An instrument designed to register and total numerically the movements of a ratchet, actuated by means of a reciprocating lever or plunger. It may have a fixed type mounting or designed to be hand held. Excludes:NUMBERING MACHINE (as modified).
ISAC Reply 3AEE added to MRC AXED.
ISAC Reply 3CWB added to MRC AXED.
ISAC Reply 3CWF added to MRC AXED.
ISAC Reply 3CWU added to MRC AXED.
ISAC Reply 3HOU added to MRC AXED.
ISAC Reply 1A deleted from MRC AXED.
ISAC Reply 1B deleted from MRC AXED.
ISAC Reply 1C deleted from MRC AXED.
ISAC Reply 1D deleted from MRC AXED.
ISAC Reply 1E deleted from MRC AXED.
ISAC Reply 1F deleted from MRC AXED.
ISAC Reply 1G deleted from MRC AXED.
ISAC Reply 1H deleted from MRC AXED.
ISAC Reply 1J deleted from MRC AXED.
ISAC Reply 1K deleted from MRC AXED.
ISAC Reply 1L deleted from MRC AXED.
ISAC Reply 1M deleted from MRC AXED.
ISAC Reply 1X deleted from MRC AXED.
ISAC Reply 1A deleted from MRC AXED.
ISAC Reply 1B deleted from MRC AXED.
ISAC Reply 1C deleted from MRC AXED.
ISAC Reply 1D deleted from MRC AXED.
ISAC Reply 1E deleted from MRC AXED.
ISAC Reply 1F deleted from MRC AXED.
ISAC Reply 1G deleted from MRC AXED.
ISAC Reply 1H deleted from MRC AXED.
ISAC Reply 1J deleted from MRC AXED.
ISAC Reply 1K deleted from MRC AXED.
ISAC Reply 1L deleted from MRC AXED.
ISAC Reply 1M deleted from MRC AXED.
ISAC Reply 1X deleted from MRC AXED.
ISAC Reply 1Y deleted from MRC AXED.
ISAC Reply 3AEE added to MRC ANQS.
ISAC Reply 3CWB added to MRC ANQS.
ISAC Reply 3CWE added to MRC ANQS.
ISAC Reply 3CWF added to MRC ANQS.
ISAC Reply 3CWG added to MRC ANQS.
ISAC Reply 3CWL added to MRC ANQS.
ISAC Reply 3CWU added to MRC ANQS.
ISAC Reply 3CWV added to MRC ANQS.
ISAC Reply 3HOU added to MRC ANQS.
ISAC Reply 1A deleted from MRC ANQS.
ISAC Reply 1B deleted from MRC ANQS.
ISAC Reply 1C deleted from MRC ANQS.
ISAC Reply 1D deleted from MRC ANQS.
ISAC Reply 1E deleted from MRC ANQS.
ISAC Reply 1F deleted from MRC ANQS.
ISAC Reply 1G deleted from MRC ANQS.
ISAC Reply 1H deleted from MRC ANQS.
ISAC Reply 1J deleted from MRC ANQS.
ISAC Reply 1K deleted from MRC ANQS.
ISAC Reply 1L deleted from MRC ANQS.
ISAC Reply 1M deleted from MRC ANQS.
ISAC Reply 1X deleted from MRC ANQS.
ISAC Reply 1A deleted from MRC ANQS.
ISAC Reply 1B deleted from MRC ANQS.
ISAC Reply 1C deleted from MRC ANQS.
ISAC Reply 1D deleted from MRC ANQS.
ISAC Reply 1E deleted from MRC ANQS.
ISAC Reply 1F deleted from MRC ANQS.
ISAC Reply 1G deleted from MRC ANQS.
ISAC Reply 1H deleted from MRC ANQS.
ISAC Reply 1J deleted from MRC ANQS.
ISAC Reply 1K deleted from MRC ANQS.
ISAC Reply 1L deleted from MRC ANQS.
ISAC Reply 1M deleted from MRC ANQS.
ISAC Reply 1X deleted from MRC ANQS.
ISAC Reply 1Y deleted from MRC ANQS.
ISAC Reply 3AEE added to MRC BCNX.
ISAC Reply 3CWF added to MRC BCNX.
ISAC Reply 3HOU added to MRC BCNX.
ISAC Reply 1A deleted from MRC BCNX.
ISAC Reply 1B deleted from MRC BCNX.
ISAC Reply 1C deleted from MRC BCNX.
ISAC Reply 1D deleted from MRC BCNX.
ISAC Reply 1E deleted from MRC BCNX.
ISAC Reply 1F deleted from MRC BCNX.
ISAC Reply 1G deleted from MRC BCNX.
ISAC Reply 1H deleted from MRC BCNX.
ISAC Reply 1J deleted from MRC BCNX.
ISAC Reply 1K deleted from MRC BCNX.
ISAC Reply 1L deleted from MRC BCNX.
ISAC Reply 1M deleted from MRC BCNX.
ISAC Reply 1X deleted from MRC BCNX.
ISAC Reply 1A deleted from MRC BCNX.
ISAC Reply 1B deleted from MRC BCNX.
ISAC Reply 1C deleted from MRC BCNX.
ISAC Reply 1D deleted from MRC BCNX.
ISAC Reply 1E deleted from MRC BCNX.
ISAC Reply 1F deleted from MRC BCNX.
ISAC Reply 1G deleted from MRC BCNX.
ISAC Reply 1H deleted from MRC BCNX.
ISAC Reply 1J deleted from MRC BCNX.
ISAC Reply 1K deleted from MRC BCNX.
ISAC Reply 1L deleted from MRC BCNX.
ISAC Reply 1M deleted from MRC BCNX.
ISAC Reply 1X deleted from MRC BCNX.
ISAC Reply 1Y deleted from MRC BCNX.
ISAC Reply 3AEE added to MRC ANRC.
ISAC Reply 3CWF added to MRC ANRC.
ISAC Reply 3HOU added to MRC ANRC.
ISAC Reply 1A deleted from MRC ANRC.
ISAC Reply 1B deleted from MRC ANRC.
ISAC Reply 1C deleted from MRC ANRC.
ISAC Reply 1D deleted from MRC ANRC.
ISAC Reply 1E deleted from MRC ANRC.
ISAC Reply 1F deleted from MRC ANRC.
ISAC Reply 1G deleted from MRC ANRC.
ISAC Reply 1H deleted from MRC ANRC.
ISAC Reply 1J deleted from MRC ANRC.
ISAC Reply 1K deleted from MRC ANRC.
ISAC Reply 1L deleted from MRC ANRC.
ISAC Reply 1M deleted from MRC ANRC.
ISAC Reply 1X deleted from MRC ANRC.
ISAC Reply 1A deleted from MRC ANRC.
ISAC Reply 1B deleted from MRC ANRC.
ISAC Reply 1C deleted from MRC ANRC.
ISAC Reply 1D deleted from MRC ANRC.
ISAC Reply 1E deleted from MRC ANRC.
ISAC Reply 1F deleted from MRC ANRC.
ISAC Reply 1G deleted from MRC ANRC.
ISAC Reply 1H deleted from MRC ANRC.
ISAC Reply 1J deleted from MRC ANRC.
ISAC Reply 1K deleted from MRC ANRC.
ISAC Reply 1L deleted from MRC ANRC.
ISAC Reply 1M deleted from MRC ANRC.
ISAC Reply 1X deleted from MRC ANRC.
ISAC Reply 1Y deleted from MRC ANRC.
ISAC Reply 3AEE added to MRC ANRE.
ISAC Reply 3CWF added to MRC ANRE.
ISAC Reply 3HOU added to MRC ANRE.
ISAC Reply 1A deleted from MRC ANRE.
ISAC Reply 1B deleted from MRC ANRE.
ISAC Reply 1C deleted from MRC ANRE.
ISAC Reply 1D deleted from MRC ANRE.
ISAC Reply 1E deleted from MRC ANRE.
ISAC Reply 1F deleted from MRC ANRE.
ISAC Reply 1G deleted from MRC ANRE.
ISAC Reply 1H deleted from MRC ANRE.
ISAC Reply 1J deleted from MRC ANRE.
ISAC Reply 1K deleted from MRC ANRE.
ISAC Reply 1L deleted from MRC ANRE.
ISAC Reply 1M deleted from MRC ANRE.
ISAC Reply 1X deleted from MRC ANRE.
ISAC Reply 1A deleted from MRC ANRE.
ISAC Reply 1B deleted from MRC ANRE.
ISAC Reply 1C deleted from MRC ANRE.
ISAC Reply 1D deleted from MRC ANRE.
ISAC Reply 1E deleted from MRC ANRE.
ISAC Reply 1F deleted from MRC ANRE.
ISAC Reply 1G deleted from MRC ANRE.
ISAC Reply 1H deleted from MRC ANRE.
ISAC Reply 1J deleted from MRC ANRE.
ISAC Reply 1K deleted from MRC ANRE.
ISAC Reply 1L deleted from MRC ANRE.
ISAC Reply 1M deleted from MRC ANRE.
ISAC Reply 1X deleted from MRC ANRE.
ISAC Reply 1Y deleted from MRC ANRE.
ISAC Reply 3AEE added to MRC CSWT.
ISAC Reply 3CWF added to MRC CSWT.
ISAC Reply 3HOU added to MRC CSWT.
ISAC Reply 1A deleted from MRC CSWT.
ISAC Reply 1B deleted from MRC CSWT.
ISAC Reply 1C deleted from MRC CSWT.
ISAC Reply 1D deleted from MRC CSWT.
ISAC Reply 1E deleted from MRC CSWT.
ISAC Reply 1F deleted from MRC CSWT.
ISAC Reply 1G deleted from MRC CSWT.
ISAC Reply 1H deleted from MRC CSWT.
ISAC Reply 1J deleted from MRC CSWT.
ISAC Reply 1K deleted from MRC CSWT.
ISAC Reply 1L deleted from MRC CSWT.
ISAC Reply 1M deleted from MRC CSWT.
ISAC Reply 1X deleted from MRC CSWT.
ISAC Reply 1A deleted from MRC CSWT.
ISAC Reply 1B deleted from MRC CSWT.
ISAC Reply 1C deleted from MRC CSWT.
ISAC Reply 1D deleted from MRC CSWT.
ISAC Reply 1E deleted from MRC CSWT.
ISAC Reply 1F deleted from MRC CSWT.
ISAC Reply 1G deleted from MRC CSWT.
ISAC Reply 1H deleted from MRC CSWT.
ISAC Reply 1J deleted from MRC CSWT.
ISAC Reply 1K deleted from MRC CSWT.
ISAC Reply 1L deleted from MRC CSWT.
ISAC Reply 1M deleted from MRC CSWT.
ISAC Reply 1X deleted from MRC CSWT.
ISAC Reply 1Y deleted from MRC CSWT.
ISAC Reply 3AEE added to MRC AXEC.
ISAC Reply 3CWF added to MRC AXEC.
ISAC Reply 3CWU added to MRC AXEC.
ISAC Reply 3CWV added to MRC AXEC.
ISAC Reply 3HOU added to MRC AXEC.
ISAC Reply 1A deleted from MRC AXEC.
ISAC Reply 1B deleted from MRC AXEC.
ISAC Reply 1C deleted from MRC AXEC.
ISAC Reply 1D deleted from MRC AXEC.
ISAC Reply 1E deleted from MRC AXEC.
ISAC Reply 1F deleted from MRC AXEC.
ISAC Reply 1G deleted from MRC AXEC.
ISAC Reply 1H deleted from MRC AXEC.
ISAC Reply 1J deleted from MRC AXEC.
ISAC Reply 1K deleted from MRC AXEC.
ISAC Reply 1L deleted from MRC AXEC.
ISAC Reply 1M deleted from MRC AXEC.
ISAC Reply 1X deleted from MRC AXEC.
ISAC Reply 1A deleted from MRC AXEC.
ISAC Reply 1B deleted from MRC AXEC.
ISAC Reply 1C deleted from MRC AXEC.
ISAC Reply 1D deleted from MRC AXEC.
ISAC Reply 1E deleted from MRC AXEC.
ISAC Reply 1F deleted from MRC AXEC.
ISAC Reply 1G deleted from MRC AXEC.
ISAC Reply 1H deleted from MRC AXEC.
ISAC Reply 1J deleted from MRC AXEC.
ISAC Reply 1K deleted from MRC AXEC.
ISAC Reply 1L deleted from MRC AXEC.
ISAC Reply 1M deleted from MRC AXEC.
ISAC Reply 1X deleted from MRC AXEC.
ISAC Reply 1Y deleted from MRC AXEC.
ISAC Reply 3AEE added to MRC ANQT.
ISAC Reply 3CWF added to MRC ANQT.
ISAC Reply 3CWU added to MRC ANQT.
ISAC Reply 3CWV added to MRC ANQT.
ISAC Reply 3HOU added to MRC ANQT.
ISAC Reply 1A deleted from MRC ANQT.
ISAC Reply 1B deleted from MRC ANQT.
ISAC Reply 1C deleted from MRC ANQT.
ISAC Reply 1D deleted from MRC ANQT.
ISAC Reply 1E deleted from MRC ANQT.
ISAC Reply 1F deleted from MRC ANQT.
ISAC Reply 1G deleted from MRC ANQT.
ISAC Reply 1H deleted from MRC ANQT.
ISAC Reply 1J deleted from MRC ANQT.
ISAC Reply 1K deleted from MRC ANQT.
ISAC Reply 1L deleted from MRC ANQT.
ISAC Reply 1M deleted from MRC ANQT.
ISAC Reply 1X deleted from MRC ANQT.
ISAC Reply 1A deleted from MRC ANQT.
ISAC Reply 1B deleted from MRC ANQT.
ISAC Reply 1C deleted from MRC ANQT.
ISAC Reply 1D deleted from MRC ANQT.
ISAC Reply 1E deleted from MRC ANQT.
ISAC Reply 1F deleted from MRC ANQT.
ISAC Reply 1G deleted from MRC ANQT.
ISAC Reply 1H deleted from MRC ANQT.
ISAC Reply 1J deleted from MRC ANQT.
ISAC Reply 1K deleted from MRC ANQT.
ISAC Reply 1L deleted from MRC ANQT.
ISAC Reply 1M deleted from MRC ANQT.
ISAC Reply 1X deleted from MRC ANQT.
ISAC Reply 1Y deleted from MRC ANQT.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3CXE added to MRC HUES.
ISAC Reply 3CXF added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
ISAC Reply 1E deleted from MRC HUES.
ISAC Reply 1F deleted from MRC HUES.
ISAC Reply 1G deleted from MRC HUES.
ISAC Reply 1H deleted from MRC HUES.
ISAC Reply 1J deleted from MRC HUES.
ISAC Reply 1K deleted from MRC HUES.
ISAC Reply 1L deleted from MRC HUES.
ISAC Reply 1M deleted from MRC HUES.
ISAC Reply 1N deleted from MRC HUES.
ISAC Reply 1X deleted from MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
ISAC Reply 1E deleted from MRC HUES.
ISAC Reply 1F deleted from MRC HUES.
ISAC Reply 1G deleted from MRC HUES.
ISAC Reply 1H deleted from MRC HUES.
ISAC Reply 1J deleted from MRC HUES.
ISAC Reply 1K deleted from MRC HUES.
ISAC Reply 1L deleted from MRC HUES.
ISAC Reply 1M deleted from MRC HUES.
ISAC Reply 1X deleted from MRC HUES.
ISAC Reply 1Y deleted from MRC HUES.
ISAC Reply 1A deleted from MRC HUES.
ISAC Reply 1B deleted from MRC HUES.
ISAC Reply 1C deleted from MRC HUES.
ISAC Reply 1D deleted from MRC HUES.
ISAC Reply 1E deleted from MRC HUES.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED30761*)
ANQDAREGISTER QUANTITY
THE NUMBER OF REGISTER(S) CONTAINED IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ANQDA10*)
AXEDDREGISTER FUNCTION
THE MATHEMATICAL FUNCTION THE REGISTER/S/ IS DESIGNED TO PERFORM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AXED3CWBDAB*;AXED3CWBDAB$DAC*;AXED3CWBDAB$$DAC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CWB | SINGLE REGISTER FIRST TIER |
| 3CWF | SINGLE REGISTER SINGLE TIER |
| 3CWU | ALL REGISTERS ALL TIERS |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AM53) | Reply |
| AB | ADD |
| AC | SUBTRACT |
ANQSAFIGURE QUANTITY PER REGISTER
THE NUMBER OF DIGITS DISPLAYED ON EACH REGISTER OF THE ITEM.
Enter the applicable ISAC from the table below followed by the mode code, followed by a numeric reply with a minimum of one digit.
(ANQS3CWVA10)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CWB | SINGLE REGISTER FIRST TIER |
| 3CWE | SINGLE REGISTER ALL TIERS |
| 3CWF | SINGLE REGISTER SINGLE TIER |
| 3CWG | FIRST REGISTER FIRST TIER |
| 3CWL | SECOND REGISTER SECOND TIER |
| 3CWU | ALL REGISTERS ALL TIERS |
| 3CWV | ALL REGISTERS SINGLE TIER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
AXEGDACTUATING DEVICE LOCATION
INDICATES THE LOCATION OF THE ACTUATING DEVICE ON THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AXEG2CFDAQH)
| Table 1 |
| ISAC Field Indicator (0227) | Location |
| 2AA | SINGLE REGISTER 1ST TIER |
| 2AB | SINGLE REGISTER 2ND TIER |
| 2AC | SINGLE REGISTER 3RD TIER |
| 2AD | SINGLE REGISTER 4TH TIER |
| 2AE | SINGLE REGISTER 5TH TIER |
| 2AF | SINGLE REGISTER 6TH TIER |
| 2AG | SINGLE REGISTER 7TH TIER |
| 2AH | SINGLE REGISTER 8TH TIER |
| 2AJ | SINGLE REGISTER 9TH TIER |
| 2AK | SINGLE REGISTER 10TH TIER |
| 2AL | SINGLE REGISTER 11TH TIER |
| 2AM | SINGLE REGISTER 12TH TIER |
| 2AX | SINGLE REGISTER ALL TIERS |
| 2AY | SINGLE REGISTER SINGLE TIER |
| 2BA | 1ST REGISTER 1ST TIER |
| 2BB | 1ST REGISTER 2ND TIER |
| 2BC | 1ST REGISTER 3RD TIER |
| 2BD | 1ST REGISTER 4TH TIER |
| 2BE | 1ST REGISTER 5TH TIER |
| 2BF | 1ST REGISTER 6TH TIER |
| 2BG | 1ST REGISTER 7TH TIER |
| 2BH | 1ST REGISTER 8TH TIER |
| 2BJ | 1ST REGISTER 9TH TIER |
| 2BK | 1ST REGISTER 10TH TIER |
| 2BL | 1ST REGISTER 11TH TIER |
| 2BM | 1ST REGISTER 12TH TIER |
| 2BX | 1ST REGISTER ALL TIERS |
| 2BY | 1ST REGISTER SINGLE TIER |
| 2CA | 2ND REGISTER 1ST TIER |
| 2CB | 2ND REGISTER 2ND TIER |
| 2CC | 2ND REGISTER 3RD TIER |
| 2CD | 2ND REGISTER 4TH TIER |
| 2CE | 2ND REGISTER 5TH TIER |
| 2CF | 2ND REGISTER 6TH TIER |
| 2CG | 2ND REGISTER 7TH TIER |
| 2CH | 2ND REGISTER 8TH TIER |
| 2CJ | 2ND REGISTER 9TH TIER |
| 2CK | 2ND REGISTER 10TH TIER |
| 2CL | 2ND REGISTER 11TH TIER |
| 2CM | 2ND REGISTER 12TH TIER |
| 2CX | 2ND REGISTER ALL TIERS |
| 2CY | 2ND REGISTER SINGLE TIER |
| 2DA | 3RD REGISTER 1ST TIER |
| 2DB | 3RD REGISTER 2ND TIER |
| 2DC | 3RD REGISTER 3RD TIER |
| 2DD | 3RD REGISTER 4TH TIER |
| 2DE | 3RD REGISTER 5TH TIER |
| 2DF | 3RD REGISTER 6TH TIER |
| 2DG | 3RD REGISTER 7TH TIER |
| 2DH | 3RD REGISTER 8TH TIER |
| 2DJ | 3RD REGISTER 9TH TIER |
| 2DK | 3RD REGISTER 10TH TIER |
| 2DL | 3RD REGISTER 11TH TIER |
| 2DM | 3RD REGISTER 12TH TIER |
| 2DX | 3RD REGISTER ALL TIERS |
| 2DY | 3RD REGISTER SINGLE TIER |
| 2EA | 4TH REGISTER 1ST TIER |
| 2EB | 4TH REGISTER 2ND TIER |
| 2EC | 4TH REGISTER 3RD TIER |
| 2ED | 4TH REGISTER 4TH TIER |
| 2EE | 4TH REGISTER 5TH TIER |
| 2EF | 4TH REGISTER 6TH TIER |
| 2EG | 4TH REGISTER 7TH TIER |
| 2EH | 4TH REGISTER 8TH TIER |
| 2EJ | 4TH REGISTER 9TH TIER |
| 2EK | 4TH REGISTER 10TH TIER |
| 2EL | 4TH REGISTER 11TH TIER |
| 2EM | 4TH REGISTER 12TH TIER |
| 2EX | 4TH REGISTER ALL TIERS |
| 2EY | 4TH REGISTER SINGLE TIER |
| 2FA | 5TH REGISTER 1ST TIER |
| 2FB | 5TH REGISTER 2ND TIER |
| 2FC | 5TH REGISTER 3RD TIER |
| 2FD | 5TH REGISTER 4TH TIER |
| 2FE | 5TH REGISTER 5TH TIER |
| 2FF | 5TH REGISTER 6TH TIER |
| 2FG | 5TH REGISTER 7TH TIER |
| 2FH | 5TH REGISTER 8TH TIER |
| 2FJ | 5TH REGISTER 9TH TIER |
| 2FK | 5TH REGISTER 10TH TIER |
| 2FL | 5TH REGISTER 11TH TIER |
| 2FM | 5TH REGISTER 12TH TIER |
| 2FX | 5TH REGISTER ALL TIERS |
| 2FY | 5TH REGISTER SINGLE TIER |
| 2GA | 6TH REGISTER 1ST TIER |
| 2GB | 6TH REGISTER 2ND TIER |
| 2GC | 6TH REGISTER 3RD TIER |
| 2GD | 6TH REGISTER 4TH TIER |
| 2GE | 6TH REGISTER 5TH TIER |
| 2GF | 6TH REGISTER 6TH TIER |
| 2GG | 6TH REGISTER 7TH TIER |
| 2GH | 6TH REGISTER 8TH TIER |
| 2GJ | 6TH REGISTER 9TH TIER |
| 2GK | 6TH REGISTER 10TH TIER |
| 2GL | 6TH REGISTER 11TH TIER |
| 2GM | 6TH REGISTER 12TH TIER |
| 2GX | 6TH REGISTER ALL TIERS |
| 2GY | 6TH REGISTER SINGLE TIER |
| 2HA | 7TH REGISTER 1ST TIER |
| 2HB | 7TH REGISTER 2ND TIER |
| 2HC | 7TH REGISTER 3RD TIER |
| 2HD | 7TH REGISTER 4TH TIER |
| 2HE | 7TH REGISTER 5TH TIER |
| 2HF | 7TH REGISTER 6TH TIER |
| 2HG | 7TH REGISTER 7TH TIER |
| 2HH | 7TH REGISTER 8TH TIER |
| 2HJ | 7TH REGISTER 9TH TIER |
| 2HK | 7TH REGISTER 10TH TIER |
| 2HL | 7TH REGISTER 11TH TIER |
| 2HM | 7TH REGISTER 12TH TIER |
| 2HX | 7TH REGISTER ALL TIERS |
| 2HY | 7TH REGISTER SINGLE TIER |
| 2JA | 8TH REGISTER 1ST TIER |
| 2JB | 8TH REGISTER 2ND TIER |
| 2JC | 8TH REGISTER 3RD TIER |
| 2JD | 8TH REGISTER 4TH TIER |
| 2JE | 8TH REGISTER 5TH TIER |
| 2JF | 8TH REGISTER 6TH TIER |
| 2JG | 8TH REGISTER 7TH TIER |
| 2JH | 8TH REGISTER 8TH TIER |
| 2JJ | 8TH REGISTER 9TH TIER |
| 2JK | 8TH REGISTER 10TH TIER |
| 2JL | 8TH REGISTER 11TH TIER |
| 2JM | 8TH REGISTER 12TH TIER |
| 2JX | 8TH REGISTER ALL TIERS |
| 2JY | 8TH REGISTER SINGLE TIER |
| 2KA | 9TH REGISTER 1ST TIER |
| 2KB | 9TH REGISTER 2ND TIER |
| 2KC | 9TH REGISTER 3RD TIER |
| 2KD | 9TH REGISTER 4TH TIER |
| 2KE | 9TH REGISTER 5TH TIER |
| 2KF | 9TH REGISTER 6TH TIER |
| 2KG | 9TH REGISTER 7TH TIER |
| 2KH | 9TH REGISTER 8TH TIER |
| 2KJ | 9TH REGISTER 9TH TIER |
| 2KK | 9TH REGISTER 10TH TIER |
| 2KL | 9TH REGISTER 11TH TIER |
| 2KM | 9TH REGISTER 12TH TIER |
| 2KX | 9TH REGISTER ALL TIERS |
| 2KY | 9TH REGISTER SINGLE TIER |
| 2LA | 10TH REGISTER 1ST TIER |
| 2LB | 10TH REGISTER 2ND TIER |
| 2LC | 10TH REGISTER 3RD TIER |
| 2LD | 10TH REGISTER 4TH TIER |
| 2LE | 10TH REGISTER 5TH TIER |
| 2LF | 10TH REGISTER 6TH TIER |
| 2LG | 10TH REGISTER 7TH TIER |
| 2LH | 10TH REGISTER 8TH TIER |
| 2LJ | 10TH REGISTER 9TH TIER |
| 2LK | 10TH REGISTER 10TH TIER |
| 2LL | 10TH REGISTER 11TH TIER |
| 2LM | 10TH REGISTER 12TH TIER |
| 2LX | 10TH REGISTER ALL TIERS |
| 2LY | 10TH REGISTER SINGLE TIER |
| 2MA | 11TH REGISTER 1ST TIER |
| 2MB | 11TH REGISTER 2ND TIER |
| 2MC | 11TH REGISTER 3RD TIER |
| 2MD | 11TH REGISTER 4TH TIER |
| 2ME | 11TH REGISTER 5TH TIER |
| 2MF | 11TH REGISTER 6TH TIER |
| 2MG | 11TH REGISTER 7TH TIER |
| 2MH | 11TH REGISTER 8TH TIER |
| 2MJ | 11TH REGISTER 9TH TIER |
| 2MK | 11TH REGISTER 10TH TIER |
| 2ML | 11TH REGISTER 11TH TIER |
| 2MM | 11TH REGISTER 12TH TIER |
| 2MX | 11TH REGISTER ALL TIERS |
| 2MY | 11TH REGISTER SINGLE TIER |
| 2XA | ALL REGISTERS 1ST TIER |
| 2XB | ALL REGISTERS 2ND TIER |
| 2XC | ALL REGISTERS 3RD TIER |
| 2XD | ALL REGISTERS 4TH TIER |
| 2XE | ALL REGISTERS 5TH TIER |
| 2XF | ALL REGISTERS 6TH TIER |
| 2XG | ALL REGISTERS 7TH TIER |
| 2XH | ALL REGISTERS 8TH TIER |
| 2XJ | ALL REGISTERS 9TH TIER |
| 2XK | ALL REGISTERS 10TH TIER |
| 2XL | ALL REGISTERS 11TH TIER |
| 2XM | ALL REGISTERS 12TH TIER |
| 2XX | ALL REGISTERS ALL TIERS |
| 2XY | ALL REGISTERS SINGLE TIER |
| Table 2 |
| Reply Code (AJ91) | Reply |
| AAZ | BACK |
| ABA | BOTTOM |
| AQJ | BOTTOM CENTER |
| AQH | CENTER BACK |
| ABC | FRONT |
| ACF | LEFT SIDE |
| BHR | LOWER BACK |
| BHS | LOWER FRONT |
| BFD | RIGHT BOTTOM |
| ACR | RIGHT SIDE |
| AQK | TOP CENTER |
IF STYLE/REPLY CODE(s) ABB, ABX OR AED WERE ENTERED FOR MRC BCNX, YOU MUST ANSWER MRC (AXHR)
BCNXDMOUNTING TYPE FOR WHICH DESIGNED
INDICATES THE TYPE OF MOUNTING FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(BCNX3AEEDAED*;BCNX3AEEDAED$DBWC*;BCNX3AEEDAED$$DBWC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CWF | SINGLE REGISTER SINGLE TIER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AM39) | Reply |
| ABB | BASE |
| AGA | HANDHELD |
| AED | PANEL |
| BWC | PANEL REAR |
| ABX | SHAFT |
ANRCBMINIMUM ANGLE THROW IN DEG PER COUNT
THE SMALLEST ANGLE OF THROW REQUIRED TO MAKE ONE COUNT,EXPRESSED IN DEGREES.
Enter the applicable ISAC from the table below followed by the mode code, followed by a reply with a minimum of one digit on either side of the decimal point.
(ANRC3AEEB2.0)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CWF | SINGLE REGISTER SINGLE TIER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ANREJMAXIMUM COUNT RATE
THE MAXIMUM NUMBER OF COUNTS THE ITEM CAN ACCOMPLISH IN A MEASURED TIME.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANRE3CWFJB2.0*;ANRE3CWFJB2.0$JB2.0*;ANRE3CWFJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CWF | SINGLE REGISTER SINGLE TIER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC11) | Reply |
| E | PER MINUTE |
| B | PER SECOND |
CSWSDNUMERAL DISPLAY METHOD
THE MEANS BY WHICH THE DISPLAY OF THE NUMERAL IS PROVIDED.
Enter the applicable reply code from the table below
(CSWSDDZA)
| Table 1 |
| Reply Code (AJ91) | Reply |
| DZA | DRUM |
| CMD | WHEEL |
Reference NotesRefer to Reference Drawings for assitance in answering this MRC.
CSWTJNUMERAL READOUT
THE READOUT OF THE NUMERALS DISPLAYED BY THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a alpha-numeric reply with a minimum of one character.
(CSWT3AEEJB2.0*;CSWT3AEEJB2.0$JB2.0*;CSWT3AEEJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CWF | SINGLE REGISTER SINGLE TIER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC20) | Reply |
| B | MINIMUM |
| C | MAXIMUM |
IF STYLE/REPLY CODE(s) B1 OR B7 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABWV and ABXF and ADAV)
IF STYLE/REPLY CODE(s) B2 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABKW and ABMK and ABWV and ABXF)
IF STYLE/REPLY CODE(s) B3 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABKW and ABMK and ABWV and ABXF)
IF STYLE/REPLY CODE(s) B4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ABKW and ABMK)
IF STYLE/REPLY CODE(s) B5 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABMK)
IF STYLE/REPLY CODE(s) B6 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ADAV)
IF STYLE/REPLY CODE(s) B8 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (ABHP and ADAV)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLB6)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAK1290 | B1 | UNENCLOSED CYLINDRICAL |
| AAK1291 | B2 | UNENCLOSED SQUARE OR RECTANGULAR |
| AAK1292 | B3 | SQUARE/RECTANGULAR CASED |
| AAK1293 | B4 | ELECTRICAL CASED |
| AAK1296 | B5 | HAND HELD |
| AAK1297 | B6 | HAND HELD ROUND |
| AAK1298 | B7 | CYLINDRICAL CASED |
| AAK1299 | B8 | CYLINDRICAL CASED |
ABHP*JOVERALL LENGTH
THE DIMENSION MEASURED ALONG THE LONGITUDINAL AXIS WITH TERMINATED POINTS AT THE EXTREME ENDS OF THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABHPJAC2.0*;ABHPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAC2.0*;ABKWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAB2.0*;ABMKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABWV*JSHAFT DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A SHAFT,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABWVJAC2.0*;ABWVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABXF*JSHAFT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SHAFT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABXFJAC2.0*;ABXFJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADAV*JOVERALL DIAMETER
A MEASUREMENT OF THE LONGEST STRAIGHT LINE ACROSS A CIRCULAR CROSS-SECTIONAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADAVJAC2.0*;ADAVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AXEC*HREGISTER RESET METHOD
THE MEANS USED TO RETURN THE REGISTER/S/ TO ORIGINAL POSITION.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below.
(AXEC3CWVHAFCAAAF2.0*;AXEC3CWVHAFCAAAF2.0$HAFCAAAF2.0*;AXEC3CWVHAFCAAAF2.0$$HAFCAAAF2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CWF | SINGLE REGISTER SINGLE TIER |
| 3CWU | ALL REGISTERS ALL TIERS |
| 3CWV | ALL REGISTERS SINGLE TIER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AJ12) | Reply |
| AFC | INDIVIDUAL FIGURE |
| AME | TOTAL COUNTER |
| Table 3 |
| Reply Code (AC58) | Reply |
| AAGB | ELECTRIC |
| AAAF | MANUAL |
ANQT*JFIGURE HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF THE FIGURE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ANQT3CWFJAB2.0*;ANQT3CWFJAB2.0$JAB2.0*;ANQT3CWFJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CWF | SINGLE REGISTER SINGLE TIER |
| 3CWU | ALL REGISTERS ALL TIERS |
| 3CWV | ALL REGISTERS SINGLE TIER |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3CXEDBL0032*;HUES3CXEDBL0032$DBR0000*;HUES3CXEDBL0032$$DBR0000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CXE | SINGLE REGISTER SINGLE TIER FIGURE |
| 3CXF | SINGLE REGISTER SINGLE TIER FIGURE BACKGROUND |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| A | ANY ACCEPTABLE |
| BL0000 | BLACK |
| BL0032 | BLACK, FED STD 595, 27038 |
| BL0033 | BLACK, FED STD 595, 37038 |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| GY0139 | GRAY, FED STD 595, 36622 |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0065 | GREEN, FLUORESCENT |
| RG0000 | ORANGE |
| RG0031 | ORANGE, FLUORESCENT |
| RE0000 | RED |
| RE0067 | RED, FLUORESCENT |
| SL0000 | SILVER |
| WH0000 | WHITE |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0024 | WHITE, FLUORESCENT |
| YE0000 | YELLOW |
| YE0035 | YELLOW, FLUORESCENT |
AXHR*JMOUNTING FACILITY TYPE AND QUANTITY
INDICATES THE TYPE AND NUMBER OF FACILITIES BY WHICH THE ITEM IS MOUNTED.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(AXHRJABW2*;AXHRJABW2$$JABW3*)
| Table 1 |
| Reply Code (AM39) | Reply |
| ABC | BRACKET(S) |
| ABH | CLAMP |
| ACR | FLANGE |
| ABL | FRICTION |
| BCG | GIB |
| ABN | LUG(S) |
| ABW | SCREW |
| ABY | SLOT |
| ANF | SPRING CLIP |
| AHF | THREADED HOLE(S) |
| AET | THREADED STUD(S) |
| ACQ | UNTHREADED HOLE(S) |
| AEW | UNTHREADED STUD |
IF STYLE/REPLY CODE(s) A1, A4, A7 OR A8 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AFDS and AFDT and AFDV)
IF STYLE/REPLY CODE(s) A2 OR A5 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AFDS and AFDV)
IF STYLE/REPLY CODE(s) A3 OR A9 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (ABUH)
IF STYLE/REPLY CODE(s) A6 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AFDS)
IF STYLE/REPLY CODE(s) A10 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AFDV)
IF STYLE/REPLY CODE(s) A11 WERE ENTERED FOR MRC ANRL, YOU MUST ANSWER MRC (AFDS and AFDT and AFDV and AFDW)
ANRL*LMOUNTING ARRANGEMENT STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE ARRANGEMENT OF THE MOUNTING.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ANRLLA9)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAK1281 | A1 | FOUR POSITION STAGGERED |
| AAK1294 | A10 | TWO POSITION VERTICAL |
| AAK1295 | A11 | EIGHT POSITION STAGGERED |
| AAK1282 | A2 | FOUR POSITION SQUARE/RECTANGLE |
| AAK1283 | A3 | FOUR POSITION BOLT CIRCLE |
| AAK1284 | A4 | FOUR POSITION DIAMOND |
| AAK1285 | A5 | TWO POSITION DIAGONAL |
| AAK1286 | A6 | TWO POSITION HORIZONTAL |
| AAK1287 | A7 | THREE POSITION TRIANGULAR OFFSET |
| AAK1288 | A8 | THREE POSITION TRIANGULAR |
| AAK1289 | A9 | THREE POSITION BOLT CIRCLE |
ABUH*JMOUNTING HOLE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABUHJAC2.0*;ABUHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDS*JLONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS
THE LONGEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE HORIZONTAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDSJAB2.0*;AFDSJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDT*JSHORTEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS
THE SHORTEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE HORIZONTAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDTJAB2.0*;AFDTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDV*JLONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS
THE LONGEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE VERTICAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDVJAC2.0*;AFDVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AFDW*JSHORTEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS
THE SHORTEST DISTANCE BETWEEN MOUNTING CENTERS PARALLEL TO THE VERTICAL PLANE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AFDWJAC2.0*;AFDWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABFF*DFURNISHED ITEMS
ITEMS FURNISHED AS ACCESSORIES WHICH ARE NOT SPECIFIED ELSEWHERE.
Enter the applicable reply code from the table below
(ABFFDAWY*;ABFFDAWZ$$DAGC*)
| Table 1 |
| Reply Code (AB28) | Reply |
| ADD | ARM |
| AWP | AUXILIARY SPRING |
| AAT | BACK PANEL LIGHT |
| AWQ | BRISTOL SOCKET WRENCH |
| AGC | CARRYING CASE |
| AWR | CONICAL TIP |
| AKG | COVER |
| AWS | FINGER RING |
| AWT | FLAT TIP |
| ACN | GASKET |
| AWW | INSULATED HANDLE |
| AWX | INTERNAL TIME BUZZER |
| AWY | LOCK UNIT |
| AWZ | MAGNIFYING LENS |
| AXA | PANEL FRAME |
| AXB | REMOVABLE RESET KEY |
| AXC | RESET UNIT |
| AXD | SECTION CUP |
| AXE | SOCKET BOX |
| ADE | SPUR GEAR |
| AXF | UNINSULATED HANDLE |
IF YOU ANSWER MRC RADC, YOU MUST ANSWER MRC (RADD)
RADC*DRADIOACTIVE CONTENT
AN INDICATION OF WHETHER OR NOT THE ITEM CONTAINS RADIOACTIVE MATERIALS.
Enter the applicable reply code from the table below
(RADCDP)
| Table 1 |
| Reply Code (AN54) | Reply |
| P | CONTAINS RADIOACTIVE MATERIAL |
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ZZZX*GDEPARTURE FROM CITED DESIGNATOR
THE VARIATION WHEN THE ITEM IS IN CONFORMITY WITH A TYPE DESIGNATOR COVERED BY A SPECIFICATION OR STANDARD, EXCEPT IN REGARD TO ONE OR MORE TECHNICAL DIFFERENTIATING CHARACTERISTICS.
Enter the reply in clear text.
(ZZZXGAS MODIFIED BY MATERIAL*)
ELCD*DEXTRA LONG CHARACTERISTIC DESCRIPTION
A DESCRIPTION THAT EXCEEDS 5000 CHARACTERS.
Enter the Reply Code from the table below.
(ELCDDA*)
| Table 1 |
| Reply Code (AN58) | Reply |
| A | ADDITIONAL DESCRIPTIVE DATA ON MANUAL RECORD |
PKDW*JPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM OF SUPPLY AND ITS CONTAINER.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PKDWJLB2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| GM | GRAMS |
| KG | KILOGRAMS |
| OZ | OUNCES |
| LB | POUNDS |
PKWT*JUNPACKAGED UNIT WEIGHT
THE MEASURED WEIGHT OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING MATERIAL. PLEASE USE MRC CTJS IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(PKWTJLB2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| GM | GRAMS |
| KG | KILOGRAMS |
| OZ | OUNCES |
| LB | POUNDS |
CBME*JCUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF AN ITEM AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CBMEJCN2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CC | CUBIC CENTIMETERS |
| CN | CUBIC INCHES |
BBRJ*DSPECIAL HANDLING FEATURE
THE UNUSUAL OR UNIQUE CHARACTERISTIC/S/ OR QUALITY/IES/ OF AN ITEM WHICH NECESSITATES THE ESTABLISHMENT OF A REQUIREMENT FOR SPECIAL HANDLING.
Enter the applicable reply code from the table below
(BBRJDAB)
| Table 1 |
| Reply Code (AM83) | Reply |
| AB | CORROSIVE |
RADD*JRADIONUCLIDES DATA
THE NAME AND AMOUNT OF THE RADIONUCLIDE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(RADDJJHAAER2.0*)
| Table 1 |
| Reply Code (AG67) | Reply |
| JF | CURIES |
| JH | MICROCURIES |
| JG | MILLICURIES |
| Table 2 |
| Reply Code (AN55) | Reply |
| AAAB | ACTINIUM (89) AC-227 |
| AAAC | ACTINIUM (89) AC-228 |
| AAAD | AMERICIUM (95) AM-241 |
| AAAE | AMERICIUM (95) AM-243 |
| AAAF | ANTIMONY (51) SB-122 |
| AAAG | ANTIMONY (51) SB-124 |
| AAAH | ANTIMONY (51) SB-125 |
| AAAJ | ARGON (18) AR-37 |
| AAAK | ARGON (18) AR-41 |
| AAAL | ARGON (18) AR-41, UNCOMPRESSED |
| AAAM | ARSENIC (33) AS-73 |
| AAAN | ARSENIC (33) AS-74 |
| AAAP | ARSENIC (33) AS-76 |
| AAAQ | ARSENIC (33) AS-77 |
| AAAR | ASTATINE (85) AT-211 |
| AAAS | BARIUM (56) BA-131 |
| AAAT | BARIUM (56) BA-133 |
| AAAW | BARIUM (56) BA-140 |
| AAAX | BERKELIUM (97) BK-249 |
| AAAY | BERYLLIUM (4) BE-7 |
| AAAZ | BISMUTH (83) BI-206 |
| AABA | BISMUTH (83) BI-207 |
| AABB | BISMUTH (83) BI-210 |
| AABC | BISMUTH (83) BI-212 |
| AABD | BROMINE (35) BR-82 |
| AABE | CADMIUM (48) CD-109 |
| AABG | CADMIUM (48) CD-115 |
| AABF | CADMIUM (48) CD-115M |
| AABH | CALCIUM (20) CA-45 |
| AABJ | CALCIUM (20) CA-47 |
| AABK | CALIFORNIUM /98/ CF-249 |
| AABL | CALIFORNIUM /98/ CF-250 |
| AABM | CALIFORNIUM /98/ CF-252 |
| AABN | CARBON (6) C-14 |
| AABP | CERIUM (58) CE-141 |
| AABQ | CERIUM (58) CE-143 |
| AABR | CERIUM (58) CE-144 |
| AABS | CESIUM (55) CS-131 |
| AABW | CESIUM (55) CS-134 |
| AABT | CESIUM (55) CS-134M |
| AABX | CESIUM (55) CS-135 |
| AABY | CESIUM (55) CS-136 |
| AABZ | CESIUM (55) CS-137 |
| AACA | CHLORINE (17) CL-36 |
| AACB | CHLORINE (17) CL-38 |
| AACC | CHROMIUM (24) CR-51 |
| AACD | COBALT (27) CO-56 |
| AACE | COBALT (27) CO-57 |
| AACG | COBALT (27) CO-58 |
| AACF | COBALT (27) CO-58M |
| AACH | COBALT (27) CO-60 |
| AACJ | COPPER (29) CU-64 |
| AACK | CURIUM (96) CM-242 |
| AACL | CURIUM (96) CM-243 |
| AACM | CURIUM (96) CM-244 |
| AACN | CURIUM (96) CM-245 |
| AACP | CURIUM (96) CM-246 |
| AACQ | DYSPROSIUM (66) DY-154 |
| AACR | DYSPROSIUM (66) DY-165 |
| AACS | DYSPROSIUM (66) DY-166 |
| AACT | ERBIUM (68) ER-169 |
| AACW | ERBIUM (68) ER-171 |
| AACX | EUROPIUM (63) EU-150 |
| AACZ | EUROPIUM (63) EU-152 |
| AACY | EUROPIUM (63) EU-152M |
| AADA | EUROPIUM (63) EU-154 |
| AADB | EUROPIUM (63) EU-155 |
| AADC | FLUORINE (9) F-18 |
| AADD | GADOLINIUM (64) GD-153 |
| AADE | GADOLINIUM (64) GD-159 |
| AADF | GALLIUM (31) GA-67 |
| AADG | GALLIUM (31) GA-72 |
| AADH | GERMANIUM (32) GE-71 |
| AADJ | GOLD (79) AU-193 |
| AADK | GOLD (79) AU-194 |
| AADL | GOLD (79) AU-195 |
| AADM | GOLD (79) AU-196 |
| AADN | GOLD (79) AU-198 |
| AADP | GOLD (79) AU-199 |
| AADQ | HAFNIUM (72) HF-181 |
| AADR | HOLMIUM (67) HO-166 |
| AADS | INDIUM (49) IN-113M |
| AADT | INDIUM (49) IN-114M |
| AADX | INDIUM (49) IN-115 |
| AADW | INDIUM (49) IN-115M |
| AADY | IODINE (53) I-124 |
| AADZ | IODINE (53) I-125 |
| AAEA | IODINE (53) I-126 |
| AAEB | IODINE (53) I-129 |
| AAEC | IODINE (53) I-131 |
| AAED | IODINE (53) I-132 |
| AAEE | IODINE (53) I-133 |
| AAEF | IODINE (53) I-134 |
| AAEG | IODINE (53) I-135 |
| AAEH | IRIDIUM (77) IR-190 |
| AAEJ | IRIDIUM (77) IR-192 |
| AAEK | IRIDIUM (77) IR-194 |
| AAEL | IRON (26) FE-55 |
| AAEM | IRON (26) FE-59 |
| AAEQ | KRYPTON (36) KR-85 |
| AAER | KRYPTON (36) KR-85, UNCOMPRESSED |
| AAEN | KRYPTON (36) KR-85M |
| AAEP | KRYPTON (36) KR-85M, UNCOMPRESSED |
| AAES | KRYPTON (36) KR-87 |
| AAET | KRYPTON (36) KR-87, UNCOMPRESSED |
| AAEW | LANTHANUM (57) LA-140 |
| AAEX | LEAD (82) PB-203 |
| AAEY | LEAD (82) PB-210 |
| AAEZ | LEAD (82) PB-212 |
| AAFA | LUTECIUM (71) LU-172 |
| AAFB | LUTECIUM (71) LU-177 |
| AAFC | MAGNESIUM (12) MG-28 |
| AAFD | MANGANESE (25) MN-52 |
| AAFE | MANGANESE (25) MN-54 |
| AAFF | MANGANESE (25) MN-56 |
| AAFH | MERCURY (80) HG-197 |
| AAFG | MERCURY (80) HG-197M |
| AAFJ | MERCURY (80) HG-203 |
| AAFK | MIXED FISSION PRODUCTS MF-P |
| AAFL | MOLYBDENUM (42) MO-99 |
| AAFM | NEODYMIUM (60) ND-147 |
| AAFN | NEODYMIUM (60) ND-149 |
| AAFP | NEPTUNIUM (93) NP-237 |
| AAFQ | NEPTUNIUM (93) NP-239 |
| AAFR | NICKEL (28) NI-56 |
| AAFS | NICKEL (28) NI-59 |
| AAFT | NICKEL (28) NI-63 |
| AAFW | NICKEL (28) NI-65 |
| AAFX | NIOBIUM (41) NB-93M |
| AAFY | NIOBIUM (41) NB-95 |
| AAFZ | NIOBIUM (41) NB-97 |
| AAGA | OSMIUM (76) OS-185 |
| AAGC | OSMIUM (76) OS-191 |
| AAGB | OSMIUM (76) OS-191M |
| AAGD | OSMIUM (76) OS-193 |
| AAGE | PALLADIUM (46) PD-103 |
| AAGF | PALLADIUM (46) PD-109 |
| AAGG | PHOSPHORUS (15) P-32 |
| AAGH | PLATINUM (78) PT-191 |
| AAGJ | PLATINUM (78) PT-193 |
| AAGK | PLATINUM (78) PT-193M |
| AAGM | PLATINUM (78) PT-197 |
| AAGL | PLATINUM (78) PT-197M |
| AAGN | PLUTONIUM (94) PU-238 |
| AAGP | PLUTONIUM (94) PU-239 |
| AAGQ | PLUTONIUM (94) PU-240 |
| AAGR | PLUTONIUM (94) PU-241 |
| AAGS | PLUTONIUM (94) PU-242 |
| AAGT | POLONIUM (84) PO-210 |
| AAGW | POTASSIUM (19) K-42 |
| AAGX | POTASSIUM (19) K-43 |
| AAGY | PRASEODYMIUM (59) PR-142 |
| AAGZ | PRASEODYMIUM (59) PR-143 |
| AAHA | PROMETHIUM (61) PM-147 |
| AAHB | PROMETHIUM (61) PM-149 |
| AAHC | PROTACTINIUM (91) PA-230 |
| AAHD | PROTACTINIUM (91) PA-231 |
| AAHE | PROTACTINIUM (91) PA-233 |
| AAHF | RADIUM (88) RA-223 |
| AAHG | RADIUM (88) RA-224 |
| AAHH | RADIUM (88) RA-226 |
| AAHJ | RADIUM (88) RA-228 |
| AAHK | RADON (86) RN-220 |
| AAHL | RADON (86) RN-222 |
| AAHM | RHENIUM (75) RE-183 |
| AAHN | RHENIUM (75) RE-186 |
| AAHP | RHENIUM (75) RE-187 |
| AAHQ | RHENIUM (75) RE-188 |
| AAHR | RHENIUM (75) RE-NATURAL |
| AAHS | RHODIUM (45) RH-103M |
| AAHT | RHODIUM (45) RH-105 |
| AAHW | RUBIDIUM (37) RB-86 |
| AAHX | RUBIDIUM (37) RB-87 |
| AAHY | RUBIDIUM (37) RB-NATURAL |
| AAJA | RUTHENIUM (44) RU-103 |
| AAJB | RUTHENIUM (44) RU-105 |
| AAJC | RUTHENIUM (44) RU-106 |
| AAHZ | RUTHENIUM (44) RU-97 |
| AAJD | SAMARIUM (62) SM-145 |
| AAJE | SAMARIUM (62) SM-147 |
| AAJF | SAMARIUM (62) SM-151 |
| AAJG | SAMARIUM (62) SM-153 |
| AAJH | SCANDIUM (21) SC-46 |
| AAJJ | SCANDIUM (21) SC-47 |
| AAJK | SCANDIUM (21) SC-48 |
| AAJL | SELENIUM (34) SE-75 |
| AAJM | SILICON (14) SI-31 |
| AAJN | SILVER (47) AG-105 |
| AAJP | SILVER (47) AG-110M |
| AAJQ | SILVER (47) AG-111 |
| AAJR | SODIUM (11) NA-22 |
| AAJS | SODIUM (11) NA-24 |
| AAJW | STRONTIUM (38) SR-85 |
| AAJT | STRONTIUM (38) SR-85M |
| AAJX | STRONTIUM (38) SR-89 |
| AAJY | STRONTIUM (38) SR-90 |
| AAJZ | STRONTIUM (38) SR-91 |
| AAKA | STRONTIUM (38) SR-92 |
| AAKB | SULPHUR (16) S-35 |
| AAKC | TANTALUM (73) TA-182 |
| AAKE | TECHNETIUM (43) TC-96 |
| AAKD | TECHNETIUM (43) TC-96M |
| AAKG | TECHNETIUM (43) TC-97 |
| AAKF | TECHNETIUM (43) TC-97M |
| AAKJ | TECHNETIUM (43) TC-99 |
| AAKH | TECHNETIUM (43) TC-99M |
| AAKK | TELLURIUM (52) TE-125M |
| AAKM | TELLURIUM (52) TE-127 |
| AAKL | TELLURIUM (52) TE-127M |
| AAKP | TELLURIUM (52) TE-129 |
| AAKN | TELLURIUM (52) TE-129M |
| AAKQ | TELLURIUM (52) TE-131M |
| AAKR | TELLURIUM (52) TE-132 |
| AAKS | TERBIUM (65) TB-160 |
| AAKT | THALLIUM (81) TL-200 |
| AAKW | THALLIUM (81) TL-201 |
| AAKX | THALLIUM (81) TL-202 |
| AAKY | THALLIUM (81) TL-204 |
| AAKZ | THORIUM (90) TH-227 |
| AALA | THORIUM (90) TH-228 |
| AALB | THORIUM (90) TH-230 |
| AALC | THORIUM (90) TH-231 |
| AALD | THORIUM (90) TH-232 |
| AALE | THORIUM (90) TH-234 |
| AALF | THORIUM (90) TH-NATURAL |
| AALG | THULIUM (69) TM-168 |
| AALH | THULIUM (69) TM-170 |
| AALJ | THULIUM (69) TM-171 |
| AALK | TIN (50) SN-113 |
| AALL | TIN (50) SN-117M |
| AALM | TIN (50) SN-121 |
| AALN | TIN (50) SN-125 |
| AALP | TRITIUM (1) H-3 |
| AALQ | TRITIUM (1) H-3 AS GAS, LUMINOUS PAINT, OR ADSORBED ON SOLID MATERIAL |
| AALR | TUNGSTEN (74) W-181 |
| AALS | TUNGSTEN (74) W-185 |
| AALT | TUNGSTEN (74) W-187 |
| AALW | URANIUM (92) U-230 |
| AALX | URANIUM (92) U-232 |
| AALY | URANIUM (92) U-233 |
| AALZ | URANIUM (92) U-234 |
| AAMA | URANIUM (92) U-235 |
| AAMB | URANIUM (92) U-236 |
| AAMC | URANIUM (92) U-238 |
| AAMF | URANIUM (92) U-DEPLETED |
| AAME | URANIUM (92) U-ENRICHED |
| AAMD | URANIUM (92) U-NATURAL |
| AAMG | VANADIUM (23) V-48 |
| AAMH | VANADIUM (23) V-49 |
| AAMJ | XENON (54) XE-125 |
| AAMK | XENON (54) XE-131M |
| AAML | XENON (54) XE-131M, UNCOMPRESSED |
| AAMM | XENON (54) XE-133 |
| AAMN | XENON (54) XE-133, UNCOMPRESSED |
| AAMP | XENON (54) XE-135 |
| AAMQ | XENON (54) XE-135, UNCOMPRESSED |
| AAMR | YTTERBIUM (70) YB-175 |
| AAMS | YTTRIUM (39) Y-88 |
| AAMT | YTTRIUM (39) Y-90 |
| AAMX | YTTRIUM (39) Y-91 |
| AAMW | YTTRIUM (39) Y-91M |
| AAMY | YTTRIUM (39) Y-92 |
| AAMZ | YTTRIUM (39) Y-93 |
| AANA | ZINC (30) ZN-65 |
| AANC | ZINC (30) ZN-69 |
| AANB | ZINC (30) ZN-69M |
| AAND | ZIRCONIUM (40) ZR-93 |
| AANE | ZIRCONIUM (40) ZR-95 |
| AANF | ZIRCONIUM (40) ZR-97 |
BBRH*JINSPECTION FREQUENCY
THE SPECIFIED TIME INTERVAL,FROM RECEIPT,NECESSARY TO DETECT MATERIAL DETERIORATION THAT WILL AFFECT STOCK READINESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit.
(BBRHJMHAC2*;BBRHJMHAC2$$JMHAC3*)
| Table 1 |
| Reply Code (AH68) | Reply |
| MH | MONTHS |
| Table 2 |
| Reply Code (AM82) | Reply |
| AB | FIRST INSPECTION |
| AC | REINSPECTION |
BGTB*HSTORAGE FACILITY
THE STORAGE FACILITY STANDARDS ESTABLISHED TO ASSURE THE SERVICEABILITY OF SUPPLIES IN STORAGE.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below.
(BGTBHBANAJ2.0*;BGTBHBANAJ2.0$HBANAJ2.1*)
| Table 1 |
| Reply Code (AN11) | Reply |
| D | ALTERNATE |
| B | MANDATORY |
| C | PREFERRED |
| Table 2 |
| Reply Code (AM81) | Reply |
| AC | CLOSED SHED |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AE | GENERAL PURPOSE WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AH | OPEN SHED |
| AJ | UNHEATED WAREHOUSE |
| Table 3 |
| Reply Code (AN12) | Reply |
| AF | CHILL |
| AJ | CORROSION |
| AD | FLAMMABLE |
| AB | GENERAL PURPOSE |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJCM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
PKQT*AINTERMEDIATE PACKAGE QUANTITY
THE NUMBER OF WRAPS,BOXES,OR BUNDLES,WHICH CONTAINS TWO OR MORE UNITS OF ISSUE,PLACED INSIDE AN EXTERIOR CONTAINER.
Enter the numeric reply with a minimum of one digit.
(PKQTA10*)
EXQT*AEXTERIOR CONTAINER QUANTITY
THE NUMBER OF UNITS OF ISSUE PLACED INSIDE THE EXTERIOR CONTAINER. PLEASE USE MRC NMBR WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the numeric reply with a minimum of one digit.
(EXQTA10*)
SUWT*JUNIT OF ISSUE WEIGHT
THE MEASURED WEIGHT OF THE ACTUAL CONTAINER(S) OR SUPPORTING DEVICE(S) WHICH IS IN DIRECT CONTACT WITH THE ITEM AND ITS CONTENTS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(SUWTJKG2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
ECWT*JEXTERIOR CONTAINER WEIGHT
THE MEASURED WEIGHT OF THE EXTERIOR CONTAINER. PLEASE USE MRC AJWK WITH ISAC CODING OF OUTER CONTAINER IN PLACE OF THIS DISCONTINUED MRC.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ECWTJLB2.0*)
| Table 1 |
| Reply Code (AN75) | Reply |
| KG | KILOGRAMS |
| LB | POUNDS |
SUCB*JUNIT OF ISSUE CUBE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF THE UNIT OF ISSUE AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(SUCBJCM2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
EXME*JEXTERIOR CONTAINER CUBIC MEASURE
A MEASUREMENT OF VOLUME TAKEN BY MULTIPLYING THE LENGTH BY THE WIDTH BY THE HEIGHT OF THE EXTERIOR CONTAINER AND RENDERED IN CUBIC UNITS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(EXMEJCF2.0*)
| Table 1 |
| Reply Code (AN76) | Reply |
| CF | CUBIC FEET |
| CM | CUBIC METERS |
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ596*;HZRDDHAZ411$$DHAZ470*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ042 | ASBESTOS |
| HAZ400 | BARIUM-140 |
| HAZ401 | BERKELIUM-249 |
| HAZ402 | BERYLLIUM-7 |
| HAZ403 | BISMUTH-206 |
| HAZ404 | BISMUTH-207 |
| HAZ405 | BISMUTH-210 |
| HAZ406 | BISMUTH-212 |
| HAZ407 | BROMINE-82 |
| HAZ408 | CADMIUM-109 |
| HAZ410 | CADMIUM-115 |
| HAZ409 | CADMIUM-115M |
| HAZ411 | CALCIUM-45 |
| HAZ412 | CALCIUM-47 |
| HAZ413 | CALIFORNIUM-249 |
| HAZ414 | CALIFORNIUM-250 |
| HAZ415 | CALIFORNIUM-252 |
| HAZ416 | CARBON-14 |
| HAZ417 | CERIUM-141 |
| HAZ418 | CERIUM-143 |
| HAZ419 | CERIUM-144 |
| HAZ420 | CESIUM-131 |
| HAZ422 | CESIUM-134 |
| HAZ421 | CESIUM-134M |
| HAZ423 | CESIUM-135 |
| HAZ424 | CESIUM-136 |
| HAZ425 | CESIUM-137 |
| HAZ426 | CHLORINE-36 |
| HAZ427 | CHLORINE-38 |
| HAZ428 | CHROMIUM-51 |
| HAZ429 | COBALT-56 |
| HAZ430 | COBALT-57 |
| HAZ432 | COBALT-58 |
| HAZ431 | COBALT-58M |
| HAZ433 | COBALT-60 |
| HAZ434 | COPPER-64 |
| HAZ435 | CURIUM-242 |
| HAZ436 | CURIUM-243 |
| HAZ437 | CURIUM-244 |
| HAZ438 | CURIUM-245 |
| HAZ439 | CURIUM-246 |
| HAZ440 | DYSPROSIUM-154 |
| HAZ441 | DYSPROSIUM-165 |
| HAZ442 | DYSPROSIUM-166 |
| HAZ443 | ERBIUM-169 |
| HAZ444 | ERBIUM-171 |
| HAZ043 | ETHYLENE GYLCOL |
| HAZ445 | EUROPIUM-150 |
| HAZ447 | EUROPIUM-152 |
| HAZ446 | EUROPIUM-152M |
| HAZ448 | EUROPIUM-154 |
| HAZ449 | EUROPIUM-155 |
| HAZ450 | FLUORINE-18 |
| HAZ451 | GADOLINIUM-153 |
| HAZ452 | GADOLINIUM-159 |
| HAZ453 | GALLIUM-67 |
| HAZ454 | GALLIUM-72 |
| HAZ455 | GERMANIUM-71 |
| HAZ456 | GOLD-193 |
| HAZ457 | GOLD-194 |
| HAZ458 | GOLD-195 |
| HAZ459 | GOLD-196 |
| HAZ460 | GOLD-198 |
| HAZ461 | GOLD-199 |
| HAZ462 | HAFNIUM-181 |
| HAZ463 | HOLMIUM-166 |
| HAZ464 | INDIUM-113M |
| HAZ465 | INDIUM-114M |
| HAZ467 | INDIUM-115 |
| HAZ466 | INDIUM-115M |
| HAZ468 | IODINE-124 |
| HAZ469 | IODINE-125 |
| HAZ470 | IODINE-126 |
| HAZ471 | IODINE-129 |
| HAZ472 | IODINE-131 |
| HAZ473 | IODINE-132 |
| HAZ474 | IODINE-133 |
| HAZ475 | IODINE-134 |
| HAZ476 | IODINE-135 |
| HAZ477 | IRIDIUM-190 |
| HAZ478 | IRIDIUM-192 |
| HAZ479 | IRIDIUM-194 |
| HAZ480 | IRON-55 |
| HAZ481 | IRON-59 |
| HAZ484 | KRYPTON-85 |
| HAZ485 | KRYPTON-85, UNCOMPRESSED |
| HAZ482 | KRYPTON-85M |
| HAZ483 | KRYPTON-85M, UNCOMPRESSED |
| HAZ486 | KRYPTON-87 |
| HAZ487 | KRYPTON-87, UNCOMPRESSED |
| HAZ488 | LANTHANUM-140 |
| HAZ489 | LEAD-203 |
| HAZ490 | LEAD-210 |
| HAZ491 | LEAD-212 |
| HAZ492 | LUTECIUM-172 |
| HAZ493 | LUTECIUM-177 |
| HAZ092 | MAGNESIUM |
| HAZ030 | MAGNESIUM ALLOY |
| HAZ494 | MAGNESIUM-28 |
| HAZ495 | MANGANESE-52 |
| HAZ496 | MANGANESE-54 |
| HAZ497 | MANGANESE-56 |
| HAZ499 | MERCURY-197 |
| HAZ498 | MERCURY-197M |
| HAZ500 | MERCURY-203 |
| HAZ501 | MOLYBDENUM-99 |
| HAZ502 | NEODYMIUM-147 |
| HAZ503 | NEODYMIUM-149 |
| HAZ504 | NEPTUNIUM-237 |
| HAZ505 | NEPTUNIUM-239 |
| HAZ506 | NICKEL-56 |
| HAZ507 | NICKEL-59 |
| HAZ508 | NICKEL-63 |
| HAZ509 | NICKEL-65 |
| HAZ510 | NIOBIUM-93M |
| HAZ511 | NIOBIUM-95 |
| HAZ512 | NIOBIUM-97 |
| HAZ513 | OSMIUM-185 |
| HAZ515 | OSMIUM-191 |
| HAZ514 | OSMIUM-191M |
| HAZ516 | OSMIUM-193 |
| HAZ517 | PALLADIUM-103 |
| HAZ518 | PALLADIUM-109 |
| HAZ059 | PHOSPHORUS P-32 |
| HAZ519 | PLATINUM-191 |
| HAZ520 | PLATINUM-193 |
| HAZ521 | PLATINUM-193M |
| HAZ523 | PLATINUM-197 |
| HAZ522 | PLATINUM-197M |
| HAZ524 | PLUTONIUM-238 |
| HAZ525 | PLUTONIUM-239 |
| HAZ526 | PLUTONIUM-240 |
| HAZ527 | PLUTONIUM-241 |
| HAZ528 | PLUTONIUM-242 |
| HAZ529 | POLONIUM-210 |
| HAZ530 | POTASSIUM-42 |
| HAZ531 | POTASSIUM-43 |
| HAZ532 | PRASEODYMIUM-142 |
| HAZ533 | PRASEODYMIUM-143 |
| HAZ534 | PROMETHIUM-147 |
| HAZ535 | PROMETHIUM-149 |
| HAZ536 | PROTACTINIUM-230 |
| HAZ537 | PROTACTINIUM-231 |
| HAZ538 | PROTACTINIUM-233 |
| HAZ055 | RADIUM 223 |
| HAZ056 | RADIUM 224 |
| HAZ057 | RADIUM 226 |
| HAZ058 | RADIUM 228 |
| HAZ539 | RADON-220 |
| HAZ540 | RADON-222 |
| HAZ541 | RHENIUM-183 |
| HAZ542 | RHENIUM-186 |
| HAZ543 | RHENIUM-187 |
| HAZ544 | RHENIUM-188 |
| HAZ545 | RHODIUM-103M |
| HAZ546 | RHODIUM-105 |
| HAZ547 | RUBIDIUM-86 |
| HAZ548 | RUBIDIUM-87 |
| HAZ550 | RUTHENIUM-103 |
| HAZ551 | RUTHENIUM-105 |
| HAZ552 | RUTHENIUM-106 |
| HAZ549 | RUTHENIUM-97 |
| HAZ553 | SAMARIUM-145 |
| HAZ554 | SAMARIUM-147 |
| HAZ555 | SAMARIUM-151 |
| HAZ556 | SAMARIUM-153 |
| HAZ557 | SCANDIUM-46 |
| HAZ558 | SCANDIUM-47 |
| HAZ559 | SCANDIUM-48 |
| HAZ560 | SELENIUM-75 |
| HAZ561 | SILICON-31 |
| HAZ562 | SILVER-105 |
| HAZ563 | SILVER-110M |
| HAZ564 | SILVER-111 |
| HAZ565 | SODIUM-22 |
| HAZ566 | SODIUM-24 |
| HAZ568 | STRONTIUM-85 |
| HAZ567 | STRONTIUM-85M |
| HAZ569 | STRONTIUM-89 |
| HAZ570 | STRONTIUM-90 |
| HAZ571 | STRONTIUM-91 |
| HAZ572 | STRONTIUM-92 |
| HAZ573 | SULPHUR-35 |
| HAZ574 | TANTALUM-182 |
| HAZ576 | TECHNETIUM-96 |
| HAZ575 | TECHNETIUM-96M |
| HAZ578 | TECHNETIUM-97 |
| HAZ577 | TECHNETIUM-97M |
| HAZ580 | TECHNETIUM-99 |
| HAZ579 | TECHNETIUM-99M |
| HAZ581 | TELLURIUM-125M |
| HAZ583 | TELLURIUM-127 |
| HAZ582 | TELLURIUM-127M |
| HAZ585 | TELLURIUM-129 |
| HAZ584 | TELLURIUM-129M |
| HAZ586 | TELLURIUM-131M |
| HAZ587 | TELLURIUM-132 |
| HAZ588 | TERBIUM-160 |
| HAZ589 | THALLIUM-200 |
| HAZ590 | THALLIUM-201 |
| HAZ591 | THALLIUM-202 |
| HAZ592 | THALLIUM-204 |
| HAZ593 | THORIUM-227 |
| HAZ594 | THORIUM-228 |
| HAZ595 | THORIUM-230 |
| HAZ596 | THORIUM-231 |
| HAZ597 | THORIUM-232 |
| HAZ598 | THORIUM-234 |
| HAZ599 | THORIUM-NATURAL |
| HAZ600 | THULIUM-168 |
| HAZ601 | THULIUM-170 |
| HAZ602 | THULIUM-171 |
| HAZ603 | TIN-113 |
| HAZ604 | TIN-117M |
| HAZ605 | TIN-121 |
| HAZ606 | TIN-125 |
| HAZ607 | TUNGSTEN-181 |
| HAZ608 | TUNGSTEN-185 |
| HAZ609 | TUNGSTEN-187 |
| HAZ610 | URANIUM-230 |
| HAZ611 | URANIUM-232 |
| HAZ612 | URANIUM-233 |
| HAZ613 | URANIUM-234 |
| HAZ614 | URANIUM-235 |
| HAZ615 | URANIUM-236 |
| HAZ616 | URANIUM-238 |
| HAZ619 | URANIUM-DEPLETED |
| HAZ618 | URANIUM-ENRICHED |
| HAZ617 | URANIUM-NATURAL |
| HAZ620 | VANADIUM-48 |
| HAZ621 | VANADIUM-49 |
| HAZ622 | XENON-125 |
| HAZ623 | XENON-131M |
| HAZ624 | XENON-131M, UNCOMPRESSED |
| HAZ625 | XENON-133 |
| HAZ626 | XENON-133, UNCOMPRESSED |
| HAZ627 | XENON-135 |
| HAZ628 | XENON-135, UNCOMPRESSED |
| HAZ629 | YTTERBIUM-175 |
| HAZ630 | YTTRIUM-88 |
| HAZ631 | YTTRIUM-90 |
| HAZ633 | YTTRIUM-91 |
| HAZ632 | YTTRIUM-91M |
| HAZ634 | YTTRIUM-92 |
| HAZ635 | YTTRIUM-93 |
| HAZ052 | ZINC |
| HAZ636 | ZINC-65 |
| HAZ638 | ZINC-69 |
| HAZ637 | ZINC-69M |
| HAZ639 | ZIRCONIUM-93 |
| HAZ640 | ZIRCONIUM-95 |
| HAZ641 | ZIRCONIUM-97 |
SHPN*ADOT PROPER SHIPPING NAME
THE PROPER SHIPPING NAME AS IDENTIFIED BY THE DEPARTMENT OF TRANSPORTATION (DOT) AND LISTED IN THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE.
Enter the alpha-numeric reply with a minimum of one character.
(SHPNAN6)
DENN*ADOT IDENTIFICATION NUMBER
THE IDENTIFICATION NUMBER ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PROPER SHIPPING NAME. IDENTIFICATION NUMBERS PRECEDED BY THE LETTERS "UN" ARE ASSOCIATED WITH INTERNATIONAL AS WELL AS DOMESTIC TRANSPORTATION AND THOSE PRECEDED BY THE LETTERS "NA" ARE NOT RECOGNIZED FOR INTERNATIONAL TRANSPORTATION OF HAZARDOUS MATERIALS (DANGEROUS GOODS) EXCEPT TO AND FROM THE UNITED STATES AND CANADA.
Enter the alpha-numeric reply with a minimum of one character.
(DENNAS8)
WLBL*ADOT WARNING LABEL CODE
THE WARNING LABEL CODE ASSIGNED BY THE DEPARTMENT OF TRANSPORTATION (DOT) TO EACH PACKAGE OR CONTAINMENT DEVICE OFFERED FOR TRANSPORTATION OF A HAZARDOUS MATERIAL WHICH MEETS ONE OR MORE HAZARD CLASS DEFINITIONS IN ACCORDANCE WITH THE TITLE 49 CODE OF FEDERAL REGULATIONS (CFR), PART 172, HAZARDOUS MATERIALS TABLE. THIS MRC HAS BEEN DISCONTINUED WITH NO REPLACEMENT - THIS INFORMATION IS NOT CHARACTERISTIC INFORMATION, THIS INFORMATION NEEDS TO BE INPUT IN SEG G OF THE TIR.
Enter the alpha-numeric reply with a minimum of one character.
(WLBLAX3)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)