A device whose measurable physical properties change with variation in temperature. The temperature reading appears in either degrees Celsius or degrees Fahrenheit on a self-indicating digital display. The device operates in conjunction with thermocouples and is powered by an electric current. Excludes:INDICATOR, TEMPERATURE, THERMOCOUPLE.
expandFSC Information
6685Pressure, Temperature, and Humidity Measuring and Controlling Instruments
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
ISAC Reply 3AEB added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3DES added to MRC MATT.
ISAC Reply 3DET added to MRC MATT.
ISAC Reply 3DEU added to MRC MATT.
ISAC Reply 3DEX added to MRC MATT.
ISAC Reply 3DEZ added to MRC MATT.
ISAC Reply 3DFA added to MRC MATT.
ISAC Reply 3DFB added to MRC MATT.
ISAC Reply 3DFC added to MRC MATT.
ISAC Reply 3DFE added to MRC MATT.
ISAC Reply 3DFF added to MRC MATT.
ISAC Reply 3DFG added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1C deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 1E deleted from MRC MATT.
ISAC Reply 1F deleted from MRC MATT.
ISAC Reply 1G deleted from MRC MATT.
ISAC Reply 1H deleted from MRC MATT.
ISAC Reply 1J deleted from MRC MATT.
ISAC Reply 1K deleted from MRC MATT.
ISAC Reply 1L deleted from MRC MATT.
ISAC Reply 1M deleted from MRC MATT.
ISAC Reply 1N deleted from MRC MATT.
ISAC Reply 1P deleted from MRC MATT.
ISAC Reply 1R deleted from MRC MATT.
ISAC Reply 1S deleted from MRC MATT.
ISAC Reply 1T deleted from MRC MATT.
ISAC Reply 1Z deleted from MRC MATT.
ISAC Reply 3AEB added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3DES added to MRC MDCL.
ISAC Reply 3DET added to MRC MDCL.
ISAC Reply 3DEU added to MRC MDCL.
ISAC Reply 3DEX added to MRC MDCL.
ISAC Reply 3DEZ added to MRC MDCL.
ISAC Reply 3DFA added to MRC MDCL.
ISAC Reply 3DFB added to MRC MDCL.
ISAC Reply 3DFC added to MRC MDCL.
ISAC Reply 3DFE added to MRC MDCL.
ISAC Reply 3DFF added to MRC MDCL.
ISAC Reply 3DFG added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 1A deleted from MRC MDCL.
ISAC Reply 1B deleted from MRC MDCL.
ISAC Reply 1C deleted from MRC MDCL.
ISAC Reply 1D deleted from MRC MDCL.
ISAC Reply 1E deleted from MRC MDCL.
ISAC Reply 1F deleted from MRC MDCL.
ISAC Reply 1G deleted from MRC MDCL.
ISAC Reply 1H deleted from MRC MDCL.
ISAC Reply 1J deleted from MRC MDCL.
ISAC Reply 1K deleted from MRC MDCL.
ISAC Reply 1L deleted from MRC MDCL.
ISAC Reply 1M deleted from MRC MDCL.
ISAC Reply 1N deleted from MRC MDCL.
ISAC Reply 1P deleted from MRC MDCL.
ISAC Reply 1R deleted from MRC MDCL.
ISAC Reply 1S deleted from MRC MDCL.
ISAC Reply 1T deleted from MRC MDCL.
ISAC Reply 1Z deleted from MRC MDCL.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 1A deleted from MRC SFTT.
ISAC Reply 1B deleted from MRC SFTT.
ISAC Reply 1C deleted from MRC SFTT.
ISAC Reply 1D deleted from MRC SFTT.
ISAC Reply 1E deleted from MRC SFTT.
ISAC Reply 1F deleted from MRC SFTT.
ISAC Reply 1G deleted from MRC SFTT.
ISAC Reply 1H deleted from MRC SFTT.
ISAC Reply 1J deleted from MRC SFTT.
ISAC Reply 1K deleted from MRC SFTT.
ISAC Reply 1L deleted from MRC SFTT.
ISAC Reply 1M deleted from MRC SFTT.
ISAC Reply 1N deleted from MRC SFTT.
ISAC Reply 1P deleted from MRC SFTT.
ISAC Reply 1R deleted from MRC SFTT.
ISAC Reply 1S deleted from MRC SFTT.
ISAC Reply 1T deleted from MRC SFTT.
ISAC Reply 1Z deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 1A deleted from MRC STDC.
ISAC Reply 1B deleted from MRC STDC.
ISAC Reply 1C deleted from MRC STDC.
ISAC Reply 1D deleted from MRC STDC.
ISAC Reply 1E deleted from MRC STDC.
ISAC Reply 1F deleted from MRC STDC.
ISAC Reply 1G deleted from MRC STDC.
ISAC Reply 1H deleted from MRC STDC.
ISAC Reply 1J deleted from MRC STDC.
ISAC Reply 1K deleted from MRC STDC.
ISAC Reply 1L deleted from MRC STDC.
ISAC Reply 1M deleted from MRC STDC.
ISAC Reply 1N deleted from MRC STDC.
ISAC Reply 1P deleted from MRC STDC.
ISAC Reply 1R deleted from MRC STDC.
ISAC Reply 1S deleted from MRC STDC.
ISAC Reply 1T deleted from MRC STDC.
ISAC Reply 1Z deleted from MRC STDC.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED33257*)
BFHZDMEASUREMENT TYPE
INDICATES THE TYPE OF MEASUREMENT PROVIDED.
Enter the applicable reply code from the table below
(BFHZDCE)
Table 1
Reply Code (AJ52)Reply
CABRIDGE CIRCUIT
CYDIGITAL
EYELECTROLYTIC
CBELECTRONIC CIRCUIT
CDMILLIVOLT CIRCUIT
CCMOVING COIL RATIOMETER
CEPOTENTIOMETER CIRCUIT
EZSENSITIZED ACTUATING ELEMENT
CFTHERMOELECTRICAL CIRCUIT
CGWHEATSTONE BRIDGE CIRCUIT
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3DFCDHRE000*;MATT3DFCDHRE000$DST1020*;MATT3DFCDHRE000$$DST1020*)
Table 1
ISAC Field Indicator (5000)Location
3AEBCARRYING CASE
3AEEOVERALL
3DESMETER CASE
3DETBULB
3DEUPROTECTIVE TUBE
3DEXOUTER JACKET INSULATION/SHEATHING
3DEZDIAL FACE
3DFATHERMOCOUPLE WELL
3DFBCASE HOLDER
3DFCSTEM LIQUID IN GLASS
3DFECAPILLARY TUBE
3DFFTHERMOCOUPLE WIRE
3DFGPIERCING POINT
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
AL2017ALUMINUM ALLOY 2017
AL2024ALUMINUM ALLOY 2024
AL0308ALUMINUM ALLOY 308.0
AL0045ALUMINUM ALLOY 355.0
AL5083ALUMINUM ALLOY 5083
AL6061ALUMINUM ALLOY 6061
AL6062ALUMINUM ALLOY 6062
AL0129ALUMINUM ALLOY B380.0
ASA000ASBESTOS
BRA000BRASS
CSA000CELLULOSE
CXA000CEMENT
CLD000CERAMIC
CLF000CERAMIC ALUMINA (USE ALUMINUM OXIDE)
CRA000CHROMIUM
CUA000COPPER
CUB000COPPER ALLOY
CU0074COPPER ALLOY 230
CU0076COPPER ALLOY 240
CU0079COPPER ALLOY 260
CU0080COPPER ALLOY 268
CU0088COPPER ALLOY 342
CU0089COPPER ALLOY 353
CU0099COPPER ALLOY 464
CU0715COPPER ALLOY 715
CUF000COPPER CAST
CKA000CORK
CCA000COTTON
FG0000FIBERGLASS
GSA000GLASS
GSN000GLASS LAMINATE
GSJ000GLASS OPTICAL
HRE000HAIR
FEA000IRON
FED000IRON CAST ALLOY
FEC000IRON MALLEABLE
LRA000LEATHER
LRE000LEATHER ARTIFICIAL
MGB000MAGNESIUM ALLOY
AYA000MICA
NLA000NICKEL
NLB000NICKEL ALLOY
NL0009NICKEL ALLOY 600
NL0059NICKEL ALLOY 800
NL0018NICKEL ALLOY K-500
NL0017NICKEL ALLOY R-405
PPA000PAPER
PCA000PLASTIC
PCD000PLASTIC ACRYLIC
PCAN00PLASTIC CELLULOSE ACETATE
PCJ000PLASTIC MELAMINE
PCN000PLASTIC PHENOLIC
PCP000PLASTIC POLYAMIDE (NYLON)
PCAJ00PLASTIC POLYVINYL CHLORIDE (PVC)
PCAW00PLASTIC TETRAFLUOROETHYLENE
PCAAA0PLASTIC VINYL ACETATE
PTA000PLATINUM
CLB000PORCELAIN
RHA000RHODIUM
RCA000RUBBER NATURAL
RC0001RUBBER POLYACRYLATE CLASS ACM
RC0003RUBBER POLYESTER URETHANE CLASS AU
RCL000RUBBER POLYETHYLENE
RC0021RUBBER SILICONE CLASS Q
RCB000RUBBER SYNTHETIC
STA000STEEL
ST1005STEEL COMP 1005
ST1006STEEL COMP 1006
ST1008STEEL COMP 1008
ST1009STEEL COMP 1009
ST1010STEEL COMP 1010
ST1011STEEL COMP 1011
ST1012STEEL COMP 1012
ST1013STEEL COMP 1013
ST1015STEEL COMP 1015
ST1016STEEL COMP 1016
ST1017STEEL COMP 1017
ST1018STEEL COMP 1018
ST1019STEEL COMP 1019
ST1020STEEL COMP 1020
ST1022STEEL COMP 1022
ST1024STEEL COMP 1024
ST1045STEEL COMP 1045
ST1050STEEL COMP 1050
ST1055STEEL COMP 1055
ST1060STEEL COMP 1060
ST1065STEEL COMP 1065
ST1070STEEL COMP 1070
ST1074STEEL COMP 1074
ST1075STEEL COMP 1075
ST1085STEEL COMP 1085
ST1090STEEL COMP 1090
ST1095STEEL COMP 1095
ST1212STEEL COMP 1212
ST0301STEEL COMP 301
ST0302STEEL COMP 302
ST0303STEEL COMP 303
ST0304STEEL COMP 304
ST0080STEEL COMP 304L
ST0305STEEL COMP 305
ST0316STEEL COMP 316
ST0082STEEL COMP 316L
ST0321STEEL COMP 321
ST0347STEEL COMP 347
ST0403STEEL COMP 403
ST4130STEEL COMP 4130
ST0090STEEL COMP 4130H
ST0099STEEL COMP 416SE
ST0430STEEL COMP 430
ST0601STEEL COMP 601
ST0631STEEL COMP 631
ST1093STEEL COMP E3316
STB000STEEL CORROSION RESISTING
WDC000WOOD
ZNB000ZINC
ZNA000ZINC ALLOY
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
Table 1
ISAC Field Indicator (5000)Location
3AEBCARRYING CASE
3AEEOVERALL
3DESMETER CASE
3DETBULB
3DEUPROTECTIVE TUBE
3DEXOUTER JACKET INSULATION/SHEATHING
3DEZDIAL FACE
3DFATHERMOCOUPLE WELL
3DFBCASE HOLDER
3DFCSTEM LIQUID IN GLASS
3DFECAPILLARY TUBE
3DFFTHERMOCOUPLE WIRE
3DFGPIERCING POINT
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AP33)Reply
QAEROSPACE MATERIAL SPEC STD
JAMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 3
Reply Code (AP18)Reply
M10TH MATERIAL RESPONSE
N11TH MATERIAL RESPONSE
P12TH MATERIAL RESPONSE
Q13TH MATERIAL RESPONSE
R14TH MATERIAL RESPONSE
S15TH MATERIAL RESPONSE
T16TH MATERIAL RESPONSE
U17TH MATERIAL RESPONSE
W18TH MATERIAL RESPONSE
X19TH MATERIAL RESPONSE
B1ST MATERIAL RESPONSE
Y20TH MATERIAL RESPONSE
Z21ST MATERIAL RESPONSE
V22ND MATERIAL RESPONSE
C2ND MATERIAL RESPONSE
D3RD MATERIAL RESPONSE
E4TH MATERIAL RESPONSE
F5TH MATERIAL RESPONSE
H6TH MATERIAL RESPONSE
J7TH MATERIAL RESPONSE
K8TH MATERIAL RESPONSE
L9TH MATERIAL RESPONSE
GALL MATERIAL RESPONSES
ASINGLE MATERIAL RESPONSE
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDLQA000*;SFTT3AEEDLQA000$DPND000*;SFTT3AEEDLQA000$$DPND000*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (SF01)Reply
ANA000ANODIZE
CDA000CADMIUM
CMA000CHROMATE
CMC000CHROMATE MAGNESIUM
CMB000CHROMATE ZINC
CRA000CHROMIUM
CUA000COPPER
CUB000COPPER ALLOY
DCA000DICHROMATE
ENA000ENAMEL
AUA000GOLD
LQA000LACQUER
NLA000NICKEL
NLC000NICKEL ALLOY
XXB000OXIDE
XXA000OXIDE FILM
PNA000PAINT
PND000PAINT EPOXY
PSA000PASSIVATE
PHA000PHOSPHATE
PHC000PHOSPHATE MANGANESE
PCS000PLASTIC EPOXY
PRA000PRIMER
RSA000RESIN SILICONE
RSB000RESIN SYNTHETIC
SNA000TIN
VAA000VARNISH
ZNA000ZINC
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AP33)Reply
GASSN STD
ACOMMERCIAL ITEM DESCRIPTION
KDEF STAN/SPEC
BFED SPEC
CFED STD
LGOVERNMENT STD/SPEC
NINTERNATIONAL STD/SPEC
FMFR REF
DMIL SPEC
EMIL STD
HNATIONAL SPEC
PNATIONAL STD
MNATIONAL STD/SPEC
Table 3
Reply Code (AP39)Reply
M10TH TREATMENT RESPONSE
N11TH TREATMENT RESPONSE
P12TH TREATMENT RESPONSE
Q13TH TREATMENT RESPONSE
R14TH TREATMENT RESPONSE
S15TH TREATMENT RESPONSE
B1ST TREATMENT RESPONSE
C2ND TREATMENT RESPONSE
D3RD TREATMENT RESPONSE
E4TH TREATMENT RESPONSE
F5TH TREATMENT RESPONSE
H6TH TREATMENT RESPONSE
J7TH TREATMENT RESPONSE
K8TH TREATMENT RESPONSE
L9TH TREATMENT RESPONSE
GALL TREATMENT RESPONSES
ASINGLE TREATMENT RESPONSE
IF STYLE/REPLY CODE(s) H1, H2, H3, H4 OR H5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK and ABHP and ABKW)
IF STYLE/REPLY CODE(s) H6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABMK and ABFY)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLH3)
Table 1
Physical Drawing IDReply Code (STYL)Reply
AAF1262H1PORTABLE
AAF1263H2PORTABLE, SELECTOR SWITCH
AAF1264H3PORTABLE, RECHARGEABLE, BATTERY
AAF1265H4PORTABLE, BENCH
AAF1266H5PANEL MOUNTED
AAF1267H6HAND HELD
DR00032H7OVAL LIQUID CRYSTAL DISPLAY
DR00033H8STRIP LIQUID CRYSTAL DISPLAY
ABFY*JOVERALL DEPTH
AN OVERALL MEASUREMENT BETWEEN SPECIFIED POINTS OF AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABFYJAB2.0*;ABFYJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAA2.0*;ABHPJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ASXH*JVOLTAGE RATING IN VOLTS
THE VOLTAGE RATING AT WHICH THE ITEM IS DESIGNED TO OPERATE,EXPRESSED IN VOLTS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASXHJCC2.0*;ASXHJCC2.0$$JCC2.1*)
Table 1
Reply Code (AB62)Reply
BAC
CDC
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
FREQ*BFREQUENCY IN HERTZ
THE CYCLES PER SECOND /HERTZ/ OF THE ALTERNATING CURRENT.
Enter a reply with a minimum of one digit on either side of the decimal point.
(FREQB2.0)
FAAZ*DPHASE
THE NUMBER OF ALTERNATING CURRENT PHASES.
Enter the applicable reply code from the table below
(FAAZDB)
Table 1
Reply Code (AD02)Reply
ASINGLE
CTHREE
BTWO
AFGAJOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJFM32.0/P50.0*)
Table 1
Reply Code (AB36)Reply
CCELSIUS
FFAHRENHEIT
BFQNDDISPLAY TYPE
INDICATES THE TYPE OF DISPLAY PROVIDED.
Enter the applicable reply code from the table below
(BFQNDFLK)
Table 1
Reply Code (AK54)Reply
FJWLIGHT EMITTING DIODE (L.E.D.).
FJXLIQUID CRYSTAL
FLKTHERMISTOR
BFQPADISPLAY DIGIT QUANTITY
THE NUMBER OF DIGITS DISPLAYED.
Enter the alpha-numeric reply with a minimum of one character.
(BFQPAP7)
BHMWJMEASUREMENT RANGE
THE MINIMUM TO MAXIMUM VALUE WHICH THE ITEM IS CAPABLE OF MEASURING.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(BHMWJBNM32.0/P50.0*;BHMWJBNM32.0/P50.0$$JBN*)
Table 1
Reply Code (AJ20)Reply
BMDEG CELSIUS
BNDEG FAHRENHEIT
MDPERCENT RELATIVE HUMIDITY
BGJNJSWITCH TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF SWITCHES PROVIDED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(BGJNJAG2*;BGJNJAG2$$JAG3*)
Table 1
Reply Code (AC82)Reply
CPPUSH BUTTON
ADROTARY
AGTOGGLE
IF STYLE/REPLY CODE(s) ACS, AET, AFA, AHF, ATJ, ATK, ATL, ATM OR ATN WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (AKEJ and CRYY)
IF STYLE/REPLY CODE(s) ACQ WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (AEBV)
IF STYLE/REPLY CODE(s) ABY WERE ENTERED FOR MRC AXHR, YOU MUST ANSWER MRC (ABTD)
AXHR*JMOUNTING FACILITY TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF FACILITIES BY WHICH THE ITEM IS MOUNTED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(AXHRJBHB2*;AXHRJBHB2$$JBHB3*;AXHRJBHB2$JBHB2*)
Table 1
Reply Code (AM39)Reply
BWDADJUSTABLE
AWGADJUSTABLE ANGLE
BWEADJUSTABLE BACK
AWJBACK ANGLE
AQPBACKPLATE
ABBBASE
ADGBAYONET
AFEBAYONET LOCK
AACBOLT
AWKBOTTOM
AWLBOTTOM SWIVEL
ABCBRACKET
ABDBUSHING
ABFCASE
AWMCENTER BACK
ABHCLAMP
AFLCLIP
ARNCONNECTION
AWNCONVEX SHAPE
AWPDIAL 360 DEGREE ROTATION AND STEM 180 DEGREE ROTATION TO SUIT ANY LOCATION
ARPEXTERNAL NPTF CONNECTION
ARQEXTERNAL PIPE CONNECTION
ARSEXTERNAL STRAIGHT THREAD CONNECTION
AFTEXTERNAL THREAD
ACRFLANGE
AGQFLUSH
ACPHOLE
ASCINSERTED NUTS
AGMLOCKING BUSHING
AWRLOWER BACK
BWFMAGNET SURFACE
ASEMETAL CASE FIXED
ASFMETAL CASE FLANGE
ASGMETAL CASE RUBBER WASHER
ASHMETAL CASE SEPARABLE SOCKET
AEDPANEL
ASLPEDESTAL
ASNPIN CLIP
ASPPIPE FITTING
ASQPLASTIC CASE FIXED
AEEPLATE
ASTPORTABLE METAL CASE
ASXPORTABLE WOOD BACK
BHBRIGID
ASZRIGID STEM
ATARUBBER BUSHING
AQYSEMIFLUSH
ARMSHOCKPROOF CASE
ABYSLOT
BCXSLOTTED HOLE
BPZSOCKET STEM
AWSSTRAIGHT
AWTSTRAIGHT BOTTOM
AWXSTRAIGHT PARALLEL TO DIAL FACE
AWYSTRAIGHT STEM
AAESTUD
AEGSURFACE
ACSTHREAD
AFATHREADED BUSHING
AHFTHREADED HOLE
ATJTHREADED MALE CONNECTION
ATKTHREADED NECK
ATLTHREADED PIPE CONNECTION
ATMTHREADED SOCKET
ATNTHREADED STEM
AETTHREADED STUD
ATPTOP HOOK
BWGTURRET CASE WITH FLUSH RING
BWHU-CLAMP
ATQUNION CONNECTION
ACQUNTHREADED HOLE
AEWUNTHREADED STUD
ATSWALL
AEJWALL BRACKET
ATTWALL FLANGE
AKKWELDED
BWJWOOD BACK, FIXED MOUNTING
AKEJ*DMOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF SCREW THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER ON THE MOUNTING FACILITY.
Enter the applicable reply code from the table below
(AKEJDBR)
Table 1
Reply Code (AH06)Reply
BSBSP.TR EXT
BRBSP.TR INT
SMISO M
SSISO S
NPNPT
UNUN
NCUNC
NEUNEF
NFUNF
NJUNIFIED NATIONAL FINE (UNJ)
JFUNIFIED NATIONAL JOINT FINE (UNJF)
JCUNJC
NMUNM
NSUNS
CRYY*JMOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A COAXIAL CYLINDER WHICH WOULD BOUND THE CREST OF AN EXTERNAL THREAD OR THE ROOT OF AN INTERNAL THREAD.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRYYJA2.0*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
CGGK*JMOUNTING THREAD QUANTITY
THE NUMBER OF MOUNTING THREADS ON THE ITEM MEASURED ON A LINE PARALLEL TO THE THREAD AXIS,INCLUDING INCOMPLETE THREADS.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CGGKJJ2.0*;CGGKJJ2.0$JJ2.1*)
Table 1
Reply Code (AB39)Reply
CPER INCH
JPER MILLIMETER
AEBV*JUNTHREADED MOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN UNTHREADED MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEBVJAC2.0*;AEBVJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ABTD*JMOUNTING SLOT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF THE MOUNTING SLOT,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTDJAB2.0*;ABTDJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
AFFL*JMOUNTING BOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFFLJAB2.0*;AFFLJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
BHMC*DCASE TYPE
INDICATES THE TYPE OF CASE PROVIDED.
Enter the applicable reply code from the table below
(BHMCDAGF*;BHMCDABG$$DABJ*)
Table 1
Reply Code (AJ95)Reply
AENBOX W/HANDLE
AFDCARRYING CASE W/HANDLE
ABGCORROSION RESISTANT
AGDCYLINDRICAL
AADDRIPPROOF
ABJDUST TIGHT
AAEDUSTPROOF
AEPDUSTPROOF W/LEATHER CARRYING STRAP
AAHEXPLOSION PROOF
AFEEXPLOSION PROOF W/CARRYING CASE
AERFUMEPROOF
AESFUMEPROOF W/HINGED DOOR
AETFUNGUSPROOF W/HINGED LID
AAKHERMETICALLY SEALED
AEWHINGED LID CARRYING CASE W/HANDLE
ABTMOISTURE PROOF
AEXMOISTURE PROOF W/HINGED DOOR
AGEOBLONG
AGFRECTANGULAR
AGGROUND
ACHSHOCK PROOF
ACGSHOCK RESISTANT
AEYSHOCKPROOF CASE W/HANDLE
AEZSPARKPROOF
AFASPARKPROOF W/TELESCOPE HOLDER
ACJSPLASH PROOF
AFBSPLASH PROOF W/HANDLE
AFCVAPORPROOF
ACRVIBRATION PROOF
AAYWATERPROOF
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDCCM*;CBBLDCCP$$DCDA*)
Table 1
Reply Code (AN47)Reply
BGAADAPTER
CBWADJUSTABLE TWO PRONG HOOK
ACYAMMETER
CBXCARRYING TUBE W/CLIP
CVKCHART PAPER
CBYCLIP W/RING
CBZCONNECTOR PIPE THREAD
CCACOPPER GASKET FOR ATTACHING TO 18MM SPARK PLUG
CCBCOPPER RIVET
CCCDOUBLE-BORE PORCELAIN INSULATOR
CCDDRY CELL BATTERY
CCEEXPANSION CHAMBER
CCFFLUORESCENT LAMP
BGPFUSE
BQNGASKET
CCGHOLDING CLAMP
CCHINCANDESCENT LAMP
CVLINK
CDAINK BOTTLE W/DROPPER
CCJINSTRUCTION MANUAL
CCKLENS MAGNIFYING FRONT
CCLMALE CONNECTOR
AAJMOUNTING HARDWARE
CCMNEOPRENE TUBING CUSHION
CVMPEN
CCNPERFORATED BULB GUARD
CCPPLUG CONNECTOR
CCQPLUG W/O RING
CCRPOTENTIOMETER
CCSPROTECTIVE COVER
CCTPROTECTIVE GLASS/PLASTIC
AXMRESET BUTTON
AYXRING
CCWTEMPERATURE COMPENSATOR
CCXWIRE WOUND RESISTOR
CCYZERO ADJUSTMENT
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDNR*;ENACDNZ$$DKW*)
Table 1
Reply Code (EN02)Reply
K6NON-MERCURY ALTERNATIVE - CONSUMER PRODUCTS - THERMOMETERS
KWNON-MERCURY ALTERNATIVE - MEDICAL PRODUCTS - THERMOMETERS
NZPLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT
NRREVIEWED - DOES NOT MEET SOME ENAC CRITERIA
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
AARG*DRELIABILITY INDICATOR
AN INDICATION THAT THE LEVEL OF PROBABILITY THAT AN ITEM WILL OPERATE WITHOUT FAILURE,AT A SPECIFIED RATED CAPABILITY,AT A SPECIFIED TEMPERATURE,AND FOR A SPECIFIED PERIOD OF TIME,HAS BEEN ESTABLISHED BY TESTING RANDOM SAMPLES OF PRODUCTION LOT.
Enter the applicable reply code from the table below
(AARGDN)
Table 1
Reply Code (AA61)Reply
EESTABLISHED
NNOT ESTABLISHED
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDIRA000*;PRMTDAZA000$DRHA000*;PRMTDAZA000$$DRHA000*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJAUA000F2.0*;PMWTJAUA000F2.0$JAUA000F2.0*;PMWTJAUA000F2.0$$JAUA000F2.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
Table 2
Reply Code (AG14)Reply
EGRAINS, TROY
RGRAMS
FOUNCES, TROY
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJAZA0002.0*;PMLCJAZA0002.0$JAZA0002.0*;PMLCJAZA0002.0$$JAZA0002.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
BHHS*GCHART IDENTIFYING NUMBER
THE NUMBER ASSIGNED BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE CHART.
Enter clear text.
(BHHSGCLEARTEXT)
BGKZ*GSCALE INSCRIPTION/BACKGROUND COLOR
THE HUE OR TINT OF THE INSCRIPTION(S) AND/OR THAT PORTION OF THE SCALE WHICH SURROUNDS THE INSCRIPTION ON THE SCALE.
Enter clear text.
(BGKZGCLEARTEXT)
BKCN*GSCALE ACCURACY RATING
THE AMOUNT OF ACCURACY FOR WHICH THE SCALE IS RATED.
Enter clear text.
(BKCNGCLEARTEXT)
AMNK*GSCALE CALIBRATION
AN INDICATION OF THE MANNER IN WHICH THE SCALE IS CALIBRATED.
Enter clear text.
(AMNKGCLEARTEXT)
AWAG*JSCALE SMALLEST INCREMENT
THE SMALLEST VALUE BETWEEN THE MARKINGS ON A SCALE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AWAGJGW2.0*;AWAGJGW2.0$$JGW2.1*)
Table 1
Reply Code (AG67)Reply
GTDEG CELSIUS
GWDEG FAHRENHEIT
KXMILLIVOLTS
FCLS*AFUNCTIONAL CLASSIFICATION
THE ALPHA-NUMERIC DESIGNATION THAT IDENTIFIES THE CLASSIFICATION OF THE ITEM ACCORDING TO THE CATEGORY OF FUNCTIONS PERFORMED.
Enter the alpha-numeric reply with a minimum of one character.
(FCLSAF5)
FTLD*GFUNCTIONAL DESCRIPTION
DESCRIBES THE CAPABILITIES,INTENDED USE,AND/OR PURPOSE FOR WHICH THE ITEM IS PROVIDED.
Enter the reply from the applicable document.
(FTLDGUSED TO INSTALL/REMOVE ENGINE NACELLE*)
TMDN*ATYPE/MODEL DESIGNATION
THE ALPHA-NUMERIC-ALPHA DESIGNATION USED TO IDENTIFY THE TYPE AND/OR MODEL OF THE BASIC ITEM.
Enter the alpha-numeric reply with a minimum of one character.
(TMDNAB4)
RTSE*GRELATIONSHIP TO SIMILAR EQUIPMENT
INDICATES THE RELATIONSHIP,SUCH AS CONSTRUCTION,CAPABILITIES,AND THE LIKE,OF THE ITEM TO A SIMILAR ITEM.
Enter concise statement for similar item including name and identifying data.
(RTSEGSIMILAR TO LOCKHEED OVERWING ENGINE HOIST P/N 61521-58*)
RDAL*GREFERENCE DATA AND LITERATURE
LITERATURE AND REFERENCES AVAILABLE FOR INFORMATION PERTAINING TO THE ITEM.
Enter data appropriate and in a concise manner to identify informational references covering the item.
(RDALGNAAVAIROIA/VFK58 A-2.2.9*)
NTRD*AENTRY DATE
INDICATES THE DATE THE ITEM WAS ENTERED INTO MIL-HDBK-300.
Enter the date structured in three hyphenated 2 position segments to indicate the last 2 digits of the calendar year, month, and day.
(NTRDA80-05-28*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)