A relay that performs the function of opening or closing an electrical circuit in response to electrical changes in an external circuit. In lieu of separable contacts and their actuator(s), the switching function is accomplished by means of an arrangement of semiconductors and passive circuit devices. The device is designed to have electrical isolation between control circuit and output circuit. Excludes:RELAY,HYBRID.
ISAC Reply 3AEE added to MRC AMSE.
ISAC Reply 3DUQ added to MRC AMSE.
ISAC Reply 3DUR added to MRC AMSE.
ISAC Reply 3HCC added to MRC AMSE.
ISAC Reply 3HCD added to MRC AMSE.
ISAC Reply 3HCE added to MRC AMSE.
ISAC Reply 3HCF added to MRC AMSE.
ISAC Reply 3HCG added to MRC AMSE.
ISAC Reply 3HCH added to MRC AMSE.
ISAC Reply 3HCI added to MRC AMSE.
ISAC Reply 3HCJ added to MRC AMSE.
ISAC Reply 3HCK added to MRC AMSE.
ISAC Reply 3HCL added to MRC AMSE.
ISAC Reply 3HCM added to MRC AMSE.
ISAC Reply 3HOU added to MRC AMSE.
ISAC Reply 1A deleted from MRC AMSE.
ISAC Reply 1B deleted from MRC AMSE.
ISAC Reply 1C deleted from MRC AMSE.
ISAC Reply 1D deleted from MRC AMSE.
ISAC Reply 1E deleted from MRC AMSE.
ISAC Reply 1F deleted from MRC AMSE.
ISAC Reply 1G deleted from MRC AMSE.
ISAC Reply 1H deleted from MRC AMSE.
ISAC Reply 1J deleted from MRC AMSE.
ISAC Reply 1K deleted from MRC AMSE.
ISAC Reply 1L deleted from MRC AMSE.
ISAC Reply 1M deleted from MRC AMSE.
ISAC Reply 1N deleted from MRC AMSE.
ISAC Reply 3AEE added to MRC AXNP.
ISAC Reply 3CEV added to MRC AXNP.
ISAC Reply 3DUQ added to MRC AXNP.
ISAC Reply 3DUR added to MRC AXNP.
ISAC Reply 3HCC added to MRC AXNP.
ISAC Reply 3HCK added to MRC AXNP.
ISAC Reply 3HCN added to MRC AXNP.
ISAC Reply 3HCO added to MRC AXNP.
ISAC Reply 3HCP added to MRC AXNP.
ISAC Reply 3HCQ added to MRC AXNP.
ISAC Reply 3HCR added to MRC AXNP.
ISAC Reply 3HCS added to MRC AXNP.
ISAC Reply 3HOU added to MRC AXNP.
ISAC Reply 1A deleted from MRC AXNP.
ISAC Reply 1B deleted from MRC AXNP.
ISAC Reply 1C deleted from MRC AXNP.
ISAC Reply 1D deleted from MRC AXNP.
ISAC Reply 1E deleted from MRC AXNP.
ISAC Reply 1F deleted from MRC AXNP.
ISAC Reply 1G deleted from MRC AXNP.
ISAC Reply 1H deleted from MRC AXNP.
ISAC Reply 1J deleted from MRC AXNP.
ISAC Reply 1K deleted from MRC AXNP.
ISAC Reply 1L deleted from MRC AXNP.
ISAC Reply 3AEE added to MRC CRXH.
ISAC Reply 3DUQ added to MRC CRXH.
ISAC Reply 3DUR added to MRC CRXH.
ISAC Reply 3HCH added to MRC CRXH.
ISAC Reply 3HCJ added to MRC CRXH.
ISAC Reply 3HCL added to MRC CRXH.
ISAC Reply 3HCM added to MRC CRXH.
ISAC Reply 3HCT added to MRC CRXH.
ISAC Reply 3HCU added to MRC CRXH.
ISAC Reply 3HCV added to MRC CRXH.
ISAC Reply 3HOU added to MRC CRXH.
ISAC Reply 1A deleted from MRC CRXH.
ISAC Reply 1B deleted from MRC CRXH.
ISAC Reply 1C deleted from MRC CRXH.
ISAC Reply 1D deleted from MRC CRXH.
ISAC Reply 1E deleted from MRC CRXH.
ISAC Reply 1F deleted from MRC CRXH.
ISAC Reply 1G deleted from MRC CRXH.
ISAC Reply 1H deleted from MRC CRXH.
ISAC Reply 1J deleted from MRC CRXH.
ISAC Reply 1K deleted from MRC CRXH.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED31446*)
AMSEJVOLTAGE RATING
THE VALUE(S) OF POTENTIAL FOR WHICH THE ITEM IS RATED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AMSE3AEEJLC2.0*;AMSE3AEEJLC2.0$JLC2.0*;AMSE3AEEJLC2.0$$JLC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DUQ | INPUT |
| 3DUR | OUTPUT |
| 3HCC | CONTROL |
| 3HCD | DIELECTRIC |
| 3HCE | DROPOUT |
| 3HCF | HOLD |
| 3HCG | OFFSET |
| 3HCH | OPERATE |
| 3HCI | PICKUP |
| 3HCJ | RELEASE |
| 3HCK | SURGE |
| 3HCL | TURN-OFF |
| 3HCM | TURN-ON |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB63) | Reply |
| U | MICROVOLTS |
| L | MILLIVOLTS |
| V | VOLTS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
TTQYJTERMINAL TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF TERMINALS FOR PROVIDING ELECTRICAL CONNECTION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TTQYJAAH2*;TTQYJAAH2$$JAAH3*)
| Table 1 |
| Reply Code (AN89) | Reply |
| AAB | BANANA PLUG |
| AKH | BEAM LEAD |
| ABL | BINDING POST |
| AAD | BONDING PAD |
| ABM | BRACKET |
| AFX | CASE |
| ABN | CLAMP |
| AJN | CONNECTOR |
| AJT | ELECTRON TUBE BASE |
| AAH | FERRULE |
| AAJ | FLANGE |
| AAK | INSULATED WIRE LEAD |
| AAL | INSULATED WIRE LEAD W/TERMINAL LUG |
| AEC | KNIFE BLADE |
| AAM | PIN |
| ACR | PRINTED CIRCUIT |
| ADA | QUICK DISCONNECT, FEMALE |
| ACZ | QUICK DISCONNECT, MALE |
| AAR | RIBBON |
| ABQ | SCREW |
| AAS | SOLDER STUD |
| ABX | TAB W/SCREW |
| ABY | TAB W/WIRE LEAD |
| ABB | TAB, SOLDER LUG |
| ABC | THREADED HOLE |
| ABD | THREADED STUD |
| ACB | TURRET |
| ABF | UNINSULATED WIRE LEAD |
| ABG | UNINSULATED WIRE LEAD W/TERMINAL LUG |
| ABH | UNTHREADED HOLE |
| ACM | WIRE HOOK |
| ACD | WIRE LOOP |
| AFM | WIRE WRAP |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
AXNP*JCURRENT RATING
THE AMOUNT OF CURRENT FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AXNP3HCOJAA2.0*;AXNP3HCOJAA2.0$JAA2.0*;AXNP3HCOJAA2.0$$JAA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CEV | LAMP |
| 3DUQ | INPUT |
| 3DUR | OUTPUT |
| 3HCC | CONTROL |
| 3HCK | SURGE |
| 3HCN | INDUCTIVE |
| 3HCO | LEAKAGE |
| 3HCP | OVERLOAD |
| 3HCQ | RESISTIVE |
| 3HCR | OFF-STATE |
| 3HCS | ON-STATE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC30) | Reply |
| A | AMPERES |
| U | MICROAMPERES |
| L | MILLIAMPERES |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CRXH*JTIME DELAY
THE INTERVAL FOR WHICH THE ITEM,BY DESIGN,IS PURPOSELY DELAYED BETWEEN INTRODUCTION OF POWER INTO THE ENERGIZING ELEMENT AND COMPLETION OF TRAVEL OF THE CONTACT CARRIER,AND/OR BETWEEN INTERRUPTION OF THE ENERGIZING POWER AND RETURN OF THE CONTACT CARRIER TO ITS NORMAL DE-ENERGIZING POSITION.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRXH3HCLJAJC2.0*;CRXH3HCLJAJC2.0$JAJC2.0*;CRXH3HCLJAJC2.0$$JAJC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DUQ | INPUT |
| 3DUR | OUTPUT |
| 3HCH | OPERATE |
| 3HCJ | RELEASE |
| 3HCL | TURN-OFF |
| 3HCM | TURN-ON |
| 3HCT | DELAY |
| 3HCU | FALL |
| 3HCV | SWITCHING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH68) | Reply |
| DY | DAYS |
| HR | HOURS |
| AH | MICROSECONDS |
| AJ | MILLISECONDS |
| MN | MINUTES |
| NS | NANOSECONDS |
| SC | SECONDS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
APCL*DRELAY TYPE
INDICATES THE TYPE OF RELAY/S/ PROVIDED.
Enter the applicable reply code from the table below
(APCLDAF)
| Table 1 |
| Reply Code (AK38) | Reply |
| AF | CONTROL |
| CB | SWITCHING |
| BL | TIME DELAY |
AFGA*JOPERATING TEMP RANGE
THE MINIMUM AND MAXIMUM LIMITS OF TEMPERATURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFGAJFM32.0/P50.0*;AFGAJFM32.0/P50.0$$JF*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAA2.0*;ADAVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDASG*;CBBLDAGQ$$DDBN*)
| Table 1 |
| Reply Code (AN47) | Reply |
| DBN | ELECTROMAGNETIC INTERFERENCE SHIELDING |
| CWS | HEAT SINK |
| ASG | HERMETICALLY SEALED |
| BGR | INDICATOR LIGHT |
| CYE | MOISTURE RESISTANT |
| AAJ | MOUNTING HARDWARE |
| ENW | OPTICALLY ISOLATED |
| GMG | PLUG-IN |
| AGQ | RFI SHIELDING |
| ENX | SALT SPRAY RESISTANT |
| CZF | SHOCK RESISTANT |
| BXC | STATIC OPERATION |
| ENY | VIBRATION RESISTANT |
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJPDA0002.0*;PMLCJPDA0002.0$JPDA0002.0*;PMLCJPDA0002.0$$JPDA0002.1*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information