A parts kit consisting of numerous items.The kit may contain seals, gaskets, packing, and/or retainers for repairing mechanical equipment. Excludes: kits including tools, collars, pins, sleeves and associated hardware. Excludes:PARTS KIT (1), SEAL REPLACEMENT, ARTILLERY.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED34944*)
AJJWACOMPONENT QUANTITY
THE NUMBER OF COMPONENTS INCLUDED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJJWA10*)
AJJZDDOCUMENT TYPE
INDICATES THE TYPE OF DOCUMENT BY THE TITLE.
Enter the applicable reply code from the table below
(AJJZDBT)
| Table 1 |
| Reply Code (AF70) | Reply |
| CB | AIR FORCE SPECIFICATION |
| BD | BILL OF MATERIAL |
| BE | CATALOG SHEET |
| CD | COMMERCIAL CATALOG |
| CH | DESIGN CONTROL DRAWING |
| AN | ENGINEERING DRAWING |
| BG | ENGINEERING PARTS LIST |
| CJ | FIELD CHANGE BULLETIN |
| BH | FORM SHEET |
| BJ | INDUSTRIAL CATALOG |
| BK | INDUSTRIAL DRAWING |
| AP | INDUSTRIAL SPECIFICATION |
| CP | LETTER |
| BL | MAINTENANCE PARTS LIST |
| EW | MANUFACTURER BILL OF MATERIAL |
| CR | MATERIAL LIST |
| CS | MFR BULLETIN |
| CT | MFR CATALOG |
| CV | MFR DRAWING |
| CX | MFR LETTER |
| BN | MILITARY DRAWING |
| CU | PACKAGE LIST |
| AL | PACKING LIST |
| BS | PARTS CATALOG |
| BT | PARTS LIST |
| BW | PURCHASE DESCRIPTION |
| BX | SERVICE BULLETIN |
| AJ | SUPPLY MANUAL |
| CA | TECHNICAL BULLETIN |
| AB | TECHNICAL MANUAL |
AYDSGEND ITEM NAME
THE APPROVED ITEM NAME OR PART NAME OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter clear text.
(AYDSGCLEARTEXT)
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDEP)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
| EN | QUENCHED |
| EP | TEMPERED |
ALQG*DCONTAINER TYPE
INDICATES THE TYPE OF CONTAINER PROVIDED.
Enter the applicable reply code from the table below
(ALQGDAH)
| Table 1 |
| Reply Code (AF72) | Reply |
| AB | BOX |
| AH | CAN |
| CX | CANNISTER |
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDSB)
| Table 1 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| AC | ACME C |
| AG | ACME G |
| MM | ACME-MODIFIED |
| MS | ACME-SPECIAL |
| AS | AMERICAN STANDARD |
| MP | AMPT |
| AN | ANPT |
| AU | ANSFH |
| PA | API |
| PB | API IF |
| RE | API REG |
| PC | API STANDARD |
| AP | APSC |
| GA | ARMOURED CONDUIT, DIN 40430 |
| AW | ASA |
| BM | ASA HOSE |
| AV | ASH |
| BA | BA |
| RZ | BRASS |
| CJ | BRITISH NONSTANDARD WHITFORM |
| DP | BRITISH STANDARD BUTTRESS |
| CY | BRITISH STANDARD CYCLE THREAD |
| CQ | BS CON |
| BF | BSF |
| ZP | BSP. L |
| DQ | BSP.C |
| FB | BSP.F |
| BE | BSP.F EXT |
| BT | BSP.F INT |
| PL | BSP.PL |
| BL | BSP.PL EXT |
| BN | BSP.PL INT |
| BP | BSP.TR |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| TP | BSTP |
| BW | BSW |
| TT | BUTTRESS |
| CS | CALIF STANDARD |
| CH | CHEMICAL HOSE |
| DW | COARSE |
| CT | CUTTING |
| DD | DARDALET |
| DE | DEVILBISS |
| DF | DEVILBISS STANDARD |
| DM | DISSYMMETRICAL PROFILE NF L05-420 |
| DS | DOUBLE STUB |
| DR | DRIVE |
| CL | EF |
| FN | FINE |
| FM | FORMING |
| FP | F-PTF |
| DX | FRENCH CONDUIT THREAD NF C68-190 |
| GE | G |
| CM | INTERNATIONAL METRIC FINE THREAD |
| AD | INTERNATIONAL SPECIAL |
| AR | INTERNATIONAL STANDARD |
| AE | IPS |
| CR | ISO FINE THREAD PITCH SERIES 1 |
| CW | ISO FINE THREAD PITCH SERIES 2 |
| CX | ISO FINE THREAD PITCH SERIES 3 |
| CZ | ISO FINE THREAD PITCH SERIES 4 |
| SY | ISO FORM |
| SM | ISO M |
| ME | ISO METRIC FINE |
| SS | ISO S |
| JL | JIC |
| LH | LOWENHERZ |
| EM | M |
| CN | METRIC |
| MN | METRIC NONSTD |
| MX | METRIC TAPERED EXTERNAL |
| MB | METRIC TAPERED EXTERNAL, DIN 158 |
| MJ | MJ |
| MF | MODIFIED ACME 2G |
| MA | MODIFIED AMERICAN NATIONAL STANDARD STRAIGHT PIPE |
| CA | N |
| NX | N 5 |
| AB | N ACME BOX |
| AX | N SPECIAL |
| BZ | N STD |
| EN | N-12 |
| YN | N-16 |
| ZN | N-2 |
| NA | N-3 ACME |
| NB | N-4 STANDARD |
| DN | NATIONAL GAS ASSOCIATION |
| BX | NC |
| CE | NC-2 |
| NY | NC-2X |
| NL | NCT |
| NQ | NEF |
| ET | NET |
| BY | NF |
| CB | NF-1 |
| CC | NF-2 |
| FS | NFS |
| NG | NGO |
| GS | NGS |
| GT | NGT |
| AF | NGTD |
| AH | NGTI |
| AJ | NGTP |
| NH | NH |
| NZ | NH-SPCL |
| NK | NONSTANDARD ROUND |
| BB | NONSTANDARD SPECIAL |
| PN | NP |
| PG | NPI |
| SP | NPS |
| SC | NPSC |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| SL | NPSL |
| PM | NPSM |
| AK | NPSN |
| NP | NPT |
| AL | NPTA |
| NT | NPTF |
| PR | NPT-MODIFIED |
| TR | NPTR |
| TS | NPTS |
| AQ | NS |
| SN | NS-2 |
| NW | NSPT |
| PK | PACIFIC COAST |
| LN | PL INT BS61 |
| PW | PT |
| PH | PTF |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PE | PTF-SPL EXTRA SHORT |
| PF | PTF-SPL SHORT |
| RR | R |
| RH | RAN HOSE |
| RL | RL |
| LB | RL(BSPL) |
| RD | ROUND |
| RJ | ROUND, DIN 20400 |
| RG | ROUND, DIN 405 |
| RM | ROUND, DIN 70156 |
| RK | ROUND, DIN 7272 |
| RP | RPT |
| RS | RS |
| SW | SAE |
| LT | SAE-LT |
| SG | SGT |
| SJ | SI |
| DA | SI FINE THREAD PITCH SERIES 1 |
| DB | SI FINE THREAD PITCH SERIES 2 |
| DC | SI FINE THREAD PITCH SERIES 3 |
| DJ | SI FINE THREAD PITCH SERIES 4 |
| DK | SI FINE THREAD PITCH SERIES 5 |
| SX | SI FORM |
| SK | SI-M |
| AY | SPECIAL |
| AZ | SPECIAL ACME |
| CF | SPECIAL MODIFIED WHITWORTH |
| PQ | SPT |
| SQ | SQUARE |
| SD | STANDARD ACME DOUBLE LEAD |
| ST | STD STUB ACME |
| CP | STEWART WARNER SPECIAL |
| SR | STI |
| SA | STUB ACME |
| SZ | STUB ACME DOUBLE LEAD |
| SE | STUB ACME M1 |
| SB | STUB ACME M2 |
| MT | SUBMARINE THD |
| TD | TAPER DRIVE |
| EX | TR EXT BS61 |
| RN | TR INT BS61 |
| TZ | TRAPEZIUM |
| AT | TWPP |
| UN | UN |
| NR | UN FORM |
| FF | UN-12 |
| FG | UN-16 |
| ZA | UN-20 |
| ZB | UN-28 |
| ZC | UN-32 |
| FC | UN-4 |
| FD | UN-6 |
| FE | UN-8 |
| NC | UNC |
| DL | UNC DOUBLE LEAD |
| DG | UND |
| BK | UNDERWRITERS |
| CG | UNDERWRITERS STANDARD TIP |
| NE | UNEF |
| DH | UNEF-2A |
| YM | UNEF-MODIFIED |
| NF | UNF |
| MD | UNF-MODIFIED |
| BD | UNG |
| BQ | UNIFIED |
| NJ | UNJ |
| JC | UNJC |
| JE | UNJEF |
| JF | UNJF |
| JS | UNJS |
| NM | UNM |
| ND | UN-MODIFIED |
| HR | UNR |
| RC | UNRC |
| RF | UNRF |
| RT | UNRS |
| NS | UNS |
| BJ | USF |
| WW | WHITWORTH |
| WF | WHITWORTH PIPE, DIN 259 |
| WG | WHITWORTH PIPE, DIN 2999 |
| WP | WHITWORTH PIPE, DIN 3858 |
| WT | WHITWORTH SELECTED THREAD |
| WH | WHITWORTH STRAIGHT EXTERNAL PIPE, DIN 259 |
| WS | WHITWORTH STRAIGHT INTERNAL PIPE, DIN 259 |
| WN | WHITWORTH STRAIGHT INTERNAL PIPE, DIN 2999 |
| WB | WHITWORTH STRAIGHT INTERNAL PIPE, DIN 3858 |
| WE | WHITWORTH TAPERED EXTERNAL PIPE, DIN 2999 |
| WA | WHITWORTH TAPERED EXTERNAL PIPE, DIN 3858 |
| WD | WOOD |
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDCK)
| Table 1 |
| Reply Code (EN02) | Reply |
| CJ | CONCRETE AND ASPHALT RELEASE FLUIDS - BIOBASED |
| CK | DE-ICERS - GENERAL PURPOSE - BIOBASED |
AJKC*GSUPPLY ITEMS AND QUANTITIES
A LISTING OF THOSE MAJOR COMPONENTS WHICH ARE COMPRISED OF A NATIONAL STOCK NUMBER,AN ITEM NAME,STANDARDIZED NAME,OR PART NAME,AND THE NUMBER OF EACH.
Enter clear text.
(AJKCGCLEARTEXT)
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
AJJX*DCOMPONENT DOCUMENT ORIGIN
THE ORIGINATOR /GOVERNMENTAL,INDUSTRIAL,OR OTHERWISE/ OF THE AVAILABLE DOCUMENT WHICH LISTS THE COMPONENT/S/ OF THE ITEM.
Enter the applicable reply code from the table below
(AJJXDAG)
| Table 1 |
| Reply Code (AF59) | Reply |
| AB | AIRCRAFT |
| AC | AUTOMOTIVE |
| AG | ENGINEERS |
| AF | GOVERNMENT |
| AD | INDUSTRIAL |
| AE | MARINE |
| AH | NAVY |
AJJY*ADOCUMENT SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS THE DOCUMENT.
Enter the alpha-numeric reply with five character(s) exactly.
(AJJYAM3L7X)
AYDR*GDOCUMENT IDENTIFICATION
THE NUMBER OR SYMBOL/S/ USED TO IDENTIFY THE DOCUMENT.
Enter clear text.
(AYDRGCLEARTEXT)
AJKB*ACOMPONENT DOCUMENT PAGE NUMBER
THE PAGE NUMBER INDICATING THE LOCATION OF THE COMPONENT/S/ LISTED IN THE DOCUMENT.
Enter the alpha-numeric reply with a minimum of one character.
(AJKBAK3)
AJKE*AEND ITEM SOURCE
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER SOURCE,WHICH CONTROLS OR MANUFACTURES THE END ITEM.
Enter the alpha-numeric reply with five character(s) exactly.
(AJKEAD0L3E)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
AFJH*GFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter clear text.
(AFJHGCLEARTEXT)
AKVZ*JACCESSORY IDENTIFYING NUMBER
THE SPECIFIC NUMBER USED TO IDENTIFY THE ACCESSORY.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(AKVZJAGTEXT1234*)
| Table 1 |
| Reply Code (AG99) | Reply |
| AL | CATALOG NO. |
| AB | DRAWING NO. |
| AC | MODEL NO. |
| AD | PART NO. |
| AA | REFERENCE NO. |
| AE | SERIAL NO. |
| AJ | SET NO. |
| AP | SOFTWARE NO. |
| AG | SPECIFICATION NO. |
| AH | STANDARD NO. |
| AM | STOCK NO. |
| AK | STYLE NO. |
| AF | TYPE NO. |
| AN | UNIT NO. |
AMWN*AMODEL NUMBER
THE COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH COMPOSE THE ASSIGNED MODEL NUMBER OF THE ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(AMWNAJ5)
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDAMF*;ALBYDABY$DABZ*;ALBYDABY$$DABZ*)
| Table 1 |
| Reply Code (AH21) | Reply |
| AHY | SHIP |
| ABY | TRAILER |
| ABZ | TRUCK |
| AMF | VEHICULAR |
CYHX*AVEHICLE DESIGN CONTROL ACTIVITY
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER ENTITY,WHICH CONTROLS THE DESIGN OF THE VEHICLE.
Enter the alpha-numeric reply with five character(s) exactly.
(CYHXAG7A1B)
CYHY*AVEHICLE IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC VEHICLE.
Enter the alpha-numeric reply with a minimum of one character.
(CYHYAI2)
BPJZ*DUSAGE LOCATION
INDICATES THE LOCATION AT WHICH THE ITEM IS TO BE USED.
Enter the applicable reply code from the table below
(BPJZDDBX)
| Table 1 |
| Reply Code (AJ91) | Reply |
| DDK | ACTUATOR END |
| DBX | PISTON |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
ANGD*DDISPOSITION AFTER INITIAL USE
AN INDICATION OF THE DISPOSITION OF AN ITEM AFTER INITIAL USE.
Enter the applicable reply code from the table below
(ANGDDAD)
| Table 1 |
| Reply Code (AJ61) | Reply |
| AC | DISPOSABLE |
| AD | LIMITED |
| AF | NONDISPOSABLE |
| AE | NONREUSABLE |
| AB | REUSABLE |
AJAF*JUNPACKAGED UNIT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING, IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAFJAC2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJUC*AAMERICAN HOSPITAL FORMULARY SERVICE CLASSIFICATION NUMBER
AN INDICATION OF THE AMERICAN HOSPITAL FORMULARY SERVICE CLASSIFICATION NUMBER OF THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AJUCA10*)
AJAH*JUNPACKAGED UNIT HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAHJAB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAG*JUNPACKAGED UNIT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAGJLA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CD | CUBIC DECIMETERS |
| CF | CUBIC FEET |
| CN | CUBIC INCHES |
| CM | CUBIC METERS |
| CB | CUBIC MILLIMETERS |
| CY | CUBIC YARDS |
AKMX*DSTERILITY
AN INDICATION OF WHETHER OR NOT THE ITEM IS FREE OF LIVING ORGANISMS.
Enter the applicable reply code from the table below
(AKMXDM)
| Table 1 |
| Reply Code (AG96) | Reply |
| M | NONSTERILE |
| P | STERILE |
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAK0)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information