A structural shape fabricated from nonmetallic material(s) having a peculiar preformed cross-sectional form. It may have a reinforcing agent(s) and backing. Excludes:SEAL, NONMETALLIC SPECIAL SHAPED SECTION.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED30219*)
IF STYLE/REPLY CODE(s) C6, C13, C36, C39, C42, C44, C57, C100, C103, C105, C132, C136, C147, C161, C191, C228, C299, C304, C314 OR C328 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK)
IF STYLE/REPLY CODE(s) C184 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ABRF and AJGP and AJGW and AJHJ and AJHK and AJJA)
IF STYLE/REPLY CODE(s) C2 OR C317 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADUE and AEJJ and AHGN and AJGP and AJGW)
IF STYLE/REPLY CODE(s) C209 OR C236 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADUE and AHGN and AJGP)
IF STYLE/REPLY CODE(s) C214 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADUE and AHGN and AJHE)
IF STYLE/REPLY CODE(s) C208 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADUE and AJGN and AJGU and AJHE and AJHV and AJHW and AJJG)
IF STYLE/REPLY CODE(s) C205 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and ADXK and ADXL and ADXM and AJGU)
IF STYLE/REPLY CODE(s) C290 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and ADXK and AJGQ and AJHG)
IF STYLE/REPLY CODE(s) C313 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and ADXL and AJHY and AJHZ)
IF STYLE/REPLY CODE(s) C168 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and AEJJ and AJGQ and AJGW)
IF STYLE/REPLY CODE(s) C307 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and AJGP and AJGU and AJHE)
IF STYLE/REPLY CODE(s) C286 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and AJGP and AJGW)
IF STYLE/REPLY CODE(s) C33 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and AJGP and AJHV)
IF STYLE/REPLY CODE(s) C30 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and AJGQ and AJHY)
IF STYLE/REPLY CODE(s) C32 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and AJGU and AJHE and AJHM and AJHN and AJHV)
IF STYLE/REPLY CODE(s) C312 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXJ and AJGU and AJHE and AJHY)
IF STYLE/REPLY CODE(s) C61 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXK and ADXL and ADXM and ADYF and ADYJ and AJGU and AJGW and AJHE)
IF STYLE/REPLY CODE(s) C298 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXK and ADXL and ADXM and AJGU and AJHR and AJJG)
IF STYLE/REPLY CODE(s) C62 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXK and AJGN and AJGP and AJGZ and AJHN and ADXZ and ADYA)
IF STYLE/REPLY CODE(s) C189 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXK and AEJJ and AJGQ and AJGW)
IF STYLE/REPLY CODE(s) C38 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXK and AJGU and AJHE and AJHF and AJHW and AJJS)
IF STYLE/REPLY CODE(s) C303 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXL)
IF STYLE/REPLY CODE(s) C285 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXL and ADXM and AJGP and AJGQ and ADXZ and ADYA)
IF STYLE/REPLY CODE(s) C104 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXL and ADYM)
IF STYLE/REPLY CODE(s) C95 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXR and ADXS and ADYM and ADYN and AJGU and AJGV and AJHE and AJHR and AJJM and AJJS)
IF STYLE/REPLY CODE(s) C94 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADXR and AJHF and AJHV and AJJA and AJJH and AJJP and AJJQ and AJJR)
IF STYLE/REPLY CODE(s) C181 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADYG and AEJJ and AJGW)
IF STYLE/REPLY CODE(s) C233 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADYP and ADYR and AHGN and AJGM and AJGP and AJHY and AJJB and AJJC and AJJH)
IF STYLE/REPLY CODE(s) C230 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADYP and ADYR and AHGN and AJGM and AJGP and AJHY and AJJC and AJJH)
IF STYLE/REPLY CODE(s) C232 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADYP and ADYR and AHGN and AJGM and AJGP and AJHY and AJJC and AJJH)
IF STYLE/REPLY CODE(s) C235 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ)
IF STYLE/REPLY CODE(s) C211, C229 OR C331 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AHGN and AJGP and AJGW)
IF STYLE/REPLY CODE(s) C213 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AHGN and AJGW)
IF STYLE/REPLY CODE(s) C169, C322 OR C325 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGQ and AJGW)
IF STYLE/REPLY CODE(s) C319 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGQ and AJGW and AJHE and AJHY and AJHZ)
IF STYLE/REPLY CODE(s) C261 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGQ and AJGW and AJHY and AJHZ)
IF STYLE/REPLY CODE(s) C212 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGQ and AJHE and AJJM)
IF STYLE/REPLY CODE(s) C148 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGU and AJGV and AJGW and AJHF and AJJD and AJJN)
IF STYLE/REPLY CODE(s) C151 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGU and AJGW and AJHE and AJHS)
IF STYLE/REPLY CODE(s) C146 OR C171 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGU and AJGW and AJHE and AJJM)
IF STYLE/REPLY CODE(s) C1, C123, C137, C139, C142, C143, C144, C172, C194, C196, C216, C220, C249, C266 OR C316 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW)
IF STYLE/REPLY CODE(s) C141 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJHG)
IF STYLE/REPLY CODE(s) C173 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJHJ and AJHK)
IF STYLE/REPLY CODE(s) C140 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJHS)
IF STYLE/REPLY CODE(s) C138 OR C263 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJHY)
IF STYLE/REPLY CODE(s) C259, C260 OR C262 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJHY and AJHZ)
IF STYLE/REPLY CODE(s) C282 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJHY and AJJB)
IF STYLE/REPLY CODE(s) C281 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJHY and AJJC)
IF STYLE/REPLY CODE(s) C3 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJJD)
IF STYLE/REPLY CODE(s) C323 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJGW and AJJS)
IF STYLE/REPLY CODE(s) C273 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGP and AJJB)
IF STYLE/REPLY CODE(s) C162 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGQ and AJGW)
IF STYLE/REPLY CODE(s) C193 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGU and AJGW)
IF STYLE/REPLY CODE(s) C81 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGU and AJGW and AJHE)
IF STYLE/REPLY CODE(s) C129 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGU and AJGW and AJHE and AJHQ and AJJC and AJJF)
IF STYLE/REPLY CODE(s) C267 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGU and AJHE and AJJC and AJJF)
IF STYLE/REPLY CODE(s) C4 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGV and AJGW and AJJC)
IF STYLE/REPLY CODE(s) C5, C7, C145, C179, C180, C186, C188, C270 OR C318 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGW)
IF STYLE/REPLY CODE(s) C336 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGW and AJHJ and AJHK)
IF STYLE/REPLY CODE(s) C227 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGW and AJHJ and AJHL)
IF STYLE/REPLY CODE(s) C263 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGW and AJHQ and AJHY and AJHZ and AJJC and AJJH)
IF STYLE/REPLY CODE(s) C128 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGW and AJHY and AJJC and AJJD and AJJH and AJJN)
IF STYLE/REPLY CODE(s) C183 OR C234 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJGW and AJJC)
IF STYLE/REPLY CODE(s) C268 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AEJJ and AJJB)
IF STYLE/REPLY CODE(s) C271 OR C272 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AHGN)
IF STYLE/REPLY CODE(s) C206 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AHGN and AJGP and AJGQ and AJHE and AJJD and AJJH)
IF STYLE/REPLY CODE(s) C9 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJGW and AJHE and AJJF and AJJC)
IF STYLE/REPLY CODE(s) C330 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGM and AJGN and AJGX and AJHY and AJJN)
IF STYLE/REPLY CODE(s) C41 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGN and AJGZ and AJJB)
IF STYLE/REPLY CODE(s) C16, C73, C107, C108, C109, C113, C176, C177, C182 OR C315 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP)
IF STYLE/REPLY CODE(s) C68 OR C96 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGQ)
IF STYLE/REPLY CODE(s) C90 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGQ and AJGU and AJHE)
IF STYLE/REPLY CODE(s) C310 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGQ and AJGW and AJJS)
IF STYLE/REPLY CODE(s) C69 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGQ and AJHG)
IF STYLE/REPLY CODE(s) C25 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGQ and AJHV and AJHW and AJHY)
IF STYLE/REPLY CODE(s) C130 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGU and AJGW)
IF STYLE/REPLY CODE(s) C78 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGU and AJGW and AJHE and AJHG)
IF STYLE/REPLY CODE(s) C71 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGU and AJHE)
IF STYLE/REPLY CODE(s) C8 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGU and AJHE and AJJC)
IF STYLE/REPLY CODE(s) C275 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGV and AJHF and AJJB and AJJS)
IF STYLE/REPLY CODE(s) C43, C106, C112 OR C187 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGW)
IF STYLE/REPLY CODE(s) C122 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJGW and AJHG)
IF STYLE/REPLY CODE(s) C17 OR C21 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJHF and AJJB and AJJH and AJJS)
IF STYLE/REPLY CODE(s) C70 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJJB and AJHG)
IF STYLE/REPLY CODE(s) C47 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJJS and AJHG)
IF STYLE/REPLY CODE(s) C159 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJHS)
IF STYLE/REPLY CODE(s) C26 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJHV and AJHW and AJHY)
IF STYLE/REPLY CODE(s) C114 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJHY)
IF STYLE/REPLY CODE(s) C321 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJHY and AJJB and AJJH)
IF STYLE/REPLY CODE(s) C20 OR C48 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJJB)
IF STYLE/REPLY CODE(s) C74 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJJC)
IF STYLE/REPLY CODE(s) C72 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJJC and AJJH and AJJN)
IF STYLE/REPLY CODE(s) C50 OR C52 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGP and AJJN)
IF STYLE/REPLY CODE(s) C54 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ)
IF STYLE/REPLY CODE(s) C135 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJGU and AJHE and AJJC and AJJM and AJHG)
IF STYLE/REPLY CODE(s) C82 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJGU and AJHE and AJJC)
IF STYLE/REPLY CODE(s) C34 OR C55 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJGU and AJJB)
IF STYLE/REPLY CODE(s) C15 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJGV and AJJB and AJHG and AJHH)
IF STYLE/REPLY CODE(s) C92 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJHJ)
IF STYLE/REPLY CODE(s) C31 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJHM and AJHN and AJHY)
IF STYLE/REPLY CODE(s) C293 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJHV and AJHW)
IF STYLE/REPLY CODE(s) C291 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJHY and AJJB)
IF STYLE/REPLY CODE(s) C35 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGQ and AJJB)
IF STYLE/REPLY CODE(s) C84 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU)
IF STYLE/REPLY CODE(s) C59 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJGV and AJHE)
IF STYLE/REPLY CODE(s) C37, C79, C85, C86, C87, C89, C91, C202, C283, C296 OR C305 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJHE)
IF STYLE/REPLY CODE(s) C64 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJHE and AJHF and AJHR and AJJK and AJJL and AJJM)
IF STYLE/REPLY CODE(s) C75, C76, C77 OR C93 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJHE and AJHR and AJJM)
IF STYLE/REPLY CODE(s) C277 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJHE and AJHY and AJHZ and AJJC and AJJF)
IF STYLE/REPLY CODE(s) C83 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJHE and AJJB)
IF STYLE/REPLY CODE(s) C88, C203 OR C278 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJHE and AJJC and AJJF)
IF STYLE/REPLY CODE(s) C80 OR C98 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJHE and AJJM)
IF STYLE/REPLY CODE(s) C12 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJHV and AJJA and AJJB)
IF STYLE/REPLY CODE(s) C11 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJJA and AJJB)
IF STYLE/REPLY CODE(s) C58 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJJB)
IF STYLE/REPLY CODE(s) C309 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGU and AJJN)
IF STYLE/REPLY CODE(s) C116 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGV and AJGW and AJJC and AJJS)
IF STYLE/REPLY CODE(s) C63 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGV and AJHF and AJJD and AJJE and AJJS)
IF STYLE/REPLY CODE(s) C111 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGW)
IF STYLE/REPLY CODE(s) C300 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGW and AJHJ and AJHM and AJHN)
IF STYLE/REPLY CODE(s) C289 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGW and AJHN and AJHV)
IF STYLE/REPLY CODE(s) C28 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGW and AJHV)
IF STYLE/REPLY CODE(s) C29 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJGW and AJJA and AJJD)
IF STYLE/REPLY CODE(s) C294 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJHY and AJHZ and AJJB and AJHG)
IF STYLE/REPLY CODE(s) C27 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJHW and AJJH and AJJN)
IF STYLE/REPLY CODE(s) C18 OR C19 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJJB)
IF STYLE/REPLY CODE(s) C24 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJJB and AJJC and AJJH and AJJS)
IF STYLE/REPLY CODE(s) C23 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJJB and AJJC and AJJS)
IF STYLE/REPLY CODE(s) C22 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJJC)
IF STYLE/REPLY CODE(s) C324 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and ADUE and AHGN and AJGP and AJGQ and AJJC and AJJG)
IF STYLE/REPLY CODE(s) C46 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJJN)
IF STYLE/REPLY CODE(s) C221 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ADUE and AEJJ and AJGP and AJGW)
IF STYLE/REPLY CODE(s) C306 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ADXR and ADXS and ADYM and ADYN and AEJJ and AJGW and AJHV and AJHY)
IF STYLE/REPLY CODE(s) C154 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGP and AJGQ and AJGU and AJGW and AJHE)
IF STYLE/REPLY CODE(s) C215, C218 OR C326 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGP and AJGQ and AJGW)
IF STYLE/REPLY CODE(s) C223 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGP and AJGQ and AJGW and AJHE)
IF STYLE/REPLY CODE(s) C160 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGP and AJGQ and AJGW and AJHS)
IF STYLE/REPLY CODE(s) C329 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGP and AJGQ and AJGW and AJHY and AJHZ)
IF STYLE/REPLY CODE(s) C152, C153 OR C155 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGQ and AJGU and AJGW and AJHE and AJHS)
IF STYLE/REPLY CODE(s) C150 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGQ and AJGU and AJGW and AJHS)
IF STYLE/REPLY CODE(s) C163, C164, C165 OR C167 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGQ and AJGW)
IF STYLE/REPLY CODE(s) C225 OR C226 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AEJJ and AJGW and AJHJ and AJHK and AJHL and AJHT and AJHU)
IF STYLE/REPLY CODE(s) C302 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGP and AJGQ and AJGW and AJHY and AJHZ)
IF STYLE/REPLY CODE(s) C195 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGP and AJGQ and AJHY)
IF STYLE/REPLY CODE(s) C131 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGQ and AJGU and AJHE and AJHQ and AJHV and AJJC and AJJH)
IF STYLE/REPLY CODE(s) C149 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGQ and AJGU and AJHE and AJHS)
IF STYLE/REPLY CODE(s) C156 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGQ and AJGU and AJHS)
IF STYLE/REPLY CODE(s) C157 OR C158 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGQ and AJHS)
IF STYLE/REPLY CODE(s) C10 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGV and AJHF and AJHJ and AJJC)
IF STYLE/REPLY CODE(s) C13 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGW)
IF STYLE/REPLY CODE(s) C301 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJGQ and AJGW)
IF STYLE/REPLY CODE(s) C280 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJHJ and AJHK and AJJC)
IF STYLE/REPLY CODE(s) C224 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and AJHL and AJJC and AJJH)
IF STYLE/REPLY CODE(s) C102 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKW and ABMK and AJJC)
IF STYLE/REPLY CODE(s) C247 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGP and AJGU and AJGW and AJHE and AJJD and AJJN)
IF STYLE/REPLY CODE(s) C334 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGP and AJGW and AJHJ and AJHK)
IF STYLE/REPLY CODE(s) C237 OR C240 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGP and AJGW and AJHY)
IF STYLE/REPLY CODE(s) C242 OR C243 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGP and AJGW and AJHY and AJJD and AJJN)
IF STYLE/REPLY CODE(s) C246 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGP and AJGW and AJJB)
IF STYLE/REPLY CODE(s) C241 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGP and AJGW and AJJD)
IF STYLE/REPLY CODE(s) C244 OR C245 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGP and AJGW and AJJD and AJJN)
IF STYLE/REPLY CODE(s) C174 OR C175 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGQ and AJGW and AJHG)
IF STYLE/REPLY CODE(s) C250 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGU and AJGV and AJGW and AJHE and AJHF and AJJD and AJJS)
IF STYLE/REPLY CODE(s) C204 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGU and AJGW)
IF STYLE/REPLY CODE(s) C198, C199, C200 OR C201 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGU and AJGW and AJHE and AJJC and AJJF)
IF STYLE/REPLY CODE(s) C127 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGU and AJGW and AJHQ and AJJC and AJJF and AJJG)
IF STYLE/REPLY CODE(s) C253 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGU and AJGW and AJJC and AJJF)
IF STYLE/REPLY CODE(s) C248 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGV and AJGW and AJHF and AJHY and AJHZ and AJJC)
IF STYLE/REPLY CODE(s) C126 OR C251 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGV and AJGW and AJHY and AJHZ and AJJC)
IF STYLE/REPLY CODE(s) C332 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGW and AJHE and AJJC and AJJF)
IF STYLE/REPLY CODE(s) C337 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGW and AJJB and AJJC)
IF STYLE/REPLY CODE(s) C238, C239, C254, C255, C256 OR C258 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGW and AJJC)
IF STYLE/REPLY CODE(s) C252 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGW and AJJC and AJJD and AJJN)
IF STYLE/REPLY CODE(s) C124 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AEJJ and AJGW and AJJD and AJJN)
IF STYLE/REPLY CODE(s) C101 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGU and AJHE and AJJC and AJJF and AJJH and AJHG)
IF STYLE/REPLY CODE(s) C118 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGP and AJGU and AJGW and AJHE)
IF STYLE/REPLY CODE(s) C120 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGP and AJGW)
IF STYLE/REPLY CODE(s) C119 OR C276 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGP and AJGW and AJHY and AJJB)
IF STYLE/REPLY CODE(s) C284 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGP and AJJH and AJHG)
IF STYLE/REPLY CODE(s) C117 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGU and AJGW and AJHE and AJJC)
IF STYLE/REPLY CODE(s) C338 OR C339 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGU and AJGW and AJHE and AJJC and AJJF)
IF STYLE/REPLY CODE(s) C288 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGV and AJGW and AJJC)
IF STYLE/REPLY CODE(s) C121 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGW)
IF STYLE/REPLY CODE(s) C333 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGW and AJHE)
IF STYLE/REPLY CODE(s) C297 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGW and AJHG)
IF STYLE/REPLY CODE(s) C287 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and AJGW and AJJC)
IF STYLE/REPLY CODE(s) C335 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABMK and ABKW)
IF STYLE/REPLY CODE(s) C257 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AEJJ and AJGW)
IF STYLE/REPLY CODE(s) C190 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AEJJ and AJGW and AJJC and AJJF and AJJH and AJJJ and AJHG)
IF STYLE/REPLY CODE(s) C115 OR C311 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AJGU and AJHE and AJHJ)
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRLC22)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| CH10032 | C1 | ARCH SHAPE, HOLLOW CORE |
| CH10041 | C10 | BUMPER STRIP |
| CH10118 | C100 | BUMPER STRIP |
| CH10119 | C101 | BUMPER STRIP |
| CH10120 | C102 | BUMPER STRIP |
| CH10121 | C103 | BUMPER STRIP |
| CH10122 | C104 | BUMPER STRIP |
| CH10123 | C105 | BUMPER STRIP |
| CH10124 | C106 | BUMPER STRIP |
| CH10125 | C107 | BUMPER STRIP |
| CH10126 | C108 | BUMPER STRIP |
| CH10127 | C109 | BUMPER STRIP |
| CH10042 | C11 | BUMPER STRIP |
| CH10128 | C111 | BUMPER STRIP |
| CH10129 | C112 | BUMPER STRIP |
| CH10130 | C113 | BUMPER STRIP |
| CH10131 | C114 | BUMPER STRIP |
| CH10132 | C115 | BUMPER STRIP |
| CH10133 | C116 | BUMPER STRIP |
| CH10134 | C117 | BUMPER STRIP |
| CH10135 | C118 | BUMPER STRIP |
| CH10136 | C119 | BUMPER STRIP |
| CH10043 | C12 | BUMPER STRIP |
| CH10137 | C120 | BUMPER STRIP |
| CH10138 | C121 | BUMPER STRIP |
| CH10139 | C122 | BUMPER STRIP |
| CH10140 | C123 | CAM SHAPED, HOLLOW CORE |
| CH10141 | C124 | CAM SHAPED, HOLLOW CORE |
| CH10142 | C125 | CAM SHAPED, HOLLOW CORE |
| CH10143 | C126 | CAM SHAPED, HOLLOW CORE |
| CH10335 | C127 | CAM SHAPED, HOLLOW CORE |
| CH10144 | C128 | CAM SHAPED, HOLLOW CORE |
| CH10145 | C129 | CAM SHAPED, HOLLOW CORE |
| CH10044 | C13 | BUMPER STRIP |
| CH10146 | C130 | CAM SHAPED, MOLDED |
| CH10147 | C131 | DOUBLE OFFSET |
| CH10148 | C132 | DOUBLE OFFSET |
| CH10149 | C135 | DOUBLE OFFSET |
| CH10150 | C136 | DOUBLE OFFSET |
| CH10151 | C137 | HALF ROUND, HOLLOW CORE |
| CH10152 | C138 | HALF ROUND, HOLLOW CORE |
| CH10153 | C139 | HALF ROUND, HOLLOW CORE |
| CH10045 | C14 | BUMPER STRIP |
| CH10154 | C140 | HALF ROUND, HOLLOW CORE |
| CH10155 | C141 | HALF ROUND, HOLLOW CORE |
| CH10156 | C142 | HALF ROUND, HOLLOW CORE |
| CH10157 | C143 | HALF ROUND, HOLLOW CORE |
| CH10158 | C144 | HOLLOW CORE, CUSHION SEAL |
| CH10159 | C145 | HALF ROUND, HOLLOW CORE |
| CH10160 | C146 | HOLLOW CORE, CUSHION SEAL |
| CH10161 | C147 | HOLLOW CORE, CUSHION SEAL |
| CH10162 | C148 | HOLLOW CORE, CUSHION SEAL |
| CH10163 | C149 | HOLLOW CORE, CUSHION SEAL |
| CH10046 | C15 | BUMPER STRIP |
| CH10164 | C150 | HOLLOW CORE, CUSHION SEAL |
| CH10165 | C151 | HOLLOW CORE, CUSHION SEAL |
| CH10166 | C152 | HOLLOW CORE, CUSHION SEAL |
| CH10167 | C153 | HOLLOW CORE, CUSHION SEAL |
| CH10168 | C154 | HOLLOW CORE, CUSHION SEAL |
| CH10169 | C155 | HOLLOW CORE, CUSHION SEAL |
| CH10170 | C156 | HOLLOW CORE, CUSHION SEAL |
| CH10171 | C157 | HOLLOW CORE, CUSHION SEAL |
| CH10172 | C158 | HOLLOW CORE, CUSHION SEAL |
| CH10173 | C159 | HOLLOW CORE, CUSHION SEAL |
| CH10047 | C16 | BUMPER STRIP |
| CH10174 | C160 | HOLLOW CORE, CUSHION SEAL |
| CH10175 | C161 | HOLLOW CORE, CUSHION SEAL |
| CH10176 | C162 | HOLLOW CORE, CUSHION SEAL |
| CH10177 | C163 | HOLLOW CORE, CUSHION SEAL |
| CH10178 | C164 | HOLLOW CORE, CUSHION SEAL |
| CH10179 | C165 | HOLLOW CORE, CUSHION SEAL |
| CH10180 | C167 | HOLLOW CORE, CUSHION SEAL |
| CH10181 | C168 | HOLLOW CORE, CUSHION SEAL |
| CH10182 | C169 | HOLLOW CORE, CUSHION SEAL |
| CH10334 | C17 | BUMPER STRIP |
| CH10183 | C171 | HOLLOW CORE, CUSHION SEAL |
| CH10184 | C172 | HOLLOW CORE, CUSHION SEAL |
| CH10185 | C173 | HOLLOW CORE, CUSHION SEAL |
| CH10186 | C174 | HOLLOW CORE, CUSHION SEAL |
| CH10187 | C175 | HOLLOW CORE, CUSHION SEAL |
| CH10188 | C176 | HOLLOW CORE, CUSHION SEAL |
| CH10189 | C177 | HOLLOW CORE, CUSHION SEAL |
| CH10190 | C179 | HOLLOW CORE, CUSHION SEAL |
| CH10048 | C18 | BUMPER STRIP |
| CH10191 | C180 | HOLLOW CORE, CUSHION SEAL |
| CH10192 | C181 | HOLLOW CORE, CUSHION SEAL |
| CH10193 | C182 | HOLLOW CORE, CUSHION SEAL |
| CH10194 | C183 | HOLLOW CORE, CUSHION SEAL |
| CH10195 | C184 | HOLLOW CORE, CUSHION SEAL |
| CH10196 | C186 | HOLLOW CORE, CUSHION SEAL |
| CH10197 | C187 | HOLLOW CORE, CUSHION SEAL |
| CH10198 | C188 | HOLLOW CORE, CUSHION SEAL |
| CH10199 | C189 | HOLLOW CORE, CUSHION SEAL |
| CH10049 | C19 | BUMPER STRIP |
| CH10200 | C190 | HOLLOW CORE, CUSHION SEAL |
| CH10201 | C191 | HOLLOW CORE, CUSHION SEAL |
| CH10202 | C193 | HOLLOW CORE, CUSHION SEAL |
| CH10203 | C194 | HOLLOW CORE, CUSHION SEAL |
| CH10204 | C195 | HOLLOW CORE, CUSHION SEAL |
| CH10205 | C196 | HOLLOW CORE, CUSHION SEAL |
| CH10206 | C198 | HOLLOW CORE, DOUBLE FLANGE |
| CH10207 | C199 | HOLLOW CORE, DOUBLE FLANGE |
| CH10033 | C2 | ARCH SHAPE, HOLLOW CORE |
| CH10050 | C20 | BUMPER STRIP |
| CH10208 | C200 | HOLLOW CORE, DOUBLE FLANGE |
| CH10209 | C201 | HOLLOW CORE, DOUBLE FLANGE |
| CH10210 | C202 | HOLLOW CORE, DOUBLE FLANGE |
| CH10211 | C203 | HOLLOW CORE, DOUBLE FLANGE |
| CH10212 | C204 | HOLLOW CORE, DOUBLE FLANGE |
| CH10336 | C205 | HOLLOW CORE, DOUBLE FLANGE |
| CH10213 | C206 | HOLLOW CORE, DOUBLE FLANGE |
| CH10214 | C208 | HOLLOW CORE, DOUBLE FLANGE |
| CH10215 | C209 | HOLLOW SECTION, BASE FLANGE |
| CH10051 | C21 | BUMPER STRIP |
| CH10216 | C211 | HOLLOW SECTION, BASE FLANGE |
| CH10217 | C212 | HOLLOW SECTION, BASE FLANGE |
| CH10218 | C213 | HOLLOW SECTION, BASE FLANGE |
| CH10219 | C214 | HOLLOW SECTION, BASE FLANGE |
| CH10220 | C215 | HOLLOW SECTION, BASE FLANGE |
| CH10221 | C216 | HOLLOW SECTION, BASE FLANGE |
| CH10222 | C218 | HOLLOW SECTION, BASE FLANGE |
| CH10052 | C22 | BUMPER STRIP |
| CH10223 | C220 | HOLLOW SECTION, BASE FLANGE |
| CH10224 | C221 | HOLLOW SECTION, BASE FLANGE |
| CH10225 | C223 | HOLLOW SECTION, BASE FLANGE |
| CH10226 | C224 | MOLDING |
| CH10227 | C225 | MOLDING |
| CH10228 | C226 | MOLDING |
| CH10229 | C227 | MOLDING |
| CH10230 | C228 | RECTANGULAR, CELLULAR CORE |
| CH10231 | C229 | RECTANGULAR, HOLLOW CORE |
| CH10053 | C23 | BUMPER STRIP |
| CH10232 | C230 | RECTANGULAR, HOLLOW CORE |
| CH10233 | C232 | RECTANGULAR, HOLLOW CORE |
| CH10234 | C233 | RECTANGULAR, HOLLOW CORE |
| CH10235 | C234 | RECTANGULAR, HOLLOW CORE |
| CH10236 | C235 | RECTANGULAR, HOLLOW CORE |
| CH10237 | C236 | RECTANGULAR, HOLLOW CORE |
| DQ00698 | C237 | ROUND, CELLULAR RUBBER CORE |
| CH10238 | C238 | ROUND, CELLULAR RUBBER CORE |
| CH10239 | C239 | ROUND, CELLULAR RUBBER CORE |
| CH10054 | C24 | BUMPER STRIP |
| CH10240 | C240 | ROUND, HOLLOW CORE |
| CH10241 | C241 | ROUND, HOLLOW CORE |
| CH10242 | C242 | ROUND, HOLLOW CORE |
| CH10243 | C243 | ROUND, HOLLOW CORE |
| CH10244 | C244 | ROUND, HOLLOW CORE |
| DQ00699 | C245 | ROUND, HOLLOW CORE |
| CH10245 | C246 | ROUND, HOLLOW CORE |
| CH10246 | C247 | ROUND, HOLLOW CORE |
| CH10247 | C248 | ROUND, HOLLOW CORE |
| CH10248 | C249 | ROUND, HOLLOW CORE |
| CH10055 | C25 | BUMPER STRIP |
| CH10249 | C250 | ROUND, HOLLOW CORE |
| CH10250 | C251 | ROUND, HOLLOW CORE |
| CH10251 | C252 | ROUND, HOLLOW CORE |
| CH10252 | C253 | ROUND, HOLLOW CORE |
| CH10253 | C254 | ROUND, HOLLOW CORE |
| CH10254 | C255 | ROUND, HOLLOW CORE |
| CH10255 | C256 | ROUND, HOLLOW CORE |
| CH10256 | C257 | ROUND, HOLLOW CORE |
| CH10257 | C258 | ROUND HOLLOW CORE, RUBBER INSERT |
| CH10258 | C259 | ROUND OFFSET, CELLULAR RUBBER CORE |
| CH10056 | C26 | BUMPER STRIP |
| CH10259 | C260 | ROUND OFFSET, HOLLOW CORE |
| CH10260 | C261 | ROUND OFFSET, HOLLOW CORE |
| CH10261 | C262 | ROUND OFFSET, HOLLOW CORE |
| CH10262 | C263 | ROUND OFFSET, HOLLOW CORE |
| CH10263 | C265 | ROUND OFFSET, HOLLOW CORE |
| CH10264 | C266 | ROUND, MOLDED |
| CH10265 | C267 | TAPERED, DOUBLE FLANGE |
| CH10266 | C268 | TRIANGULAR, HOLLOW CORE |
| CH10057 | C27 | BUMPER STRIP |
| CH10267 | C270 | TRIANGULAR, HOLLOW CORE |
| CH10268 | C271 | TRIANGULAR, HOLLOW CORE |
| CH10269 | C272 | TRAPEZOID, HOLLOW CORE |
| CH10270 | C273 | BUMPER STRIP |
| CH10271 | C275 | BUMPER STRIP |
| CH10272 | C276 | BUMPER STRIP |
| CH10273 | C277 | BUMPER STRIP |
| CH10274 | C278 | BUMPER STRIP |
| CH10058 | C28 | BUMPER STRIP |
| CH10275 | C280 | BUMPER STRIP |
| CH10276 | C281 | BUMPER STRIP |
| CH10277 | C282 | BUMPER STRIP |
| CH10279 | C283 | BUMPER STRIP |
| CH10278 | C284 | BUMPER STRIP |
| CH10280 | C285 | BUMPER STRIP |
| CH10281 | C286 | BUMPER STRIP |
| CH10282 | C287 | BUMPER STRIP |
| CH10283 | C288 | BUMPER STRIP |
| CH10284 | C289 | BUMPER STRIP |
| CH10059 | C29 | BUMPER STRIP |
| CH10285 | C290 | BUMPER STRIP |
| CH10286 | C291 | BUMPER STRIP |
| CH10287 | C293 | BUMPER STRIP |
| CH10288 | C294 | BUMPER STRIP |
| CH10289 | C296 | BUMPER STRIP |
| CH10290 | C297 | BUMPER STRIP |
| CH10291 | C298 | BUMPER STRIP |
| CH10292 | C299 | BUMPER STRIP |
| CH10034 | C3 | ARCH SHAPE, HOLLOW CORE |
| CH10060 | C30 | BUMPER STRIP |
| CH10293 | C300 | BUMPER STRIP |
| CH10294 | C301 | BUMPER STRIP |
| CH10295 | C302 | BUMPER STRIP |
| CH10296 | C303 | RECTANGULAR, BUMPER STRIP |
| CH10297 | C304 | BUMPER STRIP |
| CH10298 | C305 | BUMPER STRIP |
| CH10299 | C306 | BUMPER STRIP |
| CH10300 | C307 | BUMPER STRIP |
| CH10301 | C309 | BUMPER STRIP |
| CH10061 | C31 | BUMPER STRIP |
| CH10302 | C310 | BUMPER STRIP |
| CH10303 | C311 | BUMPER STRIP |
| CH10304 | C312 | BUMPER STRIP |
| CH10305 | C313 | BUMPER STRIP |
| CH10306 | C314 | BUMPER STRIP |
| CH10307 | C315 | BUMPER STRIP |
| CH10308 | C316 | ARCH SHAPE, HOLLOW CORE |
| CH10309 | C317 | ARCH SHAPE, HOLLOW CORE |
| CH10310 | C318 | HOLLOW SECTION, BASE FLANGE |
| CH10311 | C319 | HOLLOW CORE, CUSHION SEAL |
| CH10062 | C32 | BUMPER STRIP |
| CH10312 | C321 | TRIANGULAR, HOLLOW CORE |
| CH10313 | C322 | ROUND OFFSET, HOLLOW CORE |
| CH10314 | C323 | HOLLOW CORE, CUSHION SEAL |
| CH10315 | C324 | HOLLOW CORE, CUSHION SEAL |
| CH10316 | C325 | ROUND OFFSET, HOLLOW CORE |
| CH10317 | C326 | HOLLOW SECTION, BASE FLANGE |
| CH10318 | C328 | HOLLOW CORE, CUSHION SEAL |
| CH10319 | C329 | HOLLOW SECTION, BASE FLANGE |
| CH10063 | C33 | BUMPER STRIP |
| CH10320 | C330 | HOLLOW CORE, CUSHION SEAL |
| CH10321 | C331 | ROUND OFFSET, HOLLOW CORE |
| CH10322 | C332 | ROUND, SOLID, DOUBLE FLANGE |
| CH10323 | C333 | ROUND, SOLID, DOUBLE FLANGE |
| CH10324 | C334 | DOUBLE ROUND, HOLLOW CORE |
| CH10325 | C335 | QUARTER ROUND, HOLLOW, DOUBLE FLANGE |
| CH10326 | C336 | DOUBLE ROUND, HOLLOW CORE |
| CH10327 | C337 | ROUND, HOLLOW CORE |
| CH10328 | C338 | ROUND, SOLID, DOUBLE FLANGE |
| CH10329 | C339 | ROUND, SOLID, DOUBLE FLANGE |
| CH10064 | C34 | BUMPER STRIP |
| CH10065 | C35 | BUMPER STRIP |
| CH10066 | C36 | BUMPER STRIP |
| CH10067 | C37 | BUMPER STRIP |
| CH10068 | C38 | BUMPER STRIP |
| CH10069 | C39 | BUMPER STRIP |
| CH10035 | C4 | ARCH SHAPE, HOLLOW CORE |
| CH10070 | C41 | BUMPER STRIP |
| CH10071 | C42 | BUMPER STRIP |
| CH10072 | C43 | BUMPER STRIP |
| CH10073 | C44 | BUMPER STRIP |
| CH10074 | C46 | BUMPER STRIP |
| CH10075 | C47 | BUMPER STRIP |
| CH10076 | C48 | BUMPER STRIP |
| CH10036 | C5 | ARCH SHAPE, HOLLOW CORE |
| CH10077 | C50 | BUMPER STRIP |
| CH10078 | C52 | BUMPER STRIP |
| CH10079 | C54 | BUMPER STRIP |
| CH10080 | C55 | BUMPER STRIP |
| CH10081 | C57 | BUMPER STRIP |
| CH10082 | C58 | BUMPER STRIP |
| CH10083 | C59 | BUMPER STRIP |
| CH10037 | C6 | ARCH SHAPE, HOLLOW CORE |
| CH10084 | C61 | BUMPER STRIP |
| CH10085 | C62 | BUMPER STRIP |
| CH10086 | C63 | BUMPER STRIP |
| CH10087 | C64 | BUMPER STRIP |
| CH10088 | C68 | BUMPER STRIP |
| CH10089 | C69 | BUMPER STRIP |
| CH10038 | C7 | ARCH SHAPE, HOLLOW CORE |
| CH10095 | C70 | BUMPER STRIP |
| CH10096 | C71 | BUMPER STRIP |
| CH10097 | C72 | BUMPER STRIP |
| CH10098 | C73 | BUMPER STRIP |
| CH10099 | C74 | BUMPER STRIP |
| CH10100 | C75 | BUMPER STRIP |
| CH10101 | C76 | BUMPER STRIP |
| CH10102 | C77 | BUMPER STRIP |
| CH10103 | C78 | BUMPER STRIP |
| CH10104 | C79 | BUMPER STRIP |
| CH10039 | C8 | BEADED CHANNEL |
| CH10105 | C80 | BUMPER STRIP |
| CH10106 | C81 | BUMPER STRIP |
| CH10091 | C82 | BUMPER STRIP |
| CH10092 | C83 | BUMPER STRIP |
| CH10093 | C84 | BUMPER STRIP |
| CH10090 | C85 | BUMPER STRIP |
| CH10094 | C86 | BUMPER STRIP |
| CH10107 | C87 | BUMPER STRIP |
| CH10108 | C88 | BUMPER STRIP |
| CH10109 | C89 | BUMPER STRIP |
| CH10040 | C9 | BUMPER STRIP |
| CH10110 | C90 | BUMPER STRIP |
| CH10111 | C91 | BUMPER STRIP |
| CH10112 | C92 | BUMPER STRIP |
| CH10114 | C93 | BUMPER STRIP |
| CH10113 | C94 | BUMPER STRIP |
| CH10115 | C95 | BUMPER STRIP |
| CH10116 | C96 | BUMPER STRIP |
| CH10117 | C98 | BUMPER STRIP |
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJAA2.0*;ABKWJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABMK*JOVERALL WIDTH
AN OVERALL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABMKJAA2.0*;ABMKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABRF*JCENTER TO CENTER DISTANCE BETWEEN HOLES
THE CENTER TO CENTER DISTANCE BETWEEN HOLES ON THE ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRFJAC2.0*;ABRFJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUE*JAPERTURE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN APERTURE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUEJAB2.0*;ADUEJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADXJ*JLEFT SIDE FLANGE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADXJJAC2.0*;ADXJJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADXK*JRIGHT SIDE FLANGE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADXKJAA2.0*;ADXKJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADXL*JLEFT SIDE FLANGE THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADXLJAC2.0*;ADXLJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADXM*JRIGHT SIDE FLANGE THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADXMJAB2.0*;ADXMJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADXR*JLEFT SIDE TOP FLANGE THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADXRJAC2.0*;ADXRJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADXS*JRIGHT SIDE TOP FLANGE THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADXSJAC2.0*;ADXSJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADYF*JLEFT SIDE FLANGE TOP OUTER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADYFJAB2.0*;ADYFJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADYG*JLEFT SIDE FLANGE TOP INNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADYGJAA2.0*;ADYGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADYJ*JRIGHT SIDE FLANGE TOP OUTER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADYJJAA2.0*;ADYJJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADYM*JLEFT SIDE TOP FLANGE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADYMJAC2.0*;ADYMJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADYN*JRIGHT SIDE TOP FLANGE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADYNJAB2.0*;ADYNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADYP*JOUTER RADIUS WHERE LEFT FLANGE JOINS TOP FLANGE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADYPJAA2.0*;ADYPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADYR*JOUTER RADIUS WHERE RIGHT FLANGE JOINS TOP FLANGE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADYRJAA2.0*;ADYRJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AEJJ*JINSIDE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEJJJAC2.0*;AEJJJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AHGN*JAPERTURE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHGNJAB2.0*;AHGNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGM*JOUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGMJAB2.0*;AJGMJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGN*JLEFT SIDE FLANGE TOP RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGNJAA2.0*;AJGNJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGP*JBASE FLANGE THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGPJAA2.0*;AJGPJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGQ*JBASE FLANGE WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF A BASE FLANGE,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGQJAB2.0*;AJGQJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGU*JFIRST SLOT/GROOVE DEPTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGUJAC2.0*;AJGUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGV*JFIRST OFFSET HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGVJAB2.0*;AJGVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGWJOUTSIDE RADIUS
A MEASUREMENT OF A STRAIGHT LINE DRAWN FROM THE CENTER OF A CIRCLE TO ANY PART OF ITS CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGWJAC2.0*;AJGWJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGX*JOUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGXJAB2.0*;AJGXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJGZ*JRIGHT SIDE FLANGE TOP RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJGZJAB2.0*;AJGZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHE*JFIRST SLOT/GROOVE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHEJAC2.0*;AJHEJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHF*JFIRST OFFSET WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHFJAC2.0*;AJHFJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHJ*JFIRST DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHJJAA2.0*;AJHJJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHK*JSECOND DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHKJAC2.0*;AJHKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHL*JANCHOR FLANGE/BUTTON CENTER TO CENTER DISTANCE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHLJAB2.0*;AJHLJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHM*JHOLE CENTER TO BASE DISTANCE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHMJAA2.0*;AJHMJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHN*JHOLE CENTER TO RIGHT SIDE DISTANCE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHNJAB2.0*;AJHNJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHQ*JLOWER FLANGE EDGE TO BASE DISTANCE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHQJAC2.0*;AJHQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHR*JSECOND SLOT/GROOVE DEPTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHRJAB2.0*;AJHRJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHS*JCUSHION HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHSJAA2.0*;AJHSJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHT*JANCHOR FLANGE/BUTTON LOWER PORTION HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHTJAC2.0*;AJHTJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHU*JANCHOR FLANGE/BUTTON UPPER PORTION HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHUJAC2.0*;AJHUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHV*JFIRST CORNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHVJAB2.0*;AJHVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHW*JSECOND CORNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHWJAB2.0*;AJHWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHX*JTHIRD CORNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHXJAC2.0*;AJHXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHY*JFIRST FILLET RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHYJAA2.0*;AJHYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJHZ*JSECOND FILLET RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJHZJAA2.0*;AJHZJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJA*JFIRST GROOVE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJAJAC2.0*;AJJAJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJB*JFIRST TIP RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJBJAA2.0*;AJJBJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJC*JFIRST/TOP FLANGE THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJCJAB2.0*;AJJCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJD*JFIRST TIP/END THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJDJAB2.0*;AJJDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJE*JSECOND TIP/END THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJEJAC2.0*;AJJEJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJF*JSECOND FLANGE THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJFJAA2.0*;AJJFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJG*JISTHMUS WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJGJAB2.0*;AJJGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJH*JFIRST/TOP FLANGE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJHJAB2.0*;AJJHJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJJ*JSECOND FLANGE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJJJAA2.0*;AJJJJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJK*JSECOND OFFSET WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJKJAC2.0*;AJJKJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJL*JTHIRD OFFSET WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJLJAA2.0*;AJJLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJMJSECOND SLOT/GROOVE WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJMJAA2.0*;AJJMJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJN*JFIRST TIP WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJNJAC2.0*;AJJNJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJP*JLEG THICKNESS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJPJAB2.0*;AJJPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJQ*JLEFT SIDE LEG HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJQJAC2.0*;AJJQJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJR*JRIGHT SIDE LEG HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJRJAB2.0*;AJJRJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJJS*JRIGHT SIDE OFFSET TO END DISTANCE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJJSJAB2.0*;AJJSJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADXZ*BLEFT INSIDE ANGLE IN DEG
NONE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ADXZB2.0)
ADYA*BRIGHT INSIDE ANGLE IN DEG
NONE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ADYAB2.0)
AJHG*BFIRST ANGLE IN DEG
NONE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AJHGB2.0)
AJHH*BSECOND ANGLE IN DEG
NONE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(AJHHB2.0)
ABRYJLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAA2.0*;ABRYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AEEDSLK000*;MATT3AEEDSLK000$DPCAB00*;MATT3AEEDSLK000$$DPCAB00*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CMA | JACKET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| CKA000 | CORK |
| ZSG000 | FABRIC,FIBER,ARAMID |
| FG0000 | FIBERGLASS |
| GSB000 | GLASS FIBER |
| FBB000 | NYLON |
| PCA000 | PLASTIC |
| PCCM00 | PLASTIC CELLULAR |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBB00 | PLASTIC METHACRYLATE |
| PCCB00 | PLASTIC NYLON |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE |
| PCQ000 | PLASTIC POLYCAPROLACTAM |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCY000 | PLASTIC POLYETHYLENE TEREPHTHALATE |
| PCZ000 | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE |
| PCAB00 | PLASTIC POLYOLEFIN |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAAAB | PLASTIC POLYUNDECANOAMIDE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE |
| PCAAW0 | PLASTIC STYRENE ACRYLONITRILE |
| PCAAF0 | PLASTIC STYRENE-BUTADIENE |
| PCAP00 | PLASTIC VINYL |
| PCP001 | PLASTIC, ETHYLENE-PROPYLENE |
| RCE000 | RUBBER |
| RCAD00 | RUBBER BUTADIENE NITRILE |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RCD000 | RUBBER CHLOROPRENE |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0010 | RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RCS000 | RUBBER FLUOROSILICONE |
| RC0014 | RUBBER FLUOROSILICONE CLASS FQ |
| RCAH00 | RUBBER FOAM |
| RCX000 | RUBBER ISOBUTYLENE ISOPRENE |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCA000 | RUBBER NATURAL |
| RCAC00 | RUBBER NEOPRENE |
| RC0001 | RUBBER POLYACRYLATE CLASS ACM |
| RCY000 | RUBBER POLYCHLOROPRENE |
| RC0003 | RUBBER POLYESTER URETHANE CLASS AU |
| RC0011 | RUBBER POLYETHER URETHANE CLASS EU |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0023 | RUBBER POLYSULFIDE CLASS T |
| RCZ000 | RUBBER POLYURETHANE |
| RCC000 | RUBBER SILICONE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| SLK000 | SILICONE |
| MSG000 | SPONGE |
| STA000 | STEEL |
| FAAAH0 | WOVEN FABRIC |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCLJMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3CMA | JACKET |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
AGXWDPHYSICAL FORM
THE RECOGNIZED SHAPE, CONFIGURATION, STRUCTURE, OR MOLD OF A SUBSTANCE, NATURAL OR REFINED, THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Enter the applicable reply code from the table below
(AGXWDQH*;AGXWDAAGX$DAW*)
| Table 1 |
| Reply Code (AE98) | Reply |
| AV | CELLULAR |
| QH | FOAM-IN-PLACE |
| AACJ | RECTANGULAR |
| AAGX | ROLL |
| AW | SOLID |
AASFJNONMETALLIC HARDNESS RATING
A NUMERIC VALUE THAT REFLECTS THE HARDNESS OF A NONMETALLIC ITEM WHEN USED IN CONJUNCTION WITH A HARDNESS RATING SCALE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASFJASD2.0*;AASFJBSD2.0$$JCSD2.1*)
| Table 1 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 2 |
| Reply Code (AC26) | Reply |
| PS | PLASTOMETER SCALE |
| RE | ROCKWELL E |
| RL | ROCKWELL L |
| RM | ROCKWELL M |
| RR | ROCKWELL R |
| SR | SHORE DUROMETER |
| SA | SHORE DUROMETER A |
| SD | SHORE DUROMETER D |
AASHJMINIMUM TENSILE STRENGTH
THE MAXIMUM LOAD IN TENSION APPLIED IN A LONGITUDINAL DIRECTION,PER UNIT OF CROSS-SECTIONAL AREA,THAT THE MATERIAL CAN WITHSTAND WITHOUT RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(AASHJV2*)
| Table 1 |
| Reply Code (AB18) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| V | POUNDS PER SQUARE INCH |
ABJHJTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
ADZC*DENVIRONMENTAL PROTECTION
THE ENVIRONMENTAL ELEMENTS OR CONDITIONS THAT AN ITEM IS DESIGNED OR PROTECTED TO RESIST OR WITHSTAND SATISFACTORILY.
Enter the applicable reply code from the table below
(ADZCDACP*;ADZCDABN$DABY*;ADZCDABN$$DABY*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| ABY | ACID RESISTANT |
| ABZ | ALCOHOL RESISTANT |
| DNV | AMMONIA RESISTANT |
| AEH | COOLANT |
| AAC | CORROSION RESISTANT |
| DNT | CRACK |
| AAJ | FIRE RESISTANT |
| AGC | FIRE RETARDANT |
| ACL | FLAME RESISTANT |
| AJN | FLEX RESISTANT |
| AAU | FLUID RESISTANT |
| AAL | FUEL RESISTANT |
| AEJ | FUEL, AROMATIC |
| ACQ | GREASE RESISTANT |
| AJG | HEAT AGING |
| AGD | HEAT DRY |
| AGE | HIGH TEMPERATURE |
| AEL | HYDRAULIC FLUID |
| AGP | HYDROCARBON |
| AGF | LOW TEMPERATURE |
| ACC | MILDEW RESISTANT |
| AAW | MOISTURE RESISTANT |
| AAX | OIL RESISTANT |
| AJC | OXIDATION RESISTANT |
| AJS | OXYGEN RESISTANT |
| ACN | OZONE RESISTANT |
| ACP | PETROLEUM RESISTANT |
| ABA | SALT WATER RESISTANT |
| ABE | SHOCK RESISTANT |
| AEF | STAIN RESISTANT |
| AEN | TEAR RESISTANT |
| AHL | ULTRAVIOLET LIGHT RESISTANT |
| ABJ | VIBRATION RESISTANT |
| AJT | WARP/TWIST |
| ACM | WATER RESISTANT |
| ABK | WATERPROOF |
| DNU | WEAR RESISTANT |
| ABN | WEATHER RESISTANT |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information