A band or hoop made of rubber, chemicals, fabric and steel or other materials. May be solid, cushioned, reinforced or perforated, molded on a detachable rim or mounted on a wheel. Includes tires having zero pressure air chamber(s).
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED31968*)
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFZF)
| Table 1 |
| Reply Code (AN47) | Reply |
| FZF | FLAPS |
| FZG | NO FLAPS |
CZMHHSERVICE TYPE
INDICATES THE PRIMARY TYPE OF SERVICE FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable Reply Code from Tables 1 & 2 below.
(CZMHHACMW2.0*;CZMHHACMW2.0$HACMW2.1*)
| Table 1 |
| Reply Code (AN78) | Reply |
| AB | AGRICULTURAL |
| AG | AIRCRAFT |
| AR | ALL TERRAIN |
| CA | CARGO |
| CO | CONSTRUCTION |
| AH | CYCLE |
| AC | INDUSTRIAL |
| LA | LOAD |
| ME | MHE |
| AJ | MILITARY |
| AD | NUMERIC |
| AK | OFF THE ROAD |
| RD | ON/OFF ROAD |
| AL | OVER THE ROAD |
| AE | P-METRIC |
| AF | SERIES |
| Table 2 |
| Reply Code (AN79) | Reply |
| AM | AGRICULTURAL MACHINE |
| AV | ALL TERRAIN VEHICLE |
| AB | AMPHIBIOUS BARGE |
| AL | AMPHIBIOUS LIGHTER |
| AC | ARMORED CAR |
| AT | ARMORED TRUCK |
| BY | BICYCLE |
| BW | BOGEY WHEEL |
| BS | BUS |
| CP | COMPACTOR |
| CO | CONSTRUCTION |
| CR | CRANE |
| CC | CROSS-COUNTRY |
| DO | DOZER |
| DH | DRIVE WHEEL |
| EM | EARTHMOVER |
| FT | FARM TRACTOR |
| TD | FARM TRACTOR, DRIVING WHEEL |
| TF | FARM TRACTOR, STEERING WHEEL |
| FL | FORKLIFT |
| FE | FORKLIFT ELEVATOR |
| FR | FORKLIFT REGULAR |
| GT | GARDEN TRACTOR |
| GR | GRADER |
| GS | GROUND SUPPORT |
| GC | GUN CARRIAGE |
| HA | HEAVY WEIGHT AIRCRAFT |
| HC | HELICOPTER |
| PL | IMPLEMENT |
| LM | LANDING VEHICLE |
| LT | LIGHT TRUCK |
| LA | LIGHT WEIGHT AIRCRAFT |
| LR | LOADER |
| LD | LOADER DOZER |
| LE | LOADER DOZER EARTHMOVER |
| LG | LOADER GRADER |
| LO | LOADER SCOOP |
| LS | LOG-SKIDDER |
| PT | LOW PLATFORM TRAILER |
| MW | MAIN WHEEL |
| MH | MATERIAL HANDLING |
| MM | MEDIUM AND HEAVY MOTOR VEHICLE |
| MA | MEDIUM WEIGHT AIRCRAFT |
| MN | MINING |
| ML | MINING-LOGGING |
| CS | MOBILE CRANE-SHOVEL |
| MB | MOTORBICYCLE |
| MC | MOTORCYCLE |
| MS | MOTORSCOOTER |
| NA | NORMAL TAKE OFF/LANDING AIRCRAFT |
| NW | NOSE WHEEL |
| PC | PASSENGER CAR |
| PR | PERSONNEL CARRIER |
| PS | PLATFORM TRAILER |
| RE | REFUELER |
| RG | ROAD GRADER |
| SC | SCRAPER |
| SA | SHORT TAKE OFF/LANDING AIRCRAFT |
| SS | SKID-STEER LOADER SS-1 |
| SM | SMALL CUBIC CAPACITY MOTORCYCLE |
| SV | SPECIAL SERVICE |
| SR | SPECIAL TRAILER |
| SP | SPECIAL VEHICLE |
| SW | STEERING WHEEL |
| TW | TAIL WHEEL |
| TT | TOW TRACTOR |
| TS | TOW TRACTOR STEERING |
| TK | TRACTOR |
| DW | TRACTOR DRIVE WHEEL |
| TL | TRAILER |
| TB | TRUCK-BUS |
| UM | UNDERGROUND MINING |
| US | UNDERGROUND MINING STEERING |
| TR | UTILITY TRAILER |
| VE | VEHICLE |
| PA | VERTICAL TAKE OFF/LANDING AIRCRAFT |
| WH | WHEEL |
| WR | WRECKER |
DAAH*DITEM TYPE CATEGORY
THE CATEGORY THAT IDENTIFIES THE TYPE OF ITEM.
Enter the applicable reply code from the table below
(DAAHDAE*;DAAHDAC$DAF*;DAAHDAC$$DAF*)
| Table 1 |
| Reply Code (TC01) | Reply |
| AA | ACCESSORY |
| AD | INNER RIM |
| AC | ONE PIECE RIM |
| AE | OUTER RIM |
| AB | TIRE |
| AF | WHEEL ASSEMBLY |
DAAA*AWHEEL ASSEMBLY NATIONAL STOCK NUMBER
THE NATIONAL STOCK NUMBER THAT DESIGNATES THE WHEEL ASSEMBLY.
Enter the numeric reply with a minimum of one digit.
(DAAAA10*)
AAGC*DTREAD PATTERN
THE DESIGN MOLDED INTO THE TIRE TREAD RUBBER TO PROVIDE TRACTION.
Enter the applicable reply code from the table below
(AAGCDSO*;AAGCDDT$DPT*)
| Table 1 |
| Reply Code (AA30) | Reply |
| AQ | AGRICULTURAL TREAD, DRIVING AXLE |
| AR | AGRICULTURAL TREAD, NONDRIVING AXLE |
| AV | AIRCRAFT TREAD |
| BT | ALL POSITION |
| AB | ALL SEASON |
| BN | ALL SEASON/MUD-SNOW |
| BL | ALL SEASON/MUD-SNOW/LUG |
| BX | ALL TERRAIN |
| BC | ALL TERRAIN/CROSS COUNTRY |
| BW | ALL WEATHER |
| BD | ALL WEATHER CROSS COUNTRY |
| CC | CROSS COUNTRY |
| CA | CROSS COUNTRY ALL TERRAIN |
| CT | CROSS COUNTRY TRACTION |
| HU | CUSHION SOLID NONDIRECTIONAL TRACTION |
| GW | CUSHION SOLID SMOOTH |
| GV | CUSHION SOLID/RIBBED/GROOVED |
| DP | DEEP TREAD |
| DT | DESERT TREAD |
| DD | DIAMOND |
| AM | DIRECTIONAL OFF THE ROAD TREAD |
| BA | DIRECTIONAL RIBBED TREAD |
| DS | DIRECTIONAL TRACTION REGULAR |
| AX | DIRECTIONAL TREAD |
| DH | DRIVE AXLE HIGHWAY TRACTION TREAD |
| DW | DUAL TAPERED STEP LUG |
| AW | GRID |
| GD | GRIP DEEP |
| GE | GRIP EXTRA DEEP |
| GP | GRIP REGULAR |
| GU | GRIP TERRA H-2 |
| GT | GRIP TRACTION |
| GR | GROOVED |
| AU | GROOVED TREAD |
| GY | HELICOPTER GROOVED |
| GZ | HELICOPTER MAIN WHEEL GROOVED |
| GX | HELICOPTER SMOOTH |
| BS | HIGH SCRUB URBAN (ALL POSITION) NONDIRECTIONAL |
| HW | HIGHWAY ALL SEASON |
| HM | HIGHWAY MUD-SNOW |
| HL | HIGHWAY MUD-SNOW/LUG |
| HR | HIGHWAY REGULAR |
| HS | HIGHWAY REGULAR RIBBED |
| AC | HIGHWAY TREAD |
| AG | HIGHWAY TREAD, DRIVING AXLE |
| AF | HIGHWAY TREAD, NONDRIVING AXLE |
| KN | KNOBBED |
| KT | KNOBBED DRIVE AXLE LUG |
| AE | KNOBBED MUD AND SNOW TREAD |
| AT | LUG TREAD |
| GS | MAIN WHEEL GROOVED |
| AK | MILITARY TREAD, CROSS COUNTRY |
| AJ | MILITARY TREAD, DESERT |
| AH | MILITARY TREAD, NONDIRECTIONAL MUD AND SNOW |
| AD | MUD AND SNOW TREAD |
| BE | NON DIRECTIONAL CROSS COUNTRY |
| BF | NON DIRECTIONAL HIGHWAY TREAD |
| BG | NON DIRECTIONAL TRACTION NON SKID |
| BI | NON DIRECTIONAL TRACTION REGULAR |
| BJ | NON DIRECTIONAL TRACTION VUT |
| BK | NON DIRECTIONAL TYPE 2 STYLE 5 |
| BO | NON DIRECTIONAL XGLA2 L2 ASTERISK TG |
| AN | NONDIRECTIONAL OFF THE ROAD TREAD |
| AY | NONDIRECTIONAL TREAD |
| BM | NON-DIRECTIONAL, G2 |
| HZ | NOSE WHEEL GROOVED |
| PT | PLOW TAIL |
| RT | REGIONAL SERVICE ALL POSITION |
| AZ | REGULAR NONSKID TREAD |
| RB | RIB |
| RD | RIB DUAL/TRIPLE |
| RM | RIB MULTIPLE |
| RS | RIB SINGLE |
| KD | ROCK DEEP |
| KE | ROCK EXTRA DEEP |
| KR | ROCK REGULAR |
| KS | ROCK REGULAR E-3 |
| KQ | ROCK REGULAR, L3 |
| KU | ROCK REGULAR, L3 G3 |
| AP | ROCK SERVICE TREAD |
| AL | SAND AND DESERT TREAD |
| SN | SCULPTURE |
| SO | SKID STEER |
| SM | SMOOTH |
| AS | SMOOTH TREAD |
| HY | TAIL WHEEL GROOVED |
| TR | TRACTION |
| HX | TRACTION GRIP REGULAR |
CQBN*HSERVICE TYPE AND TREAD DESIGN
INDICATES THE PRIMARY TYPE OF SERVICE FOR WHICH THE ITEM IS DESIGNED AND THE DESIGN OF THE TREAD.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below.
(CQBNHACTTGD2.0*;CQBNHACTTGD2.0$HACTTGD2.1*)
| Table 1 |
| Reply Code (AN78) | Reply |
| AB | AGRICULTURAL |
| AC | INDUSTRIAL |
| Table 2 |
| Reply Code (AN79) | Reply |
| FL | FORKLIFT |
| GT | GARDEN TRACTOR |
| PL | IMPLEMENT |
| MH | MATERIAL HANDLING |
| TT | TOW TRACTOR |
| TR | UTILITY TRAILER |
| Table 3 |
| Reply Code (AN80) | Reply |
| GD | GRIP DEEP |
| GE | GRIP EXTRA DEEP |
| GP | GRIP REGULAR |
| GR | GROOVED |
| KN | KNOBBED |
| RB | RIB |
| RD | RIB DUAL/TRIPLE |
| RM | RIB MULTIPLE |
| RS | RIB SINGLE |
| KR | ROCK REGULAR |
| SM | SMOOTH |
CQQLHTIRE DESIGN
THE TIRE DESIGN AND THE TYPE OF BASE MOUNTING FACILITY.
Enter the applicable Reply Code from Tables 1 & 2 below.
(CQQLHBSS*)
| Table 1 |
| Reply Code (AN83) | Reply |
| B | INTEGRAL BASE BAND |
| E | LAMINATED CONSTRUCTION |
| C | WHOLLY CONSTRUCTED |
| D | WITH STEEL WIRE ARMOR |
| Table 2 |
| Reply Code (AN84) | Reply |
| CS | CUSHION SOLID |
| HC | HOLLOW CORE |
| SC | SOLID CORE |
| SS | STANDARD SOLID |
CTYTDCOMPOUND CODE CHARACTERISTIC
THE CHARACTERISTIC OF THE ITEM THAT IS THE RESULT OF COMPOUNDING OF SPECIAL INGREDIENTS AS INDICATED BY THE MEDALLION BACKGROUND COLOR CODE.
Enter the applicable reply code from the table below
(CTYTDBR*;CTYTDRG$$DWH*)
| Table 1 |
| Reply Code (AP69) | Reply |
| BR | HEAT RESISTING |
| BL | LOW POWER CONSUMPTION |
| RG | LOW TEMPERATURE RESISTING |
| GR | NONMARKING |
| YE | OIL RESISTANT |
| PU | OZONE RESISTANT |
| WH | STATIC CONDUCTIVE |
| RE | UNIVERSAL |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDRCB000)
| Table 1 |
| Reply Code (MA01) | Reply |
| CCA000 | COTTON |
| GSB000 | GLASS FIBER |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCP000 | PLASTIC POLYAMIDE |
| PCW000 | PLASTIC POLYESTER |
| PCAH00 | PLASTIC POLYURETHANE |
| RCA000 | RUBBER NATURAL |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
CYFMJTIRE AND SIZE DESIGNATION
THE COMMERCIAL DESIGNATION OF A TIRE BASED ON DIFFERENTIATED CHARACTERISTICS AND THE DIMENSIONS BY WHICH A TIRE IS IDENTIFIED.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CYFMJACTEXT1234*)
| Table 1 |
| Reply Code (AN78) | Reply |
| AB | AGRICULTURAL |
| AC | INDUSTRIAL |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
PKWT*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING MATERIAL. PLEASE USE MRC CTJS IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PKWTJOZ2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| GM | GRAMS |
| KG | KILOGRAMS |
| OZ | OUNCES |
| LB | POUNDS |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| CS | CONSTRUCTION |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| FN | FINISH |
| FM | FORM |
| FA | FORMULA |
| GR | GRADE |
| GP | GROUP |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| NR | NUMBER |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| QA | QUALITY |
| RN | RANGE |
| RT | RATING |
| RF | REFERENCE NUMBER |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information