An item of varying tubular shapes molded or extruded from nonmetallic material. It includes flat form plastic tubing designed to be expanded for use and rubber tubing designed to be fabricated into sealing and/or cushioning devices. Excludes: HOSE,NONMETALLIC and TUBE (as modified).
ISAC Reply 3AEE added to MRC MEDA.
ISAC Reply 3DQX added to MRC MEDA.
ISAC Reply 3DQY added to MRC MEDA.
ISAC Reply 3DQZ added to MRC MEDA.
ISAC Reply 3DRA added to MRC MEDA.
ISAC Reply 3DRB added to MRC MEDA.
ISAC Reply 3HOU added to MRC MEDA.
ISAC Reply 1A deleted from MRC MEDA.
ISAC Reply 1B deleted from MRC MEDA.
ISAC Reply 1C deleted from MRC MEDA.
ISAC Reply 1D deleted from MRC MEDA.
ISAC Reply 1E deleted from MRC MEDA.
ISAC Reply 1F deleted from MRC MEDA.
ISAC Reply 3AEE added to MRC ABJH.
ISAC Reply 3DQX added to MRC ABJH.
ISAC Reply 3DQY added to MRC ABJH.
ISAC Reply 3DQZ added to MRC ABJH.
ISAC Reply 3DRA added to MRC ABJH.
ISAC Reply 3HOU added to MRC ABJH.
ISAC Reply 1A deleted from MRC ABJH.
ISAC Reply 1B deleted from MRC ABJH.
ISAC Reply 1C deleted from MRC ABJH.
ISAC Reply 1D deleted from MRC ABJH.
ISAC Reply 1E deleted from MRC ABJH.
ISAC Reply 1F deleted from MRC ABJH.
ISAC Reply 3AEE added to MRC CQGM.
ISAC Reply 3DQX added to MRC CQGM.
ISAC Reply 3DQY added to MRC CQGM.
ISAC Reply 3DQZ added to MRC CQGM.
ISAC Reply 3DRA added to MRC CQGM.
ISAC Reply 3HOU added to MRC CQGM.
ISAC Reply 1A deleted from MRC CQGM.
ISAC Reply 1B deleted from MRC CQGM.
ISAC Reply 1C deleted from MRC CQGM.
ISAC Reply 1D deleted from MRC CQGM.
ISAC Reply 1E deleted from MRC CQGM.
ISAC Reply 1F deleted from MRC CQGM.
ISAC Reply 3AEE added to MRC CRDW.
ISAC Reply 3DQX added to MRC CRDW.
ISAC Reply 3DQY added to MRC CRDW.
ISAC Reply 3HOU added to MRC CRDW.
ISAC Reply 1A deleted from MRC CRDW.
ISAC Reply 1B deleted from MRC CRDW.
ISAC Reply 1C deleted from MRC CRDW.
ISAC Reply 1D deleted from MRC CRDW.
ISAC Reply 1E deleted from MRC CRDW.
ISAC Reply 1F deleted from MRC CRDW.
ISAC Reply 3AEE added to MRC CQBD.
ISAC Reply 3DQX added to MRC CQBD.
ISAC Reply 3DQY added to MRC CQBD.
ISAC Reply 3DQZ added to MRC CQBD.
ISAC Reply 3DRA added to MRC CQBD.
ISAC Reply 3HOU added to MRC CQBD.
ISAC Reply 1A deleted from MRC CQBD.
ISAC Reply 1B deleted from MRC CQBD.
ISAC Reply 1C deleted from MRC CQBD.
ISAC Reply 1D deleted from MRC CQBD.
ISAC Reply 1E deleted from MRC CQBD.
ISAC Reply 1F deleted from MRC CQBD.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3ACU added to MRC MATT.
ISAC Reply 3ADW added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AUC added to MRC MATT.
ISAC Reply 3AUW added to MRC MATT.
ISAC Reply 3AVU added to MRC MATT.
ISAC Reply 3DPT added to MRC MATT.
ISAC Reply 3DQD added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AA deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AG deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2AJ deleted from MRC MATT.
ISAC Reply 2AK deleted from MRC MATT.
ISAC Reply 2AL deleted from MRC MATT.
ISAC Reply 2AM deleted from MRC MATT.
ISAC Reply 2AN deleted from MRC MATT.
ISAC Reply 2AP deleted from MRC MATT.
ISAC Reply 2AQ deleted from MRC MATT.
ISAC Reply 2AR deleted from MRC MATT.
ISAC Reply 2AT deleted from MRC MATT.
ISAC Reply 2AV deleted from MRC MATT.
ISAC Reply 2AW deleted from MRC MATT.
ISAC Reply 2AX deleted from MRC MATT.
ISAC Reply 2AY deleted from MRC MATT.
ISAC Reply 2AZ deleted from MRC MATT.
ISAC Reply 2BA deleted from MRC MATT.
ISAC Reply 2BB deleted from MRC MATT.
ISAC Reply 2BC deleted from MRC MATT.
ISAC Reply 2BD deleted from MRC MATT.
ISAC Reply 2BE deleted from MRC MATT.
ISAC Reply 2BF deleted from MRC MATT.
ISAC Reply 2BG deleted from MRC MATT.
ISAC Reply 2BH deleted from MRC MATT.
ISAC Reply 2BJ deleted from MRC MATT.
ISAC Reply 2BK deleted from MRC MATT.
ISAC Reply 2BL deleted from MRC MATT.
ISAC Reply 2BM deleted from MRC MATT.
ISAC Reply 2BN deleted from MRC MATT.
ISAC Reply 2XX deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3ACU added to MRC MDCL.
ISAC Reply 3ADW added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AUC added to MRC MDCL.
ISAC Reply 3AUW added to MRC MDCL.
ISAC Reply 3AVU added to MRC MDCL.
ISAC Reply 3DPT added to MRC MDCL.
ISAC Reply 3DQD added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AA deleted from MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AG deleted from MRC MDCL.
ISAC Reply 2AH deleted from MRC MDCL.
ISAC Reply 2AJ deleted from MRC MDCL.
ISAC Reply 2AK deleted from MRC MDCL.
ISAC Reply 2AL deleted from MRC MDCL.
ISAC Reply 2AM deleted from MRC MDCL.
ISAC Reply 2AN deleted from MRC MDCL.
ISAC Reply 2AP deleted from MRC MDCL.
ISAC Reply 2AQ deleted from MRC MDCL.
ISAC Reply 2AR deleted from MRC MDCL.
ISAC Reply 2AT deleted from MRC MDCL.
ISAC Reply 2AV deleted from MRC MDCL.
ISAC Reply 2AW deleted from MRC MDCL.
ISAC Reply 2AX deleted from MRC MDCL.
ISAC Reply 2AY deleted from MRC MDCL.
ISAC Reply 2AZ deleted from MRC MDCL.
ISAC Reply 2BA deleted from MRC MDCL.
ISAC Reply 2BB deleted from MRC MDCL.
ISAC Reply 2BC deleted from MRC MDCL.
ISAC Reply 2BD deleted from MRC MDCL.
ISAC Reply 2BE deleted from MRC MDCL.
ISAC Reply 2BF deleted from MRC MDCL.
ISAC Reply 2BG deleted from MRC MDCL.
ISAC Reply 2BH deleted from MRC MDCL.
ISAC Reply 2BJ deleted from MRC MDCL.
ISAC Reply 2BK deleted from MRC MDCL.
ISAC Reply 2BL deleted from MRC MDCL.
ISAC Reply 2BM deleted from MRC MDCL.
ISAC Reply 2BN deleted from MRC MDCL.
ISAC Reply 2XX deleted from MRC MDCL.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED31934*)
CRXXJMEASURING METHOD AND LENGTH
THE MEANS USED AND THE MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRXXJACRL2.0*;CRXXJACEX2.0$$JACRL2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN68) | Reply |
| EX | EXCLUDING END FITTINGS |
| XW | EXTENDED WORKING |
| RL | OVERALL |
| RN | RANDOM |
| WK | WORKING |
ADJLLINNER CONVEYING TUBE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE INNER CONVEYING TUBE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADJLLB1*;ADJLLB12$LB4*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1001 | B1 | INTERLOCKED UNPACKED |
| AAN1009 | B10 | ANNULAR CLOSE-PITCH CORRUGATED |
| AAN1010 | B11 | HELICAL OPEN-PITCH CORRUGATED |
| AAN1011 | B12 | HELICAL CLOSE-PITCH CORRUGATED |
| AAN1012 | B13 | WELDED CORRUGATED |
| DR00043 | B14 | PLAIN |
| AAN1002 | B2 | INTERLOCKED PACKED |
| AAN1003 | B3 | OVERLAPPED SQUARE LOCKED UNPACKED |
| AAN1004 | B4 | OVERLAPPED SQUARE LOCKED PACKED |
| AAN1005 | B5 | OVERLAPPED DOUBLE-GROOVE UNPACKED |
| AAN1006 | B6 | OVERLAPPED DOUBLE-GROOVE PACKED |
| AAN1007 | B8 | OVERLAPPED HIGH RIDGE PACKED |
| AAN1008 | B9 | ANNULAR OPEN-PITCH CORRUGATED |
IF STYLE/REPLY CODE(s) A1 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKV and AARX)
IF STYLE/REPLY CODE(s) A2 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJT and ADJV and ADJU and ADJW)
IF STYLE/REPLY CODE(s) A3 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJV and ADJT)
IF STYLE/REPLY CODE(s) A4 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJV and ADJT and ADJU and ADJW)
IF STYLE/REPLY CODE(s) A7 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJT and AAGT)
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRLA7)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1013 | A1 | ROUND |
| AAN1014 | A2 | OVAL |
| AAN1015 | A3 | SQUARE |
| AAN1016 | A4 | RECTANGULAR |
| AAN1017 | A7 | FLAT |
AAGT*JWALL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE WALL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAGTJAC2.0*;AAGTJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAB2.0*;AARXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAC2.0*;ABKVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAA2.0*;ADJUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJV*JOUTSIDE WIDTH
AN OUTSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJVJAB2.0*;ADJVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJW*JOUTSIDE LENGTH
A MEASUREMENT OF THE LONGEST OUTSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJWJAB2.0*;ADJWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AASF*JNONMETALLIC HARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF A NONMETALLIC ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASFJARM2.0*;AASFJARM2.0$$JARM2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AC26) | Reply |
| RM | ROCKWELL M |
| RR | ROCKWELL R |
| SA | SHORE DUROMETER A |
CQBC*JMINIMUM TENSILE STRENGTH
THE MAXIMUM RATED LOAD IN TENSION APPLIED IN A LONGITUDINAL DIRECTION,PER UNIT OF CROSS-SECTIONAL AREA,THAT THE MATERIAL CAN WITHSTAND WITHOUT RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CQBCJLTEXT1234*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
MEDA*DMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MEDA3AEEDABJ*;MEDA3AEEDABJ$DAAB*;MEDA3AEEDABJ$$DAAB*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3DRB | FOURTH RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN91) | Reply |
| AAB | ACETYLENE |
| AAC | ACID |
| AAD | AGRICULTURAL SPRAY SOLUTION |
| AAE | AIR |
| ABW | ALCOHOL |
| AAF | ALCOHOL, ETHYL |
| AAG | ALCOHOL, METHYL |
| AAJ | AMMONIA, LIQUID |
| ABH | BRAKE FLUID, NONMINERAL OIL |
| AAK | BROMOCHLOROMETHANE |
| AAL | BUTANE |
| AAM | CARBON DIOXIDE |
| ACW | CHEMICAL |
| AEM | DETERGENT |
| AEN | EFFLUENT, DOMESTIC |
| AAN | ETHYLENE GLYCOL |
| AAY | FUEL/OIL, HYDROCARBON |
| AAP | FUMIGANT |
| AAQ | GAS |
| ABA | GAS, INERT |
| ABD | GAS, NATURAL |
| AAR | GREASE |
| AAS | HYDRAULIC FLUID |
| ALY | HYDROCARBONS |
| AAZ | HYDROGEN |
| ABB | LIQUID, INGESTED |
| ABE | NITROGEN, GASEOUS |
| ABC | OIL, LUBRICATING, DIESTER BASE |
| ABJ | OXYGEN, GASEOUS |
| ABK | OXYGEN, LIQUID |
| ACK | PROPANE |
| AHA | REFRIGERANT 500 |
| ABP | STEAM |
| ABQ | TRICHLOROETHYLENE |
| ABR | WATER |
| ABS | WATER, FRESH |
| ABT | WATER, SALT |
ABJH*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGM3AEEJL2.0*;CQGM3AEEJL2.0$JL2.0*;CQGM3AEEJL2.0$$JL2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CRDW*JHYDROSTATIC TEST PRESSURE
A STEADY,UNIFORM,INTERNAL,STATIC PRESSURE THAT THE ITEM MUST WITHSTAND WITHOUT LEAKAGE,ABNORMAL DISTORTION,OR DAMAGE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRDW3DQXJK2.0*;CRDW3DQXJK2.0$JK2.0*;CRDW3DQXJK2.0$$JK2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CQBD*JBURST TEST PRESSURE
THE MINIMUM INTERNAL PRESSURE RATING,DETERMINED BY DESTRUCTION TESTS,AT WHICH THE ITEM CAN BE EXPECTED TO RUPTURE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQBD3AEEJL2.0*;CQBD3AEEJL2.0$JL2.0*;CQBD3AEEJL2.0$$JL2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CRSM*BVACUUM IN TORR
THE ULTIMATE MAXIMUM VACUUM,EXPRESSED IN TERMS OF ABSOLUTE PRESSURE,THAT MAY BE PRODUCED BY OR APPLIED TO AN ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CRSMB2.0)
ADJS*DEXTERIOR COLOR
THE HUE OR TINT OF THE EXTERIOR OF THE ITEM.
Enter the applicable reply code from the table below
(ADJSDCL0001*;ADJSDSL0000$DBL0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| AM0004 | AMBER, TRANSLUCENT |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| CL0001 | COLORLESS |
| CR0000 | CREAM |
| CR0004 | CREAM, LIGHT |
| GY0002 | GRAY, LIGHT |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| NA0003 | NATURAL, TRANSLUCENT |
| RG0000 | ORANGE |
| PU0000 | PURPLE |
| RE0000 | RED |
| SL0000 | SILVER |
| WH0000 | WHITE |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
| YE0046 | YELLOW, TRANSPARENT |
CRJM*DOUTER COVERING ENVIRONMENTAL PROTECTION
THE TYPE OF PROTECTION PROVIDED BY THE OUTER COVERING.
Enter the applicable reply code from the table below
(CRJMDAJC*;CRJMDAAC$$DACN*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| ABY | ACID RESISTANT |
| AEQ | AGE RESISTANT |
| ABZ | ALCOHOL RESISTANT |
| ACK | ALKALI RESISTANT |
| DNV | AMMONIA RESISTANT |
| AAB | CHEMICAL RESISTANT |
| ACB | COLD RESISTANT |
| AAC | CORROSION RESISTANT |
| DNT | CRACK |
| AHZ | ESTER RESISTANT |
| AJA | ETHYLENE GLYCOL RESISTANT |
| AAJ | FIRE RESISTANT |
| AGC | FIRE RETARDANT |
| AAL | FUEL RESISTANT |
| ACQ | GREASE RESISTANT |
| AAP | HEAT RESISTANT |
| ADS | HYDRAULIC SOLUTION RESISTANT |
| AJB | INCOMBUSTIBLE |
| AEM | LIGHT RESISTANT |
| AGF | LOW TEMPERATURE |
| ACC | MILDEW RESISTANT |
| AAX | OIL RESISTANT |
| AJC | OXIDATION RESISTANT |
| ACN | OZONE RESISTANT |
| ABA | SALT WATER RESISTANT |
| ABE | SHOCK RESISTANT |
| ABF | SOLVENT RESISTANT |
| ACW | STEAM RESISTANT |
| ADZ | VERMIN PROOF |
| ACM | WATER RESISTANT |
| ABK | WATERPROOF |
| ABN | WEATHER RESISTANT |
| ABM | WEATHERPROOF |
ACKH*JMINIMUM INSIDE BENDING RADIUS
THE MINIMUM INSIDE BENDING RADIUS FORMED WITHOUT STRESSING OR DEFORMATION OF A FLEXIBLE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACKHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CRWL*DINSIDE SURFACE CONDITION
THE CONDITION OF THE ITEM WITH RESPECT TO THE TEXTURE OF THE INNER SURFACE.
Enter the applicable reply code from the table below
(CRWLDSM)
| Table 1 |
| Reply Code (AN72) | Reply |
| CV | CONVOLUTED |
| RG | ROUGH |
| SM | SMOOTH |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AVUDPCXL02*;MATT3AVUDPCXL02$DGSE000*;MATT3AVUDPCXL02$$DGSE000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3ADW | TUBE |
| 3AEE | OVERALL |
| 3AUC | INSIDE |
| 3AUW | OUTSIDE |
| 3AVU | SLEEVE |
| 3DPT | BALL BEARING |
| 3DQD | UNION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALB000 | ALUMINUM ALLOY |
| ASA000 | ASBESTOS |
| CSA000 | CELLULOSE |
| CSB000 | CELLULOSE ACETATE |
| CUA000 | COPPER |
| CCA000 | COTTON |
| GSA000 | GLASS |
| GSE000 | GLASS BOROSILICATE |
| GSB000 | GLASS FIBER |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCD000 | PLASTIC ACRYLIC |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCE000 | PLASTIC ALKYD |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCAAQ0 | PLASTIC CHLOROTRIFLUOROETHYLENE |
| PCXL02 | PLASTIC CROSS-LINKED ETHYLENE TETRAFLUOROETHYLENE |
| PCDN00 | PLASTIC CROSS-LINKED MODIFIED ETHYLENE TETRAFLUOROETHYLENE |
| PCH000 | PLASTIC EPOXY |
| PCCS00 | PLASTIC ETHYLENE-TETRAFLUOROETHYLENE |
| PCBR00 | PLASTIC FLUORINATED ETHYLENE PROPYLENE |
| PCAAD0 | PLASTIC FLUOROCARBON |
| PCJ000 | PLASTIC MELAMINE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCCB00 | PLASTIC NYLON |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAM00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCAA00 | PLASTIC POLYHEXAMETHYLENE SEBACAMIDE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCCD00 | PLASTIC POLYVINYL |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAAT0 | PLASTIC POLYVINYL ALCOHOL |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCCC00 | PLASTIC POLYVINYL CHLORIDE-ACETATE |
| PCBG00 | PLASTIC POLYVINYLIDENE CHLORIDE |
| PCAS00 | PLASTIC POLYVINYLIDENE FLUORIDE |
| PCBC00 | PLASTIC STYRENE |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCBA00 | PLASTIC URETHANE |
| PCAP00 | PLASTIC VINYL |
| RCE000 | RUBBER |
| RC0024 | RUBBER BUTADIENE CLASS BR |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0009 | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RC0014 | RUBBER FLUOROSILICONE CLASS FQ |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCA000 | RUBBER NATURAL |
| RCAC00 | RUBBER NEOPRENE |
| RC0001 | RUBBER POLYACRYLATE CLASS ACM |
| RCL000 | RUBBER POLYETHYLENE |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0023 | RUBBER POLYSULFIDE CLASS T |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| RCK000 | RUBBER SYNTHETIC-NATURAL |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3ADW | TUBE |
| 3AEE | OVERALL |
| 3AUC | INSIDE |
| 3AUW | OUTSIDE |
| 3AVU | SLEEVE |
| 3DPT | BALL BEARING |
| 3DQD | UNION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
FLEX*DFLEXIBILITY
FLEXIBLE,CAPABLE OF BEING BENT,TURNED OR TWISTED,WITHIN LIMITS,WITHOUT BREAKING,OR RIGID,RESISTING CHANGE OF FORM,INFLEXIBLE.
Enter the applicable reply code from the table below
(FLEXDB)
| Table 1 |
| Reply Code (AD03) | Reply |
| A | FLEXIBLE |
| B | RIGID |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDFVT*;CBBLDCZW$$DASH*)
| Table 1 |
| Reply Code (AN47) | Reply |
| CZW | FLEXIBLE |
| FVT | IDENTICAL ENDS |
| DJT | RIGID |
| FNY | ROHS DIRECTIVE COMPLIANCE |
| ASH | SPIRAL SPRING COILED |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ029*;HZRDDHAZ008$$DHAZ011*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ029 | LEAD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information