A flexible, tubular item having a nonmetallic tube inner conveying surface and one or more reinforcement layers of a metallic or nonmetallic material. It is designed to convey gasses, liquids, or solids. For items with fittings on one or both ends, see HOSE ASSEMBLY, NONMETALLIC. Excludes:HOSE, AIR DUCT; and HOSE AIR DUCT, AIR BREATHING.
ISAC Reply 3AEE added to MRC MEDA.
ISAC Reply 3DQX added to MRC MEDA.
ISAC Reply 3DQY added to MRC MEDA.
ISAC Reply 3DQZ added to MRC MEDA.
ISAC Reply 3DRA added to MRC MEDA.
ISAC Reply 3DRB added to MRC MEDA.
ISAC Reply 3DRC added to MRC MEDA.
ISAC Reply 3HOU added to MRC MEDA.
ISAC Reply 1A deleted from MRC MEDA.
ISAC Reply 1B deleted from MRC MEDA.
ISAC Reply 1C deleted from MRC MEDA.
ISAC Reply 1D deleted from MRC MEDA.
ISAC Reply 1E deleted from MRC MEDA.
ISAC Reply 1F deleted from MRC MEDA.
ISAC Reply 3AEE added to MRC ABJH.
ISAC Reply 3DQX added to MRC ABJH.
ISAC Reply 3DQY added to MRC ABJH.
ISAC Reply 3DQZ added to MRC ABJH.
ISAC Reply 3DRA added to MRC ABJH.
ISAC Reply 3DRB added to MRC ABJH.
ISAC Reply 3DRC added to MRC ABJH.
ISAC Reply 3HOU added to MRC ABJH.
ISAC Reply 1A deleted from MRC ABJH.
ISAC Reply 1B deleted from MRC ABJH.
ISAC Reply 1C deleted from MRC ABJH.
ISAC Reply 1D deleted from MRC ABJH.
ISAC Reply 1E deleted from MRC ABJH.
ISAC Reply 1F deleted from MRC ABJH.
ISAC Reply 3AEE added to MRC CQGM.
ISAC Reply 3DQX added to MRC CQGM.
ISAC Reply 3DQY added to MRC CQGM.
ISAC Reply 3DQZ added to MRC CQGM.
ISAC Reply 3DRA added to MRC CQGM.
ISAC Reply 3HOU added to MRC CQGM.
ISAC Reply 1A deleted from MRC CQGM.
ISAC Reply 1B deleted from MRC CQGM.
ISAC Reply 1C deleted from MRC CQGM.
ISAC Reply 1D deleted from MRC CQGM.
ISAC Reply 1E deleted from MRC CQGM.
ISAC Reply 1F deleted from MRC CQGM.
ISAC Reply 3AEE added to MRC CRDW.
ISAC Reply 3DQX added to MRC CRDW.
ISAC Reply 3DQY added to MRC CRDW.
ISAC Reply 3HOU added to MRC CRDW.
ISAC Reply 1A deleted from MRC CRDW.
ISAC Reply 1B deleted from MRC CRDW.
ISAC Reply 1C deleted from MRC CRDW.
ISAC Reply 1D deleted from MRC CRDW.
ISAC Reply 1E deleted from MRC CRDW.
ISAC Reply 1F deleted from MRC CRDW.
ISAC Reply 3AEE added to MRC CQBD.
ISAC Reply 3DQX added to MRC CQBD.
ISAC Reply 3DQY added to MRC CQBD.
ISAC Reply 3DQZ added to MRC CQBD.
ISAC Reply 3HOU added to MRC CQBD.
ISAC Reply 1A deleted from MRC CQBD.
ISAC Reply 1B deleted from MRC CQBD.
ISAC Reply 1C deleted from MRC CQBD.
ISAC Reply 1D deleted from MRC CQBD.
ISAC Reply 1E deleted from MRC CQBD.
ISAC Reply 1F deleted from MRC CQBD.
Reply SLK000 added to MRC MATT.
ISAC Reply 3AAT added to MRC MATT.
ISAC Reply 3ACU added to MRC MATT.
ISAC Reply 3ADP added to MRC MATT.
ISAC Reply 3ADW added to MRC MATT.
ISAC Reply 3AEE added to MRC MATT.
ISAC Reply 3AUC added to MRC MATT.
ISAC Reply 3AUW added to MRC MATT.
ISAC Reply 3AVU added to MRC MATT.
ISAC Reply 3BBI added to MRC MATT.
ISAC Reply 3BBL added to MRC MATT.
ISAC Reply 3CFJ added to MRC MATT.
ISAC Reply 3CUT added to MRC MATT.
ISAC Reply 3DPT added to MRC MATT.
ISAC Reply 3DPU added to MRC MATT.
ISAC Reply 3DPV added to MRC MATT.
ISAC Reply 3DPW added to MRC MATT.
ISAC Reply 3DQB added to MRC MATT.
ISAC Reply 3DQD added to MRC MATT.
ISAC Reply 3DQE added to MRC MATT.
ISAC Reply 3DQF added to MRC MATT.
ISAC Reply 3DQJ added to MRC MATT.
ISAC Reply 3DQK added to MRC MATT.
ISAC Reply 3DQL added to MRC MATT.
ISAC Reply 3DQM added to MRC MATT.
ISAC Reply 3HOU added to MRC MATT.
ISAC Reply 2AA deleted from MRC MATT.
ISAC Reply 2AB deleted from MRC MATT.
ISAC Reply 2AC deleted from MRC MATT.
ISAC Reply 2AD deleted from MRC MATT.
ISAC Reply 2AE deleted from MRC MATT.
ISAC Reply 2AF deleted from MRC MATT.
ISAC Reply 2AG deleted from MRC MATT.
ISAC Reply 2AH deleted from MRC MATT.
ISAC Reply 2AJ deleted from MRC MATT.
ISAC Reply 2AK deleted from MRC MATT.
ISAC Reply 2AL deleted from MRC MATT.
ISAC Reply 2AM deleted from MRC MATT.
ISAC Reply 2AN deleted from MRC MATT.
ISAC Reply 2AP deleted from MRC MATT.
ISAC Reply 2AQ deleted from MRC MATT.
ISAC Reply 2AR deleted from MRC MATT.
ISAC Reply 2AT deleted from MRC MATT.
ISAC Reply 2AV deleted from MRC MATT.
ISAC Reply 2AW deleted from MRC MATT.
ISAC Reply 2AX deleted from MRC MATT.
ISAC Reply 2AY deleted from MRC MATT.
ISAC Reply 2AZ deleted from MRC MATT.
ISAC Reply 2BA deleted from MRC MATT.
ISAC Reply 2BB deleted from MRC MATT.
ISAC Reply 2BC deleted from MRC MATT.
ISAC Reply 2BD deleted from MRC MATT.
ISAC Reply 2BE deleted from MRC MATT.
ISAC Reply 2BF deleted from MRC MATT.
ISAC Reply 2BG deleted from MRC MATT.
ISAC Reply 2BH deleted from MRC MATT.
ISAC Reply 2BJ deleted from MRC MATT.
ISAC Reply 2BK deleted from MRC MATT.
ISAC Reply 2BL deleted from MRC MATT.
ISAC Reply 2BM deleted from MRC MATT.
ISAC Reply 2BN deleted from MRC MATT.
ISAC Reply 2XX deleted from MRC MATT.
ISAC Reply 3AAT added to MRC MDCL.
ISAC Reply 3ACU added to MRC MDCL.
ISAC Reply 3ADP added to MRC MDCL.
ISAC Reply 3ADW added to MRC MDCL.
ISAC Reply 3AEE added to MRC MDCL.
ISAC Reply 3AUC added to MRC MDCL.
ISAC Reply 3AUW added to MRC MDCL.
ISAC Reply 3AVU added to MRC MDCL.
ISAC Reply 3BBI added to MRC MDCL.
ISAC Reply 3BBL added to MRC MDCL.
ISAC Reply 3CFJ added to MRC MDCL.
ISAC Reply 3CUT added to MRC MDCL.
ISAC Reply 3DPT added to MRC MDCL.
ISAC Reply 3DPU added to MRC MDCL.
ISAC Reply 3DPV added to MRC MDCL.
ISAC Reply 3DPW added to MRC MDCL.
ISAC Reply 3DQB added to MRC MDCL.
ISAC Reply 3DQD added to MRC MDCL.
ISAC Reply 3DQE added to MRC MDCL.
ISAC Reply 3DQF added to MRC MDCL.
ISAC Reply 3DQJ added to MRC MDCL.
ISAC Reply 3DQK added to MRC MDCL.
ISAC Reply 3DQL added to MRC MDCL.
ISAC Reply 3DQM added to MRC MDCL.
ISAC Reply 3HOU added to MRC MDCL.
ISAC Reply 2AA deleted from MRC MDCL.
ISAC Reply 2AB deleted from MRC MDCL.
ISAC Reply 2AC deleted from MRC MDCL.
ISAC Reply 2AD deleted from MRC MDCL.
ISAC Reply 2AE deleted from MRC MDCL.
ISAC Reply 2AF deleted from MRC MDCL.
ISAC Reply 2AG deleted from MRC MDCL.
ISAC Reply 2AH deleted from MRC MDCL.
ISAC Reply 2AJ deleted from MRC MDCL.
ISAC Reply 2AK deleted from MRC MDCL.
ISAC Reply 2AL deleted from MRC MDCL.
ISAC Reply 2AM deleted from MRC MDCL.
ISAC Reply 2AN deleted from MRC MDCL.
ISAC Reply 2AP deleted from MRC MDCL.
ISAC Reply 2AQ deleted from MRC MDCL.
ISAC Reply 2AR deleted from MRC MDCL.
ISAC Reply 2AT deleted from MRC MDCL.
ISAC Reply 2AV deleted from MRC MDCL.
ISAC Reply 2AW deleted from MRC MDCL.
ISAC Reply 2AX deleted from MRC MDCL.
ISAC Reply 2AY deleted from MRC MDCL.
ISAC Reply 2AZ deleted from MRC MDCL.
ISAC Reply 2BA deleted from MRC MDCL.
ISAC Reply 2BB deleted from MRC MDCL.
ISAC Reply 2BC deleted from MRC MDCL.
ISAC Reply 2BD deleted from MRC MDCL.
ISAC Reply 2BE deleted from MRC MDCL.
ISAC Reply 2BF deleted from MRC MDCL.
ISAC Reply 2BG deleted from MRC MDCL.
ISAC Reply 2BH deleted from MRC MDCL.
ISAC Reply 2BJ deleted from MRC MDCL.
ISAC Reply 2BK deleted from MRC MDCL.
ISAC Reply 2BL deleted from MRC MDCL.
ISAC Reply 2BM deleted from MRC MDCL.
ISAC Reply 2BN deleted from MRC MDCL.
ISAC Reply 2XX deleted from MRC MDCL.
NAMEDITEM NAME
NOUN, WITH OR WITHOUT MODIFIERS, BY WHICH AN ITEM OF SUPPLY IS KNOWN.
Enter the item name code.
(NAMED22670*)
IF STYLE/REPLY CODE(s) B1 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AARX)
IF STYLE/REPLY CODE(s) B2 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJV and ADJU and ADJW)
IF STYLE/REPLY CODE(s) B3 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJV)
IF STYLE/REPLY CODE(s) B4 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (ADJV and ADJU and ADJW)
IF STYLE/REPLY CODE(s) B7 WERE ENTERED FOR MRC AAGR, YOU MUST ANSWER MRC (AAGT)
AAGRLCROSS-SECTIONAL SHAPE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE CROSS-SECTIONAL SHAPE OF THE ITEM.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(AAGRLB4)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1013 | B1 | ROUND |
| AAN1014 | B2 | OVAL |
| AAN1015 | B3 | SQUARE |
| AAN1016 | B4 | RECTANGULAR |
| AAN1017 | B7 | FLAT |
CRXXJMEASURING METHOD AND LENGTH
THE MEANS USED AND THE MEASUREMENT OF THE LONGEST DIMENSION OF AN ITEM.
Enter the applicable Reply Code from Tables 1 & 2 & 3 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRXXJMBRN2.0*;CRXXJMBRN2.0$JMBRN2.0*;CRXXJMBRN2.0$$JMBRN2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| F | FEET |
| A | INCHES |
| M | METERS |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
| Table 3 |
| Reply Code (AN68) | Reply |
| EX | EXCLUDING END FITTINGS |
| XW | EXTENDED WORKING |
| RL | OVERALL |
| RN | RANDOM |
| WK | WORKING |
MEDADMEDIA FOR WHICH DESIGNED
THE TYPE OF MEDIA FOR WHICH THE ITEM IS DESIGNED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MEDA3DRADABR*;MEDA3DRADABR$DAAE*;MEDA3DRADABR$$DAAE*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3DRB | FOURTH RESPONSE |
| 3DRC | FIFTH RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN91) | Reply |
| AAB | ACETYLENE |
| AAC | ACID |
| AAD | AGRICULTURAL SPRAY SOLUTION |
| AAE | AIR |
| AAF | ALCOHOL, ETHYL |
| AAG | ALCOHOL, METHYL |
| AAH | AMMONIA, GASEOUS |
| AAJ | AMMONIA, LIQUID |
| AHF | ANTIFREEZE |
| AFN | ASPHALT |
| ABH | BRAKE FLUID, NONMINERAL OIL |
| AAK | BROMOCHLOROMETHANE |
| AAL | BUTANE |
| AAM | CARBON DIOXIDE |
| ACW | CHEMICAL |
| AEM | DETERGENT |
| AHQ | DOPE |
| AEN | EFFLUENT, DOMESTIC |
| AAN | ETHYLENE GLYCOL |
| ADS | ETHYLENE GLYCOL/WATER MIXTURE |
| ADG | FLUID |
| AFB | FLUIDS |
| ACR | FUEL |
| ACX | FUEL, DIESEL |
| AAY | FUEL/OIL, HYDROCARBON |
| AAP | FUMIGANT |
| AAQ | GAS |
| AEP | GAS, EXHAUST |
| ABA | GAS, INERT |
| ABD | GAS, NATURAL |
| AAR | GREASE |
| AAS | HYDRAULIC FLUID |
| ACD | HYDRAULIC FLUID, PETROLEUM BASE |
| AAW | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE |
| AAX | HYDRAULIC FLUID, SILICATE-ESTER BASE |
| AAT | HYDRAULIC FLUID, WATER BASE |
| AAZ | HYDROGEN |
| ADF | LIQUID |
| ADW | LIQUID, BLEACHING |
| ABB | LIQUID, INGESTED |
| AJW | METHANOL |
| ABE | NITROGEN, GASEOUS |
| ABF | NITROGEN, LIQUID |
| ACJ | OIL |
| ABC | OIL, LUBRICATING, DIESTER BASE |
| ABJ | OXYGEN, GASEOUS |
| ABK | OXYGEN, LIQUID |
| ABL | PAINT |
| ACK | PROPANE |
| ABM | REFRIGERANT 12 |
| ABN | REFRIGERANT 13 |
| ACM | REFRIGERANT 22 |
| AEX | SAND |
| AEH | SOLVENT |
| ABP | STEAM |
| ABQ | TRICHLOROETHYLENE |
| ADK | VACUUM |
| AHK | VAPORIZING LIQUID |
| ABR | WATER |
| AHC | WATER, DRINKING |
| ABS | WATER, FRESH |
| ABT | WATER, SALT |
AARXJINSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE INSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AARXJAC2.0*;AARXJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJL*LINNER CONVEYING TUBE STYLE
THE STYLE DESIGNATION INDICATING THE CONFIGURATION THAT MOST NEARLY CORRESPONDS TO THE APPEARANCE OF THE INNER CONVEYING TUBE.
Review the representative drawings below, find the drawing which best represents your item.Use the Physical Drawing ID (eg: AAT1001) to identify the row(s) in the table which are applicable to your drawing.Enter the applicable reply code from the table below.
(ADJLLA8*;ADJLLA5$LA3*)
| Table 1 |
| Physical Drawing ID | Reply Code (STYL) | Reply |
| AAN1001 | A1 | INTERLOCKED UNPACKED |
| AAN1009 | A10 | ANNULAR CLOSE-PITCH CORRUGATED |
| AAN1010 | A11 | HELICAL OPEN-PITCH CORRUGATED |
| AAN1011 | A12 | HELICAL CLOSE-PITCH CORRUGATED |
| AAN1012 | A13 | WELDED CORRUGATED |
| DR00043 | A14 | PLAIN |
| AAN1002 | A2 | INTERLOCKED PACKED |
| AAN1003 | A3 | OVERLAPPED SQUARE LOCKED UNPACKED |
| AAN1004 | A4 | OVERLAPPED SQUARE LOCKED PACKED |
| AAN1005 | A5 | OVERLAPPED DOUBLE-GROOVE UNPACKED |
| AAN1006 | A6 | OVERLAPPED DOUBLE-GROOVE PACKED |
| AAN1007 | A8 | OVERLAPPED HIGH RIDGE PACKED |
| AAN1008 | A9 | ANNULAR OPEN-PITCH CORRUGATED |
ZZZW*GDEPARTURE FROM CITED DOCUMENT
THE TECHNICAL DIFFERENTIATING CHARACTERISTIC(S) OF AN ITEM OF SUPPLY THAT DEPART(S) FROM THE TEXT OF A SPECIFICATION OR A STANDARD IN THAT IT REPRESENTS A SELECTION OF CHARACTERISTICS STATED IN THE SPECIFICATION OR STANDARD AS BEING OPTIONAL OR A VARIATION FROM ONE OR MORE OF THE STATED CHARACTERISTICS OR AN ADDITIONAL CHARACTERISTIC NOT STATED IN THE SPECIFICATION OR STANDARD.
Enter the reply in clear text.
(ZZZWGAS MODIFIED BY MATERIAL*)
ABJH*JTEMP RATING
A VALUE WHICH EXPRESSES THE DEGREE OF HEAT OR COLD AS APPLIED TO THE OPERATION,OR LIMITATION OF OPERATION,OF AN ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit as in the first and second examples.For negative temperature values, precede the numeric portion of the reply with the letter “M” as in the third and fourth examples.If ISAC coding is authorized for this requirement and one or more of the temperature values in negative, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.Also precede the numeric portion of the reply with the letter “M” as in the fifth and sixth examples.
(ABJHJF68.0*; ABJHJC0.0$$JC35.0*; ABJHJFCM15.0*; ABJHJFM40.0$$JF75.0*; ABJH1BJFM25.0*; ABJH1BJCM35.0$$JCM5.0*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3DRB | FOURTH RESPONSE |
| 3DRC | FIFTH RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AB36) | Reply |
| C | CELSIUS |
| F | FAHRENHEIT |
CQGM*JMAXIMUM OPERATING PRESSURE
THE MAXIMUM PRESSURE AT WHICH THE ITEM IS RATED FOR OPERATION.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQGM3DRAJP2.0*;CQGM3DRAJP2.0$JP2.0*;CQGM3DRAJP2.0$$JP2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3DRA | THIRD RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| B | BAR |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CRDW*JHYDROSTATIC TEST PRESSURE
A STEADY,UNIFORM,INTERNAL,STATIC PRESSURE THAT THE ITEM MUST WITHSTAND WITHOUT LEAKAGE,ABNORMAL DISTORTION,OR DAMAGE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CRDW3DQXJK2.0*;CRDW3DQXJK2.0$JK2.0*;CRDW3DQXJK2.0$$JK2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CQBD*JBURST TEST PRESSURE
THE MINIMUM INTERNAL PRESSURE RATING,DETERMINED BY DESTRUCTION TESTS,AT WHICH THE ITEM CAN BE EXPECTED TO RUPTURE.
Enter the applicable ISAC from Table 1 below followed by the mode code, applicable Reply Code from Table 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(CQBD3DQZJB2.0*;CQBD3DQZJB2.0$JB2.0*;CQBD3DQZJB2.0$$JB2.1*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AEE | OVERALL |
| 3DQX | SINGLE RESPONSE |
| 3DQY | FIRST RESPONSE |
| 3DQZ | SECOND RESPONSE |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AN71) | Reply |
| B | BAR |
| K | KILOGRAMS PER SQUARE CENTIMETER |
| L | KILOPASCALS |
| N | NEWTONS PER SQUARE CENTIMETER |
| P | POUNDS PER SQUARE INCH |
CRSM*BVACUUM IN TORR
THE ULTIMATE MAXIMUM VACUUM,EXPRESSED IN TERMS OF ABSOLUTE PRESSURE,THAT MAY BE PRODUCED BY OR APPLIED TO AN ITEM.
Enter a reply with a minimum of one digit on either side of the decimal point.
(CRSMB2.0)
ADJS*DEXTERIOR COLOR
THE HUE OR TINT OF THE EXTERIOR OF THE ITEM.
Enter the applicable reply code from the table below
(ADJSDRG0000*;ADJSDAM0000$DBL0000*)
| Table 1 |
| Reply Code (AD06) | Reply |
| AM0000 | AMBER |
| AM0004 | AMBER, TRANSLUCENT |
| BL0000 | BLACK |
| BU0000 | BLUE |
| BR0000 | BROWN |
| CL0000 | CLEAR |
| CR0000 | CREAM |
| GY0002 | GRAY, LIGHT |
| GY0000 | GRAY/GREY |
| GR0000 | GREEN |
| GR0011 | GREEN, OLIVE |
| MA0000 | MAROON |
| NA0000 | NATURAL |
| LD0000 | OLIVE DRAB |
| RG0000 | ORANGE |
| RE0000 | RED |
| SL0000 | SILVER |
| TA0000 | TAN |
| WH0000 | WHITE |
| WH0012 | WHITE, TRANSLUCENT |
| YE0000 | YELLOW |
CRJM*DOUTER COVERING ENVIRONMENTAL PROTECTION
THE TYPE OF PROTECTION PROVIDED BY THE OUTER COVERING.
Enter the applicable reply code from the table below
(CRJMDAAP*;CRJMDADS$$DAAX*)
| Table 1 |
| Reply Code (AA65) | Reply |
| ABX | ABRASION RESISTANT |
| ABY | ACID RESISTANT |
| AEQ | AGE RESISTANT |
| ABZ | ALCOHOL RESISTANT |
| ACK | ALKALI RESISTANT |
| AAB | CHEMICAL RESISTANT |
| ACB | COLD RESISTANT |
| AAC | CORROSION RESISTANT |
| ADM | CRUSH RESISTANT |
| AAF | DUST RESISTANT |
| AHZ | ESTER RESISTANT |
| AJA | ETHYLENE GLYCOL RESISTANT |
| AAJ | FIRE RESISTANT |
| AGC | FIRE RETARDANT |
| AAL | FUEL RESISTANT |
| ACQ | GREASE RESISTANT |
| AAP | HEAT RESISTANT |
| ADS | HYDRAULIC SOLUTION RESISTANT |
| AJB | INCOMBUSTIBLE |
| ACR | KETONE RESISTANT |
| AEM | LIGHT RESISTANT |
| AGF | LOW TEMPERATURE |
| ACC | MILDEW RESISTANT |
| AAX | OIL RESISTANT |
| AJC | OXIDATION RESISTANT |
| ACN | OZONE RESISTANT |
| AJD | PAINT RESISTANT |
| ACP | PETROLEUM RESISTANT |
| ABA | SALT WATER RESISTANT |
| ABB | SAND PROOF |
| ABE | SHOCK RESISTANT |
| ABF | SOLVENT RESISTANT |
| ABT | SPRAY TIGHT |
| ACW | STEAM RESISTANT |
| AHC | VIBRATION |
| ABH | VIBRATION PROOF |
| ABJ | VIBRATION RESISTANT |
| ACM | WATER RESISTANT |
| ABK | WATERPROOF |
| ABN | WEATHER RESISTANT |
| ABM | WEATHERPROOF |
CQCS*HLAYER COMPOSITION AND LOCATION
THE MATERIAL AND FORMATION IDENTIFYING THE STRUCTURAL CHARACTERISTIC/S/ OF THE ITEM AND LOCATION.
Enter the applicable Reply Code from Tables 1 & 2 below.
(CQCSHGKS2.0*;CQCSHGKS2.0$HGKS2.0*;CQCSHGKS2.0$$HGKS2.1*)
| Table 1 |
| Reply Code (AN92) | Reply |
| L | 10TH LAYER |
| M | 11TH LAYER |
| B | 1ST LAYER |
| C | 2ND LAYER |
| D | 3RD LAYER |
| E | 4TH LAYER |
| F | 5TH LAYER |
| G | 6TH LAYER |
| H | 7TH LAYER |
| J | 8TH LAYER |
| K | 9TH LAYER |
| N | OUTER LAYER |
| Table 2 |
| Reply Code (AD14) | Reply |
| AD | BRAIDED ALUMINUM ALLOY WIRE |
| FX | BRAIDED ASBESTOS CORD |
| DE | BRAIDED BRONZE WIRE |
| AE | BRAIDED COPPER WIRE |
| AG | BRAIDED CORROSION RESISTANT STEEL WIRE |
| KL | BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| ZZ | BRAIDED COTTON CORD |
| EW | BRAIDED FABRIC |
| DX | BRAIDED FIBER |
| HC | BRAIDED FIBERGLASS CORD |
| KM | BRAIDED NICKEL COPPER ALLOY WIRE |
| AB | BRAIDED POLYAMIDE CORD |
| FP | BRAIDED POLYESTER CORD |
| AC | BRAIDED RAYON CORD |
| EA | BRAIDED SISAL FIBER |
| AF | BRAIDED STEEL WIRE |
| EF | BRAIDED SYNTHETIC CORD |
| HF | BRAIDED SYNTHETIC YARN |
| HG | BRAIDED TEXTILE FIBER |
| EQ | BRAIDED TEXTILE YARN |
| DM | BRAIDED WIRE |
| AJ | CORRUGATED ALUMINUM ALLOY |
| AK | CORRUGATED COPPER |
| AL | CORRUGATED CORROSION RESISTANT STEEL |
| AM | CORRUGATED STEEL |
| SK | CORRUGATED, POLYVINYLCHLORIDE |
| FE | COTTON |
| MN | FIBERGLASS CLOTH |
| NG | FIBERGLASS CLOTH, SILICONE RUBBER IMPREGNATED |
| NM | FIBERGLASS CORD |
| AR | HELIX ALUMINUM ALLOY COIL |
| AS | HELIX COPPER COIL |
| AT | HELIX CORROSION RESISTANT STEEL COIL |
| AU | HELIX STEEL COIL |
| DQ | HELIX WIRE COIL |
| SL | HELIX, NYLON MONOFILAMENT |
| HN | LACQUER IMPREGNATED BRAIDED COTTON CORD |
| FK | LINEN |
| KN | MOLDED PLASTIC |
| AV | MOLDED POLYTETRAFLUOROETHYLENE |
| KP | MOLDED POLYURETHANE |
| AW | MOLDED RUBBER |
| FG | MOLDED RUBBER, BUNA-N |
| GA | MOLDED RUBBER, BUNA-S |
| DD | MOLDED RUBBER, CHLOROPRENE |
| DB | MOLDED RUBBER, COMPOSITION |
| KQ | MOLDED RUBBER, ETHYLENE PROPYLENE |
| EB | MOLDED RUBBER, NATURAL |
| HP | MOLDED RUBBER, NEOPRENE |
| KJ | MOLDED RUBBER, NITRILE |
| HR | MOLDED RUBBER, SAE J14, CLASS SC |
| DA | MOLDED RUBBER, SYNTHETIC |
| PJ | PLASTIC, POLYVINYL CHLORIDE |
| PQ | POLYAMIDE CLOTH |
| GK | POLYESTER |
| DR | POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER |
| FY | RUBBER COMPOSITION |
| BC | RUBBER IMPREGNATED BRAIDED ALUMINUM ALLOY WIRE |
| BD | RUBBER IMPREGNATED BRAIDED COPPER WIRE |
| BE | RUBBER IMPREGNATED BRAIDED CORROSION RESISTANT STEEL WIRE |
| AZ | RUBBER IMPREGNATED BRAIDED COTTON CORD |
| DG | RUBBER IMPREGNATED BRAIDED FABRIC |
| BA | RUBBER IMPREGNATED BRAIDED POLYAMIDE CORD |
| BB | RUBBER IMPREGNATED BRAIDED RAYON CORD |
| BF | RUBBER IMPREGNATED BRAIDED STEEL WIRE |
| BG | RUBBER IMPREGNATED COTTON FABRIC |
| DJ | RUBBER IMPREGNATED FABRIC |
| GG | RUBBER IMPREGNATED FIBERGLASS FABRIC |
| ST | RUBBER IMPREGNATED HELIX WIRE COIL |
| HZ | RUBBER IMPREGNATED NYLON |
| BH | RUBBER IMPREGNATED POLYAMIDE FABRIC |
| BJ | RUBBER IMPREGNATED RAYON FABRIC |
| JB | RUBBER IMPREGNATED WIRE |
| FC | RUBBER IMPREGNATED WOVEN COTTON CORD |
| DF | RUBBER IMPREGNATED WOVEN FABRIC |
| SR | RUBBER, GRADE 149FS75, B F GOODRICH |
| EC | RUBBER, SYNTHETIC |
| BK | SHEET RUBBER |
| BM | SPIRAL INTERLOCKED COPPER |
| BR | SPIRAL INTERLOCKED CORROSION RESISTANT STEEL |
| BX | SPIRAL INTERLOCKED CORROSION RESISTANT STEEL WITH PACKING |
| BN | SPIRAL INTERLOCKED COTTON |
| BQ | SPIRAL INTERLOCKED RAYON |
| BS | SPIRAL INTERLOCKED STEEL |
| BY | SPIRAL INTERLOCKED STEEL WITH PACKING |
| EP | SPIRALLY LAID BRASS WIRE |
| CD | SPIRALLY LAID COPPER WIRE |
| DZ | SPIRALLY LAID CORD STRANDS |
| CE | SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| BZ | SPIRALLY LAID COTTON CORD |
| CA | SPIRALLY LAID POLYAMIDE CORD |
| CB | SPIRALLY LAID RAYON CORD |
| CF | SPIRALLY LAID STEEL WIRE |
| CK | SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| SM | SPIRALLY WRAPPED COTTON DUCK |
| SN | SPIRALLY WRAPPED COTTON DUCK, RUBBER IMPREGNATED |
| CG | SPIRALLY WRAPPED COTTON FABRIC |
| SP | SPIRALLY WRAPPED DUCK |
| SQ | SPIRALLY WRAPPED DUCK, RUBBER IMPREGNATED |
| EY | SPIRALLY WRAPPED FABRIC |
| KR | SPIRALLY WRAPPED POLYAMIDE FABRIC |
| CH | SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE FABRIC |
| DS | SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER |
| KS | SPIRALLY WRAPPED RAYON FABRIC |
| CJ | SPIRALLY WRAPPED RUBBER FABRIC |
| CL | SPIRALLY WRAPPED STEEL FABRIC |
| DP | WIRE REINFORCED |
| CW | WOVEN COTTON CORD |
| KT | WOVEN COTTON WITH INTERWOVEN STEEL WIRE |
| JX | WOVEN DACRON |
| ED | WOVEN FABRIC |
| CY | WOVEN POLYAMIDE CORD |
| CX | WOVEN POLYESTER FIBER CORD |
| CZ | WOVEN RAYON CORD |
| DC | WRAPPED RUBBER, CHLOROPRENE |
| EJ | WRAPPED RUBBER, COMPOSITION |
| DY | WRAPPED RUBBER, NATURAL |
| DK | WRAPPED RUBBER, SYNTHETIC |
ACKH*JMINIMUM INSIDE BENDING RADIUS
THE MINIMUM INSIDE BENDING RADIUS FORMED WITHOUT STRESSING OR DEFORMATION OF A FLEXIBLE ITEM.
Enter the applicable Reply Code from Table 1 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ACKHJA2.0*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
CRWL*DINSIDE SURFACE CONDITION
THE CONDITION OF THE ITEM WITH RESPECT TO THE TEXTURE OF THE INNER SURFACE.
Enter the applicable reply code from the table below
(CRWLDCV)
| Table 1 |
| Reply Code (AN72) | Reply |
| CV | CONVOLUTED |
| RG | ROUGH |
| SM | SMOOTH |
MATT*DMATERIAL
THE CHEMICAL COMPOUND OR MECHANICAL MIXTURE PROPERTIES OF WHICH THE ITEM IS FABRICATED.
Enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Table 2
(MATT3BBLDRC0023*;MATT3BBLDRC0023$DPCAD00*;MATT3BBLDRC0023$$DPCAD00*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3ADP | RETAINER |
| 3ADW | TUBE |
| 3AEE | OVERALL |
| 3AUC | INSIDE |
| 3AUW | OUTSIDE |
| 3AVU | SLEEVE |
| 3BBI | BAND |
| 3BBL | COVER |
| 3CFJ | SHOULDER |
| 3CUT | BALL END |
| 3DPT | BALL BEARING |
| 3DPU | BRAZING RING |
| 3DPV | CLAMP |
| 3DPW | ELBOW |
| 3DQB | TAILPIECE |
| 3DQD | UNION |
| 3DQE | LOCK RING |
| 3DQF | HOSE GROMMET |
| 3DQJ | SHORT SWIVEL NUT |
| 3DQK | TEE |
| 3DQL | REINFORCEMENT |
| 3DQM | OUTSIDE COVERING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (MA01) | Reply |
| ALB000 | ALUMINUM ALLOY |
| CRA000 | CHROMIUM |
| CUB000 | COPPER ALLOY |
| CU0079 | COPPER ALLOY 260 |
| CU0304 | COPPER ALLOY 262 |
| CU0080 | COPPER ALLOY 268 |
| CU0081 | COPPER ALLOY 270 |
| CU0272 | COPPER ALLOY 272 |
| CU0274 | COPPER ALLOY 274 |
| CU0302 | COPPER ALLOY 280 |
| CU0330 | COPPER ALLOY 330 |
| CU0305 | COPPER ALLOY 331 |
| CU0332 | COPPER ALLOY 332 |
| CU0335 | COPPER ALLOY 335 |
| CU0340 | COPPER ALLOY 340 |
| CU0088 | COPPER ALLOY 342 |
| CU0306 | COPPER ALLOY 344 |
| CU0307 | COPPER ALLOY 345 |
| CU0308 | COPPER ALLOY 347 |
| CU0309 | COPPER ALLOY 348 |
| CU0310 | COPPER ALLOY 350 |
| CU0089 | COPPER ALLOY 353 |
| CU0090 | COPPER ALLOY 356 |
| CU0091 | COPPER ALLOY 360 |
| CU0370 | COPPER ALLOY 370 |
| CU0098 | COPPER ALLOY 462 |
| CU0099 | COPPER ALLOY 464 |
| CU0465 | COPPER ALLOY 465 |
| CU0466 | COPPER ALLOY 466 |
| CU0467 | COPPER ALLOY 467 |
| CU0100 | COPPER ALLOY 482 |
| CU0101 | COPPER ALLOY 485 |
| GSA000 | GLASS |
| GSB000 | GLASS FIBER |
| NLA000 | NICKEL |
| NLB000 | NICKEL ALLOY |
| PCA000 | PLASTIC |
| PCB000 | PLASTIC ACETAL |
| PCBL00 | PLASTIC ACRYLONITRILE-BUTADIENE-STYRENE (ABS) |
| PCAN00 | PLASTIC CELLULOSE ACETATE |
| PCBN00 | PLASTIC CELLULOSE ACETATE BUTYRATE |
| PCH000 | PLASTIC EPOXY |
| PCN000 | PLASTIC PHENOLIC |
| PCP000 | PLASTIC POLYAMIDE (NYLON) |
| PCW000 | PLASTIC POLYESTER |
| PCX000 | PLASTIC POLYETHYLENE |
| PCAM00 | PLASTIC POLYHEXAMETHYLENE AMIDE |
| PCAA00 | PLASTIC POLYHEXAMETHYLENE SEBACAMIDE |
| PCAC00 | PLASTIC POLYPROPYLENE |
| PCAD00 | PLASTIC POLYSTYRENE |
| PCAF00 | PLASTIC POLYTETRAFLUOROETHYLENE |
| PCAH00 | PLASTIC POLYURETHANE |
| PCCD00 | PLASTIC POLYVINYL |
| PCBM00 | PLASTIC POLYVINYL ACETATE |
| PCAJ00 | PLASTIC POLYVINYL CHLORIDE (PVC) |
| PCAW00 | PLASTIC TETRAFLUOROETHYLENE |
| PCAP00 | PLASTIC VINYL |
| RSG000 | RESIN EPOXY |
| RCE000 | RUBBER |
| RC0024 | RUBBER BUTADIENE CLASS BR |
| RC0019 | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| RC0022 | RUBBER BUTADIENE-STYRENE CLASS SBR |
| RC0007 | RUBBER CHLOROPRENE CLASS CR |
| RC0005 | RUBBER EPICHLOROHYDRIN HOMOPOLYMER CLASS CO |
| RC0008 | RUBBER EPICHLOROHYDRIN-ETHYLENE OXIDE CLASS ECO |
| RC0009 | RUBBER ETHYLENE-PROPYLENE CLASS EPM |
| RC0010 | RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM |
| RC0013 | RUBBER FLUOROCARBON CLASS FPM |
| RCX000 | RUBBER ISOBUTYLENE ISOPRENE |
| RC0017 | RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR |
| RCA000 | RUBBER NATURAL |
| RC0001 | RUBBER POLYACRYLATE CLASS ACM |
| RC0020 | RUBBER POLYISOPRENE NATURAL CLASS NR |
| RC0023 | RUBBER POLYSULFIDE CLASS T |
| RCC000 | RUBBER SILICONE |
| RC0021 | RUBBER SILICONE CLASS Q |
| RCB000 | RUBBER SYNTHETIC |
| SLK000 | SILICONE |
| STA000 | STEEL |
| ST1008 | STEEL COMP 1008 |
| ST1009 | STEEL COMP 1009 |
| ST1010 | STEEL COMP 1010 |
| ST1012 | STEEL COMP 1012 |
| ST1015 | STEEL COMP 1015 |
| ST1018 | STEEL COMP 1018 |
| ST1020 | STEEL COMP 1020 |
| ST0302 | STEEL COMP 302 |
| ST0321 | STEEL COMP 321 |
| ST0347 | STEEL COMP 347 |
| ST0348 | STEEL COMP 348 |
| ST0410 | STEEL COMP 410 |
| ST0977 | STEEL COMP Z6CNNB18-10 |
| STB000 | STEEL CORROSION RESISTING |
Reply to this requirement only if the MRC for Material has been answered and there is additional standard specifications that need to be identified on the Material reply.
MDCL*JMATERIAL DOCUMENT AND CLASSIFICATION
THE SPECIFICATION, STANDARD, OR MANUFACTURER'S REFERENCE AND THE CLASSIFICATION DESIGNATION, SUCH AS CLASS, CONDITION, TEMPER, AND THE LIKE, THAT IDENTIFIES THE MATERIAL.
Enter the applicable Reply Code from Tables 1 & 2 below followed by an alpha-numeric reply with a minimum of one character as in the first, second, and third examples. If ISAC coding is authorized for this requirement, enter the applicable ISAC from Table 1 below followed by the mode code and applicable Reply Code from Tables 2 & 3 below followed by an alpha-numeric reply with a minimum of one character as in the fourth, fifth, and sixth examples.
(MDCLJEATEXT1234*;MDCLJEATEXT1234$$JEATEXT1234*;MDCLJEATEXT1234$JEATEXT1234*;MDCL1BJEATEXT1234*;MDCL1BJEATEXT1234$$JEATEXT1234*;MDCL1BJEATEXT1234$JEATEXT1234*)
| Table 1 |
| ISAC Field Indicator (5000) | Location |
| 3AAT | BODY |
| 3ACU | FLANGE |
| 3ADP | RETAINER |
| 3ADW | TUBE |
| 3AEE | OVERALL |
| 3AUC | INSIDE |
| 3AUW | OUTSIDE |
| 3AVU | SLEEVE |
| 3BBI | BAND |
| 3BBL | COVER |
| 3CFJ | SHOULDER |
| 3CUT | BALL END |
| 3DPT | BALL BEARING |
| 3DPU | BRAZING RING |
| 3DPV | CLAMP |
| 3DPW | ELBOW |
| 3DQB | TAILPIECE |
| 3DQD | UNION |
| 3DQE | LOCK RING |
| 3DQF | HOSE GROMMET |
| 3DQJ | SHORT SWIVEL NUT |
| 3DQK | TEE |
| 3DQL | REINFORCEMENT |
| 3DQM | OUTSIDE COVERING |
| 3HOU | LOCATION NOT OTHERWISE SPECIFIED |
| Table 2 |
| Reply Code (AP33) | Reply |
| Q | AEROSPACE MATERIAL SPEC STD |
| J | AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) |
| G | ASSN STD |
| A | COMMERCIAL ITEM DESCRIPTION |
| K | DEF STAN/SPEC |
| B | FED SPEC |
| C | FED STD |
| L | GOVERNMENT STD/SPEC |
| N | INTERNATIONAL STD/SPEC |
| F | MFR REF |
| D | MIL SPEC |
| E | MIL STD |
| H | NATIONAL SPEC |
| P | NATIONAL STD |
| M | NATIONAL STD/SPEC |
| Table 3 |
| Reply Code (AP18) | Reply |
| M | 10TH MATERIAL RESPONSE |
| N | 11TH MATERIAL RESPONSE |
| P | 12TH MATERIAL RESPONSE |
| Q | 13TH MATERIAL RESPONSE |
| R | 14TH MATERIAL RESPONSE |
| S | 15TH MATERIAL RESPONSE |
| T | 16TH MATERIAL RESPONSE |
| U | 17TH MATERIAL RESPONSE |
| W | 18TH MATERIAL RESPONSE |
| X | 19TH MATERIAL RESPONSE |
| B | 1ST MATERIAL RESPONSE |
| Y | 20TH MATERIAL RESPONSE |
| Z | 21ST MATERIAL RESPONSE |
| V | 22ND MATERIAL RESPONSE |
| C | 2ND MATERIAL RESPONSE |
| D | 3RD MATERIAL RESPONSE |
| E | 4TH MATERIAL RESPONSE |
| F | 5TH MATERIAL RESPONSE |
| H | 6TH MATERIAL RESPONSE |
| J | 7TH MATERIAL RESPONSE |
| K | 8TH MATERIAL RESPONSE |
| L | 9TH MATERIAL RESPONSE |
| G | ALL MATERIAL RESPONSES |
| A | SINGLE MATERIAL RESPONSE |
CBBL*DFEATURES PROVIDED
THOSE FEATURES,NOT OTHERWISE SPECIFIED,WHICH MAY BE REQUIRED FOR PROPER FUNCTIONING OF THE ITEM.
Enter the applicable reply code from the table below
(CBBLDAAK*;CBBLDABN$$DASH*)
| Table 1 |
| Reply Code (AN47) | Reply |
| AAK | ELECTROSTATIC DISCHARGE CAPABILITY |
| FVT | IDENTICAL ENDS |
| ABN | INTERNAL SUPPORT |
| ABP | NONSKIVE |
| ABR | PERFORATED OUTER COVER |
| ABT | SELF-SEALING |
| ASH | SPIRAL SPRING COILED |
TEST*JTEST DATA DOCUMENT
THE SPECIFICATION,STANDARD,DRAWING,OR SIMILAR INSTRUMENT THAT SPECIFIES ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS OR TEST CONDITIONS UNDER WHICH AN ITEM IS TESTED AND ESTABLISHES ACCEPTABLE LIMITS WITHIN WHICH THE ITEM MUST CONFORM IDENTIFIED BY AN ALPHABETIC AND/OR NUMERIC REFERENCE NUMBER. INCLUDES THE COMMERCIAL AND GOVERNMENT ENTITY (CAGE) CODE OF THE ENTITY CONTROLLING THE INSTRUMENT.
Enter the applicable Reply Code from the table below, followed by the 5-position CAGE Code, a dash, and the document identification number.
(TESTJA12345-CWX654321*; TESTJA1234A-654321$$JB5556A-663654*; TESTJAA2345-654321$JB55566-663654*)
| Table 1 |
| Reply Code (AC28) | Reply |
| A | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| B | STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| C | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
SPCL*GSPECIAL TEST FEATURES
TEST CONDITIONS AND RATINGS OR ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS THAT ARE DIFFERENT, MORE CRITICAL, OR MORE SPECIFIC THAN THOSE SPECIFIED IN A GOVERNING TEST DATA DOCUMENT.
Enter the reply in clear text.
(SPCLGSELECTED AND TESTED FOR NAVIGATIONAL SYSTEMS*)
MARK*GSPECIAL MARKINGS
MARKINGS INCLUDED ON AN ITEM FOR THE PURPOSE OF OFFERING INSTRUCTIONS OR WARNINGS OR TO INDICATE THE PURPOSE, FUNCTION, OR APPLICATION OF THE ITEM. EXCLUDES MANUFACTURER'S PART NUMBERS, SYMBOLS, OR THE LIKE.
Enter clear text.
(MARKGCLEARTEXT)
SUPP*GSUPPLEMENTARY FEATURES
CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN ANY OTHER REQUIREMENT THAT ARE CONSIDERED ESSENTIAL INFORMATION FOR ONE OR MORE FUNCTIONS, EXCLUDING NSN ASSIGNMENT.
Enter the reply in clear text.Separate multiple replies with a semicolon.
(SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT* SUPPGMAY INCL HOLE IN UPPER SUPPORT FOR MTG DURING SHIPMENT; BLADE TIEDOWN*)
This MRC replaced MRC ZZZP
The FSCM identifies the manufacturer or Government agency whose number appears in the Part Number column. When an FSCM does not appear in the current issue of H4-1, H4-2, or H4-3 Cataloging Handbooks, the word "None" will appear in the FSCM column and the name and address of the manufacturer or Government agency will be shown in parentheses following the item description.
PDNB*APURCHASE DESCRIPTION IDENTIFICATION
THE CONTROLLING ACTIVITY AND IDENTIFICATION OF A DOCUMENT USED IN LIEU OF A SPECIFICATION IN THE PROCUREMENT OF AN ITEM OF SUPPLY.
Enter the manufacturers 5-Digit Commercial and Government Entity (CAGE) Code listed in the FEDERAL SUPPLY CODE FOR MANUFACTURERS (FSCM) handbook, followed by a dash and the identifying number of the document, followed by a dash and the identifying number of the document.
(PDNBA81A37-30624A*)
ZZZV*GFSC APPLICATION DATA
THE JUSTIFICATION FOR THE ASSIGNMENT OF A FEDERAL SUPPLY CLASS /FSC/ TO AN ITEM BASED ON THE CLASSIFICATION OF THE NEXT HIGHER CLASSIFIABLE ASSEMBLY.
Enter the name of the next higher classifiable assembly in clear text.
(ZZZVGFUEL SYSTEM, GASOLINE ENGINE, NONAIRCRAFT*)
HZRD*DHAZARDOUS SUBSTANCES
THE SUBSTANCES AND/OR MATERIALS CONTAINED IN THE ITEM THAT HAVE BEEN IDENTIFIED AS HAZARDOUS OR ENVIRONMENTALLY DAMAGING BY THE ENVIRONMENTAL PROTECTION AGENCY OR OTHER AUTHORIZED GOVERNMENT AGENCY.
Enter the applicable reply code from the table below
(HZRDDHAZ029*;HZRDDHAZ011$$DHAZ008*)
| Table 1 |
| Reply Code (HZ00) | Reply |
| HAZ008 | CADMIUM |
| HAZ011 | CHROMIUM |
| HAZ029 | LEAD |
Reply to this MRC in accordance with Volume 3.
AGAV*GEND ITEM IDENTIFICATION
THE NATIONAL STOCK NUMBER OR THE IDENTIFICATION INFORMATION OF THE END EQUIPMENT FOR WHICH THE ITEM IS A PART.
Enter the reply in clear text.
(AGAVG3930-00-000-0000*; AGAVGFORKLIFT TRUCK, SMITH CORPORATION, MODEL 12, TYPE A*)
AAGT*JWALL THICKNESS
A MEASUREMENT OF THE SMALLEST DIMENSION OF THE WALL,IN DISTINCTION FROM LENGTH OR WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(AAGTJAA2.0*;AAGTJAA2.0$$JAA2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ABKV*JOUTSIDE DIAMETER
THE LENGTH OF A STRAIGHT LINE WHICH PASSES THROUGH THE CENTER OF A CIRCULAR FIGURE OR BODY,AND TERMINATES AT THE OUTSIDE CIRCUMFERENCE.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ABKVJAB2.0*;ABKVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJT*JINSIDE WIDTH
AN INSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJTJAC2.0*;ADJTJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJU*JINSIDE LENGTH
A MEASUREMENT OF THE LONGEST INSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJUJAC2.0*;ADJUJAC2.0$$JAC2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJV*JOUTSIDE WIDTH
AN OUTSIDE MEASUREMENT TAKEN AT RIGHT ANGLES TO THE LENGTH OF AN ITEM,IN DISTINCTION FROM THICKNESS.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJVJAB2.0*;ADJVJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ADJW*JOUTSIDE LENGTH
A MEASUREMENT OF THE LONGEST OUTSIDE DIMENSION OF AN ITEM,IN DISTINCTION FROM WIDTH.
Enter the applicable Reply Code from Tables 1 & 2 below followed by a numeric reply with a minimum of one digit, a decimal and a minimum of one digit.
(ADJWJAB2.0*;ADJWJAB2.0$$JAB2.1*)
| Table 1 |
| Reply Code (AA05) | Reply |
| A | INCHES |
| L | MILLIMETERS |
| Table 2 |
| Reply Code (AC20) | Reply |
| A | NOMINAL |
| B | MINIMUM |
| C | MAXIMUM |
ENAC*DENVIRONMENTAL ATTRIBUTE CODE
INDICATES THE TYPE OF PRODUCT THAT MEETS OR EXCEEDS THE GOVERNMENT GUIDELINES FOR ENVIRONMENTALLY PREFERRED CHARACTERISTICS.
Enter the applicable reply code from the table below
(ENACDNR*;ENACDFA$DNZ*;ENACDFA$$DNZ*)
| Table 1 |
| Reply Code (EN02) | Reply |
| FA | COMPREHENSIVE PROCUREMENT GUIDELINE - LANDSCAPING PRODUCTS - GARDEN AND SOAKER HOSES |
| NZ | PLASTICS REMOVAL IN THE MARINE ENVIRONMENT (PRIME) PRODUCT |
| NR | REVIEWED - DOES NOT MEET SOME ENAC CRITERIA |
FEAT*GSPECIAL FEATURES
THOSE UNUSUAL OR UNIQUE CHARACTERISTICS OR QUALITIES OF AN ITEM NOT COVERED IN THE OTHER REQUIREMENTS AND WHICH ARE DETERMINED TO BE ESSENTIAL FOR IDENTIFICATION ON ONE OR MORE OTHER FUNCTIONS.
Enter the reply in clear text. Separate multiple replies with a semicolon.
(FEATGADJUSTABLE NOSE CLIP*; FEATGADJUSTABLE NOSE PIECE; DISPOSABLE*)
ZZZK*JSPECIFICATION/STANDARD DATA
THE DOCUMENT DESIGNATOR OF THE SPECIFICATION OR STANDARD WHICH ESTABLISHED THE ITEM OF SUPPLY.
Enter the applicable Reply Code from the table below, followed by the Commercial and Government Entity (CAGE) Code of the entity controlling the document, a dash, and the document designator. The agency that controls the limited coordination document must be preceded and followed by a slash following the designator. The word canceled or superseded must be preceded and followed by a slash for the designator. Professional and industrial association specifications/standards are differentiated from a manufacturer's specification in that the data has been coordinated and published by the professional and industrial association. Include amendments and revisions where applicable.
(ZZZKJT81337-30642B*;ZZZKJS81349-MIL-D-180 REV1/CANCELED/*;ZZZKJP80205-NAS1103*;ZZZKJS81349-MIL-C-1140C/CE/*;ZZZKJT81337-30642B$$JP80205-NAS1103*)
| Table 1 |
| Reply Code (AN62) | Reply |
| V | FEDERAL MOTOR VEHICLE SAFETY STANDARD |
| F | FLAMMABILITY STANDARD |
| S | GOVERNMENT SPECIFICATION |
| T | GOVERNMENT STANDARD |
| U | INTERNATIONAL STD/SPEC |
| D | MANUFACTURERS SOURCE CONTROL |
| R | MANUFACTURERS SPECIFICATION |
| N | MANUFACTURERS SPECIFICATION CONTROL |
| M | MANUFACTURERS STANDARD |
| B | NATIONAL STD/SPEC |
| A | PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| P | PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
If the specification/standard cited in reply to MRC ZZZK is nondefinitive, reply to MRC ZZZT. This reply is the data which is not recorded in Segment C.
ZZZT*JNONDEFINITIVE SPEC/STD DATA
THE NUMBER, LETTER, OR SYMBOL INDICATING THE TYPE, STYLE, GRADE, CLASS, AND THE LIKE OF AN ITEM IN A NONIDENTIFYING SPECIFICATION OR STANDARD.
Enter the applicable Reply Code from the table below followed by the appropriate number, letter or symbol.
(ZZZTJTY1*; ZZZTJTY1$$JSTA*; ZZZTJTY1$JSTA*)
| Table 1 |
| Reply Code (AD08) | Reply |
| AL | ALLOY |
| BE | ANNEALED |
| AN | ANNEX |
| AP | APPENDIX |
| AC | APPLICABILITY CLASS |
| AR | ARRANGEMENT |
| AS | ASSEMBLY |
| AB | ASSORTMENT |
| BF | BOND |
| BX | BOX |
| CY | CAPACITY |
| CA | CASE |
| CT | CATEGORY |
| CF | CIRCUMFERENCE |
| CL | CLASS |
| CE | CODE |
| CR | COLOR |
| CC | COMBINATION CODE |
| CN | COMPONENT |
| CP | COMPOSITION |
| CM | COMPOUND |
| CD | CONDITION |
| AV | CONFIGURATION |
| CS | CONSTRUCTION |
| BG | CORE CONDITION |
| CB | CUT OFF |
| AM | DELAY CLASS |
| DE | DESIGN |
| DG | DESIGNATOR |
| DW | DRAWING NUMBER |
| DU | DUPLEX |
| EG | EDGE |
| EN | END |
| FY | FAMILY |
| FG | FIGURE |
| AK | FILE NUMBER |
| FN | FINISH |
| FB | FLAVOR |
| BH | FLUX PERCENTAGE |
| FM | FORM |
| FA | FORMULA |
| AJ | GAGE STOCK NUMBER |
| GR | GRADE |
| GA | GRADUATION |
| AX | GRANULES |
| AY | GRIT |
| GB | GROUND |
| GP | GROUP |
| HA | HEAVY DUTY |
| BA | IMAGE COLOR |
| NS | INSERT |
| TM | ITEM |
| KD | KIND |
| KT | KIT |
| LG | LENGTH |
| LV | LEVEL |
| LT | LIMIT |
| MK | MARK |
| AA | MARKER |
| AD | MASK APERTURE |
| ML | MATERIAL |
| BB | MAXIMUM DENSITY |
| TA | MEDIUM TEMPER |
| MH | MESH |
| ME | METHOD |
| BC | MINIMUM DENSITY |
| MD | MODEL |
| MT | MOUNTING |
| AQ | NATURAL |
| AU | NON-DELAY CLASS |
| NR | NUMBER |
| BL | OUTFIT NUMBER |
| PA | PARAGRAPH |
| PT | PART |
| PN | PATTERN |
| PC | PHYSICAL CONDITION |
| PS | PIECE |
| PL | PLAN |
| PR | POINT |
| PD | POLISHED |
| PB | PRESSURE RATING |
| QA | QUALITY |
| QB | QUENCHED |
| RN | RANGE |
| AE | RAPID |
| RT | RATING |
| RF | REFERENCE NUMBER |
| RA | REGULAR DUTY |
| BJ | RMA FLUX |
| SJ | SALIENT CHARACTERISTICS |
| SC | SCHEDULE |
| SB | SECTION |
| SL | SELECTION |
| BD | SERIALIZED |
| SE | SERIES |
| SV | SERVICE |
| SX | SET |
| SA | SHADE |
| SH | SHAPE |
| SG | SHEET |
| SZ | SIZE |
| AG | SLOW |
| TC | SOFT TEMPER |
| SK | SOURCE |
| PZ | SPECIES |
| SQ | SPECIFICATION SHEET |
| SD | SPEED |
| AW | STANDARD |
| SR | STRAIGHT |
| ST | STYLE |
| SS | SUBCLASS |
| SF | SUBFORM |
| SP | SUBTYPE |
| BK | SUPPORT |
| SN | SURFACE CONDITION |
| SY | SYMBOL |
| SM | SYSTEM |
| TB | TABLE |
| TN | TANNAGE |
| TP | TEMPER |
| TX | TEXTURE |
| TK | THICKNESS |
| TT | TREATMENT |
| TR | TRIM |
| TY | TYPE |
| YN | UNIT |
| AZ | UNSERIALIZED |
| VA | VARIETY |
| WT | WEIGHT |
| WD | WIDTH |
ZZZY*GREFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS
A FEATURE OF THE ITEM OF SUPPLY WHICH MUST BE SPECIFICALLY RECORDED WHEN THE REFERENCE NUMBER COVERS A RANGE OF ITEMS.
Enter the reply in clear text.
(ZZZYGCOLOR CODED LEADS*; ZZZYGAS DIFFERENTIATED BY MATERIAL*)
Reply to this requirement only if the header record for the item identification for the item being identified has been coded as critical.
CRTL*ACRITICALITY CODE JUSTIFICATION
THE MASTER REQUIREMENT CODES OF THOSE REQUIREMENTS WHICH ARE TECHNICALLY CRITICAL BY REASON OF TOLERANCE,FIT,PERFORMANCE,OR OTHER CHARACTERISTICS WHICH AFFECT IDENTIFICATION OF THE ITEM.
Enter the Master Requirement Code for the requirement, the reply to which renders the item as being critical.
(CRTLAAKJA*; CRTLAAKJA$$ACSGS*)
If document availability code B, D, F, OR H, reply to MRC PRPY.
PRPY*APROPRIETARY CHARACTERISTICS
IDENTIFICATION OF THOSE CHARACTERISTICS INCLUDED IN THE DESCRIPTION FOR WHICH A NON-GOVERNMENT ACTIVITY HAS IDENTIFIED ALL OR SELECTED CHARACTERISTICS OF THE ITEM AS BEING PROPRIETARY AND THEREFORE RESTRICTED FROM RELEASE OUTSIDE THE GOVERNMENT WITHOUT PRIOR PERMISSION OF THE ORIGINATOR OF THE DATA.
Enter the MRC codes of the individual characteristics of the description which are marked proprietary on the technical data, using and coding ($) for multiple characteristics. If all the MRCS are proprietary, enter the reply PACS. If none of the MRCS is proprietary, enter the reply NPAC.
(PRPYAPACS*;PRPYANPAC*; PRPYAMATL$$ASURF*)
ELRN*GEXTRA LONG REFERENCE NUMBER
A REFERENCE NUMBER EXCEEDING 32 POSITIONS.
Enter the entire reference number. Do not include the 5-position Commercial and Government Entity (CAGE) Code unless there is more than one extra long reference number on the NSN.If there is more than one extra long reference number on the NSN, include the CAGE or NCAGE and separate each reference by using the "&" character.
(e.g., CAGE112036BIL060557LEN313605UZ62365 & CAGE112036BIL060557LEN313605UZ62365)
In determining quantity of characters in the reference number, count will be made after modification in accordance with Volume 2, Chapter 9, FLIS Procedures Manual, DoD 4100.39-M.
CXCY*GPART NAME ASSIGNED BY CONTROLLING AGENCY
THE NAME ASSIGNED TO THE ITEM BY THE GOVERNMENT AGENCY OR COMMERCIAL ORGANIZATION CONTROLLING THE DESIGN OF THE ITEM.
Enter the reply in clear text.
(CXCYGLINE PROCESSOR CONTROL BOARD*)
CLQL*GCOLLOQUIAL NAME
A COMMON USAGE NAME BY WHICH AN ITEM IS KNOWN.
Enter the reply in clear text.
(CLQLGWOVEN WIRE CLOTH*)
FSC Information