A rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes:all covers not specifically designed to provide access for the purposes listed above.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED29785*)
ADQBDSECURING DEVICE TYPE
INDICATES THE TYPE OF DEVICE USED TO FASTEN THE ITEM.
Enter the applicable reply code from the table below
(ADQBDAF*;ADQBDAA$DAD*;ADQBDAA$$DAD*)
| Table 1 |
| Reply Code (AC52) | Reply |
| AA | ELBOW CATCH |
| AB | FLUSH CATCH |
| AC | FRICTION CATCH |
| AD | HINGE |
| GV | NONSPECIFIC |
| AE | PAWL |
| AF | SLIDE FASTENER |
| JF | SPECIAL |
| AG | SPRING CLIP |
| AH | STRAP CLAMP |
| AJ | THREADED FASTENER |
| AK | TURNLOCK FASTENER |
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable reply code from the table below
(MATTDGFA000*;MATTDST0302$DAL0045*;MATTDST0302$$DAL0045*)
| Table 1 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| AL1100 | ALUMINUM ALLOY 1100 |
| AL2014 | ALUMINUM ALLOY 2014 |
| AL2017 | ALUMINUM ALLOY 2017 |
| AL2024 | ALUMINUM ALLOY 2024 |
| AL2219 | ALUMINUM ALLOY 2219 |
| AL3003 | ALUMINUM ALLOY 3003 |
| AL0308 | ALUMINUM ALLOY 308.0 |
| AL0035 | ALUMINUM ALLOY 319.0 |
| AL0045 | ALUMINUM ALLOY 355.0 |
| AL0046 | ALUMINUM ALLOY 356.0 |
| AL0051 | ALUMINUM ALLOY 357.0 |
| AL0029 | ALUMINUM ALLOY 360.0 |
| AL0031 | ALUMINUM ALLOY 380.0 |
| AL0032 | ALUMINUM ALLOY 384.0 |
| AL0027 | ALUMINUM ALLOY 413.0 |
| AL5052 | ALUMINUM ALLOY 5052 |
| ZSU000 | ALUMINUM ALLOY 5059 |
| AL5083 | ALUMINUM ALLOY 5083 |
| AL5086 | ALUMINUM ALLOY 5086 |
| AL0059 | ALUMINUM ALLOY 535.0 |
| AL5456 | ALUMINUM ALLOY 5456 |
| AL6010 | ALUMINUM ALLOY 6010 |
| AL6061 | ALUMINUM ALLOY 6061 |
| AL6062 | ALUMINUM ALLOY 6062 |
| AL6063 | ALUMINUM ALLOY 6063 |
| AL7039 | ALUMINUM ALLOY 7039 |
| AL0047 | ALUMINUM ALLOY 705.0 |
| AL0048 | ALUMINUM ALLOY 707.0 |
| AL7075 | ALUMINUM ALLOY 7075 |
| AL7079 | ALUMINUM ALLOY 7079 |
| AL0049 | ALUMINUM ALLOY 713.0 |
| AL7178 | ALUMINUM ALLOY 7178 |
| AL0037 | ALUMINUM ALLOY A108 |
| AL0002 | ALUMINUM ALLOY A356.0 |
| AL0052 | ALUMINUM ALLOY A360.0 |
| AL0028 | ALUMINUM ALLOY A380.0 |
| AL0061 | ALUMINUM ALLOY A850.0 |
| AL0060 | ALUMINUM ALLOY C355.0 |
| CNA001 | CARBON FIBER |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| CU0069 | COPPER ALLOY 172 |
| CU0079 | COPPER ALLOY 260 |
| CU0080 | COPPER ALLOY 268 |
| CU0091 | COPPER ALLOY 360 |
| CU0099 | COPPER ALLOY 464 |
| CCA000 | COTTON |
| WDA000 | FIBERBOARD |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| GFA000 | GRAPHITE |
| FEA000 | IRON |
| FEB000 | IRON CAST |
| FEC000 | IRON MALLEABLE |
| MGA000 | MAGNESIUM |
| MGB000 | MAGNESIUM ALLOY |
| MG0001 | MAGNESIUM ALLOY AZ31B |
| MG0007 | MAGNESIUM ALLOY AZ63A |
| MG0008 | MAGNESIUM ALLOY AZ91C |
| MG0009 | MAGNESIUM ALLOY AZ92A |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PPA000 | PAPER |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCC000 | PLASTIC ACRYLATE |
| PCD000 | PLASTIC ACRYLIC |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCCX00 | PLASTIC ARAMID |
| PCH000 | PLASTIC EPOXY |
| PCBB00 | PLASTIC METHACRYLATE |
| PCK000 | PLASTIC METHYL METHACRYLATE |
| PCCB00 | PLASTIC NYLON |
| PCM000 | PLASTIC PHENOL FORMALDEHYDE (PMO) |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCR000 | PLASTIC POLYCARBONATE |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCAAAA | PLASTIC POLYPHENYLENE OXIDE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAP00 | PLASTIC VINYL |
| PCBD00 | PLASTIC VINYL CHLORIDE |
| RCE000 | RUBBER |
| RCC000 | RUBBER SILICONE |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| ST0802 | STEEL COMP 1.0114 |
| ST1005 | STEEL COMP 1005 |
| ST1006 | STEEL COMP 1006 |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1011 | STEEL COMP 1011 |
| ST1012 | STEEL COMP 1012 |
| ST1013 | STEEL COMP 1013 |
| ST1015 | STEEL COMP 1015 |
| ST1016 | STEEL COMP 1016 |
| ST1017 | STEEL COMP 1017 |
| ST1018 | STEEL COMP 1018 |
| ST1019 | STEEL COMP 1019 |
| ST1020 | STEEL COMP 1020 |
| ST1021 | STEEL COMP 1021 |
| ST1022 | STEEL COMP 1022 |
| ST1023 | STEEL COMP 1023 |
| ST1024 | STEEL COMP 1024 |
| ST1025 | STEEL COMP 1025 |
| ST1026 | STEEL COMP 1026 |
| ST1027 | STEEL COMP 1027 |
| ST1029 | STEEL COMP 1029 |
| ST1030 | STEEL COMP 1030 |
| ST1035 | STEEL COMP 1035 |
| ST1040 | STEEL COMP 1040 |
| ST1041 | STEEL COMP 1041 |
| ST1042 | STEEL COMP 1042 |
| ST1043 | STEEL COMP 1043 |
| ST1044 | STEEL COMP 1044 |
| ST1045 | STEEL COMP 1045 |
| ST1050 | STEEL COMP 1050 |
| ST1060 | STEEL COMP 1060 |
| ST1070 | STEEL COMP 1070 |
| ST1078 | STEEL COMP 1078 |
| ST1080 | STEEL COMP 1080 |
| ST1084 | STEEL COMP 1084 |
| ST1090 | STEEL COMP 1090 |
| ST1117 | STEEL COMP 1117 |
| ST1118 | STEEL COMP 1118 |
| ST1215 | STEEL COMP 1215 |
| ST0301 | STEEL COMP 301 |
| ST0302 | STEEL COMP 302 |
| ST0303 | STEEL COMP 303 |
| ST0304 | STEEL COMP 304 |
| ST0080 | STEEL COMP 304L |
| ST0316 | STEEL COMP 316 |
| ST0082 | STEEL COMP 316L |
| ST0321 | STEEL COMP 321 |
| ST0347 | STEEL COMP 347 |
| ST0410 | STEEL COMP 410 |
| ST4130 | STEEL COMP 4130 |
| ST4140 | STEEL COMP 4140 |
| ST0430 | STEEL COMP 430 |
| ST0630 | STEEL COMP 630 |
| ST0631 | STEEL COMP 631 |
| ST8630 | STEEL COMP 8630 |
| ST8640 | STEEL COMP 8640 |
| ST8740 | STEEL COMP 8740 |
| ST0016 | STEEL COMP B1113 |
| ST0028 | STEEL COMP E4340 |
| ST0046 | STEEL COMP MT1010 |
| STB000 | STEEL CORROSION RESISTING |
| ST1751 | STEEL UNS J13025 |
| ST1789 | STEEL UNS K11918 |
| ZRF000 | STEEL,ARMOR |
| STF000 | STEEL,CARBON |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| TT0052 | TITANIUM ALLOY UNS R56400 |
| TNA000 | TUNGSTEN |
| WDC000 | WOOD |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SHPE*DSHAPE
THE PHYSICAL CONFIGURATION OF THE ITEM.
Enter the applicable reply code from the table below
(SHPEDAND*;SHPEDAFC$DASL*;SHPEDAFC$$DASL*)
| Table 1 |
| Reply Code (AD07) | Reply |
| ABS | CIRCULAR |
| AFC | FLAT |
| AJG | IRREGULAR |
| AND | RECTANGULAR |
| ASL | SQUARE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable reply code from the table below
(SFTTDAAA012*;SFTTDPNA000$DCDA000*;SFTTDPNA000$$DCDA000*)
| Table 1 |
| Reply Code (SF01) | Reply |
| ALA000 | ALUMINUM ALLOY |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| AAA001 | CARC (CHEMICAL AGENT RESISTANT COATING) |
| AAA013 | CARC (CHEMICAL AGENT RESISTANT COATING), ALIPHATIC POLYURETHANE |
| AAA012 | CARC (CHEMICAL AGENT RESISTANT COATING), POWDER |
| AAA002 | CHEMICAL |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| DCC000 | DICHROMATE ZINC |
| ENA000 | ENAMEL |
| ENJ000 | ENAMEL ALKYD |
| END000 | ENAMEL BAKED |
| ENB000 | ENAMEL LUSTERLESS |
| ENF000 | ENAMEL SEMIGLOSS |
| LQA000 | LACQUER |
| LQD000 | LACQUER ACRYLIC |
| LQB000 | LACQUER ALUMINUM CELLULOSE |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PND000 | PAINT EPOXY |
| PNE000 | PAINT POLYURETHANE |
| PSA000 | PASSIVATE |
| AAA015 | PASSIVATED INORGANIC COATING |
| PHA000 | PHOSPHATE |
| PHD000 | PHOSPHATE ZINC |
| PCA000 | PLASTIC |
| PCS000 | PLASTIC EPOXY |
| PCF000 | PLASTIC POLYAMIDE |
| PCB000 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCH000 | PLASTIC VINYL |
| AAA011 | POLYURETHANE PAINT-LEAD,CADMIUM AND HEXAVALENT CHROMIUM FREE |
| AAA004 | POWDER COATED |
| PRA000 | PRIMER |
| PRF000 | PRIMER EPOXY |
| PRA001 | PRIMER EPOXY-LEAD AND CHROMIUM FREE |
| PRD000 | PRIMER EPOXY-POLYAMIDE |
| AAA019 | PRIMER EPOXY-WATERBORNE |
| PRC000 | PRIMER ZINC CHROMATE |
| ZNM000 | PRIMER-HEXAVALENT CHROMIUM FREE |
| AAA010 | PRIMER-LEAD AND HEXAVALENT CHROMIUM FREE |
| AGA000 | SILVER |
| SNA000 | TIN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
IF YOU ANSWER MRC STDC, YOU MUST ANSWER MRC (SFTT)
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 2 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ABGL)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ABGL and ADPD and ADPC)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNV and ADPD and ABGL and ADNY and ADPC)
IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPD and ADPB and ABGL and ADPC and ADPA)
IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPD and ADNZ and ABGL)
IF STYLE/REPLY CODE(s) 16 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPD and ADNZ and ADNW and ABGL)
IF STYLE/REPLY CODE(s) 19 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADNW and ADNV and ADPD and ADNZ and ABGL)
IF STYLE/REPLY CODE(s) 22 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPD and ADNZ and ABGL and ADNW and ADNV)
IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPA and ADPB and ADPC and ADPD and ABGL)
IF STYLE/REPLY CODE(s) 28 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNW and ADNV and ADPA and ADPC and ADNZ and ABGL and ADPB and ADPD)
IF STYLE/REPLY CODE(s) 31 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNW and ADNV and ADNY and ADPA and ADPB and ADPC and ADPD and ABGL)
IF STYLE/REPLY CODE(s) 34 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNW and ADNV and ADNY and ADPA and ADPB and ADPC and ADNZ and ADPD and ABGL)
IF STYLE/REPLY CODE(s) 37 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPA and ADPC and ADPK and ADPB and ADPD and ABGL)
IF STYLE/REPLY CODE(s) 40 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPA and ADPB and ADPC and ADPD and ABGL and ADPK and ADNZ and ADNV and ADNW)
IF STYLE/REPLY CODE(s) 43 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPA and ADPB and ADPD and ABGL and ADNW and ADPK and ADNV)
IF STYLE/REPLY CODE(s) 46 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPA and ADPC and ADNW and ADPK and ADNV and ADPB and ADPD and ADNZ and ABGL)
IF STYLE/REPLY CODE(s) 50 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNY and ADPC and ADPD and ABGL and ADNZ and ADPG and ADPF)
IF STYLE/REPLY CODE(s) 52 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADPC and ADPD and ADNY and ADNZ)
IF STYLE/REPLY CODE(s) 54 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADPD and ADPF and ADPG and ADNY and ADNZ)
IF STYLE/REPLY CODE(s) 59 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADPJ and ADPM and ASDB)
IF STYLE/REPLY CODE(s) 61 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX and ADPF and ADPG and ADPH and ADPM)
IF STYLE/REPLY CODE(s) 63 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPG and ADNY)
IF STYLE/REPLY CODE(s) 64 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADNY)
IF STYLE/REPLY CODE(s) 65 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 66 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNX and ADNY)
IF STYLE/REPLY CODE(s) 67 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNX and ADPF and ADPG and ADNY)
IF STYLE/REPLY CODE(s) 68 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADPG and ADNY and ADNZ)
IF STYLE/REPLY CODE(s) 69 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ABRY and ADNX and ADPG)
IF STYLE/REPLY CODE(s) 70 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABKG and ABRY)
IF STYLE/REPLY CODE(s) 71 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPG and ADNY and ADNZ)
IF STYLE/REPLY CODE(s) 72 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPA and ADPB and ADPG and ADNY)
IF STYLE/REPLY CODE(s) 73 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPA and ADPF and ADPG and ADPK and ADNY)
IF STYLE/REPLY CODE(s) 75 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX and ADPJ and ADPM)
IF STYLE/REPLY CODE(s) 77 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKV)
IF STYLE/REPLY CODE(s) 78 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKV and ADVJ)
IF STYLE/REPLY CODE(s) 79 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKV and ADVJ and BPCJ and ADNV)
IF STYLE/REPLY CODE(s) 80 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ABKV and ADPM)
IF STYLE/REPLY CODE(s) 82 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 83 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC)
IF STYLE/REPLY CODE(s) 84 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADNY and ADNV)
IF STYLE/REPLY CODE(s) 85 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNY)
IF STYLE/REPLY CODE(s) 86 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADNY)
IF STYLE/REPLY CODE(s) 87 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADNY)
IF STYLE/REPLY CODE(s) 88 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADNY)
IF STYLE/REPLY CODE(s) 89 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADNY)
IF STYLE/REPLY CODE(s) 90 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADNX and ADPC and ADPF and ADPG and ADNY)
IF STYLE/REPLY CODE(s) 92 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADPB and ADNZ)
IF STYLE/REPLY CODE(s) 93 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNX and ADPC and ADNY)
IF STYLE/REPLY CODE(s) 94 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADPF and ADNY and ADPG)
IF STYLE/REPLY CODE(s) 95 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 97 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABKG and ABRY)
IF STYLE/REPLY CODE(s) 99 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX)
IF STYLE/REPLY CODE(s) 101 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 103 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABKG and ABRY and ADNX)
IF STYLE/REPLY CODE(s) 104 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX and ADPM)
IF STYLE/REPLY CODE(s) 105 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADPD and ADPF and ADNY and ADNZ)
IF STYLE/REPLY CODE(s) 106 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABRY and ADPC and ADPD and ADPF and ADPG and ADNY and ADNZ)
IF STYLE/REPLY CODE(s) 108 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPB and ADPC and ADPD and ADPF and ADPG and ADNY and ADNZ and ADNV and ADPH)
IF STYLE/REPLY CODE(s) 109 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ADNX and ADPF and ADPG)
IF STYLE/REPLY CODE(s) 110 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPJ)
IF STYLE/REPLY CODE(s) 112 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABKG and ABRY and ADPJ and ADPM)
IF STYLE/REPLY CODE(s) 115 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 117 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPB and ADNZ and ADPM)
IF STYLE/REPLY CODE(s) 119 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPA and ADPB and ADNZ and ADPM)
IF STYLE/REPLY CODE(s) 122 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADNV and ADNW)
IF STYLE/REPLY CODE(s) 123 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPC and ADPD and ADNY and ADNZ and ADNV and ADNW)
IF STYLE/REPLY CODE(s) 124 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABKG and ABKV and ADPM)
IF STYLE/REPLY CODE(s) 125 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 126 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY)
IF STYLE/REPLY CODE(s) 127 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ADNX and ADPG)
IF STYLE/REPLY CODE(s) 128 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ADUP and ADNZ and ABRY)
IF STYLE/REPLY CODE(s) 129 WERE ENTERED FOR MRC ABMW, YOU MUST ANSWER MRC (ABGL and ABRY and ADPA and ADPB and ADPC and ADPD and BPYD and ADNY and ADNZ and ADNV and ADNW)
ABMW*LPERIPHERAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE PERIPHERAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ABMWL71)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AV10001 | 1 | RECTANGLE, NO HOLES |
| AV10010 | 10 | RECTANGLE, TWO HOLES |
| AV10101 | 101 | ROUND, THREE EARS AND HOLES |
| AV10103 | 103 | TRIANGLE, ROUNDED CORNERS, THREE HOLES |
| AV10104 | 104 | ROUND, ONE EAR, ONE OR MULTI HOLES |
| AV10105 | 105 | RECTANGLE, IRREGULAR ENDS, FOUR HOLES |
| AV10106 | 106 | OVAL, FOUR HOLES |
| AV10108 | 108 | OVAL, MULTI HOLES |
| AV10109 | 109 | ROUND, FOUR EARS AND HOLES |
| AV10110 | 110 | PENTAGON, NO HOLES |
| AV10112 | 112 | PENTAGON, MULTI HOLES |
| AV10115 | 115 | IRREGULAR PENTAGON, NO HOLES |
| AV10117 | 117 | IRREGULAR PENTAGON, THREE HOLES |
| AV10119 | 119 | IRREGULAR PENTAGON, FIVE HOLES |
| AV10122 | 122 | OVAL, MULTI HOLES |
| AV10123 | 123 | RECTANGLE, ROUNDED CORNERS, MULTI HOLES |
| AV10124 | 124 | ROUND, MULTI HOLES |
| AV10126 | 125 | DIAMOND, ROUNDED CORNERS, NO HOLES |
| AV10127 | 126 | BAND TYPE |
| AV10128 | 127 | TRIANGLE, STRAIGHT AND RADII SIDES, THREE HOLES |
| AV10129 | 128 | IRREGULAR OCTAGON |
| DQ01120 | 129 | TRAPEZOID, MULTI HOLE |
| AV10013 | 13 | RECTANGLE, FOUR HOLES |
| AV10016 | 16 | RECTANGLE, MULTI HOLES |
| AV10019 | 19 | RECTANGLE, MULTI HOLES |
| AV10022 | 22 | RECTANGLE, MULTI HOLES |
| AV10025 | 25 | RECTANGLE, FOUR HOLES |
| AV10028 | 28 | RECTANGLE, MULTI HOLES |
| AV10031 | 31 | RECTANGLE, MULTI HOLES |
| AV10034 | 34 | RECTANGLE, MULTI HOLES |
| AV10037 | 37 | RECTANGLE, EIGHT HOLES |
| AV10004 | 4 | RECTANGLE, ONE CENTER HOLE |
| AV10040 | 40 | RECTANGLE, MULTI HOLES |
| AV10043 | 43 | RECTANGLE, MULTI HOLES |
| AV10046 | 46 | RECTANGLE, MULTI HOLES |
| AV10050 | 50 | RECTANGLE, EARED CORNERS, FOUR HOLES |
| AV10052 | 52 | FOUR RADII SIDES, FOUR HOLES |
| AV10054 | 54 | RECTANGLE, ROUNDED CORNERS, FOUR EARS AN D HOLES |
| AV10059 | 59 | REGULAR POLYGON, MULTI HOLES |
| AV10061 | 61 | ROUND, MULTIEARS AND HOLES |
| AV10063 | 63 | IRREGULAR, TWO HOLES |
| AV10064 | 64 | IRREGULAR, TWO HOLES |
| AV10065 | 65 | ROUND, THREE EARS AND HOLES |
| AV10066 | 66 | IRREGULAR, TWO HOLES |
| AV10067 | 67 | ROUND, TWO EARS AND HOLES |
| AV10068 | 68 | IRREGULAR, THREE HOLES |
| AV10069 | 69 | ROUND, FOUR EARS AND HOLES, ONE LOBE |
| AV10007 | 7 | RECTANGLE, MULTI HOLES |
| AV10070 | 70 | RECTANGLE, FOUR HOLES, TWO LOBES |
| AV10071 | 71 | RECTANGLE, FOUR EARS AND HOLES |
| AV10072 | 72 | IRREGULAR, FOUR EARS, SIX HOLES |
| AV10073 | 73 | OVAL, SIX EARS AND HOLES |
| AV10075 | 75 | IRREGULAR POLYGON, ROUNDED CORNERS, MULTI HOLES |
| AV10077 | 77 | ROUND, NO HOLES |
| AV10078 | 78 | ROUND, ONE HOLE |
| AV10079 | 79 | ROUND, MULTI HOLES |
| AV10080 | 80 | ROUND, MULTI HOLES |
| AV10082 | 82 | OVAL, NO HOLES |
| AV10083 | 83 | OVAL, ONE HOLE |
| AV10084 | 84 | OVAL, MULTI HOLES |
| AV10085 | 85 | IRREGULAR, FLAT SIDES, RADII ENDS, TWO HOLES |
| AV10086 | 86 | DIAMOND, ROUNDED CORNERS, TWO HOLES |
| AV10087 | 87 | DIAMOND, ROUNDED CORNERS, TWO HOLES |
| AV10088 | 88 | OVAL, TWO HOLES |
| AV10089 | 89 | OVAL, TWO HOLES |
| AV10090 | 90 | ROUND, TWO EARS AND HOLES |
| AV10092 | 92 | IRREGULAR, FLAT SIDES, TWO HOLES |
| AV10093 | 93 | IRREGULAR, FLAT SIDES, TWO HOLES |
| AV10094 | 94 | RECTANGLE, TWO EARS AND HOLES |
| AV10095 | 95 | TRIANGLE, SHARP CORNERS, NO HOLES |
| AV10097 | 97 | TRIANGLE, ROUNDED CORNERS, THREE HOLES |
| AV10099 | 99 | TRIANGLE, RADII, THREE HOLES |
ATPP*ASLOT QUANTITY
THE NUMBER OF SLOTS IN THE ITEM.
Enter the numeric reply with a minimum of one digit.
(ATPPA10*)
CZNF*ACOLOR CHIP NUMBER
THE IDENTIFYING NUMBER FOR THE COLOR CHIP.
Enter the alpha-numeric reply with a minimum of one character.
(CZNFAU7)
HUES*DCOLOR
A CHARACTERISTIC OF LIGHT THAT CAN BE SPECIFIED IN TERMS OF LUMINANCE,DOMINANT WAVELENGTH,AND PURITY.
Enter the applicable reply code from the table below
(HUESDTA0000)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| GR0000 | GREEN |
| GR0494 | GREEN, 383 |
| TA0000 | TAN |
| TA0099 | TAN, 686A |
| TA0010 | TAN, DESERT |
| WH0000 | WHITE |
AFYK*AMOUNTING HOLE/SLOT QUANTITY
THE NUMBER OF HOLES/SLOTS PROVIDED FOR ATTACHMENT OF THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AFYKA10*)
CMLP*ATHREAD QUANTITY PER INCH
THE NUMBER OF THREADS ON THE ITEM PER LINEAR INCH MEASURED ON A LINE PARALLEL TO THE THREAD AXIS.
Enter the alpha-numeric reply with a minimum of one character.
(CMLPAG1)
AAJD*ATHREAD CLASS
A NUMERIC-ALPHA DESIGNATOR INDICATING THE PITCH DIAMETER TOLERANCE AND AN EXTERNAL OR INTERNAL THREAD.
Enter the alpha-numeric reply with a minimum of one character.
(AAJDAO3)
AASA*JTHREAD LENGTH
A MEASUREMENT OF THE EXTENT OF THREADS,INCLUDING INCOMPLETE THREADS,ALONG A LINE PARALLEL TO THE LONGITUDINAL AXIS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AASAJLB2.0*;AASAJLB2.0$$JLB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAJF*DTHREAD DIRECTION
THE DIRECTION OF THE THREAD WHEN VIEWED AXIALLY. A RIGHT-HAND THREAD WINDS IN A CLOCKWISE DIRECTION WHILE A LEFT-HAND THREAD WINDS IN A COUNTERCLOCKWISE DIRECTION.
Enter the applicable reply code from the table below
(AAJFDAAG)
| Table 1 |
| Reply Code (AA38) | Reply |
| AAG | LEFT-HAND |
| AAL | RIGHT-HAND |
ABGL*JWIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGLJAA2.0*;ABGLJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKG*JBOLT CIRCLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKGJAC2.0*;ABKGJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ACHY*DMOUNTING HOLE TYPE
INDICATES THE TYPE OF HOLES PROVIDED IN THE ITEM TO FACILITATE MOUNTING TO ANOTHER ITEM.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ACHY3EFIDU*;ACHY3EFIDU$DB*;ACHY3EFIDU$$DB*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BDK | FIRST HOLE |
| 3BDL | SECOND HOLE |
| 3BDM | THIRD HOLE |
| 3BEH | FOURTH HOLE |
| 3BEK | ALL HOLES |
| 3EFI | FIFTH HOLE |
| 3EFJ | SIXTH HOLE |
| 3EFK | SEVENTH HOLE |
| 3EFL | EIGHTH HOLE |
| 3EFM | NINTH HOLE |
| 3EFW | SINGLE HOLE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB68) | Reply |
| A | COUNTERBORED |
| B | COUNTERSUNK |
| AAA | OPEN ENDED SLOT |
| C | PLAIN |
| P | SLOTTED |
| D | THREADED |
| U | THRU HOLE |
| E | UNTHREADED |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAC2.0*;ABKVJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable reply code from the table below
(THSDDUN)
| Table 1 |
| Reply Code (AH06) | Reply |
| EM | M |
| NP | NPT |
| UN | UN |
| NE | UNEF |
| NF | UNF |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| NJ | UNIFIED NATIONAL JOINT (UNJ) |
| JC | UNJC |
ABRY*JLENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF ANY OBJECT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABRYJAB2.0*;ABRYJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ALBY*DUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter the applicable reply code from the table below
(ALBYDAHY)
| Table 1 |
| Reply Code (AH21) | Reply |
| AHX | AIRCRAFT |
| BCU | BOAT |
| BPX | COMBAT VEHICLE |
| BGH | FULL-TRACKED VEHICLE |
| ABX | HELICOPTER |
| AHY | SHIP |
| AMF | VEHICULAR |
ABTB*JMOUNTING HOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A MOUNTING HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABTB3AEEJLC2.0*;ABTB3AEEJLC2.0$JLC2.0*;ABTB3AEEJLC2.0$$JLC2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3BDK | FIRST HOLE |
| 3BDL | SECOND HOLE |
| 3BDM | THIRD HOLE |
| 3BEH | FOURTH HOLE |
| 3BEK | ALL HOLES |
| 3EFI | FIFTH HOLE |
| 3EFJ | SIXTH HOLE |
| 3EFK | SEVENTH HOLE |
| 3EFL | EIGHTH HOLE |
| 3EFM | NINTH HOLE |
| 3EFY | FIRST SIZE GROUP |
| 3EFZ | SECOND SIZE GROUP |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNX*JBODY RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNXJAB2.0*;ADNXJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPA*JDISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPAJAA2.0*;ADPAJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPB*JDISTANCE BETWEEN HOLE CENTERLINE AND FIRST HOLE ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPBJAA2.0*;ADPBJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPC*JDISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPCJAB2.0*;ADPCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPD*JDISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPDJAA2.0*;ADPDJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPF*JINVERTED RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPFJAA2.0*;ADPFJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPG*JEAR RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPGJAB2.0*;ADPGJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPK*JCORNER HOLE CENTERLINE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPKJAB2.0*;ADPKJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADUP*JOUTSIDE CORNER BEVEL LENGTH ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADUPJAC2.0*;ADUPJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADVJ*JBOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADVJJAA2.0*;ADVJJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPCJ*JDISTANCE BETWEEN HOLE CENTERS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BPCJJAA2.0*;BPCJJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
BPYD*JMINOR LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(BPYDJAB2.0*;BPYDJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNY*JDISTANCE BETWEEN HOLES ALONG LENGTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNYJAC2.0*;ADNYJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNZ*JDISTANCE BETWEEN HOLES ALONG WIDTH
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNZJAB2.0*;ADNZJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADNV*AHOLE QUANTITY ALONG LENGTH
NONE.
Enter the numeric reply with a minimum of one digit.
(ADNVA10*)
ADNW*AHOLE QUANTITY ALONG WIDTH
NONE.
Enter the numeric reply with a minimum of one digit.
(ADNWA10*)
ADPH*AEAR QUANTITY
NONE.
Enter the numeric reply with a minimum of one digit.
(ADPHA10*)
ADPJ*ACORNER QUANTITY
NONE.
Enter the numeric reply with a minimum of one digit.
(ADPJA10*)
ADPM*ABOLT CIRCLE HOLE QUANTITY
THE NUMBER OF HOLES IN A BOLT CIRCLE.
Enter the numeric reply with a minimum of one digit.
(ADPMA10*)
CYHY*AVEHICLE IDENTIFICATION DESIGNATOR
THE NAME OR COMBINED GROUP OF LETTERS,NUMERALS,AND/OR SYMBOLS WHICH IDENTIFY THE SPECIFIC VEHICLE.
Enter the alpha-numeric reply with a minimum of one character.
(CYHYAA7)
CKWB*DCORNER CUT TYPE
INDICATES THE TYPE OF CUT ON THE CORNER/S/.
Enter the applicable reply code from the table below
(CKWBDAA*;CKWBDER$DEQ*)
| Table 1 |
| Reply Code (AL18) | Reply |
| AA | BEVEL |
| EQ | ROUND |
| ER | SQUARE |
ADNU*JCORNER RADIUS
A MEASUREMENT OF A STRAIGHT LINE FROM THE MIDPOINT OF A ROUNDED CORNER TO ITS PERIPHERY.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADNUJAB2.0*;ADNUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPE*JCORNER BEVEL LENGTH
THE LENGTH OF A LINEAR BREAK AT AN ANGLE TO THE SURFACES FORMING THE EDGE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPEJAB2.0*;ADPEJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AXGY*DMOUNTING METHOD
THE MEANS OF ATTACHING THE ITEM.
Enter the applicable reply code from the table below
(AXGYDAAB*;AXGYDAGC$DAAL*;AXGYDAGC$$DAAL*)
| Table 1 |
| Reply Code (AM39) | Reply |
| AAC | BOLT |
| AGC | HINGE |
| AAB | INTEGRAL |
| AAH | MOUNTING BRACKETS |
| AAJ | MOUNTING CLAMPS |
| AAK | MOUNTING FLANGES |
| AAL | MOUNTING SLOTS |
| AAM | OPEN END MOUNTING SLOTS |
| AAD | PIN(S) |
| AAG | RIVET |
| ABW | SCREW |
| AAF | SETSCREW |
| AAE | STUD(S) |
IF STYLE/REPLY CODE(s) 1, 2 OR 3 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and ADPQ and AARX and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 4, 5 OR 6 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN and ADPQ and ADPR and ADJT and ADJU and ABKU)
IF STYLE/REPLY CODE(s) 7 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU and ADPN and ADPR and CWCJ and ADJT and ADJU)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (CWCJ and ADPN and ADPR)
IF STYLE/REPLY CODE(s) 9 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU and ADPN and ADPR)
IF STYLE/REPLY CODE(s) 10 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPX and ADPW and CWCJ and ADPR and ADPQ and AARX and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ and AARX and ABKU and ADPN)
IF STYLE/REPLY CODE(s) 12 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPX and ADPW and ADPN and ABKU and ADPQ and ADPR and AARX and ADPT and CWCJ)
IF STYLE/REPLY CODE(s) 13 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (CWCJ and ADPR and ADPQ and ADJT and ADPX and ADPW and ADJU and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 14 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and ADJT and ADPN and ADJU)
IF STYLE/REPLY CODE(s) 15 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN and CWCJ and ADPR and AARX)
IF STYLE/REPLY CODE(s) 16 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (CWCJ and AARX and ABKU and ADPN)
IF STYLE/REPLY CODE(s) 17 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU)
IF STYLE/REPLY CODE(s) 18 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPX and ADPW and ADPY and ADPN and ABKU and CWCJ and ADPQ and ADPR and AARX and AAVL)
IF STYLE/REPLY CODE(s) 19 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ and ADPR and ADJT and ADJU and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 20 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ and ADPR and AARX and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 21 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPX and ADPW and ADPP and ADPN and ADPQ and ADPR and AARX and ADPT and ABKU)
IF STYLE/REPLY CODE(s) 22 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPX and ADPW and ADPQ and ADPR and ADJT and ABKU and ADPN and ADPP and ADJU)
IF STYLE/REPLY CODE(s) 23 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN and ADPW and ADPX and CWCJ)
IF STYLE/REPLY CODE(s) 24 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPW and ADPN and ADPP and ADPQ)
IF STYLE/REPLY CODE(s) 25 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and AARX and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 26 OR 27 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR)
IF STYLE/REPLY CODE(s) 28 OR 29 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ABKU and ADPR)
IF STYLE/REPLY CODE(s) 30 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPQ and ADPR)
IF STYLE/REPLY CODE(s) 31 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJU and ADJT and ADPN and ABKU)
IF STYLE/REPLY CODE(s) 32 OR 33 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AARX and ADPR)
IF STYLE/REPLY CODE(s) 34 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPW and ADPQ and ADPV and AARX and ADPR and ABKU)
IF STYLE/REPLY CODE(s) 35 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPN and ADJT and ADPS and ADJU and ABKU)
IF STYLE/REPLY CODE(s) 36 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADPR and ADPN and ABKU and ADPP)
AAGR*LCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRL5)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AV10130 | 1 | SPHERICAL RECESS |
| AV10139 | 10 | CIRCULAR RECESS |
| AV10140 | 11 | CIRCULAR RECESS |
| AV10141 | 12 | CIRCULAR RECESS |
| AV10142 | 13 | OBLONG RECESS |
| AV10143 | 14 | SQUARE OR RECTANGULAR RECESS |
| AV10144 | 15 | CIRCULAR RECESS |
| AV10145 | 16 | CIRCULAR RECESS |
| AV10146 | 17 | LOUVERED OPENING |
| AV10125 | 18 | CIRCULAR RECESS |
| AV10165 | 19 | SQUARE OR RECTANGULAR RECESS |
| AV10131 | 2 | CIRCULAR RECESS |
| AV10166 | 20 | CIRCULAR RECESS |
| AV10167 | 21 | CIRCULAR RECESS |
| AV10168 | 22 | SQUARE OR RECTANGULAR RECESS |
| AV10169 | 23 | OBLONG RECESS |
| AV10170 | 24 | OBLONG RECESS |
| AV10171 | 25 | CIRCULAR RECESS |
| AV10147 | 26 | FLAT |
| AV10148 | 27 | FLAT W/OPEN CENTER |
| AV10149 | 28 | FLAT, ROUND RIB REINFORCED |
| AV10150 | 29 | FLAT, SQUARE OR RECTANGULAR RIB REINFORCED |
| AV10132 | 3 | CIRCULAR RECESS |
| AV10151 | 30 | ARCHED |
| AV10152 | 31 | RECESS, OTHER THAN ROUND |
| AV10153 | 32 | CYLINDER W/O LINER |
| AV10154 | 33 | CYLINDER W/LINER |
| AV10155 | 34 | CIRCULAR RECESS |
| AV10156 | 35 | SQUARE OR RECTANGULAR RECESS |
| DQ00913 | 36 | EXTENDED SIDE |
| AV10133 | 4 | OBLONG RECESS |
| AV10134 | 5 | OBLONG RECESS |
| AV10135 | 6 | SQUARE OR RECTANGULAR RECESS |
| AV10136 | 7 | SQUARE OR RECTANGULAR RECESS |
| AV10137 | 8 | SQUARE OR RECTANGULAR RECESS |
| AV10138 | 9 | RECESS, SAME SHAPE AS THE PERIPHERY |
AARX*JINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAA2.0*;AARXJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AAVL*JPILOT DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THAT PORTION USED TO GUIDE THE ITEM AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAVLJAC2.0*;AAVLJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKU*JFLANGE THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A FLANGE,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKUJAA2.0*;ABKUJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAB2.0*;ADJTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAB2.0*;ADJUJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPN*JFIRST RECESS INSIDE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPNJAC2.0*;ADPNJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPP*JSECOND RECESS INSIDE HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPPJAB2.0*;ADPPJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPQ*JINSIDE CORNER RADIUS
A MEASUREMENT OF THE LINE SEGMENT EXTENDING FROM THE CENTER OF A CIRCLE OR SPHERE TO THE CURVE OF AN INSIDE CORNER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPQJAA2.0*;ADPQJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPR*JBODY THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF A BODY,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPRJAC2.0*;ADPRJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPT*JFIRST RECESS DIAMETER
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPTJAB2.0*;ADPTJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPV*JBODY SPHERICAL RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPVJAA2.0*;ADPVJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPW*JOUTSIDE CORNER RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPWJAB2.0*;ADPWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPX*JBODY OUTSIDE RADIUS
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPXJAA2.0*;ADPXJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPY*JPILOT HEIGHT
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADPYJAA2.0*;ADPYJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CWCJ*JINSIDE ANGLE
NONE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCJJRB2.0*;CWCJJRB2.0$$JRB2.1*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADPS*BINSIDE ANGLE IN DEG
NONE.
Enter a reply with a minimum of one digit on either side of the decimal point.
(ADPSB2.0)
HEAT*DHEAT TREATMENT
A COMBINATION OF TIMED HEATING AND COOLING OPERATIONS APPLIED FOR THE PURPOSE OF ANNEALING OR HARDENING THE ITEM.
Enter the applicable reply code from the table below
(HEATDCH*;HEATDCX$DRL*;HEATDCX$$DRL*)
| Table 1 |
| Reply Code (AD05) | Reply |
| BP | ANNEALED |
| CR | COLD DRAWN |
| CX | COLD ROLLED |
| CU | EXTRUDED |
| EX | H-111 STRAIN HARDENED |
| GB | H-116 SPECIALLY TREATED |
| TP | H-24 STRAIN HARDENED, PARTIALLY ANNEALED TO 1/2 HARD |
| TQ | H-32 STRAIN HARDENED, STABILIZED TO 1/4 HARD |
| QP | H-321 STRAIN HARDENED |
| LL | H-323 STRAIN HARDENED AND STABILIZED |
| TR | H-34 STRAIN HARDENED, STABILIZED TO 1/2 HARD |
| TS | H-36 STRAIN HARDENED, STABILIZED TO 3/4 HARD |
| TT | H-38 STRAIN HARDENED, STABILIZED TO FULL HARD |
| CH | HARD |
| CY | HARDENED |
| CT | HOT ROLLED |
| JR | OILED |
| JQ | PICKLED |
| EN | QUENCHED |
| JT | ROLLED |
| DZ | T-52 COOLED STRESS RELIEVED AND ARTIFICALLY AGED |
| TW | T-6 SOLUTION HEAT TREATED, ARTIFICALLY AGED |
| RX | T-651 SOLUTION HEAT TREATED, ARTIFICALLY AGED, AND STRESS RELIEVED BY STRETCHING |
| RK | T-6510 SOLUTION HEAT TREATED |
| RL | T-6511 SOLUTION HEAT TREATED |
| EP | TEMPERED |
IF STYLE/REPLY CODE(s) 1 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (AAUB)
IF STYLE/REPLY CODE(s) 3 OR 5 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (ABGC and ABGD)
IF STYLE/REPLY CODE(s) 4, 6 OR 7 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (ABGC)
IF STYLE/REPLY CODE(s) 8 WERE ENTERED FOR MRC ADQK, YOU MUST ANSWER MRC (AAUB and ABGD and ABGC)
ADQK*LMOUNTING OPENING SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE SHAPE OF THE MOUNTING OPENING.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADQKL7*;ADQKL4$L2*;ADQKL4$$L2*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AV10157 | 1 | UNTHREADED HOLE |
| AV10158 | 2 | THREADED HOLE |
| AV10159 | 3 | CLOSED HORIZONTAL SLOT |
| AV10160 | 4 | OPEN HORIZONTAL SLOT |
| AV10161 | 5 | CLOSED VERTICAL SLOT |
| AV10162 | 6 | OPEN VERTICAL SLOT |
| AV10163 | 7 | OPEN VERTICAL CURVED SLOT |
| AV10164 | 8 | SLOTTED HOLE (KEY HOLE) |
AAUB*JHOLE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAUBJAC2.0*;AAUBJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGC*JSLOT WIDTH
THE DISTANCE,MEASURED ALONG A STRAIGHT LINE PERPENDICULAR TO THE LONGITUDINAL AXIS OF THE SLOT,FROM ONE EDGE TO THE OTHER.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGCJAB2.0*;ABGCJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABGD*JSLOT LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE SLOT,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABGDJAC2.0*;ABGDJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AKYN*GFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter clear text.
(AKYNGCLEARTEXT)
ABKW*JOVERALL HEIGHT
THE DISTANCE MEASURED IN A STRAIGHT LINE FROM THE BOTTOM TO THE TOP OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKWJLA2.0*;ABKWJLA2.0$$JLA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDGGL*;CBBLDGGM$$DAPZ*)
| Table 1 |
| Reply Code (AN47) | Reply |
| GGL | ALUMINUM COVER |
| BRN | HANDLE FOR OPENING, LIFTING, CLOSING, OR THE LIKE |
| GGM | INSULATION |
| DKY | MOUNTING HOLE |
| APZ | OBSERVATION FACILITY |
| BRQ | SEALING CAPABILITY |
| BRP | SPECIAL MARKING |
NHCF*DNUCLEAR HARDNESS CRITICAL FEATURE
AN INDICATION OF THE NUCLEAR HARDNESS CRITICALITY OF THE ITEM.
Enter the applicable reply code from the table below
(NHCFDCY)
| Table 1 |
| Reply Code (AD05) | Reply |
| CY | HARDENED |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
CYHX*AVEHICLE DESIGN CONTROL ACTIVITY
THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE GOVERNMENT AGENCY,INDUSTRIAL ORGANIZATION,OR OTHER ENTITY,WHICH CONTROLS THE DESIGN OF THE VEHICLE.
Enter the alpha-numeric reply with five character(s) exactly.
(CYHXAU6Q3H)
ALCD*GUSAGE DESIGN
INDICATES THE DESIGNED USE OF THE ITEM.
Enter clear text.
(ALCDGCLEARTEXT)
CQBC*JMINIMUM TENSILE STRENGTH
THE MAXIMUM RATED LOAD IN TENSION APPLIED IN A LONGITUDINAL DIRECTION,PER UNIT OF CROSS-SECTIONAL AREA,THAT THE MATERIAL CAN WITHSTAND WITHOUT RUPTURE.
Enter the applicable Reply Code from Table 1 below followed by a alpha-numeric reply with a minimum of one character.
(CQBCJG2.0*;CQBCJG2.0$JG2.0*;CQBCJG2.0$$JG2.1*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| S | MEGAPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
| G | POUNDS PER SQUARE INCH GAGE |
CQHQ*JMINIMUM YIELD STRENGTH
THE STRESS AT WHICH A MATERIAL EXHIBITS A SPECIFIED LIMITING DEVIATION FROM THE PROPORTIONALITY OF STRESS OR STRAIN.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(CQHQJK2*;CQHQJK2$$JK3*;CQHQJK2$JK2*)
| Table 1 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| A | KILOGRAMS PER SQUARE INCH |
| S | MEGAPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
| F | POUNDS PER SQUARE INCH DIFFERENTIAL |
| G | POUNDS PER SQUARE INCH GAGE |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
Enter the word CAGE immediately followed by a colon, followed by a space then the 5 position Commercial and Government Entity (CAGE) Code, followed by a space and the letters PN immediately followed by a colon, a space and the part/model/reference number.
AVMF*AADDITIVE MANUFACTURING CAGE AND PART/MODEL NUMBER
THE ADDITIVE MANUFACTURER'S FIVE-DIGIT CAGE DESIGNATION AND THE PART/MODEL NUMBER.
CAGE: XXXXX PN: XXXXXXXXX
CAGE: XXXXX PN: XXXXXXXXX AND CAGE: XXXXX PN: XXXXXXXXX
(AVMFACAGE: 30003 PN: 4866113-485-AM*;AVMFACAGE: 30003 PN: 4866113-485-AM$$CAGE: 30003 PN: 5977224-120-AM)
TEXT*GGENERAL CHARACTERISTICS ITEM DESCRIPTION
A RECORDING OF THE PHYSICAL,FUNCTIONAL,AND PERFORMANCE CHARACTERISTICS FOR AN ITEM OF SUPPLY.
Enter clear text.
(TEXTGCLEARTEXT)
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
ASDB*JWIDTH ACROSS FLATS
THE SHORTEST STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ASDBJAB2.0*;ASDBJAB2.0$JAB2.0*;ASDBJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information