580 | 25 | UNTHREADED INTERNAL |
| AAC1581 | 26 | UNTHREADED INTERNAL |
| AAC1582 | 27 | UNTHREADED INTERNAL |
| AAC1583 | 28 | UNTHREADED INTERNAL |
| AAC1584 | 29 | UNTHREADED INTERNAL |
| AAC1558 | 3 | GASKET SEAL |
| AAC1585 | 30 | UNTHREADED INTERNAL |
| AAC1586 | 31 | UNTHREADED INTERNAL |
| AAC1587 | 32 | UNTHREADED INTERNAL |
| AAC1588 | 33 | UNTHREADED INTERNAL |
| AAC1589 | 34 | UNTHREADED INTERNAL |
| AAC1590 | 35 | UNTHREADED INTERNAL |
| AAC1591 | 36 | INVERTED FLARE |
| AAC1592 | 37 | PLAIN |
| AAC1593 | 38 | COMPRESSION |
| AAC1594 | 39 | HOSE GRIPPING NIPPLE |
| AAC1559 | 4 | PLAIN |
| AAC1595 | 40 | HOSE GRIPPING |
| AAC1596 | 41 | HOSE OR PLASTIC TUBING GRIPPING |
| AAC1597 | 42 | FLARED |
| AAC1598 | 43 | SOLID PLUG |
| AAC1599 | 44 | EXTERNAL SEAT FOR GASKET SEAL |
| AAC1600 | 45 | FLARELESS |
| AAC1601 | 46 | SWIVEL NUT INVERTED FLARE |
| AAC1602 | 47 | SWIVEL, PLAIN |
| AAC1603 | 48 | SWIVEL NUT, DOUBLE COMPRESSION |
| AAC1604 | 49 | GASKET SEAL |
| AAC1605 | 4A | OPTIONAL END |
| AAC1560 | 5 | SWIVEL NUT, FLARE |
| AAC1606 | 50 | SWIVEL NUT, FLARED |
| AAC1607 | 51 | DOUBLE THREADED SECTION BOSS FITTING GASKET WITH LOCKNUT SEALING |
| AAC1608 | 52 | GASKET SEAL COMPRESSION |
| AAC1609 | 53 | SWIVEL NUT, HOSE GRIPPING NIPPLE |
| AAC1610 | 54 | SWIVEL NUT WITH INTERNALLY THREADED SLEEVE AND FLARE TUBE |
| AAC1611 | 55 | UNTHREADED EXTERNAL |
| AAC1612 | 56 | BARBED ON SERRATED END |
| AAC1613 | 57 | UNTHREADED EXTERNAL |
| AAC1614 | 58 | UNTHREADED EXTERNAL |
| AAC1615 | 59 | UNTHREADED EXTERNAL |
| AAC1561 | 6 | SWIVEL NUT, GASKET SEAL |
| AAC1616 | 60 | UNTHREADED EXTERNAL |
| AAC1617 | 61 | UNTHREADED EXTERNAL |
| AAC1618 | 62 | UNTHREADED EXTERNAL |
| AAC1619 | 63 | THREADED |
| AAC1620 | 64 | THREADED |
| AAC1621 | 65 | THREADED |
| AAC1622 | 66 | THREADED |
| AAC1623 | 67 | THREADED |
| AAC1624 | 68 | RECESSED |
| AAC1625 | 69 | RAISED |
| AAC1562 | 7 | FLARE |
| AAC1626 | 70 | PLAIN |
| AAC1627 | 71 | RECESSED |
| AAC1628 | 72 | RAISED |
| AAC1629 | 73 | RECESSED |
| AAC1630 | 74 | RAISED |
| AAC1631 | 75 | PLAIN |
| AAC1632 | 76 | PLAIN |
| AAC1633 | 77 | PLAIN |
| AAC1634 | 78 | BUTT WELD |
| AAC1635 | 79 | BUTT WELD |
| AAC1563 | 8 | SWIVEL NUT, INVERTED FLARE |
| AAC1636 | 80 | BUTT WELD |
| AAC1637 | 81 | MISCELLANEOUS |
| AAC1638 | 82 | MISCELLANEOUS |
| AAC1639 | 83 | MISCELLANEOUS |
| AAC1640 | 84 | MISCELLANEOUS |
| AAC1564 | 9 | DRAINAGE |
ACSV*JTUBE OUTSIDE DIAMETER FOR WHICH DESIGNED
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE TUBE FOR WHICH DESIGNED,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACSV3AEUJAC2.0*;ACSV3AEUJAC2.0$JAC2.0*;ACSV3AEUJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJES*JHOSE OUTSIDE DIAMETER FOR WHICH DESIGNED
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE HOSE FOR WHICH THE ITEM IS DESIGNED,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJES3AEEJAA2.0*;AJES3AEEJAA2.0$JAA2.0*;AJES3AEEJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKV3AEEJAB2.0*;ABKV3AEEJAB2.0$JAB2.0*;ABKV3AEEJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACSU*JNOMINAL PIPE SIZE FOR WHICH DESIGNED
THE INDUSTRIAL DESIGNATION OR TERM USED TO DEFINE THE NOMINAL DIAMETER OF PIPE FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACSU3AEUJA2.0*;ACSU3AEUJA2.0$JA2.0*;ACSU3AEUJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AWMF*JINSIDE DIAMETER HOSE ACCOMMODATED
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATION FOR A HOSE,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWMFJAB2.0*;AWMFJAB2.0$JAB2.0*;AWMFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABUJ*ATHREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER SPECIFIC MEASUREMENT SCALE.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(ABUJ3AEUAP1)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AWMG*AEXTERNAL THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF AN EXTERNALLY THREADED ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AWMG3AEEAF2)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AWMH*AINTERNAL THREAD SIZE
DESIGNATES THE THREAD DIAMETER AND NUMBER OF THREADS PER MEASUREMENT SCALE OF AN INTERNALLY THREADED ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AWMH3AEEAA3)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AJYP*DSCREW THREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF SCREW THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AJYP3AETDTT*;AJYP3AETDTT$DJC*;AJYP3AETDTT$$DJC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| AC | ACME C |
| AG | ACME G |
| AN | ANPT |
| BA | BA |
| BF | BRITISH STANDARD FINE (BSF) |
| BW | BRITISH STANDARD WHITWORTH (BSW) |
| BE | BSP.F EXT |
| BT | BSP.F INT |
| BL | BSP.PL EXT |
| BN | BSP.PL INT |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| TT | BUTTRESS |
| CT | CUTTING |
| DR | DRIVE |
| FM | FORMING |
| FP | F-PTF |
| SM | ISO M |
| SS | ISO S |
| NG | NGO |
| GS | NGS |
| GT | NGT |
| NH | NH |
| SP | NPS |
| SC | NPSC |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| SL | NPSL |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| TR | NPTR |
| TS | NPTS |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PE | PTF-SPL EXTRA SHORT |
| PF | PTF-SPL SHORT |
| SW | SAE |
| SG | SGT |
| SQ | SQUARE |
| SA | STUB ACME |
| UN | UN |
| NE | UNEF |
| NF | UNF |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| NJ | UNIFIED NATIONAL JOINT (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| NM | UNM |
| NS | UNS |
| WW | WHITWORTH |
| WD | WOOD |
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(AAJD3AETAJ3)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AAJF3AETDL*;AAJF3AETDL$DR*;AAJF3AETDL$$DR*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA38) | Reply |
| L | LEFT-HAND |
| R | RIGHT-HAND |
CQRB*JSEAT ANGLE
THE ANGLE OF THE END SURFACE UPON WHICH THE MATED SURFACE SEATS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQRBJR2.0*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
AHSJ*JLEG LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE LEG,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHSJ3AEVJAA2.0*;AHSJ3AEVJAA2.0$JAA2.0*;AHSJ3AEVJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AWMJ*JRESTRICTION PASSAGE INSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE RESTRICTION PASSAGE,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWMJ3AEEJAC2.0*;AWMJ3AEEJAC2.0$JAC2.0*;AWMJ3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADML*AMOUNTING FLANGE BOLT HOLE QUANTITY
THE NUMBER OF BOLT HOLES IN THE MOUNTING FLANGE.
Enter the numeric reply with a minimum of one digit.
(ADMLA10*)
AWMK*DMOUNTING FLANGE SHAPE
THE PHYSICAL CONFIGURATION OF THE MOUNTING FLANGE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWMK3AEVDBT*;AWMK3AEVDBT$DTR*;AWMK3AEVDBT$$DTR*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEV | BOTH ENDS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD07) | Reply |
| BT | OVAL |
| RT | RECTANGULAR |
| RD | ROUND |
| SQ | SQUARE |
| TR | TRIANGULAR |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAKY)
| Table 1 |
| Reply Code (AN47) | Reply |
| AKY | INTEGRAL STRAINER |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
AWJN*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING MATERIAL. PLEASE USE MRC CTJS IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWJNJBA2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| BA | GRAMS |
| AJ | KILOGRAMS |
| AS | POUNDS |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCC2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CN | CUBIC INCHES |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDALB000*;MATT3AEEDALB000$DCUB000*;MATT3AEEDALB000$$DCUB000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BBP | SHELL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| MGA000 | MAGNESIUM |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDPNF000*;SFTT3AEEDPNF000$DCDA000*;SFTT3AEEDPNF000$$DCDA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BBP | SHELL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMB000 | CHROMATE ZINC |
| ENA000 | ENAMEL |
| LQA000 | LACQUER |
| LQG000 | LACQUER FLAT (USE LQA000) AND (MRC AGYE) |
| PNA000 | PAINT |
| PNF000 | PAINT VINYL ALKYD |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BBP | SHELL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information