A fluid line fitting shaped to form the letter "Y" with a quick disconnect feature on the branch ends and having a pipe, tube, hose or quick disconnect feature on the base or inlet end.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AYK added to MRC MATT.
ISAC Reply 3BAE added to MRC MATT.
ISAC Reply 3BDP added to MRC MATT.
ISAC Reply 3DQB added to MRC MATT.
ISAC Reply 3DQD added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AA deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AG deleted from MRC MATT.
ISAC Reply 2AK deleted from MRC MATT.
ISAC Reply 2AL deleted from MRC MATT.
ISAC Reply 2AM deleted from MRC MATT.
ISAC Reply 2AN deleted from MRC MATT.
ISAC Reply 2AP deleted from MRC MATT.
ISAC Reply 2AQ deleted from MRC MATT.
ISAC Reply 2AR deleted from MRC MATT.
ISAC Reply 2AT deleted from MRC MATT.
ISAC Reply 2AV deleted from MRC MATT.
ISAC Reply 2AW deleted from MRC MATT.
ISAC Reply 2AX deleted from MRC MATT.
ISAC Reply 2AY deleted from MRC MATT.
ISAC Reply 2AZ deleted from MRC MATT.
ISAC Reply 2BA deleted from MRC MATT.
ISAC Reply 2BB deleted from MRC MATT.
ISAC Reply 2BC deleted from MRC MATT.
ISAC Reply 2BD deleted from MRC MATT.
ISAC Reply 2BE deleted from MRC MATT.
ISAC Reply 2BF deleted from MRC MATT.
ISAC Reply 2BG deleted from MRC MATT.
ISAC Reply 2BH deleted from MRC MATT.
ISAC Reply 2BJ deleted from MRC MATT.
ISAC Reply 2BK deleted from MRC MATT.
ISAC Reply 2BL deleted from MRC MATT.
ISAC Reply 2BM deleted from MRC MATT.
ISAC Reply 2BN deleted from MRC MATT.
ISAC Reply 2XX deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AYK added to MRC MDCL.
ISAC Reply 3BAE added to MRC MDCL.
ISAC Reply 3BDP added to MRC MDCL.
ISAC Reply 3DQB added to MRC MDCL.
ISAC Reply 3DQD added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AA deleted from MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AG deleted from MRC MDCL.
ISAC Reply 2AK deleted from MRC MDCL.
ISAC Reply 2AL deleted from MRC MDCL.
ISAC Reply 2AM deleted from MRC MDCL.
ISAC Reply 2AN deleted from MRC MDCL.
ISAC Reply 2AP deleted from MRC MDCL.
ISAC Reply 2AQ deleted from MRC MDCL.
ISAC Reply 2AR deleted from MRC MDCL.
ISAC Reply 2AT deleted from MRC MDCL.
ISAC Reply 2AV deleted from MRC MDCL.
ISAC Reply 2AW deleted from MRC MDCL.
ISAC Reply 2AX deleted from MRC MDCL.
ISAC Reply 2AY deleted from MRC MDCL.
ISAC Reply 2AZ deleted from MRC MDCL.
ISAC Reply 2BA deleted from MRC MDCL.
ISAC Reply 2BB deleted from MRC MDCL.
ISAC Reply 2BC deleted from MRC MDCL.
ISAC Reply 2BD deleted from MRC MDCL.
ISAC Reply 2BE deleted from MRC MDCL.
ISAC Reply 2BF deleted from MRC MDCL.
ISAC Reply 2BG deleted from MRC MDCL.
ISAC Reply 2BH deleted from MRC MDCL.
ISAC Reply 2BJ deleted from MRC MDCL.
ISAC Reply 2BK deleted from MRC MDCL.
ISAC Reply 2BL deleted from MRC MDCL.
ISAC Reply 2BM deleted from MRC MDCL.
ISAC Reply 2BN deleted from MRC MDCL.
ISAC Reply 2XX deleted from MRC MDCL.
ISAC Reply 3AAT added to MRC SFTT.
ISAC Reply 3AEE added to MRC SFTT.
ISAC Reply 3HOU added to MRC SFTT.
ISAC Reply 2AA deleted from MRC SFTT.
ISAC Reply 2AB deleted from MRC SFTT.
ISAC Reply 2AC deleted from MRC SFTT.
ISAC Reply 2AD deleted from MRC SFTT.
ISAC Reply 2AE deleted from MRC SFTT.
ISAC Reply 2AF deleted from MRC SFTT.
ISAC Reply 2AG deleted from MRC SFTT.
ISAC Reply 2AK deleted from MRC SFTT.
ISAC Reply 2AL deleted from MRC SFTT.
ISAC Reply 2AM deleted from MRC SFTT.
ISAC Reply 2AN deleted from MRC SFTT.
ISAC Reply 2AP deleted from MRC SFTT.
ISAC Reply 2AQ deleted from MRC SFTT.
ISAC Reply 2AR deleted from MRC SFTT.
ISAC Reply 2AT deleted from MRC SFTT.
ISAC Reply 2AV deleted from MRC SFTT.
ISAC Reply 2AW deleted from MRC SFTT.
ISAC Reply 2AX deleted from MRC SFTT.
ISAC Reply 2AY deleted from MRC SFTT.
ISAC Reply 2AZ deleted from MRC SFTT.
ISAC Reply 2BA deleted from MRC SFTT.
ISAC Reply 2BB deleted from MRC SFTT.
ISAC Reply 2BC deleted from MRC SFTT.
ISAC Reply 2BD deleted from MRC SFTT.
ISAC Reply 2BE deleted from MRC SFTT.
ISAC Reply 2BF deleted from MRC SFTT.
ISAC Reply 2BG deleted from MRC SFTT.
ISAC Reply 2BH deleted from MRC SFTT.
ISAC Reply 2BJ deleted from MRC SFTT.
ISAC Reply 2BK deleted from MRC SFTT.
ISAC Reply 2BL deleted from MRC SFTT.
ISAC Reply 2BM deleted from MRC SFTT.
ISAC Reply 2BN deleted from MRC SFTT.
ISAC Reply 2XX deleted from MRC SFTT.
ISAC Reply 3AAT added to MRC STDC.
ISAC Reply 3AEE added to MRC STDC.
ISAC Reply 3HOU added to MRC STDC.
ISAC Reply 2AA deleted from MRC STDC.
ISAC Reply 2AB deleted from MRC STDC.
ISAC Reply 2AC deleted from MRC STDC.
ISAC Reply 2AD deleted from MRC STDC.
ISAC Reply 2AE deleted from MRC STDC.
ISAC Reply 2AF deleted from MRC STDC.
ISAC Reply 2AG deleted from MRC STDC.
ISAC Reply 2AK deleted from MRC STDC.
ISAC Reply 2AL deleted from MRC STDC.
ISAC Reply 2AM deleted from MRC STDC.
ISAC Reply 2AN deleted from MRC STDC.
ISAC Reply 2AP deleted from MRC STDC.
ISAC Reply 2AQ deleted from MRC STDC.
ISAC Reply 2AR deleted from MRC STDC.
ISAC Reply 2AT deleted from MRC STDC.
ISAC Reply 2AV deleted from MRC STDC.
ISAC Reply 2AW deleted from MRC STDC.
ISAC Reply 2AX deleted from MRC STDC.
ISAC Reply 2AY deleted from MRC STDC.
ISAC Reply 2AZ deleted from MRC STDC.
ISAC Reply 2BA deleted from MRC STDC.
ISAC Reply 2BB deleted from MRC STDC.
ISAC Reply 2BC deleted from MRC STDC.
ISAC Reply 2BD deleted from MRC STDC.
ISAC Reply 2BE deleted from MRC STDC.
ISAC Reply 2BF deleted from MRC STDC.
ISAC Reply 2BG deleted from MRC STDC.
ISAC Reply 2BH deleted from MRC STDC.
ISAC Reply 2BJ deleted from MRC STDC.
ISAC Reply 2BK deleted from MRC STDC.
ISAC Reply 2BL deleted from MRC STDC.
ISAC Reply 2BM deleted from MRC STDC.
ISAC Reply 2BN deleted from MRC STDC.
ISAC Reply 2XX deleted from MRC STDC.
ISAC Reply 3AEE added to MRC MEDA.
ISAC Reply 3DQX added to MRC MEDA.
ISAC Reply 3DQY added to MRC MEDA.
ISAC Reply 3DQZ added to MRC MEDA.
ISAC Reply 3DRA added to MRC MEDA.
ISAC Reply 3DRB added to MRC MEDA.
ISAC Reply 3HOU added to MRC MEDA.
ISAC Reply 1A deleted from MRC MEDA.
ISAC Reply 1B deleted from MRC MEDA.
ISAC Reply 1C deleted from MRC MEDA.
ISAC Reply 1D deleted from MRC MEDA.
ISAC Reply 1E deleted from MRC MEDA.
ISAC Reply 3AEE added to MRC CQGM.
ISAC Reply 3DQX added to MRC CQGM.
ISAC Reply 3HOU added to MRC CQGM.
ISAC Reply 1A deleted from MRC CQGM.
ISAC Reply 1B deleted from MRC CQGM.
ISAC Reply 1C deleted from MRC CQGM.
ISAC Reply 1D deleted from MRC CQGM.
ISAC Reply 1E deleted from MRC CQGM.
ISAC Reply 3AEE added to MRC AEHZ.
ISAC Reply 3DQX added to MRC AEHZ.
ISAC Reply 3DQY added to MRC AEHZ.
ISAC Reply 3DQZ added to MRC AEHZ.
ISAC Reply 3HOU added to MRC AEHZ.
ISAC Reply 1A deleted from MRC AEHZ.
ISAC Reply 1B deleted from MRC AEHZ.
ISAC Reply 1C deleted from MRC AEHZ.
ISAC Reply 1D deleted from MRC AEHZ.
ISAC Reply 1E deleted from MRC AEHZ.
ISAC Reply 3AEE added to MRC AHSJ.
ISAC Reply 3AEU added to MRC AHSJ.
ISAC Reply 3AIB added to MRC AHSJ.
ISAC Reply 3AWD added to MRC AHSJ.
ISAC Reply 3AWE added to MRC AHSJ.
ISAC Reply 3HOU added to MRC AHSJ.
ISAC Reply 1B deleted from MRC AHSJ.
ISAC Reply 1C deleted from MRC AHSJ.
ISAC Reply 1J deleted from MRC AHSJ.
ISAC Reply 1K deleted from MRC AHSJ.
ISAC Reply 3AEE added to MRC AWLS.
ISAC Reply 3AET added to MRC AWLS.
ISAC Reply 3AEU added to MRC AWLS.
ISAC Reply 3AEX added to MRC AWLS.
ISAC Reply 3AIB added to MRC AWLS.
ISAC Reply 3AVY added to MRC AWLS.
ISAC Reply 3AVZ added to MRC AWLS.
ISAC Reply 3AWA added to MRC AWLS.
ISAC Reply 3AWD added to MRC AWLS.
ISAC Reply 3AWE added to MRC AWLS.
ISAC Reply 3HOU added to MRC AWLS.
ISAC Reply 1D deleted from MRC AWLS.
ISAC Reply 1E deleted from MRC AWLS.
ISAC Reply 1F deleted from MRC AWLS.
ISAC Reply 1G deleted from MRC AWLS.
ISAC Reply 1H deleted from MRC AWLS.
ISAC Reply 1J deleted from MRC AWLS.
ISAC Reply 1K deleted from MRC AWLS.
ISAC Reply 1X deleted from MRC AWLS.
ISAC Reply 3AEE added to MRC AHNC.
ISAC Reply 3AET added to MRC AHNC.
ISAC Reply 3AEU added to MRC AHNC.
ISAC Reply 3AEX added to MRC AHNC.
ISAC Reply 3AIB added to MRC AHNC.
ISAC Reply 3AVY added to MRC AHNC.
ISAC Reply 3AVZ added to MRC AHNC.
ISAC Reply 3AWA added to MRC AHNC.
ISAC Reply 3AWC added to MRC AHNC.
ISAC Reply 3AWD added to MRC AHNC.
ISAC Reply 3AWE added to MRC AHNC.
ISAC Reply 3HOU added to MRC AHNC.
ISAC Reply 1D deleted from MRC AHNC.
ISAC Reply 1E deleted from MRC AHNC.
ISAC Reply 1F deleted from MRC AHNC.
ISAC Reply 1G deleted from MRC AHNC.
ISAC Reply 1H deleted from MRC AHNC.
ISAC Reply 1J deleted from MRC AHNC.
ISAC Reply 1K deleted from MRC AHNC.
ISAC Reply 1X deleted from MRC AHNC.
ISAC Reply 3AEE added to MRC AGTA.
ISAC Reply 3AEX added to MRC AGTA.
ISAC Reply 3AVY added to MRC AGTA.
ISAC Reply 3AWD added to MRC AGTA.
ISAC Reply 3HOU added to MRC AGTA.
ISAC Reply 1D deleted from MRC AGTA.
ISAC Reply 1E deleted from MRC AGTA.
ISAC Reply 1F deleted from MRC AGTA.
ISAC Reply 1G deleted from MRC AGTA.
ISAC Reply 1H deleted from MRC AGTA.
ISAC Reply 1J deleted from MRC AGTA.
ISAC Reply 1K deleted from MRC AGTA.
ISAC Reply 1X deleted from MRC AGTA.
ISAC Reply 3AEE added to MRC ADLN.
ISAC Reply 3AET added to MRC ADLN.
ISAC Reply 3AEU added to MRC ADLN.
ISAC Reply 3AEX added to MRC ADLN.
ISAC Reply 3AVY added to MRC ADLN.
ISAC Reply 3AVZ added to MRC ADLN.
ISAC Reply 3AWA added to MRC ADLN.
ISAC Reply 3AWD added to MRC ADLN.
ISAC Reply 3AWE added to MRC ADLN.
ISAC Reply 3HOU added to MRC ADLN.
ISAC Reply 1D deleted from MRC ADLN.
ISAC Reply 1E deleted from MRC ADLN.
ISAC Reply 1F deleted from MRC ADLN.
ISAC Reply 1G deleted from MRC ADLN.
ISAC Reply 1H deleted from MRC ADLN.
ISAC Reply 1J deleted from MRC ADLN.
ISAC Reply 1K deleted from MRC ADLN.
ISAC Reply 1X deleted from MRC ADLN.
ISAC Reply 3AEE added to MRC ADLP.
ISAC Reply 3AET added to MRC ADLP.
ISAC Reply 3AEU added to MRC ADLP.
ISAC Reply 3AEX added to MRC ADLP.
ISAC Reply 3AIB added to MRC ADLP.
ISAC Reply 3AVY added to MRC ADLP.
ISAC Reply 3AVZ added to MRC ADLP.
ISAC Reply 3AWA added to MRC ADLP.
ISAC Reply 3AWD added to MRC ADLP.
ISAC Reply 3AWE added to MRC ADLP.
ISAC Reply 3HOU added to MRC ADLP.
ISAC Reply 1D deleted from MRC ADLP.
ISAC Reply 1E deleted from MRC ADLP.
ISAC Reply 1F deleted from MRC ADLP.
ISAC Reply 1G deleted from MRC ADLP.
ISAC Reply 1H deleted from MRC ADLP.
ISAC Reply 1J deleted from MRC ADLP.
ISAC Reply 1K deleted from MRC ADLP.
ISAC Reply 1X deleted from MRC ADLP.
ISAC Reply 3AEE added to MRC AAAR.
ISAC Reply 3AEX added to MRC AAAR.
ISAC Reply 3AVZ added to MRC AAAR.
ISAC Reply 3AWA added to MRC AAAR.
ISAC Reply 3HOU added to MRC AAAR.
ISAC Reply 1D deleted from MRC AAAR.
ISAC Reply 1E deleted from MRC AAAR.
ISAC Reply 1F deleted from MRC AAAR.
ISAC Reply 1G deleted from MRC AAAR.
ISAC Reply 1H deleted from MRC AAAR.
ISAC Reply 1J deleted from MRC AAAR.
ISAC Reply 1K deleted from MRC AAAR.
ISAC Reply 1X deleted from MRC AAAR.
ISAC Reply 3AEE added to MRC CWDW.
ISAC Reply 3AEX added to MRC CWDW.
ISAC Reply 3AVY added to MRC CWDW.
ISAC Reply 3AWD added to MRC CWDW.
ISAC Reply 3AWE added to MRC CWDW.
ISAC Reply 3HOU added to MRC CWDW.
ISAC Reply 1D deleted from MRC CWDW.
ISAC Reply 1E deleted from MRC CWDW.
ISAC Reply 1F deleted from MRC CWDW.
ISAC Reply 1G deleted from MRC CWDW.
ISAC Reply 1H deleted from MRC CWDW.
ISAC Reply 1J deleted from MRC CWDW.
ISAC Reply 1K deleted from MRC CWDW.
ISAC Reply 1X deleted from MRC CWDW.
ISAC Reply 3AEE added to MRC CWFD.
ISAC Reply 3AET added to MRC CWFD.
ISAC Reply 3AEU added to MRC CWFD.
ISAC Reply 3AEX added to MRC CWFD.
ISAC Reply 3AVY added to MRC CWFD.
ISAC Reply 3AVZ added to MRC CWFD.
ISAC Reply 3AWA added to MRC CWFD.
ISAC Reply 3HOU added to MRC CWFD.
ISAC Reply 1D deleted from MRC CWFD.
ISAC Reply 1E deleted from MRC CWFD.
ISAC Reply 1F deleted from MRC CWFD.
ISAC Reply 1G deleted from MRC CWFD.
ISAC Reply 1H deleted from MRC CWFD.
ISAC Reply 1J deleted from MRC CWFD.
ISAC Reply 1K deleted from MRC CWFD.
ISAC Reply 1X deleted from MRC CWFD.
ISAC Reply 3AEE added to MRC THSD.
ISAC Reply 3AEX added to MRC THSD.
ISAC Reply 3AVZ added to MRC THSD.
ISAC Reply 3AWA added to MRC THSD.
ISAC Reply 3HOU added to MRC THSD.
ISAC Reply 1D deleted from MRC THSD.
ISAC Reply 1E deleted from MRC THSD.
ISAC Reply 1F deleted from MRC THSD.
ISAC Reply 1G deleted from MRC THSD.
ISAC Reply 1H deleted from MRC THSD.
ISAC Reply 1J deleted from MRC THSD.
ISAC Reply 1K deleted from MRC THSD.
ISAC Reply 1X deleted from MRC THSD.
ISAC Reply 3AEE added to MRC CQJX.
ISAC Reply 3AEX added to MRC CQJX.
ISAC Reply 3AVZ added to MRC CQJX.
ISAC Reply 3AWA added to MRC CQJX.
ISAC Reply 3HOU added to MRC CQJX.
ISAC Reply 1D deleted from MRC CQJX.
ISAC Reply 1E deleted from MRC CQJX.
ISAC Reply 1F deleted from MRC CQJX.
ISAC Reply 1G deleted from MRC CQJX.
ISAC Reply 1H deleted from MRC CQJX.
ISAC Reply 1J deleted from MRC CQJX.
ISAC Reply 1K deleted from MRC CQJX.
ISAC Reply 1X deleted from MRC CQJX.
MRC CWTM has been deleted
MRC CQRB has been deleted
MRC CWBZ has been deleted
MRC CMLP has been deleted
MRC AAJD has been deleted
MRC CQQR has been deleted
MRC CTTC has been deleted
MRC AAJE has been deleted
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED29764*)
MATTDMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3AYKDRCB000*;MATT3AYKDRCB000$DPBA000*;MATT3AYKDRCB000$$DPBA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3AYK | GASKET |
| 3BAE | SOCKET |
| 3BDP | PLUG |
| 3DQB | TAILPIECE |
| 3DQD | UNION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALA000 | ALUMINUM |
| ALB000 | ALUMINUM ALLOY |
| BEB000 | BERYLLIUM COPPER (USE CUB000) |
| CRA000 | CHROMIUM |
| CRB000 | CHROMIUM ALLOY |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| GSB000 | GLASS FIBER |
| FEA000 | IRON |
| FEF000 | IRON ALLOY |
| PBA000 | LEAD |
| LRA000 | LEATHER |
| MGA000 | MAGNESIUM |
| MGB000 | MAGNESIUM ALLOY |
| MNA000 | MANGANESE |
| MBA000 | MOLYBDENUM |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCCB00 | PLASTIC NYLON |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| RCE000 | RUBBER |
| RCB000 | RUBBER SYNTHETIC |
| STA000 | STEEL |
| STB000 | STEEL CORROSION RESISTING |
| STC000 | STEEL STAINLESS - USE STB000 |
| TTB000 | TITANIUM |
| TTA000 | TITANIUM ALLOY |
| ZNB000 | ZINC |
| ZNA000 | ZINC ALLOY |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3AYK | GASKET |
| 3BAE | SOCKET |
| 3BDP | PLUG |
| 3DQB | TAILPIECE |
| 3DQD | UNION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
SFTT*DSURFACE TREATMENT
THE METALLIC,NONMETALLIC,AND/OR CHEMICAL PROPERTIES WITH WHICH THE ITEM IS PLATED,DIPPED,AND/OR COATED.THE TREATMENT IS DESIGNED TO PROTECT THE SURFACE(S) AND CANNOT BE WIPED OFF.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(SFTT3AEEDPNA000*;SFTT3AEEDPNA000$DPSA000*;SFTT3AEEDPNA000$$DPSA000*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (SF01) | Reply |
| ANA000 | ANODIZE |
| CDA000 | CADMIUM |
| CLB000 | CERAMIC |
| CMA000 | CHROMATE |
| CMB000 | CHROMATE ZINC |
| CRA000 | CHROMIUM |
| CUA000 | COPPER |
| CUB000 | COPPER ALLOY |
| DCA000 | DICHROMATE |
| ENA000 | ENAMEL |
| NLA000 | NICKEL |
| XXB000 | OXIDE |
| XXA000 | OXIDE FILM |
| PNA000 | PAINT |
| PSA000 | PASSIVATE |
| PHA000 | PHOSPHATE |
| PRA000 | PRIMER |
| SNA000 | TIN |
| VAA000 | VARNISH |
| ZNA000 | ZINC |
STDC*JSURFACE TREATMENT DOCUMENT AND CLASSIFICATION
THE SPECIFICATION,STANDARD,OR MANUFACTURERS REFERENCE,AND THE CLASSIFICATION DESIGNATION,SUCH AS TYPE,CLASS,GRADE,AND THE LIKE,THAT IDENTIFIES THE SURFACE TREATMENT MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(STDCJEGTEXT1234*;STDCJEGTEXT1234$$JEGTEXT1234*;STDCJEGTEXT1234$JEGTEXT1234*; STDC1BJEGTEXT1234*;STDC1BJEGTEXT1234$$JEGTEXT1234*;STDC1BJEGTEXT1234$JEGTEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3AEE | OVERALL |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP39) | Reply |
| M | 10TH TREATMENT RESPONSE |
| N | 11TH TREATMENT RESPONSE |
| P | 12TH TREATMENT RESPONSE |
| Q | 13TH TREATMENT RESPONSE |
| R | 14TH TREATMENT RESPONSE |
| S | 15TH TREATMENT RESPONSE |
| B | 1ST TREATMENT RESPONSE |
| C | 2ND TREATMENT RESPONSE |
| D | 3RD TREATMENT RESPONSE |
| E | 4TH TREATMENT RESPONSE |
| F | 5TH TREATMENT RESPONSE |
| H | 6TH TREATMENT RESPONSE |
| J | 7TH TREATMENT RESPONSE |
| K | 8TH TREATMENT RESPONSE |
| L | 9TH TREATMENT RESPONSE |
| G | ALL TREATMENT RESPONSES |
| A | SINGLE TREATMENT RESPONSE |
MEDA*DMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MEDA3DQYDAAT*;MEDA3DQYDAAT$DABT*;MEDA3DQYDAAT$$DABT*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3DRB | FOURTH RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN91) | Reply |
| AEJ | ACETYLENE GAS |
| AAE | AIR |
| ABW | ALCOHOL |
| ABX | AMMONIA |
| ACW | CHEMICAL |
| ADS | ETHYLENE GLYCOL/WATER MIXTURE |
| AAY | FUEL/OIL, HYDROCARBON |
| AAQ | GAS |
| ACZ | GASOLINE |
| AAR | GREASE |
| ACC | HELIUM |
| AGT | HYDRAULIC FLUID, MINERAL BASE |
| ACD | HYDRAULIC FLUID, PETROLEUM BASE |
| AAW | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| AAX | HYDRAULIC FLUID, SILICATE-ESTER BASE |
| AAT | HYDRAULIC FLUID, WATER BASE |
| ACG | HYDRAZINE/UNSYMMETRIC DIMETHYL HYDRAZINE |
| ABE | NITROGEN, GASEOUS |
| ABG | NITROGEN, TETRAOXIDE |
| ACJ | OIL |
| ABJ | OXYGEN, GASEOUS |
| ABK | OXYGEN, LIQUID |
| AFD | REFRIGERANT |
| ABM | REFRIGERANT 12 |
| ABP | STEAM |
| ABR | WATER |
| ADM | WATER, DEMINERALIZED |
| ABT | WATER, SALT |
| AEK | WATER/ALCOHOL MIXTURE |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGM3DQXJN2.0*;CQGM3DQXJN2.0$JN2.0*;CQGM3DQXJN2.0$$JN2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| B | BAR |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
AEHZ*JMAXIMUM OPERATING TEMP
THE MAXIMUM TEMPERATURE AT WHICH THE ITEM IS RATED TO OPERATE FOR AN EXTENDED PERIOD OF TIME.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AEHZ3DQYJF2.0*;AEHZ3DQYJF2.0$JF2.0*;AEHZ3DQYJF2.0$$JF2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CRFY*JFLOW ANGLE
THE ANGLE THAT THE FLOW IS TURNED FROM THE STRAIGHT FLOW.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRFYJR2.0*)
| Table 1 |
| Reply Code (AP38) | Reply |
| D | DEGREES |
| R | RADIANS |
IF STYLE/REPLY CODE(s) A4 WERE ENTERED FOR MRC STYL, YOU MUST ANSWER MRC (AHSJ)
STYLLSTYLE DESIGNATOR
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(STYLLA4)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1370 | A4 | WYE |
AHSJ*JLEG LENGTH
A MEASUREMENT OF THE LONGEST DIMENSION OF THE LEG,IN DISTINCTION FROM WIDTH.
Enter the applicable ISAC from Table 1 below followed by the mode code, the applicable Reply Code from Tables 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AHSJ3AWDJAB2.0*;AHSJ3AWDJAB2.0$JAB2.0*;AHSJ3AWDJAB2.0$$JAB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEU | SECOND END |
| 3AIB | THIRD END |
| 3AWD | FIRST QUICK DISCONNECT END |
| 3AWE | SECOND QUICK DISCONNECT END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 3 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
CQKS*DMOUNTING FLANGE LOCATION
INDICATES THE LOCATION OF THE MOUNTING FLANGE ON THE ITEM.
Enter the applicable reply code from the table below
(CQKSDMBY)
| Table 1 |
| Reply Code (AN73) | Reply |
| AEN | ALL ENDS |
| FEN | FIRST END |
| FSL | FIRST LEG |
| HEN | FOURTH END |
| MBY | MAIN BODY |
| SEN | SECOND END |
| SLG | SECOND LEG |
| TEN | THIRD END |
Reference NotesRefer to Reference Drawing for leg selection.
Refer to Reference Drawings for assitance in answering this MRC.
IF STYLE/REPLY CODE(s) AF, AJ OR BD WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AAAR)
IF STYLE/REPLY CODE(s) WR OR WS WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (THSD)
IF STYLE/REPLY CODE(s) AQ OR AS WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (CWDW)
IF STYLE/REPLY CODE(s) AB, AD OR BE WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (CWFD)
IF STYLE/REPLY CODE(s) AA WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (CWFD and THSD)
IF STYLE/REPLY CODE(s) AE OR AG WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (AAAR and THSD)
IF STYLE/REPLY CODE(s) AP OR AR WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (THSD and CWDW)
IF STYLE/REPLY CODE(s) AV OR AW WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (THSD)
IF STYLE/REPLY CODE(s) AY, AZ, BA, RF OR RG WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (ADLN and ADLP and ADLT)
IF STYLE/REPLY CODE(s) GQ WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (ADLT)
IF STYLE/REPLY CODE(s) RM WERE ENTERED FOR MRC AWLS, YOU MUST ANSWER MRC (THSD and CWDW)
AWLSDCONNECTION TYPE
INDICATES THE TYPE OF CONNECTION/S/.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(AWLS3AVZDBC*;AWLS3AVZDBC$DAP*;AWLS3AVZDBC$$DAP*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3AVY | FIRST FLUID END CONNECTION |
| 3AVZ | SECOND FLUID END CONNECTION |
| 3AWA | THIRD FLUID END CONNECTION |
| 3AWD | FIRST QUICK DISCONNECT END |
| 3AWE | SECOND QUICK DISCONNECT END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB76) | Reply |
| RG | AIR CHUCK QUICK DISCONNECT |
| BD | BUTT WELD PIPE |
| BE | BUTT WELD TUBE |
| AZ | EXTERNAL QUICK DISCONNECT |
| BF | FLANGE |
| BA | GLAD HAND QUICK DISCONNECT |
| GQ | GROOVED COUPLING |
| AY | INTERNAL QUICK DISCONNECT |
| AW | THREADED EXTERNAL BOSS |
| WR | THREADED EXTERNAL GAS FITTING |
| AR | THREADED EXTERNAL HOSE |
| RM | THREADED EXTERNAL HOSE GRIPPING |
| AG | THREADED EXTERNAL PIPE |
| AC | THREADED EXTERNAL TUBE |
| AV | THREADED INTERNAL BOSS |
| WS | THREADED INTERNAL GAS FITTING |
| AP | THREADED INTERNAL HOSE |
| AE | THREADED INTERNAL PIPE |
| AA | THREADED INTERNAL TUBE |
| RF | UNIVERSAL QUICK DISCONNECT |
| AS | UNTHREADED EXTERNAL HOSE |
| AJ | UNTHREADED EXTERNAL PIPE |
| AD | UNTHREADED EXTERNAL TUBE |
| AQ | UNTHREADED INTERNAL HOSE |
| AF | UNTHREADED INTERNAL PIPE |
| AB | UNTHREADED INTERNAL TUBE |
| BC | UNTHREADED UNIVERSAL FITTING BOLT END |
IF YOU ANSWER MRC AHNC, YOU MUST ANSWER MRC (AGTA)
IF STYLE/REPLY CODE(s) G4 OR G5 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CWDH and CWDL)
IF STYLE/REPLY CODE(s) G7 OR G8 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CWDS and CWDP)
IF STYLE/REPLY CODE(s) J1 OR J2 WERE ENTERED FOR MRC AHNC, YOU MUST ANSWER MRC (CWCQ and CWCK)
AHNCLCONNECTION STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE CONNECTION.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AHNC3AWALB7*;AHNC3AWALB7$LB4*;AHNC3AWALB7$$LB4*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3AVY | FIRST FLUID END CONNECTION |
| 3AVZ | SECOND FLUID END CONNECTION |
| 3AWA | THIRD FLUID END CONNECTION |
| 3AWC | MOUNTING FLANGE |
| 3AWD | FIRST QUICK DISCONNECT END |
| 3AWE | SECOND QUICK DISCONNECT END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1374 | B1 | SWIVEL NUT, FLARED |
| AAN1383 | B11 | DOUBLE COMPRESSION |
| AAN1384 | B12 | INVERTED FLARE |
| AAN1385 | B13 | BOSS GASKET SEAL |
| AAN1386 | B14 | PLAIN |
| AAN1387 | B15 | SWIVEL NUT, FLARE |
| AAN1388 | B16 | SWIVEL NUT, GASKET SEAL |
| AAN1389 | B18 | FLARE |
| AAN1375 | B2 | SWIVEL NUT WITH COMPRESSION SLEEVE |
| AAN1390 | B20 | SWIVEL NUT, GASKET SEAL |
| AAN1376 | B3 | SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE |
| AAN1377 | B4 | GASKET SEAL |
| AAN1378 | B5 | SWIVEL NUT, GASKET SEAL |
| AAN1379 | B6 | SWIVEL NUT, GAS |
| AAN1380 | B7 | SWIVEL NUT, FLARELESS CAP |
| AAN1381 | B8 | SWIVEL NUT, FLARELESS CAP |
| AAN1382 | B9 | SWIVEL NUT, FLARELESS |
| AAN1391 | C1 | SOCKET |
| AAN1395 | C10 | GASKET SEAL |
| AAN1396 | C11 | SOCKET W/ BRAZING RING |
| AAN1392 | C2 | STREAMLINED WITH ONE BRAZING RING |
| AAN1393 | C6 | REDUCED GASKET SEAL |
| AAN1394 | C7 | PLAIN |
| AAN1398 | D1 | INVERTED FLARE |
| AAN1406 | D10 | SWIVEL PLAIN |
| AAN1407 | D14 | DOUBLE THREADED SECTION BOSS FITTING GASKET W/ LOCKNUT SEALING |
| AAN1408 | D19 | FLARED |
| AAN1399 | D2 | PLAIN |
| AAN1409 | D20 | FLARED W/ GASKET SEAL (BOSS) |
| AAN1400 | D3 | COMPRESSION |
| AAN1401 | D4 | HOSE GRIPPING NIPPLE |
| AAN1402 | D5 | HOSE OR PLASTIC TUBING GRIPPING |
| AAN1403 | D6 | FLARED |
| AAN1404 | D7 | EXTERNAL SEAT FOR GASKET SEAL |
| AAN1405 | D8 | FLARELESS |
| AAN1410 | E1 | BEADED |
| AAN1411 | E2 | BARBED OR SERRATED END |
| AAN1412 | E3 | KNURLED |
| AAN1413 | E4 | SPIRALED |
| AAN1414 | E5 | GROOVED |
| AAN1415 | E6 | BEADED |
| AAB1244 | E7 | PLAIN |
| AAN1417 | E8 | PLAIN BEVELED |
| AAN1418 | G1 | PLAIN |
| AAN1419 | G4 | RAISED |
| AAN1420 | G5 | SWIVEL FLANGE, RAISED |
| AAN1421 | G7 | RECESSED |
| AAN1422 | G8 | RECESSED |
| DR00010 | J1 | BRAKE LINE FITTING |
| DR00011 | J2 | FLUID CONNECTION |
CXGP*JNOMINAL HOLE DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CXGPJA2.0*;CXGPJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDS*JRECESS NOMINAL DEPTH
A NOMINAL MEASUREMENT BETWEEN SPECIFIED POINTS ON THE RECESS,IN DISTINCTION FROM HEIGHT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDSJA2.0*;CWDSJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDL*JRAISED FACE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A RAISED FACE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDLJA2.0*;CWDLJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDP*JRECESS NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE RECESS,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDPJA2.0*;CWDPJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDH*JRAISED FACE NOMINAL HEIGHT
A NOMINAL MEASUREMENT FROM THE BOTTOM TO THE TOP SURFACE OF A RAISED FACE,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDHJA2.0*;CWDHJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCQ*JBOLT HOLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BOLT HOLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCQJA2.0*;CWCQJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCK*JNOMINAL THICKNESS
A NOMINAL MEASUREMENT OF THE SMALLEST DIMENSION OF AN ITEM,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCKJA2.0*;CWCKJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF STYLE/REPLY CODE(s) 1 OR 2 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AECS and CWCT and CWCQ and CWCN and CWCK)
IF STYLE/REPLY CODE(s) 3 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AECS and CWCT and CWCQ and CWCD and CWCK)
IF STYLE/REPLY CODE(s) 1A OR 2A WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (CWCN and CWCK)
IF STYLE/REPLY CODE(s) 3A WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (CWCD and CWCK)
IF STYLE/REPLY CODE(s) 4 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AECS and CWCY and CWDC and AKGF and CWCQ and AKGG and CWCK)
IF STYLE/REPLY CODE(s) 4A OR 5A WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AKGF and AKGG and CWCK)
IF STYLE/REPLY CODE(s) 5 OR 6 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AECS and CWCQ and CWCT and AKGF and AKGG and CWCK)
IF STYLE/REPLY CODE(s) 6A WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AKGF and AKGG and CWCK)
IF STYLE/REPLY CODE(s) 11 WERE ENTERED FOR MRC AGTA, YOU MUST ANSWER MRC (AECS and CWCQ and AKGF and CWDC and CWCY and AKGG and CWCK)
AGTA*LBASIC SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE BASIC APPEARANCE OF THE ITEM.
Enter the applicable ISAC from the table below folowed by the mode code and the applicable reply code from the drawing group below.
(AGTA3AVYL4*;AGTA3AVYL4$L6A*;AGTA3AVYL4$$L6A*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3AVY | FIRST FLUID END CONNECTION |
| 3AWD | FIRST QUICK DISCONNECT END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1423 | 1 | HEXAGON |
| DR00024 | 11 | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) |
| AAN1429 | 1A | HEXAGON W/OUT BOLT HOLES |
| AAN1424 | 2 | OCTAGON |
| AAN1430 | 2A | OCTAGON W/OUT BOLT HOLES |
| AAN1425 | 3 | ROUND |
| AAN1431 | 3A | ROUND W/OUT BOLT HOLES |
| AAN1426 | 4 | RECTANGULAR |
| AAN1432 | 4A | RECTANGULAR W/ OUT BOLT HOLES |
| AAN1427 | 5 | TRIANGULAR |
| AAN1433 | 5A | TRIANGULAR W/OUT BOLT HOLES |
| AAN1428 | 6 | OVAL |
| AAN1434 | 6A | OVAL W/OUT BOLT HOLES |
CWCT*JBOLT CIRCLE NOMINAL DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE BOLT CIRCLE,AND TERMINATES AT THE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCTJA2.0*;CWCTJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCD*JNOMINAL OUTSIDE DIAMETER
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF AN ITEM,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCDJA2.0*;CWCDJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCY*JCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
THE CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG THE LENGTH OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCYJA2.0*;CWCYJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDC*JCENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH
THE CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG THE WIDTH OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDCJA2.0*;CWDCJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AKGG*JNOMINAL LENGTH
A NOMINAL MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGGJA2.0*;AKGGJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWCN*JNOMINAL WIDTH ACROSS FLATS
THE SHORTEST NOMINAL STRAIGHT LINE BETWEEN FLATS,PERPENDICULAR TO THE HEIGHT OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWCNJA2.0*;CWCNJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AKGF*JNOMINAL WIDTH
A NOMINAL MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AKGFJA2.0*;AKGFJA2.0$$JA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AECS*ABOLT HOLE QUANTITY
THE NUMBER OF BOLT HOLES PROVIDED ON THE ITEM.
Enter the numeric reply with a minimum of one digit.
(AECSA10*)
ADLNDQUICK DISCONNECT METHOD
THE MEANS BY WHICH MECHANICAL ACTION COMPLETELY ENGAGES OR DISENGAGES A MATING QUICK DISCONNECT PART.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(ADLN3AETDF*;ADLN3AETDF$DG*;ADLN3AETDF$$DG*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AVY | FIRST FLUID END CONNECTION |
| 3AVZ | SECOND FLUID END CONNECTION |
| 3AWA | THIRD FLUID END CONNECTION |
| 3AWD | FIRST QUICK DISCONNECT END |
| 3AWE | SECOND QUICK DISCONNECT END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AC44) | Reply |
| M | CAM-LOCKING |
| K | GLADHAND |
| C | PUSH-LOCK |
| D | PUSH-PULL |
| L | QUICK LEAD THREAD |
| E | SPRING PUSH-LOCK |
| F | SPRING PUSH-PULL |
| G | TWIST-LOCK |
| H | TWO LUG UNIVERSAL |
Reference Notes Refer to Reference Drawings for pictorial reference
Refer to Reference Drawings for assitance in answering this MRC.
ADLP*JQUICK DISCONNECT NOMINAL SIZE
THE INDUSTRIAL DESIGNATION OR TERM FOR THE SIZE OF THE QUICK DISCONNECT INTERNAL OR EXTERNAL END.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADLP3AVZJA2.0*;ADLP3AVZJA2.0$JA2.0*;ADLP3AVZJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AIB | THIRD END |
| 3AVY | FIRST FLUID END CONNECTION |
| 3AVZ | SECOND FLUID END CONNECTION |
| 3AWA | THIRD FLUID END CONNECTION |
| 3AWD | FIRST QUICK DISCONNECT END |
| 3AWE | SECOND QUICK DISCONNECT END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
AAAR*JNOMINAL PIPE SIZE ACCOMMODATED
A MEASUREMENT OF THE PIPE SIZE THE ITEM WILL ACCOMMODATE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAAR3AVZJA2.0*;AAAR3AVZJA2.0$JA2.0*;AAAR3AVZJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3AVZ | SECOND FLUID END CONNECTION |
| 3AWA | THIRD FLUID END CONNECTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWDW*JNOMINAL INSIDE DIAMETER HOSE ACCOMMODATED
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATED HOSE,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWDW3AWEJA2.0*;CWDW3AWEJA2.0$JA2.0*;CWDW3AWEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3AVY | FIRST FLUID END CONNECTION |
| 3AWD | FIRST QUICK DISCONNECT END |
| 3AWE | SECOND QUICK DISCONNECT END |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CWFD*JNOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED
THE NOMINAL LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF THE ACCOMMODATED TUBE,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CWFD3AEEJA2.0*;CWFD3AEEJA2.0$JA2.0*;CWFD3AEEJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AET | FIRST END |
| 3AEU | SECOND END |
| 3AEX | ALL ENDS |
| 3AVY | FIRST FLUID END CONNECTION |
| 3AVZ | SECOND FLUID END CONNECTION |
| 3AWA | THIRD FLUID END CONNECTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
IF YOU ANSWER MRC THSD, YOU MUST ANSWER MRC (CQJX)
THSD*DTHREAD SERIES DESIGNATOR
A DESIGNATION DISTINGUISHING ONE GROUP OF THREAD DIAMETER-PITCH COMBINATIONS FROM ANOTHER BY THE NUMBER OF THREADS PER MEASUREMENT SCALE FOR A SPECIFIC DIAMETER.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(THSD3AWADSP*;THSD3AWADSP$DJC*;THSD3AWADSP$$DJC*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3AVZ | SECOND FLUID END CONNECTION |
| 3AWA | THIRD FLUID END CONNECTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AH06) | Reply |
| AM | ACME |
| AC | ACME C |
| AG | ACME G |
| AN | ANPT |
| BF | BRITISH STANDARD FINE (BSF) |
| BW | BRITISH STANDARD WHITWORTH (BSW) |
| ZP | BSP. L |
| DQ | BSP.C |
| FB | BSP.F |
| PL | BSP.PL |
| BS | BSP.TR EXT |
| BR | BSP.TR INT |
| TT | BUTTRESS |
| FP | F-PTF |
| SM | ISO M |
| ME | ISO METRIC FINE |
| SS | ISO S |
| EM | M |
| MJ | MJ |
| NG | NGO |
| GS | NGS |
| GT | NGT |
| NH | NH |
| NZ | NH-SPCL |
| SP | NPS |
| SC | NPSC |
| SF | NPSF |
| SH | NPSH |
| PS | NPSI |
| SL | NPSL |
| PM | NPSM |
| NP | NPT |
| NT | NPTF |
| PT | PTF-SAE SHORT |
| PP | PTF-SPL |
| PE | PTF-SPL EXTRA SHORT |
| PF | PTF-SPL SHORT |
| RH | RAN HOSE |
| RD | ROUND |
| SA | STUB ACME |
| MT | SUBMARINE THD |
| UN | UN |
| NE | UNEF |
| NF | UNF |
| NC | UNIFIED NATIONAL COARSE (UNC) |
| NJ | UNIFIED NATIONAL JOINT (UNJ) |
| JF | UNIFIED NATIONAL JOINT FINE (UNJF) |
| JC | UNJC |
| JE | UNJEF |
| JS | UNJS |
| NS | UNS |
| WW | WHITWORTH |
CQJX*JNOMINAL THREAD SIZE
A DESIGNATION THAT IS USED FOR THE PURPOSE OF GENERAL IDENTIFICATION OF THE THREAD.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQJX3AVZJA2.0*;CQJX3AVZJA2.0$JA2.0*;CQJX3AVZJA2.0$$JA2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3AEX | ALL ENDS |
| 3AVZ | SECOND FLUID END CONNECTION |
| 3AWA | THIRD FLUID END CONNECTION |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
ADLT*GMATING END IDENTIFICATION
THE SPECIFIC MATING COUPLING HALF WITH WHICH THE ITEM MUST CONNECT.
Enter clear text.
(ADLTGCLEARTEXT)
TMQY*JFURNISHED ITEMS AND QUANTITY
THE NAME AND NUMBER OF THOSE PARTS FURNISHED WITH THE ITEM OF SUPPLY THAT HAVE NOT BEEN SPECIFIED ELSEWHERE.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit.
(TMQYJAFH2*;TMQYJAFH2$$JAFH3*)
| Table 1 |
| Reply Code (AB28) | Reply |
| AMK | ACTUATING RING |
| ACH | ADAPTER |
| ABR | BOLT |
| AML | CABLE |
| AEL | CAP |
| AMM | CHAIN |
| AMN | CLAMP |
| AKG | COVER |
| AMP | DUST PLUG ASSEMBLY |
| ACN | GASKET |
| ADM | GROMMET |
| AMQ | HOSE CLAMP FERRULE |
| ADP | HOSE COUPLING NUT |
| AMR | LOCK SPRING |
| ADW | LOCKNUT |
| ADX | LONG COUPLING NUT |
| AMS | NAME TAG |
| AKN | NIPPLE |
| ABW | NUT |
| ABY | PIN |
| AEA | PLUG |
| ADZ | PREFORMED PACKING |
| AMT | PRESSURE CAP |
| AMW | RETAINING CLIP |
| AMX | SCREW |
| AFH | SEAL |
| AEC | SHORT COUPLING NUT |
| ACX | SLEEVE |
| AMY | SPRING |
| AMZ | UNION NUT |
| AJW | WASHER |
| ANA | WIRE ROPE |
ADJS*DEXTERIOR COLOR
THE HUE OR TINT OF THE EXTERIOR OF THE ITEM.
Enter the applicable reply code from the table below
(ADJSDWH0000*;ADJSDBL0000$DBR0000*;ADJSDBL0000$$DBR0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| GR0000 | GREEN |
| RG0000 | ORANGE |
| PU0000 | PURPLE |
| RE0000 | RED |
| WH0000 | WHITE |
| YE0000 | YELLOW |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDABT*;CBBLDAAV$$DABS*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AAV | BOLTED FLANGE HOUSING TYPE |
| BQP | LOCKWIRE HOLE |
| BMA | MANUAL SHUT-OFF VALVE |
| ABS | REUSABLE END FITTINGS |
| AMM | SAFETY LOCKING FEATURE |
| ABT | SELF-SEALING |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
BBRG*DSTORAGE TYPE
INDICATES THE TYPE OF STORAGE SPACE REQUIRED FOR AN ITEM IN ORDER TO PROVIDE THE DEGREE OF PROTECTION NECESSARY TO MAINTAIN SERVICEABILITY STANDARDS.
Enter the applicable reply code from the table below
(BBRGDAR*;BBRGDAZ$DAY*)
| Table 1 |
| Reply Code (AM81) | Reply |
| AQ | CONTROLLED HUMIDITY UNHEATED WAREHOUSE |
| AD | CONTROLLED HUMIDITY WAREHOUSE |
| AM | DEHUMIDIFIED WAREHOUSE |
| AT | DOCK LEVEL HEATED WAREHOUSE |
| AX | DOCK LEVEL UNHEATED WAREHOUSE |
| AY | GENERAL PURPOSE HEATED WAREHOUSE |
| AZ | GENERAL PURPOSE UNHEATED WAREHOUSE |
| AS | GROUND LEVEL HEATED WAREHOUSE |
| AW | GROUND LEVEL UNHEATED WAREHOUSE |
| AN | HEATED WAREHOUSE |
| AR | SHED |
AFJQ*JSTORAGE TEMP RANGE
THE MINIMUM AND MAXIMUM TEMPERATURES AT WHICH AN ITEM CAN BE STORED WITHOUT DETRIMENTAL EFFECT.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit. Precede negative values (below zero degrees) with the letter M, and positive values (zero and above) with the letter P.
(AFJQJCM32.0/P50.0*)
| Table 1 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
AJAG*JUNPACKAGED UNIT WIDTH
A MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAGJAA2.0*;AJAGJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
AJAH*JUNPACKAGED UNIT HEIGHT
A MEASUREMENT FROM THE BOTTOM TO THE TOP OF AN ITEM UNENCUMBERED BY PACKAGING OR PACKING,IN DISTINCTION FROM DEPTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AJAHJAC2.0*;AJAHJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)