A transformer which incorporates the primary and secondary functions into a single winding, which is common to both input and output circuits, and is designed to change the relationship of volts and amperes between the entire winding and its taps. Includes multiple winding transformers of like design and items in which a variation of the turns ratio or inductive ratio of inductive coupling is accomplished by connection to fixed terminals. Also, includes items having a provision for mechanically changing the turns ratio in progressive increments, by means of a shaft, voltage taps, ratio adjuster, or devices of similar design. Excludes:TRANSFORMER (1), POWER; TRANSFORMER (1), PULSE.
ISAC Reply 3AEE added to MRC CWJS.
ISAC Reply 3DVF added to MRC CWJS.
ISAC Reply 3DVI added to MRC CWJS.
ISAC Reply 3DVJ added to MRC CWJS.
ISAC Reply 3DVL added to MRC CWJS.
ISAC Reply 3DVO added to MRC CWJS.
ISAC Reply 3DVP added to MRC CWJS.
ISAC Reply 3DWG added to MRC CWJS.
ISAC Reply 3DWH added to MRC CWJS.
ISAC Reply 3DWI added to MRC CWJS.
ISAC Reply 3DWN added to MRC CWJS.
ISAC Reply 3DXC added to MRC CWJS.
ISAC Reply 3DXL added to MRC CWJS.
ISAC Reply 3DXM added to MRC CWJS.
ISAC Reply 3DZM added to MRC CWJS.
ISAC Reply 3DZN added to MRC CWJS.
ISAC Reply 3DZO added to MRC CWJS.
ISAC Reply 3DZP added to MRC CWJS.
ISAC Reply 3DZT added to MRC CWJS.
ISAC Reply 3DZU added to MRC CWJS.
ISAC Reply 3DZV added to MRC CWJS.
ISAC Reply 3DZW added to MRC CWJS.
ISAC Reply 3DZX added to MRC CWJS.
ISAC Reply 3EAA added to MRC CWJS.
ISAC Reply 3EAC added to MRC CWJS.
ISAC Reply 3EAE added to MRC CWJS.
ISAC Reply 3EAG added to MRC CWJS.
ISAC Reply 3EAI added to MRC CWJS.
ISAC Reply 3EAW added to MRC CWJS.
ISAC Reply 3EAX added to MRC CWJS.
ISAC Reply 3EAY added to MRC CWJS.
ISAC Reply 3EAZ added to MRC CWJS.
ISAC Reply 3EBA added to MRC CWJS.
ISAC Reply 3EBC added to MRC CWJS.
ISAC Reply 3EBD added to MRC CWJS.
ISAC Reply 3EBE added to MRC CWJS.
ISAC Reply 3EBF added to MRC CWJS.
ISAC Reply 3EBG added to MRC CWJS.
ISAC Reply 3EBH added to MRC CWJS.
ISAC Reply 3ECT added to MRC CWJS.
ISAC Reply 3ECU added to MRC CWJS.
ISAC Reply 3ECV added to MRC CWJS.
ISAC Reply 3ECW added to MRC CWJS.
ISAC Reply 3ECZ added to MRC CWJS.
ISAC Reply 3HOU added to MRC CWJS.
ISAC Reply 1A deleted from MRC CWJS.
ISAC Reply 1B deleted from MRC CWJS.
ISAC Reply 1C deleted from MRC CWJS.
ISAC Reply 1D deleted from MRC CWJS.
ISAC Reply 1E deleted from MRC CWJS.
ISAC Reply 1F deleted from MRC CWJS.
ISAC Reply 1G deleted from MRC CWJS.
ISAC Reply 1H deleted from MRC CWJS.
ISAC Reply 1X deleted from MRC CWJS.
ISAC Reply 1Z deleted from MRC CWJS.
ISAC Reply 1A deleted from MRC CWJS.
ISAC Reply 1B deleted from MRC CWJS.
ISAC Reply 1C deleted from MRC CWJS.
ISAC Reply 1D deleted from MRC CWJS.
ISAC Reply 1E deleted from MRC CWJS.
ISAC Reply 1F deleted from MRC CWJS.
ISAC Reply 1X deleted from MRC CWJS.
ISAC Reply 1Z deleted from MRC CWJS.
ISAC Reply 1A deleted from MRC CWJS.
ISAC Reply 1B deleted from MRC CWJS.
ISAC Reply 1C deleted from MRC CWJS.
ISAC Reply 1D deleted from MRC CWJS.
ISAC Reply 1E deleted from MRC CWJS.
ISAC Reply 1F deleted from MRC CWJS.
ISAC Reply 1G deleted from MRC CWJS.
ISAC Reply 3AEE added to MRC CRBZ.
ISAC Reply 3DVF added to MRC CRBZ.
ISAC Reply 3DXM added to MRC CRBZ.
ISAC Reply 3DZM added to MRC CRBZ.
ISAC Reply 3DZO added to MRC CRBZ.
ISAC Reply 3DZP added to MRC CRBZ.
ISAC Reply 3DZT added to MRC CRBZ.
ISAC Reply 3DZV added to MRC CRBZ.
ISAC Reply 3DZW added to MRC CRBZ.
ISAC Reply 3EAW added to MRC CRBZ.
ISAC Reply 3EAX added to MRC CRBZ.
ISAC Reply 3EAY added to MRC CRBZ.
ISAC Reply 3EAZ added to MRC CRBZ.
ISAC Reply 3EBA added to MRC CRBZ.
ISAC Reply 3EBC added to MRC CRBZ.
ISAC Reply 3EBD added to MRC CRBZ.
ISAC Reply 3EBE added to MRC CRBZ.
ISAC Reply 3EBF added to MRC CRBZ.
ISAC Reply 3EBG added to MRC CRBZ.
ISAC Reply 3EBH added to MRC CRBZ.
ISAC Reply 3ECV added to MRC CRBZ.
ISAC Reply 3ECX added to MRC CRBZ.
ISAC Reply 3ECZ added to MRC CRBZ.
ISAC Reply 3HOU added to MRC CRBZ.
ISAC Reply 1A deleted from MRC CRBZ.
ISAC Reply 1B deleted from MRC CRBZ.
ISAC Reply 1C deleted from MRC CRBZ.
ISAC Reply 1D deleted from MRC CRBZ.
ISAC Reply 1E deleted from MRC CRBZ.
ISAC Reply 1F deleted from MRC CRBZ.
ISAC Reply 1G deleted from MRC CRBZ.
ISAC Reply 1H deleted from MRC CRBZ.
ISAC Reply 1X deleted from MRC CRBZ.
ISAC Reply 1Z deleted from MRC CRBZ.
ISAC Reply 1A deleted from MRC CRBZ.
ISAC Reply 1B deleted from MRC CRBZ.
ISAC Reply 1C deleted from MRC CRBZ.
ISAC Reply 1D deleted from MRC CRBZ.
ISAC Reply 1E deleted from MRC CRBZ.
ISAC Reply 1F deleted from MRC CRBZ.
ISAC Reply 1X deleted from MRC CRBZ.
ISAC Reply 1Z deleted from MRC CRBZ.
ISAC Reply 1A deleted from MRC CRBZ.
ISAC Reply 1B deleted from MRC CRBZ.
ISAC Reply 1C deleted from MRC CRBZ.
ISAC Reply 1D deleted from MRC CRBZ.
ISAC Reply 1E deleted from MRC CRBZ.
ISAC Reply 1F deleted from MRC CRBZ.
ISAC Reply 1G deleted from MRC CRBZ.
ISAC Reply 3AEE added to MRC CRMJ.
ISAC Reply 3DVF added to MRC CRMJ.
ISAC Reply 3DVJ added to MRC CRMJ.
ISAC Reply 3DVL added to MRC CRMJ.
ISAC Reply 3DWP added to MRC CRMJ.
ISAC Reply 3DWR added to MRC CRMJ.
ISAC Reply 3DZO added to MRC CRMJ.
ISAC Reply 3DZV added to MRC CRMJ.
ISAC Reply 3EAW added to MRC CRMJ.
ISAC Reply 3EAX added to MRC CRMJ.
ISAC Reply 3EAY added to MRC CRMJ.
ISAC Reply 3EAZ added to MRC CRMJ.
ISAC Reply 3EBA added to MRC CRMJ.
ISAC Reply 3EBB added to MRC CRMJ.
ISAC Reply 3EBF added to MRC CRMJ.
ISAC Reply 3EBH added to MRC CRMJ.
ISAC Reply 3ECT added to MRC CRMJ.
ISAC Reply 3ECZ added to MRC CRMJ.
ISAC Reply 3HOU added to MRC CRMJ.
ISAC Reply 1A deleted from MRC CRMJ.
ISAC Reply 1B deleted from MRC CRMJ.
ISAC Reply 1C deleted from MRC CRMJ.
ISAC Reply 1D deleted from MRC CRMJ.
ISAC Reply 1E deleted from MRC CRMJ.
ISAC Reply 1F deleted from MRC CRMJ.
ISAC Reply 1G deleted from MRC CRMJ.
ISAC Reply 1H deleted from MRC CRMJ.
ISAC Reply 1X deleted from MRC CRMJ.
ISAC Reply 1Z deleted from MRC CRMJ.
ISAC Reply 1A deleted from MRC CRMJ.
ISAC Reply 1B deleted from MRC CRMJ.
ISAC Reply 1C deleted from MRC CRMJ.
ISAC Reply 1D deleted from MRC CRMJ.
ISAC Reply 1E deleted from MRC CRMJ.
ISAC Reply 1F deleted from MRC CRMJ.
ISAC Reply 1X deleted from MRC CRMJ.
ISAC Reply 1Z deleted from MRC CRMJ.
ISAC Reply 1A deleted from MRC CRMJ.
ISAC Reply 1B deleted from MRC CRMJ.
ISAC Reply 1C deleted from MRC CRMJ.
ISAC Reply 1D deleted from MRC CRMJ.
ISAC Reply 1E deleted from MRC CRMJ.
ISAC Reply 1F deleted from MRC CRMJ.
ISAC Reply 1G deleted from MRC CRMJ.
ISAC Reply 3AEE added to MRC ACZB.
ISAC Reply 3EDA added to MRC ACZB.
ISAC Reply 3EDH added to MRC ACZB.
ISAC Reply 3EDI added to MRC ACZB.
ISAC Reply 3HOU added to MRC ACZB.
ISAC Reply 1A deleted from MRC ACZB.
ISAC Reply 1B deleted from MRC ACZB.
ISAC Reply 1C deleted from MRC ACZB.
ISAC Reply 1D deleted from MRC ACZB.
ISAC Reply 1E deleted from MRC ACZB.
ISAC Reply 1F deleted from MRC ACZB.
ISAC Reply 1G deleted from MRC ACZB.
ISAC Reply 1H deleted from MRC ACZB.
ISAC Reply 1X deleted from MRC ACZB.
ISAC Reply 1Z deleted from MRC ACZB.
ISAC Reply 3AEE added to MRC CTHD.
ISAC Reply 3EDH added to MRC CTHD.
ISAC Reply 3HOU added to MRC CTHD.
ISAC Reply 1A deleted from MRC CTHD.
ISAC Reply 1B deleted from MRC CTHD.
ISAC Reply 1C deleted from MRC CTHD.
ISAC Reply 1D deleted from MRC CTHD.
ISAC Reply 1E deleted from MRC CTHD.
ISAC Reply 1F deleted from MRC CTHD.
ISAC Reply 1G deleted from MRC CTHD.
ISAC Reply 1H deleted from MRC CTHD.
ISAC Reply 1X deleted from MRC CTHD.
ISAC Reply 1Z deleted from MRC CTHD.
ISAC Reply 3AEE added to MRC ACZU.
ISAC Reply 3EDH added to MRC ACZU.
ISAC Reply 3HOU added to MRC ACZU.
ISAC Reply 1A deleted from MRC ACZU.
ISAC Reply 1B deleted from MRC ACZU.
ISAC Reply 1C deleted from MRC ACZU.
ISAC Reply 1D deleted from MRC ACZU.
ISAC Reply 1E deleted from MRC ACZU.
ISAC Reply 1F deleted from MRC ACZU.
ISAC Reply 1G deleted from MRC ACZU.
ISAC Reply 1H deleted from MRC ACZU.
ISAC Reply 1X deleted from MRC ACZU.
ISAC Reply 1Z deleted from MRC ACZU.
ISAC Reply 3AEE added to MRC ACZX.
ISAC Reply 3EDH added to MRC ACZX.
ISAC Reply 3EDI added to MRC ACZX.
ISAC Reply 3HOU added to MRC ACZX.
ISAC Reply 1A deleted from MRC ACZX.
ISAC Reply 1B deleted from MRC ACZX.
ISAC Reply 1C deleted from MRC ACZX.
ISAC Reply 1D deleted from MRC ACZX.
ISAC Reply 1E deleted from MRC ACZX.
ISAC Reply 1F deleted from MRC ACZX.
ISAC Reply 1G deleted from MRC ACZX.
ISAC Reply 1H deleted from MRC ACZX.
ISAC Reply 1X deleted from MRC ACZX.
ISAC Reply 1Z deleted from MRC ACZX.
ISAC Reply 3AEE added to MRC BPLC.
ISAC Reply 3EDH added to MRC BPLC.
ISAC Reply 3EDI added to MRC BPLC.
ISAC Reply 3HOU added to MRC BPLC.
ISAC Reply 1A deleted from MRC BPLC.
ISAC Reply 1B deleted from MRC BPLC.
ISAC Reply 1C deleted from MRC BPLC.
ISAC Reply 1D deleted from MRC BPLC.
ISAC Reply 1E deleted from MRC BPLC.
ISAC Reply 1F deleted from MRC BPLC.
ISAC Reply 1G deleted from MRC BPLC.
ISAC Reply 1H deleted from MRC BPLC.
ISAC Reply 1X deleted from MRC BPLC.
ISAC Reply 1Z deleted from MRC BPLC.
ISAC Reply 3AEE added to MRC ACZC.
ISAC Reply 3EDA added to MRC ACZC.
ISAC Reply 3EDH added to MRC ACZC.
ISAC Reply 3EDI added to MRC ACZC.
ISAC Reply 3HOU added to MRC ACZC.
ISAC Reply 1A deleted from MRC ACZC.
ISAC Reply 1B deleted from MRC ACZC.
ISAC Reply 1C deleted from MRC ACZC.
ISAC Reply 1D deleted from MRC ACZC.
ISAC Reply 1E deleted from MRC ACZC.
ISAC Reply 1F deleted from MRC ACZC.
ISAC Reply 1G deleted from MRC ACZC.
ISAC Reply 1H deleted from MRC ACZC.
ISAC Reply 1X deleted from MRC ACZC.
ISAC Reply 1Z deleted from MRC ACZC.
ISAC Reply 3AEE added to MRC AXGY.
ISAC Reply 3EDJ added to MRC AXGY.
ISAC Reply 3EDK added to MRC AXGY.
ISAC Reply 3EDL added to MRC AXGY.
ISAC Reply 3EDP added to MRC AXGY.
ISAC Reply 3EDQ added to MRC AXGY.
ISAC Reply 3HOU added to MRC AXGY.
ISAC Reply 1A deleted from MRC AXGY.
ISAC Reply 1B deleted from MRC AXGY.
ISAC Reply 1C deleted from MRC AXGY.
ISAC Reply 1D deleted from MRC AXGY.
ISAC Reply 1X deleted from MRC AXGY.
ISAC Reply 1Z deleted from MRC AXGY.
ISAC Reply 3AEE added to MRC AKPV.
ISAC Reply 3EDJ added to MRC AKPV.
ISAC Reply 3EDK added to MRC AKPV.
ISAC Reply 3EDP added to MRC AKPV.
ISAC Reply 3EDQ added to MRC AKPV.
ISAC Reply 3HOU added to MRC AKPV.
ISAC Reply 1A deleted from MRC AKPV.
ISAC Reply 1B deleted from MRC AKPV.
ISAC Reply 1C deleted from MRC AKPV.
ISAC Reply 1D deleted from MRC AKPV.
ISAC Reply 1X deleted from MRC AKPV.
ISAC Reply 1Z deleted from MRC AKPV.
ISAC Reply 3AEE added to MRC ABTB.
ISAC Reply 3EDJ added to MRC ABTB.
ISAC Reply 3EDK added to MRC ABTB.
ISAC Reply 3EDL added to MRC ABTB.
ISAC Reply 3EDP added to MRC ABTB.
ISAC Reply 3EDQ added to MRC ABTB.
ISAC Reply 3HOU added to MRC ABTB.
ISAC Reply 1A deleted from MRC ABTB.
ISAC Reply 1B deleted from MRC ABTB.
ISAC Reply 1C deleted from MRC ABTB.
ISAC Reply 1D deleted from MRC ABTB.
ISAC Reply 1X deleted from MRC ABTB.
ISAC Reply 1Z deleted from MRC ABTB.
ISAC Reply 3AEE added to MRC ABTD.
ISAC Reply 3EDJ added to MRC ABTD.
ISAC Reply 3EDK added to MRC ABTD.
ISAC Reply 3EDP added to MRC ABTD.
ISAC Reply 3EDQ added to MRC ABTD.
ISAC Reply 3HOU added to MRC ABTD.
ISAC Reply 1A deleted from MRC ABTD.
ISAC Reply 1B deleted from MRC ABTD.
ISAC Reply 1C deleted from MRC ABTD.
ISAC Reply 1D deleted from MRC ABTD.
ISAC Reply 1X deleted from MRC ABTD.
ISAC Reply 1Z deleted from MRC ABTD.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3EDJ added to MRC THSD.
ISAC Reply 3EDK added to MRC THSD.
ISAC Reply 3EDP added to MRC THSD.
ISAC Reply 3EDQ added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1A deleted from MRC THSD.
ISAC Reply 1B deleted from MRC THSD.
ISAC Reply 1C deleted from MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1X deleted from MRC THSD.
ISAC Reply 1Z deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3EDJ added to MRC CQJX.
ISAC Reply 3EDK added to MRC CQJX.
ISAC Reply 3EDP added to MRC CQJX.
ISAC Reply 3EDQ added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1A deleted from MRC CQJX.
ISAC Reply 1B deleted from MRC CQJX.
ISAC Reply 1C deleted from MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1X deleted from MRC CQJX.
ISAC Reply 1Z deleted from MRC CQJX.
ISAC Reply 3AEE added to MRC CMLP.
ISAC Reply 3EDJ added to MRC CMLP.
ISAC Reply 3EDK added to MRC CMLP.
ISAC Reply 3EDP added to MRC CMLP.
ISAC Reply 3HOU added to MRC CMLP.
ISAC Reply 1A deleted from MRC CMLP.
ISAC Reply 1B deleted from MRC CMLP.
ISAC Reply 1C deleted from MRC CMLP.
ISAC Reply 1D deleted from MRC CMLP.
ISAC Reply 1X deleted from MRC CMLP.
ISAC Reply 1Z deleted from MRC CMLP.
ISAC Reply 3AEE added to MRC AEJN.
ISAC Reply 3CVB added to MRC AEJN.
ISAC Reply 3CVG added to MRC AEJN.
ISAC Reply 3CVK added to MRC AEJN.
ISAC Reply 3CVM added to MRC AEJN.
ISAC Reply 3CVQ added to MRC AEJN.
ISAC Reply 3CVR added to MRC AEJN.
ISAC Reply 3CVW added to MRC AEJN.
ISAC Reply 3HOU added to MRC AEJN.
ISAC Reply 1A deleted from MRC AEJN.
ISAC Reply 1B deleted from MRC AEJN.
ISAC Reply 1C deleted from MRC AEJN.
ISAC Reply 1D deleted from MRC AEJN.
ISAC Reply 1X deleted from MRC AEJN.
ISAC Reply 1Z deleted from MRC AEJN.
ISAC Reply 1A deleted from MRC AEJN.
ISAC Reply 1B deleted from MRC AEJN.
ISAC Reply 1C deleted from MRC AEJN.
ISAC Reply 1D deleted from MRC AEJN.
ISAC Reply 1X deleted from MRC AEJN.
ISAC Reply 1Z deleted from MRC AEJN.
ISAC Reply 3AEE added to MRC ABKQ.
ISAC Reply 3CUZ added to MRC ABKQ.
ISAC Reply 3CVE added to MRC ABKQ.
ISAC Reply 3CVG added to MRC ABKQ.
ISAC Reply 3CVM added to MRC ABKQ.
ISAC Reply 3CVN added to MRC ABKQ.
ISAC Reply 3CVQ added to MRC ABKQ.
ISAC Reply 3CVR added to MRC ABKQ.
ISAC Reply 3EDT added to MRC ABKQ.
ISAC Reply 3HOU added to MRC ABKQ.
ISAC Reply 1A deleted from MRC ABKQ.
ISAC Reply 1B deleted from MRC ABKQ.
ISAC Reply 1C deleted from MRC ABKQ.
ISAC Reply 1D deleted from MRC ABKQ.
ISAC Reply 1X deleted from MRC ABKQ.
ISAC Reply 1Z deleted from MRC ABKQ.
ISAC Reply 1A deleted from MRC ABKQ.
ISAC Reply 1B deleted from MRC ABKQ.
ISAC Reply 1C deleted from MRC ABKQ.
ISAC Reply 1D deleted from MRC ABKQ.
ISAC Reply 1X deleted from MRC ABKQ.
ISAC Reply 1Z deleted from MRC ABKQ.
ISAC Reply 3AEE added to MRC ABKR.
ISAC Reply 3CUZ added to MRC ABKR.
ISAC Reply 3CVA added to MRC ABKR.
ISAC Reply 3CVE added to MRC ABKR.
ISAC Reply 3CVG added to MRC ABKR.
ISAC Reply 3CVM added to MRC ABKR.
ISAC Reply 3CVN added to MRC ABKR.
ISAC Reply 3CVQ added to MRC ABKR.
ISAC Reply 3EDT added to MRC ABKR.
ISAC Reply 3HOU added to MRC ABKR.
ISAC Reply 1A deleted from MRC ABKR.
ISAC Reply 1B deleted from MRC ABKR.
ISAC Reply 1C deleted from MRC ABKR.
ISAC Reply 1D deleted from MRC ABKR.
ISAC Reply 1X deleted from MRC ABKR.
ISAC Reply 1Z deleted from MRC ABKR.
ISAC Reply 1A deleted from MRC ABKR.
ISAC Reply 1B deleted from MRC ABKR.
ISAC Reply 1C deleted from MRC ABKR.
ISAC Reply 1D deleted from MRC ABKR.
ISAC Reply 1X deleted from MRC ABKR.
ISAC Reply 1Z deleted from MRC ABKR.
ISAC Reply 3AEE added to MRC CSQJ.
ISAC Reply 3CUZ added to MRC CSQJ.
ISAC Reply 3CVQ added to MRC CSQJ.
ISAC Reply 3HOU added to MRC CSQJ.
ISAC Reply 1A deleted from MRC CSQJ.
ISAC Reply 1B deleted from MRC CSQJ.
ISAC Reply 1C deleted from MRC CSQJ.
ISAC Reply 1D deleted from MRC CSQJ.
ISAC Reply 1X deleted from MRC CSQJ.
ISAC Reply 1Z deleted from MRC CSQJ.
ISAC Reply 1A deleted from MRC CSQJ.
ISAC Reply 1B deleted from MRC CSQJ.
ISAC Reply 1C deleted from MRC CSQJ.
ISAC Reply 1D deleted from MRC CSQJ.
ISAC Reply 1X deleted from MRC CSQJ.
ISAC Reply 1Z deleted from MRC CSQJ.
ISAC Reply 3AEE added to MRC CQKH.
ISAC Reply 3CUZ added to MRC CQKH.
ISAC Reply 3CVQ added to MRC CQKH.
ISAC Reply 3HOU added to MRC CQKH.
ISAC Reply 1A deleted from MRC CQKH.
ISAC Reply 1B deleted from MRC CQKH.
ISAC Reply 1C deleted from MRC CQKH.
ISAC Reply 1D deleted from MRC CQKH.
ISAC Reply 1X deleted from MRC CQKH.
ISAC Reply 1Z deleted from MRC CQKH.
ISAC Reply 1A deleted from MRC CQKH.
ISAC Reply 1B deleted from MRC CQKH.
ISAC Reply 1C deleted from MRC CQKH.
ISAC Reply 1D deleted from MRC CQKH.
ISAC Reply 1X deleted from MRC CQKH.
ISAC Reply 1Z deleted from MRC CQKH.
ISAC Reply 3AEE added to MRC AFFL.
ISAC Reply 3CVQ added to MRC AFFL.
ISAC Reply 3EDT added to MRC AFFL.
ISAC Reply 3HOU added to MRC AFFL.
ISAC Reply 1A deleted from MRC AFFL.
ISAC Reply 1B deleted from MRC AFFL.
ISAC Reply 1C deleted from MRC AFFL.
ISAC Reply 1D deleted from MRC AFFL.
ISAC Reply 1X deleted from MRC AFFL.
ISAC Reply 1Z deleted from MRC AFFL.
ISAC Reply 1A deleted from MRC AFFL.
ISAC Reply 1B deleted from MRC AFFL.
ISAC Reply 1C deleted from MRC AFFL.
ISAC Reply 1D deleted from MRC AFFL.
ISAC Reply 1X deleted from MRC AFFL.
ISAC Reply 1Z deleted from MRC AFFL.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED36166*)
TTQYJTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TTQYJAAW2*;TTQYJAAW2$$JAAW3*;TTQYJAAW2$JAAW2*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AFZ | BANANA JACK |
| AAB | BANANA PLUG |
| ABL | BINDING POST |
| AAD | BONDING PAD |
| AGA | BUS (BAR) CONDUCTOR |
| AGB | BUSHING |
| AEP | CABLE W/CONNECTOR |
| ABN | CLAMP |
| ADB | CLIP |
| AGC | COLLAR/RING |
| ACT | COMPONENT SOCKET |
| AEB | COMPRESSION |
| ACN | CONNECTOR, PLUG |
| AAF | CONNECTOR, RECEPTACLE |
| AJT | ELECTRON TUBE BASE |
| ABR | EYELET |
| AGD | FEED THRU |
| AAH | FERRULE |
| AGE | FERRULE CLIP |
| AEC | KNIFE BLADE |
| AGF | LINE CORD |
| AGH | PHONE JACK |
| AAM | PIN |
| ACR | PRINTED CIRCUIT |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| AAR | RIBBON |
| ABQ | SCREW |
| AEF | SLOTTED LUG |
| ADC | SNAP-ON, FEMALE |
| ADF | SNAP-ON, MALE |
| AAS | SOLDER STUD |
| AEK | SOLDERLESS LUG |
| AGQ | STANDOFF CLIP |
| AGR | STANDOFF INSULATOR |
| AGS | STANDOFF, SCREW |
| AGT | STANDOFF, SOCKET |
| AAW | STANDOFF, SOLDER LUG |
| AGW | STANDOFF, SOLDERLESS LUG |
| AAY | STANDOFF, THREADED STUD |
| ABA | STANDOFF, WIRE LEAD |
| ABX | TAB W/SCREW |
| ABB | TAB, SOLDER LUG |
| AGX | TERMINAL BLOCK W/SCREWS |
| ABC | THREADED HOLE |
| ABD | THREADED STUD |
| AHA | THUMB SCREW |
| AHB | TIP JACK |
| ACB | TURRET |
| ACM | WIRE HOOK |
| ACC | WIRE LEAD |
| AGY | WIRE LEAD W/CLAMP |
| AEG | WIRE LEAD W/LUG |
| AGZ | WIRE LEAD W/TUBE CAP |
| ACD | WIRE LOOP |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
CWJSJWINDING OPERATING VOLTAGE
THE VALUE/S/ OF THE OPERATING VOLTAGE APPLIED TO THE WINDING.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 & 4 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWJS3DZMJBVA2.0*;CWJS3DZMJBVA2.0$JBVA2.0*;CWJS3DZMJBVA2.0$$JBVA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DVF | FIRST COMPONENT FIRST PRIMARY |
| 3DVI | FIRST COMPONENT FIRST SECONDARY |
| 3DVJ | FIRST COMPONENT FIRST WINDING |
| 3DVL | FIRST COMPONENT FIRST CONTROL |
| 3DVO | FIRST COMPONENT SECOND PRIMARY OUTPUT |
| 3DVP | FIRST COMPONENT SECOND SECONDARY |
| 3DWG | FIRST COMPONENT SINGLE PRIMARY |
| 3DWH | FIRST COMPONENT SINGLE PRIMARY INPUT |
| 3DWI | FIRST COMPONENT SINGLE PRIMARY OUTPUT |
| 3DWN | FIRST COMPONENT ALL PRIMARY |
| 3DXC | SECOND COMPONENT SECOND PRIMARY OUTPUT |
| 3DXL | SECOND COMPONENT SINGLE PRIMARY OUTPUT |
| 3DXM | SECOND COMPONENT SINGLE SECONDARY |
| 3DZM | SINGLE COMPONENT FIRST PRIMARY |
| 3DZN | SINGLE COMPONENT FIRST PRIMARY INPUT |
| 3DZO | SINGLE COMPONENT FIRST PRIMARY OUTPUT |
| 3DZP | SINGLE COMPONENT FIRST SECONDARY |
| 3DZT | SINGLE COMPONENT SECOND PRIMARY |
| 3DZU | SINGLE COMPONENT SECOND PRIMARY INPUT |
| 3DZV | SINGLE COMPONENT SECOND PRIMARY OUTPUT |
| 3DZW | SINGLE COMPONENT SECOND SECONDARY |
| 3DZX | SINGLE COMPONENT SECOND WINDING |
| 3EAA | SINGLE COMPONENT THIRD PRIMARY |
| 3EAC | SINGLE COMPONENT THIRD PRIMARY OUTPUT |
| 3EAE | SINGLE COMPONENT THIRD WINDING |
| 3EAG | SINGLE COMPONENT FOURTH PRIMARY |
| 3EAI | SINGLE COMPONENT FOURTH PRIMARY OUTPUT |
| 3EAW | SINGLE COMPONENT SINGLE PRIMARY |
| 3EAX | SINGLE COMPONENT SINGLE PRIMARY INPUT |
| 3EAY | SINGLE COMPONENT SINGLE PRIMARY OUTPUT |
| 3EAZ | SINGLE COMPONENT SINGLE SECONDARY |
| 3EBA | SINGLE COMPONENT SINGLE WINDING |
| 3EBC | SINGLE COMPONENT SINGLE CONTROL |
| 3EBD | SINGLE COMPONENT ALL PRIMARY |
| 3EBE | SINGLE COMPONENT ALL PRIMARY INPUT |
| 3EBF | SINGLE COMPONENT ALL PRIMARY OUTPUT |
| 3EBG | SINGLE COMPONENT ALL SECONDARY |
| 3EBH | SINGLE COMPONENT ALL WINDING |
| 3ECT | ALL COMPONENTS ALL PRIMARY |
| 3ECU | ALL COMPONENTS ALL PRIMARY INPUT |
| 3ECV | ALL COMPONENTS ALL PRIMARY OUTPUT |
| 3ECW | ALL COMPONENTS ALL SECONDARY |
| 3ECZ | ALL COMPONENTS ALL CONTROL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB62) | Reply |
| B | AC |
| C | DC |
| Table 3 |
| Reply Code (AB63) | Reply |
| K | KILOVOLTS |
| M | MEGAVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 4 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRBZ*JWINDING OPERATING CURRENT
THE AMOUNT OF OPERATING CURRENT FOR WHICH THE WINDING IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 & 4 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRBZ3EBAJUAACA2.0*;CRBZ3EBAJUAACA2.0$JUAACA2.0*;CRBZ3EBAJUAACA2.0$$JUAACA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DVF | FIRST COMPONENT FIRST PRIMARY |
| 3DXM | SECOND COMPONENT SINGLE SECONDARY |
| 3DZM | SINGLE COMPONENT FIRST PRIMARY |
| 3DZO | SINGLE COMPONENT FIRST PRIMARY OUTPUT |
| 3DZP | SINGLE COMPONENT FIRST SECONDARY |
| 3DZT | SINGLE COMPONENT SECOND PRIMARY |
| 3DZV | SINGLE COMPONENT SECOND PRIMARY OUTPUT |
| 3DZW | SINGLE COMPONENT SECOND SECONDARY |
| 3EAW | SINGLE COMPONENT SINGLE PRIMARY |
| 3EAX | SINGLE COMPONENT SINGLE PRIMARY INPUT |
| 3EAY | SINGLE COMPONENT SINGLE PRIMARY OUTPUT |
| 3EAZ | SINGLE COMPONENT SINGLE SECONDARY |
| 3EBA | SINGLE COMPONENT SINGLE WINDING |
| 3EBC | SINGLE COMPONENT SINGLE CONTROL |
| 3EBD | SINGLE COMPONENT ALL PRIMARY |
| 3EBE | SINGLE COMPONENT ALL PRIMARY INPUT |
| 3EBF | SINGLE COMPONENT ALL PRIMARY OUTPUT |
| 3EBG | SINGLE COMPONENT ALL SECONDARY |
| 3EBH | SINGLE COMPONENT ALL WINDING |
| 3ECV | ALL COMPONENTS ALL PRIMARY OUTPUT |
| 3ECX | ALL COMPONENTS ALL WINDING |
| 3ECZ | ALL COMPONENTS ALL CONTROL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN86) | Reply |
| AM | AMPERES |
| UA | MICROAMPERES |
| LA | MILLIAMPERES |
| Table 3 |
| Reply Code (AN87) | Reply |
| AC | AC |
| DC | DC |
| Table 4 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRMJ*JWINDING POWER RATING
THE MAXIMUM POWER FOR WHICH THE WINDING OF THE ITEM IS RATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRMJ3DVLJDB2.0*;CRMJ3DVLJDB2.0$JDB2.0*;CRMJ3DVLJDB2.0$$JDB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DVF | FIRST COMPONENT FIRST PRIMARY |
| 3DVJ | FIRST COMPONENT FIRST WINDING |
| 3DVL | FIRST COMPONENT FIRST CONTROL |
| 3DWP | FIRST COMPONENT ALL PRIMARY OUTPUT |
| 3DWR | FIRST COMPONENT ALL WINDING |
| 3DZO | SINGLE COMPONENT FIRST PRIMARY OUTPUT |
| 3DZV | SINGLE COMPONENT SECOND PRIMARY OUTPUT |
| 3EAW | SINGLE COMPONENT SINGLE PRIMARY |
| 3EAX | SINGLE COMPONENT SINGLE PRIMARY INPUT |
| 3EAY | SINGLE COMPONENT SINGLE PRIMARY OUTPUT |
| 3EAZ | SINGLE COMPONENT SINGLE SECONDARY |
| 3EBA | SINGLE COMPONENT SINGLE WINDING |
| 3EBB | SINGLE COMPONENT SINGLE TERTIARY |
| 3EBF | SINGLE COMPONENT ALL PRIMARY OUTPUT |
| 3EBH | SINGLE COMPONENT ALL WINDING |
| 3ECT | ALL COMPONENTS ALL PRIMARY |
| 3ECZ | ALL COMPONENTS ALL CONTROL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN86) | Reply |
| DB | DECIBELS |
| KA | KILOVOLT-AMPERES |
| LW | MILLIWATTS |
| EA | VOLTS-AMPERES |
| WW | WATTS |
ACZBJFREQUENCY RATING
THE NUMBER OF COMPLETE CYCLIC CHANGES,PER UNIT OF TIME,FOR WHICH AN ITEM IS RATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACZB3EDAJMA2.0*;ACZB3EDAJMA2.0$JMA2.0*;ACZB3EDAJMA2.0$$JMA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDA | FIRST COMPONENT |
| 3EDH | SINGLE COMPONENT |
| 3EDI | ALL COMPONENTS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC32) | Reply |
| E | HERTZ |
| K | KILOHERTZ |
| M | MEGAHERTZ |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CTHD*JADJUSTMENT METHOD AND QUANTITY
THE MEANS PROVIDED AND NUMBER OF ADJUSTMENTS INCLUDED ON THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(CTHD3EDHJADY2*;CTHD3EDHJADY2$$JADY3*;CTHD3EDHJADY2$JADY2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDH | SINGLE COMPONENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AL41) | Reply |
| ADT | ADJUSTABLE CAPACITOR |
| ADY | ADJUSTABLE CONTROL |
| ADW | ADJUSTABLE CORE |
| ADX | ADJUSTABLE CUP |
ACZU*DADJUSTMENT DEVICE DRIVE TYPE
INDICATES THE TYPE OF DRIVE PROVIDED FOR THE ADJUSTMENT DEVICE.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACZU3EDHDAAB*;ACZU3EDHDAAB$DAAQ*;ACZU3EDHDAAB$$DAAQ*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDH | SINGLE COMPONENT |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AE10) | Reply |
| AAQ | DOUBLE FLATTED SCREW |
| AAR | DOUBLE FLATTED SHAFT |
| AAG | HEX NUT |
| AAN | HEX SOCKET |
| AAC | LEVER |
| ABA | SCREW W/FLATTED END |
| AAB | SHAFT |
| AAF | SLOTTED SCREW |
ACZX*DWINDING SHIELDING METHOD
THE MEANS BY WHICH A PROTECTIVE METAL SCREEN,PLATE,OR INCLOSURE IS PLACED AROUND OR BETWEEN THE WINDINGS OF AN ITEM TO PREVENT ELECTROSTATIC OR MAGNETIC COUPLING.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACZX3EDHDBH*;ACZX3EDHDBH$DBE*;ACZX3EDHDBH$$DBE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDH | SINGLE COMPONENT |
| 3EDI | ALL COMPONENTS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC18) | Reply |
| AB | CORE GROUNDED |
| AC | CORE GROUNDED AND BROUGHT OUT TO TERMINAL |
| AD | CORE GROUNDED TO INCLOSURE |
| AE | CORE GROUNDED TO INCLOSURE AND BROUGHT OUT TO TERMINAL |
| AF | CORE GROUNDED TO SECONDARY TERMINAL |
| AG | EXTERNAL INCLOSURE |
| AH | EXTERNAL INCLOSURE CONNECTED TO TERMINAL |
| AJ | EXTERNAL INCLOSURE GROUNDED AND BROUGHT OUT TO TERMINAL |
| AK | EXTERNALLY GROUNDED AND BROUGHT OUT TO TERMINAL |
| AL | GROUND BROUGHT OUT TO TERMINAL |
| AM | GROUNDED TO CORE AND MOUNTING |
| AQ | GROUNDED TO INCLOSURE AND BROUGHT OUT TO TERMINAL |
| AN | GROUNDED TO INCLOSURE, CORE AND BROUGHT OUT TO TERMINAL |
| AP | GROUNDED TO INCLOSURE, CORE AND MOUNTING |
| AR | INCLOSURE GROUNDED |
| AS | INTERNAL SHIELD BROUGHT OUT TO CABLE SHIELD |
| AT | INTERNAL SHIELD BROUGHT OUT TO TERMINAL |
| AW | INTERNAL SHIELD CONNECTED TO SECONDARY TERMINAL |
| AX | INTERNAL SHIELD EXTERNALLY CONNECTED TO SECONDARY CENTER TAP |
| AY | INTERNAL SHIELD GROUNDED TO CORE |
| AZ | INTERNAL SHIELD GROUNDED TO CORE AND BROUGHT OUT TO TERMINAL |
| BA | INTERNAL SHIELD GROUNDED TO CORE AND MOUNTING |
| BB | INTERNAL SHIELD GROUNDED TO INCLOSURE |
| BC | INTERNAL SHIELD GROUNDED TO INCLOSURE AND BROUGHT OUT TO TERMINAL |
| BD | INTERNAL SHIELD GROUNDED TO INCLOSURE AND CORE |
| BE | INTERNAL SHIELD GROUNDED TO INCLOSURE AND CORE AND BROUGHT OUT TO TERMINAL |
| BF | INTERNAL SHIELD GROUNDED TO INCLOSURE AND SECONDARY CENTER TAP |
| BG | INTERNAL SHIELD GROUNDED TO MOUNTING |
| BH | INTERNAL SHIELD GROUNDED TO SECONDARY CENTER TAP |
| BJ | INTERNAL SHIELD GROUNDED TO TERMINAL |
| BK | INTERNALLY SHIELDED |
| BL | INTERNALLY SHIELDED AND BROUGHT OUT TO PRIMARY TERMINAL |
| BM | INTERNALLY SHIELDED GROUNDED TO CORE AND MOUNTING |
| BN | INTERNALLY SHIELDED GROUNDED TO MOUNTING |
| BP | PRIMARY AND SECONDARY SHIELDED AND BROUGHT OUT TO TERMINAL |
| BQ | PRIMARY SHIELD GROUNDED TO INCLOSURE AND SECONDARY SHIELD BROUGHT OUT TO TERMINAL |
| BR | SECONDARY GROUNDED TO INCLOSURE AND BROUGHT OUT TO TERMINAL |
BPLC*JWINDING FUNCTION AND QUANTITY
THE PURPOSE AND THE TOTAL NUMBER OF INDIVIDUAL (NOT ELECTRICALLY CONNECTED) WINDINGS DESIGNED TO PERFORM IN A TRANSFORMER.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit.
(BPLC3AEEJC2*;BPLC3AEEJC2$$JC3*;BPLC3AEEJC2$JC2*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDH | SINGLE COMPONENT |
| 3EDI | ALL COMPONENTS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC03) | Reply |
| G | CONTROL |
| C | PRIMARY |
| H | PRIMARY, FIXED AUTOTRANSFORMER TYPE |
| J | PRIMARY, VARIABLE AUTOTRANSFORMER TYPE |
| E | SECONDARY |
| F | TERTIARY |
ACZC*DINPUT-OUTPUT PHASE RELATIONSHIP
THE RELATIONSHIP OF THE PHASE INPUT TO THE PHASE OUTPUT OF AN ALTERNATING CURRENT.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACZC3EDADC*;ACZC3EDADC$DE*;ACZC3EDADC$$DE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDA | FIRST COMPONENT |
| 3EDH | SINGLE COMPONENT |
| 3EDI | ALL COMPONENTS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AE07) | Reply |
| B | SINGLE PHASE TO SINGLE PHASE |
| K | SINGLE PHASE TO SIX PHASE |
| L | SINGLE PHASE TO THREE PHASE |
| M | SIX PHASE TO SIX PHASE |
| N | SIX PHASE TO THREE PHASE |
| J | THREE PHASE TO SINGLE PHASE |
| H | THREE PHASE TO SIX PHASE |
| G | THREE PHASE TO THREE PHASE |
| P | THREE PHASE TO TWELVE PHASE |
| F | THREE PHASE TO TWO PHASE |
| E | TWO PHASE TO SIX PHASE |
| D | TWO PHASE TO THREE PHASE |
| C | TWO PHASE TO TWO PHASE |
IF STYLE/REPLY CODE(s) ABY WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AKPV and ABTD)
IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AKPV and ABTB)
IF STYLE/REPLY CODE(s) AET OR AHF WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AKPV and THSD)
IF STYLE/REPLY CODE(s) AES OR AFA WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (THSD)
IF STYLE/REPLY CODE(s) ACC WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AFHM)
IF STYLE/REPLY CODE(s) AEW WERE ENTERED FOR MRC AXGY, YOU MUST ANSWER MRC (AKPV)
AXGY*DMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AXGY3EDJDACR*;AXGY3EDJDACR$DBSB*;AXGY3EDJDACR$$DBSB*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3EDP | SINGLE GROUP |
| 3EDQ | ALL GROUPINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AM39) | Reply |
| BDH | ADHESIVE |
| ABC | BRACKET |
| ABD | BUSHING |
| BRZ | CAPTIVE NUT |
| ABH | CLAMP |
| AEC | CLINCH NUT |
| AFL | CLIP |
| AFM | COLLAR |
| ABJ | CORE |
| BSB | EXPANSION PLUG |
| BSC | FERRULE |
| ACR | FLANGE |
| AEY | FOOT |
| ABL | FRICTION |
| BSD | HUB |
| ABP | PLUG-IN |
| BGC | RETAINING RING |
| BEF | SHANK |
| AKC | SLEEVE |
| ABY | SLOT |
| AEF | SOCKET |
| BSF | SPADE LUG |
| AER | SPRING |
| ACB | STRAP |
| ACC | TAB |
| ACD | TERMINAL |
| AES | THREADED BODY |
| AFA | THREADED BUSHING |
| AHF | THREADED HOLE |
| AET | THREADED STUD |
| ACQ | UNTHREADED HOLE |
| AEW | UNTHREADED STUD |
| BBP | YOKE |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
AKPV*AMOUNTING FACILITY QUANTITY
THE NUMBER OF MOUNTING FACILITIES PROVIDED.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(AKPV3EDQA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDP | SINGLE GROUP |
| 3EDQ | ALL GROUPINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ABTB*JMOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTB3EDPJAC2.0*;ABTB3EDPJAC2.0$JAC2.0*;ABTB3EDPJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDL | THIRD GROUP |
| 3EDP | SINGLE GROUP |
| 3EDQ | ALL GROUPINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ABTD*JMOUNTING SLOT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING SLOT,IN DISTINCTION FROM THICKNESS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTD3EDJJAC2.0*;ABTD3EDJJAC2.0$JAC2.0*;ABTD3EDJJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDP | SINGLE GROUP |
| 3EDQ | ALL GROUPINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
AFHM*JMOUNTING TAB WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A MOUNTING TAB,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFHMJAB2.0*;AFHMJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) BA, BW, EM, JC, JE, JF, MJ, NC, NE, NF, NP, SM OR SS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX)
IF STYLE/REPLY CODE(s) NJ OR UN WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX and CMLP)
IF STYLE/REPLY CODE(s) JS, NM OR NS WERE ENTERED FOR MRC THSD, YOU MUST ANSWER MRC (CQJX) or (CMLP)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3EDPDSM*;THSD3EDPDSM$DNF*;THSD3EDPDSM$$DNF*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDP | SINGLE GROUP |
| 3EDQ | ALL GROUPINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| BA | BA |
| BW | BRITISH STANDARD WHITWORTH (BSW) |
| SM | ISO M |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NP | NPT |
| UN | UN |
| NC | UNC |
| NE | UNEF |
| NF | UNF |
| NJ | UNIFIED NATIONAL FINE (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| JS | UNJS |
| NM | UNM |
| NS | UNS |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AEEJA2.0*;CQJX3AEEJA2.0$JA2.0*;CQJX3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDP | SINGLE GROUP |
| 3EDQ | ALL GROUPINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the applicable ISAC from the table below followed by the mode code, followed by a alpha-numeric reply with a minimum of one character.
(CMLP3EDKAM3)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3EDJ | FIRST GROUP |
| 3EDK | SECOND GROUP |
| 3EDP | SINGLE GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
AEJN*JDISTANCE BETWEEN MOUNTING FACILITY CENTERS
THE DISTANCE BETWEEN MOUNTING FACILITY CENTERS.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJN3CVMJAA2.0*;AEJN3CVMJAA2.0$JAA2.0*;AEJN3CVMJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CVB | FIRST MOUNTING FACILITY SINGLE CENTER GROUP |
| 3CVG | SECOND MOUNTING FACILITY SINGLE CENTER GROUP |
| 3CVK | THIRD MOUNTING FACILITY SINGLE CENTER GROUP |
| 3CVM | SINGLE MOUNTING FACILITY FIRST CENTER GROUP |
| 3CVQ | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| 3CVR | SINGLE MOUNTING FACILITY ALL CENTER GROUPINGS |
| 3CVW | ALL MOUNTING FACILITIES ALL CENTER GROUPINGS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ABKQ*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH
THE DISTANCE BETWEEN THE CENTER OF ONE MOUNTING FACILITY AND THE CENTER OF THE ADJACENT MOUNTING FACILITY PARALLEL TO THE LENGTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKQ3CVGJAB2.0*;ABKQ3CVGJAB2.0$JAB2.0*;ABKQ3CVGJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CUZ | FIRST MOUNTING FACILITY FIRST CENTER GROUP |
| 3CVE | SECOND MOUNTING FACILITY SECOND CENTER GROUP |
| 3CVG | SECOND MOUNTING FACILITY SINGLE CENTER GROUP |
| 3CVM | SINGLE MOUNTING FACILITY FIRST CENTER GROUP |
| 3CVN | SINGLE MOUNTING FACILITY SECOND CENTER GROUP |
| 3CVQ | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| 3CVR | SINGLE MOUNTING FACILITY ALL CENTER GROUPINGS |
| 3EDT | ALL MOUNTING FACILITIES SINGLE CENTER GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKR*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH
THE DISTANCE BETWEEN THE CENTER OF ONE MOUNTING FACILITY AND THE CENTER OF THE ADJACENT MOUNTING FACILITY PARALLEL TO THE WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKR3CVQJAB2.0*;ABKR3CVQJAB2.0$JAB2.0*;ABKR3CVQJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CUZ | FIRST MOUNTING FACILITY FIRST CENTER GROUP |
| 3CVA | FIRST MOUNTING FACILITY SECOND CENTER GROUP |
| 3CVE | SECOND MOUNTING FACILITY SECOND CENTER GROUP |
| 3CVG | SECOND MOUNTING FACILITY SINGLE CENTER GROUP |
| 3CVM | SINGLE MOUNTING FACILITY FIRST CENTER GROUP |
| 3CVN | SINGLE MOUNTING FACILITY SECOND CENTER GROUP |
| 3CVQ | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| 3EDT | ALL MOUNTING FACILITIES SINGLE CENTER GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CSQJ*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE
THE DISTANCE BETWEEN THE CENTER OF ONE MOUNTING FACILITY AND THE CENTER OF THE ADJACENT MOUNTING FACILITY PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSQJ3CUZJAA2.0*;CSQJ3CUZJAA2.0$JAA2.0*;CSQJ3CUZJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CUZ | FIRST MOUNTING FACILITY FIRST CENTER GROUP |
| 3CVQ | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQKH*JCENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE BASE OF AN ISOSCELES TRIANGLE
THE DISTANCE BETWEEN THE CENTER OF ONE MOUNTING FACILITY AND THE CENTER OF THE ADJACENT MOUNTING FACILITY PARALLEL TO THE BASE OF AN ISOSCELES TRIANGLE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQKH3AEEJAC2.0*;CQKH3AEEJAC2.0$JAC2.0*;CQKH3AEEJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CUZ | FIRST MOUNTING FACILITY FIRST CENTER GROUP |
| 3CVQ | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFFL*JMOUNTING BOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFFL3EDTJAC2.0*;AFFL3EDTJAC2.0$JAC2.0*;AFFL3EDTJAC2.0$$JAC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CVQ | SINGLE MOUNTING FACILITY SINGLE CENTER GROUP |
| 3EDT | ALL MOUNTING FACILITIES SINGLE CENTER GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKNADINCLOSURE TYPE
INDICATES THE TYPE OF INCLOSURE PROVIDED TO COAT,COVER,PROTECT,OR ENCASE THE ITEM.
Enter the applicable reply code from the table below
(AKNADAD)
| Table 1 |
| Reply Code (AG85) | Reply |
| AH | FULLY INCLOSED |
| AJ | FULLY INCLOSED WITH OIL |
| AD | HERMETICALLY SEALED |
| AK | HERMETICALLY SEALED WITH OIL |
| AE | OPEN |
| AP | PARTIALLY INCLOSED |
| AF | PARTIALLY INCLOSED, DOUBLE SHELL |
| AG | PARTIALLY INCLOSED, HALF SHELL |
ADAQ*JBODY LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE BODY,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAQJAB2.0*;ADAQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ADAR*JBODY OUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADARJAC2.0*;ADARJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ADAU*JBODY HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE BODY,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAUJAB2.0*;ADAUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ADAT*JBODY WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE BODY,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADATJAA2.0*;ADATJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCM2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CD | CUBIC DECIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
| CB | CUBIC MILLIMETERS |
| CY | CUBIC YARDS |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDBZA*;CBBLDAXJ$$DCNK*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CNK | COLOR CODED LEAD |
| CNL | COLOR CODED TERMINAL |
| CNH | LEFT HAND WOUND COIL |
| CCS | PROTECTIVE COVER |
| CNJ | RIGHT HAND WOUND COIL |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| BRP | SPECIAL MARKING |
| CAR | TINNED WIRE LEADS |
| CND | W/ARRESTOR |
| CNE | W/CAPACITOR |
| CNF | W/OVERLOAD PROTECTION |
| CNG | W/RECTIFIER |
| BZA | W/RESISTOR |
| AXJ | W/SWITCH |
IF STYLE/REPLY CODE(s) E WERE ENTERED FOR MRC AARG, YOU MUST ANSWER MRC (AARH)
AARG*DRELIABILITY INDICATOR
AN INDICATION THAT THE LEVEL OF PROBABILITY THAT AN ITEM WILL OPERATE WITHOUT FAILURE,AT A SPECIFIED RATED CAPABILITY,AT A SPECIFIED TEMPERATURE,AND FOR A SPECIFIED PERIOD OF TIME,HAS BEEN ESTABLISHED BY TESTING RANDOM SAMPLES OF PRODUCTION LOT.
Enter the applicable reply code from the table below
(AARGDN)
| Table 1 |
| Reply Code (AA61) | Reply |
| E | ESTABLISHED |
| N | NOT ESTABLISHED |
AARH*BRELIABILITY FAILURE RATE LEVEL IN PERCENT
THE RATE OF FAILURE DETERMINED UNDER SPECIFIED CONDITIONS TO ESTABLISH THE RELIABILITY OF AN ITEM,EXPRESSED IN PERCENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AARHB2.0)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
IF STYLE/REPLY CODE(s) BB OR BC WERE ENTERED FOR MRC ENAC, YOU MUST ANSWER MRC (ALAX)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDBB)
| Table 1 |
| Reply Code (EN02) | Reply |
| GJ | DISTRIBUTION TRANSFORMERS - FEMP-SUSPENDED - ENERGY EFFICIENT PRODUCTS |
| BB | FLUID-FILLED TRANSFORMERS - SYNTHETIC ESTER-BASED - BIOBASED |
| BC | FLUID-FILLED TRANSFORMERS - VEGETABLE OIL-BASED - BIOBASED |
| NR | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
ALAX*BBIOBASED CONTENT PERCENTAGE
THE STATED PERCENTAGE OF THE ITEM'S CONTENT THAT IS BIOBASED.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ALAXB2.0)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
ACZD*DTRANSFORMER WINDING CONNECTION TYPE
INDICATES THE TYPE OF CONNECTING WINDINGS IN A TRANSFORMER TO BE POWERED BY TWO OR THREE PHASE CURRENTS.
Enter the applicable reply code from the table below
(ACZDDH*;ACZDDM$DK*;ACZDDM$$DK*)
| Table 1 |
| Reply Code (AE08) | Reply |
| B | DELTA-DELTA |
| C | DELTA-WYE |
| E | OPEN DELTA-OPEN DELTA |
| L | OPEN DELTA-WYE |
| F | SCOTT |
| G | TAYLOR |
| H | WYE-DELTA |
| M | WYE-DELTA-WYE |
| J | WYE-OPEN DELTA |
| K | WYE-WYE |
Reference Notes Refer to Reference Drawings for assitance in answering this MRC.
AEHZ*JMAXIMUM OPERATING TEMP
THE MAXIMUM TEMPERATURE AT WHICH THE ITEM IS RATED TO OPERATE FOR AN EXTENDED PERIOD OF TIME.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEHZJC2.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
BBRJ*DSPECIAL HANDLING FEATURE
THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.
Enter the applicable reply code from the table below
(BBRJDAJ*;BBRJDAZ$$DAQ*)
| Table 1 |
| Reply Code (AM83) | Reply |
| AJ | HAZARDOUS FOR AIR TRANSPORTATION, REGULATED BY DSAM 4145.3 OR ATARAT-TARIFF-6D |
| AZ | HAZARDOUS-CONTAINS POLYCHLORINATED BIPHENYLS |
| AK | MAGNETIC |
| AQ | PILFERABLE |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDIRA000*;PRMTDRHA000$DAZA000*;PRMTDRHA000$$DAZA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAZA0002.0*;PMLCJAZA0002.0$JAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
ABFE*DHAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION
THE SPECIFIC COMMERCIAL RATING WHICH CLASSES THE ITEM AS TO WHAT DEGREE THE ITEM WILL WITHSTAND ENVIRONMENTAL ELEMENTS AND/OR HAZARDOUS LOCATIONS.
Enter the applicable reply code from the table below
(ABFEDDY*;ABFEDAT$$DEK*)
| Table 1 |
| Reply Code (AB27) | Reply |
| AA | ACID RESISTANT |
| BN | AIRTIGHT |
| FG | ALKALI RESISTANT |
| AB | CEMENT TIGHT |
| ED | CORROSION PROOF |
| DJ | CORROSION RESISTANT |
| CG | DRIPPROOF |
| FS | DRIPTIGHT |
| EF | DUST RESISTANT |
| CF | DUSTPROOF |
| DY | DUSTTIGHT |
| CE | EXPLOSION PROOF |
| FQ | EXPLOSION RESISTANT |
| FD | FIRE RESISTANT |
| FE | FIREPROOF |
| DN | FLAME RESISTANT |
| GF | FLAMEPROOF |
| DP | FUEL RESISTANT |
| DK | FUNGUS PROOF |
| CH | FUNGUS RESISTANT |
| AT | GASTIGHT |
| AP | GENERAL PURPOSE-NEMA TYPE 1 |
| GE | HUMIDITY RESISTANT |
| EC | LEAKTIGHT |
| CP | LIQUID TIGHT |
| DV | MOISTURE PROOF |
| BR | MOISTURE RESISTANT |
| DW | OIL RESISTANT |
| CJ | OILTIGHT |
| CK | RAINPROOF |
| EM | RAINTIGHT |
| GC | SALT SPRAY PROOF |
| FZ | SALT SPRAY RESISTANT |
| DT | SALT WATER RESISTANT |
| BT | SPLASHPROOF |
| CL | SPRAYTIGHT |
| DZ | SUBMERSIBLE |
| EK | VAPOR PROOF |
| ES | VAPORTIGHT |
| FM | VIBRATION PROOF |
| GB | VIBRATION RESISTANT |
| EA | WATER RESISTANT |
| CM | WATERPROOF |
| CN | WATERTIGHT |
| EG | WEATHER RESISTANT |
| DX | WEATHERPROOF |
| GG | WEATHERTIGHT |
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ027*;HZRDDHAZ012$$DHAZ027*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ012 | COPPER |
| HAZ027 | IRIDIUM |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)