An ornamental item, generally round in shape, and designed to be mounted on a wall. It may include an inscription, a departmental, organizational, or military service seal, and/or other heraldic designs.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 1A deleted from MRC MATT.
ISAC Reply 1B deleted from MRC MATT.
ISAC Reply 1D deleted from MRC MATT.
ISAC Reply 3AEE added to MRC AYBM.
ISAC Reply 3AIV added to MRC AYBM.
ISAC Reply 3AIW added to MRC AYBM.
ISAC Reply 3AIZ added to MRC AYBM.
ISAC Reply 3HOU added to MRC AYBM.
ISAC Reply 1A deleted from MRC AYBM.
ISAC Reply 1B deleted from MRC AYBM.
ISAC Reply 1Z deleted from MRC AYBM.
ISAC Reply 3AEE added to MRC ALFP.
ISAC Reply 3AIV added to MRC ALFP.
ISAC Reply 3AIW added to MRC ALFP.
ISAC Reply 3AIZ added to MRC ALFP.
ISAC Reply 3HOU added to MRC ALFP.
ISAC Reply 1A deleted from MRC ALFP.
ISAC Reply 1B deleted from MRC ALFP.
ISAC Reply 1Z deleted from MRC ALFP.
ISAC Reply 3ABE added to MRC HUES.
ISAC Reply 3AEE added to MRC HUES.
ISAC Reply 3AWM added to MRC HUES.
ISAC Reply 3AWY added to MRC HUES.
ISAC Reply 3AWZ added to MRC HUES.
ISAC Reply 3AXA added to MRC HUES.
ISAC Reply 3AXC added to MRC HUES.
ISAC Reply 3HOU added to MRC HUES.
ISAC Reply 2AA deleted from MRC HUES.
ISAC Reply 2AB deleted from MRC HUES.
ISAC Reply 2AC deleted from MRC HUES.
ISAC Reply 2AD deleted from MRC HUES.
ISAC Reply 2BA deleted from MRC HUES.
ISAC Reply 2BB deleted from MRC HUES.
ISAC Reply 2BC deleted from MRC HUES.
ISAC Reply 2BD deleted from MRC HUES.
ISAC Reply 2XA deleted from MRC HUES.
ISAC Reply 2XB deleted from MRC HUES.
ISAC Reply 2XC deleted from MRC HUES.
ISAC Reply 2XD deleted from MRC HUES.
ISAC Reply 2XX deleted from MRC HUES.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED30426*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDPCR000*;MATT3AEEDPCR000$DPCM000*;MATT3AEEDPCR000$$DPCM000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1060 | ALUMINUM ALLOY 1060 |
| CNA000 | CARBON |
| PPC000 | CARDBOARD |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| FBA000 | FIBER |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| MGB000 | MAGNESIUM ALLOY |
| NLA000 | NICKEL |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCD000 | PLASTIC ACRYLIC |
| PCCK00 | PLASTIC CELLULOSE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCH000 | PLASTIC EPOXY |
| PCJ000 | PLASTIC MELAMINE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCM000 | PLASTIC PHENOL-FORMALDEHYDE |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCW000 | PLASTIC POLYESTER |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAP00 | PLASTIC VINYL |
| PCBD00 | PLASTIC VINYL CHLORIDE |
| PCAT00 | PLASTIC VINYLIDENE CHLORIDE |
| RCE000 | RUBBER |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDCMB000*;SFTTDCUA000$DAGA000*;SFTTDCUA000$$DAGA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCD000 | DICHROMATE SODIUM |
| ENA000 | ENAMEL |
| END000 | ENAMEL BAKED |
| CLD000 | ENAMEL PORCELAIN |
| MSD000 | EPOXY |
| IRA000 | IRIDIUM |
| LQA000 | LACQUER |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PHD000 | PHOSPHATE ZINC |
| PCA000 | PLASTIC |
| PCH000 | PLASTIC VINYL |
| PRC000 | PRIMER ZINC CHROMATE |
| AGA000 | SILVER |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
AYBM*GINSCRIPTION
THE LETTERING OR DESIGN ON THE ITEM,OR THAT IS THE ITEM.
Enter the applicable ISAC from the table below, followed by the Mode Code and the clear text reply.
(AYBM3AEEGCLEARTEXT)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AIV | FIRST SIDE |
| 3AIW | SECOND SIDE |
| 3AIZ | SINGLE SIDE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
ALFP*DMARKING DESIGNATION
A DESIGNATION OF THE MARKING(S) ON THE ITEM OR THAT IS THE ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ALFP3AIWDAP*;ALFP3AIWDAP$DAN*;ALFP3AIWDAP$$DAN*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AIV | FIRST SIDE |
| 3AIW | SECOND SIDE |
| 3AIZ | SINGLE SIDE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AF91) | Reply |
| AJ | DESIGN |
| AL | INSIGNIA |
| AM | LEGEND |
| AN | SILHOUETTE |
| AD | STRIPES |
| AP | SYMBOL |
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(HUES3AWYDGY0036*;HUES3AWYDGY0036$DRG0019*;HUES3AWYDGY0036$$DRG0019*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3ABE | BASE |
| 3AEE | OVERALL |
| 3AWM | INSCRIPTION |
| 3AWY | SINGLE SIDE BORDER |
| 3AWZ | SINGLE SIDE INSCRIPTION |
| 3AXA | SINGLE SIDE INSCRIPTION BACKGROUND |
| 3AXC | SINGLE SIDE OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AD06) | Reply |
| AL0000 | ALUMINUM |
| AL0022 | ALUMINUM, FED STD 595, 17178 |
| AL0016 | ALUMINUM, FROSTED |
| AL0015 | ALUMINUM, SATIN |
| AL0018 | ALUMINUM, SILVER |
| AM0000 | AMBER |
| BE0000 | BEIGE |
| BL0000 | BLACK |
| BL0001 | BLACK, FED STD 595, 17038 |
| BL0032 | BLACK, FED STD 595, 27038 |
| BL0033 | BLACK, FED STD 595, 37038 |
| BL0039 | BLACK, LUSTERLESS |
| BL0026 | BLACK, MIL-I-43170 |
| BL0004 | BLACK, OPAQUE |
| BL0020 | BLACK, TT-I-558 |
| BL0114 | BLACK, TT-L-20, NO 37038 |
| BL0035 | BLACK, US ARMY, 211 |
| BU0000 | BLUE |
| BU0005 | BLUE, DARK |
| BU0085 | BLUE, FED STD 595, 15044 |
| BU0086 | BLUE, FED STD 595, 15045 |
| BU0087 | BLUE, FED STD 595, 15102 |
| BU0088 | BLUE, FED STD 595, 15123 |
| BU0272 | BLUE, LIGHT, CF 406, UNITED AIRCRAFT CORP |
| MS0012 | BRASS |
| BR0000 | BROWN |
| MS0013 | BUFF |
| MS0207 | BUFF, LIGHT |
| MS0078 | CHROME, SATIN |
| CL0000 | CLEAR |
| CT0001 | COPPER |
| MS0096 | FROSTED |
| GL0000 | GOLD |
| GY0005 | GRAY, ALUMINUM |
| GY0028 | GRAY, FED STD 595, 16473 |
| GY0100 | GRAY, FED STD 595, 26132 |
| GY0036 | GRAY, FED STD 595, 26492 |
| GY0029 | GRAY, FED STD 595, 36231 |
| GY0012 | GRAY, HEATHER |
| GY0002 | GRAY, LIGHT |
| GY0015 | GRAY, NICKEL |
| GY0019 | GRAY, SILVER |
| GY0125 | GRAY, SKY |
| GY0021 | GRAY, STEEL |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0066 | GREEN, FED STD 595, 14187 |
| GR0072 | GREEN, FED STD 595, 24108 |
| GR0164 | GREEN, FED STD 595, 24241 |
| GR0073 | GREEN, FED STD 595, 34087 |
| GR0243 | GREEN, FED STD 595, 34260 |
| GR0032 | GREEN, LIGHT |
| GR0042 | GREEN, YELLOW |
| MS0034 | MAGENTA |
| MS0068 | MAGENTA, FED STD 595, 17142 |
| MS0284 | MAGENTA, FED STD 595, 27142 |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| MS0038 | NICKEL |
| LD0000 | OLIVE DRAB |
| LD0001 | OLIVE DRAB, ANA-613 |
| LD0002 | OLIVE DRAB, FED STD 595, 34087 |
| RG0000 | ORANGE |
| RG0019 | ORANGE, FED STD 595, 12197 |
| RG0020 | ORANGE, FED STD 595, 12246 |
| RG0021 | ORANGE, FED STD 595, 32246 |
| RG0001 | ORANGE-RED |
| RG0002 | ORANGE-YELLOW |
| RG0037 | ORANGE-YELLOW, TT-E-489 |
| PK0000 | PINK |
| PU0000 | PURPLE |
| RE0000 | RED |
| RE0182 | RED, 509, SIMMONS BOARDMAN PUBLISHING CORP |
| RE0009 | RED, BRIGHT |
| RE0035 | RED, DARK |
| RE0068 | RED, FED STD 595, 11105 |
| RE0001 | RED, FED STD 595, 11136 |
| RE0069 | RED, FED STD 595, 21105 |
| RE0121 | RED, FED STD 595, 21136 |
| RE0070 | RED, FED STD 595, 31136 |
| RE0067 | RED, FLUORESCENT |
| RE0181 | RED, INSIGNIA |
| RE0112 | RED, MUNSELL |
| MS0079 | SATIN-INVALID |
| SL0000 | SILVER |
| SL0001 | SILVER, FED STD 595, 17178 |
| TA0000 | TAN |
| RE0063 | VERMILLION |
| VL0000 | VIOLET |
| WA0000 | WALNUT |
| WH0000 | WHITE |
| WH0072 | WHITE, 511, UNITED AIRCRAFT CORP |
| WH0034 | WHITE, DULL |
| WH0025 | WHITE, FED STD 595, 17875 |
| WH0064 | WHITE, FED STD 595, 27875 |
| WH0026 | WHITE, FED STD 595, 37778 |
| WH0027 | WHITE, FED STD 595, 37875 |
| WH0032 | WHITE, LUMINOUS |
| WH0063 | WHITE, LUSTERLESS, TT-L-20 |
| WH0070 | WHITE, MIS10016/408, ARMY MISSILE COMMAND |
| WH0037 | WHITE, SILVER |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
| YE0006 | YELLOW, CANARY |
| YE0036 | YELLOW, FED STD 595, 13538 |
| YE0098 | YELLOW, FED STD 595, 13548 |
| YE0037 | YELLOW, FED STD 595, 13655 |
| YE0038 | YELLOW, FED STD 595, 23655 |
| YE0040 | YELLOW, FED STD 595, 33538 |
| YE0035 | YELLOW, FLUORESCENT |
ASDB*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASDBJAB2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABSX*DATTACHMENT METHOD
THE MEANS USED TO ATTACH THE ITEM.
Enter the applicable reply code from the table below
(ABSXDSF*;ABSXDCR$DCS*;ABSXDCR$$DCS*)
| Table 1 |
| Reply Code (AB47) | Reply |
| CK | ADHESIVE |
| CB | BONDED |
| SL | BRACKET MOUNTED |
| AA | CEMENTED |
| YD | CHAIN |
| AB | CLAMP |
| CM | CLIP |
| FX | CRIMP |
| CN | DOUBLE FLANGE |
| SF | HINGE |
| CP | HOLE |
| TT | INSERT |
| CQ | MAGNETIC |
| CR | RING |
| CS | SEWED |
| CT | SLITTED TAB |
| CJ | SLOT |
| CC | SOLDERED |
| KL | STRAP |
| TB | TAB |
| CX | TWINE |
| CY | WIRE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAPZ*;CBBLDFHC$$DFHW*)
| Table 1 |
| Reply Code (AN47) | Reply |
| FGT | HEAT SENSITIVE ADHESIVE |
| DCR | MOUNTING DEVICE |
| APZ | OBSERVATION FACILITY |
| BZU | PRESSURE SENSITIVE ADHESIVE TAPE |
| FHS | REFLECTIVE SURFACE |
| FHC | REMOVEABLE PROTECTIVE BACKING |
| FHV | SOLVENT ACTIVATED ADHESIVE TAPE |
| FHW | WATER ACTIVATED ADHESIVE TAPE |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDAEU*;ADZCDAEF$DACC*;ADZCDAEF$$DACC*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABZ | ALCOHOL RESISTANT |
| ACK | ALKALI RESISTANT |
| ACV | CLEANING RESISTANT |
| ACB | COLD RESISTANT |
| AAC | CORROSION RESISTANT |
| AAF | DUST RESISTANT |
| AEU | FADE |
| AEK | HEAT |
| AAR | HUMIDITY RESISTANT |
| ACC | MILDEW RESISTANT |
| AEV | MINERAL RESISTANT |
| AAW | MOISTURE RESISTANT |
| ABF | SOLVENT RESISTANT |
| AEF | STAIN RESISTANT |
| AHN | TEMPERATURE RESISTANT |
| ACM | WATER RESISTANT |
IF STYLE/REPLY CODE(s) A1, A2, A4, A5, A6, A7, A8 OR A9 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABRY and ABNM and ABGL)
IF STYLE/REPLY CODE(s) A10, A11 OR A12 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABRY and ABNM and ABGL)
IF STYLE/REPLY CODE(s) A13 OR A14 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ALHL and ABGL and ABNM)
IF STYLE/REPLY CODE(s) A15 OR A16 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABNM and ASDB)
IF STYLE/REPLY CODE(s) A17 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ALHL and ABNM)
IF STYLE/REPLY CODE(s) A18, A19, A20, A21 OR A23 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABRY and ABGL and ABNM)
IF STYLE/REPLY CODE(s) A22 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABMZ and ABNM)
IF STYLE/REPLY CODE(s) A26, A30 OR A31 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABRY and ABNM and ABGL)
IF STYLE/REPLY CODE(s) A1A WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (ABRY and ABGL and ABNM)
AGTALBASIC SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE BASIC APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AGTALA12)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAB1064 | A1 | SQUARE |
| AAB1073 | A10 | RECTANGULAR W/CONCAVE BOTTOM |
| AAB1074 | A11 | RECTANGULAR W/NOTCHED CORNERS |
| AAB1075 | A12 | RECTANGULAR W/ROUNDED TOP |
| AAB1076 | A13 | TRIANGULAR |
| AAB1077 | A14 | INVERTED TRIANGULAR |
| AAB1078 | A15 | HEXAGONAL |
| AAB1079 | A16 | OCTAGONAL |
| AAB1080 | A17 | DIAMOND |
| AAB1081 | A18 | TRAPEZOIDAL |
| AAB1082 | A19 | SECTOR |
| AAB1083 | A1A | SQUARE W/ROUNDED CORNERS |
| AAB1065 | A2 | RECTANGULAR |
| AAB1084 | A20 | SEMICIRCULAR |
| AAB1085 | A21 | OVAL ELLIPTICAL |
| AAB1086 | A22 | ROUND |
| AAB1087 | A23 | CRESCENT W/ROUNDED ENDS |
| AAB1090 | A26 | CRESCENT W/POINTED ENDS |
| AAB1094 | A30 | SHIELD |
| AAB1095 | A31 | "H" |
| AAB1067 | A4 | RECTANGULAR |
| AAB1068 | A5 | RECTANGULAR W/TAB AT EACH END |
| AAB1069 | A6 | RECTANGULAR W/POINTED END |
| AAB1070 | A7 | RECTANGULAR W/ROUNDED END |
| AAB1071 | A8 | RECTANGULAR W/ROUNDED ENDS |
| AAB1072 | A9 | RECTANGULAR W/CONCAVE TOP |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAA2.0*;ABGLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMH*JRECESS DEPTH
A MEASUREMENT BETWEEN SPECIFIED POINTS ON THE RECESS,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMHJAC2.0*;ABMHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMZ*JDIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMZJAC2.0*;ABMZJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABNM*JTHICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABNMJAC2.0*;ABNMJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAC2.0*;ABRYJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEJZ*JDEPTH
A LINEAR MEASUREMENT FROM THE SURFACE TO A SPECIFIED INNER POINT ON AN ITEM,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJZJAA2.0*;AEJZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALHL*JSIDE LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SIDE,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ALHLJAB2.0*;ALHLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDGW)
| Table 1 |
| Reply Code (EN02) | Reply |
| GW | COMPREHENSIVE PROCUREMENT GUIDELINE - MISCELLANEOUS PRODUCTS - AWARDS AND PLAQUES |
PRMT*DPRECIOUS MATERIAL
IDENTIFICATION OF THE PRECIOUS MATERIAL CONTAINED IN THE ITEM.
Enter the applicable reply code from the table below
(PRMTDRHA000*;PRMTDRTA000$$DAUA000*)
| Table 1 |
| Reply Code (MA01) | Reply |
| AUA000 | GOLD |
| IRA000 | IRIDIUM |
| AZA000 | OSMIUM |
| PDA000 | PALLADIUM |
| PTA000 | PLATINUM |
| RHA000 | RHODIUM |
| RTA000 | RUTHENIUM |
| AGA000 | SILVER |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information