A receptacle or structure of sturdy construction and of various shapes, the top of which may be open or closed, used for storage of bulk liquids such as gasoline, oil or water. The tank may be equipped with pipe fittings. Excludes:tanks fabricated for use as an integral part of another system and trailer or truck mounted tanks designed for transporting liquids. See also TANK (1), ASPHALT STORAGE and TANK, HOT WATER STORAGE.
ISAC Reply 3AEE added to MRC CCLW.
ISAC Reply 3HJE added to MRC CCLW.
ISAC Reply 3HJF added to MRC CCLW.
ISAC Reply 3HJG added to MRC CCLW.
ISAC Reply 3HJH added to MRC CCLW.
ISAC Reply 3HJI added to MRC CCLW.
ISAC Reply 3HJJ added to MRC CCLW.
ISAC Reply 3HJK added to MRC CCLW.
ISAC Reply 3HJL added to MRC CCLW.
ISAC Reply 3HJM added to MRC CCLW.
ISAC Reply 3HJN added to MRC CCLW.
ISAC Reply 3HJO added to MRC CCLW.
ISAC Reply 3HJP added to MRC CCLW.
ISAC Reply 3HOU added to MRC CCLW.
ISAC Reply 1A deleted from MRC CCLW.
ISAC Reply 1B deleted from MRC CCLW.
ISAC Reply 1C deleted from MRC CCLW.
ISAC Reply 1D deleted from MRC CCLW.
ISAC Reply 1E deleted from MRC CCLW.
ISAC Reply 1F deleted from MRC CCLW.
ISAC Reply 1G deleted from MRC CCLW.
ISAC Reply 1H deleted from MRC CCLW.
ISAC Reply 1J deleted from MRC CCLW.
ISAC Reply 1K deleted from MRC CCLW.
ISAC Reply 1L deleted from MRC CCLW.
ISAC Reply 1M deleted from MRC CCLW.
ISAC Reply 1N deleted from MRC CCLW.
ISAC Reply 1P deleted from MRC CCLW.
ISAC Reply 1Q deleted from MRC CCLW.
ISAC Reply 1R deleted from MRC CCLW.
ISAC Reply 1S deleted from MRC CCLW.
ISAC Reply 1T deleted from MRC CCLW.
ISAC Reply 1U deleted from MRC CCLW.
ISAC Reply 1V deleted from MRC CCLW.
ISAC Reply 1Y deleted from MRC CCLW.
ISAC Reply 1Z deleted from MRC CCLW.
ISAC Reply 3AEE added to MRC CCLY.
ISAC Reply 3HJE added to MRC CCLY.
ISAC Reply 3HJF added to MRC CCLY.
ISAC Reply 3HJG added to MRC CCLY.
ISAC Reply 3HJH added to MRC CCLY.
ISAC Reply 3HJI added to MRC CCLY.
ISAC Reply 3HJJ added to MRC CCLY.
ISAC Reply 3HJK added to MRC CCLY.
ISAC Reply 3HJL added to MRC CCLY.
ISAC Reply 3HJM added to MRC CCLY.
ISAC Reply 3HJN added to MRC CCLY.
ISAC Reply 3HJO added to MRC CCLY.
ISAC Reply 3HJP added to MRC CCLY.
ISAC Reply 3HOU added to MRC CCLY.
ISAC Reply 1A deleted from MRC CCLY.
ISAC Reply 1B deleted from MRC CCLY.
ISAC Reply 1C deleted from MRC CCLY.
ISAC Reply 1D deleted from MRC CCLY.
ISAC Reply 1E deleted from MRC CCLY.
ISAC Reply 1F deleted from MRC CCLY.
ISAC Reply 1G deleted from MRC CCLY.
ISAC Reply 1H deleted from MRC CCLY.
ISAC Reply 1J deleted from MRC CCLY.
ISAC Reply 1K deleted from MRC CCLY.
ISAC Reply 1L deleted from MRC CCLY.
ISAC Reply 1M deleted from MRC CCLY.
ISAC Reply 1N deleted from MRC CCLY.
ISAC Reply 1P deleted from MRC CCLY.
ISAC Reply 1Q deleted from MRC CCLY.
ISAC Reply 1R deleted from MRC CCLY.
ISAC Reply 1S deleted from MRC CCLY.
ISAC Reply 1T deleted from MRC CCLY.
ISAC Reply 1U deleted from MRC CCLY.
ISAC Reply 1V deleted from MRC CCLY.
ISAC Reply 1Y deleted from MRC CCLY.
ISAC Reply 1Z deleted from MRC CCLY.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3AUW added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 2BF deleted from MRC SFTT.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED36423*)
IF STYLE/REPLY CODE(s) DL WERE ENTERED FOR MRC AMQY, YOU MUST ANSWER MRC (CBPT and AHEF and CBPX and MATT)
IF STYLE/REPLY CODE(s) DM WERE ENTERED FOR MRC AMQY, YOU MUST ANSWER MRC (CBPZ and BZKX and CBQB and MATT)
AMQYDINSTALLATION DESIGN
THE INSTALLATION FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(AMQYDDL*;AMQYDDM$DDL*)
| Table 1 |
| Reply Code (AJ17) | Reply |
| DL | HORIZONTAL |
| DM | VERTICAL |
AYNYDINSTALLATION LOCATION
INDICATES THE LOCATION FOR WHICH THE ITEM IS DESIGNED TO BE INSTALLED.
Enter the applicable reply code from the table below
(AYNYDCLS*;AYNYDCLR$DCLR*)
| Table 1 |
| Reply Code (AJ91) | Reply |
| CLR | ABOVE GROUND |
| CLS | BELOW GROUND |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC AQFN, YOU MUST ANSWER MRC (CBQD and AAGN)
AQFNDMOUNTING BRACKET
AN INDICATION OF WHETHER OR NOT A MOUNTING BRACKET IS PROVIDED.
Enter the applicable reply code from the table below
(AQFNDB*;AQFNDC$DB*)
| Table 1 |
| Reply Code (AB22) | Reply |
| C | NOT PROVIDED |
| B | PROVIDED |
BSSMJTANK CAPACITY
INDICATES THE CAPACITY OF THE TANK.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BSSMJCC2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| FK | GALLON, IMPERIAL MEASURE |
| FJ | GALLON, US MEASURE |
| CC | LITERS |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC AYNB, YOU MUST ANSWER MRC (CCLR and CCLS and CCLT)
IF STYLE/REPLY CODE(s) C WERE ENTERED FOR MRC AYNB, YOU MUST ANSWER MRC (CCLW and CCLX and CCLY and CCLZ)
AYNBDFITTING
AN INDICATION OF WHETHER OR NOT A FITTING(S) IS INCLUDED.
Enter the applicable reply code from the table below
(AYNBDC*;AYNBDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
ALPMDASSEMBLY FORM
THE FORM OF ASSEMBLY IN WHICH THE ITEM IS SUPPLIED.
Enter the applicable reply code from the table below
(ALPMDAD*;ALPMDAF$DAD*)
| Table 1 |
| Reply Code (AE33) | Reply |
| AD | KNOCKED-DOWN |
| AF | SET-UP |
BXHJDLIQUID FOR WHICH DESIGNED
THE LIQUID FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable reply code from the table below
(BXHJDAAAP*;BXHJDAAAD$DAAD*;BXHJDAAAD$$DAAD*)
| Table 1 |
| Reply Code (AB75) | Reply |
| A | ANY ACCEPTABLE |
| AAAH | ASPHALT |
| AMC | DEMINERALIZED WATER |
| AMQ | DETERGENT |
| AAC | FRESH WATER |
| AAAL | FUEL OIL |
| AAAD | GASOLINE |
| ADA | GASOLINE |
| AEL | HYDRAULIC FLUID |
| AMR | INK |
| AAAM | LIQUID PETROLEUM PRODUCT |
| AAAN | NAVAL (HYDROGEN PEROXIDE) |
| AAAP | NITROGEN TETROXIDE |
| AAAQ | NONPOTABLE WATER |
| AAAR | NONSPECIFIC |
| AAAS | OIL |
| AAD | OIL |
| AAAJ | OIL, DIESEL |
| AGR | PETROLEUM BASE FLUID |
| AAAT | PETROLEUM PRODUCT |
| AAAX | TRANSFORMER OIL |
| AAAY | UNSYMETRICAL DIMETHYLHYDRAZINE |
| AAAG | WATER |
| AAAZ | WATER, DEMINERALIZED |
| AAAK | WATER, DISTILLED |
| AAAW | WATER, POTABLE |
IF STYLE/REPLY CODE(s) AS WERE ENTERED FOR MRC AFPN, YOU MUST ANSWER MRC (CBPQ)
IF STYLE/REPLY CODE(s) AK WERE ENTERED FOR MRC AFPN, YOU MUST ANSWER MRC (MATT)
AFPNDASSEMBLY METHOD
THE MEANS BY WHICH THE BODY PARTS ARE DESIGNED TO BE FASTENED TOGETHER.
Enter the applicable reply code from the table below
(AFPNDAS*;AFPNDBK$DAK*)
| Table 1 |
| Reply Code (AB47) | Reply |
| AK | BOLTED |
| FS | MOLDED |
| BK | RIVETED |
| AS | WELDED |
CBPQ*DWELD TYPE
INDICATES THE TYPE OF WELD PROVIDED.
Enter the applicable reply code from the table below
(CBPQDBBR*;CBPQDABK$DABK*)
| Table 1 |
| Reply Code (AD07) | Reply |
| ABK | BUTT |
| BBR | LAP |
IF STYLE/REPLY CODE(s) ADB OR AEL WERE ENTERED FOR MRC SHPE, YOU MUST ANSWER MRC (ADAV and ABKW) or (ADAV and ABHP)
IF STYLE/REPLY CODE(s) AND WERE ENTERED FOR MRC SHPE, YOU MUST ANSWER MRC (ABKW and ABMK and ABHP)
SHPE*DSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDALC*;SHPEDAXN$DBCM*)
| Table 1 |
| Reply Code (AD07) | Reply |
| Z | ANY ACCEPTABLE |
| AAL | ARCHED |
| ACA | CONCAVE |
| ACD | CONICAL |
| ACK | CONVEX |
| ADB | CYLINDRICAL |
| BCK | DODECAGON |
| AEL | ELLIPTICAL |
| BCL | EQUILATERAL TRIANGULAR |
| AFC | FLAT |
| AHH | HEXAGON |
| AJG | IRREGULAR |
| BCM | IRREGULAR HEXAGON |
| AKT | OCTAGONAL |
| ALC | OVAL |
| AMP | POLYGON |
| BCN | POLYHEDRON |
| AND | RECTANGULAR |
| APL | ROUND |
| ASL | SQUARE |
| ATG | STRAIGHT |
| BCP | TETRAPOD |
| AXN | TRAPEZOIDAL |
| AXP | TRIANGULAR |
| AYW | WEDGE |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJFA2.0*;ADAVJFA2.0$$JFA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJFB2.0*;ABKWJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJFB2.0*;ABMKJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJFB2.0*;ABHPJFB2.0$$JFB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| M | METERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBPT*JEND MATERIAL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE END MATERIAL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBPTJAB2.0*;CBPTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHEF*DEND SHAPE
THE PHYSICAL CONFIGURATION OF THE END/S/ OF THE ITEM.
Enter the applicable reply code from the table below
(AHEFDAKT*;AHEFDAMP$DACA*)
| Table 1 |
| Reply Code (AD07) | Reply |
| A | ANY ACCEPTABLE |
| AAL | ARCHED |
| ACA | CONCAVE |
| ACD | CONICAL |
| ACK | CONVEX |
| ADB | CYLINDRICAL |
| BCK | DODECAGON |
| AEL | ELLIPTICAL |
| BCL | EQUILATERAL TRIANGULAR |
| AFC | FLAT |
| AHH | HEXAGON |
| AJG | IRREGULAR |
| BCM | IRREGULAR HEXAGON |
| AKT | OCTAGONAL |
| ALC | OVAL |
| AMP | POLYGON |
| BCN | POLYHEDRON |
| AND | RECTANGULAR |
| APL | ROUND |
| ASL | SQUARE |
| ATG | STRAIGHT |
| BCP | TETRAPOD |
| AXN | TRAPEZOIDAL |
| AXP | TRIANGULAR |
| AYW | WEDGE |
CBPX*DTWO COMPARTMENT FEATURE
AN INDICATION OF WHETHER OR NOT A TWO COMPARTMENT FEATURE IS INCLUDED.
Enter the applicable reply code from the table below
(CBPXDC*;CBPXDB$DB*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
CBPZ*JBOTTOM MATERIAL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE BOTTOM MATERIAL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBPZJAA2.0*;CBPZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BZKX*DBOTTOM SHAPE
THE PHYSICAL CONFIGURATION OF THE BOTTOM OF THE ITEM.
Enter the applicable reply code from the table below
(BZKXDAMP*;BZKXDBCM$DAAL*)
| Table 1 |
| Reply Code (AD07) | Reply |
| A | ANY ACCEPTABLE |
| AAL | ARCHED |
| ACA | CONCAVE |
| ACD | CONICAL |
| ACK | CONVEX |
| ADB | CYLINDRICAL |
| BCK | DODECAGON |
| AEL | ELLIPTICAL |
| BCL | EQUILATERAL TRIANGULAR |
| AFC | FLAT |
| AHH | HEXAGON |
| AJG | IRREGULAR |
| BCM | IRREGULAR HEXAGON |
| AKT | OCTAGONAL |
| ALC | OVAL |
| AMP | POLYGON |
| BCN | POLYHEDRON |
| AND | RECTANGULAR |
| APL | ROUND |
| ASL | SQUARE |
| ATG | STRAIGHT |
| BCP | TETRAPOD |
| AXN | TRAPEZOIDAL |
| AXP | TRIANGULAR |
| AYW | WEDGE |
IF STYLE/REPLY CODE(s) B WERE ENTERED FOR MRC CBQB, YOU MUST ANSWER MRC (CBQC and BBYK and MATT)
CBQB*DTOP
AN INDICATION OF WHETHER OR NOT A TOP IS INCLUDED.
Enter the applicable reply code from the table below
(CBQBDC*;CBQBDB$DC*)
| Table 1 |
| Reply Code (AA49) | Reply |
| B | INCLUDED |
| C | NOT INCLUDED |
CBQC*JTOP MATERIAL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE TOP MATERIAL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBQCJAB2.0*;CBQCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BBYK*DTOP SHAPE
THE PHYSICAL CONFIGURATION OF THE TOP OF THE ITEM.
Enter the applicable reply code from the table below
(BBYKDAMP*;BBYKDBCL$DAAL*)
| Table 1 |
| Reply Code (AD07) | Reply |
| A | ANY ACCEPTABLE |
| AAL | ARCHED |
| ACA | CONCAVE |
| ACD | CONICAL |
| ACK | CONVEX |
| ADB | CYLINDRICAL |
| BCK | DODECAGON |
| AEL | ELLIPTICAL |
| BCL | EQUILATERAL TRIANGULAR |
| AFC | FLAT |
| AHH | HEXAGON |
| AJG | IRREGULAR |
| BCM | IRREGULAR HEXAGON |
| AKT | OCTAGONAL |
| ALC | OVAL |
| AMP | POLYGON |
| BCN | POLYHEDRON |
| AND | RECTANGULAR |
| APL | ROUND |
| ASL | SQUARE |
| ATG | STRAIGHT |
| BCP | TETRAPOD |
| AXN | TRAPEZOIDAL |
| AXP | TRIANGULAR |
| AYW | WEDGE |
ALRD*DSUPPORT FACILITY
THE MEANS TO SUPPORT OR ACCOMMODATE THE ITEM.
Enter the applicable reply code from the table below
(ALRDDBW*;ALRDDAT$DAT*)
| Table 1 |
| Reply Code (AA78) | Reply |
| BW | LEG |
| AT | SKID |
CBQD*ABRACKET QUANTITY
THE NUMBER OF BRACKETS PROVIDED.
Enter the numeric reply with a minimum of one digit.
(CBQDA10*)
AAGN*JNOMINAL PIPE SIZE DESIGNATION
THE INDUSTRIAL DESIGNATION OR TERM USED TO DEFINE THE DIAMETER OF PIPE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAGNJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF YOU ANSWER MRC CBQF, YOU MUST ANSWER MRC (CBQG and CBQH and CBQJ)
CBQF*JMANHOLE TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF MANHOLES PROVIDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CBQFJBR2*;CBQFJBR2$$JBR3*;CBQFJBR2$JBR2*)
| Table 1 |
| Reply Code (AA78) | Reply |
| QN | DOME |
| BR | FLUSH |
CBQG*DMANHOLE MOUNTING METHOD
THE MEANS OF ATTACHING THE MANHOLE.
Enter the applicable reply code from the table below
(CBQGDAAC*;CBQGDAGC$DAAC*;CBQGDAGC$$DAAC*)
| Table 1 |
| Reply Code (AM39) | Reply |
| AAC | BOLT |
| AGC | HINGE |
CBQH*GMANHOLE LOCATION
INDICATES THE LOCATION OF THE MANHOLE.
Enter clear text.
(CBQHGCLEARTEXT)
IF STYLE/REPLY CODE(s) ALC OR AND WERE ENTERED FOR MRC CBQJ, YOU MUST ANSWER MRC (ADJU and ADJT)
IF STYLE/REPLY CODE(s) APL WERE ENTERED FOR MRC CBQJ, YOU MUST ANSWER MRC (AARX)
CBQJ*DMANHOLE SHAPE
THE PHYSICAL CONFIGURATION OF THE MANHOLE.
Enter the applicable reply code from the table below
(CBQJDBCM*;CBQJDATG$DA*;CBQJDATG$$DA*)
| Table 1 |
| Reply Code (AD07) | Reply |
| A | ANY ACCEPTABLE |
| AAL | ARCHED |
| ACA | CONCAVE |
| ACD | CONICAL |
| ACK | CONVEX |
| ADB | CYLINDRICAL |
| BCK | DODECAGON |
| AEL | ELLIPTICAL |
| BCL | EQUILATERAL TRIANGULAR |
| AFC | FLAT |
| AHH | HEXAGON |
| AJG | IRREGULAR |
| BCM | IRREGULAR HEXAGON |
| AKT | OCTAGONAL |
| ALC | OVAL |
| AMP | POLYGON |
| BCN | POLYHEDRON |
| AND | RECTANGULAR |
| APL | ROUND |
| ASL | SQUARE |
| ATG | STRAIGHT |
| BCP | TETRAPOD |
| AXN | TRAPEZOIDAL |
| AXP | TRIANGULAR |
| AYW | WEDGE |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAB2.0*;ADJUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAC2.0*;AARXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF YOU ANSWER MRC CBQK, YOU MUST ANSWER MRC (CBQL and CBQM)
CBQK*DCLEANOUT TYPE
INDICATES THE TYPE OF CLEANOUT PROVIDED ON THE ITEM.
Enter the applicable reply code from the table below
(CBQKDBLL*;CBQKDASF$DBLL*;CBQKDASF$$DBLL*)
| Table 1 |
| Reply Code (AK54) | Reply |
| ASF | EXTENDED |
| BLL | FLUSH |
CBQL*GCLEANOUT LOCATION
INDICATES THE LOCATION OF THE CLEANOUT.
Enter clear text.
(CBQLGCLEARTEXT)
IF STYLE/REPLY CODE(s) APL WERE ENTERED FOR MRC CBQM, YOU MUST NOT ANSWER MRC (CCLP and CCLQ)
CBQM*DCLEANOUT SHAPE
THE PHYSICAL CONFIGURATION OF THE CLEANOUT.
Enter the applicable reply code from the table below
(CBQMDAMP*;CBQMDA$DAFC*;CBQMDA$$DAFC*)
| Table 1 |
| Reply Code (AD07) | Reply |
| A | ANY ACCEPTABLE |
| AAL | ARCHED |
| ACA | CONCAVE |
| ACD | CONICAL |
| ACK | CONVEX |
| ADB | CYLINDRICAL |
| BCK | DODECAGON |
| AEL | ELLIPTICAL |
| BCL | EQUILATERAL TRIANGULAR |
| AFC | FLAT |
| AHH | HEXAGON |
| AJG | IRREGULAR |
| BCM | IRREGULAR HEXAGON |
| AKT | OCTAGONAL |
| ALC | OVAL |
| AMP | POLYGON |
| BCN | POLYHEDRON |
| AND | RECTANGULAR |
| APL | ROUND |
| ASL | SQUARE |
| ATG | STRAIGHT |
| BCP | TETRAPOD |
| AXN | TRAPEZOIDAL |
| AXP | TRIANGULAR |
| AYW | WEDGE |
CCLP*JCLEANOUT INSIDE HEIGHT
AN INSIDE MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE ITEM,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCLPJAB2.0*;CCLPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CCLQ*JCLEANOUT INSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A CLEANOUT,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCLQJAA2.0*;CCLQJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CCLR*JFITTING TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF FITTINGS PROVIDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CCLRJAFP2*;CCLRJAFP2$$JAFP3*;CCLRJAFP2$JAFP2*)
| Table 1 |
| Reply Code (AM35) | Reply |
| AFP | ADAPTER |
| AFQ | BOLTED FLANGE |
| AFR | BOSSES |
| AFS | BRASS CAP W/CHAIN |
| AFT | BRASS VALVE |
| AFW | CAP, FILL PIPE |
| AFX | CAP, TYPE 2, CLASS A |
| AFY | COUPLING |
| AFZ | COVER, CLEANOUT |
| AGA | COVER, MANHOLE |
| AGB | DISPENSING VALVE W/DUST CAP |
| AGC | DOUBLE MALE HOSE ADAPTER |
| AGD | ELBOW |
| AGE | ELBOW, STREET, TYPE 2 |
| AGF | END CAP |
| AHL | FAUCET W/STRAINER AND DUST CAP |
| AGG | NIPPLE |
| AGH | NIPPLE, TYPE 2 |
| AGJ | PIPE, TYPE 1, CLASS A |
| ABQ | PLUG |
| AGK | PLUG, CLEANOUT OPENING |
| AGL | PLUG, OUTLET |
| AGM | PLUG, VENT |
| AGN | QUICK DISCONNECT HOSE NIPPLE |
| AGP | SPARKPROOF COMBINATION FREE VENT AND THIEF HATCH |
| AGQ | STANDARD OUTLET PIPE |
| AGR | STANDARD PIPE |
| AGS | STANDARD SCREWED IPS FLANGE |
| AGT | SUITCASE CATCHES |
| AGW | THREADED BUSHING |
| AGX | THREADED FLANGE CONNECTION |
| AHJ | THREADED PIPE CAP W/CHAIN |
| AGY | VALVE |
| AHA | VALVE IRON BODY |
| AHK | VALVE, DRAIN |
| AGZ | VALVE, GLOBE, DRAIN |
| AHB | VENT VALVE |
| AFV | WELD STUD |
| AHC | WELDED BOSS W/PIPE PLUG |
| AHD | WELDED COUPLING |
| AHE | WELDED FLANGE |
| AHF | WELDED PIPE |
| AHG | WELDED PIPE BAND W/MALE FITTING |
CCLS*GFITTING SIZE
DESIGNATES THE SIZE OF THE FITTING(S) PROVIDED.
Enter clear text.
(CCLSGCLEARTEXT)
CCLT*GFITTING LOCATION
INDICATES THE LOCATION OF THE FITTING.
Enter clear text.
(CCLTGCLEARTEXT)
CCLW*AFITTING OPENING QUANTITY
THE NUMBER OF FITTING OPENINGS PROVIDED.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(CCLW3HJLA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HJE | FIRST OPENING |
| 3HJF | SECOND OPENING |
| 3HJG | THIRD OPENING |
| 3HJH | FOURTH OPENING |
| 3HJI | FIFTH OPENING |
| 3HJJ | SIXTH OPENING |
| 3HJK | SEVENTH OPENING |
| 3HJL | EIGHTH OPENING |
| 3HJM | NINTH OPENING |
| 3HJN | NINETEENTH OPENING |
| 3HJO | SINGLE OPENING |
| 3HJP | ALL OPENINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
CCLX*DFITTING OPENING THREAD PROVISION
AN INDICATION OF WHETHER THE FITTING OPENING IS THREADED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(CCLX1PDBQC)
| Table 1 |
| ISAC Field Indicator (0364) | Location |
| 1A | 1ST OPENING |
| 1B | 2ND OPENING |
| 1C | 3RD OPENING |
| 1D | 4TH OPENING |
| 1E | 5TH OPENING |
| 1F | 6TH OPENING |
| 1G | 7TH OPENING |
| 1H | 8TH OPENING |
| 1J | 9TH OPENING |
| 1K | 19TH OPENING |
| 1L | 10TH OPENING |
| 1M | 11TH OPENING |
| 1N | 12TH OPENING |
| 1P | 13TH OPENING |
| 1Q | 14TH OPENING |
| 1R | 15TH OPENING |
| 1S | 16TH OPENING |
| 1T | 17TH OPENING |
| 1U | 18TH OPENING |
| 1V | 20TH OPENING |
| 1Y | SINGLE OPENING |
| 1Z | ALL OPENINGS |
| Table 2 |
| Reply Code (AK54) | Reply |
| ADP | THREADED |
| BQC | UNTHREADED |
CCLY*JFITTING OPENING DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A FITTING,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCLY3HJJJAB2.0*;CCLY3HJJJAB2.0$JAB2.0*;CCLY3HJJJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3HJE | FIRST OPENING |
| 3HJF | SECOND OPENING |
| 3HJG | THIRD OPENING |
| 3HJH | FOURTH OPENING |
| 3HJI | FIFTH OPENING |
| 3HJJ | SIXTH OPENING |
| 3HJK | SEVENTH OPENING |
| 3HJL | EIGHTH OPENING |
| 3HJM | NINTH OPENING |
| 3HJN | NINETEENTH OPENING |
| 3HJO | SINGLE OPENING |
| 3HJP | ALL OPENINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CCLZ*GFITTING OPENING LOCATION
INDICATES THE LOCATION OF THE FITTING OPENING.
Enter clear text.
(CCLZGCLEARTEXT)
CCMB*DLADDER LOCATION
INDICATES THE LOCATION OF THE LADDER.
Enter the applicable reply code from the table below
(CCMBDDNX*;CCMBDDNQ$DDNQ*;CCMBDDNQ$$DDNQ*)
| Table 1 |
| Reply Code (AK54) | Reply |
| DNQ | EXTERIOR |
| DNX | INTERIOR |
AKYD*GACCESSORY COMPONENTS AND QUANTITY
THE NAME AND NUMBER OF PARTS SUPPLIED WITH THE ITEM WHICH MAY BE REQUIRED FOR APPLICATION.
Enter clear text.
(AKYDGCLEARTEXT)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CCNF*GAPPLICATION/FUNCTION
THE APPLICATION AND/OR FUNCTION FOR WHICH THE ITEM IS DESIGNED.
Enter clear text.
(CCNFGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAS3)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAT3)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AUWDENA000*;SFTT3AUWDENA000$DAAA014*;SFTT3AUWDENA000$$DAAA014*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AUW | OUTSIDE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ENA000 | ENAMEL |
| PNA000 | PAINT |
| AAA014 | POLISHED |
| ZNA000 | ZINC |
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCM2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CD | CUBIC DECIMETERS |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3ACRDALA000*;MATT3ACRDALA000$DRSA000*;MATT3ACRDALA000$$DRSA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABK | TOP |
| 3ACR | END |
| 3AEE | OVERALL |
| 3ALJ | BOTTOM |
| 3AYK | GASKET |
| 3BBP | SHELL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| CUB000 | COPPER ALLOY |
| FG0000 | FIBERGLASS |
| GSB000 | GLASS FIBER |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCAH00 | PLASTIC POLYURETHANE |
| PCBC00 | PLASTIC STYRENE |
| RSC000 | RESIN NATURAL |
| RSA000 | RESIN SYNTHETIC |
| RCE000 | RUBBER |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABK | TOP |
| 3ACR | END |
| 3AEE | OVERALL |
| 3ALJ | BOTTOM |
| 3AYK | GASKET |
| 3BBP | SHELL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information