Lumber manufactured from any of the coniferous trees and designed for erecting scaffolding and walkways along the sides of buildings, ships, and the like, during construction, repair and maintenance operations.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED34665*)
CSTSDTYPICAL WOOD PRODUCTS USE
THE REQUIRED PURPOSE OR APPLICATION OF THE TYPICAL WOOD PRODUCTS FOR WHICH THE ITEM IS INTENDED.
Enter the applicable reply code from the table below
(CSTSDCH)
| Table 1 |
| Reply Code (AP62) | Reply |
| AB | ANTENNA STAKE |
| AC | BEAMS, STINGERS, POSTS, COLUMNS AND STRUTS |
| AD | BENDING OAK FOR SHIP AND BOAT CONSTRUCTION |
| AE | BEVELED SIDING FOR EXTERIOR SURFACES |
| AF | BLOCKING, WEDGES AND HEAVY MACHINERY PILE SUPPORTS |
| AG | CLEAT STOCK FOR BOXES, FURRING STRIPS AND SUBFLOORING |
| AH | COMMUNICATION AND TRANSMISSION LINES, FULL LENGTH PRESERVATIVE TREATED, GAINED AND BORED FOR TWO STANDARD CROSSARMS |
| AJ | CORE MATERIAL FOR USE IN 463 L PALLETS DESIGNATED HCU-LE |
| AK | CUTTING GRADE FOR REMANUFACTURING PURPOSES SUCH AS DOOR AND WINDOW STOCK, PATTERNS, FURNITURE AND TEMPLATES |
| AL | CUTTING GRADES FOR REMANUFACTURE |
| AM | CUTTING QUALITY FINISH GRADES USED IN LIEU OF SHOP GRADES FOR REMANUFACTURING AND FINISH PURPOSES |
| AN | DAMAGE CONTROL |
| AP | DECKING AND MANUFACTURE OF LAMINATED SHIP DECKING |
| AQ | DECKING AND PLANKING FOR BARGES |
| AR | DECKING AND PLANKING FOR SHIPS |
| AS | DECKING FOR SHIP AND CARRIER MARGINS |
| AT | DROP SIDING FOR EXTERIOR SURFACES |
| AW | DRY DOCKS AND BLOCKING |
| AX | DUNNAGE |
| AZ | EXPENSIVE HIGH QUALITY FINISH LUMBER FOR INTERIOR TRIM, DOOR AND WINDOW TRIM AND CABINETS |
| BA | FIRE-RETARDANT TREATED SCAFFOLD PLANK FOR BOATS AND SHIPS |
| BB | FIRE-RETARDANT TREATED STRESS RATED DAMAGE CONTROL SHORING |
| BG | GENERAL CONSTRUCTION, SKIDS AND HEAVY CRATING |
| BH | GENERAL PURPOSE WOOD ROD USE |
| BJ | GOOD QUALITY FINISH FOR CORNICE TRIM, DOOR AND WINDOW CASING AND CABINET WORK |
| EX | GROUND STAKE |
| BK | HARDWOOD FLOORING |
| BL | HIGH QUALITY BEAMS, STRINGERS, POSTS, TIMBERS, COLUMNS AND STRUTS |
| BM | HIGH QUALITY CONSTRUCTION AND INDUSTRIAL USES, HEAVY FRAMING AND DECKING |
| BN | HIGH QUALITY CONSTRUCTION, SHEATHING AND BLOCKING |
| BP | HIGH QUALITY FINISH INTERIOR TRIM, CABINET WORK, CASING, BASEBOARD, DOOR AND WINDOW TRIM |
| BQ | HIGH QUALITY SOFTWOOD FLOORING |
| BR | HIGHEST QUALITY AND MOST EXPENSIVE FINISH LUMBER FOR INTERIOR TRIM, CABINET WORK, DOOR AND WINDOW TRIM |
| BS | INTERIOR AND EXTERIOR TRIM |
| BT | LAMINATED OAK DECKING FOR BOATS AND SHIPS |
| BW | LATH GROUND WORK FOR PLASTERING |
| BX | LIGHT FRAMING FOR HIGH QUALITY CONSTRUCTION, STUDS AND ROOF TRUSSES |
| BY | LIGHT WEIGHT BOX AND CRATE CONSTRUCTION |
| BZ | LINE CONSTRUCTION POLES |
| CA | LOW COST CONSTRUCTION, BLOCKING, BOXES, CRATES AND DUNNAGE |
| CB | LOW QUALITY SHEATHING, DUNNAGE, BOXING AND CRATING |
| CC | MAHOGANY PLANKING FOR BOATS AND SHIPS |
| CD | ORDINARY CONSTRUCTION, BOXES, STUDS, RAFTERS AND BLOCKING |
| CE | PALLETS, BLOCKING AND BRACING |
| AY | PILES FOR COFFERDAMS, FALSE-WORK AND OTHER TEMPORARY CONSTRUCTION PRESERVATIVE TREATED FOR LAND OR FRESH WATER USE |
| BC | PILES FOR DOCKS, WHARVES AND BUILDING FOUNDATIONS PRESERVATIVE TREATED FOR COASTAL WATERS WHERE MODERATE TO HEAVY LIMNORIA ATTACK EXPECTED AND PHOLADS ARE ABSENT |
| BD | PILES FOR DOCKS, WHARVES AND BUILDING FOUNDATIONS PRESERVATIVE TREATED FOR COASTAL WATERS WHERE TEREDO PRESENT AND LIGHT LIMNORIA ACTIVITY |
| BE | PILES FOR DOCKS, WHARVES AND BUILDING FOUNDATIONS PRESERVATIVE TREATED FOR COASTAL WATERS WITH DUAL TREATMENT FOR SEVERE BORER HAZARD |
| BF | PILES FOR DOCKS, WHARVES AND BUILDING FOUNDATIONS PRESERVATIVE TREATED FOR LAND OR FRESH WATER USE |
| CF | PORT ORFORD AND ALASKA YELLOW CEDAR PLANKING FOR BOATS AND SHIPS |
| CG | PRESERVATIVE TREATED BEAMS, STRINGERS, POSTS, TIMBERS, COLUMNS AND STRUTS FOR ABOVE GROUND USE |
| CH | PRESERVATIVE TREATED BEAMS, STRINGERS, POSTS, TIMBERS, COLUMNS AND STRUTS WHERE CREOSOTE OR OIL-BORNE PRESERVATIVES ARE REQUIRED FOR USE IN FRESH WATER GROUND CONTACT |
| CJ | PRESERVATIVE TREATED BRACE, CORNER, GATE AND LINE FENCE POSTS |
| CK | PRESERVATIVE TREATED FOR HEAVY CONSTRUCTION, RAFTERS, DECKING, BEAMS AND STRINGERS FOR ABOVE GROUND USE WHERE CLEANLINESS AND PAINTABILITY REQUIRED |
| CL | PRESERVATIVE TREATED FRAMING FOR HEAVY CONSTRUCTION FOR ABOVE GROUND USE FOR CLEANLINESS AND PAINTABILITY |
| CM | PRESERVATIVE TREATED HIGH QUALITY CONSTRUCTION FOR ABOVE GROUND USE FOR CLEANLINESS AND PAINTABILITY |
| CN | PRESERVATIVE TREATED HIGH QUALITY CONSTRUCTION FOR ABOVE GROUND USE WHERE CLEANLINESS AND PAINTABILITY NOT REQUIRED |
| DZ | PRESERVATIVE TREATED HIGH QUALITY CONSTRUCTION FOR USE IN FRESH WATER OR GROUND CONTACT |
| CP | PRESERVATIVE TREATED HIGH QUALITY CONSTRUCTION WHEN CREOSOTE OR OIL-BORNE PRESERVATIVES ARE REQUIRED |
| CQ | PRESERVATIVE TREATED HIGH QUALITY DROP SIDING |
| CR | PRESERVATIVE TREATED HIGH QUALITY FLOORING OR EXTERIOR DECKING |
| CS | PRESERVATIVE TREATED OAK PLANKING FOR SHIPS |
| CT | PRESERVATIVE TREATED SHEATHING, CONCRETE FORMS, SUBFLOORING, BLOCKING AND CRATES FOR CLEANLINESS AND PAINTABILITY |
| CW | PRESERVATIVE TREATED STRESS RATED JOISTS AND PLANKS FOR USE IN CRIBBING FOR BAILEY TYPE BRIDGES |
| CX | PROPELLER SHAFT BEARINGS |
| CY | RAILROAD CROSSTIES |
| CZ | RAILWAY TURNOUT SWITCHTIES |
| DA | RED CEDAR POLES FOR COMMUNICATION AND TRANSMISSION LINES, BUTT TREATED |
| DB | ROOF AND WALL SHEATHING, SUBFLOORING, BOXES, CRATES AND PALLETS |
| DC | SCAFFOLD PLANK FOR BOATS AND SHIPS |
| DD | SEA RESCUE EQUIPMENT |
| DE | SHEATHING AND SUBFLOORING |
| DF | SHEATHING, SUBFLOORING, BOXES AND CRATES |
| DG | STAIR STEPS |
| DH | STRUCTURAL JOISTS AND PLANKS FOR HIGH QUALITY CONSTRUCTION RAFTERS, DECKING, STRINGERS AND HEAVY CRATING |
| DJ | STRUCTURAL LIGHT FRAMING, JOISTS AND PLANKS FOR HIGHEST QUALITY CONSTRUCTION |
| DK | STUD USE INCLUDING USE IN LOAD BEARING WALLS |
| DL | SUBFLOORING, DECKING AND HEAVY SHEATHING |
| DM | TANK AND BOAT CONSTRUCTION |
| DN | TEMPLATES AND PATTERNS |
| DP | TEMPORARY CONSTRUCTION, LOW GRADE BRACING, CRATING AND DUNNAGE |
| DQ | TEMPORARY SHEATHING, DUNNAGE, BOXING AND CRATING |
| DR | TIE SET AND RAILWAY TURNOUT SWITCHTIES |
| DS | VEHICLE LUMBER FOR CONSTRUCTION AND REPAIR OF VEHICLE BODIES |
| DT | VERY HIGH QUALITY AND VERY EXPENSIVE FINISH LUMBER WHERE HIGH APPEARANCE REQUIRED IN CONJUNCTION WITH STRUCTURAL REQUIREMENTS |
| DW | WEDGES AND GENERAL CONSTRUCTION |
CQWYHSPECIES-GRADE AND GRADING ASSOCIATION
AN INDICATION OF THE SPECIES AND GRADE OF THE ITEM,AND THE GRADING ASSOCIATION.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below.
(CQWYHEYCPAJ2.0*;CQWYHEYCPAJ2.0$HEYCPAJ2.0*;CQWYHEYCPAJ2.0$$HEYCPAJ2.1*)
| Table 1 |
| Reply Code (AM00) | Reply |
| DM | ALDER |
| DN | ALDER, RED |
| AA | ANY ACCEPTABLE |
| AB | ASH |
| DP | ASH, BLACK |
| DD | ASH, WHITE |
| DR | ASPEN |
| AS | BALSA |
| AT | BASSWOOD |
| DS | BASSWOOD, AMERICAN |
| AW | BEECH |
| DT | BEECH, AMERICAN |
| AX | BIRCH |
| DW | BIRCH, SWEET |
| DX | BIRCH, YELLOW |
| DY | BOXELDER |
| DZ | BUCKEYE |
| EA | BUTTERNUT |
| AH | CEDAR |
| FR | CEDAR, ALASKA |
| EC | CEDAR, ATLANTIC WHITE |
| ED | CEDAR, EASTERN RED |
| ET | CEDAR, INCENSE |
| EE | CEDAR, NORTHERN WHITE |
| FS | CEDAR, PORT ORFORD |
| EB | CEDAR, WESTERN |
| AN | CEDAR, WESTERN RED |
| BB | CHERRY |
| EF | CHERRY, BLACK |
| BC | CHESTNUT |
| HN | COACHWOOD |
| EG | COTTONWOOD |
| AJ | CYPRESS |
| AD | DOUGLAS FIR |
| HK | DOUGLAS-FIR, COASTAL |
| HL | DOUGLAS-FIR, SOUTH, INTERIOR |
| BF | ELM |
| EH | ELM, AMERICAN |
| EJ | ELM, ROCK |
| AE | FIR |
| EK | FIR, BALSAM |
| EL | FIR, GRAND |
| EM | FIR, SUBALPINE |
| BH | GUM |
| EN | GUM, BLACK |
| CW | GUM, SWEET |
| EQ | HACKBERRY |
| CC | HARDWOOD |
| FW | HEM-FIR |
| BJ | HEMLOCK |
| ER | HEMLOCK, EASTERN |
| ES | HEMLOCK, MOUNTAIN |
| DA | HEMLOCK, WESTERN |
| AC | HICKORY |
| EW | HOLLY |
| BN | LARCH |
| EX | LAUAN |
| EY | LIGNUM VITAE |
| BP | LOCUST |
| AY | LOCUST, BLACK |
| FA | LOCUST, HONEY |
| DQ | MAGNOLIA |
| BS | MAHOGANY |
| HQ | MAHOGANY, GABOON |
| BT | MAPLE |
| EZ | MAPLE, BLACK |
| EP | MAPLE, HARD |
| FB | MAPLE, RED |
| FC | MAPLE, SILVER |
| FD | MAPLE, SOFT |
| FE | MAPLE, SUGAR |
| AF | OAK |
| CK | OAK, RED |
| DG | OAK, WHITE |
| FF | PECAN |
| AK | PINE |
| BE | PINE, EASTERN WHITE |
| HP | PINE, HOOP |
| BL | PINE, IDAHO WHITE |
| BM | PINE, JACK |
| BQ | PINE, LODGEPOLE |
| FJ | PINE, NORWAY |
| FG | PINE, PITCH |
| CB | PINE, PONDEROSA |
| CQ | PINE, SOUTHERN |
| CT | PINE, SUGAR |
| CD | POPLAR |
| DK | POPLAR, YELLOW |
| AL | REDWOOD |
| HS | SAPELLI |
| HR | SIPO |
| DL | SOFTWOOD |
| CS | SPRUCE |
| FK | SPRUCE, EASTERN |
| BG | SPRUCE, ENGELMANN |
| CN | SPRUCE, SITKA |
| FL | SPRUCE, WESTERN WHITE |
| FX | SPRUCE-PINE-FIR |
| FM | SYCAMORE, AMERICAN |
| FN | TAMARACK |
| FH | TUPELO |
| AG | WALNUT |
| AZ | WALNUT, BLACK |
| FP | WILLOW |
| FQ | WILLOW, BLACK |
| Table 2 |
| Reply Code (AP02) | Reply |
| KT | 0A |
| KU | 0B |
| AB | 1 AND 2 CLEAR |
| AC | 1 COMMON |
| AS | 2 COMMON |
| KV | 3 A |
| KW | 3 B |
| BH | 3 COMMON |
| BJ | 3A COMMON |
| BK | 3B COMMON |
| BR | 4 COMMON |
| BS | 5 COMMON |
| BW | A |
| BX | A BEVEL SIDING |
| KK | A CEE |
| BY | A FINISH |
| BZ | APPEARANCE |
| CA | B |
| CB | B AND BETTER |
| CC | B AND BETTER DROP SIDING |
| CD | B AND BETTER FINISH |
| CE | B AND BETTER FLOORING |
| CF | B AND BETTER INDUSTRIAL CLEARS |
| CG | B BEVEL SIDING |
| KL | B CEE |
| CH | B FINISH |
| CJ | BARGE FRAMING |
| CK | BARGE PLANKING AND DECKING |
| CL | C |
| CM | C AND BETTER |
| CP | C AND BETTER FINISH |
| CN | C AND BETTER FLOORING |
| CQ | C AND BETTER INDUSTRIAL CLEARS |
| CR | C AND BETTER SELECT |
| JQ | C AND BETTER SIDING |
| CS | C AND BETTER V.G. STEPPING |
| KM | C CEE |
| CT | C DROP SIDING |
| CW | C FINISH |
| CX | C FLOORING |
| CY | C INDUSTRIAL |
| CZ | C SELECT |
| DA | C SHIP DECKING |
| JR | C STEPPING |
| KN | CABINET WORK |
| KQ | CARPENTER |
| DB | CHOICE |
| DC | CLEAR |
| DD | CLEAR ALL HEART |
| DE | CLEAR ALL HEART SIDING |
| DF | CLEAR HEART |
| DG | CLEAR HEART STRUCTURAL |
| DH | CLEAR SIDING |
| DJ | CLEAR STRUCTURAL |
| DK | CLEAR V.G. HEART BEVEL SIDING |
| DL | COLONIAL |
| DM | COMMERCIAL DECKING |
| JS | COMMON DIMENSION |
| DN | CONSTRUCTION |
| DP | CONSTRUCTION COMMON |
| DQ | CONSTRUCTION HEART |
| DR | D |
| DS | D DROP SIDING |
| DT | D FINISH |
| DW | D FLOORING |
| DX | D INDUSTRIAL CLEARS |
| DY | D SELECT |
| DZ | D V.G. STEPPING |
| EA | DENSE INDUSTRIAL 65 SCAFFOLD PLANK |
| EB | DENSE INDUSTRIAL 72 SCAFFOLD PLANK |
| JT | DENSE PREMIUM SCAFFOLD PLANK |
| JW | DENSE SELECT STRUCTURAL |
| EC | DENSE STRUCTURAL 65 |
| ED | DENSE STRUCTURAL 72 |
| KJ | DENSE STRUCTURAL 86 |
| EF | E |
| EG | ECONOMY |
| KR | EXCEPTIONAL CHOISE |
| EH | FACTORY SELECT |
| EJ | FINISH |
| EK | FIRST |
| EL | FIRSTS |
| EM | FOUNDATION |
| KS | FOURTH |
| JZ | GRADE B |
| KA | GRADE C |
| JX | GRADE I |
| JY | GRADE II |
| ET | INDUSTRIAL |
| EW | INDUSTRIAL 65 |
| EX | INDUSTRIAL 72 |
| EY | INDUSTRIAL 86 |
| EZ | INDUSTRIAL CLEAR ALL HEART |
| FA | INDUSTRIAL FACTORY SELECT |
| KP | JOINERY |
| FD | KNOTTY |
| FE | LATH |
| FF | MARGIN PLANK |
| FG | MERCHANTABLE |
| FH | MOULDINGS |
| AD | NO. 1 |
| AE | NO. 1 BOARDS |
| AF | NO. 1 CONSTRUCTION BOARDS |
| AG | NO. 1 CUTS |
| JM | NO. 1 DENSE SR |
| AH | NO. 1 DROP SIDING |
| AJ | NO. 1 FACTORY |
| AK | NO. 1 LATH |
| AM | NO. 1 SHOP |
| AN | NO. 1 SR TIMBERS |
| AP | NO. 1 STADIUM GRADE |
| AQ | NO. 1 STRUCTURAL |
| AR | NO. 1 TIMBERS |
| AT | NO. 2 |
| AW | NO. 2 BOARDS |
| AX | NO. 2 CONSTRUCTION BOARDS |
| JN | NO. 2 DIMENSION |
| AY | NO. 2 DROP SIDING |
| AZ | NO. 2 FLOORING |
| BA | NO. 2 FOUNDATION GRADE |
| AL | NO. 2 LATH |
| BB | NO. 2 SHOP |
| BC | NO. 2 SR TIMBERS |
| BD | NO. 2 STRUCTURAL |
| BE | NO. 2 TIMBERS |
| BL | NO. 3 |
| BM | NO. 3 BOARDS |
| BN | NO. 3 CONSTRUCTION BOARDS |
| BP | NO. 3 SHOP |
| BQ | NO. 3 TIMBERS |
| JP | NO. 4 BOARDS |
| FJ | PREMIUM |
| FK | PREMIUM SCAFFOLD PLANK |
| FL | PRIME FINISH |
| FM | QUALITY |
| FN | SCAFFOLD NO. 1 |
| FP | SCAFFOLD NO. 2 |
| FQ | SECOND |
| KB | SECOND AND BETTER |
| FR | SECONDS |
| FS | SELECT |
| KC | SELECT CAR STOCK |
| FT | SELECT DECKING |
| FW | SELECT HEART |
| FX | SELECT MERCHANTABLE |
| FY | SELECT SHOP |
| FZ | SELECT STRUCTURAL |
| GA | SELECT STRUCTURAL SCAFFOLD PLANK |
| GB | SELECTED DECKING |
| BF | SELECTED NO. 2 COMMON |
| BG | SELECTED NO. 3 COMMON |
| GC | SELECTS |
| GD | SHEATHING |
| GE | SHIP DECKING |
| GF | SHIP PLANKING |
| KD | SOUND SQUARE EDGE |
| GG | SOUND WORMY |
| GJ | STADIUM PLANK SEATS |
| GK | STADIUM PLANK WALK BOARDS |
| GH | STADIUM PLANKS |
| GL | STADIUM SEAT STOCK |
| GM | STANDARD |
| KE | STANDARD MOULDINGS |
| GN | STERLING |
| GP | STUD |
| GQ | SUPERIOR |
| KF | SUPERIOR FINISH |
| GR | SUPREME |
| GS | TANK |
| GT | TANK STOCK |
| GW | TANK STOCK 2 IN. TO 3 IN. |
| GX | TANK STOCK 4 IN. AND THICKER |
| HA | TANK STOCK UNDER 4 IN. |
| GY | THIRD |
| GZ | TRUSS |
| KG | UNGRADED |
| HB | UTILITY |
| KH | VEHICLE NUMBER |
| Table 3 |
| Reply Code (AP03) | Reply |
| AT | ASSOCIATION FRANCAISE DE NORMALISATION |
| AC | MAPLE FLOORING MANUFACTURERS ASSOCIATION |
| AD | NATIONAL HARDWOOD LUMBER ASSOCIATION |
| AR | NATIONAL LUMBER GRADES AUTHORITY, CANADA |
| AF | NATIONAL OAK FLOORING MANUFACTURERS ASSOCIATION |
| AG | NORTHEASTERN LUMBER MANUFACTURERS ASSOCIATION |
| AH | NORTHERN HARDWOOD AND PINE MANUFACTURERS ASSOCIATION |
| AJ | REDWOOD INSPECTION SERVICE |
| AL | SOUTHERN PINE INSPECTION BUREAU |
| AS | UNRECOGNIZED |
| AM | WEST COAST LUMBER INSPECTION BUREAU |
| AB | WESTERN WOOD PRODUCTS ASSOCIATION |
IF STYLE/REPLY CODE(s) RN WERE ENTERED FOR MRC CSHP, YOU MUST ANSWER MRC (CSHB)
CSHP*JTHICKNESS-LOCATION AND MEASURING METHOD
A MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH,ITS LOCATION ON THE ITEM,AND THE MEASURING METHOD USED.
Enter the applicable Reply Code from Tables 1 & 2 & 3 & 4 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CSHPJACAADSD2.0*;CSHPJACAADSD2.0$$JACAADSD2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN73) | Reply |
| BED | BUTT END |
| AAD | OVERALL |
| TED | TAPERED END |
| Table 4 |
| Reply Code (AN68) | Reply |
| RN | RANDOM |
| SD | SPECIFIED |
CSHB*GRANDOM THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter clear text.
(CSHBGCLEARTEXT)
IF STYLE/REPLY CODE(s) RN WERE ENTERED FOR MRC CRPW, YOU MUST ANSWER MRC (CQKJ)
CRPW*JWIDTH-LOCATION AND MEASURING METHOD
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS,ITS LOCATION ON THE ITEM,AND THE MEASURING METHOD USED. PLEASE USE MRC CRXX WITH USE OF ISAC IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Tables 1 & 2 & 3 & 4 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRPWJAABEDRN2.0*;CRPWJAABEDRN2.0$$JAABEDRN2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN73) | Reply |
| BED | BUTT END |
| AAD | OVERALL |
| TED | TAPERED END |
| Table 4 |
| Reply Code (AN68) | Reply |
| RN | RANDOM |
| SD | SPECIFIED |
CQKJ*GRANDOM WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter clear text.
(CQKJGCLEARTEXT)
IF STYLE/REPLY CODE(s) RN WERE ENTERED FOR MRC CRXX, YOU MUST ANSWER MRC (CRJD)
CRXXJMEASURING METHOD AND LENGTH
THE MEANS USED AND THE MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRXXJACRN2.0*;CRXXJACRN2.0$$JACRN2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN68) | Reply |
| RN | RANDOM |
| SD | SPECIFIED |
CRJD*GRANDOM LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter clear text.
(CRJDGCLEARTEXT)
CRCLJMOISTURE CONTENT RETENTION PERCENTAGE
THE MOISTURE CONTENT RETAINED IN THE ITEM AFTER SEASONING,EXPRESSED IN PERCENT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRCLJB2.0*;CRCLJB2.0$$JB2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| B | MINIMUM |
| C | MAXIMUM |
CQHF*DMAXIMUM GRAIN SLOPE
INDICATES THE MAXMIUM SLOPE OF GRAIN IN RELATION TO THE LENGTH OF THE ITEM.
Enter the applicable reply code from the table below
(CQHFDAN)
| Table 1 |
| Reply Code (AP05) | Reply |
| AH | 1 IN 10 |
| AJ | 1 IN 11 |
| AK | 1 IN 12 |
| AL | 1 IN 13 |
| AM | 1 IN 14 |
| AN | 1 IN 15 |
| AP | 1 IN 16 |
| AQ | 1 IN 17 |
| AR | 1 IN 18 |
| AS | 1 IN 19 |
| AT | 1 IN 20 |
| AW | 1 IN 21 |
| AX | 1 IN 22 |
| AY | 1 IN 23 |
| AZ | 1 IN 24 |
| BA | 1 IN 25 |
| BB | 1 IN 26 |
| BC | 1 IN 27 |
| BD | 1 IN 28 |
| BE | 1 IN 29 |
| BF | 1 IN 30 |
| AB | 1 IN 4 |
| AC | 1 IN 5 |
| AD | 1 IN 6 |
| AE | 1 IN 7 |
| AF | 1 IN 8 |
| AG | 1 IN 9 |
CRYQ*DSURFACE CONDITION DEGREE
THE EXTENT OF SURFACE DRESSING OR ROUGHNESS OF THE ITEM.
Enter the applicable reply code from the table below
(CRYQDAT*;CRYQDAN$DBC*)
| Table 1 |
| Reply Code (AP06) | Reply |
| AC | CLEAN PEELED FULL LENGTH |
| BD | DROP SIDING PATTERN 105 FULL LENGTH |
| AB | DROP SIDING PATTERN 106 FULL LENGTH |
| AD | POLISH SANDED ONE SIDE |
| AE | POLISH SANDED TWO SIDES |
| AF | REGULAR SANDED ONE SIDE |
| AG | REGULAR SANDED TWO SIDES |
| AJ | ROUGH PEELED FULL LENGTH |
| AK | ROUGH SANDED ONE SIDE |
| AL | ROUGH SANDED TWO SIDES |
| AH | ROUGH-UNSANDED FULL LENGTH |
| AM | SMOOTH SURFACE AND PREFINISHED FULL LENGTH |
| AN | SMOOTH SURFACE WITHOUT FINISH FULL LENGTH |
| BA | SURFACED FOUR SIDES |
| BB | SURFACED FOUR SIDES AND CAULKING SEAM |
| AP | SURFACED ONE EDGE |
| AQ | SURFACED ONE SIDE |
| AR | SURFACED ONE SIDE AND ONE EDGE |
| AS | SURFACED ONE SIDE AND TWO EDGES |
| AT | SURFACED TWO EDGES |
| BE | SURFACED TWO SIDES |
| AX | SURFACED TWO SIDES AND CENTER MATCHED |
| BF | SURFACED TWO SIDES AND ONE EDGE |
| AY | SURFACED TWO SIDES AND SHIPLAP |
| AZ | SURFACED TWO SIDES AND STANDARD MATCHED |
| AW | SURFACED TWO SIDES, ONE EDGE AND NOSED ONE EDGE |
| BC | UNPEELED FULL LENGTH |
IF STYLE/REPLY CODE(s) EQ WERE ENTERED FOR MRC BMKY, YOU MUST ANSWER MRC (CQMP)
IF STYLE/REPLY CODE(s) ER OR HD WERE ENTERED FOR MRC BMKY, YOU MUST ANSWER MRC (CQMP and CSTZ)
BMKY*DTREATMENT TYPE
INDICATES THE TYPE OF TREATMENT PROVIDED.
Enter the applicable reply code from the table below
(BMKYDHF)
| Table 1 |
| Reply Code (AK89) | Reply |
| DB | FIRE RETARDANT |
| EN | FIRE RETARDANT, MIL-L-19140 |
| HF | FUNGICIDAL |
| HG | INSERT REPELLANT |
| DF | MARINE BORER RESISTANT |
| EQ | PRESERVATIVE, MIL-C-12436 |
| EP | PRESERVATIVE, MIL-P-19550 |
| ER | PRESERVATIVE, TT-W-571 |
| HD | PRESERVATIVE, TT-W-572 |
| DQ | WATER REPELLENT |
CQMP*DPRESERVATIVE SOLUTION TYPE
INDICATES THE TYPE OF SOLUTION USED TO PRESERVE THE ITEM.
Enter the applicable reply code from the table below
(CQMPDGS*;CQMPDFH$DFD*)
| Table 1 |
| Reply Code (AK89) | Reply |
| EY | ACID COPPER CHROMATE |
| EZ | AMMONIACAL COPPER ARSENITE |
| GS | CHROMATED COPPER ARSENATE, TYPE I, II OR III |
| FD | CHROMATED ZINC CHLORIDE |
| CM | COAL-TAR CREOSOTE |
| HA | COPPER NAPHTHENATE |
| HB | COPPER NAPHTHENATE HIGH CONCENTRATION |
| GZ | COPPER-8-QUINOLINOLATE |
| CS | CREOSOTE COAL-TAR SOLUTION |
| CX | CREOSOTE PETROLEUM SOLUTION |
| HC | CREOSOTE/PENTACHLOROPHENOL |
| GT | DUAL TREATMENT |
| GW | FLUOR-CHROME-ARSENATE-PHENOL, TYPE I OR TYPE II |
| DH | PENTACHLOROPHENOL |
| FH | PENTACHLOROPHENOL IN HEAVY PETROLEUM SOLVENT |
| FJ | PENTACHLOROPHENOL IN LIGHT PETROLEUM SOLVENT |
| GX | PENTACHLOROPHENOL IN VOLATILE SOLVENT |
| GY | TRIBUTYLTIN OXIDE |
CSTZ*DSERVICE USAGE
THE APPLICATION FOR WHICH THE ITEM IS INTENDED.
Enter the applicable reply code from the table below
(CSTZDBB*;CSTZDAL$DAY*;CSTZDAL$$DAY*)
| Table 1 |
| Reply Code (AN66) | Reply |
| AB | BUILDING |
| AQ | BUILDING FOUNDATION |
| AC | CONTACT W/GROUND |
| AD | FENCE |
| BB | FOR USE ABOVE GROUND |
| BA | IMPORTANT STRUCTURAL MEMBERS IN CONTACT WITH GROUND OR FRESH WATER |
| AE | IMPORTANT STRUCTURAL MEMBERS NOT IN CONTACT W/GROUND OR WATER |
| AF | IN COASTAL WATERS |
| AR | IN CONTACT WITH OR CLOSE PROXIMITY TO FOODSTUFF |
| AG | IN FRESH WATER |
| AS | LUMBER |
| AT | PILES |
| AW | POLES |
| AX | POSTS |
| AY | READY-TO-USE SOLUTIONS BY SIMPLE NONPRESSURE METHODS |
| AL | TIES |
| AZ | TIMBERS |
| AN | UTILITY |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| ML | MATERIAL |
| MH | MESH |
| ME | METHOD |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCM2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAN*;BBRGDBD$DAM*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AH | OPEN SHED |
| BD | OPEN STORAGE |
| AJ | UNHEATED WAREHOUSE |
BBRH*JINSPECTION FREQUENCY
THE SPECIFIED TIME INTERVAL,FROM RECEIPT,NECESSARY TO DETECT MATERIAL DETERIORATION THAT WILL AFFECT STOCK READINESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(BBRHJDYAB2*;BBRHJDYAB2$$JDYAB3*)
| Table 1 |
| Reply Code (AH68) | Reply |
| DY | DAYS |
| MH | MONTHS |
| Table 2 |
| Reply Code (AM82) | Reply |
| AB | FIRST INSPECTION |
| AC | REINSPECTION |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJFM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CQCT*DPRIMARY CONTAINER TYPE
INDICATES THE TYPE OF CONTAINER/S/ OR SUPPORTING DEVICE/S/ WHICH IS IN DIRECT CONTACT WITH THE ITEM.
Enter the applicable reply code from the table below
(CQCTDA)
| Table 1 |
| Reply Code (AN65) | Reply |
| A | ANY ACCEPTABLE |
| ACD | BOX |
| AFA | CRATE |
| AFB | SKID |
CRLK*JPRIMARY CONTAINER CONTENT QUANTITY
A NUMERIC VALUE OF THE VOLUME,FORM,OR DOSAGE WITHIN EACH PRIMARY CONTAINER.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRLKJEA2.0*)
| Table 1 |
| Reply Code (AN64) | Reply |
| EA | EACH |
| SH | SHEET |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(ZZZPJ81A37-30624A*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information