A device to hold and manipulate high frequency electrodes for cutting, dehydrating, and destroying tissue. For a similar device to hold a formed wire, which is heated by a low frequency current, see HANDLE, CAUTERY.
expandFSC Information
6515Medical and Surgical Instruments, Equipment, and Supplies
expandColloquial Information
No Colloquials assigned to this Approve Item Name at this time
expandChange List
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AEF added to MRC MATT.
ISAC Reply 3BDV added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AA deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AG deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2AJ deleted from MRC MATT.
ISAC Reply 2AK deleted from MRC MATT.
ISAC Reply 2AL deleted from MRC MATT.
ISAC Reply 2AM deleted from MRC MATT.
ISAC Reply 2AN deleted from MRC MATT.
ISAC Reply 2AP deleted from MRC MATT.
ISAC Reply 2AQ deleted from MRC MATT.
ISAC Reply 2AR deleted from MRC MATT.
ISAC Reply 2AS deleted from MRC MATT.
ISAC Reply 2AT deleted from MRC MATT.
ISAC Reply 2AU deleted from MRC MATT.
ISAC Reply 2AV deleted from MRC MATT.
ISAC Reply 2AW deleted from MRC MATT.
ISAC Reply 2AX deleted from MRC MATT.
ISAC Reply 2AY deleted from MRC MATT.
ISAC Reply 2AZ deleted from MRC MATT.
ISAC Reply 2BA deleted from MRC MATT.
ISAC Reply 2BB deleted from MRC MATT.
ISAC Reply 2BC deleted from MRC MATT.
ISAC Reply 2BD deleted from MRC MATT.
ISAC Reply 2BE deleted from MRC MATT.
ISAC Reply 2BF deleted from MRC MATT.
ISAC Reply 2BG deleted from MRC MATT.
ISAC Reply 2BH deleted from MRC MATT.
ISAC Reply 2BJ deleted from MRC MATT.
ISAC Reply 2BK deleted from MRC MATT.
ISAC Reply 2BL deleted from MRC MATT.
ISAC Reply 2BM deleted from MRC MATT.
ISAC Reply 2BN deleted from MRC MATT.
ISAC Reply 2BP deleted from MRC MATT.
ISAC Reply 2BQ deleted from MRC MATT.
ISAC Reply 2BR deleted from MRC MATT.
ISAC Reply 2BS deleted from MRC MATT.
ISAC Reply 2BT deleted from MRC MATT.
ISAC Reply 2AA deleted from MRC SFTT.
ISAC Reply 2AB deleted from MRC SFTT.
ISAC Reply 2AC deleted from MRC SFTT.
ISAC Reply 2AD deleted from MRC SFTT.
ISAC Reply 2AE deleted from MRC SFTT.
ISAC Reply 2AF deleted from MRC SFTT.
ISAC Reply 2AG deleted from MRC SFTT.
ISAC Reply 2AH deleted from MRC SFTT.
ISAC Reply 2AJ deleted from MRC SFTT.
ISAC Reply 2AK deleted from MRC SFTT.
ISAC Reply 2AL deleted from MRC SFTT.
ISAC Reply 2AM deleted from MRC SFTT.
ISAC Reply 2AN deleted from MRC SFTT.
ISAC Reply 2AP deleted from MRC SFTT.
ISAC Reply 2AQ deleted from MRC SFTT.
ISAC Reply 2AR deleted from MRC SFTT.
ISAC Reply 2AS deleted from MRC SFTT.
ISAC Reply 2AT deleted from MRC SFTT.
ISAC Reply 2AU deleted from MRC SFTT.
ISAC Reply 2AV deleted from MRC SFTT.
ISAC Reply 2AW deleted from MRC SFTT.
ISAC Reply 2AX deleted from MRC SFTT.
ISAC Reply 2AY deleted from MRC SFTT.
ISAC Reply 2AZ deleted from MRC SFTT.
ISAC Reply 2BA deleted from MRC SFTT.
ISAC Reply 2BB deleted from MRC SFTT.
ISAC Reply 2BC deleted from MRC SFTT.
ISAC Reply 2BD deleted from MRC SFTT.
ISAC Reply 2BE deleted from MRC SFTT.
ISAC Reply 2BF deleted from MRC SFTT.
ISAC Reply 2BG deleted from MRC SFTT.
ISAC Reply 2BH deleted from MRC SFTT.
ISAC Reply 2BJ deleted from MRC SFTT.
ISAC Reply 2BK deleted from MRC SFTT.
ISAC Reply 2BL deleted from MRC SFTT.
ISAC Reply 2BM deleted from MRC SFTT.
ISAC Reply 2BN deleted from MRC SFTT.
ISAC Reply 2BP deleted from MRC SFTT.
ISAC Reply 2BQ deleted from MRC SFTT.
ISAC Reply 2BR deleted from MRC SFTT.
ISAC Reply 2BS deleted from MRC SFTT.
ISAC Reply 2BT deleted from MRC SFTT.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3BDV added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 2AA deleted from MRC HUES.
ISAC Reply 2AB deleted from MRC HUES.
ISAC Reply 2AC deleted from MRC HUES.
ISAC Reply 2AD deleted from MRC HUES.
ISAC Reply 2AE deleted from MRC HUES.
ISAC Reply 2AF deleted from MRC HUES.
ISAC Reply 2AG deleted from MRC HUES.
ISAC Reply 2AH deleted from MRC HUES.
ISAC Reply 2AJ deleted from MRC HUES.
ISAC Reply 2AK deleted from MRC HUES.
ISAC Reply 2AL deleted from MRC HUES.
ISAC Reply 2AM deleted from MRC HUES.
ISAC Reply 2AN deleted from MRC HUES.
ISAC Reply 2AP deleted from MRC HUES.
ISAC Reply 2AQ deleted from MRC HUES.
ISAC Reply 2AR deleted from MRC HUES.
ISAC Reply 2AS deleted from MRC HUES.
ISAC Reply 2AT deleted from MRC HUES.
ISAC Reply 2AU deleted from MRC HUES.
ISAC Reply 2AV deleted from MRC HUES.
ISAC Reply 2AW deleted from MRC HUES.
ISAC Reply 2AX deleted from MRC HUES.
ISAC Reply 2AY deleted from MRC HUES.
ISAC Reply 2AZ deleted from MRC HUES.
ISAC Reply 2BA deleted from MRC HUES.
ISAC Reply 2BB deleted from MRC HUES.
ISAC Reply 2BC deleted from MRC HUES.
ISAC Reply 2BD deleted from MRC HUES.
ISAC Reply 2BE deleted from MRC HUES.
ISAC Reply 2BF deleted from MRC HUES.
ISAC Reply 2BG deleted from MRC HUES.
ISAC Reply 2BH deleted from MRC HUES.
ISAC Reply 2BJ deleted from MRC HUES.
ISAC Reply 2BK deleted from MRC HUES.
ISAC Reply 2BL deleted from MRC HUES.
ISAC Reply 2BM deleted from MRC HUES.
ISAC Reply 2BN deleted from MRC HUES.
ISAC Reply 2BP deleted from MRC HUES.
ISAC Reply 2BQ deleted from MRC HUES.
ISAC Reply 2BR deleted from MRC HUES.
ISAC Reply 2BS deleted from MRC HUES.
ISAC Reply 2BT deleted from MRC HUES.
MRC MDCL has been deleted
MRC STDC has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED30855*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDAL0048*;MATT3AEEDAL0048$DST1050*;MATT3AEEDAL0048$$DST1050*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3AEFHANDLE
3BDVGRIP
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (MA01)Reply
ALA000ALUMINUM
ALB000ALUMINUM ALLOY
AL1230ALUMINUM ALLOY 1230
AL2011ALUMINUM ALLOY 2011
AL2014ALUMINUM ALLOY 2014
AL2017ALUMINUM ALLOY 2017
AL2024ALUMINUM ALLOY 2024
AL0038ALUMINUM ALLOY 222.0
AL0039ALUMINUM ALLOY 242.0
AL0025ALUMINUM ALLOY 295.0
AL3003ALUMINUM ALLOY 3003
AL0035ALUMINUM ALLOY 319.0
AL0036ALUMINUM ALLOY 328.0
AL0045ALUMINUM ALLOY 355.0
AL0046ALUMINUM ALLOY 356.0
AL0029ALUMINUM ALLOY 360.0
AL0031ALUMINUM ALLOY 380.0
AL0054ALUMINUM ALLOY 383.0
AL0032ALUMINUM ALLOY 384.0
AL0027ALUMINUM ALLOY 413.0
AL0044ALUMINUM ALLOY 443.0
AL5052ALUMINUM ALLOY 5052
AL5054ALUMINUM ALLOY 5054
AL5056ALUMINUM ALLOY 5056
AL5083ALUMINUM ALLOY 5083
AL5086ALUMINUM ALLOY 5086
AL0026ALUMINUM ALLOY 514.0
AL0050ALUMINUM ALLOY 518.0
AL0043ALUMINUM ALLOY 520.0
AL0059ALUMINUM ALLOY 535.0
AL6003ALUMINUM ALLOY 6003
AL6061ALUMINUM ALLOY 6061
AL6062ALUMINUM ALLOY 6062
AL6063ALUMINUM ALLOY 6063
AL6262ALUMINUM ALLOY 6262
AL0047ALUMINUM ALLOY 705.0
AL0048ALUMINUM ALLOY 707.0
AL7075ALUMINUM ALLOY 7075
AL0002ALUMINUM ALLOY A356.0
AL0052ALUMINUM ALLOY A360.0
AL0028ALUMINUM ALLOY A380.0
AL0030ALUMINUM ALLOY A413.0
AL0042ALUMINUM ALLOY A712.0
AL0033ALUMINUM ALLOY B443.0
AL0041ALUMINUM ALLOY B514.0
AL0060ALUMINUM ALLOY C355.0
AL0008ALUMINUM ALLOY C443.0
AL0024ALUMINUM ALLOY D712.0
ASA000ASBESTOS
CSA000CELLULOSE
CUA000COPPER
CUB000COPPER ALLOY
CU0069COPPER ALLOY 172
CU0074COPPER ALLOY 230
CU0076COPPER ALLOY 240
CU0079COPPER ALLOY 260
CU0304COPPER ALLOY 262
CU0080COPPER ALLOY 268
CU0081COPPER ALLOY 270
CU0272COPPER ALLOY 272
CU0274COPPER ALLOY 274
CU0302COPPER ALLOY 280
CU0330COPPER ALLOY 330
CU0305COPPER ALLOY 331
CU0332COPPER ALLOY 332
CU0335COPPER ALLOY 335
CU0340COPPER ALLOY 340
CU0088COPPER ALLOY 342
CU0306COPPER ALLOY 344
CU0307COPPER ALLOY 345
CU0308COPPER ALLOY 347
CU0309COPPER ALLOY 348
CU0310COPPER ALLOY 350
CU0089COPPER ALLOY 353
CU0090COPPER ALLOY 356
CU0091COPPER ALLOY 360
CU0370COPPER ALLOY 370
CU0092COPPER ALLOY 377
CU0099COPPER ALLOY 464
CU0465COPPER ALLOY 465
CU0466COPPER ALLOY 466
CU0467COPPER ALLOY 467
CU0100COPPER ALLOY 482
CU0101COPPER ALLOY 485
CU0103COPPER ALLOY 510
CU0106COPPER ALLOY 524
CU0109COPPER ALLOY 544
CU0127COPPER ALLOY 642
CU0172COPPER ALLOY 836
CU0174COPPER ALLOY 842
CU0175COPPER ALLOY 844
CU0177COPPER ALLOY 852
CU0178COPPER ALLOY 854
CU0195COPPER ALLOY 903
CU0196COPPER ALLOY 905
CU0198COPPER ALLOY 910
CU0202COPPER ALLOY 922
CU0203COPPER ALLOY 923
CU0206COPPER ALLOY 932
CU0207COPPER ALLOY 934
CU0220COPPER ALLOY 955
CKA000CORK
CCA000COTTON
GSA000GLASS
GSB000GLASS FIBER
HRH000HARDWOOD
FEF000IRON ALLOY
FEB000IRON CAST
FE0038IRON CAST UNS F22200
FE0039IRON CAST UNS F22400
FE0059IRON CAST UNS F25530
FE0060IRON CAST UNS F26230
FEC000IRON MALLEABLE
FEE000IRON RUST RESISTING
FEG000IRON WROUGHT
LRA000LEATHER
MGB000MAGNESIUM ALLOY
MG0007MAGNESIUM ALLOY AZ63A
MG0003MAGNESIUM ALLOY AZ80A
MG0012MAGNESIUM ALLOY AZ91A
MG0008MAGNESIUM ALLOY AZ91C
MG0009MAGNESIUM ALLOY AZ92A
NLA000NICKEL
NLB000NICKEL ALLOY
NL0017NICKEL ALLOY R-405
PPA000PAPER
PCA000PLASTIC
PCB000PLASTIC ACETAL
PCD000PLASTIC ACRYLIC
PCBL00PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS)
PCE000PLASTIC ALKYD
PCBN00PLASTIC CELLULOSE ACETATE BUTYRATE
PCBJ00PLASTIC CELLULOSE NITRATE
PCG000PLASTIC DIALLYL PHTHALATE
PCH000PLASTIC EPOXY
PCJ000PLASTIC MELAMINE
PCN000PLASTIC PHENOLIC
PCP000PLASTIC POLYAMIDE (NYLON)
PCQ000PLASTIC POLYCAPROLACTAM
PCR000PLASTIC POLYCARBONATE
PCW000PLASTIC POLYESTER
PCX000PLASTIC POLYETHYLENE
PCZ000PLASTIC POLYHEXAMETHYLENE ADIPAMIDE
PCAM00PLASTIC POLYHEXAMETHYLENE AMIDE
PCAB00PLASTIC POLYOLEFIN
PCAF00PLASTIC POLYTETRAFLUOROETHYLENE
PCAAABPLASTIC POLYUNDECANOAMIDE
PCAH00PLASTIC POLYURETHANE
PCAJ00PLASTIC POLYVINYL CHLORIDE (PVC)
PCAP00PLASTIC VINYL
PCAAA0PLASTIC VINYL ACETATE
RCE000RUBBER
RC0019RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
RC0022RUBBER BUTADIENE-STYRENE CLASS SBR
RC0007RUBBER CHLOROPRENE CLASS CR
RC0017RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
RC0020RUBBER POLYISOPRENE NATURAL CLASS NR
RC0018RUBBER POLYISOPRENE SYNTHETIC CLASS IR
RCB000RUBBER SYNTHETIC
STA000STEEL
ST1006STEEL COMP 1006
ST1008STEEL COMP 1008
ST1009STEEL COMP 1009
ST1010STEEL COMP 1010
ST1011STEEL COMP 1011
ST1012STEEL COMP 1012
ST1013STEEL COMP 1013
ST1015STEEL COMP 1015
ST1016STEEL COMP 1016
ST1017STEEL COMP 1017
ST1018STEEL COMP 1018
ST1019STEEL COMP 1019
ST1020STEEL COMP 1020
ST1021STEEL COMP 1021
ST1022STEEL COMP 1022
ST1023STEEL COMP 1023
ST1025STEEL COMP 1025
ST1026STEEL COMP 1026
ST1029STEEL COMP 1029
ST1030STEEL COMP 1030
ST1031STEEL COMP 1031
ST1033STEEL COMP 1033
ST1035STEEL COMP 1035
ST1037STEEL COMP 1037
ST1038STEEL COMP 1038
ST1039STEEL COMP 1039
ST1040STEEL COMP 1040
ST1042STEEL COMP 1042
ST1043STEEL COMP 1043
ST1045STEEL COMP 1045
ST1046STEEL COMP 1046
ST1049STEEL COMP 1049
ST1050STEEL COMP 1050
ST1053STEEL COMP 1053
ST1055STEEL COMP 1055
ST0530STEEL COMP 105-85
ST1060STEEL COMP 1060
ST1065STEEL COMP 1065
ST1069STEEL COMP 1069
ST1070STEEL COMP 1070
ST1074STEEL COMP 1074
ST1075STEEL COMP 1075
ST1078STEEL COMP 1078
ST1080STEEL COMP 1080
ST1084STEEL COMP 1084
ST1085STEEL COMP 1085
ST1086STEEL COMP 1086
ST1090STEEL COMP 1090
ST1095STEEL COMP 1095
ST1108STEEL COMP 1108
ST1109STEEL COMP 1109
ST1110STEEL COMP 1110
ST1115STEEL COMP 1115
ST1116STEEL COMP 1116
ST1117STEEL COMP 1117
ST1118STEEL COMP 1118
ST1119STEEL COMP 1119
ST1120STEEL COMP 1120
ST1125STEEL COMP 1125
ST1126STEEL COMP 1126
ST1132STEEL COMP 1132
ST1137STEEL COMP 1137
ST1138STEEL COMP 1138
ST1139STEEL COMP 1139
ST1140STEEL COMP 1140
ST1141STEEL COMP 1141
ST1144STEEL COMP 1144
ST1145STEEL COMP 1145
ST1146STEEL COMP 1146
ST1151STEEL COMP 1151
ST0520STEEL COMP 120-95
ST1211STEEL COMP 1211
ST1212STEEL COMP 1212
ST1213STEEL COMP 1213
ST1215STEEL COMP 1215
ST0063STEEL COMP 12L14
ST1340STEEL COMP 1340
ST0067STEEL COMP 1340H
ST1345STEEL COMP 1345
ST0531STEEL COMP 150-125
ST1524STEEL COMP 1524
ST1527STEEL COMP 1527
ST1536STEEL COMP 1536
ST1541STEEL COMP 1541
ST1551STEEL COMP 1551
ST1552STEEL COMP 1552
ST1566STEEL COMP 1566
ST1572STEEL COMP 1572
ST0572STEEL COMP 175-145
ST0202STEEL COMP 202
ST0159STEEL COMP 203EZ
ST0301STEEL COMP 301
ST0302STEEL COMP 302
ST0180STEEL COMP 302B
ST0303STEEL COMP 303
ST0166STEEL COMP 303 PLUS X
ST0157STEEL COMP 303CU
ST0165STEEL COMP 303MA
ST0158STEEL COMP 303PB
ST0079STEEL COMP 303SE
ST0304STEEL COMP 304
ST0448STEEL COMP 304H
ST0080STEEL COMP 304L
ST0449STEEL COMP 304N
ST0305STEEL COMP 305
ST0152STEEL COMP 308
ST0309STEEL COMP 309
ST0153STEEL COMP 309S
ST0492STEEL COMP 309S-CB
ST0310STEEL COMP 310
ST0154STEEL COMP 310S
ST0155STEEL COMP 314
ST0316STEEL COMP 316
ST0354STEEL COMP 316F
ST0450STEEL COMP 316H
ST0082STEEL COMP 316L
ST0451STEEL COMP 316N
ST0317STEEL COMP 317
ST0254STEEL COMP 317L
ST0321STEEL COMP 321
ST0452STEEL COMP 321H
ST0322STEEL COMP 322
ST0323STEEL COMP 323
ST0324STEEL COMP 324
ST0616STEEL COMP 325
ST0617STEEL COMP 330
ST0618STEEL COMP 330A
ST0347STEEL COMP 347
ST0453STEEL COMP 347H
ST0348STEEL COMP 348
ST0640STEEL COMP 348H
ST0384STEEL COMP 384
ST0385STEEL COMP 385
ST0403STEEL COMP 403
ST4032STEEL COMP 4032
ST0086STEEL COMP 4042H
ST4047STEEL COMP 4047
ST0405STEEL COMP 405
ST4063STEEL COMP 4063
ST0410STEEL COMP 410
ST4137STEEL COMP 4137
ST0414STEEL COMP 414
ST4140STEEL COMP 4140
ST4142STEEL COMP 4142
ST0416STEEL COMP 416
ST0255STEEL COMP 416 PLUS X
ST0099STEEL COMP 416SE
ST0420STEEL COMP 420
ST0430STEEL COMP 430
ST0172STEEL COMP 430FSE
ST0431STEEL COMP 431
ST0105STEEL COMP 440A
ST0106STEEL COMP 440B
ST0107STEEL COMP 440C
ST0108STEEL COMP 440F
ST0285STEEL COMP 440FSE
ST0446STEEL COMP 446
ST4620STEEL COMP 4620
ST0109STEEL COMP 4620H
ST4621STEEL COMP 4621
ST4640STEEL COMP 4640
ST0466STEEL COMP 4640H
ST4718STEEL COMP 4718
ST0114STEEL COMP 50B60
ST5120STEEL COMP 5120
ST0117STEEL COMP 5120H
ST5132STEEL COMP 5132
ST0119STEEL COMP 5132H
ST5155STEEL COMP 5155
ST0555STEEL COMP 60-30
ST6150STEEL COMP 6150
ST0630STEEL COMP 630
ST0633STEEL COMP 633
ST0634STEEL COMP 634
ST0134STEEL COMP 80-50
ST0173STEEL COMP 81B45
ST0138STEEL COMP 8622H
ST8630STEEL COMP 8630
ST8637STEEL COMP 8637
ST8640STEEL COMP 8640
ST8645STEEL COMP 8645
ST8650STEEL COMP 8650
ST8740STEEL COMP 8740
ST0147STEEL COMP 8740H
ST0184STEEL COMP 90-60
ST0454STEEL COMP 94B15
ST0170STEEL COMP 94B30
ST9850STEEL COMP 9850
ST0026STEEL COMP E3310
ST0028STEEL COMP E4340
ST0213STEEL COMP E51100
ST0046STEEL COMP MT1010
ST0047STEEL COMP MT1015
ST0048STEEL COMP MT1020
ST0049STEEL COMP MTX1015
ST0050STEEL COMP MTX1020
ST0291STEEL COMP O1
ST0306STEEL COMP W209
ST0307STEEL COMP W210
ST0308STEEL COMP W214
ST0704STEEL COMP XM-12
ST9851STEEL COMP XM-34
STB000STEEL CORROSION RESISTING
ST0586STEEL UNS J03001
ST1593STEEL UNS J03007
ST0602STEEL UNS J03009
ST0587STEEL UNS J03501
ST0603STEEL UNS J03504
ST1594STEEL UNS J04000
ST0575STEEL UNS J04501
ST1598STEEL UNS J05002
ST1827STEEL UNS J32075
ST0567STEEL UNS J91150
ST0623STEEL UNS J92650
ST1776STEEL UNS J92810
ST0668STEEL UNS K08500
ST0533STEEL UNS K32550
ST0628STEEL UNS S34720
ST0629STEEL UNS S34723
STG001STEEL, WROUGHT
WDC000WOOD
WDJ000WOOD, BIRCH
WDE000WOOD, WALNUT
ZNB000ZINC
ZNA000ZINC ALLOY
ZN0003ZINC ALLOY 903
ZN0004ZINC ALLOY 925
ZN0015ZINC ALLOY UNS Z33520
ZN0016ZINC ALLOY UNS Z33521
ZN0018ZINC ALLOY UNS Z35531
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDCMA000*;SFTTDNLA000$DDCA000*;SFTTDNLA000$$DDCA000*)
Table 1
Reply Code (SF01)Reply
ANA000ANODIZE
CDA000CADMIUM
CMA000CHROMATE
CMB000CHROMATE ZINC
CRA000CHROMIUM
CUA000COPPER
CUB000COPPER ALLOY
DCA000DICHROMATE
DCB000DICHROMATE POTASSIUM
ENA000ENAMEL
END000ENAMEL BAKED
ENE000ENAMEL GLOSS
ENB000ENAMEL LUSTERLESS
ENF000ENAMEL SEMIGLOSS
FRS000FROSTED
LQA000LACQUER
LQD000LACQUER ACRYLIC
NLA000NICKEL
XXB000OXIDE
PNA000PAINT
PSA000PASSIVATE
PHA000PHOSPHATE
PHB000PHOSPHATE IRON
PHD000PHOSPHATE ZINC
PCK000PLASTIC ACRYLIC
PCS000PLASTIC EPOXY
PCF000PLASTIC POLYAMIDE
PCD000PLASTIC PYROXYLIN
PRA000PRIMER
AGA000SILVER
SNA000TIN
VAA000VARNISH
ZNA000ZINC
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3BDVDPK0000*;HUES3BDVDPK0000$DBR0000*;HUES3BDVDPK0000$$DBR0000*)
Table 1
ISAC Field Indicator (5000)Location
3AEEOVERALL
3BDVGRIP
3HOULOCATION NOT OTHERWISE SPECIFIED
Table 2
Reply Code (AD06)Reply
BL0000BLACK
BL0036BLACK, DULL
BU0000BLUE
BR0000BROWN
CL0000CLEAR
MS0096FROSTED
GL0000GOLD
GY0000GRAY/GREY
GR0000GREEN
MA0000MAROON
NA0000NATURAL
LD0000OLIVE DRAB
RG0000ORANGE
PK0000PINK
RE0000RED
RE0010RED, BROWNISH
RU0000RUSSET
RU0003RUSSET BROWN
SL0000SILVER
WH0000WHITE
WH0032WHITE, LUMINOUS
YE0000YELLOW
IF STYLE/REPLY CODE(s) H17 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLH17)
Table 1
Physical Drawing IDReply Code (STYL)Reply
CA10153H17ELECTRODE-ELECTRO-SURGERY
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAB2.0*;ABHPJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
ANEH*DDESIGN DESIGNATION
THE DESIGNATION DERIVED FROM THE NAME OF THE DESIGNER OR USE FOR WHICH THE ITEM IS INTENDED.
Enter the applicable reply code from the table below
(ANEHDAJE)
Table 1
Reply Code (AJ50)Reply
BXCBILL
CDBGIGLI
AJEUNIVERSAL
SFCD*DSURFACE CONDITION
THE CONDITION OF THE ITEM WITH RESPECT TO THE TEXTURE OF THE SURFACE.
Enter the applicable reply code from the table below
(SFCDDSM)
Table 1
Reply Code (AN72)Reply
FLFLUTED
SMSMOOTH
ATYC*DSIZE
AN INDICATION OF THE SIZE OF THE ITEM.
Enter the applicable reply code from the table below
(ATYCDATS)
Table 1
Reply Code (AF81)Reply
CWCCOMMERCIAL EXTRA LONG
CWDCOMMERCIAL LARGE
CWECOMMERCIAL MEDIUM
CWFCOMMERCIAL SMALL
ATJLARGE
ATNMEDIUM
ATSSMALL
CCCY*DINSTRUMENT ATTACHMENT METHOD
THE MEANS BY WHICH THE INSTRUMENT IS ATTACHED TO THE ITEM.
Enter the applicable reply code from the table below
(CCCYDNX)
Table 1
Reply Code (AB47)Reply
NSBALL SOCKET-SADDLE LATCH
NTCHUCK
NWCOLLET
NXINTERNALLY THREADED CONE SOCKET
NYPRONGS
CCDG*JOVERALL WIDTH ACROSS FLATS
THE OVERALL MEASUREMENT FROM ONE FLATTED SURFACE TO THE OPPOSITE FLATTED SURFACE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCDGJAB2.0*;CCDGJAB2.0$$JAB2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CCDH*JELECTRODE SHANK LENGTH ACCOMMODATED
A MEASUREMENT OF THE LONGEST DIMENSION OF THE ELECTRODE SHANK THAT THE ITEM IS DESIGNED TO ACCOMMODATE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCDHJAC2.0*;CCDHJAC2.0$$JAC2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CCDJ*JELECTRODE SHANK DIAMETER ACCOMMODATED
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATION FOR THE ELECTRODE SHANK,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCDJJAA2.0*;CCDJJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CCDK*JELECTRODE SHANK CENTER TO CENTER DISTANCE ACCOMMODATED
THE CENTER TO CENTER DISTANCE OF THE ELECTRODE SHANK THAT THE ITEM IS DESIGNED TO ACCOMMODATE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CCDKJAA2.0*;CCDKJAA2.0$$JAA2.1*)
Table 1
Reply Code (AA05)Reply
AINCHES
LMILLIMETERS
Table 2
Reply Code (AC20)Reply
ANOMINAL
BMINIMUM
CMAXIMUM
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAXP*;CBBLDDCC$$DDCS*)
Table 1
Reply Code (AN47)Reply
BZPBOLT
BGHBRACKET
AFPCOTTER PIN
BKRELECTRICALLY INSULATED
DCCESCUTCHEON PLATE
DCDESCUTCHEON PLATE FIXED
DCEESCUTCHEON PLATE MOVABLE
AFRFERRULE
DCFFLUTED SURFACE
AXPFRAME
DCGHANDLE COUNTERBALANCING WEIGHT
APHHANDLE LOCK
DCHHANDLE ROTATING FEATURE
DCJINSERT
DCKLOCK ACCOMMODATION
DCLLOCK COVER
BBLLOCKNUT
DCMLOOSE KEY
DCNLUBRICATED
BKSMANUAL TOOL
DCPMARKING PROVISION
DCQMETAL CORE
DCRMOUNTING DEVICE
DCSMOUNTING PLATE
BKWNONMAGNETIC
DCTNONRECHARGEABLE
AHJNONSPARKING
AFZNUT
DCVPENCIL
DCWPIN
DCXPISTOL GRIP
DCYRECHARGEABLE
CYSRIVET
AGCSCREW
DCZSELF-LUBRICATING
DDASINGLE-EDGED
DDBSMOOTH SURFACE
CDKSTRAIGHT
EVJSTRAIGHT END
DCUSTUD NUT
EVKTAPERED END
DDCTHERMAL INSULATION
BEQWASHER
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
Table 1
Reply Code (AC28)Reply
ASPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
BSTANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
CDRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
Table 1
Reply Code (AN62)Reply
VFEDERAL MOTOR VEHICLE SAFETY STANDARD
FFLAMMABILITY STANDARD
SGOVERNMENT SPECIFICATION
TGOVERNMENT STANDARD
UINTERNATIONAL STD/SPEC
DMANUFACTURERS SOURCE CONTROL
RMANUFACTURERS SPECIFICATION
NMANUFACTURERS SPECIFICATION CONTROL
MMANUFACTURERS STANDARD
BNATIONAL STD/SPEC
APROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION
PPROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
Table 1
Reply Code (AD08)Reply
ALALLOY
BEANNEALED
ANANNEX
APAPPENDIX
ACAPPLICABILITY CLASS
ARARRANGEMENT
ASASSEMBLY
ABASSORTMENT
BFBOND
BXBOX
CYCAPACITY
CACASE
CTCATEGORY
CFCIRCUMFERENCE
CLCLASS
CECODE
CRCOLOR
CCCOMBINATION CODE
CNCOMPONENT
CPCOMPOSITION
CMCOMPOUND
CDCONDITION
AVCONFIGURATION
CSCONSTRUCTION
BGCORE CONDITION
CBCUT OFF
AMDELAY CLASS
DEDESIGN
DGDESIGNATOR
DWDRAWING NUMBER
DUDUPLEX
EGEDGE
ENEND
FYFAMILY
FGFIGURE
AKFILE NUMBER
FNFINISH
FBFLAVOR
BHFLUX PERCENTAGE
FMFORM
FAFORMULA
AJGAGE STOCK NUMBER
GRGRADE
GAGRADUATION
AXGRANULES
AYGRIT
GBGROUND
GPGROUP
HAHEAVY DUTY
BAIMAGE COLOR
NSINSERT
TMITEM
KDKIND
KTKIT
LGLENGTH
LVLEVEL
LTLIMIT
MKMARK
AAMARKER
ADMASK APERTURE
MLMATERIAL
BBMAXIMUM DENSITY
TAMEDIUM TEMPER
MHMESH
MEMETHOD
BCMINIMUM DENSITY
MDMODEL
MTMOUNTING
AQNATURAL
AUNON-DELAY CLASS
NRNUMBER
BLOUTFIT NUMBER
PAPARAGRAPH
PTPART
PNPATTERN
PCPHYSICAL CONDITION
PSPIECE
PLPLAN
PRPOINT
PDPOLISHED
PBPRESSURE RATING
QAQUALITY
QBQUENCHED
RNRANGE
AERAPID
RTRATING
RFREFERENCE NUMBER
RAREGULAR DUTY
BJRMA FLUX
SJSALIENT CHARACTERISTICS
SCSCHEDULE
SBSECTION
SLSELECTION
BDSERIALIZED
SESERIES
SVSERVICE
SXSET
SASHADE
SHSHAPE
SGSHEET
SZSIZE
AGSLOW
TCSOFT TEMPER
SKSOURCE
PZSPECIES
SQSPECIFICATION SHEET
SDSPEED
AWSTANDARD
SRSTRAIGHT
STSTYLE
SSSUBCLASS
SFSUBFORM
SPSUBTYPE
BKSUPPORT
SNSURFACE CONDITION
SYSYMBOL
SMSYSTEM
TBTABLE
TNTANNAGE
TPTEMPER
TXTEXTURE
TKTHICKNESS
TTTREATMENT
TRTRIM
TYTYPE
YNUNIT
AZUNSERIALIZED
VAVARIETY
WTWEIGHT
WDWIDTH
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
Table 1
Reply Code (AN58)Reply
AADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ABSP*DREFERENCE MARKING
A VISIBLE TRACING OR IMPRESSION,AND THE LIKE,OF ALPHA AND/OR NUMERIC CHARACTERS,SYMBOLS,AND THE LIKE.
Enter the applicable reply code from the table below
(ABSPDAE*;ABSPDSK$$DTW*)
Table 1
Reply Code (AB44)Reply
ETAILERON TAB RT DOWN-ARROW CW
ASARROW/CCW
ARARROW/CW
DEC
SGCOLD
KCDEP-ARROW CCW
QZDISENGAGED PULL
MRELEV-ARROW CW
QYENGAGED PUSH
GMH
SHHOT
SMINDEX MARK
TWLAVATORY DRAIN
AMLOCK CLOSED/ARROW/CW
STLOCKED-ARROW CW
SKLOW STEAM PRESSURE
CLOPEN
AFOPEN/ARROW/CCW
AEOPEN/ARROW/CW
AGOPEN/CLOSED/ARROW/CW
MLPULL TO TURN
GZPULL TO UNLOCK
TDPUSH TO LOCK
TEPUSH TO TRACK
SNSTOP VALVE
SQTHROTTLE FRICTION
SZUNLOCKED-ARROW CCW
AGUC*AUNIT PACKAGE QUANTITY
THE NUMBER OF ITEMS CONTAINED IN THE UNIT PACKAGE.
Enter the numeric reply with a minimum of one digit.
(AGUCA10*)
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDPTA000*;PRMTDPDA000$DIRA000*;PRMTDPDA000$$DIRA000*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
PMWT*JPRECIOUS MATERIAL AND WEIGHT
AN INDICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM,AND THE AMOUNT PER A MEASUREMENT SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PMWTJRHA000R2.0*;PMWTJRHA000R2.0$$JRHA000R2.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
Table 2
Reply Code (AG14)Reply
EGRAINS, TROY
RGRAMS
FOUNCES, TROY
PMLC*JPRECIOUS MATERIAL AND LOCATION
AN INDICATION OF THE PRECIOUS MATERIAL AND ITS LOCATION IN THE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(PMLCJIRA0002.0*;PMLCJIRA0002.0$JIRA0002.0*;PMLCJIRA0002.0$$JIRA0002.1*)
Table 1
Reply Code (MA01)Reply
AUA000GOLD
IRA000IRIDIUM
AZA000OSMIUM
PDA000PALLADIUM
PTA000PLATINUM
RHA000RHODIUM
RTA000RUTHENIUM
AGA000SILVER
SUCB*JUNIT OF ISSUE CUBE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF THE UNIT OF ISSUE AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(SUCBJCM2.0*)
Table 1
Reply Code (AN76)Reply
CFCUBIC FEET
CMCUBIC METERS
EXME*JEXTERIOR CONTAINER CUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF THE EXTERIOR CONTAINER AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(EXMEJCF2.0*)
Table 1
Reply Code (AN76)Reply
CFCUBIC FEET
CMCUBIC METERS
PKQT*AINTERMEDIATE PACKAGE QUANTITY
THE NUMBER OF WRAPS,BOXES,OR BUNDLES,WHICH CONTAINS TWO OR MORE UNITS OF ISSUE,PLACED INSIDE AN EXTERIOR CONTAINER.
Enter the numeric reply with a minimum of one digit.
(PKQTA10*)
EXQT*AEXTERIOR CONTAINER QUANTITY
THE NUMBER OF UNITS OF ISSUE PLACED INSIDE THE EXTERIOR CONTAINER. PLEASE USE MRC NMBR WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the numeric reply with a minimum of one digit.
(EXQTA10*)
ECWT*JEXTERIOR CONTAINER WEIGHT
THE MEASURED WEIGHT OF THE EXTERIOR CONTAINER. PLEASE USE MRC AJWK WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ECWTJLB2.0*)
Table 1
Reply Code (AN75)Reply
KGKILOGRAMS
LBPOUNDS
SUWT*JUNIT OF ISSUE WEIGHT
THE MEASURED WEIGHT OF THE ACTUAL CONTAINER(S) OR SUPPORTING DEVICE(S) WHICH IS IN DIRECT CONTACT WITH THE ITEM AND ITS CONTENTS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(SUWTJLB2.0*)
Table 1
Reply Code (AN75)Reply
KGKILOGRAMS
LBPOUNDS
PKTY*DUNIT PACKAGE TYPE
INDICATES THE TYPE OF CONTAINER IN WHICH THE ITEM OF SUPPLY IS PACKAGED. PLEASE USE MRC ALQG IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable reply code from the table below
(PKTYDACD)
Table 1
Reply Code (AN65)Reply
AAHBAG
ACDBOX
ACXCARTON
ADDCASE
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)